OLOA®® 58000
OLOA 59766
Additive Package for Gasoline and Diesel Engine Oils
Application, Product Summary & Benefits
®
OLOA 58000 is a treat optimized package designed for top ends API licensed categories.
® ®
As a single DI, OLOA 58000 was developed with PARATONE NDOCP technology and GpI base stocks to
achieve the latest licensable API categories (from API SJ/CF through API SL/CF) in 10W-30, 15W-40 and 20W-50
viscosity grades.
® ®
In combination with OLOA 58823, OLOA 58000 is licensed against the highest tier API SM and API SN category
in appropriate V.I.I and base stocks system.
API LEVEL OLOA 58000 %wt OLOA 58823 %wt
API SN/SM/CF 6.5 2.05
ACEA A2/B2* 7.8
API SL/CF-4* 7.03 -
API SL/CF 6.5 -
API SJ/CF 5.8 -
Mono Multi BN
API levels
% mass % mass
SG/CF 5.22 5.22 6
SF/CF 5.19 5.19 6
SF/CD
4.26 4.58 4.9/5.2
SF/CC
SE/CD 4.16 4.58 4.8/5.2
SE/CC 3.43 3.77 3.9/4.3
SC/CC 3.18 3.5 3.6/4
SC/CB
1.98 2.18 2.3/2.5
SB/CB
Note : Other down treat rate apply for lower performances level
The data presented in this bulletin are believed to be accurate; however, Chevron Oronite Company LLC shall not be liable for its content and
make no warranty with respect thereto.
For additional information contact the regional office: North & South America and Canada 713-432-2500 , Asia Pacific (65) 6867-6557; Europe,
Africa & Middle East (33) 1 46 39 36 30 or go to www.oronite.com
© 2016 Chevron Oronite Company LLC. All rights reserved. Chevron, the Chevron hallmark, Oronite, OLOA, PARATONE and Adding up are
registered trademarks of Chevron Intellectual Property LLC
Version – August 24, 2016
OLOA®® 58000
OLOA 59766
Recommended Dosage 6.5% mass% for API SL/CF and 5.8 mass% for API SJ/CF
.
From 1.98% to 5.22% for API obsolete claims
VI Improver (VII) PARATONE® Non-Dispersant OCP
Typical Properties
Chemical
Calcium, mass/wt% ASTM D 4951/D 4927 4.21
Phosphorus, mass/wt% ASTM D 4951 1.18
Zinc, mass/wt% ASTM D 4951 1.28
Nitrogen, mass/wt% ASTM D 5291 0.45
Sulfated Ash, mass/wt% ASTM D 874 16
Base Number, mg KOH/g ASTM D 2896 114
Molybdenum, ppm (ASTM D5185) 1400
Physical
Specific Gravity, at 15°C ASTM D 4052 1.009
Viscosity, mm²/s (cSt) at 40°C ASTM D 445 2214
Viscosity, mm²/s (cSt) at 100°C ASTM D 445 112
Handling
Please refer to the corresponding material safety data sheet for handling and blending precautions and maximum
recommended temperatures.
The data presented in this bulletin are believed to be accurate; however, Chevron Oronite Company LLC shall not be liable for its content and
make no warranty with respect thereto.
For additional information contact the regional office: North & South America and Canada 713-432-2500 , Asia Pacific (65) 6867-6557; Europe,
Africa & Middle East (33) 1 46 39 36 30 or go to www.oronite.com
© 2016 Chevron Oronite Company LLC. All rights reserved. Chevron, the Chevron hallmark, Oronite, OLOA, PARATONE and Adding up are
registered trademarks of Chevron Intellectual Property LLC
Version – August 24, 2016
