OS 6.
2 Release Notes
System requirements (as of July 2020)
Hardware dependencies:
• CPU minimum 2GHz recommended
• RAM >= 2 GB
• Free hard disk storage > 15 GB, standard file system NTFS
• The software uses standard windows installation paths
Supported (diagnostic-)hardware:
• Getac S410 / Getac S410 Performance
• Panasonic CF-54
• VAS 6150C, VAS 6150D, VAS 6150E
• VAS 6160B, VAS 6160C, VAS 6160E
Service
• VAS 5054*, VAS 5054A*, VAS 5055*, VAS 6154* or VAS 6154A*
(*Please note the restrictions on following page.)
Software dependencies:
• Windows 7 or Windows 10
• Installed libraries (DLL) for Microsoft Visual Studio 2010:
vcredist_x86.exe (included in Windows 7)
• Installed Visual C++ Redistributable x86 for Microsoft Visual Studio 2010:
vcredist_x86.exe (included in Windows 7)
• Internet Explorer 11.0
• Adobe Acrobat Reader Version 11 or Adobe Acrobat Reader DC
• Font „Arial Unicode MS Regular“
Restrictions (as of July 2020)
Usage of vehicle communication interfaces VAS 6154 and VAS 6154A
Both interface types can be used under Windows 7 and Windows 10.
USB connectivity is recommended.
Usage of vehicle communication interfaces VAS 5054, VAS 5054A, and VAS 5055
These interface types can be used under Windows 7.
Please note that Windows 7 support ended on December 31st, 2019.
Service
Implemented user requirements in version 6
In this section, the implemented user requirements of version 6
are listed with their respective CCB-DS ID and original requirement title.
ODIS Service version 6.0.0:
CCB_DS_1609 The VWMCD Uninstaller must always be named the same and may occur only once.
CCB_DS_2114 Adaptation of the ODIS installation directories to the Microsoft guidelines prescribed by the
Volkswagen Group.
CCB_DS_2115 The pop-up when calling up diagnostic objects, which was only called up to the test plan by
means of sporadic error memory entries, must be adapted to the text and offer decision options
that influence the status of the test plan and diagnostic protocol.
CCB_DS_2176 With Crafter (LT3) translated texts from the external status list (XML RefTab for Crafter) should be
displayed. (ALM Defect 19356).
CCB_DS_2177 ODIS Service must support the identity provider "Group Retail Portal" so that the services
connected there can be used.
CCB_DS_2195 ODIS has to implement a pop-up for deactivating the diagnostic filter for KWP control units.
CCB_DS_2199 All texts within the applications and in the accompanying documents of the ODIS application
must comply with ANSI Z535.6.
CCB_DS_2214 ODIS service must be able to handle the SAE codes supplied by the Crafter / LT3 controllers.
CCB_DS_2215 The disclaimer in ODIS Service should be extended by the warning and information texts.
CCB_DS_2218 In the GFS-Light operating mode, ODIS Service must also be able to process traversing tests when
Service
simulating diagnosis.
CCB_DS_2227 ODIS Service must be able to authenticate itself to the DiagEntryCollector (DEC) cloud service so
that the quick diagnosis entry (CCB_DS_2113) and other remote diagnosis functionalities work.
CCB_DS_2272 During the ODIS installation, the folder selection (installation folder) should be omitted.
CCB_DS_2283 When diagnosing MEB vehicles, it must be ensured that the workshop mode is activated via the
service portlet before starting the diagnosis.
CCB_DS_2294 ODIS Service must support longer order numbers.
CCB_DS_2317 The ODIS products must be able to fully display foreign language content on Windows 10
computers.
CCB_DS_2336 ODIS-E must comply with the ISO standard for TCP / IP communication.
CCB_DS_2364 The brand coordinator must be able to optionally specify the standard communication path at the
vehicle project level.
ODIS Service Version 6.2.0:
CCB_DS_2472 To avoid ODIS updates on unsupported operating system versions (WIN7), an operating system
check must be implemented in the update process.
Defect resolution in version 6
In this section, the resolved defects of version 6
are listed with their respective Defect ID and original defect title.
ODIS Service version 6.0.0:
#16858 Update OS 2.2.4: VAS 6558-6558A ODIS is available twice in the programs and functions after
the update
#18402 OS 3.1.0 - 32.3.3 VCI 5054 Connection abort on Windows user change
#19891 AVL DiTest VAS6356 and VAS6558 are not uninstalled after OS 4.3.3 has been updated to OS
4.4.7
#20032 OS 5.0.3 transport mode not possible in Touareq MQB
#20195 Content is missing in HTML variants of the diagnostic protocol. All content is available in the XML
version
#20241 USA: GFS terminates with exception ODS5003E (query PR numbers)
#20265 OS 6.0: VAS6356 is not uninstalled
#20270 Missing objects when installing increments
#20273 OS 6.0: The log helper is not installed
#20275 OS 6.0: The ODIS service license cannot be changed using the Select Certificate
#20278 OS 6.0 Uninstall window shows wrong text
#20283 OS 6.0: Data update does not show versions of the data
#20300 OS 6.0 Update VW MCD not possible
Service
#20659 ODIS service: There were several error messages ODS4009E in the field
#20743 ODIS service: There is a spelling error in the German text after activating the Pro mode
#20747 ODIS S 5.1.3: Parallel flashing does not work
#20756 Double vehicle projects (data backup) after update VW Baseline version 2.39.0 in the folder
"MCD project"
#20761 ODIS-5064 -> Communication when debugging fails
#20781 The log helper 6.0.0 is not called in ODIS 6.0.0
#20807 Transfer of content from a GFS program to an additional document; Display in additional
document incorrect
#20832 ODIS Service: Dialog "Decision sporadic event memory entry" Label button must be removed
from the buttons
#20833 The explanation of the status of the tests in the ODIS service manual is incorrect and must be
corrected
#20835 OS 6.0 and Loghelper 6.0.0 do not send the feedback file to the LogHelper Cloud
#20845 ODIS Service 6.0.0: The texts on the buttons in the start mask have been cut off
#20847 ODIS Service 6.0.0: "VW_MCD_OS" will not be uninstalled
#20858 Basic setting "Exhaust gas recirculation test" can not be started. ECUKOM error message
CONDITIONS NOT CORRECT
#20862 OS 6.0.0: The text in ANSI boxes is displayed too small in ODIS Service
#20868 Duplicate entries of measurement technology in the system control after update to ODIS service
5.2.2
#20884 Offline SFD activation message window is missing
#20885 Offline SFD activation - remove meaningless characters
#20917 [ID3] OS / -No communication via DoiP on NEO_ID-3
#20936 [ID3] no VIN reading possible via DoIP
#20945 [OE-9] [ID3] no diagnosis entry via DoIP possible
Defect resolution in version 6
In this section, the resolved defects of version 6
are listed with their respective Defect ID and original defect title.
ODIS Service version 6.0.0:
#20948 When using the VAS6154A, the entry VI-SUFFIX in the VRTVPT seems to be ignored
#20955 ODIS Service 6.0.0: Directories in the ODIS installation folder are not deleted when the singles
setup is uninstalled
#20958 ODIS S 5.2.3: new CU_Variable behaves differently for 0001 and 0051
#20979 Display of pressure sensor VAS611013 limited to 50mbar
#21008 ODIS Service behaves differently when starting diagnostics with backend data
#21057 ODIS Service 6.0.0: Java update is not running
#21061 ODIS hangs in the start screen (error from market Norway)
#21064 ODIS Service 6.0.0: DSS Logon URL does not work
#21068 Implausible time units with ODIS Service 5.2.4
#21071 ODIS-Service 5.2.4: During the diagnosis, the connection to the VCI was lost and could not be
re-established
#21072 After an update (to ODIS 5.2.4) the diagnostic interface is no longer recognized via WLAN or
cable
#21081 OS 5.2.4: The VCI is lost between two diagnostic sessions
#21144 Time units too high in diagnostic protocol with ODIS Service 5.2.6
Service
#21154 & #21185 Incorrect IP version selection when starting diagnostics via DoIP on ID.3
#21174 ID.3: DoIP-Ack on a diagnostic request is missing
#21181 ID.3: Multilink does not work
#20824 Measurement package VAS6356_2019.3.7 cannot be uninstalled without errors
#21173 The DHCP server on the VCI takes too long to negotiate the IP addresses on first contact
ODIS Service version 6.0.1:
#21270 Notification of outdated software when the program starts
ODIS Service version 6.1.0:
#21228 & #21226 Adjustment of the timeout to the operating system standard when establishing a TCP connection
to correct VCI connection problems
#20236 Correction PDX-Builder: Error message when exporting runtime data via symbol
ODIS Service Version 6.2.0:
#21248 The automatic session cannot be created. Error ODS 4014E
#21276 Global configuration on network share with absolute path not possible
Supported vehicles with version 6
Approved AUDI vehicles
• All AUDI vehicles are supported.
Approved Volkswagen vehicles
• All Volkswagen vehicles are supported.
Approved Volkswagen Nutzfahrzeuge vehicles
• All Volkswagen Nutzfahrzeuge vehicles are supported.
Approved Seat vehicles
• All Seat vehicles are supported.
Approved Skoda vehicles
• All Skoda vehicles are supported.
Approved Bentley vehicles
• All Bentley vehicles are supported.
Approved Lamborghini vehicles
• The following Lamborghini vehicles are supported:
Gallardo from MY09-MY14 (only immobilizer and radio PIN code), Aventador, Huracán, and Urus.
Approved Bugatti vehicles
• Bugatti Veyron and Bugatti Chiron are supported.
Approved MAN vehicles
• MAN-TGE is supported.
