Scribd
Upload
83 views1 page

SN63 PB37

Sn63/Pb37 solder alloy is a low-drossing, high-purity solder that melts at 183°C. It is available in bars, wire, and paste and is compatible with various electronic fluxes. The proprietary Electropure process reduces oxides and impurities to improve wetting and flow while reducing bridging during soldering. The alloy has a 7-year shelf life when stored at room temperature.

Uploaded by

Pablo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
83 views1 page

SN63 PB37

Sn63/Pb37 solder alloy is a low-drossing, high-purity solder that melts at 183°C. It is available in bars, wire, and paste and is compatible with various electronic fluxes. The proprietary Electropure process reduces oxides and impurities to improve wetting and flow while reducing bridging during soldering. The alloy has a 7-year shelf life when stored at room temperature.

Uploaded by

Pablo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SN63/PB37 SOLDER ALLOY

FEATURES
Liquidus 183°C (361°F)
High Purity
Low Dross
Complies with IPC J-STD-006 – Current Rev

DESCRIPTION
Sn63/Pb37 ElectropureTM is alloyed in a proprietary method
resulting in a low drossing, high wetting solder. The Electropure
process reduces suspended oxides in the solder, thus reducing
drossing, improving flow, and reducing bridging during soldering. HANDLING & STORAGE
Applications include wave and selective soldering and plating Parameter Time Temperature
where Sn63/Pb37 Electropure is primarily used as a coating for Shelf Life 7 years Room Temperature
corrosion protection, and as a base for soldering. Solid wire and bar solder products have a shelf life of 7 years
under proper storage conditions. For other product categories,
AVAILABILITY refer to those product specific TDS's. Consult the SDS for
Sn63/Pb37 Electropure is available in 1.1 kg (2.5 lb) bars, 3 kg specific handling procedures.
AIM Safety Bar and Solid Wire. Sn63/Pb37 Electropure is also
available in AIM flux cored wire solder and solder paste. FLUX COMPATIBILITY
Sn63/Pb37 Electropure bar solder is compatible with all
TYPICAL ALLOY COMPOSITION RMA, no clean and water soluble electronic grade fluxes.
Typical Alloy Composition
Sn: 63.0 Pb: 37.0 CLEANING
Refer to data sheets provided by the flux manufacturer.
TYPICAL MELTING TEMPERATURE
Melting Temperature SAFETY
Use with adequate ventilation and proper personal protective
183°C (361°F) Eutectic
equipment. Refer to the accompanying Safety Data Sheet for
any specific emergency information. Do not dispose of any
hazardous materials in non-approved containers.

Document Rev # NF5


Page 1 of 1

You might also like