Excellence in extremes

lence in extremes Excellence in extremes Excellence in e

xtremes Excellence in extremes
 GATE VALVE
MODEL LAC (CIW TYPE) MANUAL

SPECIFICATIONS

MODEL LAC (CIW TYPE) MANUAL

Size 1-13/16” – 7-1/16”

Pressure Rating 2,000 psi – 15,000 psi
Construction Forged body and bonnet.
Type Manual, hydraulic or pneumatic
End Connection Flanged end, weld neck, hub end or
any other end connection as
requested
Design Features Bi-directional, metal to metal seal
between gate and seat
Advantages Easy maintenance.
Interchangeable with CIW valve
D parts.
Good lubrication and venting
system helps the valve with easy
operation.

SEVPL

A DIMENSIONS

Working
Pressures 3000 5000 10,000 15,000
(psi)
Size & Bore
2 1/16 2 9/16 3 1/8 4 1/16 2 1/16 2 9/16 3 1/8 4 1/16 1 13/16 2 1/16 2 9/16 3 1/16 4 1/16 1 13/16 2 1/16 2 9/16 3 1/16
(Inches)

A
14 5/8 16 5/8 17 1/8 20 1/8 14 5/8 16 5/8 18 5/8 21 5/8 18 1/4 20 1/2 22 1/4 24 3/8 26 3/8 18 19 21 23 9/16
(Inches)

B
5 5/8 6 1/2 7 3/8 9 1/8 5 5/8 6 1/2 7 3/8 9 1/2 5 3/4 5 7/8 6 13/16 7 3/4 10 1/16 6 1/8 6 1/8 7 5/16 9 1/2
(Inches)

C
19 N/A 16 13/16 18 7/16 19 19 20 1/2 22 1/4 19 1/2 19 1/2 21 3/8 21 5/16 24 1/4 20 5/8 19 1/2 22 13/16 26 1/8
(Inches)

D
14 14 14 18 14 14 14 18 14 14 14 18 22 14 14 14 18
(Inches)

Weight 180 249 282 450 182 255 360 580 200 250 485 500 850 275 350 800 950
(lbs)

SRIENERGYVALVES GATE VALVE MODEL LAC (CIW TYPE) MANUAL)

 PARTS LIST

1. Handwheel 16. Grease fitting (Body)

2. Bearing Cap 17. Bonnet Gasket
3. Grease fitting Alemite 18. Auto Clave Plug
4. O-Ring (Bearing Cap) 19. Operating Stem
5. Bearing Race 20. Gate
6. Bearing Thrust 21. Retainer Plate
7. O-Ring (Stem Adapter) 22. Seat
8. Stem Adapter 23. Seal, Seat & Body Bushing
9. Stem Pin 24. Alignment Pin
10. Packing Gland 25. Body
11. Packing Stem 26. Name Plate
12. Hex Nut 27. Gate Guide
13. Stud 28. Body Bushing
14. Bonnet 29. Bolt W/Nut
15. Check valve

TRIM CHART
MATERIAL SPECIFICATION FOR SRI VALVES API 6A
MODE LAC (SLAB GATE) (FC)

COMPONENTS
API SERVICE CONDITION STEM BONNET
BODY BONNET STEM GATE SEAT SEAT SEAL
SEAL SEAL
CLASS AA GENERAL ALLOY STEEL FORGED ALLOY STEEL ALLOY ALLOY ALLOY OR SS PTFE PTFE(MOLY 304 Or
NON CORROSIVE OR CASTING FORGING NITRIDED NITRIDED NITRIDED FKM GLASS FILLED ) 316 SS
CLASS BB GENERAL SLIGHTLY ALLOY STEEL FORGED ALLOY STEEL 410SS/ 410SS 410SS PTFE PTFE(MOLY 304 Or
CRROSIVE OR CASTING FORGING 17-4PH NITRIDED NITRIDED FKM GLASS FILLED ) 316 SS
CLASS CC GENERAL MODERATELY 410 SS 410 SS 410 SS Or 410 SS 410 SS PTFE PTFE(MOLY 304 Or
CORROSIVE 17.4 NITRIDED NITRIDED FKM GLASS FILLED ) 316 SS
CO2 PH
CLASS DD ALLOY STEEL FORGED ALLOY STEEL ALLOY 4130/ ALLOY ALLOY Or 410 PTFE PTFE(MOLY 304 Or
SOUR NON CORROSIVE OR CASTING FORGING 4140 NITRIDED SS NITRIDED FKM GLASS FILLED ) 316 SS
NITRIDED
CLASS EE ALLOY STEEL FORGED ALLOY STEEL 410 SS (Or) 410 SS 410 SS PTFE PTFE(MOLY 304 Or
SOUR SLIGHTLY CORROSIVE OR CASTING FORGING 17-4 PH NITRIDED NITRIDED FKM GLASS FILLED ) 316 SS
CLASS EE/C ALLOY STEEL FORGED ALLOY STEEL INCONEL 410SS H.F 410SS H.F PTFE PTFE(MOLY 304 Or
SOUR CO2 HIGHLY CORROSIVE OR CASTING FORGING 718 FKM GLASS FILLED ) 316 SS
CLASS FF 410SS Or 410SS 410SS PTFE PTFE(MOLY 304 Or
SOUR MODERATELY CORROSIVE 410SS 410SS 17.4 PH NITRIDED NITRIDED FKM GLASS FILLED ) 316 SS
H2S NITRIDED
CLASS FF/C SOUR HIGHLY 410SS 410SS INCONEL 410 SS HF 410SS HF PTFE PTFE(MOLY 304 Or
CORROSIVE H2S & CO2 718 FKM GLASS FILLED ) 316 SS
CLASS HH ALLOY STEEL ALLOY STEEL INCONEL INCONEL 718/ INCONEL 718/ PTFE PTFE(MOLY INCONEL
SOUR HIGHLY CORROSIVE FORGING INONEL INONEL 625 718 625 625 FKM GLASS FILLED ) 625
625 Gladded all WITH
HARDFACING HARDFACING
areas areas

SRIENERGYVALVES GATE VALVE MODEL LAC (CIW TYPE) MANUAL)

 EXPANDING GATE VALVE
MODEL WM -MANUAL

SPECIFICATIONS

GATE VALVE WM MODEL(WKM MODEL M STYLE)

THIS TYPE OF GATE VALVE IS BEST SUITED FOR ALL KINDS OF MANIFOLDS, CHRISTMAS TREES, ETC.

Size 1 13/16"- 7 1/16"

Pressure rating 2,000 psi - 5,000 psi
Product specification level PSL 1 – PSL3
Type Manual
End connection Flanged, Threaded or anyother end connection requested
Design features Expanding gate forms tight positive mechanical seal.
Flanged end connection.
Easy to operate with Low operating torque.
Ball bearing is used to operate the stem easily, under the line pressure.
Fittings are provided for body lubrication, bearing lubrication.

Standards API SPEC 6A ISO 10423, NACE MR0175/ ISO 15156.

SRIENERGYVALVES EXPANDING GATE VALVE MODEL WM -MANUAL

 PARTS LIST

01. Handwheel 11. Bearing Spacer Sleeve

02. Body 12. Packing Seat
03. Bonnet 12D. Strip Pickings
04A. Gate 13. Gate Guide
04B. Gate Segment 14. Stud
04C. Spring 15. Hex. Nut
04D. Pins 16. Nut
05. Seat 17. Flat Washer
06. Stem 18. Name Plate (NS)
07. Bonnet Gasket 19. Grease Fitting Alemite
08. Bearing Retainer 20. Grease Fitting, Body
09. Bearing Retainer lock Nut 21. Injection Fitting
10. Bearing Retainer Bushin 22. Thrust Bearing

SRIENERGYVALVES EXPANDING GATE VALVE MODEL WM -MANUAL

 ADJUSTABLE CHOKE
MODEL S-H2

SPECIFICATIONS

ADJUSTABLE CHOKE
Adjustable choke is ideally suited for a broad range of applications. For
wellheads, production manifolds, well testing, choke and kill manifolds,
and well clean up operations.

Size 2 1/16’’ to 4 1/16’’

Pressure rating 2000 psi to 15000 psi
Construction Forged body and bonnet
Design features Flanged, threaded and any other end
connections are available upon request.
PSL PSL 1 to PSL 3
Stainless Steel adjustable choke needle and seat (Tungsten carbide /
ceramic lining needle and seat also available for severe service
application).

TRIM CHART

FOR S-H2 ADJUSTABLE CHOKE

MATERIAL
TRIM
BODY BONNET STEM SEAT or BEAN

AA Carbon Alloy Steel Carbon Alloy Steel Carbon Alloy Steel Stainless Steel

BB Carbon Alloy Steel Carbon Alloy Steel Stainless Steel Stainless Steel

CC Stainless Steel Stainless Steel Stainless Steel Stainless Steel

DD
Carbon Alloy Steel Carbon Alloy Steel Stainless Steel Stainless Steel
22 RC MAX. 22 RC MAX.

EE
Carbon Alloy Steel Carbon Alloy Steel Stainless Steel Stainless Steel
22 RC MAX. 22 RC MAX.

FF Stainless Steel Stainless Steel Stainless Steel Stainless Steel

AVAILABLE IN ABOVE MENTIONED TRIMS WITH 1", 1 3/4" & 2" ORIFICE.

SRIENERGYVALVES ADJUSTABLE CHOKE, MODEL S-H ,

 PARTS LIST

Model S-H2 Choke Adjustable 01. Body

27
03. Bonnet
28
12 04. Bonnet Extension
25
6 10
05. Set Screw W/Nylon Tip
20 06. Wing Nut
24
07. Seal Ring & Back up Ring
16 21 18
08. Seat
3 19 26 09. Gasket Seat
10. Hex Nut
5
23 11. Bleeder Plug
15
12. Lock Washer
20
14 13. Stem
22

4
14. Packing Assembly
15. Stem Sleeve
29
16. Retainer Ring
17. Nut Bushing
7 18. Bonnet Nut
9
8
19. Thumb Screw
13
1
20. Set Screw W/Nylon Tip
21. Rod Wiper
22. Set Screw
11 23. Housing Indicator
17
24. Indicator
25. Handwheel
26. Grease Fitting
27. Hex Bolt
28. Lock Washer
29. Retainer Ring

DIMENSIONS

FLANGE SIZE PRESSURE(PSI) A" B" C"

2 1/16" 5,000 8.00 6.87 21.50

2 9/16" / 3 1/8" 3,000 11.38 8.88 30.00

2 9/16" / 3 1/8" 5,000 11.38 8.88 30.00

C
2 9/16" / 3 1/8" 10,000 11.75 10.38 30.25

SEVPL
4 1/16" 10,000 11.50 9.94 30.12

A 2 9/16" / 3 1/16" 15,000 11.75 10.38 30.06

4 1/16" 5,000 11.38 9.88 30.13

SRIENERGYVALVES ADJUSTABLE CHOKE, MODEL S-H ,

 CHECK VALVE
MODEL LAC (TYPE S-R)

SPECIFICATIONS

CHECK VALVE

These Check valve are predominantly used for drilling and production
service
Pressure rating 5,000 psi to 15,000 psi
Working Temperature -50°F to 250 °F
Specification level PSL -1 to PSL-3
Material Class AA, BB, CC,DD, EE, FF
Construction Forged Body and bonnet
Design features Poppet and other internal seal
interchangeable with OEM model known
as type "R" available in any specified trim.

DIMENSIONS

FACE TO FACE LENGTH (L)

PRESSURE
SIZE
5K 10K 15K 20K

1 13/16 _ 18.25 18 21

SEVPL 2 1/16 14.62 20.5 19 23

2 9/16 16.62 22.5 21 26.5

3 1/8, 3 1/16 18.62 24.38 23.56 30.5

4 1/16 21.62 26.38 29 _

SRIENERGYVALVES CHECK VALVE, MODEL LAC (CIW TYPE S-R)

 PARTS LIST

01. Body
02. Bonnet
03. Retainer
04. Poppet
05. Seat
06. Screw seat
07. Spring
08. Gasket
09. Nut Bonnet
10. Nut Bonnet
11. Stud Retainer
12. Nut Retainer
13. Packing
14. Seal Seat

TRIM CHART

Model LAC ( CIW Type R) Check Valve

A field proven familiar to the user type S-'R' type Check Valve provides interchangeability and reliability.
For operating conditions, trim chart is provided to select a suitable one.
It will be suitable for drilling & production services.
It meets or exceeds API standard and related quality requirements.

MATERIAL

TRIM BODY BONNET POPPET SEAT SCREW,SEAT GASKET

AA Carbon Alloy Steel Carbon Alloy Steel Carbon Alloy Steel Carbon Alloy Steel Carbon Alloy Steel Carbon Alloy Steel

DD Carbon Alloy Steel Carbon Alloy Steel Stainless Steel Stainless Steel Carbon Alloy Steel Stainless Steel

EE Carbon Alloy Steel Carbon Alloy Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel

FF Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel

SRIENERGYVALVES CHECK VALVE, MODEL LAC (CIW TYPE S-R)

 CHOKE MANIFOLD
[SURFACE WELL TESTING]

SPECIFICATIONS

CHOKE MANIFOLD
Four manual valves used to control flow rate and reduce well pressure before flow enters into processing
equipment, five manual valves are used when a bypass needed. Manifold used for oil & Gas well testing and
clean up after drilling and work over operations. Manifold consists of valves, adjustable and positive chokes,
and tool box. All can be third party certified along with skid, with applicable documentation.
Pressure rating 2,000 psi to 15,000 psi
Product specification level PSL1 to PSL 3
Material class AA to HH
Temprature rating -50°F to 250°F
Options All other sizes and specifications available upon request.
Skid mounted if required.
Various configurations can be built to customer requirement and according to
specific applications.

SRIENERGYVALVES CHOKE MANIFOLD

 PARTS LIST

72.0
3
1
1. Valve, 3 1/16” -10k, Manual
2. Choke, 3 1/16”-10k, Adjustable
3. Choke, 3 1/16”-10k, Positive
5
4. Inlet Studded Block, 3 1/16” -10k
SEVPL
1
5. Flange Cross Over, 3 1/16” -10k, 3” 1502 Female Sub
4 6. Flange Cross Over , 3 1/16”-10, 3” 1502 Male Sub
7. Skid , (1 Tool Box )
77.0 8. Ring Gasket
9. Stud
10. Nut
11
11. Outlet Studded Block, 3 1/16” -10k
SEVPL

2 1
6

PLAN VIEW

35.5

12.8

ELEVATION

SRIENERGYVALVES CHOKE MANIFOLD

 DIVERTER MANIFOLD

SPECIFICATIONS

DIVERTER MANIFOLD
Diverter manifold is to divert oil or gas without flow interruption from a separator to burners for disposal, to tank
for measurements or storage or to a production line.

Bore size 1 13/16" - 7 1/16"

Pressure rating 2,000 psi to 15,000 psi
Product specification level PSL 1 to PSL 3
Material class AA, BB, CC, DD, EE, FF, HH
Temprature rating -50°F to 250°F
Options 1. Other sizes and specifications available upon request.
2. Skid mounted if required.
3. Various configurations can be built to customer requirement and according to
specific applications.

SRIENERGYVALVES DIVERTER MANIFOLD

PARTS LIST

DIVERTER MANIFOLD

102.26

53.00

07
02
06

40.88

01 04
PLAN

05 03

38.20

11.572

ELEVATION

1. Valve , 51/8” -5k –Manual Model “LAC ”

2. Valve , 31/8” -5k –Manual Model “LAC ”
3. Tee , 5 1/8” -5k FLG (2 way) x 3 1/8”-5k FLG (1 way)
4. Flan ges , 5 1/8 “-5k x 6” fig 1002 F emale
5. Fla nges , 5 1/8 “-5k x 6” fig 206 Male
6. Flange s , 3 1/8 “-5k x 3” fig 602 Male
7. Fla nges , 3 1/8 “-5k x 3” fig 602 F emale
8. R -44 Ring Joint G asket ( NS )
9. R -35 Ring Joint G asket (NS )
10. Stud(NS)
11. Nut(NS)

SRIENERGYVALVES DIVERTER MANIFOLD

 HYDRAULIC GATE VALVE
MODEL LAC (CIW FC TYPE)

SPECIFICATIONS

HYDRAULIC GATE VALVE

Size 1 13/16"to 7 1/16"
Pressure rating 5000 psi to 15000 psi
Construction Forged body and bonnet
Design features Built with manual override to close manually in the event of hydraulic pressure
shutdown.
Body has a Bottom preparation for installing tail rod and stem protector.
Tail rod acts as a means for balancing the pressure and as indicator(open or close).

SRIENERGYVALVES GATE VALVE, MODEL LAC (CIW FC TYPE) HYDRAULIC

 PARTS LIST

01. Handwheel 22. Bonnet

02. O-Ring 23. Grease Fitting
03. Adjusting Nut 24. Valve Check
04. O-Ring 25. Bonnet Gasket
05. Locking Screw 26. Stem
06. Cylinder Head Nut 27. Gate
07. Set Screw 28. Retainer Plate
08. Blind Cylinder Head 29. Seat
09. Cylinder Head Stud 30. Seal, Seat & Body Bushing
10. Cylinder 31. Body Bushing
11. Centering Pin 32. Stemp Pin
12. Set Screw 33. Lower Stem
13. Piston Lock Nut 34. Bonnet Stud
14. Piston 35. Auto Clave Plug
15. O-Ring 36. Name Plate
16. O-Ring 37. Pipe Plug
17. Gland 38. Body
18. Stem Packing 39. Body Extension
18A. Backup Ring 40. Grease Zert
19. Lower Cylinder Head 41. Stem Protector
20. Relief Valve 42. Bolt W/Nut
21. Bonnet Nut

DIMENSIONS
C

SEVPL

Working
Pressures 5000 10,000 15,000
(psi)
Size & Bore
2 1/16 2 9/16 3 1/8 4 1/16 7 1/16 1 13/16 2 1/16 2 9/16 3 1/16 4 1/16 1 13/16 2 1/16 2 9/16 3 1/16
(Inches)

A
14 5/8 16 5/8 18 5/8 21 5/8 28 18 1/4 20 1/2 22 1/2 24 3/8 26 3/8 18 19 21 23 9/16
(Inches)

B
14 1/2 15 15/16 17 1/4 19 3/4 25 7/8 14 1/4 14 1/2 15 15/16 17 1/4 19 3/4 14 1/4 14 1/2 15 1/2 20 5/8
(Inches)

C
35 3/8 37 7/8 40 3/8 44 7/8 58 3/16 35 3/8 35 3/8 37 7/8 41 3/4 48 7/8 35 3/8 35 3/8 42 1/2 50 1/8
(Inches)

D
14 14 18 18 22 14 14 14 18 22 14 14 14 18
(Inches)

SRIENERGYVALVES GATE VALVE, MODEL LAC (CIW FC TYPE) HYDRAULIC

 POSITIVE CHOKE
MODEL S-H2

SPECIFICATIONS

POSITIVE CHOKE

Positive choke has a fixed size orifice and is used primarily in

production application designed and manufactured to API
Specification 6A and ISO 10423
S-H2 positive choke has replaceable beans with a fixed orifice
diameter at 1/64’’ increments starting from 8/64” (1/8’’) to
128/64” (2’’)

Size 2 1/16" to 4 1/16"

Pressure rating 5000 psi to 15000 psi
Specification level PSL1 -PSL3
Working Temprature -50°F to 250 °F
Construction Forged body and bonnet
Design features Built to suit H2S service and
temperature up to 250 °F can be
supplied to elevated temperatures
and special trims

TRIM CHART

FOR S-H2 CHOKE POSITIVE

MATERIAL
TRIM
BODY BONNET SEAT or BEAN

AA Carbon Alloy Steel Carbon Alloy Steel Stainless Steel

BB Carbon Alloy Steel Carbon Alloy Steel Stainless Steel

CC Stainless Steel Stainless Steel Stainless Steel

DD
Carbon Alloy Steel Carbon Alloy Steel Stainless Steel
22 RC MAX. 22 RC MAX.

EE
Carbon Alloy Steel Carbon Alloy Steel Stainless Steel
22 RC MAX. 22 RC MAX.

FF Stainless Steel Stainless Steel Stainless Steel

SRIENERGYVALVES POSITIVE CHOKE MODEL S - H

 PARTS LIST

10

2 01. Body
02. Bonnet
03. Wing nut
04. Bean
9 05. Gasket, Seat
06. Liner
4
07. Bleeder plug
5 08. Hex bolt
6 09. O-Ring & Back
10. Retainer Ring
1

DIMENSIONS

FLANGE SIZE PRESSURE(PSI) A" B" C"

2 1/16" 5,000 8.00 6.87 13.25

2 9/16" / 3 1/8" 3,000 11.38 8.88 18.50

2 9/16" / 3 1/8" 5,000 11.38 8.88 18.50

D SEVPL
2 9/16" / 3 1/8" 10,000 11.75 10.38 18.75

4 1/16" 10,000 11.50 9.94 18.69

A
2 9/16" / 3 1/16" 15,000 11.75 10.38 19.00

4 1/16" 5,000 11.38 9.88 18.75

SRIENERGYVALVES POSITIVE CHOKE MODEL S - H

 SSV
SURFACE SAFETY VALVE

SEV’S (Sri Energy Valves) Surface Safety Valves are Designed and Manufactured to meet API 6A
Specifications; hydraulically actuated gate valve keeps open by Hydraulic Pressure Closed
automatically in the event loss of hydraulic pressure.
Pneumatic fail safe valve works with air pressure also closes automatically when loss of air pressure.
The SSV Units hydraulics can be tied to Emergency shutdown system by which remote activation is
Possible from Various Location Such as rig site and well testing areas.
Remote SSV’S can be skid mounted (as required) meeting the rules of DNV’S Lifting appliances with
certification.
The End Connection Such as Flanged, hammer Union and hub Clamps etc, can be supplied as per
customer request.
SSV’S can be applied to off Shore and land, Drill stem tests, well clean up and production well tests .
Faster Closing Enhances Safety, Remotely actuated Valves.
Fail Close Safety gate valve Function’s with metal to metal seal and proven design.
Skid mounted for easy handling with safety either by Crane or by forklift.
Different models, Sizes, Pressure and temperature ratings are available on request for various well
conditions and with required end connection

SRIENERGYVALVES SURFACE SAFETY VALVE

 PARTS LIST
01. Bucket protector 23. Relief valve
02. Bolt 24. NPT fitting inlet
03. Stem protector 25. Bolt
04. Body extension 26. Packing gland
05. Packing stem 27. O-ring
06. Lower stem 28. O-ring
07. Stem pin 29. Cylinder
08. Retainer plate 30. Operating stem
09. Body bushing 31. Piston
10. Gate 32. Wear ring
11. Seat 33. Back up ring
12. Seal-seat & body bushing 34. Transmission piece
13. Body 35. Flat washer
14. Bonnet gasket 36. Nut
15. Stud 37. Spring lifter
16. Nut 38. Wear ring
17. Bonnet 39. Housing actuator
18. Auto clave plug 40. Breather
19. Grease fitting 41. Cap actuator
20. Check valve 42. Allen bolt
21. Bottom head actuator 43. Spring
22. O-ring

SPECIFICATIONS

PARAMETERS DESIGN SPECIFICATIONS

Model 5K Model 10K Model 15K

Bore Size 2 1/16", 3 1/8", 3 1/16", 4 1/16"

Maximum Working Pressure 5000 psi 10000 psi 15000 psi
Test Pressure 7500 psi 15000 psi 22500 psi

Actuator Type Hydraulic & Pneumatic

Operating Temperature Ranges -50 to 350 (˚F)
Material class AA,DD, EE & FF
Product specifications PSL-1 TO PSL-3G
Performance requirements
PR1 to PR2
Service Conditions
H2S

SRIENERGYVALVES SURFACE SAFETY VALVE

 CHOKE & KILL MANIFOLD

SPECIFICATIONS

CHOKE & KILL MANIFOLD

The choke & kill manifold is used in a well control situation to reduce or stop (kill) the pressure from the well.
SRI Energy can custom design manifold to fit rig floor area co-ordinating with the customer.
Manifold can be supplied with the skids or with transport frames for on shore or for off shore, operational
pressure ranging from 5000 psi to 20,000 psi, designed and built with API Standards with customer specified
third party inspection such as ABS, DNV, LOYDS etc, can be fully assembled and FAT tested.
Pressure Rating 5,000 psi to 20,000 PSI
Working Temperature -50°F to 350 °F
Specification level PSL -1 to PSL-3
Material Class AA, BB, CC,DD, EE, FF
Performance Level PR1 –PR2

SRIENERGYVALVES CHOKE & KILL MANIFOLD

 API STANDARD PRODUCTS

TOP CONNECTOR CROSS OVER CONNECTOR

SEVPL SPACER SPOOL SEVPL 6A TYPE 6B, 6BX FLANGES SEVPL

RING JOINT GASKET STUDED CROSS & TEE TUBING HEAD ADAPTER

CASING SPOOL DRILLING SPOOL

BULL PLUG THREADED CONNECTORS

SRIENERGYVALVES API STANDARD PRODUCTS

a) FC Type / Slab gate
b) Split gate

a) Adjustable
b) Positive

a) Casing head
b) Casing spools
c) Tubing head
d) Tubing spools
e) Tubing head adapters
f) Tubing hanger
g) X-Mas tree ( Production & Work over )
CHECK VALVE
h) Tree caps
a) SR Type
SF. No. 115/4A Vadugapatti village, Illupur Taluk, Viralimalai - 621 316,
Pudukottai District, Tamil Nadu, INDIA.
Tel : +91 - 4339-221358, +1 - 281 - 8090958

Houston, Texas, USA

1- 281 - 573 - 8423(O), 1 - 281 - 693 - 7574(M)