Scribd
Upload
113 views1 page

Preventive Maintenance Plan

The document provides a preventive maintenance plan for two machines: a multimeter tester and a soldering iron. The plan lists maintenance tasks, descriptions, estimated times, tools needed, and notes on checking conditions and taking corrective actions. For the multimeter tester, tasks include checking the battery, calibrating the knobs, and testing continuity. For the soldering iron, tasks are to check the temperature, inspect the cord for openings, and ensure the tip is clean for proper grounding. The plan aims to keep the machines in good working order through regular maintenance.

Uploaded by

Steven Ray Labugen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
113 views1 page

Preventive Maintenance Plan

The document provides a preventive maintenance plan for two machines: a multimeter tester and a soldering iron. The plan lists maintenance tasks, descriptions, estimated times, tools needed, and notes on checking conditions and taking corrective actions. For the multimeter tester, tasks include checking the battery, calibrating the knobs, and testing continuity. For the soldering iron, tasks are to check the temperature, inspect the cord for openings, and ensure the tip is clean for proper grounding. The plan aims to keep the machines in good working order through regular maintenance.

Uploaded by

Steven Ray Labugen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Preventive Maintenance Plan

Machine/Device: Multimeter Tester


Task Description of Maintenance Task Estimated Time (Minutes) 10
minutes
Process Standard Specification Tools/Materials Note Condition/Corrective Action Complete
Check the Battery Remove the Battery 9V Battery Check if there is a battery leakage or if it
cover, and use a still has a charge. Replace the Battery if
screwdriver if necessary. necessary.
Calibrate the Multi Tester Twist the Knobs Circle Knob in Visual If it is hard to twist, twist it gently till it is
the middle normal.
Checking Continuity See if the multi-meter Testing prod Wire If it is not giving value or buzzing, try using
Tester is still good different materials or wires then test again.
if still not, the tester is already broken.

Machine/Device: Soldering Iron


Task Description of Maintenance Task Estimated Time (Minutes) 10
minutes
Process Standard Specification Tools/Materials Note Condition/Corrective Action Complete
Temperature Check Plug the Soldering Iron Soldering Tip Temperature Check if the soldering iron is still good for
the wait for it to be hot Scanner the job.
Check if there is an open wire Inspect the wire Wire/Chord Electrical Tape If there is an open wire, use electrical tape
in the cord to cover it.
Checking Ground Resistance See if the Tip is Clean Should be Clean Wet Sponge Clean the tip with a wet cloth. Do not use
to Soldering Tip sandpaper, it will damage the tip.

You might also like