Scribd
Upload
87 views2 pages

Trilen 9500G40

The document provides technical data and processing guidelines for TRILEN 9500G40 PP. It includes typical physical, mechanical, and thermal properties as well as general processing conditions such as drying, melt, and mold temperatures and screw speed.

Uploaded by

AthonioMourinho
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
87 views2 pages

Trilen 9500G40

The document provides technical data and processing guidelines for TRILEN 9500G40 PP. It includes typical physical, mechanical, and thermal properties as well as general processing conditions such as drying, melt, and mold temperatures and screw speed.

Uploaded by

AthonioMourinho
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TECHNICAL DATASHEET

TRILEN® 9500G40
PP

PROPERTY UNIT ASTM METHOD TYPICAL DATA

PHYSICAL

Specific Gravity - D792 1.22

Melt Flow Rate (230℃, 2.16kg) g/10min D1238 23

MECHANICAL

Tensile Strength at yield kgf/㎠ D638 850

Tensile Elongation at break % D638 3.5

Flexural Strength at yield kgf/㎠ D790 1,300

Flexural Modulus kgf/㎠ D790 70,000

Izod Impact Strength, notched, 23℃ (1/8”) kgf∙㎝/㎝ D256 10

THERMAL

HDT, 18.6 ㎏f/㎠ ℃ D648 153

ELECTRICAL

OTHERS

UL-94 Flammability - (UL 94) HB

※ The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for
products that are under different application condition.
PROCESSING GUIDE

TRILEN® 9500G40 GRADE


PP

General processing conditions for TRILEN9500G40 are shown below. Drying prior to processing is essential to
ensure desired appearance and property performance.

SPECIFICATION UNIT CONDITIONS

Drying Temperature ℃ 80~90

Drying Time hr 3~4

Moisture Content, Max % 0.02

Melt Temperature ℃ 220~240

Nozzle Temperature ℃ 215~235

Front Temperature ℃ 220~240

Middle Temperature ℃ 220~240

Rear Temperature ℃ 225~245

Mold Temperature ℃ 50~80

Back Pressure MPa <70

Screw Speed rpm <60

Injection Pressure MPa <70

Injection Speed % <50

Hold Pressure MPa <50

Injection Cushion mm 3~6

Global Network

HEAD OFFICE Chemical Research Center


Samyang Corporation 730, Daedeok-daero, Yuseong-gu, Daejeon, Korea
31, Jong-ro 33-gil, Jongno-gu, Seoul, Korea T. +82-42-865-8114
T. +82-2-740-7747

JEONJU ENGINEERING PLASTIC PLANT SAMYANG ENGINEERING PLASTICS (SHANGHAI) CO., LTD.
147, Palbok-ro, Deokjin-gu, Jeonju, Korea No.131, Shuangying Road, Qingpu Industrial Area,
T. +82-63-210-6664 Qingpu County, Shanghai, China
T. +86-21-6922-2270

SAMYANG ENGINEERING PLASTICS (HUNGARY) CO., LTD. SAMYANG ENGINEERING PLASTICS (VIETNAM) LLC
H5100, Jaszbereny, Necso, Telep 1, Hungary 1 Song Hanh Road, Nhon Trach 6 Industrial Zone, Long Tho
T. +36-21-311-1263 Commune, Nhon Trach District, Dong Nai Province, Vietnam
T. +84-0251-3686-707

You might also like