SMS Commands L i s t
Instruction
Item Description Example
SMS format for setting Reply
ID,123456,1234567890 Tracker ID
2 ID Set Device ID ID,password,id number Set device id OK!
must not over 15 digits
Admin,123456,1,13421342519
index=1~3 for Max 3 authorized
Admin,password,index,authorized Admin phone number
3 Admin Set authorized number number. when ,authorized phone
phone number setting ok!
number = d,mean delet this
authorized number.
Timezone,123456,8.0 GMT No
4 Timezone Set GMT time zone number. TimeZone,password,GMT No. Timezone setting ok!
can be add +/- sign
Set time interval for continuous interval,123456,30,30
5 Interval Interval,password,m,n Upload interval setting ok!
tracking m,n:0~4294967295 seconds
Monitor,123456,13421342519
Tracker will call 13421342519
Set telephone number for Monitor phone number
6 Monitor Monitor,password,cell phone after receive this SMS. And the
wiretapping setting ok!
call will be accept when
13421342519 call it later.
Set speed limit for over speed Overspeed alarm setting
7 Speed Speed,password,n Speed,123456,90 n:0~200 Km/h
alarm ok!
GEO,123456,5000
Out geofence alarm
8 GEO Set Out of GEO alarm param GEO,password,radius
setting ok! Note, radius is in meter,disable it by
GEO,123456,0
9 Password Change password Password,old password,new password Password setting ok! Password,123456,888888
APN,123456,cmnet If no APN
name and password
required, just insert APN only;
10 APN Set APN Info APN,password,apn,user,password APN setting ok! APN defaulted as ‘CMNET’;
APN+APN name + password not
over
32+32+32 characters
name and password
required, just insert APN only;
10 APN Set APN Info APN,password,apn,user,password APN setting ok! APN defaulted as ‘CMNET’;
APN+APN name + password not
over
IP,123456,120.24.83.93,8011
32+32+32 characters or
11 IP Set IP and Port of the server IP,password,ip number,port IP and port setting ok! IP,123456,www.xytracking.net,80
11
GPRS,123456,1 Note: 0 disable,1
12 GPRS Enable GPRS connect GPRS,password,n gprs enable/disable ok!
enable
some setting will return,i.e:
13 Param Checking the Setting Param,password SN/IP/APN/SOS Param,123456
Number/Time zone
Some Status will be
list,i.e:Ver/Vbat/GSM
14 Status checking the device status Status,password Status,123456
Signal/GPRS link/GPS
signal
15 Restore Restore Factory Setting Restore,password Reset factory ok! Restore,123456
Reset,123456 Just do shutdown, it
16 Reset Power Off the device Reset,password Reset ok!
will be reset if charger in connected.
17 Loc Get Loctaion info Loc,password Location info will be return Loc,123456
Get Loction info in google maps Location info will be return
18 URL Url,password Url,123456
link in google maps link
uploc2svr,123456 Note: you can
set specific time
19 uploc2svr Notice device to report to server uploc2svr,password uploc2svr later!
uploc2svr,123456,1130 means
report to server at 11:30
dyd,123456# Note：only cut off
20 dyd power/fuel cut off dyd,password# DYD=Success
when speed less than 10km/h
21 hfyd power/fuel resume hfyd,password# HFYD=Success! hfyd,123456#
relay,123456,1 cut off
Relay power/fuel cut off/resume relay,123456,0/1 relay,123456,0 resume
22 protocol change protocol protocol,password,protocol name Set Protocol OK!! protocol,123456,goomi
Protocol name ：
goomi/tianqin/hongyuan/bsj
AT+SMS=ip,123456,gps.xytrackin
g.net,8011# Note：Device will
TCP/IP socket , send smscommand directly： AT+SMS=cmd,password#
restart after 10s after received
sms command
NOTE: The default password is 123456, All these functions are default, of course, proper change can be done according to your requirements.
