TUR SMN 800/930/1100 TUR 4SMN 930/1100
Exceptional stability with high precision and unrivalled quality, FAT lathes will provide many years The design of machine is been based on proven, high quality TUR SMN. The wide step bed ensures great
of reliable service for your business. The best combination of price and high efficiency – your most cost stability and geometrical accuracy. Step bed allows machining workpiece without collision between saddle
effective solution. We are confident there is no better choice for your work shop on the market today! and steady rests.
TUR SMN 800/930/1100 is a high precision, high quality European product 100% manufactured in Poland.
The purchased parts used in all our products only come from world leaders in machine tools parts manufacture
and supply.
Special execution of TUR 4SMN with dedicated tooling system
for train axle. Thanks to this exceptional solution both shaft and
wheels can be machined in one clamping.
Special, mono-block type bed made of cast iron is a rigid
structure which perfectly absorbs vibrations. Extra wide,
deeply hardened and ground guide ways 3-V ensure
precise machining and excellent surface quality. All of the
above guarantee long-life accurate operation of the lathe.
The headstock is made of one mono-block casting. Hand
scraped contact surfaces ensure the best fit and durable The enormous wide 1-piece mono-bloc bed with 3-V prismatic guide ways is made
alignment. High precision spindle bearings guarantee from high-grade cast iron.
excellent stability and accuracy of machining. The biggest advantage of TUR 4SMN is bed’s design. It has 4 guide ways: 2 outer for
carriage and other 2 outer for steady rests. Thanks to this execution the tooling system
drives over steady rests without collision.
The standard tailstock has 125mm quill diameter. For heavy duty
machining the diameter can be increased up to 140mm or 160mm
The quill is located in a specially extended body. Optionally the
tailstock can be equipped with hydraulic quill, bearing system for Longitudinal travel is performed by means of rack and pinion TUR 4SMN 930 x 10 000 with hydraulic self-centering
Easy access to the working area. the dead center, independent NC drive and hydraulic clamping mechanism. Automatic backlash compensation ensures steady rests. Automatic approach to the working
Surprisingly small distance to spindle axis system to the bed. Master&slave system. position allows machining of bigger diameters.
A wide range of rests is available
OPTIONAL EQUIPMENT: to suit diffrent machining
applicatins: manual, hydraulic
self-centring, steady or follow
Tailstock executions: rests, C-form, ring rests and
other.
Wide variety of manual, hydraulic and
pneumatic chucks
Quill operated both manually and
LED light front Oil mist collector
hydraulically
Hydraulic tailstock quill
Heavy-duty tailstock with 160 mm
quill diameter for increased rigidity
and load capacity
Full enclosure
Spindle equipment: C axis:
Tooling system:
Full contouring C axis with
Available independent, direct drive
spindle ø140mm on the spindle enables
(standard), precise milling operations
220mm, ø320mm, with interpolating work
ø360mm, 450mm Second spindle nose piece.
Parat toolpost with optional Disc turret for static tools Combination of two 4-positions
Capto seat Sauter head-type turrets
Milling-drilling units:
WTO system (VDI50)
enables drilling and
milling operations with
a high torque. Normal
turning is still possible.
Available version with
Y-axis and Capto seat.
Sauter head-turret with milling Sauter or Baruffaldi turret for driven tools with C axis Standard Multifix D1 toolpost Tooling system mounted on Unit mounted on tool turret
unit on the rear T-slots cross-slide T slots
TECHNICAL PARAMETERS
MACHINE STANDARD EQUIPMENT Surprisingly easy programming!
TUR SMN with Siemens 840D SL allows you to work manually,
CNC Siemens 840D SL semi-automatic or full CNC. The user friendly Siemens Shop
Toolpost type Multifix Size D1 Turn Conversational Programming System will make your work
TUR 930 SMN TUR 1100 SMN
Tube lights (24V) in working area efficient and enjoyable. TUR 800 SMN
TUR 930 4SMN TUR 1100 4SMN
Complete coolant system
Essential features: CAPACITY
Hydraulic aggregate easy programming using graphics and without need
Distance between centres
Independent Z position operator panel for knowledge of DIN/ISO (other lengths on special request)
mm 2.000 – 3.000 – 4.000 – 5.000 – 6.000 – 8.000 … 16.000
Come-along system – quick coupling between extremely short programming time
Swing over bed mm 800 950 1.100
tailstock and carriage clear display of all technical in machining sequence
Emergency switch between tailstock and carriage prevention of invalid inputs thanks dynamic online graphics Swing over saddle mm 500 630 790
Full rear guarding with sliding access doors simply management of tools Max. weight between centres (option) kg
4.000 4.000 4.000
(7.000) (7.000) (7.000)
Hand wheels for manual operation wide range of standard machining
and measuring cycles Max. weight in chuck only kg 1.000 1.000 1.000
Automatic lubrication system
Automatic gear change HEADSTOCK
USB Port Spindle speed range rpm 4 - 1.800 4 - 1.200
Absolute encoders
Main drive motor power (S6) kW 33 33 33
Turning torque Nm 4.100 4.900 4.900
Spindle bore mm 140 140 140
Optional execution
Spindle bore mm 165 220 320 360 450
SADDLE
Cross slide travel X-axis mm 505 570 610
Rapid travel Z-axis m/min 6 6 6
Rapid travel X-axis m/min 6 6 6
TAILSTOCK
125 125 125
Quill diameter mm
(140/160 option) (140/160 option) (140/160 option)
Large 15” touchscreen
Quill taper size MT 6 (MT5 for option with bearing system)
Quill stroke mm 300 300 300
GENERAL
Width of bed mm 622 622 622
Total length of machine
2.000 / 3.000 / 4.000 / 5.000 / 6.000 /… / 16.000 mm b.c. mm 4.400 / 5.400 / 6.400 / 7.400 / 8.400 / … / 18.400
Width of machine mm 3.050 3.050 3.050
Heavy-duty boring bar attachment mounted on rear T-slots. Fanuc or Fagor controller as an option Height of machine mm 2.000 2.100 2.250
Weight of machine (approx.)
2.000 mm b.c. kg 11.200 11.700 12.200
3.000 mm b.c. kg 12.300 12.800 13.300
4.000 mm b.c. kg 13.500 14.000 14.500
5.000 mm b.c. kg 14.800 15.300 15.800
6.000 mm b.c. kg 16.200 16.700 17.200
16.000 mm b.c. kg 27.200 27.700 28.200
Scrappers with compressed Bellows cover
air for guideways
Additional coolant tank with filtration and high
pressure pump
www.fathaco.com
FAT Haco offers you the benefit of our vast experience – since the year 1945 over 50.000 machine tools
have been sold in many countries around the world!
Our excellently equipped machine shop, assembly facility, research office and our own foundry allows us to
manufacture most components by ourselves - complete from casting to the finished product. FAT works
closely with you to develop the absolute best product for your needs. Our experience and quick reaction
time will save you both time and money.
Together, let’s make creative imagination our only limitation!
1869: foundation as a Locksmith Company
metal work company of Gustav Trelenberg – for
1906: production of steel construction for the builiding
industry, railways, trams and industrial locomotives.
production of simple planing machines, saws and drills,
later specializing in manufacturing horizontal lathes:
1945: TUC40, TUD40/50/63, TUR50/63 which were very well
known in Poland and overseas markets.
1992: delivered the 50.000th machine tool made by FAT
expanded the range of lathes to include universal
1995: lathes TUR 560/630/710, TUR 50/63/68 cnc lathes
and highly productive multi-spindle automatics
FAT joined the HACO GROUP
- new investments and increased production
1998: of mn & cnc lathes
- new machine shop
- production of modern teach-in lathes using
state-of-the-art Technology
- special projects
- new sales strategy through dealer network
- taking over a cast-iron foundry in Koluszki
- production of the heavy duty 4-guide ways lathes
Representative:
Fabryka Automatów Tokarskich S. A.
Grabiszyńska Street 281
PL 53-234 Wrocław POLAND
GPS: N 51.09567, E. 16.97921
Office:
Phone: +48 71 36 09 100
Fax: +48 71 36 09 121
info@fathaco.com www.fathaco.com
