Scribd
Upload
400 views1 page

Generic Design of Plumbing System For Restaurant Type of Tenant

This document provides a generic design for the plumbing system of a restaurant tenant space. It includes details on electric water heaters, water supply piping using PPR material, and a drainage system using PVC pipes. Notes cover adhering to fixture drops, locating water hammer arrestors, accounting for relocated water heaters, and using floor drains, clean-outs, and grating drains for drainage fixtures.

Uploaded by

ssarang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
400 views1 page

Generic Design of Plumbing System For Restaurant Type of Tenant

This document provides a generic design for the plumbing system of a restaurant tenant space. It includes details on electric water heaters, water supply piping using PPR material, and a drainage system using PVC pipes. Notes cover adhering to fixture drops, locating water hammer arrestors, accounting for relocated water heaters, and using floor drains, clean-outs, and grating drains for drainage fixtures.

Uploaded by

ssarang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

GENERIC DESIGN OF PLUMBING SYSTEM

FOR RESTAURANT TYPE OF TENANT

1.2 KW POWER REQMT.


50 LTS. CAPACITY

EWH
1.2 KW POWER REQMT.
50 LTS. CAPACITY

EWH
1.2 KW POWER REQMT.
50 LTS. CAPACITY
EWH

1.2 KW POWER REQMT.


50 LTS. CAPACITY
EWH
SCHEDULE FOR ELECTRIC WATER HEATERS
CAPACITY POWER SUPPLY QTY.
TAG NO UNIT DESCRIPTION DESCRIPTION

NOTES :

DESIGN OF WATER SUPPLY SYSTEM


· SIZING IS BASED ON IPC (INTERNATIONAL PLUMBING CODE).
· RECOMMENDED PIPING MATERIAL - PPR (POLY-PROPYLENE RANDOM)
· THE CONTRACTOR SHALL ENSURE THE DROPS IN WALL PRIOR TO SANITARY FIXTURE
SHALL ADHERE TO THE REQUIREMENT OF THE FIXTURE.
· WHA (WATER HAMMER ARRESTOR) LOCATION IS INDICATIVE & SHALL BE STUDIED
UPON WITH REFERENCE TO PDI (PLUMBING DRAINAGE INSTITUTE) GUIDELINES FOR
DECIDING THE LOCATION FOR OPTIMUM PERFORMANCE.
· IN CASE INDIVIDUAL WATER HEATERS ARE RELOCATED, IT MAY AFFECT THE PIPE
ROUTING & HENCE THE PIPE SIZING. SUCH IMPACT SHALL BE TAKEN INTO
CONSIDERATION BY THE CONTRACTOR.

FCO FCO
INTERCEPTOR

INTERCEPTOR
GREASE

GREASE
FD

FD

REQUIREMENT OF DRAINAGE SYSTEM


· THERE ARE 2 TYPES OF PIPES IN THE DRAINAGE SERVICES AS FOLLOW
'SP' - SOIL PIPING
'WP' - WASTE PIPING
· DRAINAGE FIXTURES USED ARE
'FD' - FLOOR DRAIN
'FCO' - FLOOR CLEAN-OUT
'SGD' - SQUARE GRATING DRAIN
· PIPE & FITTINGS SHALL BE OF PVC SCH. 40/CLASS 4 TYPE MATERIAL; APPROVED BY
SASO.
· ALL ABOVE GROUND PIPES SHALL HAVE SOLVENT WELD TYPE INSTALLATION.
· SANITARY FIXTURE SHALL BE STUDIED UPON FOR RECOMMENDED PIPING
CONNECTION THAT FURTHER ADVANCES TO THE MAIN PIPING.
· EMBEDDED PIPING EXECUTION SHALL NOT HOLD TRUE WITHOUT THE APPROVAL OF
CIVIL ENGINEERING DISCIPLINE ON BASIS OF APPROVED BUILDER WORK'S DRAWINGS.
· THE SYSTEM ASSUMES WALL HUNG TYPE WESTERN WATER CLOSET. IT SHALL BE
THOROUGHLY STUDIED FOR THE CARRIER DETAILS & CONNECTIONS.
· CONDENSATE DRAIN FROM THE A/C EQPTS. MUST BE EQUIPPED WITH VENTED TRAP &
FURTHER TO BE CONNECTED TO THE SITE CONDENSATE DRAINAGE NETWORK.

You might also like