This project emphasis on design and fabrication of the river waste cleaning machine.
The work
has done looking at the current situation of our national rivers which are dump with crore liters
of sewage and loaded with pollutants, toxic materials, debris etc. The government of India has
taken charge to clean rivers and invest huge capital in many river cleaning projects like
“Namami Gange”, ‘’Narmada Bachao’’ and many major and medium projects in various cities
like Ahmadabad, Varanasi etc. By taking this into consideration, this machine has designed to
clean river water surface. Nowadays almost all the manufacturing process is being atomized in
order to deliver the products at a faster rate. Automation plays an important role in mass
production. In this project we have fabricated the remote operated river cleaning machine. The
main aim of the project is to reduce the man power, time consumption for cleaning the river. In
this project we have automated the operation of river cleaning with help of a motor and chain
drive arrangement. Some needs of automation are described below. Here using RF transmitter
and receiver are to control the cleaning machine. Automation can be achieved through
computers, hydraulics, pneumatics, robotics, etc., of these sources, pneumatics form an attractive
medium for low cost automation.
Design And Fabrication Of River Cleaning Machine. (2017).
Swachhatapukare.comNOVEMBER 2017.
https://swachhatapukare.com/wp-content/uploads/2021/09/Design-And-Fabrication-Of-
River-Cleaning-Machine-2017.pdf
The motive of the project is to automate the sewage cleaning process in drainage, to reduce the
spreading of diseases to human. The black water cleaning process helps to prevent pest infestations by
reducing the residues that can attract and support pests. It also improves the shelf life and sensory
quality of food products. In the proposed system, the machine is operated with remote control to clean
the sewage. Hence, this system avoids the impacts from the sewage waste and its harmful gases. This
helps to prevent the mosquito generation from the wastage. The system has a wiper motor that starts
running as soon as the set-up is switched on. Two power window motors are connected to the wheel
and it is driven with the help of the remote control set-up. The process starts collecting the sewage
wastes by using the arm and it throws back the waste into the bin fixed in the machine at the bottom.
An arm is used to lift the sewage and in turn a bucket is used to collect them. The set-up runs even in
sewage area with water (limited to a particular amount) so that the wastages which floats on the water
surface also gets collected. The garbage which affects the drainage is also picked up and removed. This
system has limited human intervention in the process of cleaning and in turn reduces spreading of
diseases to mankind. Modern services are becoming polarized.
M. Mohamed Idhris, M. Elamparthi, C. Manoj Kumar Dr.N. Nithyavathy, Mr. K. Suganeswaran, Mr. S.
Arun kumar, DESIGN AND FABRICATION OF REMOTE CONTROLLED SEWAGE CLEANING MACHINE
India is holy country & during lots of festival like ganesh visarjan, navratri durga puja & mainly Siahnsth
kumbhmela there is lots of water pollution of Godavari River at Nashik. The water pollution is very
important problem in rivers, ponds and water bodies near Godavari River at Nashik. Due to increase in
water pollution in the form to waste debris; it is hampering the life of aquatic animal and make their life
in danger. Similarly sometimes the aquatic animal tends to eats surface waste debris considering it as a
food; which ultimately cause the death of animals. Due to polluted water many skin diseases to human
kind are observed. So that to reduce the water pollution we are trying to make river cleanup
machine.“River cleanup machine'' a machine which involves the removing the waste debris from water
surface and safely dispose from the water body. The river cleanup machine works on hydropower to
extract waste water debris, plastics & garbage from Godavari river at Nashik
Mr.Abhijeet. M.Ballade, Mr. Vishal.S.Garde, Mr.Akash.S.Lahane and Mr.Pranav.V.Boob Design &
Fabrication of river cleaning system
This paper emphasis on design and fabrication details of the river waste cleaning machine. The work has
done looking at the current situation of our national rivers which are dump with crore liters of sewage
and loaded with pollutants, toxic materials, debris etc. The government of India has taken charge to
clean rivers and invest huge capital in many river cleaning projects like “Namami Gange”, ‘’Narmada
Bachao’’ and many major and medium projects in various cities like Ahmadabad, Varanasi etc. By taking
this into consideration, this machine has designed to clean river water surface. Conventional methods
used for collection of floating waste are manual basis or by means of boat, thrash skimmers etc. and
deposited near the shore of rivers. These methods are risky, costly and time consuming. By considering
all the parameters of river surface cleaning systems and eliminating the drawback of the methods used
earlier, the remote operated river cleaning machine has designed which helps in river surface cleaning
effectively, efficiently and eco-friendly. The “River waste cleaning machine” is used where there is waste
debris in the water body which are to be removed. This machine consists of DC motors, RF transmitter
and receiver, propeller, PVC pipes and chain drive with the conveyor attached to it for collecting
wastage, garbage & plastic wastages from water bodies.
Mr. P. M. Sirsat, Dr. I. A. Khan, Mr. P. V. Jadhav, Mr. P.T. Date Design and fabrication of River Waste
Cleaning Machine
https://swachhatapukare.com/wp-content/uploads/2021/09/Design-And-Fabrication-Of-River-
Cleaning-Machine-2017.pdf
