Comprehensive
NDT Solutions
www.arorandt.com
Distribution of NDT Solutions
In this vertical, we represent many reputed companies based in North America & Europe and look after the marketing &
distribution of their products in India. We also support our customers with effective after sales services, technique/product
related trainings and in application analysis.
We cater to a wide spectrum of industries ranging from manufacturing, heavy engineering, nuclear, aviation, research &
development, refineries, petrochemicals, power stations etc. The equipment’s we deal in are employed in quality control
assessments during production as well as in post-production stage, in-service inspection, and maintenance activities of
running plants, research, and related activities etc.
2
General purpose ultrasonic thickness gauge
Precision ultrasonic thickness gauges
Ultra-high precision thickness gauge
Single or dual element A-scan thickness
gauge.
The Multigauge 6500 Drone has been
specifically designed to offer a
complete drone thickness gauging
solution
3
We offer Battery-free, ultrasonic thickness sensors that are permanently installed to the surface of pipework or vessels. These specially designed
sensors are wirelessly powered-up by handheld data collection tool, and a thickness measurement is simultaneously collected. These
measurements can be uploaded to software for remote data management, allowing operators to effectively monitor internal corrosion & erosion.
Ÿ Battery-free - wirelessly activated
Ÿ Ultrathin: easily embeddable & lightweight
Ÿ RFID tagged
Ÿ ATEX/IECEx certified
WAND RDC (Remote Data Collector)
Battery-powered device designed to work
with WAND sensors. The WAND-RDC will take
thickness readings from WAND sensors on
demand, or automatically at predefined
intervals, and the data can then be
collected wirelessly via Bluetooth:
Extension coil for installing sensor under
Salient Features:
insulation
Ÿ Up to 200m wireless range
Ÿ 5-year(+) battery life
Ÿ Up to 8 WAND sensors can be connected
per RDC module, using reader pad wires
Ÿ Inbuilt temperature sensor
4
M2M Mantis is a robust and lightweight flaw detector offering UT, PAUT, TOFD, and TFM through the
streamlined user interface Capture. Available in 16:64 PR channel configuration & TFM imaging
upto 64 elements.
IP65
LYNCS is an advanced modular ultrasonic
inspection scanner that has been designed
to provide Phased Array (PAUT) corrosion
mapping and PAUT/TOFD weld integrity
assessment.
5
Caliper
Composite Solutions:
Bondascope Bondahub II
Ÿ C-scan Images Resonance, Pitch-Catch
and MIA mode
Ÿ Compatibility with Scanners and
Bondascope 3100, as well as Bond Testers
from other manufacturers
Ÿ Portable, battery operated system, large
sunreadable screen
6
Salient Features
Ÿ 1st Guided Wave (GW) instrument with full onboard data
analysis - No need for a secondary laptop
Ÿ Compatible with all other commercial piezo GW equipment
Ÿ Onboard pump and full diagnostics - Improved reliability and
data quality
Ÿ Large high-quality touchscreen
Ÿ Lightweight and compact
Magneto-Tool for 1" to 4" Pipes
Piezo-Tool for 6" to 72" Pipes
Salient Features
Ÿ Lightest and most flexible tool
Ÿ Quick and simple mounting for
most pipes
Ÿ Single connector with auto-tool
recognition
Ÿ Increased transducers around the
pipe
Ÿ Broadest frequency range with no
need to change spacing
7
JSR Ultrasonics offers a complete range of high frequency pulser/receivers.
The DPR300 is a Manual / Digital controlled ultrasonic pulser/receiver available in 35 MHz, 50 MHz, and 60 MHz options & adjustable 100 V to 900 V
pulser power supply.
The DPR500 DUAL Pulser/Receiver is the first dual channel, modular instrument consisting of two complete pulser/receivers integrated into one unit.
Available in 500 MHz, 300 MHz, and 50 MHz options.
The PRC50 is a versatile single-channel Pulser-Receiver on a half-length PCI card.The PRC50 is provided with a turnkey control software program for
Windows, and a SDK to create custom Windows applications.
Phased Array Probes
Immersion Probes High Frequency Probes
8
EMAT technology is an ultrasonic testing method that differs from the traditional piezoelectric transducers in the way the sound is generated. An
EMAT consists of a magnet & a coil of wire and relies on electromagnetic acoustic interaction for elastic wave generation. Using Lorentz forces &
magnetostriction, the EMAT & the metal test surface interact & generate an acoustic wave within the material. The material being inspected is its
own transducer, eliminating the need for liquid couplant.
EMAT Application
Ÿ 1 to 8 channels for normal beam EMAT applications
Ÿ Up to 1000Vpp per channel, 1 to 3 cycles and up to 3000 PRF for
scanning speeds greater than 1 m/s with 1mm resolution
Ÿ Self-contained IP54 industrial enclosure that can be located
anywhere near the point of inspection. NDT-Web user-interface
broadcast via wireless and/or Ethernet connection to any
external device -PC, Tablet- running any operating system
The temate TG-IS(B) is designed for detecting and measuring wall loss,
Hydrogen Corrosion Cracking (HCC), and caustic gauging in boiler tubes.
Salient Features
· Non-contact EMAT technique.
· Permits 100% inspection of boilers instead of spot checking at up to
15cm/s of scanning speed.
· Ultrasonic EMAT technique provides accurate thickness readings with
minimum surface preparation.
· Sensor with integrated encoder and light indicators for fast visual alert
to the operator.
· Exclusive boiler mapping software application permits easy
visualization of boiler walls with results of inspection for fast analysis and
interpretation.
· Proven technology with hundreds of boilers and thousands of
kilometres of inspected tube worldwide.
9
Reddy ECA
The most popular multi-technology test instrument on the market. It’s a portable electromagnetic
Available in three different array configurations: 64, 128, or 256 NDT system for rapid crack and
elements. corrosion assessment. Reddy is
available 32/64/128 ECA
Channels to drive ECA &
tangential ECA (TECA) Probes. All
models also comes with a MFL
option to drive PipeScan HD.
ECA & TECA Probes
Spyne is an adaptable surface I-Flex & T-Flex Probes are
Eddy Current Array (ECA) specifically designed to fit
screening tool. complex geometries.
The ECA DefHi can detect & The Sharck HR & Sharck Probes
size typical defects in any designed for the depth sizing
orientation. of surface-breaking linear
indications.
Eddyfi Magnifi is a constantly evolving, integrated ECA Gear Probes are ECA Padded Probes are
electromagnetic inspection data acquisition and analysis designed for varying tooth perfect for examining weld
software. It boasts an intuitive graphical user interface (GUI) profile shapes & sizes. beads, as well as transition &
suited to modern devices, powerful reporting function, and heat-affected zones.
data management, as well as simple inspection configuration.
Using Ectane 2 with Magnifi & TubePro makes your tubing data
acquisition, analysis, & reporting easy. The setup and tube list
wizard enable you to instantly build & acquire your tube bundle.
The assisted data analysis feature delivers high-quality reports
including all the 2D & 3D tube mapping and other information.
The probe pusher system is designed to enhance the operation of
tubing probes. Configure & control the Probot with Magnifi.
10
Alternating Current
Pulsed Eddy Current (PEC)
Field Measurement (ACFM)
TSC Amigo2's main focus is detecting & sizing surface-breaking
cracks in a variety of metal components through paint & coatings.
Ÿ Weld inspection: w/ standard probes & single-pass array probes
Ÿ One or two-person operation (e.g., confined spaces)
Ÿ High-temperature applications
Ÿ Inspection through thick coatings
Ÿ Thread inspection
Ÿ Splash zone inspection
PEC Probe for Galvanized
Steel Cladding
Applications
Ÿ Rope Access Inspections
Ÿ Painted & Coated Structures
Ÿ Cranes & Towers
Ÿ Refinery Piping & Vessels
Ÿ Mining Gear Teeth
Ÿ Topside Offshore/Onshore Structures
SurfacePro 3D is an advanced For the last 30 years, ACFM technology has been used globally as
visualization & reporting software the method of choice for the detection & sizing of subsea surface-
designed to automatically create breaking cracks. Recognized & approved by many certification
components & overlay stitched C- bodies, including DNV, ABS & Lloyds, the technique has been used
scan data. Easily import, export, successfully against traditional uncomputerized & more user
create & edit report templates. dependent methods, such as MPI.
11
Magnetic Flux Leakage (MFL)
Tank Floor Scanner- FloormapX Wire Rope Tester- Intros
INTROS enables simultaneously accurate measurement of loss of
metallic area (LMA) & detection of outer & inner localized flaws
(LF), such as broken wires, strands, pitting corrosion in wire ropes.
An intuitive software designed to increase workflow efficiency
and produce accurate & comprehensive tank inspection data.
INTROS AUTO designed for non-destructive inspection of steel wire
ropes with automatic data interpretation. Results of automatic
data interpretation display in “traffic light” mode. Green light
informs the operator the opportunity to continue rope operation;
yellow light warns against certain level of rope deterioration – both
LMA and LF & is adjustable; red light alerts that rope may no longer
be used.
The Pipescan HD is the highest resolution MFL scanner on the
market. With a high Probability of Detection. It is easily compatible
with Ectane 2 (ECA), Swift M & Reddy-32 M.
Ÿ Speed: Scanning, data analysis & reporting in one quick Steel-cord conveyor belt scanner INTROCON is designed for non-
workflow destructive inspection of steel cord during operation of the
Ÿ Highest resolution-easy to understand C-scan imaging conveyor belt. INTROCON comprises basic unit, scanner &
Ÿ High POD with defects down to 1 mm (0.04 in) identified Wintrocon software. The operation is based on eddy currrent
Ÿ No Couplant & minimal surface preparation required principle of non-destructive testing
Ÿ Flexible heads fit a full range of pipe and vessel sizes
12
LLX Series
The LLX series is an air cooled, high frequency constant potential generator. It is dedicated to high
precision applications like aerospace where specific requirements & speed of inspection are needed.
These units are CP type & are controlled by a DC1 or Hand-XD and can be used in combination with
digital detectors.
CERAM Series
The series is made of 3 different generators based on a ceramic insert with a 100% duty cycle. The
generators are specifically designed to be operated in difficult environments with a constant output.
All units have to be combined to one of the two available control units, CF2000 or Hand-X and are
equipped with very lightweight new generation of cables.
GF series
The GF series derivates from the Crawler technology and is providing a reliable & cost effective solution
for price sensitive markets. These units have to be combined to one of the two available type of control
units, CF2000 or Hand-X with very lightweight new generation of cables.
Crawler Series
The Baltospot for crawlers offers a complete assembly including the mechanical carrier, the well
known Balteau NDT X-ray generator, the chopper and a range of accessories in order to make the
most out of this equipment.
XLD Series
The XLD Series is a made of constant potential generator specially designed for real time applications &
offers an extremely high dose stability to produce quality images comparable to conventional X-ray
films. Equipped with the RC8 or XLP, it is very user friendly.
XSD Series
A full X-ray equipment is made up of a generator (XSD), a control unit (LS1), a tubehead (TSD or TSC)
and a cooling unit (WCU or OACU). Balteau XSD generators are 19’’ racks, built around a sealed, oil &
gas free, solid stage voltage multiplier. XSD are either monopolar or bipolar: generators are 100, 160,
225, 320, 420 and 450 kV. Powers available are 4 to 4.5 kW.
Mobile equipment
The XMD and XLMD are the mobile versions of the Baltograph range. A robust trolley has been specially
designed to bring the generators to the location of your inspections. Equipped with 2 wheels, the trolley
is taking all accessories including the 3 or 4 kW closed circuit water cooling unit.
VX Exchanger RT is a complete system designed for radiographic testing of the tube to
tube-sheet welded joints with only one-sided access from the tube-sheet side. 1500
joints per 8-hours shift (working in a 2-men team). Under 2 m controlled area. VX
Exchanger RT digital system powered by the Isee! Professional software fully replaces
the classic film-based method & can be used for metallic materials up to a tube
diameter of about 7 - 80 mm ID tubes. 0.1 mm defect sensitivity in steel. Immediate
analysis on screen. Digital reporting and archiving.
Ÿ High efficiency custom-made digital detector
Ÿ Pen anode metal-ceramic X-ray source & High-voltage generator
Ÿ Computer with (optional) high-quality evaluation monitor
Ÿ ISee! Professional software with add-ons for controlling the X-ray source & digital
detector, image processing & evaluation, report generation, & archiving (optional)
13
We offer low-cost push rod camera from Ritec, Germany. The Considered by many in the industry as the gold standard of
push rod cameras are available in three models. radiation-proof cameras, Diakont’s D40 offers the perfect mix of
high resolution, small size & high radiation tolerance required for
reliable, precision performance in an extreme environment.
Color Decoding System CDS-40 is a unique state-of-the-art system
specially designed to enable a possibility of transformation Black &
White video image from D40M tube TV Cameras into high-quality
Color image
The AGILIOS pan & tilt camera
system is developed with the
goal to perform “Inspections in
all situations“. The basis for this is
the ultra-light design of the coiler
with maximum stability for the
use on the construction site as
well as two battery packs which
allow 6 hours of inspection
without charging or power
supply.
ROVION pipeline inspection
system is scalable & all
components are fully
compatible among each other.
Inspections for pipe diameters
ranging from 100mm to 2000mm
can be performed.
The Quickview zoom inspection
camera system enables a quick
>
look into pipelines, manholes or Ÿ 45×10 5 Rads radiation tolerance
tanks. A zoom camera Ÿ Full color HD (1080p)
mounted to a carbon fiber Ÿ 10x optical zoom and 4x digital zoom with auto focus
telescope provides shadow- Ÿ Underwater laser size measurement
free illumination & sharp Ÿ Robust pan & tilt drives
pictures with its revolutionary Ÿ Rugged umbilical cal
Haloptic technology. Ÿ Portable controller configuration
Ÿ LAN streaming
14
The simulation software CIVA is an expertise platform dedicated to
non-destructive testing. It is composed of simulation, imaging &
Ÿ Have a tolerance of +/- 0.150” (4mm). analysis modules, which allow conceiving or optimizing inspection
Ÿ Includes all standard kit specimens and all UT & MT / PT practical techniques & predicting their performances in realistic NDT
exam specimens. configurations.
Ÿ Designed to enhance the training and development of new
and veteran NDT technicians.
Ÿ Basic Document Package with CAD drawings is included with
each kit or exam specimen.
A simplified version of CIVA is also available, called CIVA
Education. This version, very easy to use, has been adapted for
universities & training centres to help teaching & understanding
the physical phenomena involved in NDT. The simple, realistic &
interactive interface of CIVA education makes it easy to highlight
the main phenomena & understand typical NDT results in a visual
& comprehensive environment. It comprises of 3 Modules: UT
Module, ECT Module & RT Module.
Ÿ Have a tolerance of +/- 0.080” (2mm).
Ÿ Includes all advanced specimens, API-UT-1 kit & all ASME section
XI appendix VII specimen bank.
Ÿ Designed to enhance the training & qualification of level I, II, & III
personnel with regards to SNT-TC-1 A, EN473 & PCN.
Ÿ Document package with CAD drawings is included with each
kit or individual Advanced Specimen.
TraiNDE UT is a manual ultrasonic testing simulator that helps
trainers teach operators on ultrasonic testing. It reproduces real
inspection conditions for a number of applications. The dynamic
displays & probe handling mimic real inspection behaviours. The
operator handles a dummy probe on the digital mock-up.
TraiNDE RT is a virtual reality software associated with a database
of film results, which reproduces the inspection conditions for
Ÿ Have a tolerance of +/- 0.040” (1mm).
numerous applications (welded tubes and plates, cast specimens,
Ÿ Includes all ASME Section XI Appendix VIII specimens & most of
X-ray and Gamma tubes, several films…) taking into account the
the custom designed specimens.
IQI, lead letters, and X-ray flexible rulers.
Ÿ Designed to customer specifications for their training &
qualification of NDT personnel, equipment, and procedures.
Ÿ Detailed documentation is included with specimens
15
16
ATPL Brochure Comprehensive NDT Solutions 2021/12 Rev. 00
