WackerNeuson RD7 en
Uploaded by
hilal ahmadWackerNeuson RD7 en
Uploaded by
hilal ahmadRD7
Walk-behind Rollers
Achieving the perfect work results with ease
The hand-guided double-drum vibratory roller, RD7, supplies excellent Easy turning as a result of the long drawbar
performance in both soil and asphalt compaction - thanks to the Tight side clearance and more curb freedom for clean
optimally integrated frequency and two vibration stages. As a result, working on edges, supported by two scraper bars per drum
the roller is characterized by its ergonomically arranged operator for a cleaner asphalt surface
controls, such as, the engine rpm adjuster attached to the drawbar.
Automatic hydraulic parking brake increases safety,
Even the easy, tool-free access to all service points makes the RD7 a
especially when on a slope
simple and economical solution for every construction site.
Quickly get ready for transport due to the large tie-down
points on all sides and a drawbar locking mechanism
automatically operable by foot pedal
Hand-arm vibrations of less than 2.5 m/s² for more working
comfort
wackerneuson.com – compiled on 27.02.2022 Page 1
RD7 Technical specifications
RD7Y RD7H RD7A
Operating data
Operating weight min. kg 697 717 687
Operating weight max. kg 710 735 690
L x W x H Drawbar in working position mm 2,467 x 2,467 x 1,200 2,467 x 720 x 1,200 2,467 x 720 x 1,200
L x W x H Drawbar in the transport position mm 1,351 x 720 x 1,990 1,351 x 720 x 1,990 1,351 x 720 x 1,990
Drum width mm 650 650 650
Drum diameter mm 400 400 400
Lateral Overhang Right mm 30 30 30
Lateral Overhang Left mm 30 30 30
Curb clearance Right mm 22.5 22.5 22.5
Curb clearance Left mm 22.5 22.5 22.5
Centrifugal force max. kN 22.5 22.5 22.5
Frequency Stage I Hz 46 46 46
Frequency Stage II Hz 56 56 56
Linear force - front / rear Static N/mm 5.3 / 5.3 5.3 / 5.3 5.3 / 5.3
Linear force - front / rear Dynamic N/mm 17.3 / 17.3 17.3 / 17.3 17.3 / 17.3
Travel speed Forward km/h 4.5 4.5 4.5
Travel speed Reverse km/h 2.5 2.5 2.5
Surface capacity m²/h 2,895 2,895 2,895
Gradeability % 33 33 33
Hand-arm vibrations m/s² < 2.5 < 2.5 < 2.5
Engine / Motor
Engine / Motor type Air-cooled, one-cylinder, Air-cooled, one-cylinder, Air-cooled, one-cylinder,
four-stroke diesel engine four-stroke diesel engine four-cycle gasoline engine
Engine / Motor manufacturer Yanmar Hatz Honda
Engine / Motor manufacturer - Available variants Yanmar, Hatz, Honda Yanmar, Hatz, Honda Yanmar, Hatz, Honda
Displacement cm³ 445 445 389
Operating performance kW 6 6.1 5.6
at rpm rpm 2,600 2,600 2,600
Engine performance kW 6.8 7.5 8.7
at rpm rpm 3,600 3,600 3,600
CO2 (NRSC) g/kWh 964 1,020.16 743
Filling capacities
Fuel tank capacity l 6.1 6.1 6.1
Water tank capacity l 60 60 60
wackerneuson.com – compiled on 27.02.2022 Page 2
Please note: that product availability can vary from country to country. It is possible that information / products may not be available in your country. More detailed information on
engine power can be found in the operator's manual; the stated power may vary due to specific operating conditions. Subject to alterations and errors excepted. Applicable also to
illustrations.
Copyright © 2022 Wacker Neuson SE.