Scribd
Upload
80 views1 page

Digital Tank Level Indicator DIT 10

The document describes a digital tank contents indicator for measuring fuel levels in tanks up to 4 meters high or wide. It uses a submersible probe and control unit with digital display to measure levels accurately without external power. It has a long battery life and is suitable for fuel, oil, diesel, and water applications.

Uploaded by

Bojan Kitanovski
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
80 views1 page

Digital Tank Level Indicator DIT 10

The document describes a digital tank contents indicator for measuring fuel levels in tanks up to 4 meters high or wide. It uses a submersible probe and control unit with digital display to measure levels accurately without external power. It has a long battery life and is suitable for fuel, oil, diesel, and water applications.

Uploaded by

Bojan Kitanovski
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Continuous Level

Digital tank contents indicator


DIT 10
■■ For fuel oil EL, L, diesel fuel, biodiesel 1
and water
■■ Universal application in tanks of up to
4 m in height or diameter
■■ No external supply voltage required
■■ Push-to-read function for extremely long
battery service life

Application Suitable for continuous level measurement in tanks containing fuel oil EL, L or diesel fuel and FAME
100 % as biodiesel (EN 14214). Specially suitable for underground tanks and basement tanks, also in
flood hazard areas. For filling levels from 900 mm to 4,000 mm.

Description The hydrostatic level indicator consists of a control unit with digital display and a submersible probe
with integrated pressure measuring cell. High measuring accuracy due to electronic sensor (pressure
measuring cell). Simple operation due to device setup via menus. No bearing charts required since all
standard tank shapes are stored. Watertight up to 10 m water column.

Technical Functions Submersible probe


specifications Push-to-read, selection of units, calculation Housing: Stainless steel 304 (1.4301)
of total volume Cable: PVC, 6 m with breather tube
Diaphragm: Stainless steel 316 L (1.4435)
Measuring range
Seals: FKM (Viton)
0/400 mbar
Spacer: POM, PE
Measuring accuracy
Supply voltage
±1.5 % FS
1 x lithium battery 3.6 V (included)
Operating temperature range Service life approx. 5 years
Medium: -5/+70 °C
Housing
Ambient: 0/45 °C
PA6, glass-loaded, blue,
Storage: -5/+70 °C
Ø 75 mm, wall mounting
Display
Degree of protection
4-digit, 12 mm high LCD 7-segment display
Control unit: IP 51 (EN 60529)
with additional symbols
Submersible probe: IP 68 (EN 60529)
Displayed values
Litres, m³, %, liquid level in mm

Scope of delivery
■■ Control unit with digital display
■■ 5 m connection cable to probe

(can be extended by up to 10 m)
■■ Moisture-proof junction box (IP 54)

■■ Submersible probe with 6 m submersible cable

■■ Screw connector kit G1 x G1½ x G2

■■ Mounting kit for withdrawal flange

(PG 9 gland)
■■ Wall mounting

DG: H, PG: 4 Part no. Price €


DIT 10 52150
Spare submersible
52153
probe (0/400 mbar)
Spare battery 68309

www.afriso.com 13

You might also like