PEN00555-01
MULTI-COLOR MONITOR QUICK REFERENCE SHEET
DASH 10
Normal display WARNING
This sheet is not a substitute for the Operation and Maintenance Man-
Displayed only when function is ual. Always read the Operation and Maintenance Manual thoroughly and
selected or display condition is met make sure that you understand the content before reading this sheet.
Wiper Swing lock Engine preheating or Service meter, Clock Auto-deceleration
ON: Continuous One-touch power max.
INT: Intermittent
Working mode
Air conditioner
Travel speed
Seat belt
Fuel gauge
Engine stop
ECO gauge
KDPF regeneration or
KDPF regeneration Hydraulic oil
disable temperature
gauge
Message
Fuel consumption
gauge
Engine coolant
temperature Guidance icon
gauge
Travel speed selector switch
Lo Mi Hi
Function switches
Auto-deceleration switch Window washer and
wiper operation switch
Buzzer cancel switch
Air conditioner control
switches
Working mode selector switch
P E L B (ATT/P ATT/E) Wiper switch
Off intermittent continuous
Switching the working
mode button, the screen
will be changed as below Working Mode
Power Mode
Economy Mode
Lifting Mode
BRAKER1 180 min
ATTACHMENT1 430 min Hydraulic oil flow settings for a breaker or a
ATTACHMENT1 430 min
crusher will be done at
"Attachment" in the "user menu".
(for details, see the Operation and Mainte-
nance Manual) (*1)
If the monitor gives a warning display, check the displayed location as soon as possible and carry out the necessary maintenance.
CAUTION The monitor display does not guarantee the condition of the machine. Do not rely only on the monitor display for maintenance and checks of the
machine; always carry out visual checks.
Guidance icon
Switching to Occurred error list
Back
SYMBOL TABLE video screen display
Action level
Switching clock Confirmation User menu
Displays the severity of abnormality having occurred in the machine. and service meter
Refer to the following table and take required remedy. Check error list by
pressing F5 and then call your Komatsu distributor. Move to next page Move to left item Move to next item
Move to previous Move to right item Move to previous
Severity Action level Remedy page item
High Stop the engine immediately, and then perform inspection Standard
Maintenance item replacement Working mode
and maintenance. interval
Setting of high-efficiency
Change engine oil 500h Power mode and powerful operation
Stop the work, move the machine to a safe place, stop the
engine, and then perform inspection and maintenance. Replace engine oil Setting of low-cost operation
500h Economy mode with less fuel consumption
filter
Stop the work and run the engine at medium speed with no Replace main fuel Setting of optimum work
load or stop it. 1000h Lifting mode equipment speed for the work
filter
Operation of the machine is allowed for though some functions Replace pre fuel Breaker mode with Setting of preset optimum flow
may be restricted. filter 500h attachment piping rate (see reverse page *1)
Low After finishing the work, perform inspection and maintenance. Setting of preset flow rate optimum
Replace hydraulic 1000h Attachment mode (Power)
oil filter for high-efficiency and powerful
(with attachment piping)
operation (see reverse page *1)
Replace hydraulic 500h
Caution (Warning) Setting of preset flow rate optimum
tank breather element Attachment mode (Economy)
Engine coolant temperature Abnormal drop in engine oil for operation with less fuel
Check damper case (with attachment piping)
overheated pressure 1000h consumption (see reverse page *1)
oil level, add oil
Hydraulic oil temperature Insufficient battery charge Change final drive
overheated case oil 2000h Indicator
Abnormal in general electric Change swing
Filled water separator with water 1000h There is unread
system machinery case oil Seat belt
message (Green)
Abnormal in hydraulic system Abnormal drop in engine oil Change oil in There is message
level 5000h Engine stop
hydraulic tank need to reply (Blue)
Abnormal in KDPF Abnormal drop in coolant level KCCV filter change 2000h Air conditioner KDPF regeneration
Soot sedimentation in KDPF Filled air cleaner with dust KDPF regeneration
KDPF filter cleaning 4500h Intermittent wiper disable
Abnormal in engine Abnormal in air conditioner Fuel doser cleaning 4500h Continuous wiper Auto-deceleration
Swing lock Travel Low speed
Maintenance Interval Remain
Engine Oil Change 500 h 0 h
Engine preheating Travel Mid speed
If or display appears
Engine
Engien Oil Filter Change 500 h 10 h
on the screen, the maintenance One-touch
Fuel Main Filter Change 1000 h 360 h
Remain Power max
Travel High speed
time for some item is close. Red
Fuel Pre Filter Change 500 h 360 h Time for maintenance
Press (F6) switch Hyd Oil Filter Change 1000 h 360 h
Yellow Maintenance time is close
