A Global Leader in the Design, Development, and
Manufacture of Sensor and Magnetic Components
Series Datasheet – HE Reed Relays www.standexmeder.com
HE Series
Reed Relays
Features: High Voltage Relay, Through-Hole / Axial Wire Option, Compact Design, Special Pin-Outs
Applications: High Voltage Test Sets, Cable Testers, Medical Equipment & Others
Markets: Medical, Test and Measurement & Others
Part Description: HE 00-0X-00-00
Nominal Voltage Contact QTY Contact Form Switch Model Pin Out
05, 06, 12, 24, 48 1, 2 A, B 69, 83 02, 03, 150, 300
Customer Options Switch Model
Unit
Contact Data 69 83
Rated Power (max.) 50 50 W
Any DC combination of V&A not to exceed their individual max.’s
Switching Voltage (max.) 10,000 7,500 V
DC or peak AC
Switching Current (max.) 3.0 3.0 A
DC or peak AC
Carry Current (max.) 5.0 5.0 A
DC or peak AC
Contact Resistance (max.) 150 150 mOhm
@ 0.5V & 50mA
Breakdown Voltage (min.) 15 10 kVDC
According to EN60255-5
Operating Time (max.) 3.0 3.0 ms
Incl. Bounce; Measured with w/ Nominal Voltage
Release Time (max.) 1.5 1.5 ms
Measured with no Coil Excitation
Insulation Resistance (typ.) 1012 1012 Ohm
Rh<45%, 100V Test Voltage
Capacitance (typ.) 0.2 0.2 pF
@ 10kHz across open Switch
USA: +1.866.782.6339 │ salesusa@standexmeder.com Version 01
Europe: +49.7731.8399.0 │ info@standexmeder.com 27.01.2015
Asia: +86.21.37820625 │ salesasia@standexmeder.com
Modifications in the sense of technical progress are reserved.
A Global Leader in the Design, Development, and
Manufacture of Sensor and Magnetic Components
Series Datasheet – HE Reed Relays www.standexmeder.com
Coil Data
Coil Voltage Coil Resistance Pull-In Voltage Drop-Out Voltage Nominal Coil Power
Contact Switch (nom.) (typ.) (max.) (min.) (typ.)
Form Model
Unit VDC Ohm VDC VDC mW
12 110 9 1 1,310
69
24 465 18 2 1,240
1A
12 260 9 1 554
83
24 1050 18 2 554
12 260 9 1 554
69
24 1,050 18 2 548
1B*
12 410 9 1 351
83
24 1,520 18 2 378
2A 83 12 140 9 1 1,000
The Pull-In / Drop-Out Voltage and Coil Resistance will change at rate of 0.4% per °C.
* Re-closure of Form B may occur if the max. coil voltage is exceeded. Coil polarity on Form B must be observed. Pin 2 is positive.
Environmental Data Unit HE Reed Relay
Shock Resistance (max.) 50 g
1/2 sine wave duration 11ms
Vibration Resistance (max.) 20 g
Operating Temperature -20 to 70 °C
Storage Temperature -35 to 105 °C
Soldering Temperature (max.)
260 °C
5 sec. max.
Handling & Assembly Instructions
Switching inductive and/or capacitive loads create voltage
and/or current peaks, which may damage the relay.
Protective circuits need to be used. Life Test Data
External magnetic fields needs to be taken into *Load increase reduces life expectancy of Reed Switches
consideration, including a too high packing density. This may
influence the relays’ electrical characteristics.
Mechanical shock impacts e.g. dropping the relays may cause
immediate or post-installation failure.
Wave soldering: maximum 260°/5 seconds.
Reflow soldering: Recommendations given by the soldering
paste manufacturer need to be considered as well as the
temperature limits of other components/processes.
USA: +1.866.782.6339 │ salesusa@standexmeder.com Version 01
Europe: +49.7731.8399.0 │ info@standexmeder.com 27.01.2015
Asia: +86.21.37820625 │ salesasia@standexmeder.com
Modifications in the sense of technical progress are reserved.
A Global Leader in the Design, Development, and
Manufacture of Sensor and Magnetic Components
Series Datasheet – HE Reed Relays www.standexmeder.com
Glossary Contact Form
NO = Normally Open Contacts
Form A
SPST = Single Pole Single Throw
NC = Normally Closed Contacts
Form B
SPST = Single Pole Single Throw
Changeover
Form C
SPDT = Single Pole Double Throw
Pin Outs
Dimensions available in Product Datasheets.
USA: +1.866.782.6339 │ salesusa@standexmeder.com Version 01
Europe: +49.7731.8399.0 │ info@standexmeder.com 27.01.2015
Asia: +86.21.37820625 │ salesasia@standexmeder.com
Modifications in the sense of technical progress are reserved.
