Scribd
Upload
62 views1 page

Rigs Presentation

The document summarizes the specifications of a drilling rig designed for fast operation in temperatures ranging from -20C to 40C. It can drill oil and gas wells up to 2000 meters deep. Key capabilities include a 100 ton hook capacity, 1000 HP triplex pumps, a 600 HP engine, and a top drive with 26,035 foot-pounds of torque. The rig is mounted on a heavy duty semitrailer for off-road operation.

Uploaded by

Manish Kumar Sharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views1 page

Rigs Presentation

The document summarizes the specifications of a drilling rig designed for fast operation in temperatures ranging from -20C to 40C. It can drill oil and gas wells up to 2000 meters deep. Key capabilities include a 100 ton hook capacity, 1000 HP triplex pumps, a 600 HP engine, and a top drive with 26,035 foot-pounds of torque. The rig is mounted on a heavy duty semitrailer for off-road operation.

Uploaded by

Manish Kumar Sharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Design and basic rig designed in accordance

with API Specifications, designed for fast moving

HH102 operation. The rig and its accessories are designed


to operate in climate temperatures from minus 20oC
to plus 40oC.
Drill pipe stands handling Range
3 (single)
Hydraulic with Caterpillar engine, Max pull 220,000 lbs (100 metric ton)
for drilling oil and gas wells up to Mast clear height from ground level
87.9 ft (26.8 m)
2,000 m Top drive torque 26,035 lbs-ft
(3530 daNm)
Top drive stroke 52 ½ ft (16 m)
100 tf hook capacity
Max pull down 44,000 lbs (20 metric ton)
Max power 600 hp (447.5 kW)
1000 HP triplex pumps Weight in transport condition 99,200 lbs
(45 metric ton)
Trailer a semitrailer heavy duty type for
Mongoose shakers off-road operation with:
- welded frame made of high-grade steel
- braking system consisting of a double circuit air
operated by brakes
- pneumatic operated front and rear suspension for
perfect leveling
- walkway and handrails
- stairs from ground to semitrailer
Power pack Diesel engine C18 - ACERT with
hoisting power of 600 hp at 1800 RPM continuos
rate, water cooled
Crown block fixed to mast telescopic section
complete with 4 sheaves of crown block (diameter
25 ½" - grooves 34 mm) and wire line sheave
(diameter 25" - grooves 5/8")
Rotary table DRILLMEC design, driven by
2 hydraulic motors
Substructure made of high-grade steel
complete with:
- rails and trolley to facilitate the sliding of BOP to
the well centerline
- one stairway from drill floor to trailer
- the rotary table is flush with the working floor
- one ramp for casing
- one set of handrails
- control cabin frame
Top drive driven by 4 top-head hydraulic motors
assembled on a special dolly sliding on mast guide,
equipped with hydraulic brake
- I.D. full opening 3"
- variable speed 0 to 154 rpm
- torque range 0 to 26,000 lbft
- max torque 26,000 lbft (35826 Nm) to 66 RPM
- stroke 52'6"
- casing clearance 52'6"
- max pull up 220,000 lbs
- max pull down 44,000 lbs
- max working pressure 5000 psi

You might also like