DATA SHEET SWING CHECK VALVE 2" AND LARGER

No. Dok. : ESDM-JRG-DS-B002 Revisi : 0 Tahun 2019

1 Size Inch ≥ 2
2 Quantity (Note 8)
GENERAL 3 Tag No. (Note 8)
4 Fluid type Hydrocarbon (Natural gas)
5 P&ID drawing No. (Note 8)
6 Service Above ground Under ground Under ground (inside valve box)
7 Operating pressure (Note 8) Barg Min. Max.
8 Design temperature (Note 8) deg C
SERVICE 9 Design flow (Note 8) MMscfd
CONDITION 10 Design pressure (Note 8) Barg
11 Valve pressure class (Note 8) #150 #300 #600 ………… (Note 8)
12 Gas specific gravity (Note 8)
13 Gas composition (Note 8)
14 Design code (Note 6) API Spec. 6D
15 Face to face dimension (Note 6) API Spec. 6D
16 Manufacturer (Note 2)
17 Type Swing
SPECIFICATION 18 Body/bonnet design One piece
19 Trim design
Disc Metal to metal
Seat Replaceable seat
20 End connection Raised face as per ASME B16.5
21 Body ASTM A216 WCB or equivalent
22 Cover ASTM A216 WCB or equivalent
23 Disc 13% Cr + face hardening
MATERIAL 24 Disc seating surface 13% Cr + face hardening
25 Body seat ring 13% Cr + face hardening
26 Spring Inconel X750
27 External finish (Note 3)
28 Testing and inspection code (Note 7) API Spec. 6D
29 Inspection certificate (Note 1) BS EN 10204 yype: 3.1 3.2
30 Pressure test
TESTING AND Pressure (Note 1) as per standard, otherwise stated at the time procurement will be placed
INSPECTION Duration (Note 1) as per standard, otherwise stated at the time procurement will be placed
31 Visual examination API 6D and MSS SP 55
32 Non destructive examination (Note 7) ASME Section V and MSS SP-53
33 Fire safe test If any, as per respective design code

Notes :
1 Refer to Scope of Work, Bid Documents, or Attachment specified by Owner.
2 Vendor to complete.
3 Refer to Standar Teknis Material Painting. For underground and inside valve pit application, valve shall be coated with powercrete R95 or equal.
4 Specification of valve shall also refer to Standar Teknis Material Spesifikasi Check Valve.
5 Seat and seal material shall be compatible with fluid services, pressure rating, and operating temperature limits for valves.
6 API 594 or ASME B16.34 allowed with prior notice and approval from Owner. API 594 and ASME B16.34 Check Valve face to face dimension shall be accordance with it's
respective.
7 For API 594, check valve testing and inspection code shall be in accordance with API 598.
8 Refer to Document Basic Design Proses, P&ID Jaringan Gas Bumi untuk Rumah Tangga, P&ID MRS/MS, P&ID RS, Material Take Off dan Bill of Quantity, and Line List
 DATA SHEET DUAL PLATE CHECK VALVE 2" AND LARGER
No. Dok. : ESDM-JRG-DS-B002 Revisi : 0 Tahun 2019
1 Size Inch ≥ 2
2 Quantity (Note 8)
GENERAL 3 Tag No. (Note 8)
4 Fluid type Hydrocarbon (Natural gas)
5 P&ID drawing No. (Note 8)
6 Service Above ground Under ground Under ground (inside valve box)
7 Operating pressure (Note 8) Barg Min. Max.
8 Design temperature (Note 8) deg C
SERVICE 9 Design flow (Note 8) MMscfd
CONDITION 10 Design pressure (Note 8) Barg
11 Valve pressure class (Note 8) #150 #300 #600 ……….. (Note 8)
12 Gas specific gravity (Note 8)
13 Gas composition (Note 8)
14 Design code (Note 6) API Spec. 6D
15 Face to face dimension (Note 6) API Spec. 6D
16 Manufacturer (Note 2)
SPECIFICATION
17 Cover Non bolted
18 Disc type Dual plate
19 End connection Wafer End to Raised Face Flange as per ASME B16.5
20 Body ASTM A216 WCB or equivalent
21 Cover ASTM A216 WCB or equivalent
22 Disc 13% Cr + face hardening
23 Disc seating surface 13% Cr + face hardening
MATERIAL
24 Body seat ring 13% Cr + face hardening
25 "O" ring (Note 1)
26 Spring Inconel X750
27 External finish (Note 3)
28 Testing and inspection code (Note 7) API Spec. 6D
29 Inspection certificate (Note 1) BS EN 10204 Type: 3.1 3.2
30 Pressure test
TESTING AND Pressure (Note 1) as per standard, otherwise stated at the time procurement will be placed
INSPECTION Duration (Note 1) as per standard, otherwise stated at the time procurement will be placed
31 Visual examination API 598 and MSS SP 55
32 Non destructive examination (Note 7) ASME Section V and MSS SP-53
33 Fire safe test If any, as per respective design code

Notes :
1 Refer to Scope of Work, Bid Documents, or Attachment specified by Owner.
2 Vendor to complete.
3 Refer to Standar Teknis Material Painting. For underground and inside valve pit application, valve shall be coated with powercrete R95 or equal.
4 Specification of valve shall also refer to Standar Teknis Material Spesifikasi Check Valve.
5 Seat and seal material shall be compatible with fluid services, pressure rating, and operating temperature limits for valves.
6 API 594 or ASME B16.34 allowed with prior notice and approval from Owner. API 594 and ASME B16.34 Check Valve face to face dimension shall be accordance with it's
respective.
7 For API 594, check valve testing and inspection code shall be in accordance with API 598.
8 Refer to Document Basic Design Proses, P&ID Jaringan Gas Bumi untuk Rumah Tangga, P&ID MRS/MS, P&ID RS, Material Take Off dan Bill of Quantity, and Line List
 DATA SHEET PISTON CHECK VALVE 1/2" - 1-1/2"
No. Dok. : ESDM-JRG-DS-B002 Revisi : 0 Tahun 2019
1 Size Inch 1/2 - 1-1/2"
2 Quantity (Note 6)
GENERAL 3 Tag No. (Note 6)
4 Fluid type Hydrocarbon (Natural gas)
5 P&ID drawing No. (Note 6)
6 Service Above ground Under ground Under ground (inside valve box)
7 Operating pressure (Note 6) Barg Min. Max.
8 Design temperature (Note 6) deg C
SERVICE 9 Design flow (Note 6) MMscfd
CONDITION 10 Design pressure (Note 6) Barg
11 Valve pressure class (Note 6) #800 #1500 ……….. (Note 6)
12 Gas specific gravity (Note 6)
13 Gas composition (Note 6)
14 Design code MSS SP 118
15 Face to face dimension Manufacture standard
16 Manufacturer (Note 2)
17 Cover Check piston type standard bore
18 Disc type MSS SP 118
SPECIFICATION
19 Trim design
20 Disc Piston type with removable guides
21 Seat Replaceable seat
22 End connection Socket weld as per ASME B16.11
23 Stem seal design Replaceable seals
24 Body ASTM A105
25 Bonnet ASTM A105
26 Trim No. 8 as per MSS SP 118
27 Body gasket Manufacturer's standard
MATERIAL 28 Springs Inconel X 750
29 Bolts ASTM A193 Grade B7
30 Nuts ASTM A194 Grade 2H
31 Name plate SS 316
32 External finish (Note 3)
33 Testing and inspection code (Note 1) MSS SP 118
34 Inspection certificate BS EN 10204 type: 3.1 3.2
35 Pressure test
TESTING AND Pressure (Note 1) as per standard, otherwise stated at the time procurement will be placed
INSPECTION Duration (Note 1) as per standard, otherwise stated at the time procurement will be placed
36 Visual examination API 598 and MSS SP 55
37 Non destructive examination ASME Section V and MSS SP-53
38 Fire safe test API 6FA or API 607

Notes :
1 Refer to Scope of Work, Bid Documents, or Attachment specified by Owner.
2 Vendor to complete.
3 Refer to Standar Teknis Material Painting. For underground and inside valve pit application, valve shall be coated with powercrete R95 or equal.
4 Specification of valve shall also refer to Standar Teknis Material Spesifikasi Check Valve.
5 Seat and seal material shall be compatible with fluid services, pressure rating, and operating temperature limits for valves.
6 Refer to Document Basic Design Proses, P&ID Jaringan Gas Bumi untuk Rumah Tangga, P&ID MRS/MS, P&ID RS, Material Take Off dan Bill of Quantity, and Line List
 DATA SHEET NON SLAM CHECK VALVE 2" AND LARGER
No. Dok. : ESDM-JRG-DS-B002 Revisi : 0 Tahun 2019
1 Size ≥2 inch
2 Quantity (Note 6)
GENERAL 3 Tag No. (Note 6)
4 Fluid type Hydrocarbon (Natural gas)
5 P&ID drawing No. (Note 6)
6 Service Above ground Under ground Under ground (inside valve box)
7 Operating pressure (Note 6) Barg Min. Max.
8 Design temperature (Note 6) deg C
SERVICE 9 Design flow (Note 6) MMscfd
CONDITION 10 Design pressure (Note 6) Barg
11 Valve pressure class (Note 6) #150 #300 #600 ………… (Note 6)
12 Gas specific gravity (Note 6)
13 Gas composition (Note 6)
14 Design code ASME B16.34 API Spec. 6D
15 Face to face dimension Manufacturer's standard
16 Manufacturer (Note 2)
SPECIFICATION
17 Type Non slam check valve
18 Body/bonnet design One piece
19 End connection Raised face as per ASME B16.5
20 Body ASTM A216 WCB or equivalent
21 Cover ASTM A216 WCB or equivalent
22 Disc 13% Cr + face hardening
23 Disc seating surface 13% Cr + face hardening
MATERIAL 24 Body seat ring 13% Cr + face hardening
25 "O" ring Viton AED
26 Spring Inconel X750
27 Name plate SS 316
28 External finish (Note 3)
29 Testing and inspection code API 598, API Spec. 6D
30 Inspection certificate (Note 1) BS EN 10204 Type: 3.1 3.2
31 Pressure test
TESTING AND Pressure (Note 1) as per standard, otherwise stated at the time procurement will be placed
INSPECTION Duration (Note 1) as per standard, otherwise stated at the time procurement will be placed
32 Visual examination API 598 and MSS SP 55
33 Non destructive examination ASME Section V and MSS SP-53
34 Fire safe test API 6FA or API 607

Notes :
1 Refer to Scope of Work, Bid Documents, or Attachment specified by Owner.
2 Vendor to complete.
3 Refer to Standar Teknis Material Painting. For underground and inside valve pit application, valve shall be coated with powercrete R95 or equal.
4 Specification of valve shall also refer to Standar Teknis Material Spesifikasi Check Valve.
5 Seat and seal material shall be compatible with fluid services, pressure rating, and operating temperature limits for valves.
6 Refer to Document Basic Design Proses, P&ID Jaringan Gas Bumi untuk Rumah Tangga, P&ID MRS/MS, P&ID RS, Material Take Off dan Bill of Quantity, and Line List