Technical specification
Cold Milling Machine W 1900
Technical specification
Cold milling machine W 1900
Milling width 2,000 mm
Milling depth * 1
0 – 320 mm
Milling drum
Tool spacing 15 mm
Number of tools 162
Drum diameter with tools 980 mm
Engine
Manufacturer Daimler Chrysler
Type OM 502 LA
Cooling Water / Air (intercooler)
Number of cylinders 8
Rated power at 2,000 min-1 340 kW / 455 HP / 462 PS
Maximum power at 1,800 min-1 350 kW / 469 HP / 476 PS
Displacement 15.9 l
Fuel consumption, full load 84 l / h
Fuel consumption in field mix 38 l / h
Emission standards EPA Tier III, EU Stage III a
Electrical system 24 V
Filling capacities
Fuel tank 850 l
Hydraulic fluid tank 270 l
Water tank 1,600 l (+ 1,000 l additional water tank)
Driving characteristics
Travel speed in milling gear, max. 0 – 29.5 m / min
Travel speed in travel gear, max. 0 – 4.5 km / h
Crawler tracks
Crawler tracks front and rear (L x W x H) 1,600 x 260 x 550 mm
Loading the milled material
Belt width of primary conveyor 800 mm
Belt width of discharge conveyor 800 mm
Theoretical capacity of discharge conveyor 290 m3 / h
Shipping dimensions
Machine (L x W x H) 6,600 x 2,550 x 3,000 mm
Discharge conveyor (L x W x H) 8,500 x 1,300 x 1,150 mm
*1 = The maximum milling depth may deviate from the value indicated, due to tolerances and wear.
Dimensions in mm
14,200
13,550
6,730
4,500
3,000*
3,000
875 1,950 2,000 770
120 800
45°
800
1,300
2,500
1,550
1,400
235
131
160
45°
* = Machine height with optional cyclonic air filter: 3,030 mm
2 // 3
Standard weights of cold milling machine W 1900
Own weight 25,400 daN (kg)
Operating weight, CE* 26,680 daN (kg)
Operating weight, max. (full tanks, full range of equipment) 31,900 daN (kg)
Add-on weights
FCS Light milling drum assembly
FCS Light milling drum assembly, milling width 2,000 mm,
660 daN (kg)
milling depth 0 – 320 mm, number of cutting tools: 162
Optional equipment
Canopy 250 daN (kg)
Folding conveyor 360 daN (kg)
Additional water tank 1,000 l (unfilled) 820 daN (kg)
* = Weight of machine with half-full water tank, half-full fuel tank, driver (75 kg) and tools.
Special equipment: Canopy, folding conveyor and additional water tank
Dimensions in mm
10,950
3,600
3,000
1,000
Rear view W 1900
Dimensions in mm
320
610 1,400
235
2,500
4 // 5
Turning radius of cold milling machine W 1900 at 150 mm milling depth
Dimensions in mm
00
,3
10
in
=
m
R
45°
45°
0
90
3,
in
=
m
R
Equipment features of cold milling machine W 1900
Standard equipment: Optional equipment:
Basic machine with engine Basic machine with engine
Air compressor system Special painting, one or several colours
Large storage compartments for cutting tool containers Milling drum assembly
Highly effective soundproofing of entire engine compartment Milling drum housing for milling width 2,000 mm, FCS Light
Standard painting in Wirtgen white with orange stripes Pneumatic cutting tool driver and extractor
Milling drum assembly Mounting carriage for milling drums
Hydraulically lifting drum plates Milling drum
Additional lock-valve for scraper blade Milling drum with milling width 2,000 mm, HT11, LA8 FCS
Additional control switches for scraper blade and steering Milling drum with milling width 2,000 mm, HT5, LA6x2 FCS
functions at ground level Milling drum with milling width 2,000 mm, HT11, LA15 FCS-Light
Right-hand side plate in hinged design Machine control system
Hydraulically opening scraper blade with convenient lock LEVEL PRO automatic levelling system
mechanism Additional LEVEL PRO control panel
Replaceable wearing segments on side plates Slope sensor
Hydraulically lifting side plates, clearance 330 mm Loading the milled material
Milling drum Hydraulically operated folding discharge conveyor, long
Standard assembly with milling width 2,000, HT11 Operator’s platform
Multiple-use ejector system Canopy
Machine control system Miscellaneous
Digital electric height indication Additional water tank 1,000 l
Automatically engageable hydraulic traction control (flow divider) Hydraulically operated high-pressure water cleaner,
Automatically engaging maximum milling speed control 150 bar, 15 l /min
Freely selectable steering modes of crawler tracks
Automatically engaging high-pressure water system, 3,5 bar, 45 l / min
Engaging water injection in milling chamber
Engaging water spray system at primary conveyor
Loading the milled material
Discharge conveyor slewing angle left 45 degrees
Discharge conveyor slewing angle right 45 degrees
Conveyor system with adjustable conveying speed
Hydraulically lifting primary conveyor
Operator’s platform
Convenient control panel with practical switches
Lockable covers for control panels
Individually adjustable driver's seat
Vibration-damped operator's platform
Access left and right with convenient fold-away ladder
Exterior rear view mirror
Travelling gear / Height adjustment
Extremely wear-resistant polyurethane track pads
4-track steering
Height adjustment via proportional valve control
Miscellaneous
Lighting package with 11 spotlights
Comprehensive tool kit
Comprehensive safety package with 5 emergency stop buttons
6 // 7
Wirtgen GmbH
Reinhard-Wirtgen-Strasse 2 · 53578 Windhagen · Germany
Phone: +49 (0) 26 45 /131-0 · Fax: +49 (0) 26 45 /131-242
Internet: www.wirtgen.com · E-Mail: info@wirtgen.com
Illustrations are without obligation. Subject to technical changes.
Performance data depend on operational conditions. – No. 24-20 EN-03/10 © by Wirtgen GmbH 2010. Printed in Germany
