Type VIII
Multi-tool
simultaneous
machining
for high
productivity
Catalog No. C32 0704
Cincom C32 Type VIII
Unique, servo-control design minimizes the number Main and back spindle
of moving parts, resulting in a highly compact, near simultaneous drilling
maintenance-free turning center. Its patented Simultaneous drilling or tapping
Synchronous-Superimposed functionality allows mul- between main and back spindle
tiple operations to be performed simultaneously. With is possible.
five axes (plus standard C-axis on both the main and
sub-spindle) and an array of fixed and rotary tools.
• For simple or complex geometries to 1.25" diame- Main and back spindle
simultaneous machining
ter 3 12.5" long per chucking
Independent machining can be
• 100% servo driven, complete modular design done simultaneously.
• Built-in main and sub spindles
• 6 axes simultaneously controlled (X1,Y1, Z1, X2, Z2, Z3)
• Space saving tool post design (patent pending)
• Mounts up to 18 tools (live and stationary) for front
and back work Main spindle turning,
drilling and back spindle
• Enhanced synchronized-superimposed operation simultaneous drilling
(patent pending) During main and back spindle
• PC based controller, with PC card slot and net- simultaneous drilling, main spin-
working capability dle turning by gang tool post is
possible.
• Displaced thermal effects for high precision over
long operating periods
• Full-open cover speeds setups and maintenance
• Cincom System M6B controller
• On machine program check (patent pending) Back Spindle Gang Tool Post
X1 Y1
• Machine status memory and display (patent pending)
• 3-dimensional interference check Guide Bush
• Internet service and support Z1
Z3
MODULAR DESIGN & SERVO CONTROL
Citizen-Cincom’s modular design and 100% servo
control provide advantages unavailable in other
machine designs: Z2
X2
• Lower Maintenance: belts, hydraulics, pressure
sensors, limit switches, pneumatics and other
maintenance components are minimized or com-
pletely eliminated. With fewer parts to wear, down-
time and maintenance are held to a minimum.
Main Spindle
• Better Performance: fewer moving parts means Turret Tool Post
less vibration and greater precision. Faster rapid
traverses, higher spindle speeds and shorter accel-
eration/deceleration times enhance productivity.
• Shorter Production Cycles: servos allow shorter
chip-to-chip tool changes, quicker tool replacements,
and high speed rapid traverses.
1)
Front and back rotary tool spindle drive unit Y axis tooling system
C22032U121B
Cross-milling spindle Slitting spindle End-drilling 1-tool holder
End-drilling spindle Inclined-end-drilling spindle Double ended drilling spindle
• Drive unit for face live tools of second gang tool post
2) High Performance
Windows-based NC
• Both front and back live tools rotate clockwise at the
same time—counter-clockwise tools are not required Flexible Operation Panel
for main and back simultaneous drilling
The operation panel’s user friendly
• Fixed type sleeve holder can be mounted to rotary man-machine interface makes the
tool station with dedicated sleeve adapter machine easy to operate.
• Allows two live tools front and two live tools back
C32 On-Line Communications
A PC-based controller connects by modem to
the Cincom website. This can be used to
remotely trouble-shoot, review programs,
obtain on-line help and to download
software or monitor performance.
Standard Accessories MACHINE SPECIFICATIONS Cincom C32 Type VIII
• Rotary guide bushing drive unit • Door switch Maximum machining diameter 32mm [1.25"]
• Guide bushing device • Workpiece separator Maximum machining length 320mm [12.5"] per chucking
• Main spindle chucking device • Back spindle chucking device Main spindle speed 200~8,000 min-1
• Coolant device (level detection function) • Lubrication device (level detection function)
Rotary tool spindle speed 200~5,000 min-1
• Motor driven knock-out device for • Rotary tool spindle on gang tool post
Maximum chuck diameter of the
back machining • Rotary tool spindle drive unit
• Workpiece conveyor back spindle 32mm [1.25"]
Maximum workpiece length for the front
Optional Accessories side collection from the back spindle 145mm [5.7"]
• Rotary tool spindle drive unit for • Chip conveyor Back spindle speed 200~7,000 min-1
front/back face machining • Automatic tool setting device Number of tools to be mounted 18 max.
• Cutoff tool breakage detector • Back long workpiece machining device Turning tools on the gang tool post 5
Standard NC Functions Rotary tools on the gang tool post 4
Second gang tool post 4 main/5 back standard
• NC unit dedicated to the Cincom C series • Product counter display: Up to 8 digits optional: 3 main (1 fixed and 2 rotary)/
• 10.4" color LCD display • Nose R compensation function
4 back (2 fixed and 2 rotary)
• Operating time display • Three-dimensional interference
Tooling size
• Preparation functions check function
• Corner chamfering/rounding function • Back spindle speed change detection Tool (gang tool post) 163163130mm [625"3.625"35"]
• On-machine program check function function Sleeve 25.4mm [1"]
• Main spindle C-axis function • Back spindle C-axis function Chuck and guide bushing models
• Main spindle speed change detection • Main spindle constant surface speed Main spindle collet chuck TF37
function control function Guide bush TD32
• Main spindle chasing function • Automatic power-off function Lego type chuck ER11/AR11, ER16/AR16
• Program work area capacity equivalent • Program storage capacity equivalent Back spindle collet chuck TF37
to 20m tape to 40m tape Rapid feed rate 20 m/min (all axes)
• Thread cutting canned cycle • Multiple repetitive cycle for turning
Motors
• Tool offset pairs 40 • Back spindle 1 degree indexing function
Main spindle drive 3.7/7.5KW
• Main spindle 1 degree indexing function • User macro
• Back spindle chasing function • Tool life management Guide bushing drive 0.75/1.5KW
• Sub-inch command Back spindle drive 1.5/2.7KW
Tool spindle drive of tool post 1 1KW
Optional NC Functions Tool spindle drive of tool post 2 1KW
• Synchronized tapping function • Milling interpolation function Center height 1,132mm [44.5"]
• Differential rotary tool function • Spindle synchronization control function Input power capacity 10KVA
• Back spindle constant surface speed • Canned drilling cycle Weight 3,050kg
control function • Helical interpolation function
• Inclined helical interpolation function • Polygon turning function
C32 Type VIII FLOOR LAYOUT
19.7
Maintenance Area
53.9
Machine Unit Bar Feeder Unit
Operation
23.6
panel
19.7 109.0 19.7
*A
*L
*A and L dimensions vary depending on bar feeder type
Maximum machine height: 71.7 in.
The World Leader in CNC Swiss Turning.
ISO9001:2000
MANUFACTURED BY CITIZEN WATCH CO., LTD.
40 Boroline Road 1801 F Howard Street 17815 Newhope Street, Suite P
Allendale, NJ 07401 Elk Grove Village, IL 60007 Fountain Valley, CA 92708
(201) 818-0100 (847) 364-9060 (714) 434-6224
Visit our web site: www.marucit.com
