ICP Tool Revision History

ICP (In-Chip Programming) Tool

Revision History

ICP Tool Revision History

The information described in this document is the exclusive intellectual property of
Nuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton.

Nuvoton is providing this document only for reference purposes of NuMicro® microcontroller based system
design. Nuvoton assumes no responsibility for errors or omissions.
All data and specifications are subject to change without notice.

For additional information or questions, please contact: Nuvoton Technology Corporation.

Dec 4, 2020 Page 1 of 15 Rev. 3.05

 ICP Tool Revision History

TABLE OF CONTENTS
1 Revision History ..................................................................................................... 3
2 supported Debugger and Programmer .................................................................... 8
3 Supported Mass Production Programmer ............................................................... 9
4 Supported Microcontroller ................................................................................... 10
5 Resources ............................................................................................................ 15
ICP Tool Revision History

Dec 4, 2020 Page 2 of 15 Rev. 3.05

 ICP Tool Revision History

1 Revision History

Version Release Date Description

 Added supported microcontroller:

3.05 2020/12/4
– NuMicro 8051 Family: MS51EB0AE.

 Added supported microcontroller:

3.04 2020/9/24 – NuMicro M0 Family: M031TE3AE.
– NuMicro M23 Family: M2351SFSIAAP.

 Added supported microcontroller:

– NuMicro M0 Family:NUC131LC2AEU, NUC131SC2AEU,
NUC131LD2AEU, NUC131SD2AEU, NUC029MDE, M030FD2AE,
NM18307Y, M071 series, M030G series, M0A21 series, M0515,
NM1240 and N569J series.
– NuMicro M23 Family: NDA102SD, M258, M2354 series.
3.03 2020/7/17 – NuMicro M4 Family: M487KMCAN, M471 series.
– NuMicro 8051 Family: ML56 series.
 Added multiple data storage option of Nu-Link2-Pro, allowing users to
download the programming data in SD Card and USB flash drive to
run offline programming. (include M2351, M261, and NUC505 series)
 Supported target chip auto detection.
 Nu-Link-Gang bin: Support M471 / Version No. v2.2.

 Added two-stage programming function of all NuMicro ICs except

M2351, M261, 8051(1T) and NUC505 series.
– In the first stage, users can download the programming data
from PC to programmer while connecting to the target chip is
not necessary.

ICP Tool Revision History

– In the seconed stage, users can connect the target chip with this
programmer to run offline programming.
 Added multiple data storage option of Nu-Link2-Pro, allowing users to
3.02 2020/2/1 download the programming data in SD Card and USB flash drive to run
offline programming. (except M2351, M261, and NUC505 series)
 Added supported microcontroller:
– NuMicro M4 Family: M48x8AE, M48xCAE, M479 series and
M487KMCAN.
– NuMicro M0 Family: M031BTYE3AN, M030TD2AE, M030LD2AE,
M031BTYD2AN, M058MDE, NM18202S, NM1232D,
NM1220EBK0, NM1232Y.

 Supported NUC1311, M032C/D for NuMicro M0 series.

 Supported MR63 for NuMicro M23 series.
3.01 2019/9/30
 Add "Erase Whole Chip" option for user setting of online/offline
programming (excluding 80511T M2351 and M261).

 Added TF5100/ M031 (256/512 KB) for Cortex M0 series.

3.00 2019/5/3  Added M261 for Cortex M23 series.
 Added three help function (open user manual, version check, open

Dec 4, 2020 Page 3 of 15 Rev. 3.05

 ICP Tool Revision History

NuMergeFile tool).
 Supported Nu-Link2 ICE adapter.

 Supported M480LD for NuMicro M4 series.

 Supported NM1230 for Motor MCU.
2.06 2019/02/26
 Supported ML51/MS51 for NuMicro 8051 series.
 Nu-Link2 debug probe supported mass storage programmer mode.

 Cortex-M
– Supported Nu-Link2.
– Supported NUC029DE/EE/GE, NUC2201, NUC1261, NDA102,
2.05 2018/09/06 M031, NM1230 for NuMicro M0 series.
– Supported M4521 for NuMicro M4 series.
 C51
– Supported Nu-Link2.

 Improved download performance around 10~20% of both online and

offline modes.
2.04.6725 2018/04/03  Enabled secure boot option for M480 series.
 Supported auto-programming option of 8051 1T offline mode. (target
board can't be self-powered in this case).

2.03.6674 2017/12/11  Supported M2351 for NuMicro M23 series.

 Supported Mini57 for NuMicro M0 series.

2.02.6629 2017/06/23  Supported M480 for NuMicro M4 series.
 Supported I94000 for NuVoice series.

 Supported NUC121, NUC125, NUC126, M0564, NM1810 and I91200

2.01.6592 2017/01/13 series.
ICP Tool Revision History

 Supported 8051 1T series (N76E885, N76E884, N76E616, N76E003,

N76E002).
 Added “checksum verify” function for M451 series.
2.00.6561 2016/07/22
 In offline mode, added SN (serial number) function for NUC505 series.
 Use “page erase” instead of “chip erase” if only partial flash segments
are programmed, user can preserve configuration page in that case.

 Supported Nano103, NM1120, NM1330, NM1820 for NuMicro M0

series.
 Supported M4TK for NuMicro M4 series.
 Supported N575, N576 and N570 for NuVoice series.
1.31.6535 2016/02/01
 Programming APROM with given offset (must be page alignment).
 Fixed NUC505 crash issue when exporting binary file.
 In offline mode, fixed the problem that sometimes total count can't
reach maximum value.

 Added “NuMergeFile.exe” under the installation folder for binary files

1.30.6491 2015/07/21 merging.

Dec 4, 2020 Page 4 of 15 Rev. 3.05

 ICP Tool Revision History

 Supported APROM programming at specific address.

 NUC505: Supported to re-program MTP while MTP key status is
invalid.
 NUC230/240AE: Supported 8 KB LDROM (4 KB in previous version)
 Mini58: Supported SPROM programming.
 Mini58: Supported 2.5 KB LDROM (2 KB in previous version).
 Mini58: Fixed chip erase function in security lock mode.
 Modified the Data Flash configuration method.
 Displayed user defined part number (from UCID) for NUC100 series.
 Supported Mini55LDE and Mini55ZDE for NuMicro M0 series.
 NUC100, M051: Supported to keep previous Config0[10] value after
whole chip erase.
 Renamed NUC123BE to NUC123AE.
 NUC505: Changed offline download mode from ICP to SWD.

 Improved user interface to be resizable and scrollable.

 Disabled Watchdog while programming target Flash to avoid failure
caused by Watchdog reset.
 Supported not to automatically read Flash after configuration page
update and first connection to avoid reading large amounts of data.
1.29.6425 2015/03/27  Replaced ICE clock 16 MHz with 12 MHz for compatibility issue.
 Added part number: NUC220LE3AE.
 Supported M0519, NM1320 and Mini58 for NuMicro M0 series.
 Provided an option to install Bulk USB driver when Nu-Link driver
installation completed.

 Supported USB Bulk mode which can improve downloading and

programming speed on Win7.


ICP Tool Revision History

Added part number: NUC120LD2DE.
1.28.6386 2015/01/14  Supported NUC505 internal/external SPI flash option.
 Supported NUC029 for NuMicro M0 series.
 Fixed Configure Setting dialog GUI for Nano102/112 series.

 Supported NUC505 for NuMicro M4 series.

 Supported ISD9100 and ISD9300 for ARM based Audio series.
 Supported N571 and N572 for NuVoice series.
1.27.6340 2014/9/29  Added part numbers: M4LEDRG6AE, M4LEDRE6AE, M4LEDLG6AE,
M4LEDLE6AE.
 Added part number: NUC100VE3DE.
 Updated Chapter 5, 6, and 8 in the ICP Programming Tool User
Manual.

 Supported M0518 for NuMicro M0 series.

1.26.6314 2014/07/21
 Added M452 and M453 part number for M451 series.

1.25.6287 2014/05/22  Supported NUC131 for NuMicro M0 series.

Dec 4, 2020 Page 5 of 15 Rev. 3.05

 ICP Tool Revision History

 Supported M451 for NuMicro M4 series.

 Supported ISD9300 for ISD series.
 Supported one computer can be connected to 10 Nu-Link devices
simultaneously.
 Renamed the part number MT530 to NM1530.

1.24.6211 2014/01/16  Supported Nano112AN and M058SFAN for NuMicro M0 series.

 Supported M051DN, M051DE, Mini51DE, NUC100EN, NUC200AE,

MT500BE for NuMicro M0 series.
1.23.6103 2013/10/25  Supported NUC442/472 for NuMicro M4 series.
 Supported [Nu-Link-MP] to beep three times when being downloaded
successfully and display the part number on LCD.

 Supported NUC103 BN, M05x DN and AU9100 series.

 Added the new parts: NANO120ZD2AN, NANO120SD3AN and
NANO120ZC2AN.
 Created new config dialogs for NUC102, M058S and NANO100 BN.
1.22.6040 2013/07/09  Provided re-connect function after writing config0/1, except batch
mode.
 Enabled config setting menu options when chip is not connected.
 Supported specific flash programming (LDROM, APROM, DataFlash
and configuration area) in Offline mode.

1.21.5905 2012/12/27  Updated rules of automatically version check mechanism.

 Fixed the import function bug.

 Modified the part number information to NUC100 DN series.
 Disabled the Nu-Link-Pro IO Voltage (2.5V and 5.0V) settings in
1.20.5881 2012/12/19 NanoNANO100 BN series.
 Added MiniMINI51 BN series config settings dialog.
ICP Tool Revision History

 Modified the flash address of NanoNANO100 BN series.

 Supported NUC100 DN, NUC123, NUC200, NANO100 BN, MT500,

MINI51 BN and M051 CN series.
1.19.5786 2012/10/24  Integrated some message boxes to reduce operation flow.
 Updated the MINI51 config0 dialog.

 Supported to show ID, UID and UCID.

1.18.5320 2011/11/17  Supported to erase M051 series when it is locked.
 Supported to export an all-in-one project with or without encryption.

 Supported NANO100 and MINI51 series.

 Fixed image errors in traditional Chinese.
 Supported to show RAM size of target chip.
1.17.5218 2011/08/11
 Updated to not to show firmware update dialog if Nu-Link firmware is
compatible.
 Supported to select multiple Nu-Links.

Dec 4, 2020 Page 6 of 15 Rev. 3.05

 ICP Tool Revision History

 Supported auto-frequency on SWD (512K~4 MHz)

 Improved security of offline download:
– Forbid reading SPI data without correct password.
– Write configuration area before other data for safety in offline
downloading.
– Encoding downloading data on SWD in offline mode.
– Force unlocked Nu-Link to update configuration of its own.
– Encrypt SPI data by data flash
– Use password exchange algorithm to enhance security.
 Supported Auto-program mode for offline download.
 Supported statistics of offline download.
 Supported to limit the count of programming for offline download.
 Supported to write serial number.
 Fixed a bug to change I/O voltage immediately after setting options.

 Supported NUC122, M051 BN and NUC100 CN series.

 Supported to adjust target power by Nu-Link pro.
 Fixed a bug that the hex viewer didn’t show updated data.
 Fixed a bug to support random byte write when writing size/4 is not
1.05.5008 2011/05/04 equal to 0.
 Changed "external 12 MHz crystal clock" to “4-24 MHz”.
 Supported LED indication for USB/Target power.
 Added settings for target power and I/O voltage.

 Supported NUC122 series.

 Fixed a bug to avoid crash problem when network is
disconnected.

ICP Tool Revision History

 Supported offline download mode via data flash.
 Added compare function with file data.
 Supported to dump error information.
 Fixed a bug to drive target chip to run when connected.
1.03.4228 2010/12/08
 Added reset and run program in target chip after programming.
 Renamed "ICP Tool" to "NuMicro ICP Programming Tool".
 Fixed a bug to update locked chip in offline mode.
 Supported to check update from network.
 Supported SPI flash.
 Removed some message boxes in batch program mode.
 Supported ICP project file.

1.02.3814 2010/04/20  Release primary version.

Dec 4, 2020 Page 7 of 15 Rev. 3.05

 ICP Tool Revision History

2 Supported Debugger and Programmer

Debugger and Programmer Device Type Supported Product

Nu-Link2-Pro Stand-alone NuMicro 8051 (1T) / M0 / M23 / M4 Family

Nu-Link-Pro Stand-alone NuMicro 8051 (1T) / M0 / M23 / M4 Family

Nu-Link Stand-alone NuMicro 8051 (1T) / M0 / M23 / M4 Family

Nu-Link2-Me Attached to NuMicro EVB NuMicro 8051 (1T) / M0 / M23 / M4 Family

Nu-Link-Me Attached to NuMicro EVB NuMicro 8051 (1T) / M0 / M23 / M4 Family

ICP Tool Revision History

Dec 4, 2020 Page 8 of 15 Rev. 3.05

 ICP Tool Revision History

3 Supported Mass Production Programmer

Mass Production Programmer Device Type Supported Product

Nu-Link-Gang Stand-alone NuMicro 8051 (1T) / M0 / M23 / M4 Family

ICP Tool Revision History

Dec 4, 2020 Page 9 of 15 Rev. 3.05

 ICP Tool Revision History

4 Supported Microcontroller

Product Line Series Part Number

MS51BA9AE, MS51DA9AE, MS51XB9AE, MS51XB9BE, MS51FB9AE, MS51FC0AE,

MS51
MS51XC0BE, MS51EC0AE, MS51TC0AE, MS51PC0AE, MS51EB0AE

ML51BB9AE, ML51DB9AE, ML51FB9AE, ML51OB9AE, ML51XB9AE, ML51EB9AE,

ML51UB9AE, ML51PB9AE, ML51TB9AE, ML51EC0AE, ML51UC0AE, ML51PC0AE,
ML51
NuMicro® ML51TC0AE, ML51TD1AE, ML51LD1AE, ML51SD1AE, ML54MD1AE, ML54LD1AE,
8051 Family ML54SD1AE, ML56MD1AE, ML56LD1AE, ML56SD1AE

N76E003 N76E003AT20, N76E003AS20, N76E003AQ20, N76E003BQ20, N76E003CQ20

N76E616 N76E616AL48, N76E616AF44, N76E616AM44

N76E885 N76E885AT28, N76E885AT20, N76E885AQ20, N76E885AS28

MINI51LAN, MINI51ZAN, MINI51TAN, MINI52LAN, MINI52ZAN, MINI52TAN,

MINI54LAN, MINI54ZAN, MINI54TAN, MINI51LDE, MINI51QDE, MINI51ZDE,
Mini51 MINI51TDE, MINI51FDE, MINI52LDE, MINI52QDE, MINI52ZDE, MINI52TDE,
MINI52FDE, MINI54LDE, MINI54QDE, MINI54ZDE, MINI54TDE, MINI54FDE,
MINI54FHC

Mini55 MINI55LDE, MINI55ZDE, MINI55TDE

Mini57 MINI57EDE, MINI57FDE, MINI57XDE, MINI57TDE

Mini58 MINI58FDE, MINI58LDE, MINI58QDE, MINI58TDE, MINI58ZDE

M030GGD1AE, M030GTD1AE, M030GGC1AE, M030GTC1AE M030GGC0AE,

M030G
M030GTC0AE

M030 M030TD2AE, M030LD2AE, M030FD2AE

M031BTYD2AN, M031BTYE3AN, M031BTY, M031LE3AE, M031SE3AE, M031TE3AE,

ICP Tool Revision History

NuMicro® M031TD2AE, M031LD2AE, M031LC2AE, M031SD2AE, M031SC2AE, M031FC1AE,

M0 Family M031 M031EC1AE, M031TC1AE, M031FB0AE, M031EB0AE, M031TB0AE, M031SIAAE,
M031KIAAE, M031LG8AE, M031SG8AE, M031KG8AE, M031LG6AE, M031SG6AE,
M031KG6AE

M032LE3AE, M032SE3AE, M032SIAAE, M032KIAAE, M032LG8AE, M032SG8AE,

M032 M032KG8AE, M032LG6AE, M032SG6AE, M032KG6AE, M032TD2AE, M032LD2AE,
M032LC2AE, M032FC1AE, M032EC1AE, M032TC1AE

M052LAN, M052ZAN, M054LAN, M054ZAN, M058LAN, M058ZAN, M0516LAN,

M0516ZAN, M052LBN, M052ZBN, M054LBN, M054ZBN, M058LBN, M058ZBN,
M051 M0516LBN, M0516ZBN, M052LDN, M052ZDN, M054LDN, M054ZDN, M058LDN,
M058ZDN, M0516LDN, M0516ZDN, M052LDE, M052ZDE, M054LDE, M054ZDE,
M058LDE, M058ZDE, M058MDE, M0516LDE, M0516ZDE

M0515 M0515LDE

M0518 M0518LD2AE, M0518LC2AE, M0518SD2AE, M0518SC2AE

M0519 M0519LD3AE, M0519LE3AE, M0519SD3AE, M0519SE3AE, M0519VE3AE

Dec 4, 2020 Page 10 of 15 Rev. 3.05

 ICP Tool Revision History

M0564 M0564LE4AE, M0564LG4AE, M0564SE4AE, M0564SG4AE, M0564VG4AE

M058S M058SLAN, M058SZAN, M058SSAN, M058SFAN

M071MC2AE, M071MD2AE, M071R1D3AE, M071R1E3AE, M071SD3AE, M071SE3AE,

M071
M071QE4AE, M071QG4AE, M071VG4AE

M0A21OB1AC, M0A21OC1AC, M0A21EB1AC, M0A21EC1AC, M0A23OC1AC,

M0A21
M0A23EC1AC

NUC029NAN, NUC029LAN, NUC029TAN, NUC029CIG1, NUC029ZAN, NUC029TAE,

NUC029 NUC029FAE, NUC029LDE, NUC029SDE, NUC029MDE, NUC029LEE, NUC029SEE,
NUC029LGE, NUC029SGE, NUC029KGE

NUC100LE3AN, NUC100LD3AN, NUC100RE3AN, NUC100RD3AN, NUC100VE3AN,

NUC100VD3AN, NUC100VD2AN, NUC100LE3DN, NUC100LD3DN, NUC100LD2DN,
NUC100LD1DN, NUC100LC1DN, NUC100RE3DN, NUC100RD3DN, NUC100RD2DN,
NUC100RD1DN, NUC100RC1DN, NUC100VE3DN, NUC100VD3DN, NUC100VD2DN,
NUC100 NUC100VE3DE, NUC120LE3AN, NUC120LD3AN, NUC120RE3AN, NUC120RD3AN,
NUC120LE3AN, NUC120VE3AN, NUC120VD3AN, NUC120VD2AN, NUC120LE3DN,
NUC120LD3DN, NUC120LD2DN, NUC120LD1DN, NUC120LC1DN, NUC120VE3DN,
NUC120VD3DN, NUC120VD2DN, NUC120RE3DN, NUC120RD3DN, NUC120RD2DN,
NUC120RD1DN, NUC120RC1DN, NUC120LD2DE

NUC121 NUC121ZC2AE, NUC121LC2AE, NUC121SC2AE, NUC121WC2AE, NUC121Y25CN

NUC122LD2AN, NUC122LC1AN, NUC122SD2AN, NUC122SC1AN, NUC122ZD2AN,

NUC122 NUC122ZC1AN, NUC122ZD2DN, NUC122LD2DN, NUC122SD2DN, NUC122ZC1DN,
NUC122LC1DN, NUC122SC1DN

NUC123SC2AN1, NUC123SD4AN0, NUC123LC2AN1, NUC123LD4AN0,

NUC123 NUC123ZC2AN1, NUC123ZD4AN0, NUC123SC2AE1, NUC123SD4AE0,
NUC123LC2AE1, NUC123LD4AE0, NUC123ZC2AE1, NUC123ZD4AE0

NUC125 NUC125ZC2AE, NUC125LC2AE, NUC125SC2AE

ICP Tool Revision History

NUC126LE4AE, NUC126LG4AE, NUC126SE4AE, NUC126SG4AE, NUC126VG4AE,
NUC126
NUC126NE4AE

NUC1261 NUC1261LE4AE, NUC1261LG4AE, NUC1261SE4AE, NUC1261SG4AE

NUC130LE3CN, NUC130LD2CN, NUC130LC1CN, NUC130RE3CN, NUC130RD2CN,

NUC130
NUC130RC1CN, NUC130VE3CN

NUC131LD2AE, NUC131LC2AE, NUC131SD2AE, NUC131SC2AE, NUC131LD2AEU,

NUC131
NUC131LC2AEU, NUC131SD2AEU, NUC131SC2AEU

NUC1311 NUC1311LD2AE, NUC1311LC2AE

NUC140LE3CN, NUC140LD2CN, NUC140LC1CN, NUC140RE3CN, NUC140RD2CN,

NUC140
NUC140RC1CN, NUC140VE3CN

NUC200LE3AN, NUC200LD2AN, NUC200LC2AN, NUC200VE3AN, NUC200SE3AN,

NUC200 NUC200SD2AN, NUC200SC2AN, NUC220LE3AN, NUC220LD2AN, NUC220LC2AN,
NUC220VE3AN, NUC220SE3AN, NUC220SD2AN, NUC220SC2AN

NUC2201 NUC2201LE3AE, NUC2201SE3AE

Dec 4, 2020 Page 11 of 15 Rev. 3.05

 ICP Tool Revision History

NUC230LC2AE, NUC230LD2AE, NUC230LE3AE, NUC230SC2AE, NUC230SD2AE,

NUC230
NUC230SE3AE, NUC230VE3AE

NUC240LC2AE, NUC240LD2AE, NUC240LE3AE, NUC220LE3AE, NUC240SC2AE,

NUC240
NUC240SD2AE, NUC240SE3AE, NUC240VE3AE

Nano100ZD3AN, Nano100ZD2AN, Nano100VD3AN, Nano100VD2AN,

Nano100SD3AN, Nano100SD2AN, Nano100LD3AN, Nano100LD2AN,
Nano100ZC2AN, Nano100SC2AN, Nano100LC2AN, Nano100KE3BN, Nano100SE3BN,
Nano100
Nano100LE3BN, Nano100KD3BN, Nano100SD3BN, Nano100SD2BN, Nano100LD3BN,
Nano100LD2BN, Nano100SC2BN, Nano100LC2BN, Nano100NE3BN,
Nano100ND3BN, Nano100ND2BN, Nano100WE3BN

Nano102 Nano102ZB1AN, Nano102ZC2AN, Nano102LB1AN, Nano102LC2AN, Nano102SC2AN

Nano103 Nano103ZD3AE, Nano103LD3AE, Nano103SD3AE

Nano110KE3BN, Nano110SE3BN, Nano110KD3BN, Nano110KD2BN, Nano110SD3BN,

Nano110 Nano110SD2BN, Nano110KC2BN, Nano110SC2BN, Nano110RC2BN,
Nano110RD2BN, Nano110RD3BN

Nano112LB1AN, Nano112LC2AN, Nano112SB1AN, Nano112SC2AN, Nano112RB1AN,

Nano112
Nano112RC2AN, Nano112VC2AN

Nano120VD3AN, Nano120VD2AN, Nano120SD3AN, Nano120SD2AN,

Nano120LD3AN, Nano120LD2AN, Nano120SC2AN, Nano120LC2AN, Nano120ZD3AN,
Nano120 Nano120ZD2AN, Nano120ZC2AN, Nano120KE3BN, Nano120SE3BN, Nano120LE3BN,
Nano120KD3BN, Nano120SD3BN, Nano120SD2BN, Nano120LD3BN,
Nano120LD2BN, Nano120SC2BN, Nano120LC2BN

Nano130VD3AN, Nano130KE3BN, Nano130SE3BN, Nano130KD3BN,

Nano130
Nano130KD2BN, Nano130SD3BN, Nano130SD2BN, Nano130KC2BN, Nano130SC2BN

NDA102 NDA102EC1, NDA102FC1 NDA103EC1, NDA103FC1, NDA102SD2

ICP Tool Revision History

M251FC2AE, M251EC2AE, M251ZC2AE, M251SC2AE, M251LC2AE, M251SD2AE,

M251LD2AE, M251ZD2AE, M251KE3AE, M251SE3AE, M251LE3AE, M251KG6AE,
M251SG6AE, M251LG6AE, M252FC2AE, M252EC2AE, M252ZC2AE, M252SC2AE,
M252LC2AE, M252SD2AE, M252LD2AE, M252ZD2AE, M252KE3AE, M252SE3AE,
M251 M252LE3AE, M252KG6AE, M252SG6AE, M252LG6AE, M254SD3AE, M254SE3AE,
M254PD3AE, M254PE3AE, M254KD3AE, M254KE3AE, M256SD3AE, M256SE3AE,
M256PD3AE, M256PE3AE, M256KD3AE, M256KE3AE, M258SD3AE, M258SE3AE,
NuMicro® M258PD3AE, M258PE3AE, M258KD3AE, M258KE3AE, M253ZE3AE, M253LE3AE,
M23 Family M253LD3AE

M261KIAAE, M261SIAAE, M261ZIAAE, M262KIAAE, M262SIAAE, M262ZIAAE,

M261
M263KIAAE, M263SIAAE, M263ZIAAE

M2351 M2351KIAAE, M2351SIAAE, M2351ZIAAE, M2351SFSIAAP

M2354 M2354ES, M2354KJFAE, M2354SJFAE, M2354LJFAE

M451VG6AE, M451VE6AE, M451RG6AE, M451RE6AE, M451LG6AE, M451LE6AE,

NuMicro® M451RD3AE, M451RC3AE, M451LD3AE, M451LC3AE, M452VG6AE, M452VE6AE,
M451
M4 Family M452RG6AE, M452RE6AE, M452LG6AE, M452LE6AE, M452RD3AE, M452LD3AE,
M452LC3AE, M453VG6AE, M453VE6AE, M453RG6AE, M453RE6AE, M453LG6AE,

Dec 4, 2020 Page 12 of 15 Rev. 3.05

 ICP Tool Revision History

M453LE6AE, M453VD3AE, M453RD3AE, M453LD3AE, M453LC3AE, M451MLG6AE,

M451MLE6AE, M451MSD3AE, M451MSC3AE, M451MLD3AE, M451MLC3AE,
M4LEDRG6AE, M4LEDRE6AE, M4LEDLG6AE, M4LEDLE6AE, M4TKVG6AE,
M4TKVE6AE, M4TKRG6AE, M4TKRE6AE, M4TKLG6AE, M4TKLE6AE

M4521 M4521SE6AE, M4521LE6AE

M471KI8AE, M471VI8AE, M471VG7AE, M471QI8AE, M471QG7AE, M471R1E6AE,

M471
M471R1D6AE, M471SE6AE, M471SD6AE, M471MD6AE

M479 M479SG8AEE, M479LG8AEE, M479NG8AEE

M481SIDAE, M481LIDAE, M481ZIDAE, M482KIDAE, M482SIDAE, M482LIDAE,

M482ZIDAE, M483KIDAE, M483SIDAE, M485KIDAE, M485SIDAE, M485LIDAE,
M487JIDAE, M487KIDAE, M487SIDAE, M487KMCAN, M481SGCAE, M481SGCAE2A,
M480
M481LGCAE, M481LE8AE, M481ZGCAE, M481ZE8AE, M482KGCAE, M482SGCAE,
M482SE8AE, M482LGCAE, M482LE8AE, M482ZGCAE, M482ZE8AE, M483KGCAE,
M483SGCAE, M483SE8AE, M483KGCAE2A, M483SGCAE2A

NUC472HI8AE, NUC472HG8AE, NUC472JI8AE, NUC472JG8AE, NUC472KI8AE,

NUC472KG8AE, NUC472VI8AE, NUC472VG8AE, NUC442JI8AE, NUC442JG8AE,
NUC400
NUC442KI8AE, NUC442KG8AE, NUC442VI8AE, NUC442VG8AE, NUC442RI8AE,
NUC442RG8AE

NUC505DLA, NUC505YLA, NUC505YLA2Y, NUC505DSA, NUC505DL13Y,

NUC505
NUC505DS13Y, NUC505YO13Y

NM1100 NM1100XBAE, NM1100FBAE

NM1120 NM1120FC1AE, NM1120EC1AE, NM1120XC1AE, NM1120ZC1AE

NM1200 NM1200LBAE, NM1200TBAE, NM1200ZBAE

NM1230 NM1234D, NM1232D, NM1220EBK0, NM1234Y, NM1232Y, NM1233D, NM1233Y

ICP Tool Revision History

NM1240 NM1243D48, NM1243Y48, NM1243Y NM1244D48, NM1244Y48, NM1244Y

NM1320 NM1320LC2AE
Motor NM1330 NM1330LC1AE, NM1330LD2AE
Control
NM1510LC1AE, NM1520LC2AE, NM1520LD2AE, NM1520RC2AE, NM1520RD2AE,
NM1500
NM1530VD3AE, NM1530VE3AE, NM1530LE3AE

NM1810 NM18100Y, NM18101Y, NM18105Y, NM18107Y, NM1817NT

NM18200S, NM18201S, NM18202S, NM1820ZB0AE, NM18200D, NM18200Y,

NM1820
NM18201Y, NM18202Y

NM1830 NM18307Y

TF5100 TF5103D, TF5103Y, TF5102Y

I94124A, I94123A, I94121A, I94120A, I94114A, I94113A, I94111A, I94110A, I94134A,

I94000 I94133A, I94131A, I94130A, I94124B, I94123B, I94113B, I94124C, I94123C, I94113C,
Audio
I94124E, I94124D, I94124P, I94124N, I94124G, I94124S, I94124Z, I94100A, I941R00A
Control
I9160 ISD9160, ISD9160, ISD9140, ISD9130, ISD9160V, ISD9160I, ISD9160S, ISD9160C,

Dec 4, 2020 Page 13 of 15 Rev. 3.05

 ICP Tool Revision History

ISD9160C2, ISD9160T, ISD9145

I91300 I91361, I91361C, I91331

I91200 I91260, I91260C, I91230, I91230C, I91260B, I91260G, I91230G, I91230P

I91000 I91032F, I91032C, I91032T

N569S250, N569S500, N569S750, N569S1K0, N569S1K5, N569S2K0, N569S3K0,

N569S4K0, N569S8K0, N569SAK0, N569S251, N569S501, N569S751, N569S1K1,
N569S
N569S1K6, N569S2K1, N569S3K1, N569S4K1, N569S8K1, N569SAK1, N569SBK2,
N569S502, N569SAK2

N569J N569J502L, N569J1K0L, N569J2K0L, N569J4K0L

N570 N570F064, N570C064, N570B12, N570H064, N570HC64

N570J08AL, N570J16AL, N570J32AL, N570J04DL, N570J08DL, N570J16DL,

N570J N570J32DL, N570J64DL, N570J131GL, N570J256GR, N570J512GR, N570J01GR,
N570J08DF, N570J16DF, N570J09DF

N570S04A, N570S08A, N570S16A, N570S32A, N570S64A, N570S128, N570SC04,

N570SC08, N570SC16, N570SC32, N570SC64, N570SCA2, N570S04B, N570S08B,
N570S
N570S16B, N570S32B, N570S64B, N570S129, N570SC05, N570SC09, N570SC17,
N570SC33, N570SC65, N570SCA3, N570S256, N570S130

N571 N571P032

N572F064, N572F065, N572F072, N572C065, N572C072, N572S08A, N572S16A,

N572S32A, N572S64A, N572SC08, N572SC16, N572SC32, N572S6C4, N572U08A,
N572 N572U16A, N572U32A, N572U64A, N572U128, N572S08B, N572S16B, N572S32B,
N572S64B, N572SC09, N572SC17, N572SC33, N572S6C5, N572U08B, N572U16B,
N572U32B, N572U64B, N572U129
ICP Tool Revision History

N575C145, N575F145, N575A145, N575S08A, N575S16A, N575S32A, N575S64A,

N575
N575S08B, N575S16B, N575S32B, N575S64B

Dec 4, 2020 Page 14 of 15 Rev. 3.05

 ICP Tool Revision History

5 Resources

Website Details

https://www.nuvoton.com/tool-and-software/software-development-
tool/programmer/
NuTool on nuvoton.com
 Download the latest NuTool installation file.
 View the NuTool revision history.

https://github.com/OpenNuvoton/Nuvoton_Tools
NuTool on GitHub
 Check the open source example code of NuTool for easier development.

ICP Tool Revision History

Important Notice
Using this software indicates your acceptance of the disclaimer hereunder:
THIS SOFTWARE IS FOR YOUR REFERENCE ONLY AND PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. YOUR USING THIS SOFTWARE/FIRMWARE IS BASED
ON YOUR OWN DISCRETION, IN NO EVENT SHALL THE COPYRIGHT OWNER OR PROVIDER BE LIABLE TO ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Dec 4, 2020 Page 15 of 15 Rev. 3.05