W W W.ELGININD.

COM
Catalog No. EPS-22
Supersedes Catalog No. EPS-18

PERFORMANCE
PARTS
PERFORMANCE PARTS

PERFORMANCE PARTS
WORLD HEADQUARTERS ELGIN WORLD TRADE
1100 Jansen Farm Drive An Elgin Industries Company
Elgin, IL 60123 1100 Jansen Farm Drive
Call Toll-Free: 1-800-323-6764 Elgin, IL 60123
1-847-742-1720 1-847-742-1720
1-847-742-2220 Fax 1-847-742-2225 Fax
sales@elginind.com worldtrade@elginind.com

facebook.com/elginindustries
Social icon

Rounded square
Only use blue and/or white.

@elginindustries
For more details check out our
Brand Guidelines.

CATALOG NO. EPS-22

www.elginind.com
EPS
22
WHERE WORLD-CLASS LIMITED LIFETIME WARRANTY

ELGININD.COM
ENGINES BEGIN. All engine and valve-train components are warranted to be free from defects in workmanship
and materials for as long as the purchaser owns the vehicle into which said merchandise is
installed. This limited warranty applies to the first retail purchaser only and exceeds normal
wear. The warranty is void if the product is not installed correctly or normal recommended
established precautions and installation procedures and testing are not followed.
Whether your goal is to win your class in drag racing or circle
track competition or simply command respect at regional and
Liability is limited to the repair or replacement of the defective part. The manufacturer retains
national car shows, the path to building a world-class engine
sole discretion in determining defective merchandise and assumes no responsibility for
begins with choosing the right parts from the right manufacturer.
diagnosis, removal, and/or installation labor, inconvenience or any other damages or expenses.
Premier engine builders and performance enthusiasts worldwide Except to the extent applicable state law expressly mandates to the contrary, there are no
master this journey with one of the industry’s most respected other warranties of merchantability, fitness for a particular purpose or use, and all other
and enduring brands — Elgin PRO-STOCK® high-performance
obligations or liabilities whether for consequential or other damages (including damages to

PERFORMANCE PARTS
components from USA-based manufacturer Elgin Industries.
related parts) arising out of the items’ sale, use, or operation. Neither the vendor of the item,
From complete power-adding valvetrain packages to our its agent or sales representative or any other person is authorized to waive or alter any form or
impressive lineup of race-winning parts for GM LS Series condition of this warranty.
engines, Elgin PRO-STOCK offers a proven path to
unforgettable performance. To request repair or replacement of a defective item, please return merchandise in its original
carton to the selling dealer. A copy of the dealer’s invoice must accompany the defective item.
BORN AT THE BRICKYARD.
Elgin’s racing heritage dates back to the early years of the
Indianapolis 500 when the iconic Elgin Piston Pin Special —
driven by the likes of Frank Brisko, Duke Nalon and Emil Andres —
IMPORTANT! PLEASE READ
wowed thousands of spectators at the legendary Brickyard. Elgin The use of O.E.M. part numbers or other terminology is solely for the purpose of assisting
technologies were also on display in an array of early stock car in selecting the correct replacement part. In compiling this catalog, reliable sources of
and road racing events, including the grueling Carerra Panamerica information have been used; however, we cannot assume responsibility for errors. Listing of
races of the early 1950s. parts in this catalog does not guarantee their availability, as items are added and subtracted
Fast forward to today: We can help you attack any performance according to market needs and demands. There is no intent to represent any parts herein as
challenge with precision-engineered, USA-quality components being that of the original equipment manufacturer.
crafted from only the finest materials. These include:
There is absolutely no warranty on any parts used in racing applications. There is no warranty
• Camshafts • Top end kits on products that have been physically altered, improperly installed or maintained, used in
improper applications, abused or not used in conjunction with the proper parts.
• Lifters • Oil pumps
• Pushrods • Head bolts Please note: Elgin Industries is not responsible for camshaft compatibility with computer-
controlled engines.
• Rocker arms, studs & kits • Expansion plug kits
• Valves, springs, inserts, • Harmonic balancers
retainers, locks & kits & bolt kits EMISSIONS WARNING! PLEASE NOTE
• Valve guides & seals • Flexplates/flywheels Local, state and federal law prohibit the removal or modification of any type of factory-
& bolts installed emission device or system, or the use of any parts that could increase emissions in
• BLACK ICE™ super-cryo’d
engine parts • Chassis parts vehicles designed for use on public streets or highways. In some states the sale or installation
on emission controlled vehicles of any devise which alters or modifies the original design or
• Timing sets
performance of such vehicle’s emission system is prohibited. Many of the parts listed in this
catalog are intended for use on vehicles competing in competitive events or on other types of
vehicles, which are exempt from the applicable emission control laws. Elgin recommends that
the applicable emission control laws be reviewed prior to installation of any non-standard part.

1-800-323-6764
sales@elginind.com | www.elginind.com
1-800-323-6764 EPS
sales@elginind.com | www.elginind.com © 2022 Elgin Industries, Inc. All rights reserved. No part of this publication covered by the copyrights hereon may be reproduced or
copied in any form or by any means whatsoever without the expressed prior written permission of Elgin® Industries, Inc.
22
 Table of Contents

Camshafts.............................................................1-34 Valve Spring & Retainer Kits.................................... 62

Performance / Muscle Car.............................. 1-31 Valve Locks.............................................................. 63
Marine...........................................................32-34 Valve Spring Inserts................................................. 64
Camshaft Bolt Lock Plate Kit.................................... 35 Valves, Performance...........................................65-66
Cam Buttons............................................................. 35 Valve Guides............................................................ 67
Chemicals................................................................. 35 Valve Stem Seals..................................................... 67
Lifters...................................................................36-40 Timing..................................................................68-72
Mechanical Tappets........................................... 37 Nine Keyway Sets.............................................. 69
Hydraulic Lifters............................................ 37-38 Steel Roller Sets................................................ 69
Hydraulic Roller Lifters....................................... 38 Roller Speed Sets.............................................. 70
Hydarulic Roller Lifter / Guide Assembly........... 39 Oil Pumps............................................................ 71-73
Retro-Fit Roller Lifters....................................... 40 High Pressure.................................................... 72
Push Rods........................................................... 41-50 High Volume...................................................... 72
Length Checkers................................................ 51 High Volume Repair Kits.................................... 73
Guide Plates...................................................... 51 Gear Thrust Plate Kits....................................... 73
Rocker Arms........................................................52-58 Cylinder Head Bolts................................................. 74
Stock LS Engine................................................ 53 Main Bearing Cap Bolts........................................... 75
LS Drop-In Stainless Steel Roller...................... 53 Connecting Rod Bolts.............................................. 75
Stainless Steel Roller Rocker Arms................... 54 Expansion Plug Kits............................................ 76-77
Stamped Steel Roller Tip Kits............................ 55 Harmonic Balancers................................................. 78
Nitro Stock Appearing........................................ 56 Harmonic Balancer Bolt Kits.............................. 78
Stamped Steel................................................... 57 Flexplates/Flywheels................................................ 79
Accessories....................................................... 58 Flexplate / Flywheel Bolts.................................. 79
Valve Springs......................................................59-61 Chassis................................................................80-84
Valve Spring Retainers............................................. 62

INFORMATION:
Camshaft Break-In Procedures i How To Degree Your Camshaft iii
Camshaft Range Guide i-ii

For a complete listing of ELGIN products refer to the following catalogs:

CHASSIS PARTS CP-17 COIL SPRINGS CS-17

ENGINE PARTS EP-18 HEAVY DUTY ENGINE PARTS HDE-18
HEAVY DUTY FRONT AXLE PARTS HD-17

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

Camshafts
Elgin PRO STOCK® Camshafts: The Right Power for Every Engine
Elgin PRO STOCK cam and cam/lifter kits cover every conceivable performance requirement – from oval and
drag racing to street performance to light-truck towing applications to marine engines to RVs. Regardless of
your goal – boost low-end torque, increase fuel economy or just flat-out embarrass the “other guy” – you’ll find
the answer right here.
Each Elgin PRO STOCK camshaft is precision-machined and hardened from a premium-quality blank
manufactured in certified U.S. facilities. As a leading supplier of performance, standard automotive and RV
camshafts, Elgin enjoys a well-earned reputation for quality, performance and value.
But first a few tips...and some hard-and-fast rules:
• Your new cam is highly dependent on the other parts you install. Don’t lose sight of your performance
objective by trying to save a few pennies on other components.
• ALWAYS replace the lifters when installing a new cam. Old lifters will quickly score the lobes of your
new cam, leading to degraded performance and premature failure. Always use Elgin® Engine Pre-Lube
(#EPL-4) on lobes and lifter bottoms.
• Be certain there is adequate CLEARANCE between the valves and pistons after installing your new
cam. Failure to do so could lead to component failure. Also make sure the valve springs DO NOT coil
bind with the new cam.
• Cam break-in procedures MUST be carefully followed to ensure superior performance and reliability.
Do NOT allow the engine to run UNDER 1500 RPM for the first five minutes to one hour! This prevents
spalling of critical cam surfaces, ensuring exceptional service life.

Camshaft Break-In Procedures

Important! As soon as the engine fires, bring the engine RPM to 1500 to 2000 during the first 30 minutes of
operation. Slower engine speeds may not supply the camshaft with an adequate amount of oil for the break-
in period. Change RPM periodically to direct oil splash to different areas of the camshaft. After the 30 minute
break-in period, change the oil and filter again to be sure all contaminants and break-in lube are removed from
the engine. If the camshaft you are using requires double valve springs, we recommend removing the inner
spring for camshaft break-in.
It is highly recommended to use Elgin Remedy ZDDP-4 when breaking in a new flat tappet camshaft. This
exclusive blend of zinc, moly and other proven wear additives will restore today’s oils to pre-OBD quality and
performance and ensure that your new Elgin cam and lifters will not prematurely wear.
There is absolutely no warranty on any parts used in racing applications. There is no warranty on
products that have been physically altered, improperly installed or maintained, used in improper
applications, abused or not used in conjunction with the proper parts.

Understanding Elgin PRO STOCK® Cam Ranges

To help you select the perfect part, Elgin PRO STOCK® cams are organized into five distinct performance
categories, from nearly stock (Range A) to oval track and bracket racing (Range E).
The descriptions that follow cover cam performance characteristics within each Elgin PRO STOCK® range.
(Please note: Durations shown are at .050” cam lift.) Recommended engine/vehicle modifications are listed to
help you achieve your performance goals.

i. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Camshafts
Range A (Hydraulic: Up to 195° Effective Duration)

Smooth stock type idle. Good low end torque in 1600 - 2000 RPM range. Operating power range 1000 -
3200 RPM. Best fuel economy cam with correct equipment. Good choice for heavy towing. Will work with
stock or slightly modified engine, stock automatic or manual transmission. Compression 9.0 to 1 or less.
Recommended spring pressure 95 lbs. for valve on seat; 240 lbs. for valve open. Stock axle ratio 3.50 to 1
and lower. Not recommended for racing.

Range B (Hydraulic: 195° - 210° Effective Duration)

Good to fair idle quality. Good low end torque and response in 1800 - 2600 RPM range. Good low end and
mid-range power in 1500 - 4000 RPM operating range. Good fuel economy cam with correct equipment.
Good choice for light towing. Compression 9.5 to 1 or less. Will work with stock or slightly modified engine,
stock automatic or manual transmission. Recommended spring pressure 105 lbs. for valve on seat; 265 lbs.
for valve open. Stock axle ratio 3.20 to 4.20 to 1 range. Not recommended for racing.

Range C (Hydraulic: 210° - 225° Effective Duration)

(Mechanical: 220° - 235° Effective Duration)

Fair idle quality with lope. Good mid-range torque and response in 2400 - 3200 RPM range. Operating power
range 2000 - 4800 RPM. Good fuel economy cam with correct equipment. Good choice for light towing.
Compression 10.3 to 1 or less. Will work with stock or slightly modified engine, stock automatic or manual
transmission. Recommended spring pressure 110 lbs. for valve on seat; 280 lbs. for valve open. Axle ratio
3.70 to 1 or higher is best. Recommended for mild bracket racing.

Range D (Hydraulic: 225° - 240° Effective Duration)

(Mechanical: 235° - 250° Effective Duration)

Rough idle quality. (Note: Intake vacuum may be too low for power brakes, etc.) Good mid-range torque in
3000 - 4000 RPM range. Good mid-range power operating range 2200 - 5400 RPM. Average fuel economy
cam. Not recommended for towing. Increased compression ratio best, 10.5 to 1 or 11.0 to 1. Some engine
modification required. Use manual or automatic transmission with high stall converter. Recommended
spring pressure 120 lbs. for valve on seat; 300 lbs. for valve open. Axle ratio 3.90 to 4.50 to 1 is best.
Recommended for limited oval track.

Range E (Hydraulic: 240° - 255° Effective Duration)

(Mechanical: 250° - 265° Effective Duration)

Rough idle quality with heavy lope. (Note: Intake vacuum will not operate power brakes, etc.) Good mid to
high RPM torque in 3800 - 5000 range. Good high RPM power, operating range 3200 - 6500 RPM. Average
to poor fuel economy. Definitely do NOT use for towing. Increased compression ratio required 10.5 to 1 to
12.0 to 1. Competition engine modifications required. Use only heavy duty manual or automatic transmission
with high stall converter. Recommended spring pressure 125 lbs. for valve on seat; 325 lbs. for valve open.
Axle ratio 4.20 to 1 is best. Competition headers and valve job recommended. Recommended for oval track
or bracket drag racing.

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries ii.

Camshafts
How To Degree Your Camshaft

Degreeing a camshaft enables you to locate the valve motion in relation to the piston movement or, stated
another way, to identify cam rotation relative to the rotation of the crankshaft. In short, it is an important
step in maximizing engine performance.

Elgin PRO STOCK® engineers recommend using the “lobe center line” method - the easiest and most
accurate process - to degree your cam.

Step 1: Find top-dead-center on the #1 piston.

Step 2: Locate the maximum lift point on the #1 intake lobe. This can be done by placing a dial
indicator on the lifter and rotating the engine until maximum lobe lift is achieved. Note: You’ll
notice the crankshaft will rotate 2 to 3 degrees in either direction without registering on the
indicator. To accurately locate maximum lift point, rotate the engine and allow the lifter to drop
.050” on either side of maximum lift. Then count the number of degrees between these two
points and mark the point halfway between the two outer marks. This is the “theoretical intake
center line,” or maximum lift point.

Step 3: Locate this center line in the proper position in relation to top-dead-center. For example,
if your cam is ground with 106-degree lobe separation and you want to install it straight-up,
simply locate the “intake center line” at 106 degrees from the TDC mark. If you want to advance
it 2 degrees, locate the intake center line at 104 degrees from TDC. (The valve timing diagram
above will help you understand how cam location modifications affect an engine’s torque
characteristics.)

iii. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Classic Muscle Camshafts
Chevrolet Small Block: 8 Cyl. 262-400 CID (1955-02) 1.5 RAR
All Small Block Chevrolet camshafts may be used in the ‘55-56 engines if late model cam bearings are used. Camshafts for the
265 engine must be modified by machining a slot in the rear journal .427” wide and .225”-.235” deep.

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/

Cam # Range Lift Dur. .050 Lap Hot Center OEM #
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-274-S 1500-4000 Int .390 258 194 40 Hyd. 108 HL-1817
Exh .410 269 202 116 3733431/3896929
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-900-P 2000-4800 Int .395 287 228 66 .012 108 VT-1992
Exh .401 287 230 .018 112 3736097
E-903-P 2000-4800 Int .447 290 223 62 Hyd. 110 HL-1817
IICE200903 (Black Ice) Exh .447 290 223 118 3863151
E-921-P 2000-4800 Int .450 292 224 59 Hyd. 114 HL-1817
Exh .460 288 224 114 3896962
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-904-P 2200-5400 Int .459 295 242 67 .020 110 VT-1992
Exh .485 308 254 .025 122 3972178
Oval Track & Bracket Race Cams - Rough Idle with Heavy Lope. Competition Engine Modifications & High
Stall Converter Required. Compression 10.5:1 or 12:1. Spring Pressures - 125 lbs. On Seat - 325 lbs. Open
E-901-P 3200-6500 Int .485 314 254 86 .030 110 VT-1992
Exh .485 314 254 .030 118 3849346
E-902-P 3200-6500 Int .494 304 257 89 .022 108 VT-1992
Exh .512 320 270 .024 116 3927140

Chevrolet Big Block: 8 Cyl. 366-454 CID (1965-00) 1.7 RAR

When installing the following camshafts in the 1991 and later 454 “L19” V8 Engine with a “NET BUILD LASH” non-adjustable
valvetrain, it may be necessary to convert to an adjustable valvetrain by using Pre-’91 valve components. The 1965-66 396 engines did
not have an oil groove in the rear cam bearing bore. When using the camshafts below in these engines, it is necessary to machine a
3/16” wide x 7/64” deep groove in the center of the rear cam journal or the I.D. of the rear cam bearing.

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/

Cam # Range Lift Dur. .050 Lap Hot Center OEM #
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-574-S 1500-4000 Int .398 271 196 44 Hyd. 110 HL-1817
Exh .398 271 196 117 3874872
E-787-S 1500-4000 Int .398 269 193 52 Hyd. 108 HL-1817
Exh .430 278 204 113 3953544/3963544
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-596-S 2000-4800 Int .440 285 210 63 Hyd. 110 HL-1817
Exh .440 295 213 117 353040
E-1589-S 2000-4800 Int .476 290 214 66 Hyd. 110 HL-1817
Exh .496 303 218 120 3883986
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-905-P 2200-5400 Int .520 310 242 75 .020 108 VT-1992
Exh .520 297 242 .024 120 3904362
Oval Track & Bracket Race Cams - Rough Idle with Heavy Lope. Competition Engine Modifications & High
Stall Converter Required. Compression 10.5:1 or 12:1. Spring Pressures - 125 lbs. On Seat - 325 lbs. Open
E-906-P 3200-6500 Int .559 342 264 96 .022 108 VT-1992
Exh .580 333 270 .026 116 3928911

Use Elgin Remedy ZDDP-4 with your cams

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 1.

Classic Muscle Camshafts
Chrysler: 8 Cyl. 273-318 CID (1964-03) 1.5 RAR
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center OEM #
Smooth Stock Idle. Best Fuel Economy Cam. Good Choice for Heavy Towing.
Spring Pressures - 95 lbs. On Seat - 240 lbs. Open
E-577-S 1000-3200 Int .373 264 181 50 Hyd. 110 HL-2011
Exh .400 274 192 108 4227879
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-578-S 1500-4000 Int .429 279 209 50 Hyd. 112 HL-2011
Exh .444 289 220 116 2899206

Chrysler: 8 Cyl. 350-440 CID (1958-78) 1.5 RAR

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center OEM #
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-327-S 1500-4000 Int .431 283 208 64 Hyd. 110 HL-2011
Exh .429 296 210 116 2532190
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-1094-P 2000-4800 Int .447 302 213 87 Hyd. 112 HL-2011
Exh .459 324 225 118 2843564/3512907

Ford: 8 Cyl. 221-302 CID (Exc. H.O.) (1962-01) 1.6 RAR

(Firing Order 1-5-4-2-6-3-7-8). These cams can be used in the 351W & 302 HO engines by re-wiring the distributor to above
Firing Order.

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/

Cam # Range Lift Dur. .050 Lap Hot Center OEM #
Smooth Stock Idle. Best Fuel Economy Cam. Good Choice for Heavy Towing.
Spring Pressures - 95 lbs. On Seat - 240 lbs. Open
E-560-S 1000-3200 Int .368 293 184 62 Hyd. 114 HL-1900
Exh .380 263 189 104 C3AZ-6250-V
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-811-S 2000-4800 Int .477 310 228 82 .018 108 VT-2000
Exh .477 310 228 .018 120 C3OZ-6250-C

Ford: 8 Cyl. 302 H.O. (1985-95) 351W (1994-97) 1.6 RAR

Specifically designed to be used in engines originally produced using roller tappets. Use the 351W Firing Order 1-3-7-2-6-5-4-8 when
using in 1985-95 302 HO engines. Can be used in the 1985-89 302 Standard engine by re-wiring the distributor to Firing
Order 1-3-7-2-6-5-4-8. On EFI applications, a mass air induction system must be used.

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/

Cam # Range Lift Dur. .050 Lap Hot Center OEM #
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-836-S 1500-4000 Int .444 298 210 55 RLR 116 HL-2205
Exh .444 282 211 115 F1ZZ-6250-A

Use Elgin Remedy ZDDP-4 with your cams

2. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Classic Muscle Camshafts
Ford: 8 Cyl. 302 H.O. (1982-85) 351W (1969-91) 1.6 RAR
Firing Order 1-3-7-2-6-5-4-8. These cams are used in the 221 thru 302 engines by re-wiring the distributor to above Firing Order.

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/

Cam # Range Lift Dur. .050 Lap Hot Center OEM #
Smooth Stock Idle. Best Fuel Economy Cam. Good Choice for Heavy Towing.
Spring Pressures - 95 lbs. On Seat - 240 lbs. Open
E-643-S 1000-3200 Int .416 270 194 55 Hyd. 103 HL-1900
Exh .416 270 194 112 C9OZ-6250-A

Ford: 8 Cyl. 330-428 CID (1963-78) 1.73 RAR

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center OEM #
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-572-S 1500-4000 Int .433 273 192 51 Hyd. 113 HL-2083
Exh .436 281 199 111 C7AZ-6250-A
E-573-S 1500-4000 Int .442 274 192 55 Hyd. 108 HL-2083
Exh .442 274 192 111 C6AZ-6250-A

Ford: 8 Cyl. 351C, 351M, 400 CID (1970-82) 1.73 RAR

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center OEM #
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-806-S 2000-4800 Int .481 287 207 63 Hyd. 120 HL-1900
Exh .489 307 221 110 D2ZZ-6250-B

Ford: 8 Cyl. 370-460 CID (1968-99) 1.73 RAR

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center OEM #
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-589-S 1500-4000 Int .437 273 193 53 Hyd. 110 HL-1900
Exh .480 287 206 116 C8SZ-6250-A

Oldsmobile: 8 Cyl. 260-455 CID (1967-85) 39° Bank Angle 1.6 RAR
The following camshaft base circles are 0.100” to 0.150” smaller diameter than stock camshafts. Since these engines have
non-adjustable rocker arms, the use of longer push rods or adjustable rocker arms may be necessary.

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/

Cam # Range Lift Dur. .050 Lap Hot Center OEM #
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-590-S 1500-4000 Int .399 276 187 62 Hyd. 106 HL-1951
Exh .401 290 200 112 400084

Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-908-P 2200-5400 Int .474 329 232 103 Hyd. 107 HL-1951
Exh .474 329 232 119 402194

Use Elgin Remedy ZDDP-4 with your cams

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 3.

Performance Camshafts
American Motors: 6 Cyl. 199-288 CID (1964-91) 1.5 RAR
Hydraulic Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-1122-P 1500-4000 Int .421 280 208 56 Hyd. 110 HL-2011
Exh .421 280 208 114 CL-1122PK

American Motors: 8 Cyl. 290-401 CID (1966-92) 1.6 RAR

Hydraulic Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-587-S 1500-4000 Int .425 263 196 41 Hyd. 110 HL-2011
Exh .425 263 196 113 CL-587K
E-912-P 1500-4000 Int .449 280 204 65 Hyd. 105 HL-2011
Exh .473 289 214 115 CL-912PK
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-1224-P 2000-4800 Int .472 272 214 70 Hyd. 107 HL-2011
Exh .496 282 224 117 CL-1224PK
E-910-P 2000-4800 Int .477 293 223 65 Hyd. 114 HL-2011
Exh .477 293 223 114 CL-910PK
E-1226-P 2000-4800 Int .497 300 224 73 Hyd. 109 HL-2011
Exh .520 304 234 119 CL-1226PK

Use Elgin Remedy ZDDP-4 with your cams

4. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Performance Camshafts
Buick: 6 Cyl. Even Fire 181-252 CID (1977-90) 1.6 RAR
Hydraulic Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Smooth Stock Idle. Best Fuel Economy Cam. Good Choice for Heavy Towing.
Spring Pressures - 95 lbs. On Seat - 240 lbs. Open
E-1123-P 1000-3200 Int .413 259 190 41 Hyd. 112 HL-1969
Exh .437 271 202 112 CL-1123PK
E-915-P 1000-3200 Int .424 272 194 48 Hyd. 109 HL-1969
Exh .449 280 204 119 CL-915PK
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-1124-P 1500-4000 Int .448 281 208 59 Hyd. 110 HL-1969
Exh .448 281 208 112 CL-1124PK
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-998-P 2000-4800 Int .472 280 214 61 Hyd. 107 HL-1969
Exh .496 290 224 117 CL-998PK
E-914-P 2000-4800 Int .496 290 224 76 Hyd. 107 HL-1969
Exh .496 290 224 117 CL-914PK
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-1063-P 2200-5400 Int .520 306 234 87 Hyd. 107 HL-1969
Exh .542 316 244 117 CL-1063PK

Cadillac: 8 Cyl. 368-500 CID (1968-84) 1.72 RAR

Hydraulic Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-1084-P 2000-4800 Int .507 280 214 74 Hyd. 112 HL-1969
Exh .525 284 218 112 CL-1084PK

Chevrolet: 4 Cyl. OHV 112 (1.8L) (1982), 122 (2.0L) (1983-91) 1.5 RAR
Hydraulic Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-1098-P 1500-4000 Int .420 270 204 55 Hyd. 105 HL-1969
Exh .443 280 214 115 CL-1098PK

Use Elgin Remedy ZDDP-4 with your cams

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 5.

Performance Camshafts
Chevrolet: 6 Cyl. 194-250 CID (1962-84) 1.75 RAR
Hydraulic Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Smooth Stock Idle. Best Fuel Economy Cam. Good Choice for Heavy Towing.
Spring Pressures - 95 lbs. On Seat - 240 lbs. Open
E-1021-P 1000-3200 Int .464 273 194 57 Hyd. 105 HL-1817
Exh .491 282 204 115 CL-1021PK
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-1026-P 2000-4800 Int .509 308 224 92 Hyd. 113 HL-1817
Exh .509 308 224 103 CL-1026PK

Chevrolet: 6 Cyl. 292 CID (1963-89) 1.75 RAR

Hydraulic Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Smooth Stock Idle. Best Fuel Economy Cam. Good Choice for Heavy Towing.
Spring Pressures - 95 lbs. On Seat - 240 lbs. Open
E-551-S 1000-3200 Int .405 276 188 53 Hyd. 113 HL-1817
Exh .405 276 188 110 CL-551K

Chevrolet: 6 Cyl. 173 (2.8L), 207 (3.4L) (1980-96) 1.5 RAR

Hydraulic Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-865-S 1500-4000 Int .390 258 194 46 Hyd. 109 HL-2095
Exh .410 270 202 109 CL-865K
E-1125-P 1500-4000 Int .420 280 208 60 Hyd. 108 HL-2095
Exh .420 280 208 112 CL-1125PK
E-999-P 1500-4000 Int .421 278 204 59 Hyd. 107 HL-2095
Exh .444 288 214 117 CL-999PK

Use Elgin Remedy ZDDP-4 with your cams

6. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Performance Camshafts
Chevrolet: 6 Cyl. 90° Odd Fire 200-229 CID (1978-84) 1.5 RAR
Hydraulic Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-926-P 1500-4000 Int .421 278 204 56 Hyd. 111 HL-1817
Exh .444 289 214 117 CL-926PK
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-924-P 2000-4800 Int .443 280 214 68 Hyd. 107 HL-1817
Exh .465 290 224 117 CL-924PK

Solid Flat Tappet Camshafts

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-925-P 2200-5400 Int .480 300 238 76 .022 107 VT-1992
Exh .480 300 238 .022 117 CL-925PK
E-1003-P 2200-5400 Int .503 310 248 91 .022 107 VT-1992
Exh .525 320 258 .022 117 CL-1003PK

Chevrolet: 6 Cyl. 90° Even Fire 262 CID (1985-94) 1.5 RAR
Hydraulic Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-1016-P 1500-4000 Int .404 269 202 45 Hyd. 110 HL-1817
Exh .414 271 207 114 CL-1016PK
E-1032-P 1500-4000 Int .410 271 203 54 Hyd. 111 HL-1817
Exh .410 285 214 115 CL-1032PK

Chevrolet: 6 Cyl. 90° Even Fire 262 CID (1985-94) 1.5 RAR
Hydraulic Roller Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-1033-P 1500-4000 Int .404 270 202 55 RLR 108 HL-2148
Exh .410 284 213 116 CL-1033PK
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-1205-P 2000-4800 Int .478 273 210 51 RLR 107 HL-2148
Exh .487 277 214 117 CL-1205PK

Use Elgin Remedy ZDDP-4 with your cams

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 7.

Performance Camshafts
Chevrolet Small Block: 8 Cyl. 262-400 CID (1955-02) 1.5 RAR
All Small Block Chevrolet camshafts may be used in the ‘55-56 engines if late model cam bearings are used. Camshafts for the
265 engine must be modified by machining a slot in the rear journal .427” wide and .225”-.235” deep.

Hydraulic Flat Tappet Camshafts

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Smooth Stock Idle. Best Fuel Economy Cam. Good Choice for Heavy Towing.
Spring Pressures - 95 lbs. On Seat - 240 lbs. Open
E-1100-P 1000-3200 Int .368 260 184 58 Hyd. 104 HL-1817
Exh .398 270 194 104 CL-1100PK
E-1005-P 1000-3200 Int .398 270 194 50 Hyd. 107 HL-1817
Exh .420 278 204 117 CL-1005PK
E-1101-P 1000-3200 Int .398 260 194 57 Hyd. 104 HL-1817
Exh .420 270 204 104 CL-1101PK
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-1127-P 1500-4000 Int .387 258 190 40 Hyd. 108 HL-1817
Exh .410 269 202 116 CL-1127PK
E-860-S 1500-4000 Int .404 269 202 40 Hyd. 115 HL-1817
Exh .414 271 207 114 CL-860K
E-919-P 1500-4000 Int .408 280 208 60 Hyd. 107 HL-1817
Exh .408 280 208 113 CL-919PK
E-1128-P 1500-4000 Int .420 280 208 58 Hyd. 106 HL-1817
Exh .420 280 208 116 CL-1128PK
E-923-P 1500-4000 Int .421 278 204 59 Hyd. 107 HL-1817
ICE200923 (Black Ice) Exh .444 288 214 117 CL-923PK
E-1105-P 1500-4000 Int .420 270 204 63 Hyd. 110 HL-1817
Exh .443 280 214 110 CL-1105PK
E-1787-P 1500-4000 Int .428 260 204 41 Hyd. 105 HL-1817
Exh .428 260 204 115 CL-1787PK
E-1120-P 1500-4000 Int .435 283 209 61 Hyd. 107 HL-1817
Exh .455 286 216 117 CL-1120PK
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-1129-P 2000-4800 Int .429 295 218 75 Hyd. 108 HL-1817
Exh .429 295 218 112 CL-1129PK
E-1258-P 2000-4800 Int .435 282 212 Hyd. 110 HL-1817
Exh .460 287 224 116 CL-1258PK
E-1028-P 2000-4800 Int .437 300 224 84 Hyd. 107 HL-1817
Exh .437 300 224 109 CL-1028PK
E-1029-P 2000-4800 Int .443 280 214 63 Hyd. 107 HL-1817
Exh .443 280 214 117 CL-1029PK
E-1069-P 2000-4800 Int .443 280 214 68 Hyd. 105 HL-1817
Exh .443 280 214 115 CL-1069PK
E-922-P 2000-4800 Int .444 288 214 69 Hyd. 107 HL-1817
ICE200922 (Black Ice) Exh .466 298 224 117 CL-922PK
E-1121-P 2000-4800 Int .443 280 214 61 Hyd. 100 HL-1817
Exh .465 290 224 124 CL-1121PK
E-903-P 2000-4800 Int .447 290 223 62 Hyd. 110 HL-1817
ICE200903 (Black Ice) Exh .447 290 223 118 CL-903PK
E-1785-P 2000-4800 Int .450 274 218 62 Hyd. 102 HL-1817
Exh .450 274 218 110 CL-1785PK

Use Elgin Remedy ZDDP-4 with your cams

8. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Performance Camshafts
Chevrolet Small Block: 8 Cyl. 262-400 CID (1955-02) 1.5 RAR
Hydraulic Flat Tappet Camshafts (continued)
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-921-P 2000-4800 Int .450 292 224 59 Hyd. 114 HL-1817
Exh .460 288 224 114 CL-921PK
E-1166-P 2000-4800 Int 453 282 216 64 Hyd. 112
Exh 479 294 228 112
E-1186-P 2000-4800 Int .453 282 216 64 Hyd. 107 HL-1817
Exh .479 294 228 117 CL-1186PK
E-1065-P 2000-4800 Int .458 284 218 64 Hyd. 105 HL-1817
ICE201065 (Black Ice) Exh .458 284 218 115 CL-1065PK
E-1019-P 2000-4800 Int .465 290 224 66 Hyd. 107 HL-1817
Exh .465 290 224 117 CL-1019PK
E-1015-P 2000-4800 Int .465 290 224 76 Hyd. 107 HL-1817
ICE201015 (Black Ice) Exh .488 300 234 117 CL-1015PK
E-1179-P 2000-4800 Int .466 298 224 70 Hyd. 109 HL-1817
Exh .466 298 224 119 CL-1179PK
E-1788-P 2000-4800 Int .467 280 222 60 Hyd. 105 HL-1817
Exh .467 280 222 115 CL-1788PK
E-1211-P 2000-4800 Int .466 298 224 72 Hyd. 109 HL-1817
Exh .488 304 234 119 CL-1211PK
E-1842-P 2000-4800 Int .480 283 224 67 Hyd. 107 HL-1817
Exh .486 291 230 113 CL-1842PK
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-1227-P 2200-5400 Int .450 282 232 Hyd. 106 HL-1817
Exh .450 282 232 106 CL-1227PK
E-916-P 2200-5400 Int .453 284 230 76 Hyd. 112 HL-1817
Exh .453 284 230 116 CL-916PK
E-1852-P 2200-5400 Int .460 303 232 76 Hyd. 109 HL-1817
Exh .460 303 232 119 CL-1852PK
E-1846-P 2200-5400 Int .465 285 230 73 Hyd. 102 HL-1817
Exh .465 285 230 110 CL-1846PK
E-1130-P 2200-5400 Int .468 304 220 80 Hyd. 106 HL-1817
Exh .480 287 231 114 CL-1130PK
E-1784-P 2200-5400 Int .480 284 228 60 Hyd. 107 HL-1817
Exh .480 284 228 117 CL-1784PK
E-920-P 2200-5400 Int .480 288 232 72 Hyd. 106 HL-1817
ICE200920 (Black Ice) Exh .480 288 232 110 CL-920PK
E-1011-P 2200-5400 Int .488 292 232 80 Hyd. 106 HL-1817
Exh .488 300 234 110 CL-1011PK
E-1180-P 2200-5400 Int .488 303 234 75 Hyd. 109 HL-1817
Exh .488 303 234 119 CL-1180PK
E-1212-P 2200-5400 Int .487 303 234 11 Hyd. 109 HL-1817
Exh .508 313 244 119 CL-1212PK
E-1165-P 2200-5400 Int .488 303 234 96 Hyd. 106
Exh .508 313 244 106
E-1067-P 2200-5400 Int .488 300 234 84 Hyd. 107 HL-1817
ICE201067 (Black Ice) Exh .510 310 244 117 CL-1067PK

Use Elgin Remedy ZDDP-4 with your cams

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 9.

Performance Camshafts
Chevrolet Small Block: 8 Cyl. 262-400 CID (1955-02) 1.5 RAR
Hydraulic Flat Tappet Camshafts (continued)
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Oval Track & Bracket Race Cams - Rough Idle with Heavy Lope. Competition Engine Modifications & High
Stall Converter Required. Compression 10.5:1 or 12:1. Spring Pressures - 125 lbs. On Seat - 325 lbs. Open
E-1132-P 3200-6500 Int .434 312 244 96 Hyd. 107 HL-1817
Exh .434 312 244 110 CL-1132PK
E-1786-P 3200-6500 Int .500 302 246 90 Hyd. 102 HL-1817
ICE201786 (Black Ice) Exh .500 302 246 110 CL-1786PK
E-1024-P 3200-6500 Int .508 302 246 84 Hyd. 106 HL-1817
ICE201024 (Black Ice) Exh .508 302 246 112 CL-1024PK
E-1213-P 3200-6500 Int .508 313 244 95 Hyd. 109 HL-1817
Exh .533 328 254 119 CL-1213PK
E-1006-P 3200-6500 Int .510 310 244 99 Hyd. 107 HL-1817
Exh .533 320 254 117 CL-1006PK
E-1214-P 3200-6500 Int .537 312 254 89 Hyd. 109 HL-1817
Exh .559 322 264 119 CL-1214PK

Solid Flat Tappet Camshafts

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-900-P 2000-4800 Int .395 287 228 66 .012 108 VT-1992
Exh .401 287 230 .018 112 CL-900PK
E-1187-P 2000-4800 Int .456 258 219 36 .022 110 VT-1992
Exh .479 270 229 .022 118 CL-1187PK
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-918-P 2200-5400 Int .446 294 239 57 .018 109 VT-1992
Exh .446 294 239 .018 118 CL-918PK
E-904-P 2200-5400 Int .459 295 242 67 .020 110 VT-1992
Exh .485 308 254 .025 122 CL-904PK
E-1133-P 2200-5400 Int .498 280 246 64 .030 106 VT-1992
Exh .498 280 246 .030 110 CL-1133PK
E-1200-P 2200-5400 Int .507 283 249 71 .030 102 VT-1992
Exh .507 283 249 .030 110 CL-1200PK
E-1131-P 2200-5400 Int .521 282 240 75 .024 104 VT-1992
Exh .521 290 250 .024 108 CL-1131PK
E-1243-P 2200-5400 Int .531 282 248 38 .016 103 VT-1992
ICE201243 (Black Ice) Exh .542 286 251 .016 109 CL-1243PK
Oval Track & Bracket Race Cams - Rough Idle with Heavy Lope. Competition Engine Modifications & High
Stall Converter Required. Compression 10.5:1 or 12:1. Spring Pressures - 125 lbs. On Seat - 325 lbs. Open
E-901-P 3200-6500 Int .485 314 254 86 .030 110 VT-1992
Same as GM #3849346 Exh .485 314 254 .030 118 CL-901PK
E-902-P 3200-6500 Int .494 304 257 89 .022 108 VT-1992
Same as GM #3927140 Exh .512 320 270 .024 116 CL-902PK
E-1844-P 3200-6500 Int .496 289 244 80 .022 102 VT-1992
Exh .516 299 254 .022 110 CL-1844PK

Use Elgin Remedy ZDDP-4 with your cams

10. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Performance Camshafts
Chevrolet Small Block: 8 Cyl. 262-400 CID (1955-02) 1.5 RAR
Solid Flat Tappet Camshafts (continued)
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Oval Track & Bracket Race Cams - Rough Idle with Heavy Lope. Competition Engine Modifications & High
Stall Converter Required. Compression 10.5:1 or 12:1. Spring Pressures - 125 lbs. On Seat - 325 lbs. Open
E-1091-P 3200-6500 Int .504 287 256 81 .026 99 VT-1992
Uses 1.5 Int./Exh. Exh .504 295 264 .026 111 CL-1091PK
ICE201091 (Black Ice)
E-1091-P 3200-6500 Int .538 290 256 84 .026 99 VT-1992
Uses 1.6 Int./Exh. Exh .538 298 264 .026 111 CL-1091PK
ICE201091 (Black Ice)
E-1091-P 3200-6500 Int .504 287 256 81 .026 99 VT-1992
Uses 1.5 Int./1.6 Exh. Exh .538 298 264 .026 111 CL-1091PK
ICE201091 (Black Ice)
E-1091-P 3200-6500 Int .538 290 256 84 .026 99 VT-1992
Uses 1.6 Int./1.5 Exh. Exh .504 295 264 .026 111 CL-1091PK
ICE201091 (Black Ice)
E-917-P 3200-6500 Int .512 309 262 90 .022 108 VT-1992
Exh .536 318 273 .024 116 CL-917PK
E-1843-P 3200-6500 Int .516 299 254 93 .022 102 VT-1992
Exh .538 309 264 .022 110 CL-1843PK
E-1190-P 3200-6500 Int .517 319 278 95 .030 107 VT-1992
Exh .517 319 278 .030 117 CL-1190PK
E-1195-P 3200-6500 Int .533 283 250 75 .026 102 VT-1992
Exh .556 290 260 .028 110 CL-1195PK
E-1196-P 3200-6500 Int .536 296 252 92 .016 104 VT-1992
Exh .526 312 266 .016 108 CL-1196PK
E-1175-P 3200-6500 Int .538 290 258 84 .026 99 VT-1992
Exh .556 298 266 .026 111 CL-1175PK
E-1090-P 3200-6500 Int .537 287 256 81 .026 99 VT-1992
Uses 1.5 Int./Exh. Exh .557 295 264 .026 111 CL-1090PK
ICE201090 (Black Ice)
E-1090-P 3200-6500 Int .573 290 256 84 .026 99 VT-1992
Uses 1.6 Int./Exh. Exh .594 298 264 .026 111 CL-1090PK
ICE201090 (Black Ice)
E-1090-P 3200-6500 Int .537 287 256 81 .026 99 VT-1992
Uses 1.5 Int./1.6 Exh. Exh .594 298 264 .026 111 CL-1090PK
ICE201090 (Black Ice)
E-1090-P 3200-6500 Int .573 290 256 84 .026 99 VT-1992
Uses 1.6 Int./1.5 Exh. Exh .557 295 264 .026 111 CL-1090PK
ICE201090 (Black Ice)

Tech Tip: Calculating Lobe Separation Angle (LSA)

To calculate the lobe separation angle of a cam,
simply add the intake and exhaust centerlines together and then divide that total by two.

To calculate how many degrees of advance are built into a cam profile,
Example: Take the E-1090-P camshaft. simply subtract the intake centerline from the lobe separation angle.
The intake centerline is 99 and the exhaust is 111. Using the same example:
99 + 111 = 210 210 / 2 = 105 105 – 99 = 6
105 is the lobe separation angle. There is 6 degrees of advance built into this cam
when installed straight up (dot to dot).

Using this information can increase your chances of properly dialing in your camshaft to fit your specific needs.

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 11.

Performance Camshafts
Chevrolet Small Block: 8 Cyl. 262-400 CID (1955-02) 1.5 RAR
Solid Flat Tappet Camshafts (continued)
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Oval Track & Bracket Race Cams - Rough Idle with Heavy Lope. Competition Engine Modifications & High
Stall Converter Required. Compression 10.5:1 or 12:1. Spring Pressures - 125 lbs. On Seat - 325 lbs. Open
E-1173-P* 3200-6500 Int .537 287 256 81 .026 99 VT-1992
Uses 1.5 Int./Exh. Exh .557 295 264 .026 111 CL-1173PK
ICE201173 (Black Ice)
E-1173-P* 3200-6500 Int .573 290 256 84 .026 99 VT-1992
Uses 1.6 Int./Exh. Exh .594 298 264 .026 111 CL-1173PK
ICE201173 (Black Ice)
E-1173-P* 3200-6500 Int .537 287 256 81 .026 99 VT-1992
Uses 1.5 Int./1.6 Exh. Exh .594 298 264 .026 111 CL-1173PK
ICE201173 (Black Ice)
E-1173-P* 3200-6500 Int .573 290 256 84 .026 99 VT-1992
Uses 1.6 Int./1.5 Exh. Exh .557 295 264 .026 111 CL-1173PK
ICE201173 (Black Ice)
E-1241-P 3200-6500 Int .537 288 255 47 .026 102 VT-1992
Exh .556 296 263 .028 110 CL-1241PK
E-1845-P 3200-6500 Int .538 309 264 98 .022 104 VT-1992
Exh .563 319 274 .022 112 CL-1845PK
E-1242-P 3200-6500 Int .543 291 252 49 .016 100 VT-1992
Exh .553 295 255 .016 104 CL-1242PK
E-1194-P 3200-6500 Int .547 289 256 84 .026 98 VT-1992
Exh .566 299 265 .026 112 CL-1194PK
E-1201-P 3200-6500 Int .552 296 257 94 .016 101 VT-1992
Exh .563 300 260 .016 103 CL-1201PK
E-1240-P 3200-6500 Int .563 298 259 91 .018 102 VT-1992
Exh .583 304 269 .020 110 CL-1240PK
E-1025-P 3200-6500 Int .579 312 274 92 .022 106 VT-1992
Exh .579 312 274 .022 114 CL-1025PK
* Small Base Circle E-1090-P

Retro-Fit Hydraulic Roller Camshafts

For Use in Early Engine Blocks With Standard Hydraulic Cams.

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/

Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-1230-P 1500-4000 Int .435 273 198 RLR 108 HL-4001S
Exh .462 288 210 116 N/A
E-1231-P 1500-4000 Int .457 275 202 RLR 100 HL-4001S
Exh .457 275 202 108 N/A
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-1232-P 2000-4800 Int .462 288 210 RLR 106 HL-4001S
Exh .470 284 215 114 N/A

Use Elgin Remedy ZDDP-4 with your cams

12. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Performance Camshafts
Chevrolet: 8 Cyl. 305 (5.0L), 350 (5.7L) (1987-05) 1.5 RAR
These camshafts can be used in 1987-94 LT1 & LT4 engines by pressing dowel pin into camshaft until .300” protrusion is obtained.
The .500” diameter hole will not cause a problem.

Hydraulic Roller Camshafts

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-1191-P 1500-4000 Int .434 273 198 57 RLR 108 HL-2148
Exh .462 288 210 116 CL-1191PK
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-1193-P 2000-4800 Int .462 288 210 68 RLR 106 HL-2148
Exh .469 284 215 114 CL-1193PK
E-1869-P 2000-4800 Int .478 297 222 75 RLR 109 HL-2148
Exh .501 307 232 119 CL-1869PK
E-1247-P 2000-4800 Int .492 279 218 60 RLR 109 HL-2148
Exh .492 288 228 115 CL-1247PK
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-1192-P 2200-5400 Int .480 306 230 90 RLR 106 HL-2148
Exh .480 306 230 110 CL-1192PK
E-1248-P 2200-5400 Int .539 303 234 78 RLR 110 HL-2148
Exh .547 309 238 118 CL-1248PK

Chevrolet: 8 Cyl. 305 (5.0L), 350 (5.7L) (1987-94) 1.5 RAR

Use with new style thrust plate for cam retention.

Hydraulic Roller Camshafts

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-1134-P 1500-4000 Int .435 273 198 57 RLR 108 HL-2148
Exh .462 288 210 116 CL-1134PK
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-1872-P 2000-4800 Int .444 288 214 69 RLR 107 HL-2148
Exh .467 298 224 117 CL-1872PK
E-1136-P 2000-4800 Int .462 288 210 68 RLR 106 HL-2148
Exh .470 284 215 114 CL-1136PK
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-1135-P 2200-5400 Int .480 306 230 90 RLR 106 HL-2148
Exh .480 306 230 110 CL-1135PK
E-1229-P 2200-5400 Int .538 296 234 74 RLR 107 HL-2148
Exh .546 300 238 117 CL-1229PK

Use Elgin Remedy ZDDP-4 with your cams

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 13.

Performance Camshafts
Chevrolet/GMC: 8 Cyl. LS Engines (1997 and up) 1.7 RAR
Hydraulic Roller Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-1256-P 1500-4000 Int .515 262 206 RLR 110
Exh .522 268 212 114
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-1257-P 2000-4800 Int .522 274 212 RLR 112
Exh .529 280 218 116
E-1251-P 2000-4800 Int .523 278 218 RLR 109
Same as GM #88958753 Exh .524 287 227 115
E-1838-P 2000-4800 Int .560 285 216 59 RLR 110 HL-2148
Exh .560 292 220 118 CL-1838PK
E-1261-P 2000-4800 Int .566 291 223 63 RLR 110 HL-2148
Exh .566 291 223 118 CL-1261PK
E-1839-P 2000-4800 Int .575 286 220 62 RLR 108 HL-2148
ICE201839 (Black Ice) Exh .575 282 224 116 CL-1839PK
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-1250-P 2200-5400 Int .525 289 225 RLR 107
Same as GM #88958770 Exh .525 300 236 113
E-1254-P 2200-5400 Int .551 290 227 RLR 107
Same as GM #88958772 Exh .551 305 239 109
E-1840-P* 2200-5400 Int .585 283 228 59 RLR 108 HL-2148
ICE201840 (Black Ice) Exh .585 286 230 116 CL-1840PK
E-1841-P 2200-5400 Int .595 296 238 73 RLR 108 HL-2148
Exh .595 299 242 116 CL-1841PK
E-1252-P 2200-5400 Int .612 298 236 RLR 110
Same as GM #19166972 Exh .612 309 246 110
Oval Track & Bracket Race Cams - Rough Idle with Heavy Lope. Competition Engine Modifications & High
Stall Converter Required. Compression 10.5:1 or 12:1. Spring Pressures - 125 lbs. On Seat - 325 lbs. Open
E-1253-P 3200-6500 Int .569 299 240 RLR 106
Same as GM #88958766 Exh .569 311 252 106
E-1255-P 3200-6500 Int .595 295 234 RLR 108
Same as GM #88958773 Exh .595 336 277 106
* Sloppy Stage 2 Cam
Mechanical Roller Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
E-1260-P** 3200-6500 Int .743 308 253 .020 108
Same as GM #19166975 Exh .743 321 270 .020 108
** Specs shown are with 1.9:1 ratio rocker arms

Use Elgin Remedy ZDDP-4 with your cams

14. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Performance Camshafts
Chevrolet Big Block: 8 Cyl. 366-454 CID (1965-00) 1.7 RAR
When installing the following camshafts in the 1991 and later 454 “L19” V8 Engine with a “NET BUILD LASH” non-adjustable
valvetrain, it may be necessary to convert to an adjustable valvetrain by using Pre-’91 valve components. The 1965-66 396 engines did
not have an oil groove in the rear cam bearing bore. When using the camshafts below in these engines, it is necessary to machine a
3/16” wide x 7/64” deep groove in the center of the rear cam journal or the I.D. of the rear cam bearing.

Hydraulic Flat Tappet Camshafts

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-574-S 1500-4000 Int .398 271 196 44 Hyd. 110 HL-1817
Exh .398 271 196 117 CL-574K
E-1138-P 1500-4000 Int .398 271 192 53 Hyd. 107 HL-1817
ICE201138 (Black Ice) Exh .430 281 203 117 CL-1138PK
E-1176-P 1500-4000 Int .459 288 204 68 Hyd. 108 HL-1817
Exh .459 298 208 116 CL-1176PK
E-1139-P 1500-4000 Int .477 284 208 62 Hyd. 107 HL-1817
Exh .477 284 208 115 CL-1139PK
E-1219-P 1500-4000 Int .475 276 208 54 Hyd. 107 HL-1817
Exh .500 280 218 117 CL-1219PK
E-931-P 1500-4000 Int .477 282 204 64 Hyd. 108 HL-1817
Exh .503 292 214 116 CL-931PK
E-1795-P 1500-4000 Int .484 263 204 43 Hyd. 105 HL-1817
Exh .484 263 204 115 CL-1795PK
E-1851-P 1500-4000 Int .499 266 210 46 Hyd. 105 HL-1817
Exh .499 266 210 115 CL-1851PK
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-928-P 2000-4800 Int .500 310 222 81 Hyd. 110 HL-1817
Exh .505 325 235 120 CL-928PK
E-1206-P 2000-4800 Int .502 277 218 53 Hyd. 109 HL-1817
Exh .501 287 228 119 CL-1206PK
E-930-P 2000-4800 Int .503 292 214 72 Hyd. 108 HL-1817
Exh .528 302 224 116 CL-930PK
E-1064-P 2000-4800 Int .510 294 224 63 Hyd. 114 HL-1817
Exh .510 294 224 117 CL-1064PK
E-1066-P 2000-4800 Int .516 294 218 74 Hyd. 105 HL-1817
Exh .516 294 218 115 CL-1066PK
E-1850-P 2000-4800 Int .518 296 218 75 Hyd. 105 HL-1817
Exh .518 296 218 115 CL-1850PK

Use Elgin Remedy ZDDP-4 with your cams

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 15.

Performance Camshafts
Chevrolet Big Block: 8 Cyl. 366-454 CID (1965-00) 1.7 RAR
Hydraulic Flat Tappet Camshafts (continued)
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-1796-P 2200-5400 Int .514 309 226 93 Hyd. 106 HL-1817
Exh .514 309 226 110 CL-1796PK
E-1070-P 2200-5400 Int .527 290 224 76 Hyd. 110 HL-1817
Exh .553 292 234 118 CL-1070PK
E-1116-P 2200-5400 Int .530 316 229 82 Hyd. 109 HL-1817
Exh .551 314 236 119 CL-1116PK
E-1215-P 2200-5400 Int .539 292 228 70 Hyd. 109 HL-1817
Exh .539 304 238 119 CL-1215PK
E-1797-P 2200-5400 Int .544 287 228 63 Hyd. 107 HL-1817
Exh .544 287 228 117 CL-1797PK
E-929-P 2200-5400 Int .544 292 230 74 Hyd. 107 HL-1817
Exh .544 292 230 111 CL-929PK
E-1849-P 2200-5400 Int .552 312 234 92 Hyd. 107 HL-1817
Exh .577 322 244 117 CL-1849PK
E-1007-P 2200-5400 Int .553 300 234 81 Hyd. 107 HL-1817
Exh .578 310 244 117 CL-1007PK
Oval Track & Bracket Race Cams - Rough Idle with Heavy Lope. Competition Engine Modifications & High
Stall Converter Required. Compression 10.5:1 or 12:1. Spring Pressures - 125 lbs. On Seat - 325 lbs. Open
E-1218-P 3200-6500 Int .540 304 238 82 Hyd. 109 HL-1817
ICE201218 (Black Ice) Exh .540 316 248 119 CL-1218PK
E-1207-P 3200-6500 Int .559 305 240 85 Hyd. 110 HL-1817
Exh .572 311 246 114 CL-1207PK
E-1143-P 3200-6500 Int .576 304 246 84 Hyd. 106 HL-1817
Exh .576 304 246 114 CL-1143PK
E-1142-P 3200-6500 Int .578 310 244 105 Hyd. 105 HL-1817
Exh .603 320 254 115 CL-1142PK

Solid Flat Tappet Camshafts

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-905-P 2200-5400 Int .520 310 242 75 .020 108 VT-1992
Exh .520 297 242 .024 120 CL-905PK

Use Elgin Remedy ZDDP-4 with your cams

16. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Performance Camshafts
Chevrolet Big Block: 8 Cyl. 366-454 CID (1965-00) 1.7 RAR
Solid Flat Tappet Camshafts (continued)
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Oval Track & Bracket Race Cams - Rough Idle with Heavy Lope. Competition Engine Modifications & High
Stall Converter Required. Compression 10.5:1 or 12:1. Spring Pressures - 125 lbs. On Seat - 325 lbs. Open
E-1171-P 3200-6500 Int .555 294 255 77 .022 106 VT-1992
Exh .551 301 263 .022 114 CL-1171PK
E-906-P 3200-6500 Int .559 342 264 96 .022 108 VT-1992
Exh .580 333 270 .026 116 CL-906PK
E-1144-P 3200-6500 Int .576 301 250 81 .022 108 VT-1992
Exh .639 304 261 .026 116 CL-1144PK
E-1848-P 3200-6500 Int .584 302 254 87 .026 104 VT-1992
Exh .609 312 264 .026 112 CL-1848PK

Retro-Fit Hydraulic Roller Camshafts

For Use in Early Engine Blocks With Standard Hydraulic Cams.

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/

Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-1234-P 2000-4800 Int .501 288 216 RLR 108 HL-4003S
Exh .510 300 228 116 N/A
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-1235-P 2200-5400 Int .527 296 224 RLR 106 HL-4003S
Exh .544 308 234 114 N/A
E-1236-P 2200-5400 Int .561 316 236 RLR 106 HL-4003S
Exh .578 324 246 114 N/A
E-1237-P 2200-5400 Int .625 335 237 RLR 109 HL-4003S
Exh .639 329 245 115 N/A
Oval Track & Bracket Race Cams - Rough Idle with Heavy Lope. Competition Engine Modifications & High
Stall Converter Required. Compression 10.5:1 or 12:1. Spring Pressures - 125 lbs. On Seat - 325 lbs. Open
E-1238-P 3200-6500 Int .559 305 241 RLR 110 HL-4003S
Exh .572 310 246 114 N/A

Don’t forget the good stuff!

EPL-4

Use Elgin Remedy ZDDP-4 with your cams

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 17.

Performance Camshafts
Chevrolet: 8 Cyl. 454 (7.4L) (1996-00) 1.7 RAR
Hydraulic Roller Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-1197-P 2200-5400 Int .502 288 216 70 RLR 108 HL-7003
Exh .510 300 228 116 CL-1197PK
Oval Track & Bracket Race Cams - Rough Idle with Heavy Lope. Competition Engine Modifications & High
Stall Converter Required. Compression 10.5:1 or 12:1. Spring Pressures - 125 lbs. On Seat - 325 lbs. Open
E-1870-P 3200-6500 Int .632 319 247 98 RLR 109 HL-7003
Exh .649 326 258 114 CL-1870PK

Chevrolet/GMC: 8 Cyl. 496 (8.1L) (2001 and up) 1.7 RAR

Hydraulic Roller Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-1259-P 2000-4800 Int .515 209 RLR. 114 HL-7003
Exh .508 217 114 CL-1259PK

Look to Elgin for more Medium & Heavy Duty gas and diesel
engine parts, including Ford 6.0L, 6.4L and 6.7L diesel engines,
GM 6.6L Duramax, Cummins ISB/ISX and much more.

Use Elgin Remedy ZDDP-4 with your cams

18. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Performance Camshafts
Chrysler: 4 Cyl. 135 (2.2L), 153 (2.5L) (1981-87) 1.5 RAR
Hydraulic Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-1037-P 1500-4000 Int .430 232 206 20 Hyd. 110 HL-2105
Exh .430 248 220 110 CL-1037PK

Chrysler: 8 Cyl. 273-318 CID (1964-03) 1.5 RAR

Hydraulic Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-938-P 1500-4000 Int .421 280 208 58 Hyd. 107 HL-2011
Exh .421 280 208 115 CL-938PK
E-937-P 1500-4000 Int .421 278 204 59 Hyd. 108 HL-2011
Exh .444 288 214 116 CL-937PK
E-578-S 1500-4000 Int .429 279 209 50 Hyd. 112 HL-2011
Exh .444 289 220 116 CL-578K
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-1223-P 2000-4800 Int .441 276 218 54 Hyd. 109 HL-2011
Exh .441 288 228 119 CL-1223PK
E-1087-P 2000-4800 Int .443 280 214 60 Hyd. 106 HL-2011
Exh .443 280 214 114 CL-1087PK
E-936-P 2000-4800 Int .444 288 214 69 Hyd. 108 HL-2011
Exh .466 298 224 116 CL-936PK
E-1858-P 2000-4800 Int .448 290 222 87 Hyd. 107 HL-2011
Exh .448 319 232 117 CL-1858PK
E-934-P 2000-4800 Int .447 291 223 67 Hyd. 107 HL-2011
Exh .447 291 223 117 CL-934PK
E-1789-P 2000-4800 Int .455 272 216 52 Hyd. 105 HL-2011
Exh .455 272 216 115 CL-1789PK
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-933-P 2200-5400 Int .450 298 232 102 Hyd. 107 HL-2011
Exh .476 308 242 117 CL-933PK
E-935-P 2200-5400 Int .480 287 231 69 Hyd. 107 HL-2011
Exh .480 287 231 111 CL-935PK
E-1798-P 2200-5400 Int .480 284 228 61 Hyd. 107 HL-2011
Exh .480 284 228 117 CL-1798PK

Solid Flat Tappet Camshafts

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-985-P 2200-5400 Int .503 310 248 99 .022 103 VT-2084
Exh .525 320 258 .022 113 CL-985PK

Use Elgin Remedy ZDDP-4 with your cams

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 19.

Performance Camshafts
Chrysler: 8 Cyl. 350-440 CID (1958-78) 1.5 RAR
Hydraulic Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-1147-P 1500-4000 Int .421 280 208 58 Hyd. 108 HL-2011
Exh .421 280 208 114 CL-1147PK
E-942-P 1500-4000 Int .421 278 204 60 Hyd. 107 HL-2011
Exh .444 288 214 117 CL-942PK
E-327-S 1500-4000 Int .431 283 208 64 Hyd. 110 HL-2011
Exh .429 296 210 116 CL-327K
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-943-P 2000-4800 Int .444 288 214 69 Hyd. 107 HL-2011
Exh .466 298 224 117 CL-943PK
E-939-P 2000-4800 Int .444 288 218 64 Hyd. 107 HL-2011
Exh .445 288 218 117 CL-939PK
E-1094-P 2000-4800 Int .447 302 213 87 Hyd. 112 HL-2011
Exh .459 324 225 118 CL-1094PK
E-1853-P 2000-4800 Int .454 289 224 64 Hyd. 108 HL-2011
Exh .454 289 224 116 CL-1853PK
E-1222-P 2000-4800 Int .466 298 224 71 Hyd. 109 HL-2011
Exh .488 303 234 119 CL-1222PK
E-1789-P 2000-4800 Int .455 272 216 52 Hyd. 105 HL-2011
Exh .455 272 216 115 CL-1789PK
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-941-P 2200-5400 Int .480 292 230 74 Hyd. 107 HL-2011
Exh .480 292 230 111 CL-941PK
E-1228-P 2200-5400 Int .480 302 236 86 Hyd. 108 HL-2011
Exh .480 302 236 108 CL-1228PK
Oval Track & Bracket Race Cams - Rough Idle with Heavy Lope. Competition Engine Modifications & High
Stall Converter Required. Compression 10.5:1 or 12:1. Spring Pressures - 125 lbs. On Seat - 325 lbs. Open
E-940-P 3200-6500 Int .476 308 242 106 Hyd. 106 HL-2011
Exh .476 308 242 118 CL-940PK
E-1044-P 3200-6500 Int .510 310 244 94 Hyd. 103 HL-2011
Exh .510 310 244 113 CL-1044PK
E-1148-P 3200-6500 Int .521 311 242 98 Hyd. 108 HL-2011
Exh .551 322 253 110 CL-1148PK

Use Elgin Remedy ZDDP-4 with your cams

20. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Performance Camshafts
Ford: 4 Cyl. 98 (1.6L) OHV (1978-80) 1.5 RAR
Solid Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-944-P 2000-4800 Int .393 290 228 74 .010 107 N/A
Exh .393 290 235 .017 109 N/A

Ford: 4 Cyl. 98 (1.6L) CVH (Compound Valve Hemispherical) 1.6 RAR

(1981-85)
Hydraulic Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-848-S 1500-4000 Int .395 269 200 47 Hyd. 108 HL-2102
Exh .395 269 200 114 CL-848K
E-1149-P 1500-4000 Int .404 284 209 62 Hyd. 106 HL-2102
Exh .404 284 209 115 CL-1149PK
E-968-P 1500-4000 Int .465 270 204 41 Hyd. 112 HL-2102
Exh .490 280 214 122 CL-968PK

Ford: 4 Cyl. 122 (2.0L) OHC (1971-74) 1.6 RAR

Solid Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-945-P 2000-4800 Int .418 290 229 64 .011 106 N/A
Exh .418 286 229 .012 96 N/A

Use Elgin Remedy ZDDP-4 with your cams

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 21.

Performance Camshafts
Ford: 6 Cyl. 171 (2.8L) (1983-86) 1.5 RAR
Solid Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-1107-P 1500-4000 Int .438 266 214 46 .022 105 VT-1872
Exh .438 266 214 .022 115 CL-1107PK
E-1108-P 1500-4000 Int .438 266 214 51 .022 105 VT-1872
Exh .438 276 224 .022 115 CL-1108PK

Ford: 6 Cyl. 232 (3.8L) (1982-83) 1.72 RAR

Hydraulic Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Smooth Stock Idle. Best Fuel Economy Cam. Good Choice for Heavy Towing.
Spring Pressures - 95 lbs. On Seat - 240 lbs. Open
E-1030-P 1000-3200 Int .458 260 194 45 Hyd. 105 HL-1900
Exh .484 270 204 115 CL-1030PK
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-1031-P 1500-4000 Int .484 270 204 51 Hyd. 107 HL-1900
Exh .510 280 214 117 CL-1031PK

Ford: 6 Cyl. 240, 300 CID (1965-96) 1.6 RAR

When using the following camshafts in 1987 and later models, the fuel pump eccentric lobe is not used.

Hydraulic Flat Tappet Camshafts

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-1178-P 1500-4000 Int .449 280 204 65 Hyd. 106 HL-1900
Exh .473 289 214 114 CL-1178PK

Use Elgin Remedy ZDDP-4 with your cams

22. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Performance Camshafts
Ford: 8 Cyl. 221-302 CID (Exc. H.O.) (1962-01) 1.6 RAR
(Firing Order 1-5-4-2-6-3-7-8). These cams can be used in the 351W & 302 HO engines by re-wiring the distributor to above
Firing Order.

Hydraulic Flat Tappet Camshafts

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center OEM #
Smooth Stock Idle. Best Fuel Economy Cam. Good Choice for Heavy Towing.
Spring Pressures - 95 lbs. On Seat - 240 lbs. Open
E-560-S 1000-3200 Int .368 293 184 62 Hyd. 114 HL-1900
Exh .380 265 189 104 CL-560K
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-1150-P 1500-4000 Int .413 258 190 45 Hyd. 106 HL-1900
Exh .437 271 202 114 CL-1150PK
E-1799-P 1500-4000 Int .456 261 204 41 Hyd. 105 HL-1900
Exh .456 261 204 115 CL-1799PK
E-951-P 1500-4000 Int .450 280 204 61 Hyd. 108 HL-1900
Exh .474 289 214 116 CL-951PK
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-1856-P 2000-4800 Int .469 265 210 45 Hyd. 105 HL-1900
Exh .469 265 210 115 CL-1856PK
E-1153-P 2000-4800 Int .458 297 218 81 Hyd. 106 HL-1900
Exh .483 307 230 114 CL-1153PK
E-947-P 2000-4800 Int .458 297 218 71 Hyd. 106 HL-1900
Exh .458 297 218 120 CL-947PK
E-1027-P 2000-4800 Int .466 304 224 84 Hyd. 106 HL-1900
Exh .466 304 224 114 CL-1027PK
E-1217-P 2000-4800 Int .470 278 218 56 Hyd. 109 HL-1900
Exh .470 290 228 119 CL-1217PK
E-950-P 2000-4800 Int .473 288 214 69 Hyd. 108 HL-1900
Exh .497 300 224 116 CL-950PK
E-1790-P 2000-4800 Int .485 274 216 54 Hyd. 105 HL-1900
Exh .485 274 216 115 CL-1790PK
E-989-P 2000-4800 Int .496 290 224 78 Hyd. 107 HL-1900
Exh .520 300 234 117 CL-989PK
E-1800-P 2000-4800 Int .498 282 222 62 Hyd. 105 HL-1900
Exh .498 282 222 115 CL-1800PK

Use Elgin Remedy ZDDP-4 with your cams

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 23.

Performance Camshafts
Ford: 8 Cyl. 221-302 CID (Excl. H.O.) (1962-01) 1.6 RAR
Hydraulic Flat Tappet Camshafts (continued)
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-1791-P 2200-5400 Int .512 284 228 62 Hyd. 107 HL-1900
Exh .512 284 228 117 CL-1791PK
E-949-P 2200-5400 Int .512 288 231 68 Hyd. 106 HL-1900
Exh .512 288 231 114 CL-949PK
E-1216-P 2200-5400 Int .520 304 234 81 Hyd. 109 HL-1900
Exh .542 314 244 119 CL-1216PK

Solid Flat Tappet Camshafts

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-811-S 2000-4800 Int .477 310 228 82 .018 108 VT-2000
Exh .477 310 228 .018 120 CL-811K
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-952-P 2200-5400 Int .512 298 238 79 .025 107 VT-2000
Exh .536 308 248 .025 117 CL-952PK
Oval Track & Bracket Race Cams - Rough Idle with Heavy Lope. Competition Engine Modifications & High
Stall Converter Required. Compression 10.5:1 or 12:1. Spring Pressures - 125 lbs. On Seat - 325 lbs. Open
E-948-P 3200-6500 Int .528 318 251 85 .020 102 VT-2000
Exh .528 320 252 .020 112 CL-948PK
E-990-P 3200-6500 Int .536 310 248 99 .024 103 VT-2000
Exh .560 320 258 .024 113 CL-990PK
E-1053-P 3200-6500 Int .571 314 254 102 .024 102 VT-2000
Exh .571 314 254 .024 110 CL-1053PK

Use Elgin Remedy ZDDP-4 with your cams

24. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Performance Camshafts
Ford: 8 Cyl. 302 H.O. (1985-95) 351W (1994-97) 1.6 RAR
Specifically designed to be used in engines originally produced using roller tappets. Use the 351W Firing Order 1-3-7-2-6-5-4-8 when
using in 1985-95 302 HO engines. Can be used in the 1985-89 302 Standard engine by re-wiring the distributor to Firing
Order 1-3-7-2-6-5-4-8. On EFI applications, a mass air induction system must be used.

Hydraulic Roller Camshafts

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-836-S 1500-4000 Int .444 298 210 55 RLR 116 HL-2205
Exh .444 282 211 115 CL-836K
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-1017-P 2000-4800 Int .493 279 212 60 RLR 107 HL-2205
Exh .510 289 222 117 CL-1017PK
E-1164-P 2000-4800 Int .498 285 219 62 RLR 110 HL-2205
Exh .498 285 219 110 CL-1164PK
E-1835-P 2000-4800 Int .499 285 220 67 RLR 108 HL-2205
Exh .510 292 226 116 CL-1835PK
E-1018-P 2000-4800 Int .510 289 222 70 RLR 107 HL-2205
Exh .534 299 232 117 CL-1018PK
E-1239-P 2000-4800 Int .512 286 220 RLR 109 HL-2205
Exh .512 292 223 115 CL-1239PK
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-1866-P 2200-5400 Int .520 298 227 74 RLR 107 HL-2205
Exh .520 302 234 117 CL-1866PK
E-1836-P 2200-5400 Int .542 286 224 62 RLR 108 HL-2205
Exh .563 289 232 116 CL-1836PK
E-1867-P 2200-5400 Int .544 290 230 69 RLR 107 HL-2205
Exh .555 296 236 117 CL-1867PK
E-1868-P 2200-5400 Int .573 299 235 77 RLR 107 HL-2205
Exh .583 302 238 117 CL-1868PK
Oval Track & Bracket Race Cams - Rough Idle with Heavy Lope. Competition Engine Modifications & High
Stall Converter Required. Compression 10.5:1 or 12:1. Spring Pressures - 125 lbs. On Seat - 325 lbs. Open
E-1837-P 3200-6500 Int .574 299 236 97 RLR 106 HL-2205
Exh .595 327 248 114 CL-1837PK

Tech Tip
One of the most common questions asked is “What type of distributor
gear do I need to use with this camshaft?” Here’s the answer:
If there were only one rule of thumb for choosing a distributor gear, it
would be to always use a composite gear. Composite is compatible
with every type of camshaft material.
Fortunately there is more than one option. For cast iron cams, a cast
iron distributor gear is recommended. For steel billet cams, bronze
is an option. And for ductile iron cams, the choices are melonized,
hardened steel and again composite.

Use Elgin Remedy ZDDP-4 with your cams

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 25.

Performance Camshafts
Ford: 8 Cyl. 302 H.O. (1982-85) 351W (1969-91) 1.6 RAR
Firing Order 1-3-7-2-6-5-4-8. These cams are used in the 221 thru 302 engines by re-wiring the distributor to above Firing Order.

Hydraulic Flat Tappet Camshafts

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Smooth Stock Idle. Best Fuel Economy Cam. Good Choice for Heavy Towing.
Spring Pressures - 95 lbs. On Seat - 240 lbs. Open
E-1062-P 1000-3200 Int .392 250 184 35 Hyd. 105 HL-1900
Exh .424 260 194 115 CL-1062PK
E-1059-P 1000-3200 Int .424 272 194 56 Hyd. 105 HL-1900
Exh .449 280 204 115 CL-1059PK
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-881-S 1500-4000 Int .416 280 197 60 Hyd. 114 HL-1900
Exh .444 293 209 114 CL-881K
E-959-P 1500-4000 Int .449 280 204 61 Hyd. 107 HL-1900
Exh .473 290 214 117 CL-959PK
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-870-S 2000-4800 Int .445 283 206 60 Hyd. 117 HL-1900
Exh .453 304 221 113 CL-870K
E-958-P 2000-4800 Int .467 308 219 82 Hyd. 107 HL-1900
Exh .467 308 219 119 CL-958PK
E-960-P 2000-4800 Int .473 289 214 70 Hyd. 107 HL-1900
Exh .497 300 224 117 CL-960PK
E-1047-P 2000-4800 Int .488 284 218 64 Hyd. 105 HL-1900
Exh .488 284 218 115 CL-1047PK
E-992-P 2000-4800 Int .496 290 224 78 Hyd. 107 HL-1900
Exh .520 300 234 117 CL-992PK
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-993-P 2200-5400 Int .520 300 234 81 Hyd. 107 HL-1900
Exh .544 310 244 117 CL-993PK

FIND THE PARTS

YOU NEED ONLINE

Use Elgin Remedy ZDDP-4 with your cams

26. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Performance Camshafts
Ford: 8 Cyl. 330-428 CID (1963-78) 1.73 RAR
Hydraulic Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-1159-P 1500-4000 Int .485 284 208 62 Hyd. 103 HL-2083
Exh .485 284 208 119 CL-1159PK
E-966-P 1500-4000 Int .486 282 204 63 Hyd. 104 HL-2083
Exh .512 292 214 120 CL-966PK
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-963-P 2000-4800 Int .506 315 224 91 Hyd. 109 HL-2083
Exh .506 315 224 115 CL-963PK
E-1859-P 2000-4800 Int .516 288 214 47 Hyd. 105 HL-2083
Exh .516 298 224 115 CL-1859PK
E-965-P 2000-4800 Int .512 292 214 73 Hyd. 104 HL-2083
Exh .538 302 224 120 CL-965PK
E-1793-P 2000-4800 Int .533 276 216 56 Hyd. 105 HL-2083
Exh .533 276 216 115 CL-1793PK
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-995-P 2200-5400 Int .540 302 224 75 Hyd. 105 HL-2083
Exh .570 312 234 115 CL-995PK
E-964-P 2200-5400 Int .553 290 231 72 Hyd. 107 HL-2083
Exh .553 290 231 111 CL-964PK

www.elginind.com/catalog

Use Elgin Remedy ZDDP-4 with your cams

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 27.

Performance Camshafts
Ford: 8 Cyl. 351C, 351M, 400 CID (1970-82) 1.73 RAR
Hydraulic Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Smooth Stock Idle. Best Fuel Economy Cam. Good Choice for Heavy Towing.
Spring Pressures - 95 lbs. On Seat - 240 lbs. Open
E-1058-P 1000-3200 Int .458 273 194 57 Hyd. 105 HL-1900
Exh .486 282 204 115 CL-1058PK
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-1155-P 1500-4000 Int .485 284 208 62 Hyd. 107 HL-1900
Exh .485 284 208 115 CL-1155PK
E-953-P 1500-4000 Int .486 282 204 64 Hyd. 106 HL-1900
Exh .512 292 214 118 CL-953PK
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-1156-P 2000-4800 Int .503 308 224 106 Hyd. 104 HL-1900
Exh .507 314 223 112 CL-1156PK
E-907-P 2000-4800 Int .505 310 219 82 Hyd. 108 HL-1900
Exh .505 310 219 120 CL-907PK
E-1862-P 2000-4800 Int .508 266 210 46 Hyd. 105 HL-1900
Exh .508 266 210 115 CL-1862PK
E-1225-P 2000-4800 Int .509 280 218 58 Hyd. 109 HL-1900
Exh .509 292 228 119 CL-1225PK
E-1061-P 2000-4800 Int .510 280 214 60 Hyd. 105 HL-1900
Exh .510 280 214 115 CL-1061PK
E-954-P 2000-4800 Int .512 292 214 72 Hyd. 106 HL-1900
Exh .538 302 224 118 CL-954PK
E-1792-P 2000-4800 Int .524 276 216 56 Hyd. 105 HL-1900
Exh .524 276 216 115 CL-1792PK
E-1049-P 2000-4800 Int .525 295 218 64 Hyd. 105 HL-1900
Exh .525 295 218 115 CL-1049PK
E-997-P 2000-4800 Int .538 302 224 80 Hyd. 107 HL-1900
Exh .562 308 234 117 CL-997PK
E-1801-P 2000-4800 Int .539 284 222 64 Hyd. 105 HL-1900
Exh .539 284 222 115 CL-1801PK
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-1802-P 2200-5400 Int .554 288 228 64 Hyd. 107 HL-1900
Exh .554 288 228 117 CL-1802PK
E-991-P 2200-5400 Int .561 312 234 81 Hyd. 107 HL-1900
Exh .587 322 244 117 CL-991PK

Solid Flat Tappet Camshafts

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-1157-P 2200-5400 Int .569 292 244 82 .026 104 VT-2000
Exh .590 301 254 .026 108 CL-1157PK
Oval Track & Bracket Race Cams - Rough Idle with Heavy Lope. Competition Engine Modifications & High
Stall Converter Required. Compression 10.5:1 or 12:1. Spring Pressures - 125 lbs. On Seat - 325 lbs. Open
E-956-P 3200-6500 Int .657 343 278 127 .025 103 VT-2000
Exh .657 343 278 .025 113 CL-956PK

Use Elgin Remedy ZDDP-4 with your cams

28. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Performance Camshafts
Ford: 8 Cyl. 370-460 CID (1968-99) 1.73 RAR
Hydraulic Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Smooth Stock Idle. Best Fuel Economy Cam. Good Choice for Heavy Towing.
Spring Pressures - 95 lbs. On Seat - 240 lbs. Open
E-996-P 1000-3200 Int .459 268 194 53 Hyd. 105 HL-1900
Exh .484 278 204 115 CL-996PK
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-1160-P 1500-4000 Int .484 284 208 62 Hyd. 105 HL-1900
Exh .484 284 208 117 CL-1160PK
E-967-P 1500-4000 Int .486 282 204 64 Hyd. 107 HL-1900
Exh .512 292 214 117 CL-967PK
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-1586-S 2000-4800 Int .493 308 216 81 Hyd. 109 HL-1900
Exh .502 312 220 120 CL-1586K
E-1220-P 2000-4800 Int .509 278 218 56 Hyd. 109 HL-1900
Exh .509 290 218 119 CL-1220PK
E-1055-P 2000-4800 Int .512 292 214 72 Hyd. 107 HL-1900
Exh .538 302 224 117 CL-1055PK
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-1163-P 2200-5400 Int .522 308 230 88 Hyd. 104 HL-1900
Exh .522 308 230 116 CL-1163PK
E-1162-P 2200-5400 Int .538 303 224 80 Hyd. 107 HL-1900
Exh .562 308 234 117 CL-1162PK
E-1210-P 2200-5400 Int .565 292 234 81 Hyd. 103 HL-1900
Exh .590 303 244 113 CL-1210PK

Solid Flat Tappet Camshafts

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-1140-P 2200-5400 Int .588 294 244 76 .026 107 VT-2000
Exh .614 304 254 .026 117 CL-1140PK

Use Elgin Remedy ZDDP-4 with your cams

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 29.

Performance Camshafts
Oldsmobile: 8 Cyl. 260-455 CID (1967-85) 39° Bank Angle 1.6 RAR
The following camshaft base circles are 0.100” to 0.150” smaller diameter than stock camshafts. Since these engines have
non-adjustable rocker arms, the use of longer push rods or adjustable rocker arms may be necessary.

Hydraulic Flat Tappet Camshafts

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-976-P 1500-4000 Int .448 280 204 61 Hyd. 106 HL-1951
Exh .474 289 214 118 CL-976PK
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-977-P 2000-4800 Int .473 289 214 70 Hyd. 106 HL-1951
Exh .497 300 224 118 CL-977PK
E-1071-P 2000-4800 Int .488 292 218 64 Hyd. 105 HL-1951
Exh .488 292 218 115 CL-1071PK
E-1074-P 2000-4800 Int .496 300 224 83 Hyd. 107 HL-1951
Exh .520 310 234 117 CL-1074PK
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-908-P 2200-5400 Int .474 329 232 103 Hyd. 107 HL-1951
Exh .474 329 232 119 CL-908PK
E-1141-P 2200-5400 Int .520 304 234 86 Hyd. 107 HL-1951
Exh .542 316 244 117 CL-1141PK
Oval Track & Bracket Race Cams - Rough Idle with Heavy Lope. Competition Engine Modifications & High
Stall Converter Required. Compression 10.5:1 or 12:1. Spring Pressures - 125 lbs. On Seat - 325 lbs. Open
E-975-P 3200-6500 Int .475 314 244 94 Hyd. 110 HL-1951
Exh .475 314 244 110 CL-975PK

Pontiac: 4 Cyl. 151 (2.5L) (1979-89) 1.75 RAR

The following cams are designed for use with flat tappets only. Fuel pump eccentric is not used in the 1984-86 151 Engine.

Hydraulic Flat Tappet Camshafts

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Smooth Stock Idle. Best Fuel Economy Cam. Good Choice for Heavy Towing.
Spring Pressures - 95 lbs. On Seat - 240 lbs. Open
E-1154-P 1000-3200 Int .451 261 190 48 Hyd. 109 HL-2077
Exh .478 273 202 113 CL-1154PK
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-1014-P 2000-4800 Int .516 280 214 61 Hyd. 107 HL-2077
Exh .543 290 224 117 CL-1014PK

Use Elgin Remedy ZDDP-4 with your cams

30. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Performance Camshafts
Pontiac: 8 Cyl. 265-455 CID (1955-81) 1.5 RAR
Hydraulic Flat Tappet Camshafts
RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/
Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
RV Cams - Good to Fair Idle. Good Fuel Economy with Correct Equipment. Good for Light Towing.
Spring Pressures - 105 lbs. On Seat - 265 lbs. Open
E-576-S 1500-4000 Int .404 272 198 54 Hyd. 106 HL-1951
Exh .408 280 208 116 CL-576K
E-588-S 1500-4000 Int .404 272 198 54 Hyd. 106 HL-1951
Exh .408 280 208 116 CL-588K
E-979-P 1500-4000 Int .420 278 204 59 Hyd. 108 HL-1951
Exh .443 288 214 116 CL-979PK
Street Performance - Fair Idle with Lope. Good Fuel Economy with Correct Equipment. Stock or Slightly Modified
Engine. Stock or Modified Trans. Compression 10.3:1 or Less. Spring Pressures - 110 lbs. On Seat - 280 lbs. Open
E-909-P 2000-4800 Int .407 298 224 75 Hyd. 112 HL-1951
Exh .407 310 236 119 CL-909PK
E-980-P 2000-4800 Int .443 288 214 69 Hyd. 108 HL-1951
Exh .465 298 224 116 CL-980PK
E-1794-P 2000-4800 Int .454 272 216 52 Hyd. 105 HL-1951
Exh .454 272 216 115 CL-1794PK
E-1221-P 2000-4800 Int .466 298 224 71 Hyd. 109 HL-1951
Exh .488 303 234 119 CL-1221PK
E-1855-P 2000-4800 Int .466 298 224 80 Hyd. 107 HL-1951
Exh .487 308 234 117 CL-1855PK
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-778-S 2200-5400 Int .470 304 231 85 Hyd. 112 HL-1951
Exh .470 316 240 115 CL-778K
E-1034-P 2200-5400 Int .480 287 231 67 Hyd. 106 HL-1951
Exh .480 287 231 114 CL-1034PK
E-1803-P 2200-5400 Int .480 285 228 61 Hyd. 107 HL-1951
Exh .480 285 228 117 CL-1803PK

Solid Flat Tappet Camshafts

This camshaft requires .142” longer push rods when using in place of a hydraulic cam. The VT-1992 has a .142” lower push rod
seat than the HL-1951.

RPM Valve Adv. Dur. @ Over- Lash- Lobe Lifter #/

Cam # Range Lift Dur. .050 Lap Hot Center Cam Lifter Kit
Mild Race Cams - Rough Idle, Low Vacuum. Not for Towing. Engine Modifications & Stall Converter Required.
Compression 10.5:1 or 11:1. Spring Pressures - 120 lbs. On Seat - 300 lbs. Open
E-1076-P 2200-5400 Int .518 305 246 89 .022 103 VT-1992
Exh .518 305 246 .022 113 CL-1076PK

Use Elgin Remedy ZDDP-4 with your cams

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 31.

Marine Camshafts
Chevrolet: 4 Cyl. 153 Eng.
Timing Gear Matched Set: C-2525S

Cam Dur. @ Lobe Drive Crank Cam Lifter #/

Cam # Lift .050 Type Center Material Type Rot. Rot. OEM #
E-786-S Int .232 190 Hyd. 113 Cast Iron Gear R.H. L.H. HL-1817
Exh .232 190 110 2770015
2770019
3853850

Chevrolet: 4 Cyl. 181 Eng.

Cam Dur. @ Lobe Drive Crank Cam Lifter #/
Cam # Lift .050 Type Center Material Type Rot. Rot. OEM #
E-1588-S Int .252 204 Hyd. 109 Cast Iron Gear R.H. L.H. HL-1817
Exh .252 204 115 3937765
9341350

Chevrolet: 6 Cyl. 230, 250 Eng.

Cam Dur. @ Lobe Drive Crank Cam Lifter #/
Cam # Lift .050 Type Center Material Type Rot. Rot. OEM #
E-1587-S Int .230 192 Hyd. 113 Cast Iron Gear R.H. L.H. HL-1817
Exh .230 192 110 3891590

Chevrolet: 6 Cyl. 262 Eng.

Cam Dur. @ Lobe Drive Crank Cam Lifter #/
Cam # Lift .050 Type Center Material Type Rot. Rot. OEM #
E-1016-P Int .269 202 Hyd. 110 Cast Iron Chain R.H. R.H. HL-1817
Exh .276 207 114 14095789
E-1032-P Int .273 203 Hyd. 111 Cast Iron Chain R.H. R.H. HL-1817
Exh .273 214 115 14095859
E-1033-P Int .269 202 RLR 108 5150 Steel Chain R.H. R.H. HL-2148
Exh .273 213 116 14096233
E-1573-S Int .269 202 RLR 108 5150 Steel Gear L.H. R.H. HL-2148
Exh .273 213 116 14096234

Chevrolet: 6 Cyl. 292 Eng.

Cam Dur. @ Lobe Drive Crank Cam Lifter #/
Cam # Lift .050 Type Center Material Type Rot. Rot. OEM #
E-551-S Int .232 188 Hyd. 113 Cast Iron Gear R.H. L.H. HL-1817
Exh .232 188 110 3789544
3847998

Chevrolet: 8 Cyl. 283, 305, 307, 327, 350 Eng. (Excl. HO & Magnum
w/Roller Lifters)
Timing Chain Set: SS-3100 True-Roller Type Set (3 Keyway Crank Sprocket)
Timing Cam Gear: C-2534; Crank Gear: C-2535

Cam Dur. @ Lobe Drive Crank Cam Lifter #/

Cam # Lift .050 Type Center Material Type Rot. Rot. OEM #
E-1575-S Int .267 202 Hyd. 108 Cast Iron Chain R.H. R.H. HL-1817
Exh .273 213 112 6262944
E-1576-S Int .267 202 Hyd. 108 Cast Iron Gear L.H. R.H. HL-1817
Exh .273 213 112 6272972

Use Elgin Remedy ZDDP-4 with your cams

32. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Marine Camshafts
Chevrolet: 8 Cyl. 327 HO Eng., 350 HO Eng. (Excl. Magnum
w/Roller Lifters
Timing Chain Set: SS-3100 True-Roller Type Set (3 Keyway Crank Sprocket)
Timing Cam Gear: C-2534; Crank Gear: C-2535

Cam Dur. @ Lobe Drive Crank Cam Lifter #/

Cam # Lift .050 Type Center Material Type Rot. Rot. OEM #
E-921-P Int .300 224 Hyd. 114 Cast Iron Chain R.H. R.H. HL-1817
Exh .307 224 114 3896962
431-5952

Chevrolet: 8 Cyl. 427, 454 Magnum Eng.

Timing Chain Set: SS-3100 True-Roller Type Set (3 Keyway Crank Sprocket)
Timing Cam Gear: C-2530; Crank Gear: C-2531; Timing Gear Set: C-2532S

Cam Dur. @ Lobe Drive Crank Cam Lifter #/

Cam # Lift .050 Type Center Material Type Rot. Rot. OEM #
*E-1589-S Int .270 214 Hyd. 110 Cast Iron Chain R.H. R.H. HL-1817
Exh .282 218 120 3883986
*E-1571-S Int .270 214 Hyd. 110 Cast Iron Gear L.H. R.H. HL-1817
Exh .282 218 120 3906688
* - When using E-1571-S & E-1589-S in 1965-66 applications, a 3/16” wide x 7/32” deep groove must be machined in the center of the
rear cam journal.

Chevrolet: 8 Cyl. 454 HO (Excl. Hi-Perf.) 350 Eng. w/310-430 HP

Timing Chain Set: SS-3110 True-Roller Type Set (3 Keyway Crank Sprocket)
Timing Gear Set: C-2532S

Cam Dur. @ Lobe Drive Crank Cam Lifter #/

Cam # Lift .050 Type Center Material Type Rot. Rot. OEM #
E-1116-P Int .312 229 Hyd. 109 Cast Iron Chain R.H. R.H. HL-1817
Exh .324 236 119 451-7892

Chevrolet: 8 Cyl. 502 Magnum Eng.

Cam Dur. @ Lobe Drive Crank Cam Lifter #/
Cam # Lift .050 Type Center Material Type Rot. Rot. OEM #
E-1064-P Int .300 224 Hyd. 114 Cast Iron Chain R.H. R.H. HL-1817
Exh .300 224 117 14096209
E-1584-S Int .300 224 Hyd. 114 Cast Iron Gear L.H. R.H. HL-1817
Exh .300 224 117 14096458

Chevrolet: 8 Cyl. 540 Eng. (Excl. Hi-Perf.) w/525 HP

Cam Dur. @ Lobe Drive Crank Cam Lifter #/
Cam # Lift .050 Type Center Material Type Rot. Rot. OEM #
E-1116-P Int .312 229 Hyd. 109 Cast Iron Chain R.H. R.H. HL-1817
Exh .324 236 119 451-7892

Use Elgin Remedy ZDDP-4 with your cams

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 33.

Marine Camshafts
Chrysler: 6 Cyl. 170, 225 Eng.
Cam Dur. @ Lobe Drive Crank Cam Lifter #/
Cam # Lift .050 Type Center Material Type Rot. Rot. OEM #
E-380-S Int .270 198 Mech 107 Cast Iron Chain R.H. R.H. VT-2084
Exh .276 202 111 2128644
2264105
2465852
2843563
3512639
4104437

Chrysler: 8 Cyl. 273 Eng. & 1967 & Up 318 Eng.

Timing Chain Set: SS-3103 True-Roller Type Set (3 Keyway Crank Sprocket)

Cam Dur. @ Lobe Drive Crank Cam Lifter #/

Cam # Lift .050 Type Center Material Type Rot. Rot. OEM #
E-1585-S Int .273 198 Hyd. 114 Cast Iron Chain R.H. R.H. HL-2011
Exh .274 199 108 2806283

Chrysler: 8 Cyl. 340, 360 Eng.

Timing Chain Set: SS-3103 True-Roller Type Set (3 Keyway Crank Sprocket)

Cam Dur. @ Lobe Drive Crank Cam Lifter #/

Cam # Lift .050 Type Center Material Type Rot. Rot. OEM #
E-1579-S Int .286 210 Hyd. 118 Cast Iron Chain R.H. R.H. HL-2011
Exh .296 221 110 3675869

Ford: 8 Cyl. 260, 289, 302, 351W Eng.

Timing Chain Set: SS-3135 True-Roller Type Set (3 Keyway Crank Sprocket)

Cam Dur. @ Lobe Drive Crank Cam Lifter #/

Cam # Lift .050 Type Center Material Type Rot. Rot. OEM #
^E-870-S Int .278 206 Hyd. 117 Cast Iron Chain R.H. R.H. HL-1900
Exh .283 221 113 D2JE-6250BA
E0AZ-6250A
^ - Rewire the distributor to the 351W Firing order 1-3-7-2-6-5-4-8

Ford: 8 Cyl. 429, 460 Eng.

Timing Chain Set: SS-3130 True-Roller Type Set (3 Keyway Crank Sprocket)

Cam Dur. @ Lobe Drive Crank Cam Lifter #/

Cam # Lift .050 Type Center Material Type Rot. Rot. OEM #
E-1586-S Int .285 216 Hyd. 109 Cast Iron Chain R.H. R.H. HL-1900
Exh .290 220 120 D3JE-6250AA

Mercury Marine: 4 Cyl. 224 Eng.

Cam Dur. @ Lobe Drive Crank Cam Lifter #/
Cam # Lift .050 Type Center Material Type Rot. Rot. OEM #
E-1583-S Int .287 208 Hyd. 111 Cast Iron Chain R.H. R.H. HL-1900
Exh .290 220 117 4669410

Use Elgin Remedy ZDDP-4 with your cams

34. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Camshaft / Chemicals
Cam Bolt Lock Plate Kit
Chevrolet: 8 Cyl. Small Block / Big Block
Bendable Locking Tabs to secure bolts at any RPM. Grade 8 Bolts.

Kit Number Kit Includes

839030 Lock Plate with Bolts

Elgin® Cam Buttons: For Roller Cams

Cam buttons are required to hold roller cams at the rear of the engine.
The cam button is positioned between the timing gear and front cover and is commonly shimmed for precise
cam end play. Elgin offers both solid nylon type and high performance roller cam buttons.

Mfg. Part Number Description Length

Chevy Small Block SS-202 Nylon Thrust Button .810”
SS-205 Nylon Thrust Button .945”
Chevy Big Block
SS-207 Roller Button .945”

Chemicals
Elgin Engine Pre-Lube (EPL-4) is a scientifically blended oil with premium thickeners and additives
designed to help ensure maximum lubrication when assembling an engine. It protects against scoring,
scuffing, and coking of cams and metallic surfaces and is also recommended for use on bearings, gears,
cam lobes, valve stems, lifters and all mating parts with close tolerances.

Elgin Remedy with ZDDP (ZDDP-4) is an exclusive, powerful blend of ZDDP (15,000 ppm per ounce), moly
and other proven wear additives that restore oils to pre-OBD quality and performance. This industry leading
formula is compatible with all engine oils and ideal for any on- or off-road racing engine.

Elgin Remedy Anti-Seize-(CAS-8) features an exclusive professional-grade formula that provides

maximum resistance to corrosion and resists temperatures up to 2000° F.

Elgin Remedy White Lithium Grease (WLG-8) is a perfect way to prevent premature component wear
caused by friction and/or corrosion.

EPL-4 ZDDP-4 CAS-8 WLG-8

(4 oz.) (4 oz.) (8 oz.) (8 oz.)

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 35.

Lifters
Elgin has a complete line of “standard” hydraulic lifters, high performance “anti pump-up” lifters, solid/
mechanical lifters, Retro-Fit Tie Bar hydraulic and mechanical lifters and stock hydraulic roller lifters.

Elgin Pro Stock lifters are engineered and manufactured by the OEM suppliers to give you the peace of mind
that when you purchase an Elgin lifter it is an exceptionally designed product that is held to the highest quality
standards demanded by the original equipment manufacturers. Oil metering valves are tailored to the specific
engine application to deliver precise lubrication of the overhead valve train components. The ball design check
valve provides outstanding response and reliability. Plunger and check ball springs are precisely balanced to
allow uniform operation at high speeds.

A few common sense tips that should be noted:

NEVER, EVER re-use old lifters when replacing the camshaft!! This
is a recipe for disaster and will wipe out a cam very quickly. Use a
reputable pre-lube and apply generously to all mating surfaces to
prevent wear and tear on break-in. Elgin EPL-4 is recommended
for use on all lifters and cams. Adhere to original equipment
specifications for lifter pre-load for hydraulic lifters and the camshaft
manufacturers recommendation for valve lash on solid lifter
applications. Make certain that the lifter bores are “true” and the
lifter spins evenly during and after break in period. A sticking lifter
in a worn bore is a leading cause of camshaft failure. These tips will
help ensure the lifters performance, reliability and durability.

Hydraulic lifters require proper pre-load. Correct pre-load should be set at .020”-.060”. On an adjustable valve
train, first, tighten the adjusting nut while spinning the pushrod. When you feel a slight drag on the push rod, this
is “zero-lash”. Next, turn the nut one-half to one full turn to achieve correct pre-load, which will vary depending
on the lifter manufacturer and the thread pitch of the stud. Using a dial indicator is the best way to check proper
pre-load. On a non-adjustable valve train, use an adjustable push rod and tighten the nut to zero lash. Check
the length at zero lash and use push rods that are .020”-.060” longer to get to proper pre-load. Following these
procedures will help to avoid excessive valve train noise due to insufficient pre-load and many other performance
issues caused by too much pre-load.

Solid lifters require a lash setting that is determined by the camshaft manufacturer. Always use the manufacturers
recommended settings. Most camshaft manufacturers will use a “hot lash” setting. When setting lash, tighten the
nut until a there is a slight drag on the feeler gauge to determine the correct lash setting. After the engine is hot,
repeat this step as the measurement will change depending on the material of the head and block.

36. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Lifters
Elgin Pro Stock Lifters
Mfg. Engines Years Stock High Performance Elgin Pro Stock High
AMC/Jeep 150-401 CID 1961-04 HL-2011 HL-2011HP Performance lifters
Buick 181-455 CID 1970-88 HL-1969 HL-1969HP feature Premium grade/
122 (2.0L), 134 (2.2L) 1983-93 HL-1969 HL-1969HP high strength material
Chevrolet
112-454 CID 1955-86 HL-1817 HL-1817HP and an ultra strong steel
150-440 CID 1968-89 HL-2011 HL-2011HP retainer to precisely
225 (3.7L) 1981-87 HL-2089
Chrysler limit plunger travel and
221-426 CID 1953-67 HL-1812 HL-1812HP
allow the valve train to
361-440 CID 1958-79 HL-1976 HL-1976HP
perform as a mechanical
140-460 CID 1962-93 HL-1900 HL-1900HP
Ford system for high RPM
144-462 CID 1952-92 HL-2083 HL-2083HP
260-455 CID performance and stability.
Oldsmobile Exc. 400, 425, F85, 1964-84 HL-1951 HL-1951HP
442, Toronado High Performance lifters
151, 265, 301 CID HL-1969 HL-1969HP require adjustable
Pontiac 1956-79
195-455 CID HL-1951 HL-1951HP rocker arms.

Mechanical Tappets
Mfg. Engines Years Part Number
140, 145, 153, 164, 194, 200, 229, 230, 250, 262, 265, 267, 283,
1955-93 VT-1992
302, 305, 307, 327, 348, 350, 396, 400, 402, 409, 427, 454
Chevrolet 140, 145, 153, 164, 194, 200, 229, 230, 250, 262, 265, 267, 283,
302, 305, 307, 327, 348, 350, 396, 400, 402, 409, 427, 454 1955-93 VT-1883
For use on steel or hardfaced cams (Chilled Iron)
Chrysler 170, 198, 225, 273, 277, 301, 303, 318, 361, 413, 426 Std., 440 1955-93 VT-2084

144, 159, 170, 171, 177, 325, 390, 406, 427, 428 1960-79 VT-1872
Ford
289, 302 1963-69 VT-2000
Pontiac 301, 316, 326, 347, 370, 389, 400, 421, 455 1956-81 VT-1992

Add an S to ALL Lifter numbers for a boxed set of 4

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 37.

Lifters
Stock Hydraulic Roller Lifters
Elgin Stock Hydraulic Roller Lifters are designed to meet all OEM specifications and manufactured to OEM
design and quality standards.

Mfg. Engines Years Part Number

202, 230, 239, 318, 360, 488 1990-02 HL-2269
5.7L, 6.1L Hemi w/o MDS
2005 & up HL-7013K
4 Lifter Assembly w/Cradle
5.7L, 6.1L Hemi w/MDS
Chrysler 2005 & up HL-7014K
4 Lifter Assembly w/Cradle - Front
5.7L, 6.1L Hemi w/MDS
2005 & up HL-7015K
4 Lifter Assembly w/Cradle - Rear
5.7L, 6.1L Hemi w/o MDS
2005 & up HL-7016
Individual Lifter w/o Cradle
116, 122 1987-04 HL-2269
183 (Exc. SHO), 230, 232, 256, 302, 351W 1985-07 HL-2205
Ford
363, 421, 445 Diesel Trucks 1983-09 HL-2201
406 (6.7L) Diesel 2011-20 HL-2010
134 (2.2L), 189 (3.1L), 207 (3.4L), 213 (3.5L) 1990-05 HL-2270
151, 204N, 231, 252, 262, 273, 300, 305, 350L 1984-03 HL-2148
262 Diesel, 307 Gas, 350N Diesel 1981-90 HL-2201
General Motors
294 (4.8L), 323 (5.3L), 350 (5.7L) LS1, 364 (6.0L) 1997 & up HL-2148
323 (5.3L) w/Active Fuel Management 2005 & up HL-7011
454, 496 1996-05 HL-7003

Add an S to ALL Lifter numbers for a boxed set of 4

Lifter Guides
Qty. Per
Application Part Number
Engine
LS Engines – Non-Active Fuel Management HLG-2148 4

LS Engines – Active Fuel Management, Front HLG-7011F 2

LS Engines – Active Fuel Management, Rear HLG-7011R 2

38. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Lifters
Hydraulic Roller Lifter/Lifter Guide Assembly for
GM LS Engines with Active Fuel Management

HLG-7011FRA
• Complete Set for Entire Engine
• Pre-Assembled for Easy Drop-In Installation
• No Guess Work – Lifters are all Oriented in the Guide to Install
the AFM and Non-AFM Lifters in the Correct Cylinders

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 39.

Lifters
Retro Fit Roller Lifters
Elgin Retro-Fit Lifters are the perfect choice for street performance engines and offer reduced friction,
increased horsepower and performance. Manufactured in the USA, the outside diameters are to O.E
specs for proper oil control.

To set the preload, tighten the rocker nut to zero lash and then turn the nut to the following
recommendations:

• Cast Iron Head/Cast Iron Block - .025”

• Aluminum Head/ Cast Iron Block - .035”
• Aluminum Head/ Aluminum Block - .045”

This is based on the engine temperature of 70 degrees F.

Elgin Retro-Fit Lifters are recommended for use on spring pressures of less than 140 lbs. on seat and
380 lbs. open.

Application Hydraulic Mechanical

Buick 401, 425, 455 HL-4018S HL-4019S
Chevy Small Block HL-4001S HL-4002S
Chevy Big Block HL-4003S HL-4005S
Chevy 348, 409 HL-4022S HL-4023S
Chrysler Small Block HL-4012S
Chrysler Big Block HL-4014S
Ford Small Block HL-4008S HL-4009S
Ford Big Block HL-4010S HL-4011S
GM LS Engines HL-4006S HL-4007S
GM LS Engines Non Tie Bar - Individual Lifter HL-5000S
Holden V-8 HL-4020S HL-4021S

40. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Push Rods

For over 50 years Elgin Industries has been perfecting the process of producing the finest
push rods in the industry. From the very beginning our engineers have worked tirelessly with
OEM engineers to improve product reliability and longevity and have created a partnership
with the OEM’s to assume the position of the preferred Tier One supplier of push rods for
many of the most demanding engines in the world.

Elgin Industries utilizes the same principles in our aftermarket push rods. Our relentless
pursuit of the best materials, engineering and design, manufacturing process and
commitment to excellence and customer satisfaction makes us the company to look to for
your push rod needs. Elgin’s push rods are all manufactured in Elgin, Illinois. Our investment
in the highest quality equipment including our state-of-the-art tube mill, welding equipment,
in-house heat treat including cryogenic capabilities, grinding and finishing machines
ensures that every push rod adheres to the tightest tolerances and hardness requirements.

Our high performance push rods have evolved over the years. Beginning with our 500
series welded ball design to the chrome-moly 700 series to our One-Piece thick wall push
rods. Due to the overwhelming demand for these superior push rods, Elgin has added
nearly 100 part numbers and lengths to our One- Piece push rod line. Offering you the
greatest range of lengths you need for virtually any application. Elgin Industries is also
committed to and constantly updating our manufacturing processes to adhere to the most
up to date industry quality certifications (ISO 9001, IATF 16949) and is committed to the
environment with our certifications (ISO 14001) as well.

Elgin Industries…
THE push rod manufacturer!!!!

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 41.

Push Rods
Elgin Industries Manufacturing
Elgin Industries engineers have developed a very
sophisticated manufacturing process that allows us to
Cryogenic Capabilities
produce multiple types of push rods simultaneously
We have several dedicated production lines specific
to our OE customers and aftermarket products. We
have production lines dedicated to welded end push
rods and pressed end push rods and even a hybrid
line for combination of pressed and welded ends.
Because of all these dedicated production lines,
Elgin has the capability to produce over 150,000
push rods every day. Elgin employees are highly
skilled and trained in our manufacturing processes
and perform periodic product inspections to ensure
all push rods meet tolerances.

We have developed a unique welding system

designed to hold lengths of our push rods to +/-
.13mm. We can manufacture lengths ranging from
5-1/2” to 12” using either standard 1010 steel or
4130 chrome-moly. Our wall thicknesses range from
a stock .060” tube to .137” in our 3/8” One Piece State of the Art Tube Mill
Push Rods. We utilize a centerless grinder and hard
turning for our One Piece Thick Wall Push Rods to
achieve a 210 degree radius on the ends for extreme
lift and high performance camshaft profiles and will
hold up to virtually any valve spring load.

42. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Push Rods
Tip Configuration Guide

A B D E G H J O P W 210° 210°
3/8 5/16
Tube Tube

A = 5/16 Cup - No Oil Hole G = 5/16 Pressed - Oil Hole 210° P = 5/16 Welded - No Oil Hole
B = 3/8 Pressed - No Oil Hole H = 5/16 Pressed - Oil Hole W = 5/16 One-Piece - Oil Hole
D = 5/16 Pressed - No Oil Hole - 3/8 Tube J = 5/16 Pressed - Oil Hole - 3/8 Tube 210° = 5/16 One-Piece - Oil Hole - 3/8 Tube
E = 3/8 Welded - No Oil Hole O = 5/16 Welded - Oil Hole 210° = 5/16 One-Piece - Oil Hole - 5/16 Tube

MEASURED LENGTH

500 Series
• All 500 Series push rods feature 5/16” diameter and
.075” wall thickness giving you 20% greater column strength than stock push rods.
• Manufactured from heavy wall 1010 carbonitrited steel tube for exceptional wear. Greater than 55 RC
hardness. Deep case carburized 1018 steel ball ends with greater than 60 RC hardness. Rated for spring
pressures up to 400 lbs.

Part Number Length Ends Guide Plate Part Number Length Ends Guide Plate
PR-581 6.887 O-O Yes PR-580 7.850 O-O Yes
PR-573 7.195 O-O Yes PR-577 7.900 O-O Yes
PR-514 7.393 O-O Yes ICE300577
7.900 O-O Yes
ICE300514 (Black Ice)
(Black Ice) 7.393 O-O Yes
PR-582 7.950 O-O Yes
PR-559 7.513 P-P Yes PR-560 8.177 O-O Yes
PR-503 7.642 O-O Yes PR-579 8.255 O-O Yes
PR-515 7.450 O-O Yes
PR-540 8.555 P-P Yes
PR-554 7.650 O-O Yes
PR-502 8.595 O-O Yes
PR-539 7.700 O-O Yes
PR-561 9.164 O-O Yes
PR-538 7.750 O-O Yes
ICE300538 PR-592 9.200 O-O Yes
7.750 O-O Yes
(Black Ice) PR-541 9.295 P-P Yes
PR-537 7.800 O-O Yes PR-562 9.682 O-O Yes
ICE300537
7.800 O-O Yes
(Black Ice)

See front pages for details on Black Ice products.

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 43.

Push Rods
700 Series
• Manufactured from 4130 seamless chrome moly nitrocarburized to greater than 60 RC hardness and
feature .065” wall thickness. Available in 5/16”, 3/8” and 11/32” diameters. Ideal for spring pressures greater
than 300 lbs.

Part Guide Part Guide

Number Length Diameter Ends Plate Number Length Diameter Ends Plate
PR-763 6.804 5/16 H-H Yes PR-765 8.680 3/8 J-J Yes
PR-748 6.886 5/16 H-H Yes PR-764 8.693 5/16 H-H Yes
PR-700 7.199 5/16 H-H Yes PR-742 8.710 3/8 A-D No
PR-720 7.497 5/16 A-B No PR-717B 8.905 3/8 A-D No
PR-759 7.513 5/16 B-B Yes PR-726 9.130 5/16 H-H Yes
PR-749 7.605 5/16 H-H Yes PR-730 9.130 11/32 D-D No
PR-754 7.645 5/16 H-H Yes PR-717A 9.180 3/8 A-B No
PR-739 7.700 5/16 H-H Yes PR-732 9.250 7/16 J-J Yes
PR-751 7.794 3/8 J-J Yes PR-714 9.252 3/8 J-J Yes
PR-737 7.800 5/16 H-H Yes PR-741 9.295 5/16 B-B Yes
PR-780 7.850 5/16 H-H Yes PR-705 9.339 11/32 A-E No
PR-777 7.900 5/16 H-H Yes PR-717 9.357 3/8 A-D No
PR-792 7.944 3/8 J-J Yes PR-743 9.450 3/8 A-D No
PR-782 7.950 5/16 H-H Yes PR-779 9.504 5/16 H-H Yes
PR-783 8.000 5/16 H-H Yes PR-758 9.547 5/16 H-H Yes
PR-787 8.050 5/16 H-H Yes PR-707 9.588 5/16 E-E No
PR-747 8.150 5/16 H-H Yes PR-708 9.618 5/16 E-E No
PR-776 8.182 5/16 H-H Yes PR-766 9.652 3/8 J-J Yes
PR-795 8.200 5/16 H-H Yes PR-762 9.682 5/16 H-H Yes
PR-713 8.280 3/8 J-J Yes PR-767 10.140 5/16 H-H No
PR-731 8.280 7/16 J-J Yes PR-744 10.645 3/8 A-D No
PR-746A 8.291 3/8 A-D No PR-705A 10.680 11/32 A-E No
PR-750 8.408 5/16 H-H Yes PR-715 10.812 3/8 A-D No
PR-753 8.492 5/16 H-H Yes PR-755 11.382 5/16 H-H Yes
PR-778 8.550 5/16 H-H Yes PR-745 11.612 3/8 A-D No
PR-740 8.555 5/16 B-B Yes PR-716 11.740 3/8 A-D No
PR-746 8.567 3/8 A-D No

44. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Push Rods
One Piece Thick Wall Push Rods
• Manufactured from 4130
aircraft quality seamless
chrome moly.

• Centerless ground and

fully hard turned 210°
radius ends.

• Through hardened and

carburized tube with
greater than 58 RC
hardness and held to .005”
maximum runout.

• Up to 40% greater column

strength for superior
strength and durability
and increased stiffness
to virtually eliminate
compression and
deflection which could lead
to valve float and possibly
catastrophic failure.

• Black oxide coated.

Premium Quality Parts

Made in the USA!!!!!

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 45.

Push Rods
One Piece Thick Wall Push Rods
5/16” x .106”
Part Number Length Part Number Length Part Number Length
PR-15615 6.150 PR-15752 7.525 PR-15890 8.900
PR-15620 6.200 PR-15755 7.550 PR-15895 8.950
PR-15625 6.250 PR-15760 7.600 PR-15900 9.000
PR-15630 6.300 PR-15765 7.650 PR-15905 9.050
PR-15635 6.350 PR-15770 7.700 PR-15910 9.100
PR-15640 6.400 PR-15752 7.525 PR-15915 9.150
PR-15645 6.450 PR-15775 7.750 PR-15920 9.200
PR-15650 6.500 PR-15780 7.800 PR-15925 9.250
PR-15655 6.550 PR-15785 7.850 PR-15930 9.300
PR-15660 6.600 PR-15790 7.900 PR-15935 9.350
PR-15665 6.650 PR-15795 7.950 PR-15940 9.400
PR-15670 6.700 PR-15800 8.000 PR-15945 9.450
PR-15675 6.750 PR-15805 8.050 PR-15950 9.500
PR-15680 6.800 PR-15810 8.100 PR-15955 9.550
PR-15685 6.850 PR-15815 8.150 PR-15960 9.600
PR-15690 6.900 PR-15820 8.200 PR-15965 9.650
PR-15695 6.950 PR-15825 8.250 PR-15970 9.700
PR-15700 7.000 PR-15830 8.300 PR-15975 9.750
PR-15702 7.025 PR-15835 8.350 PR-15980 9.800
PR-15705 7.050 PR-15840 8.400 PR-15985 9.850
PR-15710 7.100 PR-15845 8.450 PR-151045 10.450
PR-15715 7.150 PR-15850 8.500 PR-151050 10.500
PR-15720 7.200 PR-15855 8.550 PR-151055 10.550
PR-15725 7.250 PR-15845 8.450 PR-151060 10.600
PR-15730 7.300 PR-15850 8.500 PR-151065 10.650
PR-15732 7.325 PR-15855 8.550 PR-151070 10.700
PR-15735 7.350 PR-15860 8.600 PR-151075 10.750
PR-15737 7.375 PR-15865 8.650 PR-151080 10.800
PR-15740 7.400 PR-15870 8.700 PR-151085 10.850
PR-15742 7.425 PR-15875 8.750 PR-151090 10.900
PR-15745 7.450 PR-15880 8.800 PR-151095 10.950
PR-15750 7.500 PR-15885 8.850

3/8” x .137”
Part Number Length Part Number Length Part Number Length
PR-13630 6.300 PR-13810 8.100 PR-13900 9.000
PR-13650 6.500 PR-13815 8.150 PR-13905 9.050
PR-13700 7.000 PR-13820 8.200 PR-13910 9.100
PR-13710 7.100 PR-13825 8.250 PR-13915 9.150
PR-13725 7.250 PR-13830 8.300 PR-13920 9.200
PR-13732 7.325 PR-13835 8.350 PR-13925 9.250
PR-13737 7.375 PR-13840 8.400 PR-13930 9.300
PR-13750 7.500 PR-13841 8.414 PR-13935 9.350
PR-13755 7.550 PR-13845 8.450 PR-13940 9.400
PR-13760 7.600 PR-13850 8.500 PR-13945 9.450
PR-13765 7.650 PR-13855 8.550 PR-13950 9.500
PR-13770 7.700 PR-13860 8.600 PR-13955 9.550
PR-13775 7.750 PR-13865 8.650 PR-13960 9.600
PR-13780 7.800 PR-13870 8.700 PR-13965 9.650
PR-13785 7.850 PR-13875 8.750 PR-13975 9.750
PR-13790 7.900 PR-13880 8.800 PR-13980 9.800
PR-13795 7.950 PR-13885 8.850 PR-13990 9.900
PR-13800 8.000 PR-13890 8.900 PR-13995 9.950
PR-13805 8.050 PR-13895 8.950

46. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Push Rod
Identification Chart
Listed By Progressive Length
Part Measured Guide Plate
Manufacturer Ends Material Tube
Number Length Use OK?
Universal PR-15615 6.150 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15620 6.200 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15625 6.250 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13630 6.300 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15630 6.300 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15635 6.350 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15640 6.400 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15645 6.450 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15655 6.550 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15665 6.650 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13650 6.500 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15650 6.500 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15660 6.600 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15670 6.700 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15675 6.750 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15680 6.800 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Ford PR-763 6.804 Pressed H-H 4130 5/16 x .065 Yes
Universal PR-15685 6.850 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Ford PR-748 6.886 Pressed H-H 4130 5/16 x .065 Yes
Ford PR-581 6.887 Welded O-O C1010 5/16 x .075 Yes
Universal PR-15690 6.900 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15695 6.950 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13700 7.000 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15700 7.000 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15702 7.025 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15705 7.050 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13710 7.100 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15710 7.100 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15715 7.150 One-Piece 210 Deg. 4130 5/16 x .106 Yes
GM PR-700 7.200 Pressed H-H 4130 5/16 x .065 Yes
Universal PR-15720 7.200 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13725 7.250 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15725 7.250 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15730 7.300 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13732 7.325 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15732 7.325 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15735 7.350 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13737 7.375 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15737 7.375 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15740 7.400 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15742 7.425 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15752 7.525 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13755 7.550 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15755 7.550 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13760 7.600 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15760 7.600 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Ford PR-749 7.605 Pressed H-H 4130 5/16 x .065 Yes
Ford, GM PR-515 7.450 Welded O-O C1010 5/16 x .075 Yes
Ford, GM PR-554 7.645 Welded O-O C1010 5/16 x .075 Yes
Ford, GM PR-754 7.645 Pressed H-H 4130 5/16 x .065 Yes
Universal PR-13765 7.650 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15765 7.650 One-Piece 210 Deg. 4130 5/16 x .106 Yes

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 47.

Push Rod
Identification Chart
Listed By Progressive Length (Continued)
Part Measured Guide Plate
Manufacturer Ends Material Tube
Number Length Use OK?
GM PR-539 7.700 Welded O-O C1010 5/16 x .075 Yes
GM PR-739 7.700 Pressed H-H 4130 5/16 x .065 Yes
Universal PR-13770 7.700 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15770 7.700 One Piece 210 Deg. 4130 5/16 x .106 Yes
GM PR-538 7.750 Welded O-O C1010 5/16 x .075 Yes
Universal PR-13775 7.750 One Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15775 7.750 One-Piece 210 Deg. 4130 5/16 x .106 Yes
GM PR-751 7.794 Pressed J-J 4130 3/8 x .065 Yes
GM PR-537 7.800 Welded O-O C1010 5/16 x .075 Yes
GM PR-737 7.800 Pressed H-H 4130 5/16 x .065 Yes
Universal PR-13780 7.800 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15780 7.800 One-Piece 210 Deg. 4130 5/16 x .106 Yes
GM PR-580 7.850 Welded O-O C1010 5/16 x .075 Yes
GM PR-780 7.850 Pressed H-H 4130 5/16 x .065 Yes
Universal PR-13785 7.850 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15785 7.850 One-Piece 210 Deg. 4130 5/16 x .106 Yes
GM PR-577 7.900 Welded O-O C1010 5/16 x .075 Yes
GM PR-777 7.900 Pressed H-H 4130 5/16 x .065 Yes
Universal PR-13790 7.900 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15790 7.900 One-Piece 210 Deg. 4130 5/16 x .106 Yes
GM PR-792 7.944 Pressed J-J 4130 3/8 x .065 Yes
GM PR-582 7.950 Welded O-O C1010 5/16 x .075 Yes
GM PR-782 7.950 Pressed H-H 4130 5/16 x .065 Yes
Universal PR-13795 7.950 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15795 7.950 One-Piece 210 Deg. 4130 5/16 x .106 Yes
GM PR-783 8.000 Pressed H-H 4130 5/16 x .065 Yes
Universal PR-13800 8.000 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15800 8.000 One-Piece 210 Deg. 4130 5/16 x .106 Yes
GM PR-787 8.050 Pressed H-H 4130 5/16 x .065 Yes
Universal PR-13805 8.050 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15805 8.050 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13810 8.100 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15810 8.100 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Ford PR-747 8.150 Pressed H-H 4130 5/16 x .065 Yes
Universal PR-13815 8.150 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15815 8.150 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Ford PR-776 8.182 Pressed H-H 4130 5/16 x .065 Yes
GM PR-795 8.200 Pressed H-H 4130 5/16 x .065 Yes
Universal PR-13820 8.200 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15820 8.200 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13825 8.250 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15825 8.250 One-Piece 210 Deg. 4130 5/16 x .106 Yes
GM PR-713 8.280 Pressed J-J 4130 3/8 x .065 Yes
GM PR-731 8.280 Pressed J-J 4130 7/16 x .065 Yes
Chrysler PR-746A 8.291 Pressed A-D 4130 3/8 x .065 No
Universal PR-13830 8.300 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15830 8.300 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13835 8.350 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15835 8.350 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13840 8.400 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15840 8.400 One-Piece 210 Deg. 4130 5/16 x .106 Yes

48. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Push Rod
Identification Chart
Listed By Progressive Length (Continued)
Part Measured Guide Plate
Manufacturer Ends Material Tube
Number Length Use OK?
Ford PR-750 8.408 Pressed H-H 4130 5/16 x .065 Yes
Universal PR-13841 8.414 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-13845 8.450 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15845 8.450 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Ford PR-753 8.492 Pressed H-H 4130 5/16 x .065 Yes
Universal PR-13850 8.500 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15850 8.500 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Ford PR-778 8.550 Pressed H-H 4130 5/16 x .065 Yes
Universal PR-13855 8.550 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15855 8.550 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Chrysler, Ford PR-540 8.555 Welded P-P C1010 5/16 x .075 Yes
Chrysler PR-740 8.555 Pressed B-B 4130 5/16 x .065 Yes
Chrysler PR-746 8.567 Pressed A-D 4130 3/8 x .065 No
Universal PR-13860 8.600 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15860 8.600 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13865 8.650 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15865 8.650 One-Piece 210 Deg. 4130 5/16 x .106 Yes
GM PR-765 8.680 Pressed J-J 4130 3/8 x .065 Yes
Ford, GM PR-764 8.693 Pressed H-H 4130 5/16 x .065 Yes
Universal PR-13870 8.700 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15870 8.700 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Chrysler PR-742 8.710 Pressed A-D 4130 3/8 x .065 No
Universal PR-13875 8.750 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15875 8.750 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13880 8.800 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15880 8.800 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13885 8.850 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15885 8.850 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13890 8.900 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15890 8.900 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Chrysler PR-717B 8.905 Pressed A-D 4130 3/8 x .065 No
Universal PR-13895 8.950 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15895 8.950 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13900 9.000 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15900 9.000 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13905 9.050 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15905 9.050 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13910 9.100 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15910 9.100 One-Piece 210 Deg. 4130 5/16 x .106 Yes
GM PR-726 9.130 Pressed H-H 4130 5/16 x .065 Yes
GM PR-730 9.130 Pressed D-D 4130 11/32 x .065 No
Universal PR-13915 9.150 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15915 9.150 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Chrysler PR-717A 9.180 Pressed A-B 4130 3/8 x .065 No
Universal PR-13920 9.200 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15920 9.200 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13925 9.250 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15925 9.250 One-Piece 210 Deg. 4130 5/16 x .106 Yes
GM PR-714 9.252 Pressed J-J 4130 3/8 x .065 Yes
GM PR-732 9.252 Pressed J-J 4130 7/16 x .065 Yes
Chrysler PR-541 9.295 Welded P-P C1010 5/16 x .075 Yes
Chrysler PR-741 9.295 Pressed B-B 4130 5/16 x .065 Yes

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 49.

Push Rod
Identification Chart
Listed By Progressive Length (Continued)
Part Measured Guide Plate
Manufacturer Ends Material Tube
Number Length Use OK?
Universal PR-13930 9.300 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15930 9.300 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Ford PR-705 9.339 Pressed A-E 4130 11/32 x .065 No
Universal PR-13935 9.350 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15935 9.350 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Chrysler PR-717 9.357 Pressed A-D 4130 3/8 x .065 No
Universal PR-13940 9.400 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15940 9.400 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Chrysler PR-743 9.450 Pressed A-D 4130 3/8 x .065 No
Universal PR-13945 9.450 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15945 9.450 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13950 9.500 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15950 9.500 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Ford PR-779 9.504 Pressed H-H 4130 5/16 x .065 Yes
GM PR-758 9.547 Pressed H-H 4130 5/16 x .065 Yes
Universal PR-13955 9.550 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15955 9.550 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Ford PR-707 9.588 Pressed E-E 4130 5/16 x .065 No
Universal PR-13960 9.600 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15960 9.600 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Ford PR-708 9.618 Pressed E-E 4130 5/16 x .065 No
Universal PR-13965 9.650 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15965 9.650 One-Piece 210 Deg. 4130 5/16 x .106 Yes
GM PR-766 9.652 Pressed J-J 4130 3/8 x .065 Yes
GM PR-562 9.682 Welded O-O C1010 5/16 x .075 Yes
GM PR-762 9.682 Pressed H-H 4130 5/16 x .065 Yes
Universal PR-15970 9.700 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13975 9.750 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15975 9.750 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13980 9.800 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-15980 9.800 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-15985 9.850 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-13990 9.900 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Universal PR-13995 9.950 One-Piece 210 Deg. 4130 3/8 x .137 Yes
Ford PR-767 10.140 Pressed H-H 4130 5/16 x .065 No
Universal PR-151045 10.450 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-151050 10.500 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-151065 10.650 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Chrysler PR-744 10.645 Pressed A-D 4130 3/8 x .065 No
Chrysler PR-715 10.657 Pressed A-D 4130 3/8 x .065 No
Ford PR-705A 10.680 Pressed A-E 4130 11/32 x .065 No
Universal PR-151070 10.700 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-151075 10.750 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-151080 10.800 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-151085 10.850 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-151090 10.900 One-Piece 210 Deg. 4130 5/16 x .106 Yes
Universal PR-151095 10.950 One-Piece 210 Deg. 4130 5/16 x .106 Yes
GM PR-755 11.382 Pressed H-H 4130 5/16 x .065 Yes
Chrysler PR-716 11.585 Pressed A-D 4130 3/8 x .065 No
Chrysler PR-745 11.612 Pressed A-D 4130 3/8 x .065 No

50. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Push Rods

Length Checkers
Part Number Length Description Application
PRC-100 Master Kit - 1 ea. PRC-101 thru PRC-105 Ford & GM
PRC-101 7.500" - 8.700" 5/16 Diameter & 5/16 Ball Ends Ford & GM
PRC-102 8.500" - 9.800" 5/16 Diameter & 5/16 Ball Ends Ford & GM
PRC-103 9.700" - 11.000" 5/16 Diameter & 5/16 Ball Ends Ford & GM
PRC-104 10.200" - 11.500" 5/16 Diameter & 5/16 Ball Ends Ford & GM
PRC-105 6.125" - 7.500" 5/16 Diameter & 5/16 Ball Ends Ford & GM
PRC-110 8.350" - 9.800" 5/16 Diameter & 3/8 Ball & 5/16 Cup Chrysler Big Block
PRC-111 10.300" - 11.700" 5/16 Diameter & 3/8 Ball & 5/16 Cup Chrysler Hemi
PRC-112 6.900" - 8.350" 5/16 Diameter & 5/16 Ball & 5/16 Cup Chrysler Small Block

Guide Plates
Mfg. Part Number Type
GP100 Flat 5/16"
GP101 Flat 3/8"
Chevy Small Block
GP102 Raised 3/8"
GP103 Raised 5/16"
GP106 Raised 7/16"
Chevy Big Block
GP107 Raised 3/8"
Chevy Big Block –
GP115 Raised 3/8" - 10mm
Gen V & Gen VI
Chevy Big Block –
GP114 Raised 3/8”
OEM #3860038
GP108 Flat 5/16"
Ford 289, 302W, 351W
GP109 Flat 3/8"
GP110 Raised 3/8”
Ford 302 Boss, 351C & 351M
GP111 Raised 5/16”
GP112 Raised 3/8"
Ford 429, 460
GP113 Raised 5/16"

No Part Number Suffix = Package of 50

Add a S to part number = Box of 8
Add a K to part number = Skin Pack of 8

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 51.

Rocker Arms
Selecting the correct rocker arm for your specific application and performance expectations is a critical
decision to achieve your goals.

If you are doing a stock rebuild, a stock rocker arm is the best choice. Choosing a rocker arm with a long slot
and increased ratio can be detrimental and possibly cause engine damage due to excessive valve lift. Valve to
piston contact, valve spring coil bind, retainer to valve stem seal or guide and retainer to rocker arm contact are
also other common issues that will lead to premature failure and engine damage.

In a performance build with a higher lift camshaft, there are several options available. A rocker arm with a long
slot is recommended to avoid stud to arm contact. To reduce wear and fatigue on the valve stem, a roller tip
rocker arm is the correct choice. For increased horsepower and faster response while simultaneously reducing
valve tip wear and deflection, a full roller rocker arm is recommended.

Whatever your goals are, Elgin

has a rocker arm to fit your needs.
We manufacture stamped steel
stock or long slot rocker arms
with stock or higher ratios. Guide
rail options are available for Small
Block Chevy applications and
roller tip versions as well. In-house
heat treat operations allow us to
offer these in a hardened “Nitro”
version. For the best in durability
and wear resistance, “Black Ice”
cryogenically frozen rockers are
the choice for most racers. Both
offer the “stock appearance” in
classes where rules dictate.

Elgin’s stainless steel full

roller rockers with upgraded
roller trunnions have
proven themselves to be the
preferred option for high
performance engines that
demand extreme reliability.

52. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Rocker Arms
LS Engine Stock Rocker Arms
Part Qty Per
Applications Description
Number Vehicle
LS1, LS2, LS6 R-907 Exh. & Int. 16
R-907 Exh. - Straight 8
LS3, L92
R-908 Int. - Offset 8
R-912 Exh. 8
LS7
R-919 Int. 8
LV3, L83, L86 R-913 Exh. & Int. 12, 16

LS Engine Stainless Steel Drop-In Roller Rocker Arms

Part
Applications Description
Number
LS1, LS2, LS6 SSR-1907RS Kit Includes 16 Straight Rocker Arms and 16 Premium Fasteners
LS3, L92 SSR-1915RS Kit Includes 8 Straight Rocker Arms, 8 Offset Rocker Arms and 16 Premium Fasteners

Easily upgrade your stock rocker arms to a full

roller rocker system with these drop-in style kits.

These rockers arms are manufactured from 17-

4ph polished stainless steel and a heat treated
Cr40 roller tip to reduce wear on the valve tip.
Rated up to 400 lbs. open spring pressures.

The extra large full needle bearing trunnion is

designed with a clip on the outside to keep the
needle bearings in place and performing at
peak efficiency.

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 53.

Rocker Arms
Stainless Steel Roller Rocker Arms
Applications Part Number Ratio Stud Dia.
SSR-840RS 1.5 3/8
SSR-840SPRS 1.6 3/8
Chevy Small Block
SSR-1840RS 1.5 7/16
SSR-1840SPRS 1.6 7/16
Chevy Big Block SSR-868RS 1.72 7/16
Chrysler Small Block SSR-756RS 1.65 3/8
SSR-2889RS 1.6 3/8
Ford Small Block
SSR-889RS 1.6 7/16
SSR-888RS 1.6 7/16
Ford Big Block SSR-888SPRS 1.73 7/16
SSR-2888RS 1.8 7/16
SSR-907RS 1.7 3/8
GM LS1, LS2, LS6
SSR-907SPRS 1.8 3/8
Holden SSR-2848RS 1.65 7/16
SSR-846RS 1.5 7/16
Pontiac
SSR-848RS 1.65 7/16

Elgin Pro Stock Stainless Steel

Full Roller Rockers Arms
Feature an Extra Large Full
Needle Bearing Trunnion
designed to increase
horsepower, provide quicker
response, increase durability
and allow high RPM stability
with no deflection.

The large roller tip provides less

friction and a smooth path over the
valve tip which reduces wear on the
valve to rocker contact area.

The upgraded trunnion has a clip

on the outside to keep all the needle
bearings in place and operating at peak
performance.

The kits are conveniently clamshell packaged

and include 16 rocker arms and Posi-Locks.

Hardened Steel Reinforced Push Rod Seat to

reduce wear and fatigue.

54. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Rocker Arms
Stamped Steel Roller Tip Rocker Arm Kits
• All rocker arms feature long-slot design • Increase horsepower
• H-11 tool steel roller and pin • Reduce tip-rocker friction
• Precision ground roller (3 RA finish) • Reduced stud flex and failure
• Chevrolet Small Block 7/16” rocker arm kits feature • Ensures smooth valve train operation
ultra low friction dicronite coating on pivot ball

Application Part Number Ratio Stud Dia. Kit Contents

RK-840RK 8 ea. Roller Tip Rocker Arms, RM-1786 Nuts,
1.5 3/8
ICE410840R (Black Ice) RM-1792 Grooved Balls - Skin Packed

16 ea. Roller Tip Rocker Arms, RM-1786 Nuts,

RK-840RS 1.5 3/8
RM-1792 Grooved Balls - Boxed
RK-840SPRK 8 ea. Roller Tip Rocker Arms, RM-1786 Nuts,
1.6 3/8
ICE410840SPR (Black Ice) RM-1792 Grooved Balls - Skin Packed

16 ea. Roller Tip Rocker Arms, RM-1786 Nuts,

RK-840SPRS 1.6 3/8
Chevy Small Block RM-1792 Grooved Balls - Boxed
8 ea. Roller Tip Rocker Arms, RM-1793 Nuts,
RK-1840RK 1.5 7/16
RM-1000 Dicronite Coated Grooved Balls - Skin Packed
16 ea. Roller Tip Rocker Arms, RM-1793 Nuts,
RK-1840RS 1.5 7/16
RM-1000 Dicronite Coated Grooved Balls - Boxed
8 ea. Roller Tip Rocker Arms, RM-1793 Nuts,
RK-1840SPRK 1.6 7/16
RM-1000 Dicronite Coated Grooved Balls - Skin Packed
16 ea. Roller Tip Rocker Arms, RM-1793 Nuts,
RK-1840SPRS 1.6 7/16
RM-1000 Dicronite Coated Grooved Balls - Boxed
8 ea. Roller Tip Rocker Arms, RM-1776 Fulcrum,
RK-889RK 1.6 N/A
RM-1741 Bolts and Washers - Skin Packed
Ford 302 & 351W
16 ea. Roller Tip Rocker Arms, RM-1776 Fulcrum,
RK-889RS 1.6 N/A
RM-1741 Bolts and Washers - Boxed

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 55.

Rocker Arms
Elgin “Nitro”™ Stock-Appearing Rocker Arm Kits
• All Chevrolet rockers feature long-slot design • Advanced surface hardening provides increased
• Chevrolet Small Block 7/16” kits feature ultra low resistance to wear
friction dicronite coating on pivot ball • Ideally suited for racers in classes where stock
appearing parts are required

Application Part Number Ratio Stud Dia. Kit Contents

8 ea. Nitro Rocker Arms, RM-1786 Nuts,
RK-840NK 1.5 3/8
RM-1792 Grooved Balls - Skin Packed
16 ea. Nitro Rocker Arms, RM-1786 Nuts,
RK-840NS 1.5 3/8
RM-1792 Grooved Balls - Boxed
8 ea. Nitro Rocker Arms, RM-1786 Nuts,
RK-840SPNK 1.6 3/8
RM-1792 Grooved Balls - Skin Packed
16 ea. Nitro Rocker Arms, RM-1786 Nuts,
RK-840SPNS 1.6 3/8
RM-1792 Grooved Balls - Boxed
Chevy Small Block
8 ea. Nitro Rocker Arms, RM-1793 Nuts,
RK-1840NK 1.5 7/16
RM-1000 Grooved Balls - Skin Packed
16 ea. Nitro Rocker Arms, RM-1793 Nuts,
RK-1840NS 1.5 7/16
RM-1000 Grooved Balls - Boxed
8 ea. Nitro Rocker Arms, RM-1793 Nuts,
RK-1840SPNK 1.6 7/16
RM-1000 Grooved Balls - Skin Packed
16 ea. Nitro Rocker Arms, RM-1793 Nuts,
RK-1840SPNS 1.6 7/16
RM-1000 Grooved Balls - Boxed
8 ea. Nitro Rocker Arms, RM-1793 Nuts,
RK-868NK 1.72 7/16
RM-1797 Grooved Balls - Skin Packed
Chevy Big Block
16 ea. Nitro Rocker Arms, RM-1793 Nuts,
RK-868NS 1.72 7/16
RM-1797 Grooved Balls - Boxed

56. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Rocker Arms
Stamped Steel Rocker Arms
Application Part Number Ratio Stud Dia. Slot Kit Number Kit Contents
R-736 1 ea. Rocker Arm, Nut,
1.5 3/8 Stock RK-1736
w/Guide Rails Smooth Ball
1 ea. Rocker Arm, Nut,
RK-2736
Grooved Ball
ICE400736 (Black Ice) ICE410736 (Black Ice)
1 ea. Rocker Arm, Nut,
R-842 1.5 3/8 Stock RK-401
Smooth Ball
1 ea. Rocker Arm, Nut,
RK-501
Grooved Ball
ICE400842 (Black Ice) ICE410842 (Black Ice)
R-737 1 ea. Rocker Arm, Nut,
1.5 3/8 Long RK-1737
w/Guide Rails Smooth Ball
1 ea. Rocker Arm, Nut,
RK-2737
Chevy Small Block Grooved Ball
ICE400737 (Black Ice) ICE410737 (Black Ice)
1 ea. Rocker Arm, Nut,
R-840 1.5 3/8 Long RK-508
Grooved Ball
ICE400840 (Black Ice) ICE410840 (Black Ice)
R-738 1 ea. Rocker Arm, Nut,
1.6 3/8 Long RK-738
w/Guide Rails Grooved Ball
ICE400738 (Black Ice) ICE410738 (Black Ice)
1 ea. Rocker Arm, Nut,
R-840SP 1.6 3/8 Long RK-508SP
Grooved Ball
1 ea. Rocker Arm, Nut,
R-1840 1.5 7/16 Long RK-1508
Grooved Ball
ICE401840 (Black Ice) ICE411840 (Black Ice)
1 ea. Rocker Arm, Nut,
R-1840SP 1.6 7/16 Long RK-1508SP
Grooved Ball
1 ea. Rocker Arm, Nut,
R-867 1.72 7/16 Stock RK-504
Grooved Ball
Chevy Big Block 1 ea. Rocker Arm, Nut,
R-868 1.72 7/16 Long RK-507
Grooved Ball
ICE400868 (Black Ice) ICE410868 (Black Ice)
R-886 1 Rocker Arm, 2 Nuts,
1.6 Stock RK-610
Cast w/Guide Rails 1 Grooved Ball
1 Rocker Arm, 2 Nuts,
Ford 302 RK-610B
1 Smooth Ball
R-889 1 ea. Rocker Arm,
1.6 N/A Stock RK-548
Stamped Fulcrum, Bolt
Ford 302 Boss, 351, R-888 1 ea. Rocker Arm,
1.7 N/A Stock RK-547
429 Stamped Fulcrum, Bolt
1 ea. Rocker Arm, Nut,
R-846 1.5 3/8 Stock RK-536
Grooved Ball
ICE400846 (Black Ice)
Pontiac 1 ea. Rocker Arm, Nut,
R-848 1.65 3/8 Stock RK-532
Grooved Ball
ICE400848 (Black Ice)

Elgin “Black Ice” Rocker Arm Kits

are available!

See front pages for details.

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 57.

Rocker Arms

Rocker Arm Studs

Part Number A B C D Bottom / Top Thread Sizes Hex Nut

RDS-1920 2.325 1.600 .750 3/8 7/16-14 / 3/8-24 No
RDS-2920 2.325 1.725 .850 3/8 7/16-14 / 3/8-24 Yes
ICE102920 (Black Ice) 2.325 1.725 .850 3/8 7/16-14 / 3/8-24 Yes
RDS-920 2.500 Press-In .800 3/8 3/8-24 No
RDS-934 2.600 Press-In .862 3/8 3/8-24 No
RDS-940 2.670 1.910 .810 7/16 7/16-14 / 7/16-20 Yes
ICE100940 (Black Ice) 2.670 1.910 .810 7/16 7/16-14 / 7/16-20 Yes
RDS-941 2.560 1.765 .875 7/16 7/16-14 / 7/16-20 Yes
ICE100941 (Black Ice) 2.560 1.765 .875 7/16 7/16-14 / 7/16-20 Yes
RDS-942 61mm 41mm 19mm 8mm 10mm-1.50 / 8mm-1.25 No
RDS-945 2.250 1.490 .770 3/8 7/16-14 / 3/8-24 Yes
RDS-948 57mm 40mm 22mm 10mm 10mm-1.00 / 10mm-1.50 Yes
RDS-950 2.177 1.357 .720 3/8 8mm / 3/8 No
ICE100950 (Black Ice) 2.177 1.357 .720 3/8 8mm / 3/8 No

See front pages for details on Black Ice products.

Rocker Arm Accessories

Part Number Description Dia. Construction
RM-1731 Ball, Smooth 3/8 Powdered Metal
RM-1786 Nut 3/8-24 Steel
RM-1792 Ball, Grooved 3/8 Powdered Metal
RM-1793 Nut 7/16-20 Steel
RM-1797 Ball, Grooved 7/16 Powdered Metal
RM-1000 Ball, Grooved 7/16 Dicronite Coated
RM-1740 Bolt 5/16-18 Steel
RM-1741 Bolt & Washer 5/16-18 Steel
RM-1776 Fulcrum Powdered Metal

Adjustable Rocker Arm Nuts (Posi-Locks)

Part Number Description
RM-8823S 3/8 - 24 Thread. Use with Stamped Steel Rocker Arms
RM-8822S 7/16 - 20 Thread. Use with Stamped Steel Rocker Arms
RM-8828S 3/8 - 24 Thread. Low Profile for LS Stainless Steel Rocker Arms
7/16 - 20 Thread. 600 O.D. w/.550 Undercut for Stainless Steel
RM-8829S
Rocker Arms

58. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Valve Springs
Choosing the correct valve spring is a critical component of every engine rebuild. Springs with too much open
pressures will cause excessive wear on the cam lobes and “wipe” out a new camshaft quickly. Springs with
too little pressures will lead to coil bind and cause catastrophic failure to any of the valve train components.
Always refer to the camshaft manufacturers recommended spring pressures and never re-use worn out
valve springs. Even though they may look good to the eye, worn springs can severely affect the
performance of your engine. Replace any spring that is more than 1/32 inch out of square, has
experienced pressure loss of 10% or more or show signs of coil bind and/or worn ends.

Other important factors to consider include the max lift of the camshaft, rocker arm ratio, installed height,
retainer to oil seal clearance and rocker arm to retainer clearance. After all this has been determined, now it’s
time to choose the type of spring for your application. For stock or slightly modified engines, a single spring
may work fine, but for more aggressive street performance engines, using a spring with a damper is a better
choice for reducing harmonics and stability. For high performance and/or oval track use, a dual or dual with a
damper is the best choice for handling the loads and high RPM’s produced. A conical or “beehive” style spring
can also be used for more aggressive cam profiles and with the ovate wire design and reduced O.D. from
bottom to top, reduces resonance and has a dampening effect.

IMPORTANT:
Once the valve spring is
installed, measure the distance
between the bottom of the
retainer and the top of the
valve stem seal. This distance
must be greater than the valve
lift or contact will occur and
produce failure to one or more
of the components. Check for
coil bind!!! There must be a
minimum of .060” clearance
between the coils of the
springs. If that clearance does
not exist, change to a spring
that can handle more lift.

Whatever your needs, Elgin has a valve spring for you.

Our wide range of styles, O.D.’s and pressure ratings give you
the options for the correct spring for your application.

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 59.

Valve Springs
Single Springs
Coil Max. Spring /
Part Number Damper O.D. Closed Load Open Load
Bind Lift Retainer Kit
RV-9926 No 1.000 35 @ 1.560 73 @ 1.060 .910 .590
RV-9925 No 1.015 52 @ 1.812 139 @ 1.250 1.060 .692
RV-9931 No 1.080 60 @ 1.500 122 @ 1.000 .875 .565
RV-9933 No 1.080 75 @ 1.680 154 @ 1.087 1.000 .627
RV-9930 No 1.133 73 @ 1.620 148 @ 1.125 1.015 .440
RV-9913X Yes 1.235 90 @ 1.700 255 @ 1.200 1.150 .490
RV-880X Yes 1.250 80 @ 1.700 200 @ 1.250 1.150 .490
RV-943X Yes 1.250 110 @ 1.700 285 @ 1.210 1.160 .490 RVK-943X
ICE600943X (Black Ice) Yes 1.250 110 @ 1.700 285 @ 1.210 1.160 .490
RV-1943X Yes 1.250 125 @ 1.750 325 @ 1.200 1.160 .550
ICE601943X (Black Ice) Yes 1.250 125 @ 1.750 325 @ 1.200 1.160 .550
RV-9943X Yes 1.255 114 @ 1.700 340 @ 1.200 1.153 .487
RV-9914X Yes 1.260 125 @ 1.750 325 @ 1.200 1.160 .530
RV-9915X Yes 1.260 130 @ 1.800 350 @ 1.200 1.160 .580
RV-9910X Yes 1.435 110 @ 1.700 300 @ 1.150 1.100 .540
RV-9934 No 1.437 107 @ 1.531 235 @ 1.031 .920 .551
RV-9905X Yes 1.440 100 @ 1.530 250 @ 1.030 .925 .500 RVK-9905
RV-9928X Yes 1.440 105 @ 1.750 205 @ 1.250 1.090 .600
RV-9932X Yes 1.440 82 @ 1.880 154 @ 1.480 1.090 .730
RV-9939 No 1.440 95 @ 1.703 260 @ 1.200 1.080 .560
ICE609939 (Black Ice) No 1.440 95 @ 1.703 260 @ 1.200 1.080 .560
RV-9912X Yes 1.460 115 @ 1.820 245 @ 1.320 1.150 .610 RVK-9912
ICE609912X (Black Ice) Yes 1.460 115 @ 1.820 245 @ 1.320 1.150 .610
RV-9942X Yes 1.460 110 @ 1.550 303 @ 1.110 .935 .605
RV-9947X Yes 1.475 110 @ 1.800 260 @ 1.300 1.200 .540
RV-9908X Yes 1.494 95 @ 1.650 270 @ 1.200 1.085 .505
RV-9940X Yes 1.500 95 @ 1.625 280 @ 1.150 1.000 .565
RV-9941X Yes 1.500 121 @ 1.800 298 @ 1.300 1.130 .660
RV-9907X Yes 1.504 90 @ 1.880 265 @ 1.380 1.265 .555
RV-9935 No 1.514 131 @ 1.750 240 @ 1.250 1.175 .515
RV-9959X Yes 1.522 109 @ 1.820 323 @ 1.320 1.270 .490
RV-9911X Yes 1.539 135 @ 1.875 305 @ 1.350 1.160 .655
RV-9929X Yes 1.539 132 @ 1.937 289 @ 1.375 1.165 .712
See front pages for details on Black Ice products.

Conical Springs
Coil Max. Spring /
Part Number Damper O.D. Closed Load Open Load
Bind Lift Retainer Kit
RV-9954 No 1.061 93 @ 1.570 198 @ 1.020 .952 .550
RV-9955 No 1.105 90 @ 1.470 252 @ .970 .900 .500
RV-9951 No 1.290 105 @ 1.800 265 @ 1.200 1.130 .600 RVK-9951
RV-9937 No 1.290 130 @ 1.800 318 @ 1.200 1.120 .600 RVK-9937
ICE609937 (Black Ice) No 1.290 130 @ 1.800 318 @ 1.200 1.120 .600

See front pages for details on Black Ice products.

60. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Valve Springs
Dual Springs
Coil Max. Spring /
Part Number Damper O.D. Closed Load Open Load
Bind Lift Retainer Kit
RV-9953Y No 1.298 148 @ 1.800 413 @ 1.150 1.060 .650
RV-9961Y No 1.374 135 @ 1.750 304 @ 1.200 1.097 .593
RV-9919Y No 1.384 115 @ 1.625 220 @ 1.150 .950 .615
RV-9963Y No 1.385 161 @ 1.850 430 @ 1.250 1.195 .595
RV-9958Y No 1.432 115 @ 1.750 310@ 1.264 1.224 .485
RV-9902Z Yes 1.437 120 @ 1.800 325 @ 1.250 1.100 .600 RVK-9902
RV-9903Z Yes 1.437 135 @ 1.800 360 @ 1.250 1.100 .660 RVK-9903
RV-9921Y No 1.437 165 @ 1.800 315 @ 1.300 1.100 .640
RV-9960Z Yes 1.446 117 @ 1.880 335 @ 1.320 1.220 .600
RV-9922Y No 1.460 120 @ 1.875 395 @ 1.175 1.080 .735
RV-9944Y No 1.460 130 @ 1.850 402 @ 1.150 1.080 .710
RV-9923Y No 1.470 110 @ 1.880 350 @ 1.330 1.250 .570
RV-1009Y No 1.501 105 @ 1.880 330 @ 1.380 1.280 .540
RV-9917Y No 1.515 140 @ 1.940 360 @ 1.300 1.200 .680
RV-9957Z Yes 1.532 148 @ 1.900 414 @ 1.250 1.150 .690
RV-9924Z Yes 1.540 190 @ 1.940 450 @ 1.375 1.200 .680
RV-9904Z Yes 1.550 145 @ 1.850 405 @ 1.200 1.120 .650 RVK-9904

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 61.

Valve Retainers
Valve Spring Retainers
Part Number A B C Angle Material Use with Valve Springs
ER-3994 .781 N/A .541 7 Stock RV-3567
ER-3991 .912 .620 .496 7 Stock RV-3561
ER-3992 .982 .588 .526 7 Stock
ER-3990 1.030 .640 N/A 7 4140 RV-9937, RV-9951
ICE103990 (Black Ice) 1.030 .640 N/A 7 4140 RV-9937, RV-9951
ER-3993 1.039 .609 N/A 7 4140 RV-3504
ER-3988 1.125 .855 .640 7 4140 RV-9914X, RV-9915X
ER-3974 1.200 .800 .650 7 1008 RV-880X, RV-943X
ICE103974 (Black Ice) 1.200 .800 .650 7 1008
ER-3975 1.200 .870 .690 7 4140 RV-943X, RV-1943X*
ICE103975 (Black Ice) 1.200 .870 .690 7 4140
ER-3976 1.200 .870 .690 7 4140 RV-1943X**
ER-3981 1.203 .867 .607 7 4140 RV-9906X, RV-9909X, RV-9913X
ER-3979 1.225 .850 .650 7 4140 RV-9906X, RV-9909X, RV-9913X, RV-9914X
ER-3980 1.375 1.075 .792 7 4140 RV-9912X, RV-9916Y
ER-3982 1.375 1.060 .675 7 4140 RV-9905X, RV-9912X, RV-9916Y***
ICE103982 (Black Ice) 1.375 1.060 .675 7 4140
ER-3983 1.375 1.060 .675 7 4140 RV-9908X, RV-9910X
ER-3985 1.375 1.075 .792 7 4140 RV-9918Y
ER-3989 1.400 1.060 .690 10 4140 RV-9921Y
ER-3977 1.405 1.045 .705 7 4140 RV-9901Z, RV-9902Z, RV-9903Z
ICE103977 (Black Ice) 1.405 1.045 .705 7 4140
ER-3978 1.405 1.125 .740 7 4140 RV-9904Z
ER-3986 1.500 1.135 .635 7 4140 RV-9911X
ER-3987 1.500 1.135 .725 7 4140 RV-9917Y, RV-9924Z

* - Must Use +.100” long valves to use RV-1943X with ER-3975 Add ‘K’ to part number for a Skin Pack of 16
** - Must use stock length valves to use RV-1943X with ER-3976 Add ‘S’ to part number for a Poly-Bag of 16
*** - With +.040” installed height

See front pages for details on Black Ice products.

Valve Spring/Retainer Kits

Boxed Kit of 16 Skin Pack of 8 Components
RVK-943XS RVK-943K RV-943X, ER-3974
RVK-9900S RVK-9900K RV-943X, ER-3975
RVK-9902S RVK-9902K RV-9902Z, ER-3977
RVK-9903S RVK-9903K RV-9903Z, ER-3977
RVK-9904S RVK-9904K RV-9904Z, ER-3978
RVK-9905XS RVK-9905XK RV-9905X, ER-3982
RVK-9912XS RVK-9912XK RV-9912X, ER-3982
RVK-9937S RVK-9937K RV-9937, ER-3990
RVK-9951S RVK-9951K RV-9951, ER-3990

62. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Valve Locks
Stamped 7° Valve Locks
Part Number Stem Dia. Grooves
EHC-206 7mm Ford 3
EHC-555 11/32” 1
EHC-613 3/8” 1
EHC-746 3/8” Int. 2
EHC-766 3/8” Exh. 4
EHC-2783 8mm LS1 1
EHC-2795 6mm Ford 3
EHC-2799 5/16” Hemi 3
EHC-2822 6mm GM/Audi/VW 3

Variable Height Valve Locks

Installed
Part Number Stem Dia. Grooves
Height
EHC-1030 11/32” 1 - .030”
EHC-1060 11/32” 1 - .060”
EHC-1050 11/32” 1 + .050”
EHC-2060 3/8” 1 - .060”

Elgin Industries proudly supports and is a long-standing

member of these industry associations:

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 63.

Valve Spring Inserts
Listed By Outside Diameter
Part Number O.D. I.D. Thickness Elgin VSI’s correct assembled valve
VSC106HP 1.100 .719 .015 pressure and height.
VSA105HP 1.218 .875 .060
VSB105HP 1.218 .875 .030 Serrated to retard heat transfer.
VSC105HP 1.218 .875 .015 Manufactured from the finest quality
VSB107HP 1.250 .625 .030 shim stock.
VSC107HP 1.250 .625 .015
VSA203HP 1.250 .812 .060
Available in three different thicknesses
VSB203HP 1.250 .812 .030 to achieve correct spring height.
VSC203HP 1.250 .812 .015
VSA201HP 1.250 .875 .060
VSB201HP 1.250 .875 .030
VSC201HP 1.250 .875 .015
VSA102HP 1.360 1.000 .060
VSA502HP* 1.360 1.000 .060
VSB102HP 1.360 1.000 .030
VSC102HP 1.360 1.000 .015
VSC301HP 1.375 .765 .015
VSA306HP 1.437 .645 .060
VSB306HP 1.437 .645 .030
VSC306HP 1.437 .645 .015
VSA305HP 1.437 .765 .060
VSB305HP 1.437 .765 .030
VSC305HP 1.437 .765 .015
VSA303HP 1.480 .703 .060
VSB303HP 1.480 .703 .030
VSC303HP 1.480 .703 .015
VSC602HP 1.480 .765 .015
VSA506HP* 1.500 .645 .060
VSA103HP 1.500 1.031 .060
VSB103HP 1.500 1.031 .030
VSC103HP 1.500 1.031 .015
VSC601HP 1.640 .635 .015

* 500 series come in .060” thickness only and have a lip on outer edge
to prevent spring walk.

64. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Valves
Elgin Pro Stock high performance valves forged
from 21-4N stainless steel and feature hardened
tips (55 RC min.) to eliminate the need for lash
caps. The chrome plated valves provide excellent
resistance to wear and corrosion and reducing
friction. Undercut stems to improve airflow or
straight stems for an OEM look. Some are available
with +.100” lengths.

Elgin high performance valves are a perfect choice

for street performance upgrades and mild race
applications at a great value.

Chevrolet Small Block 1 Piece Valves

Head Stem Overall Install Chrome Seal
Part Number Type Stem Type
Dia. Dia. Length Height Stem Groove
HPV-1 1.500 11/32 4.910 Stock Exh Straight Yes No
HPV-2 1.500 11/32 4.910 Stock Exh Straight Yes Yes
HPV-35 1.500 11/32 4.910 Stock Exh Undercut Yes No
ICE700035 (Black Ice) 1.500 11/32 4.910 Stock Exh Undercut Yes No
HPV-44 1.500 11/32 4.910 Stock Exh Straight No Yes
HPV-3 1.600 11/32 4.910 Stock Exh Not Fully Mach. Yes Yes
HPV-4 1.600 11/32 4.910 Stock Exh Undercut Yes Yes
HPV-5 1.600 11/32 4.910 Stock Exh Undercut Yes No
ICE700005 (Black Ice) 1.600 11/32 4.910 Stock Exh Undercut Yes No
HPV-43 1.600 11/32 4.910 Stock Exh Straight No Yes
HPV-45 1.600 11/32 4.910 Stock Exh Straight Yes No
ICE700045 (Black Ice) 1.600 11/32 4.910 Stock Exh Straight Yes No
HPV-6 1.600 11/32 5.025 +.100” Exh Undercut Yes No
ICE700006 (Black Ice) 1.600 11/32 5.025 +.100” Exh Undercut Yes No
HPV-7 1.625 11/32 4.910 Stock Exh Undercut Yes No
HPV-8 1.625 11/32 5.025 +.100” Exh Undercut Yes No
HPV-9 1.940 11/32 4.910 Stock Int Straight Yes No
ICE700009 (Black Ice) 1.940 11/32 4.910 Stock Int Straight Yes No
HPV-10 1.940 11/32 4.910 Stock Int Straight Yes Yes
HPV-34 1.940 11/32 4.910 Stock Int Undercut Yes No
ICE700034 (Black Ice) 1.940 11/32 4.910 Stock Int Undercut Yes No
HPV-41 1.940 11/32 4.910 Stock Int Straight No Yes
HPV-11 2.020 11/32 4.910 Stock Int Not Fully Mach. Yes Yes
HPV-12 2.020 11/32 4.910 Stock Int Undercut Yes Yes
HPV-13 2.020 11/32 4.910 Stock Int Undercut Yes No
ICE700013 (Black Ice) 2.020 11/32 4.910 Stock Int Undercut Yes No
HPV-40 2.020 11/32 4.910 Stock Int Straight No Yes
HPV-46 2.020 11/32 4.910 Stock Int Straight Yes No
ICE700046 (Black Ice) 2.020 11/32 4.910 Stock Int Straight Yes No
HPV-14 2.020 11/32 5.025 +.100” Int Undercut Yes No
ICE700014 (Black Ice) 2.020 11/32 5.025 +.100” Int Undercut Yes No
HPV-15 2.055 11/32 4.910 Stock Int Undercut Yes No
HPV-36 2.055 11/32 5.025 +.100” Int Undercut Yes No
HPV-37 2.080 11/32 5.025 +.100” Int Undercut Yes No
HPV-38 2.125 11/32 5.025 +.100” Int Undercut Yes No

See front pages for details on Black Ice products.

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 65.

Valves
Chevrolet Small Block 2 Piece Valves
Head Stem Overall Install Chrome Seal
Part Number Type Stem Type
Dia. Dia. Length Height Stem Groove
HPV-32 1.500 11/32 4.910 Stock Exh Straight Yes Yes
HPV-28 1.600 11/32 4.910 Stock Exh Undercut Yes Yes
HPV-29 1.600 11/32 4.910 Stock Exh Straight Yes Yes
HPV-33 1.940 11/32 4.910 Stock Int Straight Yes Yes
HPV-30 2.020 11/32 4.910 Stock Int Undercut Yes Yes
HPV-31 2.020 11/32 4.910 Stock Int Straight Yes Yes

Chevrolet Big Block 1 Piece Valves

Head Stem Overall Install Chrome Seal
Part Number Type Stem Type
Dia. Dia. Length Height Stem Groove
HPV-16 1.725 3/8 5.375 Stock Exh Straight Yes No
HPV-17 1.725 3/8 5.375 Stock Exh Undercut Yes No
HPV-18 1.880 3/8 5.375 Stock Exh Straight Yes No
HPV-19 1.880 3/8 5.375 Stock Exh Undercut Yes No
HPV-20 1.880 11/32 5.520 +.100” Exh Undercut Yes No
HPV-21 1.940 11/32 5.520 +.100” Exh Undercut Yes No
HPV-22 2.065 3/8 5.220 Stock Int Undercut Yes No
HPV-23 2.190 3/8 5.220 Stock Int Straight Yes No
HPV-24 2.190 3/8 5.220 Stock Int Undercut Yes No
HPV-25 2.190 11/32 5.345 +.100” Int Undercut Yes No
HPV-26 2.250 3/8 5.220 Stock Int Undercut Yes No
HPV-27 2.250 11/32 5.345 +.100” Int Undercut Yes No

General Motors LS1 1 Piece Valves

Head Stem Overall Install Chrome Seal
Part Number Type Stem Type
Dia. Dia. Length Height Stem Groove
HPV-76 1.570 8 mm 4.890 Stock Exh Undercut Yes No
HPV-78 1.600 8 mm 4.910 Stock Exh Undercut Yes No
ICE700076 (Black Ice) 1.570 8 mm 4.890 Stock Exh Undercut Yes No
HPV-74 2.020 8 mm 4.880 Stock Int Undercut Yes No
ICE700074 (Black Ice) 2.020 8 mm 4.880 Stock Int Undercut Yes No
HPV-75 2.080 8 mm 4.880 Stock Int Undercut Yes No
HPV-83 2.165 8 mm 4.890 Stock Int Undercut Yes No

66. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Valve Guides & Stem Seals
Cast Iron Valve Guides Metal Clad Seals
Part Spiral Part Stem Guide Seal
I.D. O.D. Length Material
Number Grooved Number Dia. Dia. O.D.
55118 .343 .502 2.250 No *EOS-4902 6 mm .476 .571 Viton
57118 .343 .502 2.250 Yes EOS-4910 7 mm .432 .565 Viton
55031 .343 .502 2.375 No EOS-4914 7 mm .455 .550 Viton
57108 .343 .502 2.375 Yes EOS-4912 7 mm .474 .574 Viton
55027 .344 .502 2.125 No *EOS-4921 5/16 .476 .562 Viton
57027G .344 .502 2.125 Yes *EOS-4925 5/16 .500 .546 Viton
55005 .344 .502 2.250 No EOS-4923 5/16 .502 .623 Viton
57005 .344 .502 2.250 Yes EOS-2100 5/16 .531 .677 Viton
55006 .344 .502 2.375 No EOS-4934 5/16 .472 .582 Viton
57006 .344 .502 2.375 Yes EOS-2101 11/32 .500 .620 Viton
55017 .374 .502 2.375 No *EOS-4930 11/32 .500 .546 Viton
57017 .374 .502 2.375 Yes EOS-4932 11/32 .531 .674 Viton
55016 .374 .502 2.625 No EOS-806 11/32 .562 .660 Viton
55021 .375 .502 2.500 No EOS-4941 3/8 .500 .623 Viton
57021 .375 .502 2.500 Yes EOS-4942 3/8 .531 .677 Viton
EOS-4943 3/8 .562 .661 Viton
EOS-9021 3/8 .625 .741 Viton
Bronze Valve Guides * = Plain metal skirt I.D.

Part Spiral
I.D. O.D. Length
Number Grooved
51032-B .342 .502 3.063 No
Ring and Band Seals
51034-B .343 .502 2.125 No Part Stem Guide Seal
55005-B Material
.343 .502 2.250 No Number Dia. Dia. O.D.
51029-B .343 .502 2.500 No
EOS-821 5/16 .480 .614 Viton
55017-B .373 .502 2.375 No
EOS-830VT 5/16 .500 .633 Viton
EOS-4356 5/16 .530 .663 Viton

Hardened Valve Guides EOS-810

EOS-938
11/32
11/32
.500
.562
.628
.692
Viton
Viton
EOS-9124
Part Spiral 11/32 .531 .711 Viton
I.D. O.D. Length EOS-4368 3/8 .640 .740 Viton
Number Grooved
556896 .312 .439 2.875 Yes
559977 .312 .502 2.281 Yes
559460 .343 .502 2.500 Yes
559607 .344 .502 2.250 Yes
559523 .344 .502 3.063 Yes
559964 .373 .502 2.625 Yes
559458 .374 .502 3.063 Yes

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 67.

Timing
Elgin ProStock offers a comprehensive line of high performance timing sets with coverage of all the leading
high performance engines. Each set features the highest quality and workmanship to ensure the ultimate in
performance, durability and value.

Elgin’s 2100 and 3100 series sets are available with a chrome-moly 9 keyway crankshaft gear and cast
camshaft gear. A 3 keyway steel crankshaft gear with a cast camshaft gear is also available. The 3100 series
also has an option for all steel gears with a Torrington-type bearing. All sets feature a pre-stressed, .250”
seamless roller chain to reduce stretching after installation and delivering smooth performance and
exceptional durability.

Elgin recommends installing your

timing set “straight up”, with the
dot on the cam gear in the 6 o’clock
position and the dot on the crank
gear in the 12 o’clock position.
Precise alignment of the gears is
crucial to get the most out of the
camshafts performance.

Advancing the timing will result in more low-end power and retarding the cam will achieve more top-end
power and higher RPM’s. Many of Elgin’s camshafts have some degree of advance built into them so it is
recommended to check the cam specifications so you don’t rob the camshaft of power and performance. To
determine if the camshaft has advance built in, simply subtract the intake centerline from the lobe separation
angle. If the cam does have advance built in, you should install it straight up (dot-to-dot).

Advancing or retarding of the timing

of the camshaft can be achieved by
installing the crank gear to the specific
keyways cut in the gear. Generally by 4
degrees in a 3 keyway crank gear or in
increments of 2 degree in a 9 keyway
gear. Carefully follow the instructions
included with the timing set.

68. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Timing
9 Keyway Timing Sets
All Elgin PRO STOCK 9 Keyway Crank Sprockets are cut from 4140 Chrome Moly aircraft quality steel and
hardened to 55 RC to maximize resistance to premature wear, offering the finest performance available. The 9
keyways represent two degree increments (in crankshaft degrees) to accurately time your performance engine
as shown below.

0 = Standard Keyway
R2 = 2 Retard A2 = 2 Advanced
R4 = 4 Retard A4 = 4 Advanced
R6 = 6 Retard A6 = 6 Advanced
R8 = 8 Retard A8 = 8 Advanced

Speed Set Crank Cam

Mfg. Application Years Type
Part Number Gear Gear
Small Block (Excl. Roller Cam) 55-96 SS-2100-9 Steel Cast Roller
Chevrolet Small Block (Excl. Roller Cam) 55-96 SS-3100-9 Steel Cast True-Roller
Big Block Gen VI 96-00 SS-3537STA-9 Steel Steel True-Roller
Chrysler Hemi (5.7L) w/Torrington Bearing 02-12 SS-3505ST-9 Steel Steel True-Roller
LS1 (5.7L) 99-04 SS-3533STA-9 Steel Steel True-Roller
LS1 (5.7L) 1 Sensor, 3 Bolt Cam 05 SS-3534STA-9 Steel Steel True-Roller
LS2 (6.0L) 1 Sensor, 3 Bolt Cam 05 SS-3534STA-9 Steel Steel True-Roller
General Motors LS2 (6.0L) 4 Sensor, 3 Bolt Cam 06-07 SS-3536STA-9 Steel Steel True-Roller
LS2 (6.0L) 4 Sensor, 1 Bolt Cam 07-10 SS-3673STA-9 Steel Steel True-Roller
LS3 (6.2L) w/Torrington Bearing 08-10 SS-3673STA-9 Steel Steel True-Roller
LS7 (7.0L) w/Torrington Bearing 06-10 SS-3667STA-9 Steel Steel True-Roller

All Steel Roller Sets

• 3 Keyway Steel Crank Gear
• Steel Cam Gear
Chevrolet • Roller Chain True-Type
Application Years Part Number
V8: Small Block 262 - 400 3 Keyway w/Torrington Bearing 1955-96 SS-3100STA*

* - Use with Cam Button

Add a K for a Skin Packaged Roller Speed Set

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 69.

Timing
• 3 Keyway Steel Crank Gear
2100 Series • Cast Iron Cam Gear
• Solid Roller Chain
Mfg. Application Years Part Number
V6: 200, 229, 262 (4.3Z) 1978-96 SS-2100
Chevrolet V8: 262, 265, 267, 283, 302, 305G, H, 307, 327, 350L, 400 w/2BC (Excl. Roller Cam) 1955-96 SS-2100
V8: 396, 400 w/4BC, 402, 427, 454 1965-98 SS-2110

• 3 Keyway Steel Crank Gear

3100 Series • Cast Iron Cam Gear
• Roller Chain True-Type
Mfg. Application Years Part Number
AMC V8: 290, 304, 343, 360, 390, 401 1967-79 SS-3118
V6: 181, 196, 231, 231A, 252 Turbo w/Int. Dist. Dr. (RWD only) 1975-88 SS-3134
V6: 198, 225, 231 w/o Int. Dist. Dr. 1962-82 SS-3132
Buick
V8: 215, 300, 340, 350H, J, X 1962-82 SS-3132
V8: 400, 435, 455 1967-76 SS-3144ST
V6: 173 (2.8-S, X, Z), (3.1T Camaro) 1980-91 SS-3137
V6: 200, 229, 262 (4.3Z) 1978-96 SS-3100
V6: Truck (4.3L-W, X) w/Balance Shaft 1992-98 SS-3154
V8: 262, 265, 267, 283, 302, 305G, H, 307, 327, 350L, 400 w/2BC (Excl. Roller Cam) 1955-96 SS-3100
Chevrolet V8: 305 (5.0-E,F), 350 (5.7-7, 5.7-8) w/Factory Roller Cam 1985-02 SS-3145
V8: Small Block “Rocket” Raised Cam & S/B Crank Snout All SS-3146
V8: Chevy S/B “Vortec” 350 (5.7L) ½” Pitch Single Roller Chain 1996-02 SS-3157
V8: LT1/LT4 (Vented Opti-Spark) (4.3L, 5.7L-P, 5) ½” Pitch Single Roller Chain 1994-97 SS-3151
V8: 396, 400 w/4BC, 402, 427, 454 Non-Factory Roller Cam 1965-98 SS-3110
V8: 273, 315, 318, 325, 326, 340, 354, 360, 392 1956-91 SS-3103
Chrysler V8: 361, 383, 400, 426W, 426 Hemi, 440 w/Single Bolt Cam 1956-78 SS-3104
V8: 361, 383, 400, 426W, 426 Hemi, 440 w/Three Bolt Cam 1956-78 SS-3125
V8: 255, 289 Std, 302 Std, 302 Boss, 351W Std, 351W HO (to 3/21/84) 1965-84 SS-3135
V8: 302, 351W (from 3/21/84) (w/ 2 pc. fuel ecc) 1984-01 SS-3138
Ford V8: 351C, 351M, 400 1970-82 SS-3121
V8: 352, 390, 410, 427, 428 1964-74 SS-3108
V8: 429, 460 Std 1972-87 SS-3130
Oldsmobile V8: 260F, 307, 330, 350R, 400, 403, 425, 455 1965-87 SS-3113
Pontiac V8: 287, 316, 326, 347, 350P, 370, 389, 400, 421, 428, 455 1955-79 SS-3112

Add a K for a Skin Packaged Roller Speed Set

70. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Oil Pumps
Elgin PRO STOCK oil pumps are 100% new and proven to protect the integrity of the lubrication system.
Elgin PRO STOCK offers both High Volume (HV) or High Pressure (HP) pumps to satisfy the demands
of your engines’ requirements.

High Volume (HV) pumps

are 100% pressure tested
and dyno’d to ensure
20-28% greater volume
(at the same pressure)
as stock units for
exceptional performance
and engine protection.

High Pressure (HP) pumps

are the best choice for ultra-
high performance applications
requiring consistent pump
pressure. These pumps are fully
pressure tested and hand turned
before they earn their way into
an Elgin PRO STOCK box. (When
using an HP pump, carefully
match the oil viscosity to the
needs of the engine).

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 71.

Oil Pumps
High Pressure Oil Pumps
Mfg. Application Part Number
Chrysler 318, 350, 361, 383, 400, 413, 426, 440 EM-63HP
260, 289, 302 EM-68A
Ford Repair Kit for EM-68A EK-68A
332, 352, 360, 361, 383, 390, 406, 427, 428, 430, 462 EM-57HP
General Motors LS Engines, Standard Volume. Use w/ 7/8” Bolt-on Screen EM-1295
Pontiac 400 Ram Air (’69-70), 455 (More Pressure than EM-54D-S) EM-54F

High Volume Oil Pumps

Mfg. Application Part Number
199, 232, 258 AMC EM-81AHV-S4*
AMC/Jeep
232, 258 Jeep EM-81AHV-S3*
153,194, 215, 230, 250, 292 EM-62HV
173, 189 (1st Design w/15.9mm oil pickup tube) EM-95HV
173, 189, 207 (2nd Design w/19.0 mm oil pickup tube), 213 EM-134HV
1993-96 262, 1993-02 305, 350 Small Block (Must use IS-55E Intermediate Shaft w/Steel Guide)
EM-155HV
3/4” dia. pickup tube.
302, 350 w/HP & SHP; 409 w/Dual 4BC HP EM-55A
Chevrolet Small Block (Excl. Chevy II’s & ’93 Truck w/305 Eng. C & K 1,2,3) Must use IS-55E Intermediate
EM-55HV
Shaft w/Steel Guide w/5/8” dia. pickup tubes.
Small Block: More Volume & Pressure than EM-55HV Must use IS-55E Intermediate Shaft w/
EM-99HV-S*
Steel Guide. May require cutting pan baffles.
Big Block (Must use IS-77 Intermediate Shaft w/Steel Guide) (May require minor modification on
EM-77HV
4 bolt main, Gen IV Block in 1988-94 application)
EM-95HV w/Screen EM-95HV-S3*
135 (Must use 118-S screen), 153 EM-118
170, 198, 225 EM-66HV
Chrysler
239, 273, 318, 340, 360 EM-72HV
318, 350, 361, 383, 400, 413, 426, 440 (Excl. W-300) EM-63HV
122-140 Do not use with alum. pan. EM-86CHV
221, 255, 260, 289, 302 EM-68HV
240, 300 EM-74HV
330 (5.4L) 3 Valve EM-360HV
330 MD-330 HD w/Velocity Governor-332, 352, 360, 361, 383, 390, 410, 427, 428 (Excl. Police,
EM-57HV
Cobra/Super Cobra Jet), 430, 462
Ford 351W EM-83HV
351C, 351M, 400 EM-84AHV
370, 429, 460 Trucks EM-84DHV
429, 460 (Excl. Police, Cobra Jet/Super Cobra Jet) (Use w/oil pan depth of 8-1/4”. May require
EM-84BHV-S*
minor modification of oil pan. Pump has bolt on pickup screen assembly)
429, 460 (Police, Cobra Jet/Super Cobra Jet) (Use w/oil pan depth of 8-5/8”. May require minor
EM-84EHV-S*
modification of oil pan. Pump has bolt on pickup screen assembly)
General Motors LS Engines, Standard Pressure. Use w/7/8” Bolt-on Screen EM-1296
260, 307, 330, 350, 350N, 394, 400, 403, 425, 455 (Pump is manufactured with a bolt on type
Oldsmoblie flange & a chamfered hole. Either a bolt on or press in screen can be used. Can be used in either EM-22FHV
FWD or RWD depending upon the screen used.)
151 ’77-78 EM-62BHV
Pontiac 151 ’79-93 EM-62CHV
194, 265, 301, 326, 350, 389, 400, 421, 428, 455 EM-54D-S*

* - Includes Screen

72. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Oil Pumps
High Volume Oil Pump Repair Kits
Mfg. Application Part Number
196, 225, 231, 252, 300, 340, 350B, H, J, X
Kit includes longer gears, spacer, gaskets, springs, and instructions. May require timing cover EK-20IHV
removal for installation. Requires hand tools & drill (drill bit is included) to install.
EK-20IHV Kit +EP-20I Thrust Plate Kit EK-20IPHV
Buick
400, 430, 455
Kit includes longer gears, spacer, gaskets, springs, and instructions. May require timing cover EK-20JHV
removal for installation. Requires hand tools & drill (drill bit is included) to install.
EK-20JHV Kit +EP-20I Thrust Plate Kit EK-20JPHV

Gear Thrust Plate Kits

Mfg. Application Part Number
Provides new wearing surface for EK-20I, EK-20J, EK-20IHV, & EK-20
EP-20I
Kit includes cast iron thrust plate, mounting gasket, proper length screws & instruction sheet.
Buick
Provides new wearing surface for EK-20L & EK-20LHV
EP-20L
Kit includes cast iron thrust plate, mounting gasket, proper length screws & instruction sheet.

High Volume Repair Kits

Gear Thrust Plate Kits

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 73.

Head Bolt Kits
Over the past few years, Elgin has partnered with several OE Tier-One head bolt suppliers to offer the OEM
approved head bolts, for many late model engines, to the aftermarket. These partnerships ensure that when
you purchase an Elgin head bolt set, you will receive an OE quality replacement part, MADE IN THE USA.

Torque-to yield bolts:

Most engines these days use these

types of bolts right from the factory.
Torque-to-yield means that after
torqueing to manufacturer specs, the
bolts are stretched to their maximum
limit and the bolt becomes permanently
stretched, losing it’s clamping force.

***Do NOT re-use torque-to-yield

bolts!!!!! 100% replacement is required
to avoid failure and costly repairs.***

Boxed Skin Pack Boxed

Mfg. Application
Complete Eng. One Head One Head
Small Block w/O.E. Cast Iron/Aluminum Heads EHC-99S EHC-99K EHC-99S-1
Chevrolet Big Block w/O.E. Cast Iron/Aluminum Heads & Early EHC-201S EHC-201K EHC-201S-1
Bowtie Heads
2.2L Turbo ’85-94 EHC-106S EHC-106K*
3.6L Pentastar EHC-141S EHC-141S-1
Chrysler/Dodge/
4.7L ’98-10 EHC-126S EHC-126S-1
Jeep
5.7L Hemi ’03-12 EHC-120S EHC-120S-1
5.9L, 6.7L Diesel ’98-09 EHC-125S EHC-125S-1
2.7L, 3.0L Ecoboost EHC-144S EHC-144S-1
3.5L, 3.7L Duratec ‘09-13 EHC-133S EHC-133S-1
4.6L SOHC ’91-14 EHC-114S EHC-114K EHC-114S-1
5.0L ’92-01 EHC-116S EHC-116K EHC-116S-1
5.0L ’11-16 w/11mm Bolts EHC-138S EHC-138S-1
Ford
5.0L ’11-16 w/12mm Bolts EHC-137S EHC-137S-1
5.4L 24 Valve EHC-129S EHC-129S-1
6.0L, Power-Stroke Diesel EHC-128S EHC-128S-1
6.2L EHC-139S EHC-139S-1
6.4L Diesel EHC-143S EHC-143S-1
3.5L, 3.9L ’06-11 (Does not include bolt w/small head) EHC-127S EHC-127S-1
4.2L ’02-10 EHC-135S EHC-135K*
4.3L ’85-14 EHC-136S EHC-136S-1
4.3L Gen V ‘14 and up EHC-142S
General Motors 4.8L, 5.3L, 6.0L Vortec ’99-04 1st Design EHC-118S EHC-118K EHC-118S-1
4.8L, 5.3L, 6.0L Vortec ’05 and up 2nd Design EHC-131S EHC-131S-1
5.7L LS1 ’97-04 1st Design EHC-118S EHC-118K EHC-118S-1
5.7L LS1 ’04-05 2nd Design EHC-131S EHC-131S-1
8.1L EHC-140S EHC-140S-1

* Skin Packed Kit For Complete Eng.

74. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Main Bearing Cap Bolts
Elgin continues to expand coverage to our most recent product line additions. These bolts are a direct OE
replacement, manufactured in the USA and held to the same manufacturing processes and quality as the
original equipment manufacturers demand.

Main Bearing Cap Bolts

Mfg. Application Part Number OE Number
2.0L, 2.2L, 2.4L Ecotec Engs. EHC-1001 11571239

2.8L, 2.9L, 3.5L, 3.7L, 4.2L, Atlas Engs. EHC-1000 11569841

LS Engs., Gen III & IV, Inner Bolt EHC-1002 12560272

LS Engs., Gen III & IV, Outer Bolt w/Stud EHC-1006 12560273
GM
LS Engs., Gen III & IV, Side Bolt EHC-1003 12556127

LS Engs., Gen III & IV, Set of 10 ea. Inner, Outer and Side Bolts EHC-1007S

LS Engs., Gen V EHC-1004 11548075

LS Engs., Gen V EHC-1005 11548076

LS Engs., Gen V EHC-1010 11546565

11-19 3.5L FPS-139 HL3Z-6345A

Ford
11-19 3.5L FPS-140 HL3Z-6345B

Connecting Rod Bolts

Mfg. Application Part Number OE Number
GM LS Engs., '07-19 EHC-1008 11570662

Ford Ford 3.5L EHC-1009 5G5Z-6214A

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 75.

Expansion Plug Kits
Each Elgin PRO STOCK expansion plug kit includes every plug needed for the corresponding engine block.
Elgin brass plugs expand faster than the engine block to resist fallout, making them the perfect choice for
performance applications.

Part # Part #
Mfg. Application Year
Skin Pack Poly Bag
151 80-83 EP163B EP163BR
173 84-86 EP165B EP165BR
196, 199, 232, 258 59-90 EP116B EP116BR
AMC/Jeep
242 (4.0L) 87-02 EP256B EP256BR
285, 287 (4.7L) 99-03 EP836 EP836R
290, 304, 343, 360, 390, 401 66-98 EP117B EP117BR
181, 196, 231, 252 75-95 EP137B EP137BR
250 65-84 EP104B EP104BR
260 (V6), 307, 350R, N, 403 75-90 EP124B EP124BR
Buick
267, 305, 307, 350L 77-02 EP100B EP100BR
340, 350 66-80 EP118B EP118BR
425, 430, 455 63-76 EP119B EP119BR
150 79-92 EP163B EP163BR
153, 194, 230, 250, 262, 292 62-85 EP104B EP104BR
173 80-93 EP165B EP165BR
181, 196, 231, 231A, 252 76-95 EP137B EP137BR
232, 258 80-82 EP116B EP116BR
Chevrolet 260 Diesel, 307Y, 350N 80-90 EP124B EP124BR
262Z 85-04 EP185B EP185BR
267, 283, 302, 305, 307, 327, 350 57-02 EP100B EP100BR
366, 396, 400BB, 402, 427, 454 65-00 EP102B EP102BR
379, 395 Diesel 82-93 EP180B EP180BR
400SB 70-80 EP101B EP101BR
135, 153 81-02 EP176B EP176BR
170, 198, 225 60-87 EP112B EP112BR
201 (3.3L) 90-94 EP253B EP253BR
Chrysler 239 (3.9L) 87-97 EP258B EP258BR
273, 318, 340, 359, 360 57-03 EP113B EP113BR
285, 287 (4.7L) 00-03 EP836 EP836R
383, 400, 413, 426, 440 59-79 EP114B EP114BR
122, 140 (Exc HSC) 74-97 EP128B EP128BR
170, 200, 250 61-83 EP105B EP105BR
Ford 171 74-86 EP129B EP129BR
182 (3.0L) 86-97 EP252B EP252BR
221, 255, 260, 289, 302, 351W 62-01 EP108B EP108BR

76. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Expansion Plug Kits

Part # Part #
Mfg. Application Year
Skin Pack Poly Bag
223, 262 54-64 EP106B EP106BR
232 82-03 EP177B EP177BR
240, 300 65-96 EP107B EP107BR
245 (4.0L) 90-03 EP278B EP278BR
281 (4.6L) VIN W 92-02 EP280 EP280R
Ford
330, 352, 360, 361, 389, 390, 427, 428, SCJ 57-78 EP110B EP110BR
330 (5.4L) DOHC 32 Valve Mustang 05-07 EP610 EP610R
351C, 351M, 400 70-82 EP109B EP109BR
370, 429, 460 68-99 EP125B EP125BR
445 (7.3L) Diesel 88-96 EP229B EP229BR
262N, Z 85-04 EP185B EP185BR
GMC Truck 305, 351, 401M 60-75 EP121B EP121BR
379 Diesel 82-93 EP180B EP180BR
151 77-93 EP163B EP163BR
173 80-93 EP165B EP165BR
181, 196, 231, 252 76-95 EP137B EP137BR
Oldsmobile
250 66-84 EP104B EP104BR
260 Diesel, 260F, 8, 307Y, 330, 350N, 350R, 400, 403, 425, 455 64-90 EP124B EP124BR
267J, 305 77-02 EP100B EP100BR
151 77-93 EP163B EP163BR
173 80-93 EP165B EP165BR
181, 196, 231, 252 76-95 EP137B EP137BR
230, 250 63-84 EP104B EP104BR
Pontiac 260, 350N, 350R, 403 77-85 EP124B EP124BR
262Z 85-96 EP185B EP185BR
267, 305, 307, 350L 71-02 EP100B EP100BR
326, 350P, 389, 400, 421, 428, 455 59-79 EP115B EP115BR
350B, J, X 68-81 EP118B EP118BR

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 77.

Harmonic Balancers
Elgin® Harmonic Balancers provide true OE-style designs and materials that match the unique needs of
each engine. Our harmonic balancers are new – never reconditioned – which ensures the best performance
and value for every application. Our bolt kits feature Grade 8 bolts and washers and an extra thick parallel
ground washer.

Application Year Part Number OEM Number

Buick, Oldsmobile, Pontiac - 3.3L (204) 93 EDA-2323 24503067
Buick, Cadillac, Oldsmobile, Pontiac - 307, 350, 403, 455 68-86 EDA-4552 417142
Chevrolet - 2.8L (173) 88-93 EDA-1890 14100630
Chevrolet/GMC Truck/Oldsmobile - 4.3L (262) 85-95 EDA-2621 10172764
Chevrolet - 305, 350 7.00” O.D. 72-94 EDA-3071 12551537
Chevrolet - 305, 350 7.00” O.D. (Heavy Duty) 72-94 EDA-3071HD 12551537
Chevrolet/GMC Truck - 5.0L (307) 69-75 EDA-3270 6272223
Chevrolet/GMC Truck - 5.7L (350) 8.00” O.D. Internal Balance 69-95 EDA-3502 6272222
Chevrolet/GMC Truck - 5.7L (350) 77-86 EDA-3504 458652
Chevrolet/GMC Truck - 5.7L (350) 96-02 EDA-3506 10243271
Chevrolet - 396, 402, 427 7.00” O.D. 65-69 EDA-396 386008
Chevrolet - 396, 402, 427 8.00” O.D. Internal Balance 65-70 EDA-427
Chevrolet/GMC Truck - 6.6L (400) 8.00” O.D. External Balance 70-80 EDA-400 6272225
Chevrolet - Big Block 454 8.00” O.D. External Balance 70-89 EDA-4541 10141212
Chevrolet/GMC Truck - 7.4L (454) 91-93 EDA-4542 10101160
Ford - 5.0L (302) 70-80 EDA-3022 D8TZ6316B
Ford - 5.0L (302) 84-95 EDA-3021 E4TZ6316A
Ford - 351W w/3 Bolt Raised Pulley 68-73 EDA-2008 C8AZ6316A
Ford - 351W w/3 Bolt Countersunk Pulley (Heavy Duty) 69-73 EDA-2009HD C9OZ6316A
Ford - 5.8L (351W) 88-97 EDA-3513 E8TZ6316B
Ford - 7.3L Diesel 88-94 EDA-4451 E8TZ6316A
Pontiac - All 301-455 V8 Engines (Heavy Duty) 68-77 EDA-4551HD 477682
Toyota - 3SFE, 3SF Camry, Celica 87-92 EDA-20 1340874020

Look for these common signs that the

Harmonic Balancer Bolt Kits harmonic balancer must be replaced:
Application Kit Number • Front main seal leak
Chevrolet Small Block HB12S • Excessive engine vibration
Chevrolet Big Block HB13S • Inability to set ignition timing
• Deterioration of rubber between outer ring and hub
• Squealing or slipping belt drives
• Polished areas on pulley grooves

78. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Flexplates/Flywheels
Elgin® Flexplates are manufactured from high quality .140” thick high strength steel plate and are engineered
to exceed OE specifications. Our double-welded ring gears, dual bolt pattern and durable dichromate finish all
combine for superior performance and reliability.

Chevrolet Flexplates (OEM Type)

Outside # of
Application Year Part Number OEM Number Weight
Diameter Teeth
4.3L 90° V6 Small Block 10128414,
86-Present FP-5 14.13” 168 with Weight
V8 External Balance 14088761
471598,
Small Block V8, Exc. 400 67-85 FP-1 14.13” 168 w/o Weight
340296

Small Block V8, Exc. 400 69-85 FP-4 471529 12.85” 153 w/o Weight

400 External Balance 70-76 FP-2 340298 14.13” 168 with Weight

471598,
Big Block, Exc. 454 90 & Earlier FP-1 14.13” 168 w/o Weight
340296

454 External Balance 70-90 FP-3 343738 14.13” 168 with Weight

Flywheel / Flexplate Bolts

Set Includes
Application Year Set Number Size
Boxed
Flexplate Chevy 90° V6, V8 Prior to 86 FP-22S 7/16-20 x .680” 6 Bolts with lock washers

Flywheel Chevy 90° V6, V8

Prior to 86 FP-26S 7/16-20 x 1.000” 6 Bolts with lock washers
Ford V8
Flexplate Chevy 90° V6, V8
86-93 FP-29S 7/16-20 x .680” 6 Bolts
1 piece rear seal
Flywheel Chevy 90° V6, V8
86-93 FP-30S 7/16-20 x 1.000” 6 Bolts
1 piece rear seal

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 79.

Chassis – Coil Springs

Elgin has a complete line of stock

replacement Coil Springs for virtually
every classic car and truck rebuild.

Elgin coil springs are manufactured from

U.S.-grade steel wire and coated for
exceptional protection from corrosion and
road debris. Available designs range in free
height from 9” to 21” and load height from
6” to 16”. Available load ratings range from
175 to 6,000 pounds.

For specific application fitment, click on the

Coil Spring Catalog tab at www.elginind.com

80. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Chassis
Elgin Pro Stock not only keeps your engine running at peak performance but also has your steering and
suspension needs covered as well. Elgin Pro Stock has a complete line of chassis parts from classic muscle
cars, modern muscle cars, vintage vehicles, current models and everything in between.

Complete your restoration with Elgin Pro Stock

Front End Rebuild Kits

Our kits come with everything you need to restore your

classic vehicle and keep it running straight and smooth

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 81.

Chassis
Complete Kits
Part Number Applications
FEK-1000 67-69 Camaro, Firebird
FEK-1001 68-70 Chevelle, Malibu, Monte Carlo, El Camino, Cutlass, 442
FEK-1002 66-69 Charger
FEK-1003 71-72 Chevelle, Malibu, Monte Carlo, El Camino, Cutlass, 442
FEK-1004 70-72 Charger; 70-74 Challenger

FEK-1000 FEK-1001

FEK-1002

FEK-1003 FEK-1004

82. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

 Chassis
Steering Kits
Part Number Applications
FEK-6870A 68-70 Chevelle, Malibu, Monte Carlo, El Camino, Cutlass, 442
Kit Includes Center Link, Tie Rod Ends, Sleeves and Idler Arm
FEK-7172A 71-72 Chevelle, Malibu, Monte Carlo, El Camino, Cutlass, 442
Kit Includes Center Link, Tie Rod Ends, Sleeves and Idler Arm
FEK-6874X 68-69 Camaro, Firebird; 68-74 Chevy II, Nova
Kit Includes Tie Rod Ends, Sleeves and Idler Arm
FEK-7888G 78-88 Century, Regal, Chevelle, Malibu, Cutlass, Bonneville, Grand Prix
Kit Includes Center Link, Tie Rod Ends, Sleeves and Idler Arm
FEK-7382PU 73-82 C10/C15 Pickup and Suburban
Kit Includes Tie Rod Ends, Sleeves and Idler Arm
FEK-6769M 67-69 Mustang w/Power Steering (Exc. Boss 302, Boss 429)
Kit Includes Tie Rod Ends, Sleeves and Idler Arm
FEK-6769M-1 67-69 Mustang w/Manual Steering (Exc. Boss 302, Boss 429)
Kit Includes Tie Rod Ends, Sleeves and Idler Arm
FEK-6970M 69 Mustang Boss 302, Boss 429 w/Power Steering; 70 All w/Power Steering
Kit Includes Tie Rod Ends, Sleeves and Idler Arm
FEK-6970M-1 69 Mustang Boss 302, Boss 429 w/Manual Steering; 70 All w/Manual Steering
Kit Includes Tie Rod Ends, Sleeves and Idler Arm

Part Number Suffixes: A = GM “A” Body, G = GM “G” Body, M = Ford Mustang, PU = GM Pickups
X = GM “X” Body

Visit us at www.elginind.com facebook.com/elginindustries @elginindustries 83.

Chassis
Bushing Kits
Part Number Applications
FEK-6872A-1 68-72 Chevelle, Malibu, Monte Carlo, El Camino, Cutlass, 442
Kit Includes Upper and Lower (Oval) Control Arm Bushings, Sway Bar Bushings and Links
FEK-6872A-2 68-72 Chevelle, Malibu, Monte Carlo, El Camino, Cutlass, 442
Kit Includes Upper and Lower (Round) Control Arm Bushings, Sway Bar Bushings and Links
FEK-6769F 67-69 Camaro, Firebird
Kit Includes Upper and Lower Control Arm Bushings, Sway Bar Bushings and Links
FEK-6869X 68-69 Chevy II, Nova
Kit Includes Upper and Lower Control Arm Bushings, Sway Bar Bushings and Links
FEK-7074X 70-74 Chevy II, Nova
Kit Includes Upper and Lower Control Arm Bushings, Sway Bar Bushings and Links

Part Number Suffixes: A = GM “A” Body, F = GM “F” Body, X = GM “X” Body

84. Visit us at www.elginind.com facebook.com/elginindustries @elginindustries

WHERE WORLD-CLASS LIMITED LIFETIME WARRANTY

ELGININD.COM
ENGINES BEGIN. All engine and valve-train components are warranted to be free from defects in workmanship
and materials for as long as the purchaser owns the vehicle into which said merchandise is
installed. This limited warranty applies to the first retail purchaser only and exceeds normal
wear. The warranty is void if the product is not installed correctly or normal recommended
established precautions and installation procedures and testing are not followed.
Whether your goal is to win your class in drag racing or circle
track competition or simply command respect at regional and
Liability is limited to the repair or replacement of the defective part. The manufacturer retains
national car shows, the path to building a world-class engine
sole discretion in determining defective merchandise and assumes no responsibility for
begins with choosing the right parts from the right manufacturer.
diagnosis, removal, and/or installation labor, inconvenience or any other damages or expenses.
Premier engine builders and performance enthusiasts worldwide Except to the extent applicable state law expressly mandates to the contrary, there are no
master this journey with one of the industry’s most respected other warranties of merchantability, fitness for a particular purpose or use, and all other
and enduring brands — Elgin PRO-STOCK® high-performance
obligations or liabilities whether for consequential or other damages (including damages to

PERFORMANCE PARTS
components from USA-based manufacturer Elgin Industries.
related parts) arising out of the items’ sale, use, or operation. Neither the vendor of the item,
From complete power-adding valvetrain packages to our its agent or sales representative or any other person is authorized to waive or alter any form or
impressive lineup of race-winning parts for GM LS Series condition of this warranty.
engines, Elgin PRO-STOCK offers a proven path to
unforgettable performance. To request repair or replacement of a defective item, please return merchandise in its original
carton to the selling dealer. A copy of the dealer’s invoice must accompany the defective item.
BORN AT THE BRICKYARD.
Elgin’s racing heritage dates back to the early years of the
Indianapolis 500 when the iconic Elgin Piston Pin Special —
driven by the likes of Frank Brisko, Duke Nalon and Emil Andres —
IMPORTANT! PLEASE READ
wowed thousands of spectators at the legendary Brickyard. Elgin The use of O.E.M. part numbers or other terminology is solely for the purpose of assisting
technologies were also on display in an array of early stock car in selecting the correct replacement part. In compiling this catalog, reliable sources of
and road racing events, including the grueling Carerra Panamerica information have been used; however, we cannot assume responsibility for errors. Listing of
races of the early 1950s. parts in this catalog does not guarantee their availability, as items are added and subtracted
Fast forward to today: We can help you attack any performance according to market needs and demands. There is no intent to represent any parts herein as
challenge with precision-engineered, USA-quality components being that of the original equipment manufacturer.
crafted from only the finest materials. These include:
There is absolutely no warranty on any parts used in racing applications. There is no warranty
• Camshafts • Top end kits on products that have been physically altered, improperly installed or maintained, used in
improper applications, abused or not used in conjunction with the proper parts.
• Lifters • Oil pumps
• Pushrods • Head bolts Please note: Elgin Industries is not responsible for camshaft compatibility with computer-
controlled engines.
• Rocker arms, studs & kits • Expansion plug kits
• Valves, springs, inserts, • Harmonic balancers
retainers, locks & kits & bolt kits EMISSIONS WARNING! PLEASE NOTE
• Valve guides & seals • Flexplates/flywheels Local, state and federal law prohibit the removal or modification of any type of factory-
& bolts installed emission device or system, or the use of any parts that could increase emissions in
• BLACK ICE™ super-cryo’d
engine parts • Chassis parts vehicles designed for use on public streets or highways. In some states the sale or installation
on emission controlled vehicles of any devise which alters or modifies the original design or
• Timing sets
performance of such vehicle’s emission system is prohibited. Many of the parts listed in this
catalog are intended for use on vehicles competing in competitive events or on other types of
vehicles, which are exempt from the applicable emission control laws. Elgin recommends that
the applicable emission control laws be reviewed prior to installation of any non-standard part.

1-800-323-6764
sales@elginind.com | www.elginind.com
1-800-323-6764 EPS
sales@elginind.com | www.elginind.com © 2022 Elgin Industries, Inc. All rights reserved. No part of this publication covered by the copyrights hereon may be reproduced or
copied in any form or by any means whatsoever without the expressed prior written permission of Elgin® Industries, Inc.
22
 W W W.ELGININD.COM
Catalog No. EPS-22
Supersedes Catalog No. EPS-18

PERFORMANCE
PARTS
PERFORMANCE PARTS

PERFORMANCE PARTS
WORLD HEADQUARTERS ELGIN WORLD TRADE
1100 Jansen Farm Drive An Elgin Industries Company
Elgin, IL 60123 1100 Jansen Farm Drive
Call Toll-Free: 1-800-323-6764 Elgin, IL 60123
1-847-742-1720 1-847-742-1720
1-847-742-2220 Fax 1-847-742-2225 Fax
sales@elginind.com worldtrade@elginind.com

facebook.com/elginindustries
Social icon

Rounded square
Only use blue and/or white.

@elginindustries
For more details check out our
Brand Guidelines.

CATALOG NO. EPS-22

www.elginind.com
EPS
22