0% found this document useful (0 votes)
56 views1 page

Instruction Use of 600326

This document provides instructions for use of a catheter securement dressing device. The device is for single use only and should be applied below the mouth of the drainage tube, avoiding scarred or rough skin. The skin is cleaned and the device is applied, securing the catheter in the holes of the magic lock portion. The catheter is gently tugged to ensure it is securely fastened before use. The device should be replaced if soiled or saturated and properly disposed of after up to 96 hours of use.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
56 views1 page

Instruction Use of 600326

This document provides instructions for use of a catheter securement dressing device. The device is for single use only and should be applied below the mouth of the drainage tube, avoiding scarred or rough skin. The skin is cleaned and the device is applied, securing the catheter in the holes of the magic lock portion. The catheter is gently tugged to ensure it is securely fastened before use. The device should be replaced if soiled or saturated and properly disposed of after up to 96 hours of use.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Catheter Securement Dressing Device

#600326

Instructions for use

or
O

Application
1. Open the immediate package, take out the dressing.
2. Select a location below the mouth of the drainage and avoid scar-ruffle-place. Attention: The tube should be inserted
already.
3. Clean skin surface according hospital standard, remove hair if necessary for sticking more firmly.
4. Peel off one side release paper of the securement device. Put the contact surface stick to the skin with peeling off
outside.
5. Open the strip part of the catheter fixed dressing, make a flat carry of the foley tube,and put it between foam part and
magic lock. Pull small strip through middle part of big one and fixed, same to big strip. If for 3 way foley catheter, fix the
middle one between cross of two strip.
6. Adjust catheter and make it properly locked in the hole position of magic lock, gently press the dressing.
7. Pull the catheter lightly to check the strong degree. Adjust securement device tightness if needed.

Caution
1.For single use only
2.Replace securement device if soiled or saturated in fluid
3.Use of an alcohol swab will ease removal of securement device from the skin
4.Do not use if any sign of product damage is visible
5.Please treat the products after usage according the direction of the hospital or environment protection administration.
6. Can be used for up to 96 hours at normal condition

You might also like