COR IBR600 ( Integrated Broadband Router ) PORTS & SWITCHES FINDING YOUR PASSWORD ACTIVATE YOUR MODEM

QUICK START GUIDE

WiFi ANTENNA
CONNECTOR (RSMA) A wireless broadband data plan must be added to your IBR600. Wireless broadband data plans are
Your unique default password is shown on the
ETHERNET CONNECTIONS
or
WiFi ANTENNA available from wireless carriers such as Sprint, Verizon, AT&T, and Clearwire. Mobile broadband, M2M,
ACTIVE GPS
CONNECTOR (SMA POWER
COMPUTERS
or LOCAL DEVICES
ETHERNET
DATA SOURCE MICRO CONNECTOR product label on the bottom of your router. It is and Router pricing plans are available. To add or transfer a line of service you will need to provide a
with included adapter) 12VDC
( LAN )
default
( WAN )
default
USB (RSMA)
also the last eight characters of the MAC unique identifier such as ESN for 3G EVDO modems or IMEI/MEID for LTE or HSPA+ modems. LTE and
SETTING UP THE ROUTER Address.
FOR -PWD MODELS RESET
HSPA+ plans require a SIM. SIM provisioning for LTE and HSPA+ models is done the same way as for
USB modems. Once provisioned insert the SIM into the router until it clicks into place, close the SIM
1 ) Purchase a data plan. Then insert the SIM if model requires. You will be asked for this password when you door, and turn on the power switch. After adding a data plan to the Verizon 3G EVDO model the modem
log into the administration pages. The default may need to be activated. Log in to the IBR600 administration pages (see below) and select Internet
password provides security for your router from the top navigation bar and then Connection Manager from the dropdown menu. Find and select
2 ) Plug the power supply into an electrical outlet. dual-stream n out-of-the-box. the CradlePoint “EVDO Modem” and click Control and then click Activate. When modem activation is
complete, confirm the modem LED is solid green on the router.
3 ) Connect WiFi (2.4) and modem ( , , ) antennas (finger tight only).
WiFi ANTENNAS Default SSID: IBR600-xxx (last 3 characters of
(2.4)
the MAC Address) For more information on activation see www.cradlepoint.com/activation.
Finger Tight Only
Purchase and connect active GPS antenna for -PWD models (SMA adapter included).

4 ) Connect the power supply to the IBR600.

MAIN MODEM
ANTENNA
CONNECTOR
POWER
POWER
LED
WiFI
MODEM
LED
SIGNAL
AUXILIARY MODEM
ANTENNA
CONNECTOR
find this label on the bottom of your router
USING THE FIRST TIME SETUP WIZARD
ACTIVE GPS
ON/OFF
SPECIAL FEATURES
STRENGTH
Ensure power is switched on. o = OFF | = ON (SMA)
LED
LEDS
(SMA) The First Time Setup Wizard will help you customize the name of your wireless network, change passwords
to something you choose, configure WAN failure check, and establish an optimal WiFi security mode. The IBR600
IPSec VPN End-Point Support The IBR600LE-PWD and IBR600LP-PWD now comes with a unique password creating built-in WiFi Security, which prevents unauthorized users from connecting to
What’s In The Box GRE Tunneling
Data Usage Management & Alerts come with an active GPS connection (SMA with your WiFi network.
GPIO Interface included adapter) at 3.3 V and 100 mA max.
GPS (if supported by modem carrier) 1) Open a browser window and type “cp/” or “192.168.0.1” in the address bar. Press ENTER/RETURN.
Failover / Failback
WiFi Hotspot Services For full functionality you will need to purchase a 2) When prompted for your password, type the eight character Default Password found on product label
(Captive Portal/Walled Garden)
IP Passthrough powered GPS antenna separately. The (the last eight characters of the MAC Address).
WiFi as WAN & Dual SSIDs
VLAN Support
IBR600LE-PWD and IBR600LP-PWD include 3) When you log in for the first time, you will be automatically directed to the FIRST TIME SETUP WIZARD.
MODEM ANTENNAS
WiPipe TM Central Remote Management only one WiFi antenna for operation in 1x1 WiFi
USB to Serial Console Passthrough Support
Integrated Broadband Router AC Power Supply Quick Start Guide
( , , )
LAN/WAN Affinity mode. 4) Follow the steps to establish a customized wireless network name, password, and security level.
Mounting Bracket Finger Tight Only
With Modem & WiFi Antennas SIM SLOT
If you are currently using the IBR600 WiFi network, you will need to reconnect your devices to the network
(SIM-BASED VERSIONS ONLY) See Product Manual for suggested antenna positions.
using the newly established wireless network name and wireless security password.
for more information about your product, visit: www.cradlepoint.com 2 To learn more about features, visit: www.cradlepoint.com/IBR600 3 4
 This important Product Information and Safety Guide contains safety, handling, disposal, regulatory, trademark, copyright, and software licensing information. Read all safety information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must WARRANTY INFORMATION CradlePoint, Inc. warrants this product against defects in materials and workmanship to the original purchaser (or the first purchaser in the case of resale

FIRMWARE UPDATES below and operating instructions before using the IBR600 device to avoid injury. accept any interference received, including interference that may cause undesired operation. by an authorized distributor) for a period of one (1) year from the date of shipment. This warranty is limited to a repair or replacement of the product, at CradlePoint’s discretion.
CradlePoint does not warrant that the operation of the device will meet your requirements or be error free. Within thirty (30) days of receipt should the product fail for any reason other
SAFETY AND HAZARDS Under no circumstances should the IBR600 device be used in any areas (a) where blasting is in progress, (b) where explosive atmospheres may be IMPORTANT NOTE than damage due to customer negligence, purchaser may return the product to the point of purchase for a full refund of the purchase price. If the purchaser wishes to upgrade or convert
present, or (c) that are near (i) medical or life support equipment, or (ii) any equipment which may be susceptible to any form of radio interference. In such areas, the IBR600 device FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed to another CradlePoint, Inc. product within the thirty (30) day period, purchaser may return the product and apply the full purchase price toward the purchase of another CradlePoint

CradlePoint regularly makes new feature support and performance enhancements MUST BE POWERED OFF AT ALL TIMES (since the device otherwise could transmit signals that might interfere with such equipment). In addition, under no circumstances should the
IBR600 device be used in any aircraft, regardless of whether the aircraft is on the ground or in flight. In any aircraft, the IBR600 device MUST BE POWERED OFF AT ALL TIMES (since
and operated with minimum distance 20cm between the radiator & your body. product. Any other return will be subject to CradlePoint, Inc.’s existing return policy.

available for our products in a software package called “firmware”. Updating firmware the device otherwise could transmit signals that might interfere with various onboard systems on such aircraft). Furthermore, under no circumstances should the IBR600 device be Industry Canada Statement LIMITATION OF CRADLEPOINT LIABILITY The information contained in this Quick Start Guide is subject to change without notice and does not represent any commitment on the
used by the driver or operator of any vehicle. Such use of the device will detract from the driver’s or operator’s control of that vehicle. In some jurisdictions, use of the IBR600 device This device complies with RSS-210, RSS-102, and RSS-Gen of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful part of CradlePoint or its affiliates. CRADLEPOINT AND ITS AFFILIATES HEREBY SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL: (A) DIRECT, INDIRECT, SPECIAL, GENERAL,
ensures your IBR600 is ready for today and tomorrow’s technology. while driving or operating a vehicle constitutes a civil and/or criminal offense. interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING WITHOUT LIMITATION FOR LOSS OF PROFITS OR REVENUE OR OF ANTICIPATED PROFITS OR REVENUE
ARISING OUT OF THE USE OR INABILITY TO USE THE IBR600 DEVICE, EVEN IF CRADLEPOINT AND/OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES,
Due to the nature of wireless communications, transmission and reception of data by the IBR600 device can never be guaranteed, and it is possible that data communicated or For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and its antenna(s) must not be AND EVEN IF SUCH DAMAGES ARE FORESEEABLE; OR (B) CLAIMS BY ANY THIRD PARTY. Notwithstanding the foregoing, in no event shall the aggregate liability of CradlePoint and/or
To Update Your Firmware, Follow The Steps Below: transmitted wirelessly may be delayed, corrupted (i.e., contain errors), or totally lost. The IBR600 device is not intended for, and CradlePoint recommends the device not be used in co-located or operation in conjunction with any other antenna or transmitter. its affiliates arising under or in connection with the IBR600 device, regardless of the number of events, occurrences, or claims giving rise to liability, exceed the price paid by the original
any critical applications where failure to transmit or receive data could result in property damage or loss or personal injury of any kind (including death) to the user or to any other
purchaser of the IBR600 device.
1) Connect your computer to the IBR600 via its WiFi network broadcast or an Ethernet cable to the LAN port. party. CradlePoint expressly disclaims liability for damages of any kind resulting from: (a) delays, errors, or losses of any data transmitted or received using the device; or (b) any IMPORTANT NOTE: Radiation Exposure Statement
failure of the device to transmit or receive such data. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm PRIVACY CradlePoint collects general data pertaining to the use of CradlePoint products via the Internet including, by way of example, IP address, device ID, operating system,
between the radiator and your body.
2) Open a browser window and type “cp/” or “192.168.0.1” in the address bar. PRESS ENTER/RETURN. Warning: This product is only to be installed by qualified personnel!
browser type and version number, etc. To review CradlePoint’s privacy policy, please visit: http://www.cradlepoint.com/privacy.

This device has been designed to operate with an antenna having a maximum gain of 5 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. OTHER BINDING DOCUMENTS; TRADEMARKS; COPYRIGHT By activating or using your IBR600 device, you agree to be bound by CradlePoint’s Terms of Use, User License and
3) Enter your password to log in. Your unique password is the administrator password you set earlier or To comply with FCC regulations limiting both maximum RF output power and human exposure to RF radiation, for the IBR600E the maximum antenna gain must not exceed 5 dBi in The required antenna impedance is 50 ohms. other Legal Policies, all as posted at www.cradlepoint.com/legal. Please read these documents carefully. CradlePoint, the CradlePoint logo, and IBR600 are trademarks of
the default password found on the bottom label. the cellular band and 3 dBi in the PCS band. For the IBR600LE the maximum antenna gain must not exceed 8 dBi in the cellular band, 3 dBi in the PCS band and 10 dBi in the LTE
CradlePoint, Inc.
band. For the IBR600LP the maximum antenna gain including cable loss must not exceed 7.5 dBi in the cellular band, 3 dBi in the PCS band, 5.5 dBi in LTE Band 4, and 9 dBi in Déclaration d’Industrie Canada
LTE Band 17. For the IBR600P the maximum antenna gain including cable loss must not exceed 7.5 dBi in the cellular band, 3 dBi in the PCS band. Ce dispositif est conforme à la norme CNR-210, CNR-102, et CNR-Gen d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux
4) Select SYSTEM SETTINGS on the top navigation bar, then SYSTEM SOFTWARE in the dropdown menu. © 2012 CradlePoint, Inc. All Rights Reserved.
conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, provoquer un fonctionnement indésirable. Part Number: 170581-003
5) Find the FIRMWARE UPGRADE section. This will display the current firmware version that is installed pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
and indicate if updated firmware is available. NOTE IMPORTANTE (Pour l’utilisation de dispositifs mobiles): Déclaration d’exposition aux radiations
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: de 20 cm de distance entre la source de rayonnement et votre corps.
6) Click AUTOMATIC (Internet) if new firmware is available. The router will download and install the firmware
• Reorient or relocate the receiving antenna.
and automatically reboot itself. A status monitor will appear and indicate when this process is complete. This Ce dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximal de 5 dBi. Une antenne à gain plus élevé est strictement interdite par les règlements d’Industrie
• Increase the separation between the equipment and receiver.
process may take several minutes depending on your Internet connection speed. Canada. L’impédance d’antenne requise est de 50 ohms.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

7) If your router does not have an active Internet connection (ie: modem not activated, no Ethernet WAN) you will
OPEN SOURCE SOFTWARE This product contains software distributed under one or more of the following open source licenses: GNU General Public License Version 2, NetBSD
need to download the latest firmware from www.cradlepoint.com to your desktop, then use the FCC CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Foundation License, and PSF License Agreement for Python 3.1.1. For more information on this software, including licensing terms and your rights to access source code, contact
MANUAL FIRMWARE UPLOAD option. CradlePoint at www.cradlepoint.com/opensource.

5 6 7 8