SpeedROC 3F

Surface drill rig for marble, granite, and

limestone in the dimension stone industry.
Hole diameter: 28–45 mm (1.1" - 1.8")
Productivity3
The SpeedROC 3F from Epiroc is the latest
generation of drill rig for the dimension stone
quarrying industry. It features three rock
drills which ensures that the rig is both
efficient and productive - regardless of
whether you are drilling in granite, limestone,
marble or sandstone. The SpeedROC 3F
sets a new standard for the dimension stone
quarrying industry.
In order to reduce weight, the feeds and rails are
assembled around a new architecture. This allows the
SpeedROC 3F to feature the same , well-proven carrier
as the SpeedROC 2F. This helps keep the total cost of
ownership at a low level.

All the key components are placed so they are

easily accessible for maintenance and service.
This helps to reduce downtime to minimum and
increase productivity.

Main benefits
Three rock drills for high
productivity

360° carrier rotation and

extensive boom reach
means large coverage area

High capacity dust collector

for a better working environment

2 3
 Technical specifications
The SpeedROC 3F takes DSI
into the third dimension Main Components

• 6 cylinder Doosan DL06 engine Tier 3A/Tier 4 Final • Fast system steel retainer
• Three hydraulic rock drills • Full Radio Remote Control (drilling/boom movement/tramming)
SpeedROC 3F takes productivity in the dimension stone industry to a new dimension. • Three independent feed systems with rail bar • Four independent hydraulic stabilizer legs
The rig drills three holes simultaneously which means the SpeedROC 3F can push • Device for asynchronous approach to the ground of the feeds • Electronic Control System (ECS)
• Dust Collection System • Protective Guard according to EN 16228
up productivity to a whole new level.

+ Adding a third dimension to the stone industry Hole range (recommended) Carrier
The SpeedROC 3F features three Epiroc COP DS5 hydraulic rock Available tophammer rock drill and hole range Metric US Metric US

drills. During field tests in a limestone quarry, each COP DS5 drilled COP DS5 28–45 mm 1.1"–1.8" Tramming speed, max 9 km/h 5.6 mph
Starter rod drill steel (hexagonal shape) 19–22 mm 0.75"–0.87" Ground clearance: Tier 3 350 mm 13.8"
an average of 1.5 meters per minute. This equates to a total of two
Length 3.2 m 10.5' Ground clearance: Tier 4 335 mm 13.2"
kilometers of drilling over an 8 hour shift.
4WD
Four hydraulic stablizer legs
Engine Tramming angles downward/upward max 15° Connot be
Power rating Fuel consumption Tramming angles laterally, max (left, right) 12° combined

Doosan DL06P Tier 4 Final 139 kW/186 hp (at 1 900 rpm) 16 l/h
+ Covering all the angles Doosan DL 06 Tier 3A 120 kW/161 hp (at 2 000 rpm) 4.2 US gal/h
Feed
Extensive boom coverage, 360° carrier rotation and impressive terrainability
Chain feed, hydraulically driven Metric US
allow the SpeedROC 3F to reach almost every part of a quarry. Additionally,
Hydraulic system Feed extension 600 mm 23.6"
four support legs stabilize the rig during drilling so that it can maximize its
Axial pistons variable displacement main pumps x 2 120 cc Feed force, max 6.5 kN 1461 lbf
capabilities.
Gear pilot pump 14 cc Tractive pull, max 6.5 kN 1461 lbf
Total length 4 900 mm 192.9"
Travel length 2 950 mm 116.1"
Electrical system
Voltage 24 V
Control system
+ Safety first Batteries 2x12 V 100 Ah
Alternator 80 A Electronically controlled
The standard Radio Remote Control means the operator is always able to
Additional working lights on drilling unit 2x70 W Radio Remote Control (Tramming/boom movements/drilling)
work safe. It also helps to make positioning easier and provides a better Rear camera for tramming Drilling low start concerning feed force and percussion
overview of operations. Two cameras mounted on the front rail give the Tramming lights Automatic Drilling device
operator a good view of the work area if they prefer to work directly from Advanced anti jamming device
the comfortable cabin. Additionally, a high capacity dust collector helps to
keep the work environment clean. Drilling unit
Oil heating system Dust collector DCT 110D
Oil cooling system Metric US
Proportional control hydraulic valves Filtering area 11 m2 1 118 sq.ft
Suction capacity 320 l/s 678 cfm

A comprehensive
Suction hose diameter 60–100 mm 2.4"–3.9"
Volumes
Epiroc service
Number of filters 11
Metric US

service offering
Auto-cleaning filters
Hydraulic oil tank (Tier 3) 118 l 31.2 gal
Hydraulic oil tank (Tier 4) 128 l 33.8 gal
Even the best equipment requires regular
Hydraulic oil, total (Tier 3) 205 l 54.2 gal Compressor
Even the best
service equipment
to ensure optimalneeds to be
performance.
Hydraulic oil, total (Tier 4) 207 l 54.7 gal Atlas Copco Ekomak IML 00602 Metric US
serviced regularly service
Epiroc provides to makesolutions
sure it sustains
to safe-
Compressor oil 6.5 l 1.7 gal Air flow 42.5 l/s 90 cfm
peak
guardperformance.
an optimized Anrelationship
Epiroc service
between
Diesel engine oil 27 l 7.1 gal Maximum pressure 8 bar 116 psi
solution offers availability
productivity, peace of mind, maximizing
and operational Diesel tank (Tier 3) 350 l 92.5 gal
availability andMining
cost. Epiroc performance
and Rockthroughout
Excavation Diesel tank (Tier 4) 292 l 77.1 gal
the lifetime ofhas
Technique your equipment.
over We focus
2 600 technicians
onworldwide.
safety, productivity and reliability.
By combining the usage of
Epiroc genuine parts with service provided Selection of options
Byby
combining
a certifiedgenuine parts and an
Epiroc technician, Epiroc
you’ll
• Cameras • Tramming by radio remote
service
have afrom our certified
winning technicians,
combination no matter • Automatic drilling device • Protective Guard
weofsafeguard your
where in the productivity
world – wherever
you operate.
you are.

4 5
 Technical specifications Technical specifications

Three rock drills for Long boom reach optimized for

increased efficiency bench drilling and block dressing.

Fast drilling and positioning 360° coverage area saves time

gives high productivity. in tramming and positioning.

Protective guard for 23.3 m2 23.3 m2

operator safety.

11.3 m2 10.3 m2

H H

6 750 mm 6 750 mm
W L

Height and length Weight

Metric US Metric US
Height (H) 3 300 mm 129.9" Standard unit excluding all options and drill rod 26 700 kg 58 863 lb 5 200 mm 5 400 mm
Length (L) 11 000 mm 433.1"
Maximum height Maximum height, rail rotated 90°
Width (W) 2 550 mm 100.4"

+/-15°

600 mm
360°

4 050 mm
+/-90°

+/-20°

3 700 mm

300 mm
Minimum height
Drilling angles, side view Drilling angles, front view

6 7
epiroc.com
commitment drives us to keep moving forward.
Performance unites us, innovation inspires us, and

Count on Epiroc to deliver the solutions you need to

Inspired by innovation.

succeed today and the technology to lead tomorrow.

United in performance.
9868 0172 01 , 2019-06 Örebro, Sweden. Legal Notice © Copyright 2019, Epiroc Rock Drills AB, Örebro, Sweden. All product names in this publication are trademarks of Epiroc. Any unauthorized use or copying of the
contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change
without notice. Consult your Epiroc Customer Center for specific information.