Republic of the Philippines

PANGASINAN STATE UNIVERSITY

Lingayen,Campus
COLLEGE OF TECHNOLOGY
Second Semester,S.Y.2021-2022

Construction of Home Made Drill Stand as an

Improvised Drill Press Machine

Capuz, Jazgem
Cruz, Jeedee M.
Etchepari, Lengene
Garacho, Harryson
Orfinada, Mark
(Researchers)

Engr. Jeff Pereyras

(Research Instructor)
INTRODUCTION
When using a power tool to a. Objective is to
complete work, a drill press stand for a create a hole in
hand drill was helpful since it allows you different way by
to work faster and more efficiently. It creating homemade
was easier to concentrate on your task drill press stand
when you are not always holding the
hand drill machine in your hand
because it was kept stable, secure, and REVIEW RELATED LITERATURE
at a comfortable working height. It
makes it easier to complete a variety of
A drill press, also known as a drilling
jobs, such as drilling with your hand drill
machine, is a tool used to create holes
at an angle or perpendicularly.
in hard materials. The workpiece is
The drill press stand gives you a
typically fastened in a vise lying on a
solid and secure base from which to
table, with the drill held in a spinning
carry out drilling operations with a hand
spindle and fed into it.
drill machine more precisely. Although
there are many different types of drill The drill may be gripped in a chuck with
press stands on the market, we chose to three jaws that move radially in unison,
build our own. This stand is made of or it may have a tapered shank that fits
steel and is very simple to construct. into a tapered hole in the spindle. Means
are always provided for varying the
To drill holes into or through
spindle speed and on some machines
metal, wood, or other materials, a drilling
for automatically feeding the drill into the
machine, also known as a drill press,
workpiece.
was used. There are benefits to using a
stationary drill press as opposed to a Drill presses for occasional use in
handheld drill. Harder and denser general-purpose machine shops usually
materials can be cut since applying the have only one spindle. For drilling
drill to the workpiece requires less effort. several holes successively or
simultaneously in a workpiece,
machines with multiple spindles are
OBJECTIVES OF THE STUDY available. When large quantities of
identical mechanical components are
a. It’s purpose that required, special purpose drilling
we make a drill stand to machines, with spindles arranged in a
save money and variety of positions relative to the
wasted time going to a workpiece, can be constructed.
shop
b. To find out if it Although drill presses are used mainly
effective to make a for drilling holes, they can also be used
homemade drill press for enlarging holes with a boring tool or
stand using eclectic drill finishing holes with a reamer. With the
serves as the machine. aid of a special tapping attachment and
a tap, they can produce threads in a
hole. See also boring machine.

Related Topics:

Much larger augers are used to bore Figure 1: Materials and Tools
holes in soil for the emplacement of
fence posts, telephone poles, and the To ensure accuracy, the materials were
like. measured, cut, and pocket holes were
drilled. Shown in Figure 2, 3 and 4
RELATED TOPICS
A drill stand is a stabilization device
designed to hold an electric rotary
device in position. Drills are loaded into
stands and locked into the desired
position for use. Dril stand are stationary
tools . Some stand on the floor while
others sit on the workbench with a
sturdy and adjustable platform to hold.
This hand Drill Stand is ideal for holding Figure 2: Measuring and cutting the
your drill steady during use and allows materials
for much more accurate drilling than
hand-held operation.The vise is durable
and lightweight, and it is a very portable
tool.
This hand drill stand, perfect for shop or
home use.It has a solid column bar and
sturdy base with slots for fitting a
machine vice, exercises stable during
use.
MATERIALS AND METHODS Figure 3: Cutting the edges

The drill press stand was

constructed by the researchers using
components from a junkyard. Cutting
discs, angel bars, rectangle bars,
springs, steel square bars, steel pipes,
screw thread, bolts, and nuts were all
utilized by the researchers. Figures 1
also depict the tools that were utilized.
 First, the students prepared two steel
square bar, they measured and labelled
it. Then, they cut the labelled parts
using the cutting disc. After that, they
make a u-shaped cut using an angle
bar in the side of steel square bar. They
make a hole for each sides of the steel
for screwing. Then, they screwed steel
in the both sides. They cleaned the
Figure 4: Grounding the edges edge of it using cutting disc. Then, they
materials used a metal, cube- a-like at the top for
covering, they measured and screwed
As soon as everything was it. Then, they make a hole at the center.
done, we constructed the
frame's two sides. We drill bolt Also, they make sure that the measured
holes into the top and attach the are right and parallel. Again, the
bottom while securing the students prepared another steel square
castors. Shown in Figure 5 bar for the grill stand, same measure,
same measurement and screwed at the
top of the covered. Then, they add a
steel pipe at the sides of the steel. After
that, they prepared again a steel square
bar and measured using the rectangular
bar and make a line on the center of it.
Then cut a cube-like on parts of the
steel the labelled. Then, cut they cut the
line using cutting disc.After that, they
put cover on the side of steel square
bar using a small cube-like steel. After,
they do the needed parts of Homemade
Figure 5: The drill press is now Mini Drill Stand. Set-up the parts and
securely fastened screwed it. Then, they tried it if all the
parts are all in good functions.

METHODOLOGY
The students wanted to make a
homemade Mini Drill Press Stand
Table. They evaluated and make
sample of it. They prepared all the
materials needed to performed the
activity.
PERSPECTIVE
TOP VIEW
BOTTOM VIEW
FRONT VIEW
REAR VIEW
LEFT VIEW
RIGHT VIEW
RESULTS AND DISCUSSION out that the Drill Press Stand was a
great equipment for high speed
This study was intended to
machining Hoperations. It utilized and
design and develop a Drill Press Stand
enhanced the level of productivity.
that has a capability of enhancing the
level of productivity. The researchers also discovered
some areas to be improved just like
After the interview we conducted
when you have to carry out work with
last 18th of June 2022 with the 4th Year
your power tool and it can help you do
Industrial Technology Major in
more and enhance the level of
Mechanical Technology students, we
productivity. This innovation might give
demonstrated its usage and went with a
the best experience in using Drill Press
consultation with the 17 Industrial
Stand while working in the machining
Technology Professors and experts from
industry.
the College of Technology at the
Pangasinan State University Lingayen Thus, the Drill Press Stand
Campus. showed durability and how powerful it
enhanced the level of productivity. The
Through a series of
users only used of steel to make this
demonstrations, the researchers tested
stand and it's very easy to make.
it to enhance the level of productivity.
Then, the researchers analyze all the RECOMMENDATION
gathered data. The results of our study
After the interview,
revealed that the Drill Press Stand was
demonstration, and consultation with the
a great equipment for machines
participants and experts, the
operations especially on high speed
researchers came up with the following
machining operations that produces
recommendation: the Drill Press Stand
intense amounts of vibrations. In
should provide a firm and stable
addition, it is also useful when you have
foundation for drilling operations more
to carry out work with your power tool
accurately by hand drill machine. There
and it can help you do more and
are many types of drill press stands
enhance the level of productivity. The
available in the market but we decided
Drill Press Stand was a successful
to make our own. We have used steel to
development and it worked out as the
make this stand and it's very easy to
researchers planned to.
make.
CONCLUSION
ACKNOWLEDGEMENT
The researchers analyzed all the
First and foremost, we would
interview responses of the research
want to express our gratitude to God,
participants including the successful
the Almighty, for providing us with the
demonstration of our developmental
security, courage, wisdom, and strength
study in the Industrial Technology
necessary to complete this
Professors and experts from the College
developmental research. We would like
of Technology. The researchers found
to use this chance to thank everyone
who participates in our study and to House Improvements. (2017, May 21)
express our honest and committed How To Use A Drill Press
efforts. The researchers want to express https://www.youtube.com/watch?
their sincere gratitude to Engr. Our v=Q2gv59aeMAQ
research professor Jeff Pereyras
Institution of Economic Technology.
deserves a lot of credit for his
(2017, March 23) Drill Press (Upright
knowledge and experience, which
Drilling Machine)
enabled us to overcome the challenges
we encountered. https://www.aps.anl.gov/files/APS-
Uploads/Safety-and-Training/Safety/
For additional support, direction,
Reference-Material/APS_Drill_Press.pdf
and advice, we are grateful to Professor
Ramel Deogracias, an industrial
technology professor at the Pangasinan
The Cuban Redneck DIY Channel.
State University Lingayen Campus, and
(2020, November 14) Drill Press Stand |
his ideas..
Homemade DIY Stand for Benchtop
Also, we would want to convey Drill-Press
our appreciation and respect to the https://www.youtube.com/watch?
university officials who permitted us to v=lzfX8NG1-KM
utilize their facilities. It gave us and
loaned us the tools and equipment that
helped us finish and implement this Tikkanen, A. (2008, November 6) drill
investigation. press
https://www.britannica.com/technology/
We express our profound
broaching-machine
gratitude, particularly to our friends who
constantly encouraging us to carry out
this research.
Duncan, M. (1996, November 22)
And finally, thanks to Section F, DRILLING MACHINES
the entire 4th year Bachelor of Industrial
http://uhv.cheme.cmu.edu/procedures/
Technology class, for their participation
machining/ch4.pdf
and time during our research. We
sincerely appreciate all of you.
REFERENCES

Dwevide, K. (2021, March 03) Parts of

Drilling Machine and Their
Functions,Types,Operation

https://www.mechical.com/2021/03/
parts-of-drilling-machine-and-their-
functions.html