Scribd
Upload
118 views3 pages

3 Com

The document discusses why a saved configuration file cannot be loaded onto HP Switch 5500 devices. It explains that once the "Skip current configuration file" bootrom option is enabled, the switch will ignore any saved configuration files and load the factory default configuration instead upon reboot. The option must be disabled in the bootrom for the switch to start loading the saved configuration file again.

Uploaded by

juut kluwut
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
118 views3 pages

3 Com

The document discusses why a saved configuration file cannot be loaded onto HP Switch 5500 devices. It explains that once the "Skip current configuration file" bootrom option is enabled, the switch will ignore any saved configuration files and load the factory default configuration instead upon reboot. The option must be disabled in the bootrom for the switch to start loading the saved configuration file again.

Uploaded by

juut kluwut
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

HP Switch 5500 - Why a saved configuration file can not be loaded

3Com Knowledgebase Article

Title:

HP Switch 5500 - Why a saved configuration file can not be loaded

Product:

3CR17161-91 - 3Com Switch 5500-EI 28-Port

3CR17162-91 - 3Com Switch 5500-EI 52-Port

3CR17171-91 - 3Com Switch 5500-EI PWR 28-Port

3CR17172-91 - 3Com Switch 5500-EI PWR 52-Port

3CR17181-91 - 3Com Switch 5500-EI 28-Port FX

3CR17250-91 - 3Com Switch 5500G-EI 24-port

3CR17251-91 - 3Com Switch 5500G-EI 48-port

3CR17252-91 - 3Com Switch 5500G-EI PWR 24-port

3CR17253-91 - 3Com Switch 5500G-EI PWR 48-port

3CR17254-91 - 3Com Switch 5500G-EI 24-port Chassis

3CR17258-91 - 3Com Switch 5500G-EI 24-port SFP

Fix:

BOOT MENU 1. Download application file to flash

2. Select application file to boot

3. Display all files in flash

4. Delete file from flash

5. Modify bootrom password

6. Enter bootrom upgrade menu

7. Skip current configuration file

8. Set bootrom password recovery

9. Set switch startup mode

0. Reboot

Enter your choice(0-9): 7

The current setting is skipping configuration file when reboot.

Are you sure you want to skip current configuration file when reboot? Yes or No(
Y/N) y

The above action will disable loading of saved configuration file from flash,
switch will always reboot into factory setting.

BOOT MENU

1. Download application file to flash

2. Select application file to boot

3. Display all files in flash

4. Delete file from flash

5. Modify bootrom password

6. Enter bootrom upgrade menu

7. Skip current configuration file

8. Set bootrom password recovery

9. Set switch startup mode

0. Reboot

Enter your choice(0-9): 7

The current setting is skipping configuration file when reboot.

Are you sure you want to skip current configuration file when reboot? Yes or No
(Y/N) n

Setting......done!

This action will bring the boot load back to normal -- load saved configuration
file at next reboot.

Disable "Skip current configuration file"

Symptom:

Switch 5500 - Why a saved configuration file can not be loaded

Configuration can be modified after rebooting and saved - however the switch will
not load saved configuration file upon next reboot

Cause:

Once "Skip current configuration file" option is enabled, the switch will ignore
any configuration file saved in the flash memory, and factory default configuration
file instead, until the next time the bootrom is accessed and "Skip current
configuration file" disabled.

Fact:

Bootrom option 7 "Skip current configuration file" enabled


"Configuration file is not used" displayed during bootup process

setting ip untuk web akses


su
sys
int vlan 1
ip address 192.168.1.1 255.255.255.0
ip route-static 0.0.0.0 0.0.0.0 192.168.1.2
qui
save
reboot

local-user admin
attribute access-limit 1
level 3
service-type telnet level 3
service-type lan-access
qui
qui
save

You might also like