Fire Alarm System

The Intelligent Solution

Leading innovative technology

Safeguarding lives and properties.
Gulf Security Technology Co., Ltd. (GST)
Gulf Security Technology Co., Ltd, GST, is a key GST has established extensive R&D facilities in
player in the Asia fire and security industry and a Beijing and Qinhuangdao in northern China. It
trusted provider of comprehensive fire system constantly strives to develop innovative new
technologies and products. GST’s factory in
solutions around the world. It is a subsidiary of
Qinhuangdao is a large manufacturing base
Carrier (Carrier Global Corporation), a leading
producing intelligent electronic products that
global provider of innovative HVAC, refrigeration, incorporate innovative technology. To ensure
fire, security and building automation technolo- superior product quality, it has advanced manu-
gies. facturing and inspection equipment and strong
capabilities in quality control and process man-
GST provides a wide range of fire products and
agement.
customized fire system solutions tailored to the
needs of different industries. With a sales infra- GST has earned a range of national and interna-
structure that covers many countries and tional certificates of conformity to standards such
regions, and includes a China-wide network of as China’s CCC, the international UL, the global
more than 120 sales offices and several logistics LPCB, Europe’s CE, etc.
centers, GST has become an important part of
Carrier’s global business.
To satisfy the needs of its global customer base,
Contents EN54 Addressable
Products
P02 / EN54 Addressable Products
P24 / EN54 Conventional Products
P33 / UL Listed Products
P47 / Gas Release Control Products
P51 / Explosion Proof Products
P58 / Gas Detector
P60 / Power Supply Unit FIRE
SYSTEM
FAULT
COMMON
FAULT

POWER
FAULT
DISABLED

F.P.E.
FLT/DIS
TEST MODE

DELAY
MODE
POWER ON

SILENCE

PRE-ALARM S/C SOUNDER DIRTY EVACUATE

FLT/DIS FLT/DIS DETECTOR

P62 / 1
BROWSE

4 VIEW
FAULT
2

5
LOG

TEST
3

6
MODE

LOCK
TAB ACK/MUTE

SILENCE

7 VIEW 8 ENABLE 9 EVAC

DISABLE /DISABLE SYSTEM

P64 / Value Added Unit

* 0 ENTER ESC RESET

P66 / System Diagram

P69 / Emergency Voice Evacuation
P79 / Emergency Telephone Products

GST Fire Alarm System

 EN54 Addressable Products EN54 Addressable Products

LC200 P-9905
Loop Card For additional 2nd loop USB Printer Interface

P-9930 P-9960
RS232 card for PC connection CAN Class B Network Card

GST200N

Overview
GST200N Intelligent Fire Alarm Control Panel includes GST200N-1, and GST200N-2.
GST200N-1 is single loop panel, possible to be expanded the 2-loop version GST200N-2. They are suitable for small buildings

P-9930ModBus P-9960A
ModBus Card for 3rd party interfacing CAN Class A Network Card
Features
Wide range power supply, 100-240VAC, 50-60Hz
Max. 30 zones. Each zone has its own alarm and fault/disable indicator and a label
Capacity 235 addressable devices
Optional expanded to 2 loops, 477 loop devices
Compatible with GST intelligent and digital products
8X18 characters LCD screen
Non-Volatile memory ensures the data does not loss even if power supply is accidentally removed

Models P-9930TCPIP P-9901A

Model number Description TCP/IP Network Card Panel Printer
GST200N-1 Single loop, English
GST200N-2 Dual loops, English
GST200N-HU Single loop, Hungarian
GST200N-PT Single loop, Portuguese
GST200N-SP Single loop, Spanish
GST200N-IT Single loop, Italian
GST200N-FR Single loop, French
GST200N-TK Single loop, Turkish
GST200N-RO Single loop, Romanian

02 GST Fire Alarm System GST Fire Alarm System 03

 EN54 Addressable Products EN54 Addressable Products

LCIFP8 P-9945RP
Dual-Loop Card For additional loops
RS485 Repeater Card

P-9935 P-9965
RS232 card for PC connection CAN Class B Network Card

GST-IFP8
Intelligent Fire Alarm Control Panel

Overview P-9935ModBus P-9965A

GST-IFP8 Intelligent Fire Alarm Control Panel is modularized multi-loop model, can be expanded to 8 loops (Max. 10 loops ModBus Card for 3rd party interfacing CAN Class A Network Card
without network function). The panel is suitable for small to medium projects.

Features
Max.999 zones, 140 have individual alarm and fault/disable LEDs and a label
8 Class A loops, total capacity of 1936 devices
15X40 LCD screen, assisting the 17 LEDs to display important information
Compatible with full series of GST addressable and digital products
Non-Volatile memory ensures the data does not loss even if power supply is accidentally removed

P-9935TCPIP P-9904
Models
TCP/IP Network Card USB Printer Interface
Model number Description
GST-IFP8 English
GST-IFP8-PT Portuguese
GST-IFP8-HU Hungarian
GST-IFP8-FR French
GST-IFP8-IT Italian
GST-IFP8-SP Spanish
GST-IFP8-TK Turkish

04 | GST Fire Alarm System GST Fire Alarm System 05

 EN54 Addressable Products EN54 Addressable Products

GST852RP
LCD Repeater Panel

Overview

be connected with GST addressable panels through RS485 links.

Features
Big size LCD display with backlight
Compatible with all GST intelligent panels
GST-NRP00 Mute and lamp test
Electrically addressing
Network Repeater Panel

Overview

alarm system.

Features
Provide remote display and control of system
Password protected access levels
8X18 characters LCD screen GST8903
15 LEDs to display important information
Functional control of network panels
Intelligent Graphic Repeater Panel
Network-wide operation: Acknowledge, Silence, Reset
Flush-mount or surface-mount structure
Meet network protocol by selecting suitable network card Overview

P-9960 P-9960A location clearly. This addressable repeater is possible to be connected with GST addressable panels through RS485 links.
CAN Class B Network Card CAN Class A Network Card

Features
Up to 100 LED indication points
Local buzzer alarm and mute
Custom Graphical layout to project requirement
Programmable to display zones or individual device
Programmable to indicate Fire, action and Fault conditions
A3, A2, A1 and A0 sizes

06 | GST Fire Alarm System GST Fire Alarm System 07

 EN54 Addressable Products EN54 Addressable Products

DI-9101E DI-9102E DI-9103E I-9104

Intelligent Combination Heat Intelligent Photoelectric Smoke Intelligent Rate of Rise and Intelligent Ultraviolet Flame Detector
Photoelectric Smoke Detector Detector Fixed Temperature Heat Detector

The multi-sensor combines both The optical detector is designed The dual heat detector can provide
Overview Features
smoke and heat detections to build based on light scattering technology
fast and reliable performance. with high performance chamber, temperature status by semiconductor High sensitivity, reliable performance, dust-proof,
2 smoke sensitivity levels can be suitable for detecting slow burning or heat sensor. damp-proof and corrosion-proof
set. Heat detection is based on both 3 detection classes can be set A1R, Three sensitivity levels
FT & RR. 2 sensitivity levels can be set. A2S & BS.
Built-in microprocessor stores 14 history data
Self-diagnostic
Overview time to minimize losses as much as possible.
The detectors can be installed onto the common detector
base DZ-03.
panels. With digital communication, the detectors can raise fast alarm signal within 1 second, and much more control can be
processed.
The detectors can be installed onto the common detector base DB-01.
A remote indicator C-9314P can be connected to each detector.

Features
DZ-03
Strong environmental adaptability due to drift compensation Common Detector
Self-diagnostic Base
Reed switch test
Fire LED allows 360° viewing

C-9314P DB-01
Remote Indicator Common Detector
Base

08 | GST Fire Alarm System GST Fire Alarm System | 09

 EN54 Addressable Products EN54 Addressable Products

DI-9204E
Digital Manual Call Point

Overview Features
I-9105R
DI-9204E digital manual call Re-settable (non-breaking glass)
point adopts the latest digital loop via special key
protocol, compatible with GST Dual activation indication
Electronically addressed
Overview Friendly installation and test
mount type. A back box is supplied Wiring before termination
smoke detector that can be used as Addressable or Conventional. With excellent built- for surface mounting.
in microprocessor, the detector can carry out system adjustment, drift compensation

application conditions. The detector is suitable to historical buildings, warehouses, D-92WPB

large storages, shopping malls, leisure centers, exhibition halls, hotel lobbies, printing
houses, clothing factories, museums and prisons.
Water Proof Box
distance less than 40 meters, and 4 pieces are prepared for long distance up to 100
meters Overview Features
D-92WPB Weather Proof Box is
for application of manual call point of manual call point
outdoor installation to provide

proof box is able to protect the Clear and durable PC cover

manual call point from unwanted Surface mounting enables the
activation. Furthermore, it is also installation easily
Features 60mm hole distance and enough
Wide operating voltage range, large monitoring areas RP-9105 damage. internal space to suit most types
Combination of the emitting and receiving part makes mounting easy and optical Internal space is designed to suit of European style MCP
pathway accurate most types of European style MCP. Reserved place for additional
micro-switch, battery, buzzer, etc
The detector can calibrate easily, which ensures a single person complete

Self-diagnostic function can monitor the internal fault

Drift compensation for factors changing, such as a certain of dust accumulation,
positional excursion and ageing transmitter
D-92FC
Electronically addressed by programmer
Flip Cover
Attractive and decent appearance

Overview Features
Material: PMMA
installed with D series manual call Dimension: 87 X 92 X 20 (mm)
point, to build a double action of the Thickness: 1.7mm
MCP, prevent from accident trigger
operation.

10 | GST Fire Alarm System GST Fire Alarm System | 11

 EN54 Addressable Products EN54 Addressable Products

Overview
I-9300
with conventional or non-addressable equipment.
Addressable Single Input Module The working mode of input module can be changed by hand hold programmer. It is suitable for connecting Flow Switch, Zonal
The I-9300 input module is loop powered, for receiving Valve, Fire Pump, and etc.
normally-open or normally-closed contact signal. For The zone monitor module has a wide range of active threshold, to suit most conventional detectors and manual call points.
normally-open signal, the input cable can be monitored with The working mode of output module can be changed by hand hold programmer. The dry contact output mode is suitable
EOLR. for controlling Elevator, Fire Door, etc or interfacing to 3rd party system. The power output is suitable to drive conventional

The modules are surface mount type with bottom cable entry. A back box B-9310 should be used for surface cabling.

Features

I-9319 Self-diagnostic
LEDs for fault and active indication
Addressable Zone Monitor Module Two part plug-in construction with base mounted termination allows easy installation and connection
Intelligent interface can be addressed and plugged in to base at time of commissioning
The I-9319 monitor module is designed to connect
conventional detectors into addressable system, powered
by external 24VDC. Maximum 25 conventional detectors
can be connected to in each zone.
It is also useful to monitor equipment status with both active
B-9310
and fault signals Back Box

I-9301
Addressable Single Output Module
The I-9301 output module is suitable to drive conventional

in 4-wire mode by external 24VDC power supplying, and

also possible to provide dry contact output in loop powered
mode. Maximum 1A output current can be controlled in
4-wire mode.

12 | GST Fire Alarm System GST Fire Alarm System | 13

 EN54 Addressable Products EN54 Addressable Products

DI-9309
Addressable Multi-Channel Interface

Overview
An integrated solution for application of multi-input signals, saving
mounting space and installation cost.
Each output channel occupies an individual address and receives
start command from FACP, energizes the related relay, gives dry
contact output. Each input is corresponded to one address to
receive the state signal and transmit it to FACP. The quantity of
channels can be set by jumpers.

I-9300S I-9301S Features

Max. 16 channels of independent inputs. The quantity can be set as required
Addressable Input Interface Addressable Output Interface
Two channels of independent dry contact outputs
Loop powered addressable input interface, designed to 3-18 consecutive addresses, changing with selected channel quantity
monitor dry contact signal. Power supply monitored
Cable monitored for open circuit and short circuit

Overview

I-9305
Small size, suitable to be installed in back box
Cable monitored for open circuit and short circuit Voice Alarm Zone Control Module

Built-in microprocessor processes messages intelligently

Overview
The I-9305 Voice Alarm Zone Control Module is designed to

Overview possible to monitor the power supply, output circuit, report fault in
case of abnormal condition.
The I-9303 module occupies two addresses, each address can be controlled Set as auto feedback mode, the module can transmit feedback
independently, energizes the relative relay and light the indicator. Each address
corresponds to one input. After receiving feedback signal from controlled alarm broadcasting.
equipment, the module transmits feedback message to FACP.

Features
Features
Input signals: 75VDC, 100VDC VA signal or 24VDC power
Built-in microprocessor processes messages intelligently Connect input port (XF+, XF-) with output port (SP+, SP-) when receiving start signal from the control panel
I-9303 Providing two input channels, working mode can be set normally open and
normally closed through handhold programmer
Electrically addressed, can be programmed on site by handhold programmer
Loop-powered
Output circuit monitored. Report fault message when the output circuit is short or broken
Addressable Dual I/O Module Plug-in structure Plug-in structure

14 | GST Fire Alarm System GST Fire Alarm System | 15

 EN54 Addressable Products EN54 Addressable Products

Features

DI-9300E Self-diagnostic
Digital Single Input Module LEDs for fault and active indication Loop-powered
Digital communications with Panels
The DI-9300E digital single input module is loop powered, designed to receive Low power consumption
normally open or normally closed switch signals, and transmitting the signals to Loop powered (except for DI-9319E and DI-9305E)
Ground fault detection (Need to work with the compatible FACP)

DI-9301E
Digital Single Input and Output Module

The DI-9301E digital single input and output module is loop powered, occupy I-9401
one or two loop addresses, provides dry contact output (normally open and/or
Addressable Sounder Strobe

transmits to FACP. The input and output can be programmed to monitor and
Overview

DI-9305E attention or evacuate in case of emergency.

Digital Single Riser Output Module

Features
The DI-9305E digital single riser output module powered by loop and external
Red Plexiglas lens, hi-light red, striking, long-life
to end devices. Able to connect conventional VADs or voice alarm system
speakers, relay capacity 2A@30VDC or maximum 60W 70V/100V audio Sound level over 85dB
speakers. Two part plug in structure for easy installation

Overview
DI-9319E I-9403 Intelligent Sounder Strobe and I-9404
Digital Zone Monitor Module
devices, can be controlled directly by loop
The DI-9319E digital zone monitor unit, occupy one address, powered by command following preprogrammed equations.
loop and external 24V, it is designed to connect conventional detectors into The sounder strobe provides pre-alarm/alarm

while the sounder provides sound only.

and displays the address of the module. Maximum 30 conventional detectors or
manual call points can be connected to each module. The module also provides I-9403 I-9404
a FORM-C dry contact output with the capacity of 2A @ 30VDC Features
Intelligent Sounder Strobe Intelligent Sounder
programmer
16 programmable tones with 16 programmable tones with
Overview normal/low power consumption normal/low power consumption
Two parts construction with base mounted
termination allows easy installation
mode, powered by loop or external mode, powered by loop or
16 programmable alarm tones
interface with conventional or non-addressable equipment. The working mode of input module can be changed by hand hold 24VDC source. external 24VDC source.
Optional Evacuate + Alert mode
programmer. It is suitable for connecting Flow Switch, Zonal Valve, Fire Pump, and etc. The zone monitor module has a wide Strobe provided by high intensity
Optional loop powered or external 24VDC
range of active threshold, to suit most conventional detectors and manual call points. The working mode of output module can be LED cluster
powering
changed by hand hold programmer. The dry contact output mode is suitable for controlling Elevator, Fire Door etc. or interfacing It also can be programmed works
Optional power saving mode or normal
in Light or sound and Light +sound
mode
mount.

16 | GST Fire Alarm System GST Fire Alarm System | 17

 EN54 Addressable Products EN54 Addressable Products

C-9503E
C-94DB
Deep Base Loop Isolator

Use with I-9403 I-9404 I-9407

C-9403 C-9404 for Surface Overview
Cable Entry C-9503E Loop Isolator is the protection facility for
addressable loop, can isolate the shorted circuit from the
complete loop to ensure normal operation of other parts and
locate the isolated part. The isolator is applicable to all kinds

Features
Polarity-sensitive external connections. Input and output can be used inversely without direction
Delayed power-up to output end devices, avoids strong transient current when the load is heavy
Plug-in structure

DI-9405 DI-9406
Addressable Sounder Base Addressable Flashing Beacon Base

16 programmable tones, powered by loop. Share 1 address 16 programmable tones, powered by loop. Share 1 address
with detector in 2-address mode, or individual control in with detector in 2-address mode, or individual control in
single-address / double-address mode single-address / double-address mode DC-9504E DC-9503E
Flash light provided by high intensity LED

Base Mount Isolator Short Circuit Isolator

Overview Isolator base to replace DB-01 common base, compatible Module type isolator to be installed and terminated
with DI series detectors individually
be controlled directly by loop command following preprogrammed equations.
The sounder bases are “sandwich” type, can be easily inserted between the standard base DB-01 and detector.
Overview
Loop Isolator is the protection facility that can isolate the trouble part from the whole loop in case of short circuit occurs, to ensure
Features the normal operation of other parts and locate the isolated part.
The base mounted isolator is compatible with DI-91xxE detectors.
Three programmable modes
16 selectable tones
Sandwich structure for easy installation. No additional cable required
Features
Isolates faulty part of the loop in the event of a short circuit
Automatically reset once the fault has been cleared
LED status indicator
Support Class A and Class B loop connection
Maximum 128 isolators can be connected to each loop. Maximum 50 devices between two isolators.

18 | GST Fire Alarm System GST Fire Alarm System 19

 EN54 Addressable Products EN54 Addressable Products

CAN100H-4 CAN100H-8 CAN100H-16

CAN Hub CAN Hub CAN Hub CAN Hub

4 Routes 8 Routes 12 Routes 16 Routes

Overview

connected in star topology.

GST-100
Features
Intelligent Fire Alarm Control Panel
Communication Distance: 3000 meters
Nodes capacity of each branch: 112
Overview Total system capacity based on panel models

operation and maintenance, which make it ideal for smaller systems.

Features

Class A loop, maximum capacity of 128 addressable devices

122×32 lattice LCD assisting the LED indicators to display important information
Non-volatile memory ensuring system data not lost on shutdown of power
3 relay outputs available which are SOUNDER OUTPUT (R+ and R-), ALARM OUTPUT and FAULT OUTPUT
CAN100F CAN100S
Fiber Optic Converter CAN Relay
P-9943
RS485 Communication Card Overview Overview
For connecting repeater panel or network
CAN100F is used to convert CAN signal to Fiber- The CAN100S is used to extend CAN network distance.
optic, possible to expand communication distance up And when the network nodes are over limit, the relay can
to 25km. expand system capacity.

Features Features
Transmission distance extends Max. 25 km Increase 3000 meters of network distance
Preventing against electromagnetic interference Expand network nodes capacity. Max. 112 nodes under
each relay

20 | GST Fire Alarm System GST Fire Alarm System | 21

 EN54 Conventional
EN54 Addressable Products

Products
P-9910B
Hand Held Programmer

Overview
In GST intelligent system, all addressable devices are electronically addressed. P-9910B Hand Held Programmer is the tool for
programming. It can also be used to read the parameters and set the working mode of those devices.

Features
Hand held unit, portable tool
Convenience operation
Quadruple digit alphanumeric LCD display
Low-consumption hibernation and power saving function
Low battery indication
WEEE & RoHS Compliant

P-9903
Loop Relay Module

Overview

area, the signal may need to be protected. The P-9903 loop relay module can provide such functions.

Features
Enhance loop appearance of distance and reliability
Increase 1000 meters of loop distance
Maximum 2 pieces of relays can be connected in serial
Opt-isolated output signal, resistant to industrial interference
Output supports Class B loop connection only
WEEE & RoHS Compliant

22 | GST Fire Alarm System

 EN54 Conventional Products EN54 Conventional Products

DP-9907
Active End of Line

Compatible with DC series conventional detectors

Overview
GST102A GST104A GST108A GST116A
connection continuity even if a detector is removed, and provide faulty indication at the same time, so that
Conventional Fire Alarm Panel the downstream devices of the missing detector is still operational.
The AEOL is compatible with all GST conventional panel, and compatible with addressable zone interface
I-9319.
Overview A diode base is required for each detector instead of standard base, DZ-03D is suitable for C range
detectors, DB-01D is suitable for DC range detector.

or corridor. Beside the ordinary EOLR cable monitor method, the AEOL solution can keep cable continuity even with detector
removed.

Day/Night mode, Output Program, Delay Output, Repeater Link, etc.

Mains supply, 220/230VAC, 50/60Hz

2/4/8/16 zones. Each zone can have maximum 15 conventional detectors
Compatible with GST conventional products
Integrated charger and battery management program, fully comply with latest EN54-4 standard requirement
Easy operation to enable/disable zones, sounder outputs and alarm output
Output programmable for interlink between zones and sounder outputs, alert or evacuate tone, with or without delay
Alarm output and Fault output are available for integrating into third party system

Dimension: 380mm x 320mm x 108mm

RB102A RB104A RB108A RB116A

Relay Board for GST102A Relay Board for GST104A Relay Board for GST108A Relay Board for GST116A

24 | GST Fire Alarm System GST Fire Alarm System | 25

 EN54 Conventional Products EN54 Conventional Products

GST-RP16
Conventional Repeater Panel

Overview
The GST-RP16 repeater panel is compatible with GST102A/4A/8A/16A conventional panels. It is powered from FACP directly,
providing Zonal Fire and general Fault indication
DC-9101E DC-9102E DC-9103E
Conventional Combination Heat Conventional Photoelectric Smoke Conventional Rate of Rise and Fixed
Max. 16 zones Photoelectric Smoke Detector Detector Temperature Heat Detector
Dimension: 280mm x 110mm x 46mm
The multi-sensor combines both The optical detector is designed The dual heat detector can provide
smoke and heat detections to build based on light scattering technology
fast and reliable performance. with high performance chamber, temperature status by semiconductor
2 smoke sensitivity levels can be suitable for detecting slow burning or heat sensor.
set. Heat detection is based on RR. 3 detection classes can be set A1R,
2 sensitivity levels can be set. A2S & BS.

Overview

With the new designed smoke chamber and intelligent program, the detectors have the ability of drift compensation and dust
resistance.
The detectors can be installed onto the common detector base DB-01. DB-01D will be suitable for connecting with Active End
of Line Unit DP-9907.
A remote indicator C-9314P can be connected to each detector.

Features
GST101
Strong environmental adaptability due to drift compensation
Conventional Fire Alarm Panel Self-diagnostic
Reed switch test
Fire LED allows 360° viewing
Overview

Mains supply, 220/230VAC, 50/60Hz

Zone capacity 15 conventional detectors
Compatible with GST conventional products
Dimension: 210mm x 297mm x 90mm

26 | GST Fire Alarm System GST Fire Alarm System | 27

 EN54 Conventional Products EN54 Conventional Products

C-9104
DB-01 Conventional Ultraviolet Flame Detector

Common Detector Base

Overview

as much as possible.
The detectors can be installed onto the common detector base DZ-03.

DB-01D Features
Diode Detector Base High sensitivity, reliable performance, dust-proof, damp-proof and corrosion-proof
Self-diagnostic

Co-operate with DP-9907, keep loop continuity even if a

detector is removed.

DZ-03D
Diode Detector Base

Co-operate with P-9907, keep loop continuity even a detector is removed.

DP-9907
Active End of Line

Co-operate with DB-01D, keep loop continuity even if a

detector is removed.
DZ-03
Common Detector Base

C-9314P
Remote Indicator

28 | GST Fire Alarm System GST Fire Alarm System | 29

 EN54 Conventional Products EN54 Conventional Products

C-9401
Conventional Sounder Strobe

Overview

signal when powered by 24VDC, to draw attention or evacuate in case of

emergency.

Features
Red Plexiglas lens, hi-light red, striking, long-life
Sound level over 85dB
Two part plug in structure for easy installation

DC-9204E GST-JL
Innovation Manual Call Point Alarm Bell

Overview Overview
DC-9204E innovation manual call point is non-addressable. The bell has a simple structure and red coated steel casing,
It alarms by pressing the glass. It can be simply connected with novel pattern and easy installation. It is applicable to

manufacturers. This MCP is suitable for public places. as large and medium sized buildings, provides clear and
continuous alarm sound. C-9403 C-9404
panel. Conventional Sounder Strobe Conventional Sounder
Features 2 selectable tones 2 selectable tones
Features Strobe provided by high intensity LED cluster
24VDC power, 23mA operation
Re-settable (non-breaking glass) via special key 6” bell, 95dB@3m
Dual activation indication
Friendly installation and test
Overview
Wiring before termination
signals when 24VDC supplied.

Features C-94DB
Two parts construction with base mounted termination
Deep Base
allows easy installation
2 selectable alarm tones Use with I-9403
I-9404 C-9403
C-9404 for
Surface Cable
Entry

30 | GST Fire Alarm System GST Fire Alarm System | 31

UL Listed Products
UL Listed Products

GST-IFP4M
Intelligent Fire Alarm Control Panel

Overview
GST-IFP4M Intelligent Fire Alarm Control Panel complies with UL864 standard with features of easy installation, operation and

system for most applications.

Features
7-inch Touch Screen
Wide range power supply 100-240V 50/60Hz
Multi languages: Standard English language and other regional languages such as Portuguese, Spanish, Russian, etc.
Support 1-6 loops in Class A style (additional battery box is required for 5 or 6 loops application)
242 addressable devices per loop mixing various types of devices, Max. 1452 addresses
History records of 100,000 events

“Walk test”, silent or audible

PAS (Positive Alarm Sequence) per point
Report device type mismatch and duplicated loop address
CAN/Fiber Networking, Panel grouping
Connecting with BMS via Modbus Card

GST Fire Alarm System | 33

 UL Listed Products UL Listed Products

PR-400
LC401 LC402 Thermal Printer

Single Loop Card Dual Loops Card

connected through RS232. It can print all or customized real time system
events or system log of the control panel manually or automatically, easy to
operate and convenient for checking.

GST-MNA2C
P-9966A P-9983 Network Annunciator
CAN Class A Network Card Fibre Network Card

connect with GST-IFP4M panel via CAN network, easy for installation,
operation, and maintenance. The powerful CPU, inbuilt Linux OS and touch-
screen provide a user-friend operation interface.

Features
Receive message and send command (Reset, Silence, ACK etc.) through
P-9956-ModBus MP-401 network
Network interface: CAN, Class A
ModBus Card for 3rd party interfacing Redundancy CPU Card LCD display unit of 800 x 480, 7.0” color TFT LCD
Capacitive Touch screen

Password and key-protected nonvolatile memory

User programmable password

P-9981 P-9981F GST-MNA2F

Zone Display Panel Zone Display Panel
Network Annunciator

connect with GST-IFP4M panel via Fiber-Optic network, easy for installation,
operation, and maintenance. The powerful CPU, inbuilt Linux OS and touch-
screen provide a user-friend operation interface.

Features
P-9982 P-9982F Receive message and send command (Reset, Silence, ACK etc.) through
Zone Display and Control Panel Zone Display and Control Panel network
Network interface: Fiber-Optic, Class-A type
LCD display unit of 800 x 480, 7.0” color TFT LCD
Capacitive Touch screen

Password and key-protected nonvolatile memory

User programmable password

34 | GST Fire Alarm System GST Fire Alarm System | 35

 UL Listed Products UL Listed Products

GST-M200 DI-M9101 DI-M9102 DI-M9103

Intelligent Fire Alarm Control Panel Intelligent Combination Intelligent Photoelectric Smoke Intelligent Rate of Rise and
Heat Photoelectric Smoke Detector Detector Fixed Temperature Heat Detector

The multi-sensor combines both The optical detector is designed The dual heat detector can provide
mounted FACP is suitable for small to medium project. smoke and heat detections to build based on light scattering technology FT
The panel is possible to be powered by 100VAC to 230VAC, fast and reliable performance. with high performance chamber,
50/60Hz. 2 smoke sensitivity levels can be suitable for detecting slow burning or temperature status by
set. Heat detection is based on both semiconductor heat sensor. Rate of
FT & RR.
Overview certain applications.

Overview
card, the 2nd loop will expand system extra 242 addresses. DI-M91xx series UL listed intelligent detectors adopt the latest digital loop protocol, compatible with GST UL listed intelligent
The panel is programmable by keypad, or by PC through P-9930 communication card.
To link with 3rd control can be processed. The detectors can be installed onto the common detector base DB-M01. A remote indicator C-9314P
can be connected to each detector.

Features
Features

Optional USB printer interface Strong environmental adaptability due to drift compensation
Optional graphic monitor station connection Self-diagnostic
Walk Test function Reed switch test
Positive Alarm Sequence (PAS) per point Fire LED allows 360° viewing
Advanced user friendly programming software including ‘Fuzzy Logic’

LC200 P-9930 P-M9930Modbus C-9314P DB-M01

Loop Card RS232 Communication RS232 ModBus Remote Indicator Common Detector
Card Communication Card (With BP-9314 Back Base
Plate)

36 | GST Fire Alarm System GST Fire Alarm System | 37

 UL Listed Products UL Listed Products

DI-M9300
Digital Single Iuput Module
DI-M9319
The DI-M9300 single input module is designed to receive normally open Digital Zone Monitor Module

control panel (FACP) through signaling line circuit (SLC) loop to FACP. The DI-M9319 Digital Zone Monitor Module is designed to connect

30 conventional detectors or manual call points can be conneted to each

module. The module also provides a FORM-C dry contact output with the
capacity of 2A @ 30VDC,0.35PF

DI-M9301
Overview
Addressable Single Output Module
interface with conventional or non-addressable equipment.
DI-M9301 Digital Single Input and Output Module provides dry contact The working mode of input module can be changed by hand hold programmer. It is suitable for connecting Flow Switch, Zonal
Valve, Fire Pump, and etc.
alarm control panel, also possible receives switch signal (dry contact) from The zone monitor module has a wide range of active threshold, to suit most conventional detectors and manual call points.
The working mode of output module can be changed by hand hold programmer. The dry contact output mode is suitable
for controlling Elevator, Fire Door, etc or interfacing to 3rd party system. The power output is suitable to drive conventional

The modules are DIN-Rail or surface mount.

Features

DI-M9305 Self-diagnostic
LEDs for fault and active indication
Digital Single Riser Output Module Digital communications with Panels
Low power consumption
DI-M9305 Digital Single Riser Output Module is designed to control the Loop powered
Ground fault detection (Need to work with the compatible FACP)
Din Rail mount, Surface mount
UL864, NFPA [70, 72] approved

38 | GST Fire Alarm System GST Fire Alarm System | 39

 UL Listed Products UL Listed Products

GST-MBX22 GST-MBX29

Module Box
DI-M9204
GST-MBX22 and GST-MBX29 module boxes are optional accessories for Digital Manual Call Point
both UL and LPCB D series din-rail mount modules centralize installation,
include mounting strip and cable trunking. GST-MBX22 able to store up to
10 pcs small size or 6 pcs big size modules, GST-MBX29 able to store up Overview Features
to 20 pcs small size or 12 pcs big size modules. DI-M9204 digital manual call point adopts the latest digital Re-settable (non-breaking glass) via special key
Dual activation indication
Electronically addressed
mount type. A back box is supplied for surface mounting. Friendly installation and test
Wiring before termination

D-93CT1

Din-rail Module Transparent Cover 1U

D-93CT1 is the optional transparent cover for 1 U size module (DC-9503E,

DI-9300E,DC-M9503 and DI-M9300) to cover the module and terminals

DC-M9503 DC-M9504
Short Circuit Isolator Base Mount Short Circuit Isolator

Module type isolator to be installed and terminated Base type isolator can be used as a detector base, or stand
D-93CT2 individually alone with a cover

Overview
Din-rail Module Transparent Cover 2U
Loop Isolator is the protection facility that can isolate the trouble part from the whole loop in case of short circuit occurs, to
ensure the normal operation of other parts and locate the isolated part.
DC-93CT2 is the optional transparent cover for 2U size module (DI-9301E, DI-
The base mounted isolator is compatible with DI-M91xx detectors.
9305E,DI-9319E,DI-M9301 DIM9305 and DI-M9319) to cover the module and
terminals

Features
Isolates faulty part of the loop in the event of a short circuit
Automatically reset once the fault has been cleared
LED status indicator
Support Class A and Class B loop connection
Maximum 128 isolators can be connected to each loop. Maximum 50 devices between two isolators.

40 | GST Fire Alarm System GST Fire Alarm System | 41

 UL Listed Products UL Listed Products

DC-M9204
Innovation Manual Call Point

DC-M9101 DC-M9102 DC-M9103 Overview

DC-M9204 conventional manual call point is compatible with UL listed conventional panels or addressable modules. The
Conventional Combination Heat Conventional Photoelectric Smoke Conventional Rate of Rise and Fixed
Photoelectric Smoke Detector Detector Temperature Heat Detector

The multi-sensor combines both The optical detector is designed The dual heat detector can provide
Features
smoke and heat detections to build based on light scattering technology
fast and reliable performance. with high performance chamber, temperature status by semiconductor Re-settable (non-breaking glass) via special key
2 smoke sensitivity levels can be suitable for detecting slow burning or heat sensor. Rate of rise detection Dual activation indication
Friendly installation and test
temperature. applications. Wiring before termination

Overview

alarm system together with UL listed conventional panels or addressable modules.

The detectors can be installed onto the common detector base DB-M01.
A remote indicator C-9314P can be connected to each detector.

Features

Strong environmental adaptability due to drift compensation

Self-diagnostic
P-9910B
Reed switch test
Hand Held Programmer
Fire LED allows 360° viewing

Overview
The P-9910B hand Held Programmer is the programming tool for all GST addressable devices and some of conventional
C-9314P DB-M01 devices. It is also the tool to set sensitivities, working modes and other parameters.
Remote Indicator Common Detector
(With BP-9314 Back Base
Plate) Features
Hand held unit, portable tool
Convenience operation
Quadruple digit alphanumeric LCD display
Low-consumption hibernation and power saving function
Low battery indication

42 | GST Fire Alarm System GST Fire Alarm System | 43

 UL Listed Products UL Listed Products

DC-M9413 Series Sounder Strobe DC-M9414 Series Sounder

Wall Mount Sounder Strobe Wall Mount Sounder

Overview Overview

Features Features

Temporal or steady sounder output

High dB or low dB output
This strobe features an enhanced synchronization circuit to comply with the latest requirements of UL 1971 Signaling Devices
for the Hearing Impaired.
Synchronized operation requires that you connect the DC-M9413 Series Wall Mount Sounder Strobe to a NAC output set for
Synch Mode, or to a separate DC-M9410 Signal Synchronization Module. Models
Model number Description
DC-M9414R Sounder, red
Models DC-M9414W Sounder, white

Model number Description

DC-M9413R Sounder-strobe, red
DC-M9413W Sounder-strobe, white

44 | GST Fire Alarm System GST Fire Alarm System | 45

 UL Listed Products UL Listed Products

DC-M9416 Series Sounder Strobe

Ceiling Mount Sounder Strobe

Overview

Features

or steady sound output, and strobe signal output.

The candela output setting is locked in place and remains visible after

This strobe features an enhanced synchronization circuit to comply with

DC-M9415 Series Strobe the latest requirements of UL 1971 Signaling Devices for the Hearing
Impaired.
Wall Mount Strobe Synchronized operation requires that you connect the DC-M9416 Series
Ceiling Mount Sounder Strobe to a NAC output set for Synch Mode, or to
a separate DC-M9410 Signal Synchronization Module.
Overview

Models
Features Model number Description
DC-M9416R Sounder-strobe, red, with FIRE marking
DC-M9416W Sounder-strobe, white, with FIRE marking

This strobe features an enhanced synchronization circuit to comply with the latest requirements of UL 1971 Signaling Devices
for the Hearing Impaired.
Synchronized operation requires that you connect the DC-M9415 Series Wall Mount Strobe to a NAC output set for Synch
Mode, or to a separate DC-M9410 Signal Synchronization Module.

Models
Model number Description DC-M9410
DC-M9415R Strobe, red
DC-M9415W Strobe, white Signal Synchronization Module

The DC-M9410 Signal Synchronization Module provides precision synchronization

for the following sounders and strobes:
DC-M9413 Series wall mount sounder strobes
DC-M9414 Series wall mount sounders
DC-M9415 Series wall mount strobes
DC-M9416 Series ceiling mount sounder strobes

46 | GST Fire Alarm System GST Fire Alarm System | 47

Gas Release Control
Gas Release Control Products

Products

GST301
Conventional Gas Extinguishing Control Panel

Overview
The GST301 is standalone gas extinguishing control panel, provides 2 conventional detection

areas. The Duty and Standby Cylinder control can be automatic and manual controlled, with
adjustable delay timer
The Built-in PSU and Charger can support 24 hours standby and 30 minutes activation period.

Mains supply: 220/230VAC, 50/60Hz

Backup Battery: 7AH/24VDC
Sounder Output: 0.5A/24VDC
Release Output: 2A/24VDC, Pulse
Dimension: 300mm x 350mm x 110mm

GST Fire Alarm System | 49

 Gas Release Control Products Gas Release Control Products

C-9317
Emergency Gas Override Control

C-9317 Emergency Gas Override Control is used to control

the start and stop of gas extinguishing system, usually
installed in areas to be protected.
The control button is compatible with GST301 conventional
and GST303/306 addressable gas release control panels
Dimension: 144mm x 90mm x 58.5mm

GST303 GST306 C-9318

Addressable Gas Extinguishing Control Panel Addressable Gas Extinguishing Control Panel Gas Extinguishing Warning Indicator

Overview C-9318 Gas Extinguishing Warning Indicator is the

accessory of a gas extinguishing system, usually installed
above the entrance of the protected area.
control panels, provide 3 or 6 protection zone outputs. The warning indicator is compatible with GST301
The gas panel sits directly on addressable loop, achieving extinguishing control by carrying out the intelligent equations on the conventional and GST303/306 addressable gas release
control panels
External 24VDC power supply is required. Mains supply: 24VDC
Dimension: 348mm x 159mm x 29mm

Mains supply: 24VDC

Cylinder Output: Pulse (5s) or Continuous output, Max. 2A
Release Indicator: 300mA/24VDC
Sounder Output: Dry-contact, 1A/24VDC C-9329
Dimension: 385mm x 444mm x 14mm
575mm x 444mm x 14mm
Gas Extinguishing Control Relay Module

C-9329 Gas Extinguishing Control Relay Module is to co-

operate with GST303 or GST306 Gas Extinguishing Control
Panel, to carry out gas release solenoid control and cable
monitoring.
Dimension: 120mm x 80mm x 43mm

50 | GST Fire Alarm System GST Fire Alarm System | 51

 Explosion Proof Products

Explosion Proof Products

DI-9204Exd
Digital Flame-proof Manual Call Point

Overview
DI-9204Exd MCP is applicable to vessels, Zone 1 and 2 Operating Voltage: 24V
of explosive gas atmosphere and Zone 20, 21, and 22 of Ingress Protection: IP65
explosive dust atmosphere. It is also suitable for outdoor Material: ZL102 aluminum alloy, red
application. Dimension: 219mm x 129mm x 95mm
The MCP can work at addressable mode to connect with Ex Mark: II 2 G Ex db IIB T6 Gb
GST’s addressable FACP, or work at non-addressable II 2 D Ex tb IIIC T80°C Db
mode to connect with 24VDC power and output dry-contact
alarm signal.

D-9105RExd

Overview
D-9105RExd Beam Detector is applicable to either Operating Voltage: 24V
commercial areas or hazardous industrial areas, such as Ingress Protection: IP66
Zone 1 and 2 of explosive gas areas and Zone 21 and 22 of Material: Stainless steel, metallic gray
combustible dust areas. Dimension: 344mm x 240mm x 212mm
The detector is able to be used as addressable mode Ex Mark: Ex dIIC T6 Gb/Ex tD A21 IP66 T85

GST Fire Alarm System | 53

 Explosion Proof Products Explosion Proof Products

DI-9104Exd
Digital Flame Proof UV Flame Detector
DC-9101(IS) DC-9102(IS) DC-9103(IS)
Overview Intrinsically Safe Combination Heat Intrinsically Safe Photoelectric Smoke Intrinsically Safe Rate of Rise and
Photoelectric Smoke Detector Detector Fixed Temperature Heat Detector
Operating Voltage: 24V
Ingress Protection: IP66 Ex Mark: Exib II CT6 Gb Ex Mark: Exib II CT6 Gb Ex Mark: Exib II CT6 Gb
Material: ZL102 aluminum alloy, silvery grey
smoldering stage. This detector can be applicable to zone 1 Dimension: 147mm x 106mm x 92mm 3 smoke sensitivity levels can be set.
and 2 of explosive areas. FT and RR can be set
The detector is able to work either in addressable mode

in non-addressable mode to transmit signal by outputting Overview

The Intrinsically Safe Conventional Detectors are applicable to Zone 1 and Zone 2 of areas with explosion-proof requirement
in petroleum and chemical industries. With explosion proof interface I-9332, the detectors can be connected into GST
addressable system. Max.10 pieces (mixed) can be linked to each interface.
A common base DB-01(IS) is available for the detectors.

DB-01(IS)
Intrinsically Detector Base

D-9107RExd
Digital Flame Proof Dual IR Flame Detector

Overview
The detector uses two pyroelectric infrared sensors to Operating Voltage: 24V
Ingress Protection: IP66
light signal at two bands of infrared spectrum through Material: Stainless steel, metallic gray
individual processing channels. The detector is applicable to Dimension: 166mm x 235mm x 199mm
Ex Mark: II 2 G Ex d IIC T6 Gb
dust. II 2 D Ex tb IIIC T80°C Db
The detector is able to be used as addressable mode

54 | GST Fire Alarm System GST Fire Alarm System | 55

 Explosion Proof Products Explosion Proof Products

DC-9202(IS) I-9332
Intrinsically Safe Manual Call Point Intrinsically Safe Interface

Ex Mark: Exib II CT6 Gb

Overview

Overview Any of the following detectors and call points alarms will be reported to the panel shown as an address.
The built-in Zener Barrier provides energy limitation to the hazard area.
The DC-9202(IS) Intrinsically Safe Conventional MCP is applicable to Zone 1 and Zone 2 of areas with explosion-proof
requirement in petroleum and chemical industries.
With explosion proof interface I-9332, the detectors can be connected into GST addressable system.

DC-9403(IS) DC-9404(IS) I-9333

Intrinsically Safe Conventional Sounder Strobe Intrinsically Safe Conventional Sounder Intrinsically Safe Interface

Ex Mark: Exib II CT6 Gb Ex Mark: Exib II CT6 Gb

Overview

Overview the following detectors and call points alarms will be reported to the panel shown as an address.
The Intrinsically Safe Conventional Sounder/Strobe are applicable to Zone 1 and Zone 2 of areas with explosion-proof The built-in Zener Barrier provides energy limitation to the hazard area.
requirement in petroleum and chemical industries. With explosion proof interface I-9333, the detectors can be connected into
GST addressable system. Each interface can only drive 1 sounder/strobe.

56 | GST Fire Alarm System GST Fire Alarm System | 57

 Gas Detector
Explosion Proof Products

GST-AS-200 GST-AS-300
Zener Safety Barrier Zener Safety Barrier
Ex Mark: [Ex ib Gb]II C Ex Mark: [Ex ib Gb]II C

Overview
GST-AS-200 and GST-AS-300 Zener Safety Barriers are used to associate with intrinsically safe products. It provides protection
by limiting the energy into explosive environment. It ensures the energy output always be controlled under a safe value in case
of any kind of fault condition.
The 2 lines of GST-AS-300 are both fused, as of GST-AS-200 has only 1-line fused.
Max. Output Voltage: Uo=28V
Max. Output Current: Io=93mA

58 | GST Fire Alarm System

 Gas Detector

Power Supply Unit

I-9602LW-LPG
I-9602LW-NG
Addressable Gas Detector

- Natural Gas

Overview
I-9602LW Addressable Gas Detector is used to detect leakage of home use combustible gas (LPG, Natural Gas ) in such areas
as houses, hotels and apartments. When leakage is detected, the detector will generate high buzzer alert sound, and provide a

Operating Voltage: 24VDC

Alarm Threshold: LPG: 2000×10-6 (10%LEL)
NG: 3000×10-6 (6%LEL)
Ingress Protection: IP30

C-9602LW-LPG
C-9602LW-NG
Conventional Gas Detector

- Natural Gas

Overview
C-9602LW Conventional Gas Detector is used to detect leakage of home use combustible gas (LPG, Natural Gas ) in such
areas as houses, hotels and apartments. When leakage is detected, the detector will generate high buzzer alert sound, and

Operating Voltage: 220VAC 50/60Hz

Alarm Threshold: LPG: 2000×10-6 (10%LEL)
NG: 3000×10-6 (6%LEL)
Ingress Protection: IP30

60 | GST Fire Alarm System

 Specified Detector
Power Supply Unit

PSU24-5
PSU24-5A
Intelligent Power Supply Unit

Overview

external 24VDC power supply. The supply source is 230 VAC, 50/60 Hz. Nominal output load is 5A/24VDC. The built-in charger
and maintenance-free sealed lead acid batteries ensure the standby supply.

Mains Supply: 230VAC+10%/-15%, 50/60Hz

Rated Output: 5A/26.5V DC
Backup Battery: 12Ah/24VDC
Dimension: 400mm×318mm×128mm

PSU24-10
PSU24-10A
Intelligent Power Supply Unit

Overview

external 24VDC power supply. The supply source is 110-230 VAC, 50/60 Hz. Nominal output load is 10A/24VDC. The built-in
charger and maintenance-free sealed lead acid batteries ensure the standby supply.

Mains Supply: 110VAC ~ 230VAC, 50/60Hz

Rated Output: 10A/26.5V DC
Backup Battery: 24Ah/24VDC
Dimension: 520mm×350mm×156mm

62 | GST Fire Alarm System

 Value Added Unit

R6601 R6602
Conventional Smoke Detector Conventional Heat Detector

Overview
The 4-wire type detectors are usually applied to security system, or standalone with relay output. Detector provides a normally-
open contact, which will be closed when detector alarms.

Operating Voltage: 12VDC (9.6VDC ~ 14.4VDC)

Output Relay: 30VDC/1A
Cabling Method: 4-wire, 2 for power, 2 for output
Ingress Protection: IP23
Smoking Room

Office
Wash Room

S-9102R S-9102N
Lobby
Stand Alone Smoke Detector

Overview 1st Floor

The S-9102R provides a polarized N/O contact output (photoelectrical isolated) for further application.
The S-9102N provides network function, suitable for group usage of the detector. All networked detectors will sound together
when anyone of them alarms.

Operating Voltage: 2-piece of AA LR6 alkaline batteries

Battery Life: 3 years
Detection Area: 60-100m2
Alarm Sound: 80dB@3m

64 | GST Fire Alarm System

 System Diagram
Value Added Unit

GST-GMC
Graphic Monitor Center

Overview

support 8 remote client stations plus local monitor station, making complete monitoring and control. Also with OLE for Process

includes GST200, GST200-2, GST200N, GST5000 and GST-IFP8.

Hardware Requirement
CPU: Pentium IV 1.7G or above
Minimum free Hard disk: 10GB
Memory: 512M or above

Operation System
Windows XP Professional (IE6.0 or above}
Windows 7 Windows 10

DEF-KEY DEF-KEY-TIMER
USB Dongle

Overview

data. Unauthorized person without the dongle key is not possible to start the software (DEF3.0) or create communication
between Def software and panel

66 | GST Fire Alarm System

 EN Product System Diagram EN Product System Diagram

Sounder MCP Isolator UV Flame Heat Smoke

I-9403 DI-9204E DC-9503E I-9104 DI-9103E DI-9102E Intelligent FACP Network Repeater Intelligent FACP
GST200N GST-NRP00 GST-IFP8

Input Module
DI-9300E Addressable Combination
DI-9101E
Loop
CAN Network
Input/Output Module Monitor Module Beam Class A
DI-9301E DI-9319E I-9105R

Conventional
Detectors
Combination Smoke Heat
DC-9101E DC-9102E DC-9103E

Mini Input Mini Output Gas Detector

Intelligent FACP Intelligent FACP
I-9300S I-9301S I-9602LW GST200N GST200N

Intelligent FACP
GST-IFP8
Addressable Graphic Station
Loop GST-GMC3.0

WAN or LAN

Graphic Station
GST-GMC3.0
Graphic Station
Output Interface Input Interface GST-GMC3.0
Gas Release I-9333 I-9332
Panel
GST303
Graphic Station
LCD Repeater
Intrinsically Safe GST-GMC3.0
GST852RP
Intrinsically Combination
Safe Sounder

Intrinsically Safe
Smoke

Emergency Intrinsically Safe Graphic Repeater

Switch
C-9317
Heat GST8903 CAN Network is possible to be Class A , Class B or Star Topology. Suitable network cards and accessories are available.
Solenoid Valve
External 24VDC Power Supply may be required by some devices.
Intrinsically Safe
Max. 8 Remote Users can be connected to the host PC through WAN or LAN
Warning Indicator
C-9318 MCP

68 | GST Fire Alarm System GST Fire Alarm System | 69

 UL Product System Diagram UL Product System Diagram

MCP Combination
DI-M9204 DI-M9101
Smoke Combination Single Input Intelligent FACP
DI-M9102 DI-M9101 DI-M9300 Intelligent FACP Network Annunciator GST-IFP4M
GST-IFP4M GST-MNA2C/GST-MNA2F

Isolator
Conventional Heat
DC-M9503
Detectors DI-M9103

CAN/Fiber Network
Smoke
DC-M9102
Combination
DC-M9101
Heat
DC-M9103 MCP Class A
DI-M9204

Monitor Module
DI-M9319
Single I/O Isolator USB
DI-M9301 DC-M9503 Database/ FM
upgrade

External printer
Auxiliary 24V Output

Single Riser Module Intelligent FACP Network Annunciator Intelligent FACP

DI-M9305 GST-IFP4M GST-MNA2C/GST-MNA2F GST-IFP4M
Smoke Combination Intelligent FACP
DI-M9102 DI-M9101 GST-IFP4M

Graphic Station
NAC Circuit

GST-IFPx-GMC

Signal
Synchronization Sounder Strobe Sounder Strobe
DC-M9410 DC-M9413R DC-M9413W LAN
Graphic Station
GST-IFPx-GMC

Graphic Station
GST-IFPx-GMC

MCP
DI-M9204

Sounder Strobe Graphic Station

Sounder Strobe GST-IFPx-GMC
DC-M9413R
DC-M9416R

Isolator
DC-M9503

Need additional CAN/Fiber network card to be installed into panel for networking, maximum networking capacity 250 Panels and
network annunciators.
Smoke Heat Single Input
DI-M9102 DI-M9103 DI-M9300 Maximum 10 Remote Users can be connected to the host PC through LAN.
Maximum output of Panel NAC+ Auxiliary output is 2.5A

70 | GST Fire Alarm System GST Fire Alarm System | 71

Emergency Voice
Emergency Voice Evacuation System

Evacuation

GST-VES
Emergency Voice Evacuation System

Description
GST Voice Evacuation System (GST-VES) is used to make emergency voice announcements to people inside a building.

The GST-VES system consist one GST-MP panel and several GST-DP panels. The GST-MP Master Panel operates in
conjunction with the Fire Alarm Control Panel (FACP) in a building to provide an automatic response to life safety emergencies.

for 6 channels of simultaneous audio. This provides for evacuation, alert stay-in-place, or other public address announcements
and automatic messages.
GST-DP Distributed Panel is connected to GST-MP in a voice evacuation system, receiving the command and voice signal from

Features
True Multiplex 6 Channel Audio
Integrated Fire Phone
Integrated 2 Channel Digital Message Repeater
Live Microphone Page to any zone
Fast RS-485 Communication Protocol
Fully Supervised
Easy Installation and Operation
Natural Sound Voice Recordings
Built in Alarm and Alert Signals
Up to 4 Minute Message Capacity
Integrates with GST Fire Alarm Panel
Interfaces with non GST Addressable and Microprocessor based Fire Alarm Panels
2 Minute Message Restart on Microphone Key

GST Fire Alarm System | 73

 System Components System Components

MFP
Master Fire Phone Card

GST-MFH-A
Master Fire Phone Handset Assembly

GST-MP GST-DP GST-IFP8-VT

Master Panel Distributed Panel

GST-MP is the Master Panel of GST GST-DP is the Distributed Panels The GST-IFP8-VT is the intelligent
SLC
voice evacuation system. The GST- in the system. All GST-DP are
MP provides the operating interface, connected to a master panel emergency voice evacuation system. Switch LED Card
control and audio signals, and via RS485 line and provide the
supervision to the distributed panels. supervised 25V or 70V speaker the GST-MP and GST-DP to activate
GST-MP also provides interface to the evacuation alarm automatically.
the FACP either by RS232 or dry The connection between FACP and control at Master Panel. Add SLC cards if more than 16 switch/LED are required.
contact. GST provides two models of Each GST-DP is powered individually GST-MP may be RS232 or hard
basic master panels. and with backup battery. wired digital input.
GST-MP16 has all basic features with GST provides 4 basic models: GST-IFP8-VT is built for integrated
16 switches/LEDs and 16 inputs for GST-DPS50, single channel, 50W with GST-MP16x to form a single
FACP. GST-DP50, dual channel, 50W
GST-MP16x is same as GST-MP16 GST-DPS100, single channel, 100W voice evacuation controls.
without cabinet.
Both GST-MP16 and GST-MP16x
GST-DP100, dual channel, 100W
All these models have 4 class B
GST-IFP8-VT may have max 8 loops,
with 242 addresses on each loop.
SSC
phone option. Switch Scan Card
phone, more switch/LED and input All these models can be expanded panel network.
as you desire. GST-MP16 can be for
Accessory on master panel. Each SSC card controls up to 8 switch/LED cards. One SSC
card is included in the basic GST-MT master panel.
panel, and GST-MP16x shall be 4 class A or 8 class B speaker circuit.

control panel.

74 | GST Fire Alarm System GST Fire Alarm System | 75

 System Components System Components

GST-XI GVX-BA
Extended Input Interface card

Accessory on master panel. One XI card provides 16 additional inputs to master panel.
Maximum 7 XI can be connected to one II card. needed.

MBK
Mother Board Relays FPO2
Fire Phone Interface Terminal
One MBK card provides 4 class “B” speaker circuits. And two MBK cards provide 8 “class B”
or 4 “class A” speaker circuits in one distributed panel. One MBK card is included in basic
GST-DP panel.
3rd and 4th FPI Fire Phone Interface in GST-DP.

FPI
GVX-50E / GVX-100E
Fire Phone Interface

phone circuits) can be installed in one GST-DP.

XFMR
Transformer

is added to GST-DP.

76 | GST Fire Alarm System GST Fire Alarm System | 77

 System Components

P-9935EVAX Part No. Product Description

Default
QTY
Max. QTY Remark

Master panel, with 16 inputs, 16

GST-MP16 N/A N/A N/A
Switches/EDs, with Cabinet
Communication Card
Master panel, with 16 inputs, 16
GST-MP16x N/A N/A N/A
Switches/EDs, without Cabinet
Distributed panel, Dual channels 50
This card provides interface between GST-IFP8-VT FACP and GST-MP via RS232 port. It is GST-DP50 N/A N/A N/A
Watts, 4 Class B speaker circuits
not required if the dry contact interface is employed. Distributed panel, Single channel 50
GST-DPS50 N/A N/A N/A
Watts, 4 Class B speaker circuits
Distributed panel, Dual channels 100
GST-DP100 N/A N/A N/A
Watts, 4 Class B speaker circuits
GST- Distributed panel, Single channel 100
N/A N/A N/A
DPS100 Watts, 4 Class B speaker circuits
Optional components for Master Panel, More than 16 switches and
SLC Switch LED Card 1(1)(2) 64

SSC Switch Scan Card 1(1)(2) 8 Optional components for Master Panel ,Every 8 SLC needs one SSC

MFP Master Fire Phone Card 0 1 Optional components for MP

GST-MFH-A Master Fire Phone Handset Assembly 0 1 Optional components for MP

Optional components for Distributed Panel, 4 supervised Class “B” Fire

FPI Fire Phone Interface 0 4
Phone circuits per FPI
Optional components for Distributed Panel, More than 1 FPI is required
FPO2 Fire Phone Output Adapter 0 3
in a Distributed Panel, one FPO2 card is needed for each
1(4) 1(4) Optional components for GST-DPS50, if converts from GST-DPS50 to
GVX-50E
2(3) 2(3) GST-DP50,one GVX-50E is needed
1(6) 1(6) Optional components for GST-DPS100, if converts from GST-DPS100
GVX-100E
2(5) 2(5) to GST-DP100,one GVX-100E is needed
Optional components for Distributed Panel, One additional MBK needed
MBK Mother Board Relays 1(3)(4)(5)(6) 2
for 8 Class “B” or 4 Class “A” Speaker Circuits on Distributed Panel.
Interface card between GST-IFP8 or GST-IFP8-VT and Master panel,
P-9935EVAX RS232 Communication Card 0 1
Provides communication between GST-IFP8 panel and GST-MP
1(4) (6) 1(4) (6) Optional components for convert single channel Distributed panel to
XFMR Transformer
2(3) (5) 2(3) (5)
Optional components for Mater panel, connect, connect with II Input
XI Extended Input Interface 0 7
Interface card, provides additional 16 inputs per XI card

(1)

(2)

(3)

(4)

(5)

(6)

Communications: RS-485 Standard, 1M Baud rate

Primary Supply: 220VAC
Backup Battery: 7AH/24VDC(GST-MP), 17AH/24VDC(GST-DP)
Electrical Ratings: All Circuits @ 24VDC

Maximum Cable Length: 4,000 feet, #16 AWG, between panels, 50,000 feet in the overall system.
Recommended Cable: 16 or 18 AWG, (Low Capacitance) UTP Unshielded-Twisted pair.

78 | GST Fire Alarm System GST Fire Alarm System | 79

 System Diagram System Diagram

GST-VES system diagram System Diagram - GST-VES with GST-IFP8-VT

| GST Fire Alarm System GST Fire Alarm System | 81

Emergency Telephone
Emergency Telephone Products

Products
GST-FT8WN
Fire Telephone Panel

Overview

specialized for emergency communication. The panel

is networkable up to 8 panels. Call from handset will be

after not answered by the dedicated panel.

Each zone is fully monitored of cable fault. Failure of one

Mains supply: 24VDC

Zone Capacity: 8
Installation Method: Wall-mount

Dimension: 400mm x 280mm x 100mm

GST-FT24N
Fire Telephone Panel

Overview

dedicated panel.

Mains supply: 24VDC

Zone Capacity: 24
Installation Method: 19” Rack-mount

Dimension: 482.5mm x 132.5mm x 225mm

GST Fire Alarm System | 83

 Emergency Telephone Products note

P-9911(H)
Handsfree Speaker Fire Telephone

The P-9911(H) handset is wall mounted, compatible with

communication over a dedicated hard wired system

Dimension: 160mm x 80mm x 35mm

P-9911(F)
Fixed Fire Telephone Handset

Dimension: 234mm x 146mm x 60mm

P-9911(M)
Mobile Fire Telephone Handset

P-9911(M) is a mobile type emergency telephone handset,

on duty. The person can go to the nearest jack sockets,

panels located in the command center.

Usually 2-5 handsets are recommended according to
amount of telephone sockets.

P-9911(J)
Fire Telephone Jack

P-9911(J) telephone socket normally locates at the landing

levels of all core stairwells and escape routes. The person
on site with a mobile handset may just plug & talk to the
control center. The unit should be mounted in a suitable and

Dimension: 85mm x 85mm x 12mm

84 | GST Fire Alarm System

IMPORTANT: This publication is a generic version in which product
information is shown for informational purposes only and does not
constitute a specific commitment or guarantee. We are constantly
pursuing the improvement of product technology to improve product
performance, for which we reserve the right to adjust the configuration
and technical information of the related products without notice. In
addition, the description of system performance in this publication
applies only to the usual situation. As a result, there may be a variety of
unpredictable special circumstances in the real world, so the realization
of the relevant product performance will depend on the professional
investigation and analysis and the design plan. Please contact us and
we will be happy to provide you with professional advice.

EMEA Headquarters SINGAPORE HONG KONG

UTC Fire & Security EMEA BVBA UTC Fire & Security Singapore Pte Ltd Chubb Hong Kong Limited
(Europe, Middle East & Africa) Add: 28 Teban Gardens Crescent, Singapore Add: 10/F, Octa Tower, 8 Lam Chak Street,
Pegasus Park - De Kleetlaan 3 1831 608926 Kowloon Bay, Kowloon, Hong Kong
Diegem · Brussels, Belgium Tel: (65) 6506 1616 Tel: +852 2705-8800
Tel: +32 (0)2 725 1120 Fax: (65) 6298 7310 Fax: +852 2765-8014
Fax: +32 (0)2 721 4047 Email: wenbinn.teoh@carrier.com E-mail: fire@chubb.com.hk
E-mail: emea@carrier.com

TAIWAN MEA INDIA

UTC Fire & Security Ltd., Taiwan UTC Climate, Controls & Security Systems UTC Climate Controls Security
Add: 15F., No.156, Sec. 1, Zhongshan Rd., Add: PO Box 30791 Palladium Building 203 & 209 Add: 3rd Floor, Block 3, Prestige Blue Chip #9,
Banqiao Dist., New Taipei City 220, Taiwan Dubai, United Arab Emirates Hosur Road, Bangalore -560029, India
Tel: +886 2 8964 3777 ext. 3236 Tel. +971 4 4199000 Tel: +91-080-43442000
E-mail: Vencent.Kuo@carrier.com E-mail: marketingme@carrier.com E-mail: central.communications@carrier.com

Gulf Security Technology Co.,Ltd

Carrier Global Corporation (Carrier)
12F, Building A, New Bund World Trade Center(I), No.4, Lane 255,
Dong Yu Rd, Shanghai 200126, China
ASIA: Tel: +86 21 38938223 Email: asiasales.gst@carrier.com
EMEA: Tel: +86 21 38938219 Email: emeasales.gst@carrier.com
LA & ANZ: Tel: +86 21 38938217 Email: lasales.gst@carrier.com
China's Contracted Projects Overseas (Chinese spoken only)
Tel: +86 10 65540785 Email: overseasales.gst@carrier.com Version 202004
www.gst.com.cn www.corporate.carrier.com © 2020 Gulf Security Technology Co., Ltd