Product Information

SAMSUNG
SAMSUNGTFT-LCD
TFT-LCD
MODEL
MODEL NO.
NO. :: LTN141P1-L01
LTN141P1-L01

SAMSUNG ELECTRONICS CO. LTD.

Doc.No. LTN141P1-L01 Rev.No 04-002-G-000325 Page 1 /6

GENERAL DESCRIPTION

DESCRIPTION
LTN141P1-L01 is a color active matrix TFT (Thin Film Transistor) liquid crystal
display (LCD) that uses amorphous silicon TFT as a switching devices. This
model is composed of a TFT LCD panel, a driver circuit and a backlight
system. The resolution of a 14.1" contains 1400 x 1050 pixels and can display
up to 262,144 colors. 6 O'clock direction is the Optimum viewing angle.

FEATURES
• Thin and light weight
• High contrast ratio
• SXGA-Plus((1400x1050) pixels) resolution
• Low power consumption
• DE (Data enable) only mode.

APPLICATIONS
• Notebook PC and desktop monitors
• Display terminals for AV application products
• Monitors for Industrial machine
• If the usage of this product is not for PC application, but for others, please
contact SEC

Doc.No. LTN141P1-L01 Rev.No 04-002-G-000325 Page 2 /6

 GENERAL INFORMATION

ITEM SPECIFICATION UNIT NOTE

Display area 285.6(H)X214.2(V) (14.1”diagonal) mm

Driver element a-Si TFT active matrix

Display colors 262,144

Number of pixel 1400 x 1050 pixel

Pixel arrangement RGB vertical stripe mm

Pixel pitch 0.204(H) x 0.204(V) (TYP.)

Display Mode Normally white

Surface treatment HAZE (25), HARD-COATING (3H)

Mechanical Information

ITEM MIN. TYP. MAX. NOTE

Horizontal (H) 298.0 298.5 299.0

Module
size Vertical (V) 226.0 226.5 227.0
(mm)
Depth (D) - 5.9 TBD

Weight - 540 TBD

Doc.No. LTN141P1-L01 Rev.No 04-002-G-000325 Page 3 /6

 INPUT Interface Connection

LVDS
Connector : UJ-FI-SEB-20P-HF13
Mating Connector : JAE FI-SE20M-HF

PIN NO SYMBOL FUNCTION POLARITY REMARK

1 VDD POWER SUPPLY +3.3V

2 VDD POWER SUPPLY +3.3V

3 GND GROUND

4 GND GROUND

5 O_RxIN0- LVDS Differential Data INPUT Negative Odd channel 0

6 O_RxIN0+ LVDS Differential Data INPUT Positive Odd channel 0

7 O_RxIN1- LVDS Differential Data INPUT Negative Odd channel 1

8 O_RxIN1+ LVDS Differential Data INPUT Positive Odd channel 1

9 O_RxIN2- LVDS Differential Data INPUT Negative Odd channel 2

10 O_RxIN2+ LVDS Differential Data INPUT Positive Odd channel 2

11 O_RxCLK- LVDS Differential Data INPUT Negative Odd Clock

12 O_RxCLK+ LVDS Differential Data INPUT Positive Odd Clock

13 E_RxIN0- LVDS Differential Data INPUT Negative Even channel 0

14 E_RxIN0+ LVDS Differential Data INPUT Positive Even channel 0

15 E_RxIN1- LVDS Differential Data INPUT Negative Even channel 1

16 E_RxIN1+ LVDS Differential Data INPUT Positive Even channel 1

17 E_RxIN2- LVDS Differential Data INPUT Negative Even channel 2

18 E_RxIN2+ LVDS Differential Data INPUT Positive Even channel 2

19 E_RxCLK- LVDS Differential Data INPUT Negative Even Clock

20 E_RxCLK+ LVDS Differential Data INPUT Positive Even Clock

Doc.No. LTN141P1-L01 Rev.No 04-002-G-000325 Page 4 /6

 BACK-LIGHT UNIT
The backlight system is an edge - lighting type with a single CCFT.

_ 2 oC
Ta = 25 +

ITEM SYMBOL MIN. MAX. UNIT NOTE

Lamp Current IL 3.0 6.0 mArms (1)

Lamp frequency FL 40 680 kHz (1)

Note 1) Permanent damage to the device may occur if maximum values are exceeded
Functional operation should be restricted to the conditions described under normal operating condition

HOT : (BLUE)

1
LCD
INVERTER
MODULE 2 A
COLD : (WHITE)
SEM SIC-130T
Switching Frequency : 40 ~ 60KHz

Connector : JST BHSR - 02VS -1

Mating Connector : SM02B-BHSS-1(JST)

BACKLIGHT CONNECTOR PIN CONFIGURATION

Pin NO. Symbol Color Function

1 HOT Blue High Voltage

2 COLD White Low Voltage

Doc.No. LTN141P1-L01 Rev.No 04-002-G-000325 Page 5 /6