JTCC JT Construction Chemicals 2017
Neopox Lining Self-leveling Epoxy Flooring
DESCRIPTION A. New Concrete
Neopox Lining is a two-component solvent-free epoxy This concrete must be aged for 28 days, substrate
resin and hardener with great self-leveling property, moisture content must be less than 6%, minimum
specially formulated with specific additives, creating a grade is RC30 of BS 8500-2: 2002 standard, should
seamless flooring system with good chemical and not contain water repellent agent, Pull-off
strength should exceed 1.5 MPa. Substrate should
abrasion resistant.
be sound and free from contamination such as oil
and grease, mortar and paint splashes or curing
USAGE compound residues. Excessive laitance can be
Area of Application Includes: removed by the use of mechanical methods.
Building, Apartment, Commercial, and Shopping B. Old Concrete
flooring. Substrate moisture content must be less than 6%,
Carpark. minimum grade is RC30 of BS 8500-2: 2002
Heavy traffic flooring for Machinery and/or Chemical standard, should not contain water repellent
Plant. agent, Pull-off strength should exceed 1.5 MPa. A
Clean Room like Laboratory. sound, clean substrate is essential to achieve
maximum adhesion. As for new concrete surface,
ADVANTAGES removal of laitance by use of mechanical methods
Great Adhesion with concrete and mortar surface. is preferable. Oil and grease penetration should be
Fast curing, easy to apply, great dust proofing. removed by the use of a proprietary chemical
Easy to apply, multiple choice of application way. degreaser or by hot compressed air treatment.
Any damaged areas or surface irregularities should
PROPERTIES be repaired using one of the Epoxy Putty
Color Green, Grey 2. Excessive dust, debris, and others contaminant
Density, Kg/L Base: 1.70 ± 0.10 material should be removed using high pressure
Hardener: 0.97 ± 0.05 blower or industrial vacuum cleaner.
Mixed: 1.50 ± 0.10 3. Priming.
Viscosity, cPs 5000 ± 500 (mixed) Primer must be applied according to the Technical
Mixing Ratio 5:1 Data (see Neopox #14000 Technical Data).
Pot Life at 25°C Within 20 minutes Neopox Lining should be applying when Neopox
Tack-free Time at °C Within 6 hours #14000 achieved the tacky-free state (60 minutes at
Drying Time at 25°C Within 48 hours 25 °C).
Adhesion Strength More than 1.5 MPa 4. Placing.
Mix thoroughly Neopox Lining Base & Neopox
Tensile Strength More than 20 MPa
Compressive Strength More than 80 MPa Hardener using medium speed (300 – 500 RPM)
Flexural Strength More than 40 MPa mixer with spiral-shaped steel stirrer for 3 minutes
Application Thickness 1.0 – 3.0 mm to achieve consistent quality and color.
Apply thoroughly onto primed surface using brush,
(Dry Film Thickness)
roller or squeegee application depends on
application condition
INSTRUCTION OF USE
1. Surface Preparation
Long term durability of a flooring system is CLEANING
determined by adhesive bond achieved between Tools and equipment just can be clean with acetone or
waterproofing material and substrate. Correct and suitable thinner immediately after use. Cured product
proper substrate preparation prior to body coat only can be removed using mechanical action.
application is the most important step.
June 2017 1
JTCC JT Construction Chemicals 2017
Neopox Lining Self-leveling Epoxy Flooring
PACKAGING
24 Kg per sets consist of:
20 Kg per Pail of Base Part
4 Kg per Pail of Hardener Part SAFETY MEASURES
1.5 Kg/m2 per mm thickness consumption. Impervious gloves and barrier cream should be used
when handling these products.
STORAGE Eye protection should be worn. In case of contact with
Store in the dry conditions between 5 – 30 °C. eyes, wash thoroughly with plenty of water and seek
Put away from sources of heat and naked frames in the medical advice if symptoms persist.
original, unopened packs. If contact with skin occurs, it must be removed before
If stored at high temperatures the shelf life may be curing takes place. Wash off with an industrial skin
reduced. clearer followed by plenty of soap and water. Do not
Neopox Lining should be protected from frost. use solvent.
Ensure adequate ventilation when using these products.
SHELF LIFE
12 months in an unopened and undamaged packaging. DISPOSAL
Spillage of products should be absorbed on to earth,
IMPORTANT NOTES sand or other inert material and transferred to a suitable
Application condition vessel. Disposal of such spillages or empty packaging
1. Relative Humidity (RH) less than 85%. should be in accordance with local waste disposal
2. Surface moisture less than 6%. regulations. For further information, refer to the Product
3. Ambient Temperature 5 – 35 °C. Material Safety Data Sheet.
JTCC JT Construction Chemicals
116, Goyang-ro 115 beon-gil, Worlgot-Myeon Gimpo City, Gyeonggi-Do, 10025 KOREA
June 2017 2
JTCC JT Construction Chemicals 2017
Neopox Lining Self-leveling Epoxy Flooring
Tel: (+82) 31 997 5288
Fax: (+82) 31 997 523
June 2017 3
