Fishing Services
TM
CustomCut Pilot Mill
Diamond Point
Weatherford's CustomCut diamond-point pilot mill can be used to mill a full range
of tubular products. The mill consists of a leading stabilizer (the pilot), which is
sized for the ID of the tubular, and a major diameter section, sized at least 1/4 in.
larger than the coupling OD. The CustomCut diamond-point mill can be dressed
with crushed carbide or with one of the family of CustomCut inserts, as
appropriate for the application.
Weatherford's diamond point CustomCut pilot mill is a product of the company's
MillSmartSM technology—an engineered approach to milling that encompasses a
wide range of proven products, services, and technical resources, developed and
refined by the world's largest and most experienced provider of milling and
fishing services.
Applications
— The CustomCut diamond-point pilot mill is used for milling tubing, casing, liner
hangers, liners, drillpipe, drill collars, wash pipe, or perforated liners.
— CustomCut inserts that are specifically tailored to the operation and to the
capabilities of the surface equipment. For surface equipment or fluids with
limited capabilities, CustomCut 100 series inserts produce small, lightweight
cuttings. For premium fluids and high-volume surface equipment, CustomCut
200 and 300 series inserts maximize milling rates and the life of the pilot mill.
Features, Advantages and Benefits
— Full OD ensures that collars are milled in the same operation, eliminating
creation of junk in the wellbore and extending the life of the pilot mill.
— Optimized alignment of CustomCut insert to proper cutting angle produces
smaller cuttings for better wellbore cleaning and longer life of the mill.
— Longer blades extend downhole cutting time and the life of the mill.
— Insert selection capability optimizes the mill design to the composition of the
tubular being milled and the capabilities of surface facilities, resulting in higher
rates of penetration.
MillSmart technology, featuring CustomCut inserts—because each job is different
Weatherford International Ltd.
515 Post Oak Blvd., Suite 600
Houston, Texas 77027 USA
Tel: 713-693-4000
www.weatherford.com
© 2005 Weatherford. All rights reserved. 3270.00
Fishing Services
TM
CustomCut Pilot Mill
Diamond Point
Specifications Options
Casing Size Top Pin Mill Blade OD Applications Inserts
(in.) Connection (in.) (mm) Surface equipment or 100C
4-1/2 5.250 133.350 fluids with limited capabilities 101C
5 3 1/2-in. 5.813 147.650 200M
5-1/2 Reg. 6.300 160.020 201M
6 6.875 174.625 202M
6-5/8 7.640 194.056 203M
4 1/2-in. High-volume surface
7 7.916 201.066 300M
Reg. equipment and premium fluids
7-5/8 8.750 222.250 301M
8-5/8 9.875 250.825 302M
9-5/8 10.875 276.225 303M
6 5/8-in.
10-3/4 12.000 304.800 304M
Reg.
11-3/4 13.000 330.200
13-3/8 14.625 371.475
Weatherford International Ltd. Weatherford products and services are subject to the Company’s standard terms and conditions, available on request or
515 Post Oak Blvd., Suite 600 at www.weatherford.com. For more information contact an authorized Weatherford representative. Unless noted
Houston, Texas 77027 USA otherwise, trademarks and service marks herein are the property of Weatherford. Specifications are subject to change
Tel: 713-693-4000 without notice.
www.weatherford.com
© 2005 Weatherford. All rights reserved. 3270.00
