Scribd
Upload
835 views1 page

J722T Etc

The document provides information about a Mitsubishi J722T dual coil ignition module for engine management systems from HALTECH. It lists the pin connections for the module, including pins for coil negative connections, trigger inputs, tacho, ground and power. It also provides ignition setup information specifying falling edge output, constant charge output type and a charge time of approximately 4.0 milliseconds.

Uploaded by

Jesus Ramos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
835 views1 page

J722T Etc

The document provides information about a Mitsubishi J722T dual coil ignition module for engine management systems from HALTECH. It lists the pin connections for the module, including pins for coil negative connections, trigger inputs, tacho, ground and power. It also provides ignition setup information specifying falling edge output, constant charge output type and a charge time of approximately 4.0 milliseconds.

Uploaded by

Jesus Ramos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

HALTECH

TM
MITSUBISHI J722T DUAL COIL
IGNTION MODULE
ENGINE MANAGEMENT SYSTEMS

www.datasheet4u.com

MODULE PLUG

OC2 GND VB OC1


IB2 TACHO IB1

PIN FUNCTION CONNECTIONS


OC2 COIL NEGATIVE2 CONNECT TO COIL NEGATIVE 2ND COIL
IB2 TRIGGER INPUT 2 CONNECT TO HALTECH “DIG.OUT1”
GND GROUND CONNECT TO CHASSIS
TACHO TACHO CONNECT TO TACHO
VB SWITCHED +12V SUPPLY CONNECT TO SWITCHED +12V
IB1 TRIGGER INPUT 1 CONNECT TO HALTECH “IGN.OUT”
OC1 COIL NEGATIVE1 CONNECT TO COIL NEGATIVE 1ST COIL

IGNITION SETUP INFORMATION


OUTPUT EDGE: FALLING
OUTPUT TYPE: CONSTANT CHARGE
CHARGE TIME: APPROX 4.0ms

You might also like