1 of 55 ISO EasySet Setting Tool Mechanical Tech Unit
DOCUMENT NUMBER CLASSIFICATION DOCUMENT LEVEL REVISION NUMBER ISSUE DATE PREPARED BY APPROVAL
GL-WLS-OEPS-L4-185 CONTROLLED L4 05 22 JULY 2020 JON HUMPHREY COMP TWIC
ISO EasySet
Weatherford’s ISO EasySet Setting Tool is an Alkaline battery-operated, timer-based
device that enables downhole tools to be set without the use of explosives. The ISO
EasySet displaces conventional gas-generating setting tools that rely on explosives as
a means of generating the required force. The ISO EasySet Tool eliminates the
hazards associated with the handling and storing of explosives.
ISO EasySet is run on slickline, electric line or coiled tubing and the operator can
select various timer settings depending on the depth at which the tools are to be
deployed. Once the time has elapsed the setting tool will begin to initiate. If e-line is
used, the setting tool can be activated from surface without the need to wait the
internal on timer. Pressure testing of the lubricator does not affect the timer. If the
tools are recovered into the lubricator, the timer is simply disabled by removing the
electronics module. The ISO EasySet Setting Tool can be easily converted between
slickline and e-line deployment.
Applications
• Setting Industry Standard Bridge Plugs, Packers and Gauge Hangers.
Features, Advantges, and Benefits
• The ISO EasySet contains no explosives, avoiding the issues and costs
commonly associated with the handling, storing, importing and exporting of such
materials.
• Options for both e-line and alkaline batteries eliminating the risk of the batteries
venting during jarring.
• Can be run on e-line, slickline, e-slickline or coil tubing.
• Prior to running a simple function test can be conducted on the surface to verify
functionally via a laptop or dedicated computer.
• No configuration required, only has one setting which fully stokes the length of
the ball screw.
• No hydraulics eliminating the associate problems such as oil contamination,
temperature effects and compressibility.
• Simple reset at surface to reduce time between runs.
• The tool provides confirmation of correct setting, either instantly with E-Line or
on surface with Slick-Line, ensuring operational efficiency.
• Unlike explosive or lithium tools, the ISO EasySet does not produce any noxious
gasses that redress personnel can be exposed to, enhancing a safer working
environment.
© 2019 – 2020 Weatherford International LTD All Rights Reserved Proprietary and Confidential. This document is copyrighted and contains valuable proprietary
and confidential information, whether patentable or patentable, of Weatherford. Recipients agree the document is loaned with confidential restrictions, and with
the understanding that neither it nor the information contained therein will be reproduced, used or disclosed in whole or in part for any purpose except as may be
specifically authorized in writing by Weatherford. This document shall be an Uncontrolled Copy when printed.
2 of 55 ISO EasySet Setting Tool Mechanical Tech Unit
DOCUMENT NUMBER CLASSIFICATION DOCUMENT LEVEL REVISION NUMBER ISSUE DATE PREPARED BY APPROVAL
GL-WLS-OEPS-L4-185 CONTROLLED L4 05 22 JULY 2020 JON HUMPHREY COMP TWIC
Specification Guide
2.125 in. 2.125 in. 2.75” 3.600 in.
Size
(54.00 mm) (54.00 mm) (69.85 mm) (91.44 mm)
1.740in. 1.740in. 2.303 in. 2.303 in.
Fish neck
(44.2mm) (44.2mm) (58.5 mm) (58.5 mm)
48in. 60 61.8 in. 48.9 in.
Length
(1,220 mm) (1,524 mm) (1,560 mm) (1,240 mm)
Thread Up 1.060" 10 TPI UN Pin OR 1-3/16 x 12 UN GO Box
2.000" 10 TPI stub 2.000" 10 TPI stub 2.500” 6 TPI reg 3.500" 6 TPI regular
Outer thread down acme pin acme pin acme pin acme pin
(GO connection) (GO connection) (#10 connection) (#20 connection)
0.688" 16 TPI UN 0.688" 16 TPI UN 2.000" 6 TPI regular
1.000” 8 TPI UN Box
Inner thread down Box Box acme pin
(#10 connection)
(GO connection) (GO connection) (#20 connection)
38 lb TBA 66 lb (e) 109 lb
Weight
(17 kg) 30 kg (49 kg)
Base Material AISI 4145
Elastomers Viton®
Class of service Standard
Maximum number of runs 1
15,000 psi
Pressure rating
(103.42 MPa)
32°F to 275°F
Temperature (a) (b)
(0°C to 135°C)
Maximum generated setting 40,000 lb 40,000 lb 50,000 lb 90,000 lb
force (177.92 kN) (177.92 kN) (222.41 kN) (400.34 kN)
30,000 lb 30,000 lb 38,000 lb 60,000 lb
Nominal operation setting force
(133.44 kN) (133.44 kN) (169.03 kN) (266.88 kN)
10 in. 16 in. 10 in. 10”
Maximum stroke (c)
(254 mm) (254 mm) (254 mm) (254 mm)
0.5” / minute 0.5” / minute 2” / minute 0.5” / minute
Setting Speed (d)
12.7 mm / minute 12.7 mm / minute 50.8 mm / minute 12.7 mm / minute
(1) Lower temperature should be discussed with Engineering.
(2) 275°F (135°C) for 6 hours. 250°F (121°C) for 8 hours.
350°F (175°C) for a maximum of 6 hours with externa l flask.
(3) Stoke length can be easily increased.
© 2019 – 2020 Weatherford International LTD All Rights Reserved Proprietary and Confidential. This document is copyrighted and contains valuable proprietary
and confidential information, whether patentable or patentable, of Weatherford. Recipients agree the document is loaned with confidential restrictions, and with
the understanding that neither it nor the information contained therein will be reproduced, used or disclosed in whole or in part for any purpose except as may be
specifically authorized in writing by Weatherford. This document shall be an Uncontrolled Copy when printed.
