[Roland TruevisS VG-640 Supplemental Explanations Read This before Starting to Assemble the Product Thank you very much for purchasing the VG-640, There are a number of supplement instruction manuals included with TE TH e te” that need to be made to the Manual Aectedpage [Tle Pageln ts a Zinc ems 2 setup Guide New ation | Switching the nkTabe and Ainingatabel_[P2 f.18t020_—_| step Inkling Pa #.15%016 | Wain wena Br ps Out ork Warngs mn 95 Super Gearing rn eior | Clearing the Wipe Tay and Replacing the |p User's Manual ‘Tray Pads nse] Beteminng What opps Wen nk Fas | pisses | Pedr on Pepaing Move 0 RE [p P.196 Specifications P15 Roland DG Corporation R1-160216‘Thank you very much for purchasing this product. > To ensure correct and safe usage with a full understanding of this product’s performance, please be sure to read ‘through this manual completely and store it in a safe location, > Unauthorized copying or transferral, in whole or in part, of this manual is prohibited. > The contents of this manual and the specifications ofthis product are subject to change without notice. > This manual and the product have been prepared and tested as much as possible. If you find any misprints or errors, please inform Roland DG Corp. > Roland DG Corp. assumes no responsibility for any director indirect loss or damage that may occur through use of this product, regardless of any failure to perform on the part of this product. > Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage that may occur with respect to any article made using this product. Mans.io Company names and product names are trademarks or registered trademarks of their respective holders. Copyright ©2016 Roland DG Corporation http://www rolanddg.co.jp/Contents Contents... Additions and Changes to the Setup Guide Change: 2. Included Items (on page 4)... ‘Added Operation: Switching the Ink Tube and Affiing a Label Change: Step 7 : Ink Filing (on page 18 to 20) Changes to the User's Manual aT Change: Main Menu (on page 14 to 17) 7 Change: Out-of-ink Wamings (on page 67) 8 Change: Super Cleaning (on page 9510 97)...... 9 Change: Cleaning the Wiper Tray and Replacing the Tray Pads (on page 102 to 105) 9 Change: Determining What Happens When Ink Runs Out (on page 158) 10 Change: Procedure from Preparing to Move to Reinstallation (on page 168 to 169) 10 Change: Specifications (on page 196) 5 Mans.ioAdditions and Changes to the Setup Guide Change: 2. Included Items (on page 4) The following included item has been added, Included item wes = SS—— Cartridge-sot label (for 4 colors) (2) * With the factory default settings, these labels are affixed to the platen at the location where the front cover opens. Added Operation: Switching the Ink Tube and Affixing a Label This operation is required after "Step 4: Removing the Retainers” on P. 14. This added operation only applies to the case where you are using four colors: CMYK. This operation is not neuen S O ‘About this procedure This procedure must be performed by a suitably qualified service technician. Never attempt to perform this procedure yourself. AXCAUTION _ Leave this work to a suitably qualified worker. This procedure includes work near sources of electrical danger and complex assembly work. Incorrect work may result in injury and mechanical malfunction. Items used in this procedure Included items Cartridge-slot label (for 4 colors)Additions and Changes to the Setup Guide Change: Step 7 : Ink Filling (on page 18 to 20) ‘The operations on P. 18 to P. 20 differ from the actual operations. Replace the information on P. 18 to P, 20 with that shown below. 1. Select the ink type. O Press [uJor [¥] to select the ink type, and then press [ENTER]. SELECT INK TYPEe |/SELECT INK TYPEs TrueViS 70 #|[TrueviIs 4c SAG Light Cyan (Le) oe cc Petree) Eris) fee eet) Truevs.7C v . TrueVis 4¢ v | @ Press [-] or [+] to select [YES], and then press [ENTER]. TrueWEs 70 TruevIs 40 o (VEST NO ESI sod Ifthe ink type is incorrect, s&h Tine procedure @. @ Make sure the drain bottle is installed, and then press [ENTER]. ~ P.19, "Stop 3: Instaling the Drain Botto” INSTALL DRAIN BOTTLE ‘The screen shown below appears, and then the machine starts the preparations for the ink filling, The remaining time for the procedure is displayed on the screen. (The display shown below is an example, "20:00" = "20 minutes and 00 seconds") CAULINe INK... 28: GE Ifthe screen shown below appears here, pouch trays remain in the ink slots and/or in the cleaning liquid slot. Remove all the pouch trays. CHANGE CL-LIQUID FOR WIPER:Additions and Changes to the Setup Guide 2. Fill the machine with ink and cleaning liquid. © Gently shake the ink pouch for each color. rQ —_ SZ & SF o y @ Sethe ink pouch for each color and the wiper cleaning liquid pouch in the pouch trays. M a Nn S | o™ that the hook has caught. @ When the screen shown below appears, set the pouch tray in which you have set an ink pouch in the ink slot whose number is flashing. Check the color names indicated on the ink slots and the ink pouches to set all the pouch trays in their correct positions. Insert the pouch trays as far as they will go, 7 colors (CMYKLcLmLk) 4 colors (CMYK) SET CARTRIDGE SET CARTRIDGE 12345678 2468 FILLING INK >>>3> 28:00Additions and Changes to the Setup Guide When using four colors (CMYK), set the pouch trays in the "2, 4, 6, 8" ink slots. Then, when "1, 3, 5, "is displayed, set the remaining pouch trays in the remaining ink slots. © When the screen shown below appears, set the pouch tray in which you have set the wiper cleaning liquid pouch in the cleaning liquid slot. Insert the pouch trays as far as they will go. SET CL-LIQUID FOR WIPER The screen shown below appears. The remaining time for the procedure is displayed on the screen. (The display shown below is an example. "20:00" = "20 minutes and 00 seconds") FILLING IMK. 3>33> 28: 88Additions and Changes to the Setup Guide © when the screen shown below appears, remove the drain bottle and discard the dis- charged fluid. EMPTY DRAIN BOTTLE! AXCAUTION ASWARNING AXCAUTION Before you detach the drain bottle, be sure to wait for the screen to display [EMPTY DRAIN BOTTLE]. After discarding the discharged fluid, promptly attach the drain bottle to the machine. Failing to follow this procedure may cause discharged fluid to flow out of the machine and spill, soiling your hands or the floor. Never place discharged fluid or ink near an open flame. Doing so may cause a fire. To store discharged fluid temporarily, place it in the included drain bottle or ina durable sealed container such as a metal can or polyethylene tank, and cap the container tightly. Any spillage or vapor leakage may cause a fire, an odor, or physical distress. Dispose of discharged fluid properly, in accordance with the laws in effect in your locale. Discharged fluid is flammable and contains toxic ingredients. Never attempt to incinerate discharged fluid oF discard it with ordinary trash, Also, do not dispose of it in sewer systems, rivers, or streams, Doing so may have an adverse impact on the environment. @ Quickly attach the emt gba hg sea once more. When using four colors (CMYK), repeat steps @ and @ twice. O Press [ENTER]. When the screen shown below appears, filling with ink is finished. SETUP SHEETChanges to the User's Manual Change: Main Menu (on page 14 to 17) When using four colors (CMYK), the "EMPTY MODE" menu is not displayed. (Affected page: P. 15) D+ Tome SUPER CL mena [SUB MENU [THK CONTROL {© [EMPTY MODE, ink CONTROL SSF ean THE CONTROL «@]_© [SUPER CL. «eo [SUPER ot fe ff (+ Toe ENPTY NODE] em ("1)This is only displayed when you are using seven colors (CMYKLeLmLK). The "DRAIN TRAY" menu has been added. (Affected page: P. 16) Conteve Continue Doe (ORAN TRAY] mers Sen _4].©, fanTEaMne a] lelmaimemce “Sl aferce uirer_‘e] Man PAINTENRNCE FEED | Do ele We [SHEET TYPE] menChanges to the User's Manual Change: Out-of-ink Warnings (on page 67) ‘The notification provided when ink runs out differs when using four colors (CMYK) and when using seven colors (CMYKLcLmLK). If Using 4 Colors (CMYK) Lit Indicates that ink still © eemains Flashing Nl Indicates that ink has SO tumour Ws Off indicates an ink pouch O that is currently not 2 a If both inks of the same color run ut, the numbers of the col tteante A oc fone ink cartridge of the same colot run 0! me cnt Qheeuns using the other ink cartridge. ‘When all nk cartridges of the same color tun out, printing pauses and a warning beep sounds. If Using 7 Colors (CMYKLcLmLk) Lit Indicates that ink stil O remains Flashing SLi, Indicates that ink has Han ink runs out, the numbers of the color that has run out flash. ‘When an inkruns out, printing pauses (unless the factory default settings have been changed.) anda warning beep sounds.Change: Super Cleaning (on page 95 to 97) When using four colors (CMYK), the "EMPTY MODE" menu is not displayed. Therefore, the procedure for entering the "SUPER CLEANING” menu differs. eo INK CONTROL » screen shown below. INK CONTORL «e SUPER CL. i Press [MENU]. ; @ Press [y] several times to display the screen shown below. : MENU e i SUBMENU » @ Press [+] once, and then press [¥] several times to display the screen shown below. SUB MENU rs Changes to the User's Manual When using seven colors (CMYKLcLmLk): Press [>] then [¥] to display the When using four colors (CMYK): Press [+] to display the screen shown below. Change: Cleaning the Wiper Tray and Replacing the Tray Pads (on page 102 to 105) The operations shown in steps @) and @) under not occur, so these steps have been deleted. iscard the discharged fluid." on P. 103 do @ auickly attach the emptied drain bottle to the machine once more. @ rss [ENTER]. ZXCAUTION When theChanges to the User's Manual Change: Determining What Happens When Ink Runs Out (on page 158) ‘When using four colors (CMYK), the “EMPTY MODE" menu is not displayed. Therefore, the details on this page are limited to the case in which you use seven colors (CMYKLoLmLK). Change: Procedure from Preparing to Move to Reinstallation (on page 168 to 169) ‘The procedure has been changed as shown below. Replace the information on P. 168 to P. 169 with that shown below. Before moving the machine, dispose of the discharged fluid and secure the print heads in place. Attempting to ‘move the machine without first performing these preparations may result in damage to internal components, due to leaking ink or damage to the print heads. rta + Once the arrangement to transfer the machine is complete, move the machine promptly, and turn on the power immediately after the machine is relocated. f you leave the machine without turning on the power, the deposited inkis coagulated, andit may resultin problems such as clogging ofthe printheads. + When moving the machine, keep it at a temperature between 5 to 40°C (41 to 104°F) and at relative humidity between 20 to 80% (with no condensation). Failure to do so may result in breakdown. + Handle the machine with care when moving, keeping it level (not tited at an angle) and preventing i from striking other objects M a n S, j 0 1, Enter the menu for discharging the wiper tray cleaning liquid Ss Press [MENU]. s Press [¥] several times to display the screen shown below. MENU 1 SUB MENU » @ Press [e] once, and then press [¥] several times to display the screen shown below. SUB MEMU e MAINTENANCE » Press [r] once, and then press [¥] several times to display the screen shown below. MAINTENANCE = > Glide Once the machine is filled with wiper cleaning liquid, the following screen is displayed and the power turns on. SETUP SHEET Change: Specifications (on page 196) "Four colors (cyan, magenta, yellow, and black)" has been added to the ink colors. ‘TrueViS INK 500 ce pouch Seven colors (cyan, magenta, yellow, black, light cyan, light magenta, and ight black) Four colors (cyan, magenta, yellow, black) 15[Roland Roland DG Corporation