MOBILAIR M 50
Portable Compressor
With the world-renowned SIGMA PROFILE
Flow rate 5.0 m³/min (180 cfm)
www.kaeser.com
MOBILAIR M 50
®
The perfect energy-saving combination: Kubota engine with a KAESER rotary screw airend
The cornerstone of the M 50’s exceptional performance is a low-speed, energy-saving rotary screw airend from KAESER
featuring SIGMA PROFILE rotors, which is connected to a water-cooled, 4-cylinder Kubota diesel engine via 1:1 direct drive
– reliably eliminating the transmission losses associated with other types of drive system.
Maximum versatility Lightweight
The MOBILAIR M 50 is the ideal choice for powering Powerful does not automatically mean heavy; with a low
equipment such as air hammers and impact moles. Dura- operating weight of under 750 kg, the M 50 sets new
ble construction and premium-quality components ensure standards in terms of its power-to-weight ratio, making
trouble-free operation in ambient temperatures ranging it incredibly simple to manoeuvre and transport. More-
from -10 °C to +50 °C. A low-temperature version is also over, its 80-litre fuel capacity ensures more than enough
available for use in colder conditions. Versatility is further diesel is available to last for an entire work shift, including
enhanced by the chassis, which can be equipped with or on versions equipped with the optional compressed air
without an overrun brake and is available with a fixed or aftercooler.
height-adjustable tow bar. All stationary versions feature
a metal enclosure and can be mounted either on skids or
machine feet. Separate air filters for engine and compressor
The air filters are specifically matched to suit the respec-
tive air demand, thereby ensuring dependable operation.
Anti-Frost Control as standard A further important design detail is the standard-equipped
When operating without the optional compressed air electric fuel pump, which allows simple and convenient
aftercooler, the Anti-Frost Control automatically adjusts op- bleeding of the diesel lines. Labour-intensive manual
erating temperature in relation to ambient. In combination pumping is therefore eliminated.
with the optional tool lubricator, this feature prevents air
tools from freezing up and therefore significantly extends
their service life.
User-friendly operation
Reliable, gentle starts are guaranteed, even in cold temper-
atures, thanks to manual changeover from unloaded start to
load operation and a starter switch equipped with a preheating
function. A pressure gauge and airend discharge temperature
display enable operating status to be viewed at a glance.
2
Lightweight – Quiet – Powerful
3
4
Wide range of variants available
PE enclosure Metal enclosure
Constructed from rotomoulded polyethylene, the double- The all-steel, soundproof enclosure ensures long-term
walled sound enclosure ensures long-term value retention corrosion protection and residual value retention thanks
and is both corrosion- and scratch-resistant. to high-quality zinc priming and tough powder coating.
Stationary versions are always equipped with a metal
enclosure.
Alternative colours Service-friendly
The following special colours for the PE enclosure are The wide-opening enclosure provides excellent access to
readily available: all components and therefore greatly simplifies servicing
and maintenance work.
Blue – Equivalent to RAL 5017
Red – Equivalent to RAL 3020
Orange – Equivalent to RAL 2009
Green – Equivalent to RAL 6024
White – Equivalent to RAL 9010
Further enclosure colours and custom paintwork for metal
components are available upon request. 5
Available equipment
Closed floor pan
The closed floor pan immediately catches any liquids, extend its availability and service life, whilst also protecting
thereby preventing ground contamination in environmen- it from damage (kinking, stretching, being run over) and
tally sensitive zones. All drainage openings are sealed soiling.
with screw plugs.
Suitable for use in refineries
Compressed air aftercooler The M 50 is available with a certified spark arrestor for
The compressed air aftercooler cools the compressed air refinery applications. The engine shut-off valve automati-
down to 7 °C above ambient. Because the aftercooler is cally shuts the machine down upon intake of combustible
installed at an angle, accumulating condensate is reliably gases.
drained away. This environmentally friendly design pre-
vents freezing in winter, since the hot exhaust gases from Tool lubricator
the engine serve to evaporate the condensate.
If required, the M 50 is also available with a tool lubricator
for compressed air tools.
Hose reel
The factory-installed hose reel holds 20 m of lightweight
hose, which does not require fully reeling out in order to
operate. Properly storing the hose in this manner serves to
Compressed air treatment variants
Anti-Frost
Control
Automatically adjusts
operating temperature in
Anti-Frost Control relation to ambient to prevent
air tools from freezing up
Compressed air Condensate
aftercooler separator
System A Cool, condensate-free compressed
air (100% saturated), for
air tools and temporary
- Cool replacement of stationary
- Condensate-free compressors
Compressed air aftercooler
6
Technical specifications
Model Compressor 4-cylinder diesel engine (water-cooled) Complete system
Flow rate Working pressure Make Model Rated Speed at full Fuel Operating Compressed
engine load tank weight1) air outlet
power capacity
m3/min cfm bar PSI kW rpm l kg
2 × G¾
M 50 5.0 180 7 100 Kubota V1505-T 32.5 3000 80 735
1 × G1
1)
Weight specifications apply to standard unit including chassis with height-adjustable tow bar
2)
Guaranteed sound power level as per 2000/14/EC
3)
Measuring surface sound pressure level as per ISO 3744 (r= 10m)
Dimensions
Version:
Height-adjustable tow 1280 – 1370
bar
3035 – 3475 1410 – 1440
Version: 1280 – 1370
Fixed tow bar
3090 – 3215 1410 – 1440
Version: 1065
Skid-mounted
2190 1160
Version: 1065 – 1085
Stationary
2165 1130
7
The world is our home
As one of the world’s largest manufacturers of
compressors, blowers and compressed air systems,
KAESER KOMPRESSOREN is represented throughout
the world by a comprehensive network of wholly owned
subsidiaries and authorised distribution partners in over
140 countries.
By offering innovative, efficient and reliable products and
services, KAESER KOMPRESSOREN’s experienced
consultants and engineers work in close partnership
with customers to enhance their competitive edge
and to develop progressive system concepts that
continuously push the boundaries of performance and
technology. Moreover, decades of knowledge and expertise
from this industry-leading systems provider are made
available to each and every customer via the KAESER
group’s advanced global IT network.
These advantages, coupled with KAESER’s worldwide
service organisation, ensure that every product operates at
the peak of its performance at all times, providing optimal
efficiency and maximum availability.
P-550ED Specifications subject to change without notice. . 13/22
KAESER KOMPRESSOREN SE
P.O. Box 2143 – 96410 Coburg – GERMANY – Tel +49 9561 640-0 – Fax +49 9561 640-130
E-mail: productinfo@kaeser.com – www.kaeser.com
