PRODUCT TORPEDO SYNTHETIC LUXOL HI- GLOSS BUTTERFLY G.
P
NAME ENAMEL ENAMEL SYNTHETIC ENAMEL
COVERAGE 1 coat - 12- 16 Sq. Mtr./L 1 coat- 18- 24 Sq. Mtr./L 1 coat-12- 16 Sq. Mtr./L
DRYING TIME 6-8 hours 3-4 hours 3- 4 hours
STABILITY OF
24 hours 18 hours 18 hours
THINNED PAINT
APPEARANCE LIQUID LIQUID LIQUID
SHELF LIFE 2 YEARS 3-4 YEARS 3-4 years
THINNING 10- 20 % thinner 800
RATIO For conventional spray 10- 15% THINNER 800 5- 8% THINNER 800
SUITABLE FOR Tank exteriors, pipelines,
cladding, gantries etc. Metal, wall, wood. Metal, wood, wall
SERIES
Platinum series Platinum series Platinum series
FINISH
Glossy Mirror like gloss Full gloss
TOOLS
Brush, roller, spray Brush, roller, spray Brush, roller, spray
WASHABLE
NO YES YES
RECOMMENDE
D USES Interior and exterior Interior and exterior Interior and exterior
COST
Rs. 400/L Rs. 370L Rs. 550L
SHADE RANGE
As per shade card As per shade card As per shade card
AVAILABLE ( over 2000 shades) (22 shades)
PACK IN
1L, 5L, 10L, 20L 500ml, 1L, 4L, 9L, 10L, 500ml, 1L, 10L, 20L
APPLICATIONS 20L.
Brush/Roller: Apply Apply 2 coats Apply 2 coats
without thinning. appropriate primer giving appropriate primer
overnight interval giving overnight drying
Conventional Spray: Add between the coats. Sand interval between the
maximum upto 10-20% it again with Water Paper coats. Sand it again
Thinner 800. with Water Paper
Airless Spray: Add upto
SURFACE 5% Thinner 800 if
PREPARATION required.
Initially sand the surface Initially sand the
Remove grease, oil and with coarse sand/water surface with coarse
other contaminants paper according to the sand/water paper
preferably by using type of surfaces to according to the type of
Bison Degreasing remove rust, dust and surfaces to remove
Solvent. Thoroughly dust other loose/unwanted rust, dust and other
down all surfaces. The particles. Wipe the surface loose,unwanted
surface should be clean clean. Apply one coat particles. Wipe the
and dry before surface clean. Apply 1
primer after proper
application of a suitable coat primer after proper
thinning and allow the
primer coat. thinning and allow the
paint to dry fully. Sand the paint to dry fully. Sand
surface again with less the surface again with
coarser sand/water paper less coarser
lightly and wipe clean. Sand/Water Paper
PRECAUTIONS lightly and wipe clean.
Flammable Flammable
Do not apply when
temperature falls below
10° C or rises above 50° C
and when relative
humidity rises above 90%
or during rain, fog or mist.