802 Series Data Sheet
High Voltage Power Supply
Capacitor Charging and DC
Output Voltage from 1kV - 50kV
Output Power 8kJ/sec or 8kW
Full local and remote control
· ·
Trusted Innovative Reliable
www.us.lambda.tdk.com
802 Series Specification
Industry standard rack mount capacitor charging and DC power supplies with 8kJ/sec rat-
ing for capacitor charging, or 8kW rating in continuous DC applications.
• Power rating of 8kJ/sec, 9kJ/sec peak • UL Approved AC line contactor (optional for OEM models)
• Output Voltages from 0-1kV to 0-50kV • Ultra reliable and rugged industry standard design
• Compact air cooled rack mount package • Passive PFC (pf = 0.85)
• Efficient IGBT based resonant inverter • Full local output voltage and HV On/Off controls (L version)
• Excellent pulse to pulse repeatability • Simple parallel operation for higher power
• 208 or 400VAC 3Ø input voltage • Lab, Slave, or OEM front panel options
• Comprehensive remote control interface
Average Capacitor Charging Power 8,000 Joules/sec (½CV2 x Rep Rate)
Peak Capacitor Charging Power 9,000 Joules/sec (½CV2 ∕ tcharge)
Average Continuous DC Power 8,000 Watts
Output Voltage Range 1, 2, 4, 5, 10, 15, 20, 30, 40, 50kV, variable from 10-100% of rated
Polarity Available as fixed Positive or Negative. Please specify at time of ordering
HV Output Cable 1-39kV Models - DS2124 Coaxial cable with proprietary HV connector
40-50kV Models - DS2214 Coaxial cable with proprietary HV connector
HV Insulating Medium Shell Diala S2 or equivalent insulating oil
AC Input Voltage 208VAC (180-264), 3Ø - Suffix 3P208 or
400VAC (340-460), 3Ø + N - Suffix 3P400. Specify at time of ordering
AC Input Current 40A/25A
AC Connector UL/CSA approved terminal block. 3Ø + for 208VAC, 3Ø + N + for 400VAC
AC Line Contactor UL/CSA approved AC line contactor (standard on 802L and 802S, option for 802-OEM)
Power Factor Passive PFC pf = 0.85 at full load and nominal AC line
Efficiency Better than 85% at full load
Front Panel 802L - Voltage Control, Voltage & Current Meters, Status Indicators
802S - On/Off Switch, Status Indicators
802-OEM - Blank front panel
Stability 0.2% per hour after 1 hour warmup
Temperature Coefficient 100ppm per °C typical
Stored Energy Less than 0.3J all models
Pulse to Pulse Repeatability ±2% to 1000Hz, consult factory for higher rep rates
Dimensions - inches (mm) 19 (483) W x 8.72 (222) H x 17 (432) D
Weight - lbs (kg) 80 (37)
Ambient Temperature Storage: -40 to +85°C. Operating: -20 to +45°C
Altitude Storage: 40,000ft (12,000m), Operating: 9,900ft (3,000m)
Humidity 10-90%, non-condensing
Protection Open/short circuits, Overloads, Arcs, Overtemp, Overvoltage, Safety Interlock
Remote Control (all models) Via 25-pin D-sub connector on rear of unit, Signals include, Vprogram (0-10V),
HV Enable/Reset, Inhibit, Summary Fault, Load Fault, Vanalog, Vpeak
Accessories 10ft HV cable, operating manual
Options EN - Low Enable. Replaces standard high enable
5V - 0-5V Analog programming. Replaces standard 0-10V programming.
LP - Latching Overload Protection, requires HV reset after overload fault
DC - Continuous DC operation
CT - AC line contactor (option for 802OEM models only, standard on 802L and 802S)
Double terminated HV cable, and mating bulkhead connector
Ordering Info Model - XXkV - POS (or NEG) - 3PYYY - ZZ (options)
Ordering Examples 802L-10kV-POS-3P208, 802S-1kV-NEG-DC-3P208, 802-OEM-50kV-POS-3P400
All specifications subject to change without notice
1| 802 Series Data Sheet
802 Series Mechanical Details
802L Front View 802L Rear View
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
1 - HV On/Off Push Buttons (L model only) 8 - HV Output Connector
2 - Status Indicator LEDs (L and S models only) 9 - Ground Stud
3 - Local/Remote Keyswitch (L model only) 10 - Inhibit BNC (L models only)
4 - 10-Turn HV Output Control (L models only) 11 - Cooling Fan
5 - View Set Push Button (L models only) 12 - Interlock Terminals
6 - Output Voltage and Current Displays (L models only) 13 - Slave Supply Programming Connector (L models only)
7 - Power Switch (L and S models only) 14 - AC Input Terminal Block
15 - Remote Programming Connector
Outline Drawings
TO SLAVE
MODEL 802L STATUS VOLTAGE
HV ON ADJUST
HV ON 10 TURN INC kV
HV OFF
8.72" / 222mm
INHIBIT REMOTE
0 10 20 30 40 50 60 70 80 90 100 110
END OF CHARGE
HV OFF INTERLOCK OPEN
CURRENT
LOAD FAULT
OVERTEMP A
!
%
0 20 40 60 80 100 120 140
CONTROL
OFF
REMOTE LOCAL
VIEW SET POWER
INHIBIT INTERLOCK
+ +
L1 L2 L3 N
19" / 483mm 17" / 432mm
Chassis slide mounting holes
17" / 432mm
Notes:
1 - Chassis slide mounting pattern matches General Devices CT series or equivalent with 3.875" hole spacing.
2 - Cooling air exits rear of unit and enters at either side. Do not block air vents or cooling fan and allow several inches
of clearance at rear of unit.
3 - Allow 6" bend radius at rear of unit for HV cable.
802 Series Data Sheet |2
Trusted • Innovative • Reliable
GLOBAL HIGH VOLTAGE NETWORK
NORTH AMERICA BRAZIL
TDK-Lambda Americas Inc., Programmable and High Voltage Suplitec
405 Essex Rd. Neptune, NJ 07753 Rua Sena Madureira 455, Belo Hte - 31340-000
Tel: +1-732-795-4100, Fax: +1-732-922-1441 Tel: +55-31-3498 1177, Fax: +55-31-3441 0841
E-mail: andy.tydeman@us.tdk-lambda.com Email: vendas@suplitec.com.br, Web: www.suplitec.com.br
Web: www.us.lambda.tdk.com
MEXICO
CANADA AcMax De Mexico
ACA TMetrix Calle Rosas No. 139 Col. Bugambilias, Puebla, Pue. C.P. 72580
5805 Kennedy Road Tel: +52-800-211-0060, Fax: +52-264-1445
Mississauga, Ontario L4Z 2G3 Email: edaena@acmax.mx, Web: www.acmax.mx
Tel: +1-800-665-7301 Fax: +1-905-890-1959
E-mail: lambda@aca.ca, Web: tmetrix.com JAPAN KOREA
Electronics Optics Research, Ltd
UK IRELAND 4-26-19 Koenji-Minami
Pulse Power & Measurement Ltd. Suginami-ku, Tokyo 166-0003
65 Shrivenham Hundred Business Park Tel: +81-333-145699, Fax: +81-333-142333
Watchfield, Swindon Email: imamura@eor.jp, Web: www.eor.jp
Wiltshire, SN6 8TY
Tel: +44-1793-784389, Fax: +44-1793-784391 CHINA
Email: sales@ppm.co.uk, Web: www.ppmpower.co.uk TDK-Lambda Shanghai Office
5th Floor Kehui Tower, 1188 Qinzhou Road (North),
FRANCE BELGIUM SPAIN
Xuhui District, Shanghai, 200233 P.R. China
NETHERLANDS LUXEMBOURG Tel: +86-21-64850777, Fax: +86-21-64850666
TDK-Lambda France Email:sales-sh@cn.tdk-lambda.com
3 Avenue du Canada, Parc Technopolis - Bâtiment Sigma Web: www.lambda.tdk.com.cn
91940 Les Ulis
Tel: +33 1 60 12 71 65, Fax: +33 1 60 12 71 66 MALAYSIA
Email: france@fr.tdk-lambda.com TDK-Lambda Malaysia
Web: www.emea.lambda.tdk.com/fr Lot 709, Nilai Industrial Estate,
71800, Nilai,
GERMANY AUSTRIA SWITZERLAND Negeri Sembilan, Malaysia
Guth High Voltage GmbH Tel: +60-3-7957-8800 Fax: +60-3-7958-2400
Spitzenbergstrasse 6
D – 73084 Salach SINGAPORE PHILIPPINES THAILAND
Tel: +49-7162-948930, Fax: +49-7162-9489399 TDK-Lambda Singapore
Email: kontakt@guth-hv.de, Web: www.guth-hv.de 1008 Toa Payoh North # 06-01/08
Singapore 318996
ITALY Tel: +65-6251-7211 Fax: +65-6250-9171
TDK-Lambda France Sas Succursale Italiana Web: www.sg.lambda.tdk.com
Via Giacomo Matteotti 62,
20092 Cinisello Balsamo (MI) INDIA
Tel: +39-02-6129-3863, Fax: +39-02-6129-0900 TDK-Lambda India
Email: info.italia@it.tdk-lambda.com No.989, 1st Cross, 2nd Floor , 13th Main,
Web: www.emea.lambda.tdk.com/it HAL 2nd Stage, Bangalore, Karnataka , India – 560 008
Tel : +91-80-43550500, Fax :+91-80-43550501
SCANDINAVIA BALTICS Email: mathew.philip@in.tdk-lambda.com
Divisoft AB
Sturevägen 3, SE-177 56 Järfälla SOUTH AFRICA
Tel: +46 8 540 248 09, Fax: +46 8 501 096 53 PaR Systems (Pty) Ltd.
Email: iain@divisoft.se, Web: www.divisoft.se Pretoria, South Africa
Tel: +27-12-5480370, Fax: +27-12-5480447
ISRAEL RUSSIA UKRAINE Email: lasers@par.com
TDK-Lambda Israel Ltd. Web: www.par.com/technologies/pulsed-co2-lasers
56th Hachroshet st., Industry zone, Karmiel, 2161401
Tel: +972-3-9024-333, Fax: +972-3-9024-777
Email: info@tdk-lambda.co.il, Web: www.emea.lambda.tdk.com/il
93 008 010 Rev J
TDK-Lambda Americas Inc. 405 Essex Road, Neptune, NJ 07753 USA
Tel: +1 732 795 4100
www.us.lambda.tdk.com
TDK Logo is a trademark or registered trademark of TDK Corporation
© Copyright 2020 TDK-Lambda Americas Inc.
