ICOOL-III Air Cooler machine
User Manual
1
Content
Chapter 1 Machine Description
1.1 System composition
1.2 Accessories list
1.3 Installation
1.4 Specification
Chapter 2 System Description
2.1 Working Principle
2.2 Advantages
2.3 Interface Description
Chapter 3 Treatment
Chapter 4 Precautions of using
1
Chapter 1 Machine Description
1.1 System composition
Front view
Handle bracket
Start-Stop button
Temperature display screen
Wind speed and temperature control knob
Outlet pipe connection
2
Back view
Broker
Power cable connector
Water level window
Water outlet
3
1.2 Accessories list
Name Quantit Unit Name Quantity Unit
y
Pipe 1 piece Bracket 1 piece
Treatment head 3 piece Bracket hook 2 piece
Power cable 1 piece Drain tube &r 1 piece
ubber ring
Pipe
Bracket
Treatment head
Bracket hook
Power cable Drain tube & rubber ring
4
Instructions for use of rubber ring：Replace the rubber ring if
there is water leakage from the water outlet
Adapter Instruction
Name Image Function Description
Round Small range treatment, reduces
Adapter skin temperature, such as eye
brows, armpits, foreheads
Middle round Moderate range of treatment
Adapter to reduce skin temperature,
especially hair removal
treatment, such as arms,
armpits, legs
Large square Large-scale treatment reduces
Adapter skin temperature, especially
hair removal treatment, such
as thighs and abdomen
5
808 Adaptor With 808 diode laser hair
Head removal macine treatment
(Optional)
SHR Adaptor With IPL, SHR hair removal,
skin rejuvenation machine
Head treatment
(Optional)
1.3 Installation
Before opening the instrument, check that the installation environment
location. The system should be installed away from the hot air, and with other
objects have a certain distance.
Take out the machine parts and place them indoors for 2 hours to
perform the following operations.
Step 1: As shown in the figure, insert the bracket into the fixed point
and install the clip;
Step 2: Install the air outlet
6
Step 3: Fix the air outlet pipe and install the treatment head
Step 4: Install the power cord
7
1.4 Specification
Type ICOOL air cooling system
Cooling power 1500W
Temperature range -4℃~-30℃(adjustable)
Refrigerants R404A
Fan speed 1~8 level (adjustable)
Treatment Pipe 2.5m
Pipe weight 200g
Outlet adaptor size Φ6mm Φ10mm 10mm*1.5mm
LCD Screen 2.4 Inch
Storage platform size 450*280*20mm
Machine size 610*380*750mm 50KG
Package size 820-500-930mm 74KG
Power source AC/100-240 V, 50-60 Hz，10A
8
Chapter 2 System Description
2.1 Working Principle
Preoperative use, temporary anesthesia.
Strong refrigeration temperature -30℃.
The 1500W high-power compressor provided by Danfoss ensures
that the system can work continuously for a long time.The high-speed
fan makes the air emit a strong cooling effect,and the fan automatically
adjusts with the temperature setting.Self-defrosting is the best
performance ofrefrigeration performance. The self-draining system ensures
safe and clean use. The support rod device of the blowing pipe makes
the operation more comfortable.
2.2 Advantages
(1) HIGHLY Compressor Imported from Japan and DUPONT environmen
tally friendly refrigerant R134a;
(2) Ultra-low temperature refrigeration -30 degrees
(3) Applicable to foreign machines (same size as ZIMMER and foton)
(4) 2.5mm length and 200g weight of the air pipe are more flexible;
(5) 5.1L large capacity bellows, sustainable ultra-low temperature
treatment
(6) Dedicated bracket for easy operation with orientation
(7) 2.4-inch true color touch screen, visual human-machine interface
(8) 700L/min super strong wind speed, 8 gears adjustable, suitable for
various treatments
(9) The whole machine is equipped with silencer to reduce treatment
noise and make treatment more comfortable
(10) Super strong platform, placed with a variety of instruments for use.
2.3 Interface Description
(1) Wait for 3 minutes countdown when starting up-prevent
9
frequent starting of the compressor and stop working
(2) Compressor preheating work for 5 minutes, temperatur
e is
not adjustable
After 8 minutes, the machine can adjust the temperature
10
Chapter 3 Treatment
The equipment is suitable for photoelectric equipment such as
808 laser, IPL, 980 laser, CO2 laser, radio frequency, Pico
laser, etc. It can be used to cool the skin to avoid burns and
reduce pain.
1. Before treatment, air cooler can be used to blow the treatment area
for 2 minutes to cool the treatment area
2. For treatment with photoelectric equipment, the air outlet should be
aimed at the light emitting part
3. If there is no matching handle with the photoelectric device, when per
forming facial treatment, the air outlet needs to be inclined along the dir
ection of the patient's forehead to chin for treatment, so that the patient
is more comfortable.
Operation as shown
For example, hold the blower during operation, follow the operation
direaction of the treatment head, and blow cold air while doing.
If the operation uses the adapter head, the cold wind will blow out from
the treatment head.
11
Or you can use the bracket when you do treatment.
Chapter 4 Precautions of using
(1) The temperature setting can be adjusted 8 minutes after
starting;
(2) The interface only displays the set temperature, not the
actual temperature;
(3) The wind speed can be adjusted automatically according
to the temperature setting, the lower the temperature, the
higher the wind speed;
(4) Observe the water level before using the machine. If the
water tank is full, drain it in time;
(5) The instrument cannot be transported upside down, and it
must be left for two hours before it can be used.
12
