Scribd
Upload
39 views2 pages

Trafic Ii: Fitted With Hinged Door With Ladder Manufactured Up To 31st December 2002

This technical document provides repair procedures for a ladder mounting issue on a TRAFIC II vehicle. The ladder mounting inserts on the hinged door are moving. The recommended operation is to remove the ladder, replace the inserts with new inserts, and refit the ladder using the new bolts and nuts supplied in the ladder kit. The document warns that only the new bolts from the kit should be used. Additional information is provided on obtaining replacement parts, required time for the repair, and coding for claims completion.

Uploaded by

Jean Luc Breton
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
39 views2 pages

Trafic Ii: Fitted With Hinged Door With Ladder Manufactured Up To 31st December 2002

This technical document provides repair procedures for a ladder mounting issue on a TRAFIC II vehicle. The ladder mounting inserts on the hinged door are moving. The recommended operation is to remove the ladder, replace the inserts with new inserts, and refit the ladder using the new bolts and nuts supplied in the ladder kit. The document warns that only the new bolts from the kit should be used. Additional information is provided on obtaining replacement parts, required time for the repair, and coding for claims completion.

Uploaded by

Jean Luc Breton
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

BEIGE TECHNICAL NOTE

EDITION ANGLAISE
FEBRUARY 2005
77 11 339 262 4506P
Service 00429
Type

TRAFIC II JL0 X

fitted with hinged door


with ladder manufactured up to 31st December 2002

56A LADDER MOUNTING ON HINGED DOOR

●
Engine: XXX Basic manual: XXX
●
Gearbox: XXX

TECHNICAL INFORMATION Description of the operation


– Remove the ladder on the hinged door.
Customer complaint – Replace the inserts.
– Ladder mounting inserts on the hinged door are – Refit the ladder on the hinged door in accordance
moving. with the assembly instructions supplied with the
ladder nuts and bolts kit.
Possible cause
– Link between the ladder and hinged door. WARNING
It is essential to use the new bolts supplied in the
Fault finding ladder nuts and bolts kit.
– Confirm the customer complaint.

Operation to be carried out


– Ladder mounting inserts on the hinged door are
moving.

1 – Movement of the insert


A – New insert
B – New 55 mm long bolt

"The repair procedures given by the manufacturer in this document are based on the All rights are reserved by RENAULT S.A.S.
technical specifications current when it was prepared.
Copying or translating, in part or in full, of this document or use of the service part
The procedures may be modified as a result of changes introduced by the reference numbering system is forbidden without the prior written authority of
manufacturer in the production of the various component units and accessories from RENAULT S.A.S.
which his vehicles are constructed".

© RENAULT s.a.s. 2005


157A
EXTERIOR ACCESSORIES
Hinged door ladder 57A
CLAIM COMPLETION AND CODING Codification items

●
When to take action With PGCS
– Upon receipt of a customer complaint. – Catalogue function:
Description Code
Parts required
Bumper, strips, trims 014
Quantity and description of parts Part no.
1 Ladder nuts and bolts kit 77 11 223 665 – Cause reference: 77 11 223 665

●
Time required Without PGCS
Code Description Time – NITG code: A233
●
7639 Replacement of the inserts 1.0 With or without PGCS
including removal refitting of – Supplier code: 47
the ladder – Customer complaint code: 5S
TOTAL 1.0

57A-2

You might also like