Scribd
Upload
1K views1 page

JSW Steel Limited

This certificate summarizes the chemical composition and mechanical properties test results for a shipment of 22.37 metric tons of hot rolled carbon steel sheet and strip from JSW Steel Limited conforming to IS 1079_2017 Grade HR2 specifications. Key results include a carbon content of 0.063%, yield strength of 266 MPa, tensile strength of 368 MPa, and elongation of 34%. The material passed all tests for bendability and contains no radioactive or hazardous substances above natural levels.

Uploaded by

Venkatesh Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

JSW Steel Limited

This certificate summarizes the chemical composition and mechanical properties test results for a shipment of 22.37 metric tons of hot rolled carbon steel sheet and strip from JSW Steel Limited conforming to IS 1079_2017 Grade HR2 specifications. Key results include a carbon content of 0.063%, yield strength of 266 MPa, tensile strength of 368 MPa, and elongation of 34%. The material passed all tests for bendability and contains no radioactive or hazardous substances above natural levels.

Uploaded by

Venkatesh Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

IS 1079_2017

JSW STEEL LIMITED


Vijayanagar Works, PO- Vidyanagar, Village-Toranagallu,Dist: Bellary,Karnataka-583275,INDIA
Regd. Office: JSW Centre , Bandra Kurla Complex , Bandra (East) , Mumbai - 400 051
HOT ROLLED CARBON STEEL SHEET AND STRIP AS PER IS: 1079_2017
CM/L - 6176976
Test Certificate : HR/22-23/0002449202 Date : 26.08.2022
To M/S. RAJASTHAN STEEL SUPPLIERS SO No./ Item : 401644170 / 10
NEW NO.64 OLD NO.56 SEMBUDOSS STR Product : HRPO / HRSPO
CHENNAI - 600001 Region: 22 PO No. : RETAIL_PRIME
It is certified that the material described below fully conforms to IS 1079_2017. Chemical composition and Mechanical properties of the product, as tested in accordance with the Scheme of
Testing & Inspection contained in the BIS certification marks Licence No. CM/L - 6176976 are as indicated below against each order No. Etc.
(PLEASE REFER TO IS 1079_2017 FOR DETAILS OF SPECIFICATION REQUIREMENTS)
TEST RESULTS
Specification: IS1079_2017 HR2 QTY C% Mn % S% P% Si % Al % N% YS UTS GL (mm) EL% Bend

(MT) (Mpa) (MPa) Result

Heat No. Coil No. Nominal Size (MM) Min 0.020 80 25.00

Mother Coil T X W X L Max 0.1000 0.45 0.035 0.040 0.0120 420

A496579 2865540000 2.000 X 1245.0 X Coil 22.370 0.0630 0.30 0.010 0.012 0.013 0.050 0.0031 266 368 80 34.00 Pass

2865540000

Total Weight in Metric Tonnes 22.370 Grand Total of Coils/Pkt/Bundles/Slab 1

This is to certify that the above mentioned product produced & supplied by JSW Steel Limited do not contain any radio active element higher than
the natural level and it confirms to Standard Rolling, Dimensional & Weight tolerences. The product or packing material does not contain any
hazardous substances as per RoHS norms.

Delivery ID : 712056114 Legends: Chemistry = Laddle Sample analysis; 1Mpa= 1N/mm2 ; T x W x L = Thickness x Width x Length
YS= Yield Strength ; UTS = Ultimate Tensile Strength, %EL= %ge Elongation on standard gauge length
Invoice No. : 7104755910

GST Invoice No : 22VJ2900225265

Mode of Transport : Rail Authorised Signatory

Vehicle No. : For


LC No. : Remarks :

You might also like