Scribd
Upload
117 views2 pages

SOP LumoScan

The document provides instructions for using the LumoScan scanner. It describes two operator apps - LumoScanFast for quick scans and LumoScan for controlling cameras, sensors, and motors. It then lists seven steps for the quick start process: 1) ensure cameras are in pro mode, 2) enter patient ID and name, 3) select lighting of white, violet, or UV, 4) scan, 5) reset after download finishes, 6) repeat steps 2-5 with violet light, and 7) repeat steps 2-5 with UV light.

Uploaded by

Ananya Munjal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
117 views2 pages

SOP LumoScan

The document provides instructions for using the LumoScan scanner. It describes two operator apps - LumoScanFast for quick scans and LumoScan for controlling cameras, sensors, and motors. It then lists seven steps for the quick start process: 1) ensure cameras are in pro mode, 2) enter patient ID and name, 3) select lighting of white, violet, or UV, 4) scan, 5) reset after download finishes, 6) repeat steps 2-5 with violet light, and 7) repeat steps 2-5 with UV light.

Uploaded by

Ananya Munjal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

C

CTReP Location: Department of Dermatology


Johns Hopkins Outpatient Center
601 N. Caroline Street,
8th Floor, Suite 8033
Baltimore, MD 21287
Phone: 410-502-7546

LUMO SCANNER SOP

LumoScan provides rapid imaging of the entire body for forensic pathologists and dermatologists
using visible, violet and long wave-length UV light.

User Orientation and Set up

I. Operator APPs

1. LumoScanFast (dark): Easy and one-time scan.

2. LumoScan (bright): Functions to control cameras, depth sensors, and motors.

II. Quick Start

* Please make sure all the cameras are under “Pro Mode” in the Camera APP and “Screen

Off”.

1. Step1: Click Bright LumoScanFast -> Function -> Control Cameras -> Camera
Status: “Pro Mode” and Check “Smartphone Power Button” on and off to
make sure the phone screen showing “JPG-L” (pro mode). Exit the Bright
LumoScanFast app.

2. Step 2: Click Dark LumoScanFast -> Type in “Patient ID” and “Patient Name
(same with study ID)”
C

CTReP Location: Department of Dermatology


Johns Hopkins Outpatient Center
601 N. Caroline Street,
8th Floor, Suite 8033
Baltimore, MD 21287
Phone: 410-502-7546

3. Step3: Check one of the three different lightings each time: ”White”

“White”, “Violet”, “UV”

4. Step4: Scan

5. Step5: After the automatic download is finished (shown in terminal), press


Reset Cycle.

6. Step6: Repeat step 2-5 and choose a different light setting – “Violet”.

7. Step7: Repeat step 2-5 and choose a different light setting – “UV”.

8. No need to turn off the computer or the system.

You might also like