Used Products
IMPLANT - Abutment made of zirconium oxide - Crown - Lithium disilicate - Retentive abutment shape - Posterior tooth -
Vivaglass CEM
VivaglassCEM PL
VivaglassCEM PL is a highly translucent self-curing, radiopaque glass-ionomer cement
OptraStick
Application instrument that features a flexible adhesive tip
Telio CS Inlay
Temporary light-curing filling material for deep inlay preparations with parallel walls and
sealing of implant screw access holes
OptraGate
Allows lips and cheeks to be retracted completely and ensures relative isolation
Ivoclean
The universal cleaning paste Ivoclean effectively cleans the bonding surfaces of
prosthetic restorations after intraoral try-in
OptraPol
OptraPol is excellently suitable for finishing and polishing all popular composite
materials in a single step
Cervitec Plus
The protective varnish containing chlorhexidine and thymol protects exposed root
surfaces and controls bacteria
Ivoclar Vivadent AG, Bendererstrasse 2, FL-9494 Schaan, Liechtenstein
www.ivoclarvivadent.com, Phone +4232353535, Fax +4232353360
Please observe the respective Instructions for Use.
www.cementation-navigation.com
Generated on: 04.01.2023 1
Flowchart Vivaglass CEM
IMPLANT - Abutment made of zirconium oxide - Crown - Lithium disilicate - Retentive abutment shape - Posterior tooth -
Vivaglass CEM
1 Preoperative situation
The abutment is screwed in place.
2 The restoration is tried in
The permanent restoration is tried in. At this stage, the
shade, accuracy of fit and occlusion of the restoration are
checked.
3 The screw access opening is cleaned and sealed.
The screw access opening is thoroughly rinsed with water
spray and dried with oil-free air. Subsequently, the screw
access opening is sealed with cotton wool or a foam pellet
and Telio CS Inlay. For all further treatment steps, relative
isolation of the operating field, e.g. with OptraGate, is
indispensible. A retraction cord may optionally be placed.
Ivoclar Vivadent AG, Bendererstrasse 2, FL-9494 Schaan, Liechtenstein
www.ivoclarvivadent.com, Phone +4232353535, Fax +4232353360
Please observe the respective Instructions for Use.
www.cementation-navigation.com
Generated on: 04.01.2023 2
4 The restoration is pretreated
The restoration is etched with 5% hydrofluoric acid (e.g. IPS
Ceramic Etching Gel) for 20 seconds.
5 Vivaglass CEM is mixed and applied
The Vivaglass CEM powder and liquid are mixed in a 1:1
ratio.
The luting material is applied to the restoration with a spatula
or brush.
6 The restoration is seated and excess cement is removed
The restoration is seated and held in place using light
constant pressure.
Ivoclar Vivadent AG, Bendererstrasse 2, FL-9494 Schaan, Liechtenstein
www.ivoclarvivadent.com, Phone +4232353535, Fax +4232353360
Please observe the respective Instructions for Use.
www.cementation-navigation.com
Generated on: 04.01.2023 3
Once the cement has completely set, excess is removed e.g.
with an implant scaler. The setting time is 4-6 minutes.
7 The completed restoration is finished
Proximal areas are adjusted with finishers and polishers. The
occlusion and functional movements are checked and
adjusted if necessary. The restoration margins are polished
with polishers (OptraPol) or discs.
8 Follow-up care
A thin layer of Cervitec Plus is applied where it is needed
with the help of a Vivadent applicator or a brush. The varnish
sets by itself or with the application of a stream of air.
Ivoclar Vivadent AG, Bendererstrasse 2, FL-9494 Schaan, Liechtenstein
www.ivoclarvivadent.com, Phone +4232353535, Fax +4232353360
Please observe the respective Instructions for Use.
www.cementation-navigation.com
Generated on: 04.01.2023 4
