MATERIAL SAFETY DATA SHEET
Product Trade Name: PERCUSSION PRIMER ASSEMBLY
Revision Date: 27-Mar-2012
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE
COMPANY/UNDERTAKING
Statement of Hazardous Nature Hazardous according to the criteria of NOHSC, Dangerous Goods according to the
criteria of ADG.
Manufacturer/Supplier Halliburton Australia Pty. Ltd.
15 Marriott Road
Jandakot
WA 6164
Australia
ACN Number: 009 000 775
Telephone Number: 61 (08) 9455 8300
Fax Number: 61 (08) 9455 5300
Product Emergency Telephone
Australia: 08-64244950
Papua New Guinea: 05 1 281 575 5000
NewZealand: 06-7559274
Fire, Police & Ambulance - Emergency Telephone
Australia: 000
Papua New Guinea: 000
New Zealand: 111
Identification of Substances or Preparation
Product Trade Name: PERCUSSION PRIMER ASSEMBLY
Synonyms: None
Chemical Family: Explosive
UN Number: , UN0044
Dangerous Goods Class: 1.4S
Subsidiary Risk: None
Hazchem Code: 2W
Poisons Schedule: None Allocated
Application: Explosive Charge
Prepared By Chemical Compliance
Telephone: 1-580-251-4335
e-mail: fdunexchem@halliburton.com
2. COMPOSITION/INFORMATION ON INGREDIENTS
Substances CAS Number PERCENT Australia New Zealand ACGIH TLV-TWA
NOHSC WES
Potassium perchlorate 7778-74-7 Unknown Not applicable Not applicable Not applicable
Titanium 7440-32-6 Unknown Not applicable Not applicable Not applicable
PERCUSSION PRIMER ASSEMBLY
Page 1 of 6
2. COMPOSITION/INFORMATION ON INGREDIENTS
Silica, amorphous 7631-86-9 Unknown TWA: 2 mg/m3 Not applicable 2 mg/m3
Non-Hazardous Substance to Total of 100%
3. HAZARDS IDENTIFICATION
Hazard Overview Explosive. May cause eye, skin, and respiratory irritation. May effect the blood's
ability to carry oxygen. May be harmful if swallowed.
Risk Phrases R9 Explosive when mixed with combustible material.
R22 Harmful if swallowed.
HSNO Classification 5.1.1B Oxidising Substances - Liquids or Solids 6.1D Acutely Toxic Substances
6.3B Mildly irritating to the skin 6.4A Irritating to the eye 6.8C Produce toxic human
reproductive or developmental effects on or via lactation 6.9A Toxic to human target
organs or systems 9.1B Ecotoxic in the aquatic environment 9.2B Ecotoxic in the
soil environment 9.3C Harmful to terrestrial vertebrates
4. FIRST AID MEASURES
Inhalation If inhaled, remove to fresh air. If not breathing give artificial respiration, preferably
mouth-to-mouth. If breathing is difficult give oxygen. Get medical attention.
Skin In case of contact, immediately flush skin with plenty of soap and water for at least 15
minutes. Get medical attention. Remove contaminated clothing and launder before
reuse. Destroy or properly dispose of contaminated shoes.
Eyes In case of contact, or suspected contact, immediately flush eyes with plenty of water
for at least 15 minutes and get medical attention immediately after flushing.
Ingestion Do not induce vomiting. Slowly dilute with 1-2 glasses of water or milk and seek
medical attention. Never give anything by mouth to an unconscious person.
Notes to Physician Treat symptomatically.
5. FIRE FIGHTING MEASURES
Suitable Extinguishing Media Water fog, carbon dioxide, foam, dry chemical.
Extinguishing media which must None known.
not be used for safety reasons
Special Exposure Hazards Flammable solid, may detonate under adverse conditions. Oxidizer. May ignite
combustibles. Sprinkler and/or deluge systems recommended for bulk storage
areas.
Special Protective Equipment for Full protective clothing and approved self-contained breathing apparatus required for
Fire-Fighters fire fighting personnel.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautionary Measures Use appropriate protective equipment. Use only competent persons for cleanup.
Environmental Precautionary Prevent from entering sewers, waterways, or low areas.
Measures
PERCUSSION PRIMER ASSEMBLY
Page 2 of 6
Procedure for Cleaning / Isolate area and remove sources of friction, impact, heat, low level electrical current,
Absorption and RF energy. Scoop up and remove.
7. HANDLING AND STORAGE
Handling Precautions Do NOT consume food, drink, or tobacco in contaminated areas. Avoid contact with
eyes, skin, or clothing. Avoid creating or inhaling dust. Wash hands after use.
Launder contaminated clothing before reuse.
Storage Information Keep away from friction, impact, and heat. Store away from combustibles.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Controls Use in a well ventilated area.
Respiratory Protection Dust/mist respirator. (N95, P2/P3)
Hand Protection Cloth gloves.
Skin Protection Cotton coveralls, undergarments, and socks. Conductive soled shoes. Anti-static
clothing.
Eye Protection Chemical goggles; also wear a face shield if splashing hazard exists.
Other Precautions Eyewash fountains and safety showers must be easily accessible.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Color: Gray to black
Odor: Odorless
pH: Not Determined
Specific Gravity @ 20 C (Water=1): Not Determined
Density @ 20 C (kg/l): Not Determined
Bulk Density @ 20 C (kg/m3): Not Determined
Boiling Point/Range (C): Not Determined
Freezing Point/Range (C): Not Determined
Pour Point/Range (C): Not Determined
Flash Point/Range (C): Not Determined
Flash Point Method: Not Determined
Autoignition Temperature (C): 204
Flammability Limits in Air - Lower (g/m3): Not Determined
Flammability Limits in Air - Lower (%): Not Determined
Flammability Limits in Air - Upper (g/m3): Not Determined
Flammability Limits in Air - Upper (%): Not Determined
Vapor Pressure @ 20 C (mmHg): Not Determined
Vapor Density (Air=1): Not Determined
Percent Volatiles: Not Determined
Evaporation Rate (Butyl Acetate=1): Not Determined
Solubility in Water (g/100ml): Insoluble
Solubility in Solvents (g/100ml): Not Determined
VOCs (g/l): Not Determined
Viscosity, Dynamic @ 20 C (centipoise): Not Determined
Viscosity, Kinematic @ 20 C (centistokes): Not Determined
Partition Coefficient/n-Octanol/Water: Not Determined
Molecular Weight (g/mole): Not Determined
Decomposition Temperature (C): Not Determined
PERCUSSION PRIMER ASSEMBLY
Page 3 of 6
10. STABILITY AND REACTIVITY
Stability Data: Stable
Hazardous Polymerization: Will Not Occur
Conditions to Avoid May detonate with friction, impact, heat, and low level electrical current.
Incompatibility (Materials to Strong alkalis. Strong acids. Combustible materials. Organic matter. Reducing
Avoid) agents.
Hazardous Decomposition Carbon monoxide and carbon dioxide. Chlorine.
Products
Additional Guidelines Not Applicable
11. TOXICOLOGICAL INFORMATION
Principle Route of Exposure Eye or skin contact, inhalation. All explosives are dangerous and must be handles
carefully and used following approved safety procedures under the direction of
competent, experience persons in accordance with all applicable regulations and
ordinances.
Sympotoms related to exposure
Inhalation May cause respiratory irritation. May cause blood disorders including prolonged
weakness and fatigue.
Skin Contact May cause skin irritation.
Eye Contact May cause eye irritation.
Ingestion May reduce the blood's ability to transport oxygen (methemalobinemia).
Aggravated Medical Conditions Blood disorders. Eye ailments.
Chronic Effects/Carcinogenicity No data available to indicate product or components present at greater than 1% are
chronic health hazards.
Other Information None known.
Toxicity Tests
Oral Toxicity: Not determined
Dermal Toxicity: Not determined
Inhalation Toxicity: Not determined
Primary Irritation Effect: Not determined
Carcinogenicity Not determined
Genotoxicity: Not determined
Reproductive / Not determined
Developmental Toxicity:
12. ECOLOGICAL INFORMATION
Mobility (Water/Soil/Air) Not determined
PERCUSSION PRIMER ASSEMBLY
Page 4 of 6
Persistence/Degradability Not applicable
Bio-accumulation Not determined
Ecotoxicological Information
Acute Fish Toxicity: Not determined
Acute Crustaceans Toxicity:Not determined
Acute Algae Toxicity: Not determined
Chemical Fate Information Not determined
Other Information Not applicable
13. DISPOSAL CONSIDERATIONS
Disposal Method Disposal should be made in accordance with federal, state, and local regulations.
Contaminated Packaging Follow all applicable national or local regulations.
14. TRANSPORT INFORMATION
Land Transportation
ADR
UN0044,Primers, Cap Type, 1.4S, II
EX-9703143
Air Transportation
ICAO/IATA
UN0044,Primers, Cap Type, 1.4S, II
EX-9703143
Sea Transportation
IMDG
UN0044,Primers, Cap Type, 1.4S, II
EX-9703143
EmS F-B, S-X
Other Transportation Information
Labels: Explosive 1.4S
15. REGULATORY INFORMATION
Chemical Inventories
Australian AICS Inventory All components listed on inventory or are exempt.
New Zealand Inventory of This product does not comply with NZIOC
Chemicals
US TSCA Inventory All components listed on inventory or are exempt.
EINECS Inventory This product, and all its components, complies with EINECS
PERCUSSION PRIMER ASSEMBLY
Page 5 of 6
Classification O - Oxidizing.
Xn - Harmful.
Risk Phrases R9 Explosive when mixed with combustible material.
R22 Harmful if swallowed.
Safety Phrases S2 Keep out of reach of children.
S13 Keep away from food, drink, and animal feeding stuffs.
S22 Do not breathe dust.
S27 Immediately take off all contaminated clothing.
16. OTHER INFORMATION
The following sections have been revised since the last issue of this SDS
Not applicable
Contact
Australian Poisons Information Centre
24 Hour Service: - 13 11 26
Police or Fire Brigade: - 000 (exchange): - 1100
New Zealand National Poisons Centre
0800 764 766
Additional Information For additional information on the use of this product, contact your local Halliburton
representative.
For questions about the Safety Data Sheet for this or other Halliburton products,
contact Chemical Compliance at 1-580-251-4335.
Disclaimer Statement This information is furnished without warranty, expressed or implied, as to accuracy
or completeness. The information is obtained from various sources including the
manufacturer and other third party sources. The information may not be valid under
all conditions nor if this material is used in combination with other materials or in any
process. Final determination of suitability of any material is the sole responsibility of
the user.
***END OF MSDS***
PERCUSSION PRIMER ASSEMBLY
Page 6 of 6
