TP-583T |
HDMI | HDBaseT | 4K/60 UHD (4:4:4)
4K HDR HDMI Transmitter with RS−232 & IR
over Long−Reach HDBaseT
TP−583T is a high−performance, long−reach
HDBaseT transmitter for 4K HDR HDMI, RS−232 and
IR signals over twisted pair. TP−583T converts all
input signals into the transmitted HDBaseT signal. It
extends video signals to up to 70m (230ft) over
Kramer copper cables at up to 4K@60Hz (4:4:4) video
resolutions. It is compatible with standard
HDBaseT−compliant extenders at 4K@30Hz and HD
video resolutions
FEATURES
High Performance Standard Extender - Professional HDBaseT extender for providing long–reach
signals over twisted–pair copper infrastructures. It employs low–level video compression technology
that delivers visually lossless performance for 4K@60 (4:4:4) and HDR signals with near–zero
latency. This high−quality compressed signal is extended to almost double the extension reach of the
uncompressed signal
Future-proof, Standard Extender - TP–583T is a standard HDBaseT extender, backwards compatible
with other standard HDBT extenders. It extends either compressed or uncompressed HDBaseT
signal, by auto−adapting to the compression capabilities of its connected extender. This enables it to
be connected to any market–available HDBaseT–compliant extension product
Intelligent Compression Handling - Automatically detects a standard HDBaseT extender without
compression and disables the compression to extend the signal in compliance with the detected
extender
HDMI Signal Extension - HDR HDCP 2.2 compliant. Supports deep color, x.v.Color™, lip sync, HDMI
uncompressed audio channels, Dolby TrueHD, DTS–HD, 2K, 4K, and 3D as specified in HDMI 2.0.
EDID and CEC signals are passed through from the source to the display
I–EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID pass–through algorithm that
ensures Plug and Play operation for HDMI source and display systems
Multi–channel Audio Extension - Up to 32 channels of digital stereo uncompressed signals for
supporting studio–grade surround sound
Bidirectional RS–232 Extension - Serial interface data flows in both directions, allowing data
transmission and device control
Bidirectional Infrared Extension - IR interface data flows in both directions, allowing remote control of
peripheral devices located at either end of the extended line
Cost–Effective Maintenance - Status LED indicators for HDMI and HDBT ports facilitate easy local
maintenance and troubleshooting. Local firmware upgrade via RS–232 connection ensures lasting,
field–proven deployment
Easy Installation - Compact DigiTOOLS® fan–less enclosure for dropped–ceiling mounting, or
side–by–side mounting of 3 units in a 1U rack space with the recommended rack adapter
TECHNICAL SPECIFICATIONS
Inputs 1 HDMI: On a female HDMI connector
Outputs 1 HDBT: On an RJ–45 connector
Ports 1 RS-232: On a 3–pin terminal block connector for serial link extension
1 IR: On a 3.5mm mini jack connector
Extension Line Standard Compression Up to 40m (130ft) at 4K@60Hz (4:4:4) or 4K@60Hz (4:2:0)
Up to 70m (230ft) at 4K@30Hz (4:4:4) or full HD (1080p @60Hz 36bpp)
High Compression Up to 70m (230ft) at 4K@60Hz (4:4:4), 4K@60Hz (4:2:0), or full
HD (1080p @60Hz 36bpp)
No Compression Up to 40m (130ft) at 4K@60Hz (4:2:0)
Up to 70m (230ft) at full HD (1080p @60Hz 36bpp)
Standards Compliance HDBaseT 1.0
Note When using recommended Kramer cables
Video Max Data Rate: Up to 18Gbps (6Gbps per graphic channel)
Standard Compression Max Resolution: 4096x2160@60Hz (4:4:4) 24bpp
High Compression Max Resolution: 3840x2160@60Hz (4:4:4) 24bpp
No Compression Max Resolution 4096x2160@60Hz (4:2:0) 24bpp
Compliance: HDCP 2.2, HDR 10
HDMI Support Deep color, x.v.Color™, lip sync, HDMI uncompressed audio
channels, Dolby TrueHD, DTS–HD, 2K, 4K, and 3D as specified in HDMI 2.0
EXTENDED 300 to 115200 baud rate
BIDIRECTIONAL RS-
232:
EXTENDED 20kHz to 100kHz frequency
BIDIRECTIONAL IR:
User Interface Indicators: IN, OUT, LINK and ON LEDs
Controls: DIP–switches
Power Source: 12V DC, 2A
Consumption: 480mA
Environmental Operating Temperature: 0° to +40°C (32° to 104°F)
Conditions
Storage Temperature: –40° to +70°C (–40° to 158°F)
Humidity: 10% to 90%, RHL non–condensing
Regulatory Safety: CE, UL
Compliance
(Standards
Compliance)
Environmental: RoHs, WEEE
Enclosure
Size: DigiTOOLS®
Type: Aluminum
Cooling: Convection ventilation
Accessories Included: Power adapter, power cord, bracket set
Product Dimensions 12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H
Product Weight 0.3kg (0.6lbs) approx
Shipping Dimensions 49.00cm x 18.60cm x 58.80cm (19.29" x 7.32" x 23.15" ) W, D, H
Shipping Weight 0.7kg (1.4lbs) approx
