Dialogic ® DSI Protocol Stacks

INAP Programmer's Manual

October 2017 U16SSS

www.dialogic.com
Copyright © 1998-2017 Dialogic Corporation. All Rights Reserved. You may not reproduce this document in whole or in part without
permission in writing from Dialogic Corporation at the address provided below.
All contents of this document are furnished for informational use only and are subject to change without notice and do not represent a
commitment on the part of Dialogic Corporation and its affiliates or subsidiaries ("Dialogic"). Reasonable effort is made to ensure the
accuracy of the information contained in the document. However, Dialogic does not warrant the accuracy of this information and cannot
accept responsibility for errors, inaccuracies or omissions that may be contained in this document.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH DIALOGIC® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED,
BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN
A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS
ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL
PROPERTY RIGHT OF A THIRD PARTY.
Dialogic products are not intended for use in certain safety-affecting situations. Please see http://www.dialogic.com/company/terms-of-
use.aspx for more details.
Due to differing national regulations and approval requirements, certain Dialogic products may be suitable for use only in specific
countries, and thus may not function properly in other countries. You are responsible for ensuring that your use of such products occurs
only in the countries where such use is suitable. For information on specific products, contact Dialogic Corporation at the a ddress
indicated below or on the web at www.dialogic.com.
It is possible that the use or implementation of any one of the concepts, applications, or ideas described in this document, in marketing
collateral produced by or on web pages maintained by Dialogic may infringe one or more patents or other intellectual property rights
owned by third parties. Dialogic does not provide any intellectual property licenses with the sale of Dialogic products other than a
license to use such product in accordance with intellectual property owned or validly licensed by Dialogic and no such licenses are
provided except pursuant to a signed agreement with Dialogic. More detailed information about such intellectual property is available
from Dialogic's legal department at 6700 Cote-de-Liesse Road, Suite 100, Borough of Saint-Laurent, Montreal, Quebec, Canada H4T
2B5. Dialogic encourages all users of its products to procure all necessary intellectual property licenses required to
implement any concepts or applications and does not condone or encourage any intellectual property infringement and
disclaims any responsibility related thereto. These intellectual property licenses may differ from country to country and it
is the responsibility of those who develop the concepts or applications to be aware of and comply with different national
license requirements.
Dialogic, Dialogic Pro, Dialogic Blue, Veraz, Brooktrout, Diva, BorderNet, PowerMedia, PowerVille, PowerNova, MSaaS, ControlSwitch, I-
Gate, Mobile Experience Matters, Network Fuel, Video is the New Voice, Making Innovation Thrive, Diastar, Cantata, TruFax, SwitchKit,
Eiconcard, NMS Communications, SIPcontrol, Exnet, EXS, Vision, inCloud9, NaturalAccess and Shiva, among others as well as related
logos, are either registered trademarks or trademarks of Dialogic Corporation and its affiliates or subsidiaries. Dialogic's trademarks
may be used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic's legal department at 6700
Cote-de-Liesse Road, Suite 100, Borough of Saint-Laurent, Montreal, Quebec, Canada H4T 2B5. Any authorized use of Dialogic's
trademarks will be subject to full respect of the trademark guidelines published by Dialogic from time to time and any use of Dialogic's
trademarks requires proper acknowledgement.
The names of actual companies and products mentioned herein are the trademarks of their respective owners.
This document discusses one or more open source products, systems and/or releases. Dialogic is not responsible for your decision to
use open source in connection with Dialogic products (including without limitation those referred to herein), nor is Dialogic responsible
for any present or future effects such usage might have, including without limitation effects on your products, your business, or your
intellectual property rights.

Publication Date: October 2017

Document Number: U16SSS, Issue 15

2
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Revision History
Issue Date Description
15 Oct 2017 CS1+ Protocol added.
Parameter ‘INPN_EventTypeBCSM’ [24] corrected to be INPN_EventTypeBCSM(0)
[192] in various protocol tables.
Parameter for BCSM event ‘AnalyzedInformation’ corrected; in various protocol
tables.
14 Oct 2016 Added parameter area to INAP_MSG_ERROR_IND message
Added error codes
Added INAPPN_riid parameter to message types table
Corrected ITU CS-1 InitialDP table
13 Apr 2016 Addition of Extended Dialog Ranges
Addition of new values for INAPPN_prov_rsn
Addition of INAPPN_dlg_idle_timeout parameter.
Addition of AIN services: ResourceClear, SendNotification and TerminationAttempt.
INAP timers Configuration is in seconds (manual correction).
Some ellipsis parameters moved to the end of the operation.
Module Configuration message uses format version 1
12 Jun 2008 Rebranding and updates.
CAMEL v4 and CAMEL v4 for IMS added.
11 Aug 2007 CAP v3 documentation revised.
Minor corrections and updates.
10 Dec 2005 Added new parameters (qos, user_information, report_cause)
Addition of a subset of AIN operations from GR-1299-CORE (AINGR).
Minor corrections and updates.
9 Jul 2003 Addition of all CAP V3 operations and selected AIN operations.
8 Jul 2003 Branding changed: references to System7 removed.
7 Jul 2001 Addition of remaining operations for ETSI CS-2.
6 Mar 2001 Addition of operations for ETSI CS-2 SCF-SRF interface.
5 May 2000 Extension of protocol support to provide access to operations and application contexts
in ITU CS-1 (Oct ‘95) and CAMEL (v1 and v2).
Enhanced support for the sending and receiving of operation extensions.
Addition of new parameter for close pre-arranged end handling.

4 May 1999 Completion of all ETSI CS-1 operations and application contexts included in ETS 300
374-1. Includes details of new operations and additional parameters required to
support these new operations. Addition of the procedure IN_version procedure to
provide API version information.
3 Feb 1999 Addition of seven more ETSI 300-374-1 operations.
2 Nov 1998 Minor Corrections.
Notes on use of “pre-arranged end” of INAP dialogues
1 Oct 1998 First Issue. INAP interface.

Note: The latest release issue of this guide can be found at:
http://www.dialogic.com/support/helpweb/signaling

3
Revision History

Contents
Revision History............................................................................................................ 3

1 Introduction ........................................................................................................ 6
1.1 Feature Overview ................................................................................................................... 6
1.2 Related Documentation ........................................................................................................... 7
1.3 Abbreviations ......................................................................................................................... 8

2 General Description ............................................................................................. 9

2.1 Module Overview .................................................................................................................... 9
2.2 INAP Functional Entity Addressing........................................................................................... 10
2.3 INAP Application Context Handling .......................................................................................... 11
2.4 Module Dimensions ............................................................................................................... 11
2.5 Module Requirements ............................................................................................................ 11

3 INAP Module User Interface .............................................................................. 12

3.1 Introduction ......................................................................................................................... 12
3.2 Dialog Primitive Types ........................................................................................................... 13
3.3 Service Component Primitives ................................................................................................ 14
3.4 INAP Dialogue Request Message ............................................................................................. 15
3.5 INAP Dialogue Indication Message .......................................................................................... 17
3.6 INAP Dialogue Primitive Parameters ........................................................................................ 19
3.7 INAP Service Request Message ............................................................................................... 24
3.8 INAP Service Indication Message ............................................................................................ 26
3.9 INAP Service Primitive Parameters .......................................................................................... 27

4 Functional API User Interface ........................................................................... 32

4.1 Introduction ......................................................................................................................... 32
4.2 API Function Specifications .................................................................................................... 33
4.3 API Function Parameter Specifications ..................................................................................... 38
4.4 INAP – API Message Sequence Charts ..................................................................................... 43
4.5 API Dialogue Parameters ....................................................................................................... 52

5 Non-Primitive Interface ..................................................................................... 56

5.1 INAP Configuration Request ................................................................................................... 57
5.2 INAP Network Context Configuration Request ........................................................................... 61
5.3 INAP Timer Configuration Request .......................................................................................... 63
5.4 INAP Functional Entity Configuration Request ........................................................................... 64
5.5 INAP Application Context Configuration Request ....................................................................... 66
5.6 Read Revision Request .......................................................................................................... 68
5.7 INAP Software Event Indication .............................................................................................. 69
5.8 INAP Maintenance Event Indication ......................................................................................... 71
5.9 INAP Management Event Indication......................................................................................... 72
5.10 INAP Trace Mask Request ...................................................................................................... 73
5.11 Trace Event Indication ........................................................................................................... 76
5.12 INAP Maintenance Mask Request ............................................................................................ 77
5.13 INAP Software Event Mask Request......................................................................................... 78

Appendix A. Tick Timer Message Format .................................................................... 79

A.1 Tick Timer Message Format.................................................................................................... 79

Appendix B. Supported INAP Application Contexts .................................................... 80

B.1 Overview ............................................................................................................................. 80
4
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.2 Supported INAP Application Contexts ...................................................................................... 81

B.3 Supported INAP Operations .................................................................................................... 85
B.4 Supported INAP Operation Parameters .................................................................................... 89
B.5 ETSI CS-1 Operation Definitions ............................................................................................. 91
B.6 ITU-T CS-1 Operation Definitions .......................................................................................... 106
B.7 CAMEL v1 Operation Definitions ............................................................................................ 121
B.8 CAMEL v2 Operation Definitions ............................................................................................ 125
B.9 CAMEL v3 Operation Definitions ............................................................................................ 137
B.10 CAMEL v4 Operation Definitions ............................................................................................ 164
B.11 CAMEL v4 for IMS Operation Definitions ................................................................................. 202
B.12 ETSI CS-2 Operation Definitions ........................................................................................... 206
B.13 CS1+ Operation Definitions .................................................................................................. 249
B.14 AIN Operation Definitions ..................................................................................................... 269
B.15 Operation Extensions........................................................................................................... 282
B.16 Supported INAP Parameter List ............................................................................................. 284
B.17 Supported INAP Operation Result .......................................................................................... 311
B.18 Supported INAP Errors......................................................................................................... 316
B.19 Supported INAP Error Parameters ......................................................................................... 318

Appendix C. Message Type Reference ...................................................................... 322

C.1 Message Type Reference ...................................................................................................... 322

Figures
Figure 1. INAP at an SCP .......................................................................................................... 9

5
1 Introduction

1 Introduction
The Dialogic® DSI Protocol stacks INAP module enables development of
Intelligent Network applications in the SS7 environment. The User application
is provided with simple access to the operations specified in the Intelligent
Network Application Protocol (INAP).

The module is of use to applications implementing any of the functions of the

following IN Functional Entities: Service Control Function (SCF), Service
Switching Function (SSF), Specialized Resource Function (SRF) or Call
Unrelated Service Function (CUSF).

The module is a software implementation of the Single Association Control

Function (SACF) specified in the Intelligent Network Application Protocol
(INAP) ([1] on page 7).

The INAP module consists in an event driven task using standard DSI
structured message types, which provides a control interface at the service
provider level. A suite of API functions is also supplied to provide a
convenient interface for the user application as well as coding and decoding
of IN operations.

The module uses the services provided by the underlying Transaction

Capabilities (TCAP) service for the transfer of operations between peer INAP
Functional Entities.

This Programmer's Manual is intended for users developing their own

applications that interface to and make use of the functionality provided by
the INAP module.

Both the INAP module and the suite of API functions are written using the ‘C’
programming language. They are fully portable and make no operating
system or compiler specific references.

This manual provides an overview of the API IN functions and the interface to
the INAP module. It includes details of all API function parameters and the
structure of messages used to interface to the INAP module.

1.1 Feature Overview

Key features of the INAP module include:
 Eases IN application development by providing simple access to
communication between IN functional entities.
 Functional Entity independent solution.
 Supports communication functions required at the SCF, SSF, SRF and
CUSF Functional Entities.
 Implements the Single Association Control Function (SACF) specified in
the ITU Q.1218 and ETSI ETS 300 374-1 specifications.
 INAP module provides service independent access to the SS7
environment.

6
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

 Procedural API provides a convenient means of accessing the INAP

module. Provides tailored suites of Application Service Elements (suites of
INAP operations) to support the required IN functions.
 The supported ASEs may be readily extended to support any network or
operator specific IN functions.
 Full user control of dialogues via message oriented or procedural (API)
interface.
 Support for application context negotiation.
 Support for ITU, ETSI and CAMEL protocol stacks.
 Support for a subset of the AIN protocol stack GR-1299-CORE (AINGR).
 Error handling for Class 1, 2, 3, and 4 operations.

1.2 Related Documentation

[1] ETS 300 374-1 - ETSI Intelligent Network CS1 Specification
[2] X.208 - Specification of Abstract Syntax Notation One (ASN.1)
[3] X.209 - Basic Encoding Rules for Abstract Syntax Notation One (ASN.1)
[4] Q.773 - SS7 Transaction Capabilities Formats and Encoding
[5] U06SSS – Dialogic® DSI Protocol Stacks - TCAP Programmer's Manual
[6] U10SSS – Dialogic® DSI Software Environment Programmer’s Manual
[7] X.680 - Specification of Abstract Syntax Notation One (ASN.1)
[8] X.690 - Basic Encoding Rules for Abstract Syntax Notation One (ASN.1)
[9] Q.1218 - ITU-T Interface Recommendation for Intelligent Networks CS-1
[10] TS 101 046 v5.6.0 – CAMEL Application Part specification v1
[11] TS 101 046 v6.3.0 - CAMEL Application Part specification v2
[12] TS 129 078 v4.6.0 – CAMEL Application Part specification v3
[13] 3GGP TS 29.078 v7.3.0 (2006-06) - CAMEL Application Part
Specification v.4
[14] 3GGP TS 29.278 v7.0.0 (2005-12) - CAMEL Application Part 4 IP
Multimedia Subsystems (IMS) v.4
[15] EN 301 140-1 – ETSI Intelligent Network CS2 Specification
[16] GR-1299-CORE – AIN Specification, issue 7
[17] Q.1228 - ITU-T Interface Recommendation for Intelligent Networks CS-
2

7
1 Introduction

1.3 Abbreviations
The following table provides a list of abbreviations used in this manual.

Abbreviation Description
AIN Advanced Intelligent Network
ANSI American National Standards Institute
APDU Application Protocol Data Unit
ASE Application Service Element
ASN.1 Abstract Syntax Notation One
CAMEL Customized Application for Mobile Network Enhanced Logic
CAP CAMEL Application Part
CCITT The International Telegraph & Telephone Consultative Committee
CS-1 Capability Set One
CS-2 Capability Set Two
CUSF Call Unrelated Service Function
FE Functional Entity
FEAM Functional Entity Access Manager
INAP Intelligent Network Application Protocol
ITU-T International Telecommunication Union (formerly CCITT)
MACF Multiple Association Control Function
MTP Message Transfer Part
SACF Single Association Control Function
SCCP Signaling Connection Control Part
SCF Service Control Function
SCP Service Control Point
SRF Specialized Resource Function
SSF Service Switching Function
TCAP Transaction Capabilities Application Part

8
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

2 General Description

2.1 Module Overview

The module provides an implementation of the Single Association Control
Function (SACF) block of an IN Functional Entity. The figure below shows the
various components at a SCP functional entity but the module itself is FE
independent. It may provide services to applications implementing the
functions of the SCF, SSF and SRF Functional Entities. It may also support
services to multiple FEs located at the same node. The ASEs can be
implemented using the INAP API suite. Other modules in the Dialogic® SS7
Protocol stack can be used to implement the SCCP, TCAP and MTP layers.

Figure 1. INAP at an SCP

SCP

SCF

ASE(s)
SACF [INAP API suite]
[INAP Module]
TCAP

SCCP

MTP1-3

SS7 link SS7 link

The module is event driven. It has a single input queue into which messages
from other modules (TCAP, INAP-User, management etc.) are written. The
module processes each message in turn until the input queue is empty, in
which case it will do nothing until the next event is received. Output from the
module is directed depending on the type of event to the TCAP module, the
INAP User module, the Management module or the Maintenance module.
9
2 General Description

The Intelligent Network Application Protocol (INAP) is specified in terms of

operations that are "invoked" at the serving FE by the requesting FE. See [9]
on page 7. These operations are invoked within the context of a "dialogue"
between the two FEs.
The INAP module provides the user with a primitive interface for INAP
dialogue control and for INAP service requests. The service request primitives
contain INAP operations coded as TCAP components ([4] on page 7) for
transmission via INAP dialogues.
The INAP module is supplied with an API function library containing a
procedural interface for the INAP module. This consists of a suite of API
functions for dialogue control and IN operation handling.
The API suite includes functions for the encoding and recovery of IN
operations and associated parameters. The operations are coded as TCAP
components using the Basic Encoding Rules of the Abstract Syntax Notation
1, see [3] on page 7. This is the format required by the INAP module.
Certain other parameters are also built into the INAP service request message
by the coding function.
If the user already has access to the ASN.1 encoded version of the
component the INAP module may be accessed directly via the primitive
interface.
The API functions suite may be used with different variants of the INAP
protocol. The required protocol handling is specified via internal coding tables.
The user indicates the required protocol at run time. The INAP module is
protocol independent. This approach allows new variants to be made available
in minimum time.

2.2 INAP Functional Entity Addressing

When opening a dialogue with a remote FE the User Application must provide
the SCCP address of the local and remote FEs in the SS7 network.
The User Application may provide the full SCCP address explicitly in each
dialogue message or alternatively, the INAP module provides a number of
Functional Entity records which once configured allow the User Application to
address Functional Entities using a locally defined reference code. This
feature also permits the INAP module to support more than one local
Functional Entity. For example an SCF and an SRF may be supported on the
same SS7 stack. The FE record for each local FE should be configured with
the module id of the user application implementing the procedures of that FE.

10
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

2.3 INAP Application Context Handling

ITU-T and ETSI INAP specifications include the use of Application Context to
identify the "context" of a particular dialogue between two IN Functional
Entities. Application Context negotiation is required when a dialogue is
established between two IN Functional Entities. If the FE receiving the
dialogue request cannot support the requested context the dialogue is
aborted.
The INAP module is able to perform application context negotiation once the
supported contexts are configured. This can be done automatically using the
API interface. The API user handles Application Contexts using defined
interface codes.
Alternatively the INAP module may be configured to transparently pass raw
Application Context data to the User permitting the User Application to
perform context negotiation if required. This transparent Application Context
handling option can also be used to support interworking with some
proprietary INAP implementations that do not make use of Application
Contexts.

2.4 Module Dimensions

Internally there are a number of data structures used by the module.
The maximum dimensions of these structures are determined by compile time
constants. The constants of importance to the user are:
 The maximum number of IN Functional Entities supported by the module
(32 for all assemblies).
 The maximum number of Application Contexts supported by the module
(32 for all assemblies).
 The maximum number of simultaneous dialogues supported by the
module.
 The maximum number of simultaneous invocations supported by the
module.
Host based (Linux, DSI-G51 Signaling
Windows®, Solaris) controller
Maximum 65535 or 1048576 65535
number of (depending on OS and
dialogues run-time license)
supported
Maximum 65535 or 1048576 65535
number of (depending on OS and
invokes run-time license)
supported

2.5 Module Requirements

The module requires a periodic timer tick notification to be issued via the
input queue. Typically this is required every tenth of a second. This can either
be generated by a timer module or using the services of the selected
operating system.

11
3 INAP Module User Interface

3 INAP Module User Interface

3.1 Introduction
The INAP module is event driven.
The INAP module - User interface is message based and uses the following
message types:

Message Type Value Usage

INAP-SERVICE-REQ 0xc7f0 Used to invoke an operation at a remote Functional Entity.
Also to respond to operation invocation requests from
remote Functional Entities.
INAP-SERVICE-IND 0x87f1 Used to receive the results or errors arising from
operations invoked at remote Functional Entities. Also to
receive operation invocation requests from remote
Functional Entities.
INAP-DIALOGUE-REQ 0xc7f2 Used to issue dialogue commands to the INAP module.
INAP-DIALOGUE-IND 0x87f3 Used to receive dialogue events from the INAP module.

User dialogue commands are passed by sending command primitives in the

dialogue request messages outlined above.
User operations are sent to the network using the service request messages
outlined above. The required operation and associated parameters are
supplied coded as a TCAP component ([4] on page 7) following the basic
ASN.1 encoding rules ([3] on page 7). It is recommended that the user make
use of the suite of API functions for the coding and decoding of INAP
operations, see Chapter 4: Functional API User Interface on page 32.
The message must be contained in a single buffer allocated by the sending
module. The suite of API functions includes functions for the allocation and
transmission of these message buffers.
Each INAP primitive includes a number of parameters. These parameters are
conveyed in the parameter area of the message buffer.

12
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

3.2 Dialog Primitive Types

Dialogue handling primitives provide the mechanism by which dialogues are
established and maintained with remote Functional Entities.
Dialogue primitives are sent by the INAP User in an INAP-DIALOGUE-REQ
message. These convey a dialogue request or response:

Primitive Value Usage

INAP-OPEN-REQ 0x1 Used to open a dialogue. The INAP module assigns
resources for the dialogue and awaits any INAP operations
the user wishes to open the dialogue with.
INAP-CLOSE-REQ 0x2 Basic End: Used to indicate that any operations supplied
should now be transmitted to the remote FE. The dialogue is
then terminated.
Pre Arranged End: Used to indicate that the dialogue may be
terminated locally when any active invocations have
completed. Any pending components sent to the INAP
module will be discarded. The INAP module will issue a
Close Indication when the dialogue is terminated.

INAP-DELIMIT-REQ 0x3 Used to indicate that any components supplied should now
be transmitted to the remote FE. The dialogue remains open.
INAP-U-ABORT-REQ 0x4 Used to indicate that the user wishes to abort this dialogue.
Any outstanding components are discarded.
INAP-OPEN-RSP 0x81 Used to accept or reject a dialogue request from a remote
FE.

Under some network configurations, it may be desirable to change the local

and remote addresses that INAP uses for a particular dialogue after the Open
has been received. The INAP module allows the user to specify a new set of
origination and destination addresses within the Open-Response (or U_Abort
if appropriate). These addresses will be used for the remainder of the
dialogue. The value of INAPPN_dest_address will become the new remote
address and the INAPPN_orig_address will become the new local address
which will be used in messages sent to TCAP.
The current TCAP specifications only allow for the local address of the
responding end of a dialogue to be changed; therefore, end-to-end support
for changing additional addresses may depend on functionality offered at
other nodes.
Where the INAP module started a dialogue, it accepts new local and remote
addresses and uses them for the rest of the dialogue. This means that the
INAP module supports the functionality to act at both ends of a dialogue
where the addresses have changed.

13
3 INAP Module User Interface

Dialogue primitives sent by the INAP module in an INAP-DIALOGUE-IND

message. These convey a dialogue indication or confirmation:

Primitive Value Usage

INAP-OPEN-IND 0x1 Used to indicate a dialogue request from a remote FE. The
user may subsequently receive service indication messages
bearing components.
INAP-CLOSE-IND 0x2 Used to indicate that all the components received have
been issued to the user. The dialogue is terminated.
INAP-DELIMITER-IND 0x3 Used to indicate that all the components received have
been sent to the user. The dialogue remains open.
INAP-OPEN-CNF 0x81 Used to indicate that the remote FE has accepted the user’s
dialogue request.
INAP-U-ABORT-IND 0x4 Used to indicate that the remote user has aborted the
dialogue. Any outstanding components have been
discarded.
INAP-P-ABORT-IND 0x5 Used to indicate that the dialogue has been aborted
because of a network error. Any outstanding components
have been discarded.
INAP-NOTICE-IND 0x6 Used to indicate that an abnormal component was detected.

3.3 Service Component Primitives

Service Component Request primitives convey coded INAP operations to the
INAP module. The primitive type indicates the nature of the component.

Primitive Value Usage

INAP-INVOKE-REQ 0x1 Used by the user application to request an operation
invocation.
INAP-RESULT-REQ 0x2 Used by the user application to provide the successful result
of an operation invocation.
INAP-ERROR-REQ 0x3 Used by the user application to provide the unsuccessful
result of an operation invocation.
INAP-REJECT-REQ 0x4 Used by an API decode function to indicate a "provider"
problem. This occurs if the decode function is unable to
decode the received component.

Service Component Indication primitives convey coded INAP operations to the

user. The primitive type indicates the nature of the component.

Primitive Value Usage

INAP-INVOKE-IND 0x1 Used by the INAP module to convey an operation invocation
to the user application.
INAP-RESULT-IND 0x2 Used by the INAP module to convey the successful result of
an operation previously invoked by the user.
INAP-ERROR-IND 0x3 Used by the INAP module to convey the unsuccessful result
of an operation previously invoked by the user.

14
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

3.4 INAP Dialogue Request Message

Synopsis
Message sent from the User to the INAP module containing a dialogue
request primitive.

Message Format
Message Header
FIELD NAME MEANING
type INAP_MSG_DLG_REQ (0xc7f2)
id dialogue_ID
src Sending module_id
dst INAP_MODULE_ID
rsp_req 0
hclass 0
status 0
err_info 0
len Number of bytes of user data
H

Parameter Area
Offset Size Name
0 1 Dialogue primitive type octet.
1 len - 2 Parameters in Name-Length-Data format.
len - 1 1 Set to zero indicating end of message.

Description
This message is used by the User to send dialogue primitives to the INAP
module. All dialogue primitives contain a dialogue ID which is encoded in the
message header. It does not form part of the parameter area. It must be
provided by the User with the INAP-OPEN-REQ primitive and used in the
message header of all subsequent dialogue primitives associated with that
dialogue. Operation invocations, results and errors are also associated with a
particular dialogue using this dialogue ID.
See Section 3.2 Dialog Primitive Types on page 13 for details of primitive
usage.

15
3 INAP Module User Interface

Parameter Area Contents

The following table lists the parameters associated with each dialogue request
primitive.

INAP Primitive
Parameter OPEN- CLOSE– DELIMITER- U-ABORT- OPEN-
REQ REQ REQ REQ RSP

Destination A O
address
Originating B O
address
Destination A
reference
Originating B
reference
Result M
Refuse reason O
Release method M
User reason M
Application O O O O
context name
Application C O
context index
User Information O O O
QoS O O O O O
NC O
Idle Timeout O O O
DID O O O O O
RIID O O O

Key

Symbol Description
M Mandatory The message will be discarded if the corresponding parameter is
omitted
O Optional The parameter is not essential
A Exclusive OR One of the parameters marked A must be included.
B Exclusive OR One of the parameters marked B must be included.
C Conditional The parameter marked C must be included if Application Context
negotiation is enabled i.e., if the INAP_MSG_CNF_AC message
has been issued at least once.

16
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

3.5 INAP Dialogue Indication Message

Synopsis
Dialogue event indication message sent from the INAP module to the user.

Message Format
Message Header
Field Name Meaning
type INAP_MSG_DLG_IND (0x87f3)
id Dialogue_ID
src INAP_MODULE_ID
dst User module_id
rsp_req 0
hclass 0
status 0
err_info 0
len Number of bytes of user data

Parameter Area
Offset Size Name
0 1 Dialogue primitive type octet.
1 len - 2 Parameters in Name-Length-Data format.
len – 1 1 Set to zero indicating end of message.

Description
This message is used by the INAP module to indicate dialogue events to the
User application.
All protocol messages must contain the dialogue ID of the dialogue to which
they refer. This is encoded in the message header. The INAP module assigns
the dialogue id for an incoming dialogue request (OPEN IND primitive).
See Section 3.2 Dialog Primitive Types on page 13 for details of dialogue
primitive usage.

17
3 INAP Module User Interface

The following table lists the parameters associated with each dialogue
indication primitive:

INAP Primitive

Parameter OPEN– CLOSE– DELIMITER- U-ABORT- P-ABORT- OPEN- NOTICE-

IND IND IND IND IND CNF IND

Destination
A O
address

Originating
B O
address

Destination
A
reference

Originating
B
reference

Result M

Refuse reason O

User reason M

Provider reason M

Application
O O O O O
context name

Application
C O
context index

Source M

Problem
M
diagnostic

Release confirm O

Report Cause O

User Information O O O O

NC O

DID O O O O O O O

Key

Symbol Description
M Mandatory The parameter will always be included in the message
O Optional The parameter may or may not be included in the message
depending on the circumstances in which the message is sent.
A Exclusive OR One of the parameters marked A must be included.
B Exclusive OR One of the parameters marked B must be included.
C Conditional The parameter marked C must be included if Application Context
negotiation is enabled i.e., if the INAP_MSG_CNF_AC message
has been issued at least once.

18
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

3.6 INAP Dialogue Primitive Parameters

The following parameter names are defined for use in dialogue primitive
messages:

Parameter Mnemonic Value (dec) Value (hex)

Destination address INAPPN_dest_address 1 0x01

Originating address INAPPN_orig_address 3 0x03

Result INAPPN_result 5 0x05

Refuse reason INAPPN_refuse_rsn 6 0x06

Release method INAPPN_release_method 7 0x07

User reason INAPPN_user_rsn 8 0x08

Provider reason INAPPN_prov_rsn 9 0x09

User Information INAPPN_user_info 10 0x0a

Application context name INAPPN_applic_context 11 0x0b

Source INAPPN_source 12 0x0c

Problem diagnostic INAPPN_prob_diag 13 0x0d

Destination FE code INAPPN_dest_FE 14 0x0e

Originating FE code INAPPN_orig_FE 15 0x0f

Application context index INAPPN_ac_reference 27 0x1b

Release confirm INAPPN_release_confirm 28 0x1c

QoS INAPPN_qos 29 0x1d

Report Cause INAPPN_report_cause 30 0x1e

Network Context INAPPN_nc 31 0x1f

Idle Timeout INAPPN_dlg_idle_timeout 32 0x20

Dialog ID (DID) INAPPN_did 33 0x21

RIID INAPPN_riid 34 0x22

The coding for each parameter type is given in the following tables:

Parameter name INAPPN_dest_address

Parameter length Variable, in the range 2 to 18
Parameter data SCCP address of the FE with which the dialogue is required.
Destination address parameter encoded in the format expected by the
network layer (e.g. when using SCCP, in accordance with Q.713 definition
of “Called party address”, starting with the address indicator and
containing, optionally, signaling point code, subsystem number and global
title).

19
3 INAP Module User Interface

Parameter name INAPPN_dest_FE

Parameter length Fixed, set to two octets.
Parameter data User defined reference code for the destination Functional Entity for this
dialogue. The User must previously have issued a Functional Entity
configuration request message for this FE. First octet is least significant
part. See Section 5.4 INAP Functional Entity Configuration Request on
page 64.

Parameter name INAPPN_orig_address

Parameter length Variable, in the range 2 to 18
Parameter data SCCP address of the FE requesting the dialogue.
Origination address parameter encoded in the format expected by the
network layer (e.g. when using SCCP, in accordance with Q.713 definition
of “Called party address”, starting with the address indicator and
containing, optionally, signaling point code and global title).

Parameter name INAPPN_orig_FE

Parameter length Fixed, set to two octets.
Parameter data User defined code for the originating Functional Entity for this dialogue.
The User must previously have issued a Functional Entity configuration
request message for this FE. First octet is least significant part. See
Section 5.4 INAP Functional Entity Configuration Request on page 64.

Parameter name INAPPN_result

Parameter length Fixed, set to one octet
Parameter data Indicates whether the remote FE accepts the dialogue request from the
user or not.
 0 – dialogue accepted
 1 – dialogue refused

Parameter name INAPPN_refuse_rsn

Parameter length Fixed, set to one octet
Parameter data When a remote FE refuses a dialogue request from the user a reason may
be provided.
Single octet coded as follows:
 0 - no reason given
 3 – application context not supported
 4 – potential version incompatibility

Parameter name INAPPN_release_confirm

Parameter length Fixed, set to one octet

20
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter data Allows the user to distinguish between a normal “basic” or “pre-arranged”
termination of a dialogue. If this parameter is not present, then a normal
release should be assumed.
 0 – normal release indication. The dialogue has been closed by the
remote system.
 1 – release confirm indication. The indication is generated to confirm
that the dialogue has been closed using a pre-arranged end. All
operations have been completed or have timed-out.

Parameter name INAPPN_release_method

Parameter length Fixed, set to one octet
Parameter data Allows the user to select “basic” or “pre-arranged” termination of a
dialogue.
 0 – normal release. The INAP module issues a dialogue termination
message to the remote system. May be used to transfer components to
the remote system. User application dialogue resources may be
released immediately.
 1 – prearranged end. Used where the IN specifications allow the
dialogue to be terminated locally without sending a dialogue
termination message to the remote system. If the INAP module is
awaiting responses (errors or results) for any active Class 1, 2 or 3
operation invocations, the INAP module will maintain the dialogue until
the internal operation timers have expired or the responses received.
Once all the operations have completed the INAP module will issue a
Close Indication primitive. User application dialogue resources may
then be released.

Parameter name INAPPN_user_info

Parameter length Variable (subject to satisfying message length limits).
Parameter data User information encoded as an X.208 EXTERNAL, commencing with the
EXTERNAL tag.
This formatting is not required when the User Information is carried in a
User Abort primitive. Any format may be used in this case.

Parameter name INAPPN_user_rsn

Parameter length Fixed, set to one octet
Parameter data Allows the user to provide an abort cause when aborting a dialogue.
Single octet coded as follows:
 0 - User specific reason
 6 - Application Context not supported

Parameter name INAPPN_prov_rsn

Parameter length Fixed, set to one octet

21
3 INAP Module User Interface

Parameter data Provides the user with an abort cause when the network aborts a dialogue.
 0 – provider malfunction
 1 – supporting dialogue/transaction released
 2 – resource limitation
 3 – maintenance activity
 4 – version incompatibility
 5 – abnormal INAP dialogue
 6 – invalid PDU
 7 - idle timout

Parameter name INAPPN_source

Parameter length Fixed, set to one octet
Parameter data Used to indicate the source of the abort in a provider abort primitive.
 0 – INAP problem
 1 - TC problem
 2 – network service problem

Parameter name INAPPN_applic_context

Parameter length Variable up to 32.
Parameter data This parameter is only used when the module has been configured for
"transparent AC operation" using the module configuration message.
The Application context as received or transmitted with this dialogue. May
be used to supply an alternative context when used with the U-ABORT
primitive.
Encoded as specified in Q.773 commencing with the Object Identifier
Name tag.

Parameter name INAPPN_ac_reference

Parameter length Variable, in the range 1 to 2
Parameter data The index specifying the Application context for use with this dialogue. The
module must previously have been configured with supported contexts and
associated references using the Configure AC message. If 2 octets used,
first octet is least significant part. See Section 5.5 INAP Application
Context Configuration Request on page 66.
May be used to supply an alternative context when used with the U-
ABORT primitive.

Parameter name INAPPN_prob_diag

Parameter length Fixed, set to one octet
Parameter data Used to indicate unexpected events that are not related to an active
operation invocation.
 0 – abnormal event detected by peer
 1 – response rejected by peer
 2 – abnormal event received from peer
 3 – abnormal network report cause

22
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter name INAPPN_report_cause

Parameter length Fixed, set to 1
Parameter data Values as defined in Q.713 Return cause

Parameter name INAPPN_qos

Parameter length Fixed, set to 1
Parameter data The octet is an indicator octet. The coding is as follows:
 bit 0 - Set to 1 if the Return Option is selected.
 bit 1 - Set to 1 if Sequence Control is required.
All other bits are reserved for future use and must be set to zero.

Parameter name INAPPN_nc

Parameter length Variable, in the range 1 to 2 (typically 1)
Parameter data Network Context identifier.
If the default NC is being used then this parameter is optional. If present, it
should have a value of 0. For other Network Contexts it should match the
value defined in the relevant INP_MSG_NC_CONFIG message.

Parameter name INAPPN_did

Parameter length Fixed, set to 4
Parameter data Dialog ID (32 bit)
Defines the Dialog ID. Only used when the INAPF_EXT_DID option is
enabled. If the option is enabled, the parameter must be defined for all
Dialog and Service messages to the module. Similarly, the parameter will
be defined in all Dialog and Service messages sent from the module to the
INAP User. The parameter must always be the first parameter in the
message parameter area after the primitive type octet. If the parameter is
defined, the 16 least significant bits of the Dialog ID value must also be
defined as the message ID.

Parameter name INAPPN_riid

Parameter length Variable, in the range 1 to 2
Parameter data Routing Indicator ID
This is a value set by the INAP User that passes down the DSI stack to the
SCCP module. If the SCCP module has GTTs configured that uses RIID
value, it is used to select those GTTs to route the outgoing request (see
SCCP Programmer’s Manual).

Parameter name INAPPN_dlg_idle_timeout

Parameter length Variable, in the range 1 to 2.
Parameter data Dialog Idle Timeout in seconds.
If 2 octets used, first octet is most significant part. Sets a Dialog Idle
Timeout in the TCAP module for the next network message sent for the
dialog (so long as the message does not terminate the dialog). The action
taken when a timeout expires is determined by TCAP (see the DSI TCAP
Programmer’s Manual).

23
3 INAP Module User Interface

3.7 INAP Service Request Message

Synopsis
Protocol message sent from the User to the INAP module containing a single
INAP operation invocation, result or error.

Message Format
Message Header
Field Name Meaning
type INAP_MSG_SRV_REQ (0xc7f0)
id Dialogue_ID
src Sending module_id
dst INAP_TASK_ID
rsp_req 0
hclass 0
status 0
err_info 0
len Number of bytes of user data

Parameter Area
Offset Size Name
0 1 Component Type octet.
1 len – 2 Parameters in Name-Length-Data format.
len – 1 1 Set to zero indicating end of message.

Description
This message allows the user to send INAP operation invoke, result and error
components to a remote Functional Entity via an open dialogue. It is also
used to issue problem codes relating to received components.
The User's components are formatted as a TCAP component following the
basic ASN.1 encoding rules.
All service request messages must contain the dialogue ID of the dialogue to
which they belong. This is encoded in the message header and does not form
part of the parameter area.

24
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

The following parameters are defined for use in service request messages:

Component Type

Parameter INVOKE- RESULT- ERROR- REJECT-

REQ REQ REQ REQ

Invoke ID M M M M

Linked ID O

Component M M M

Op code M

Parent Ind O

Class M

Timeout M

Problem code M

Quality Of Service (QoS) O

Dialog ID (DID) O O O O

Key

Symbol Description
M Mandatory The message will be discarded if the corresponding parameter is
omitted
O Optional The parameter is not essential

25
3 INAP Module User Interface

3.8 INAP Service Indication Message

Synopsis
Protocol message sent from the INAP module to the user containing a
received operation invoke, result or error component.

Message Format
Message Header
Field Name Meaning
type INAP_MSG_SRV_IND (0x87f1)
id Dialogue_ID
src INAP_TASK_ID
dst User module_id
rsp_req 0
hclass 0
status 0
err_info 0
len Number of bytes of user data

Parameter Area
Offset Size Name
0 1 Component Type octet.
1 Len - 2 Parameters in Name-Length-Data format.
len – 1 1 Set to zero indicating end of message.

Description
The INAP module uses this message to send received INAP operation invoke,
result and error components to the User.
The received components are formatted as a TCAP component following the
basic ASN.1 encoding rules.
All service indication messages must contain the dialogue ID of the dialogue
to which they belong. This is encoded in the message header and does not
form part of the parameter area.
The following parameters are defined for use in service indication messages:

Component Type

Parameter INVOKE-IND RESULT-IND ERROR-IND

Application context index C

Component M M A

Invoke ID M M M

26
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Component Type

Parameter INVOKE-IND RESULT-IND ERROR-IND

Linked ID O

Linked Op code O M M

Provider Error A

Dialog ID (DID) O O O

Key

Symbol Description
M Mandatory The parameter will always be included in the message.
O Optional The parameter may or may not be included in the message
depending on the circumstances in which the message is sent.
C Conditional The parameter will be included in the message if Application
Context negotiation is enabled, i.e. at least one
INAP_MSG_CNF_AC message has been issued.
A Exclusive OR One of the parameters marked A will always be included in the
message.

3.9 INAP Service Primitive Parameters

The following parameter names are defined for use in service primitive
messages:

Parameter Mnemonic Value (dec) Value (hex)

Invoke ID INAPPN_invoke_id 16 0x10
Linked ID INAPPN_linked_id 17 0x11
Component INAPPN_component 18 0x12
Class INAPPN_class 19 0x13
Timeout INAPPN_timeout 20 0x14
Op code INAPPN_op_code 21 0x15
Linked Op code INAPPN_linked_op_code 22 0x16
Problem code INAPPN_problem_code 23 0x17
Parent Ind INAPPN_parent_ind 24 0x18
Provider Error INAPPN_provider_error 25 0x19
MTP message priority INAPPN_priority 26 0x1a
Application context index INAPPN_ac_reference 27 0x1b
QoS INAPPN_qos 29 0x1d
Dialog ID (DID) INAPPN_did 33 0x21

27
3 INAP Module User Interface

Parameter name INAPPN_ac_reference

Parameter length Variable, in the range 1 to 2.
Parameter data The index specifying the Application Context of the dialogue on which
the component was received.
Supplied with invoke components to permit the decoded operation to be
validated against the context. If 2 octets used, first octet is least
significant part.
The module must previously have been configured with supported
contexts and associated references using the Application Context
configuration message. See Section 5.5 INAP Application Context
Configuration Request on page 66.

Parameter name INAPPN_invoke_id

Parameter length Fixed, set to 1.
Parameter data An id associated with every operation invocation. Assigned by the
invoking user.

Parameter name INAPPN_linked_id

Parameter length Fixed, set to 1.
Parameter data The invoke id of the parent operation invocation.
This parameter is only included in linked (child) operation invocations.

Parameter name INAPPN_component

Parameter length Variable, 1 to 255.
Parameter data The invoke, result or error component coded in accordance with Q.773
using the ASN.1 Basic Encoding Rules. Starting with the Component
type tag.

Parameter name INAPPN_class

Parameter length Fixed set to 1.
Parameter data The class of the INAP operation.
 1 - Operation has Results and Errors
 2 - Operation has Errors only
 3 - Operation has Results only
 4 - Operation has no Results or Errors
Where the INAP Operation code and decode functions are used, this
parameter is supplied automatically

Parameter name INAPPN_timeout

Parameter length Fixed set to 2.
Parameter data The TCAP timeout of the INAP operation.
Specified on a per operation basis in the INAP specifications. Time in
seconds.
Where the INAP Operation code and decode functions are used, this
parameter is supplied by using the API functions.

28
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter name INAPPN_op_code

Parameter length Variable, in the range 1 to 2.
Parameter data The INAP specified Operation Code.
Supplied by the User in Service Invoke Request messages. The INAP
module does not examine the contents, storing it for use in Service
Indication messages relating to this invocation.
Where the INAP API code and decode functions are used, this
parameter is supplied automatically.

Parameter name INAPPN_did

Parameter length Fixed, set to 4
Parameter data Dialog ID (32 bit)
See definition is Section 3.6.

Parameter name INAPPN_linked_op_code

Parameter length Variable, in the range 1 to 2.
Parameter data The INAP specified Operation Code.
Supplied by the INAP module in Service Invoke Indications where the
operation being invoked is a linked operation. In this case the operation
code indicates the Parent operation of the linked operation.
Supplied by the INAP module in Service Result & Error indications to
indicate the operation to which the result or error refers.
Where the INAP API code and decode functions are used, this
parameter is handled automatically.

Parameter name INAPPN_problem_code

Parameter length Fixed set to 1.
Parameter data Used by the User application to indicate a problem with a received
component to the INAP module. The value of this parameter is a defined
interface code. It does not correlate exactly with the TCAP reject
component problem code.
Where a INAP API decode function is used, this parameter is placed in
the reject component automatically.
 1: Mistyped Parameter - The User application was unable to decode
the received component.
 2: Unrecognized OP - The User application has decoded an
operation that is not supported.
 3: Unrecognized Error - The User application has decoded an error
that is not supported or not applicable to the operation invoked.

Parameter name INAPPN_parent_ind

Parameter length Fixed set to 1.

29
3 INAP Module User Interface

Parameter data Used by the User application to indicate to the INAP module that the
operation being invoked has defined linked operations. This allows the
INAP module to reject inappropriate received linked operation
invocations.
 0: The operation being invoked does not have any specified linked
operations.
 1: The operation being invoked has specified linked operations.
If this parameter is omitted it is assumed the operation being invoked
does not have specified linked operations.
Where the INAP API code functions are used, this parameter is supplied
automatically if the operation is able to be a parent of a linked operation.

Parameter name INAPPN_provider_error

Parameter length Fixed set to 1.
Parameter data Used by the INAP module to indicate a negative response to an
operation invocation requested by the User application for network
reasons.
 1: Duplicate Invoke ID - The user provided Invoke id for the
invocation request collided with the invoke id of an existing
invocation at the remote system.
 2: Unrecognized OP - The operation requested is not supported at
the remote system.
 3: Mistyped Parameter - The remote system was unable to decode
the operation invocation.
 4: Unrecognized Linked ID - The remote system did not have an
active invocation matching the linked id.
 5: Linked Response Unexpected - The remote system was not
expecting the linked response.
 6: Unexpected Linked Operation - The remote system was not
expecting the linked operation invocation.
 7: Initiating Release - The remote system was unable to accept the
operation invocation because the dialogue was being released.
 8: Resource Limitation - The remote system was unable to accept
the operation invocation due to resource limitations.
 9: No response from peer - The operation invoked by the User
application has timed out without a response being received.
 10: Invalid Response from peer - A response to an operation invoked
by the User application was received. The response could not be
decoded.
 11: Service Completion Failure - An expected response from the
remote system was not received.

Parameter name INAPPN_priority

Parameter length Fixed set to 1.
Parameter data Used by the User application to indicate the MTP message priority for
the SS7 message resulting from the operation invocation.
Used only in ANSI mode. See Section 5.1 INAP Configuration Request
on page 57
Where the INAP API code and decode functions are used, this
parameter is supplied automatically.

30
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter name INAPPN_qos

Parameter length Fixed, set to 1
Parameter data The octet is an indicator octet. The coding is as follows:
 bit 0 - Set to 1 if the Return Option is selected.
 bit 1 - Set to 1 if Sequence Control is required.
All other bits are reserved for future use and must be set to zero.
Note: The API version of this parameter (INDP_qos) cannot be used
with service primitives.

31
4 Functional API User Interface

4 Functional API User Interface

4.1 Introduction
The INAP module provides the means for transmitting INAP operations
between Functional Entities. The module requires the INAP operations coded
as a TCAP component ([4] on page 7), following the basic ASN.1 encoding
rules ([3] on page 7).
A suite of API functions is supplied to provide a convenient way to build and
recover the INAP module messages. The API functions also provide the
coding and de-coding of INAP operations and their parameters as TCAP
components.
The API interface is entirely procedural. The user application need not be
aware of the data structures used to handle the dialogue primitives and
service requests.
The suite of API functions provides the following features:
 Message buffer allocation and de-allocation.
 Dialogue handling.
 IN service handling.
 Generic Parameter handling.
 Component code and decode.
 Ability to send and receive user extensions to operations.

The API suite of functions is generic to all INAP services. INAP operations
and associated parameters are identified using API interface codes that are
defined in the API header file “in_inc.h”.
The user places INAP operations and associated parameters in a "component
structure". The type definition of this component structure is available to the
user, permitting the user to create instances of it as required. However, the
API functions conceal the internal contents of the structure from the user
application.
API functions are used to obtain an inter-process message structure.
An API coding function is then used to build an INAP Service Request
message in this message structure using the contents of the component
structure. The INAP operation and associated parameters placed in the
component structure by the user application are coded using the Basic
Encoding Rules of ASN.1 see [3] on page 7.
An API function can then be used to send the message structure to the INAP
module.
Operation results and errors are handled in a similar way.
API function suites are available for the ETSI, ITU, CAMEL, AIN and CS1+
standards for INAP.

32
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

4.2 API Function Specifications

The functions of the API interface are listed below. Function parameters are
identified as well as any return values.

Message Buffer Handling Parameters Return Usage

API Functions Value
IN_alloc_message() alloc_options msg Allocate message buffers
The type of the message buffer
pointer is “HDR *”
IN_free_message() msg status De-allocates message buffers
IN_send_message() user_id status Sends message buffer to INAP
inap_id module.
msg

Message Buffer Handling Parameters Return Usage

API Functions Value
IN_init_component() prot_spec status Initialize the component buffer. The
cpt user application is free to create
instances of the component buffer as
init_options1 required.
This function should be used to
initialize the component structure for
use with a protocol specified by the
prot_spec variable. It must be called
before using a cpt structure for
coding or decoding

Build Dialogue Request API Parameters Return Usage

Functions Value
IN_set_dialogue_param() param_name status Sets parameter “param_name”
len in the “msg” message structure.
Copies “len” octets of parameter
data_ptr data from the “data_ptr”
msg The available “param_names”
are defined in the in_inc.h
header file.
IN_dialogue_open() dlg_id status Builds an OPEN dialogue
and msg primitive in the given message
structure.
IN_EXT_dialogue_open()1
Parameters already present in
the message structure are
verified for the OPEN action.
IN_dialogue_close() dlg_id status Builds a CLOSE dialogue
and msg primitive in the given message
structure.
IN_EXT_dialogue_close()
Parameters already present in
the message structure are
verified for the CLOSE action.

1
Where two function names are presented, the IN_* function is for use when the Extended Dialog ID option is disabled
(dlg_id is 16 bits) and the IN_EXT_* function is for use when the option is enabled (dlg_id is 32 bits).
33
4 Functional API User Interface

Build Dialogue Request API Parameters Return Usage

Functions Value
IN_dialogue_delimit() dlg_id status Builds a DELIMIT dialogue
and msg primitive in the given message
structure.
IN_EXT_dialogue_delimit()
No parameters are required for
this action.
IN_dialogue_u_abort() dlg_id status Builds a U-ABORT dialogue
and msg primitive in the given message
structure.
IN_EXT_dialogue_u_abort()
Parameters already present in
the message structure are
verified for the U-ABORT action.
IN_dialogue_open_rsp () dlg_id status Builds an Open Response
and msg dialogue primitive in the given
message structure.
IN_EXT_dialogue_open_rsp ()
Parameters already present in
the message structure are
verified for the Open Response
action.

Read Dialogue Request Parameters Return Usage

API Functions Value

IN_get_dialogue_type() msg status Used where the user application

dlg_type_ptr needs to determine type of dialogue
in received message.
The available “Dialogue type codes”
are defined in the in_inc.h header
file.
IN_get_dialogue_param() param_name status Retrieves parameter “param_name”
param_len from the “msg” message structure.
data_ptr Copies received parameter data to
max_len “data_ptr” and sets “param_len” to
the number of bytes copied.
msg

Build Operation in Parameters Return Usage

Component Buffer Value
API Functions
IN_set_operation() op_name status Used to place the required operation
timeout code into the component structure.
cpt See also Note A on page 35.

IN_set_error() error_op status Used to place the required error

err_name code into the component structure.
cpt See also Note A on page 35.

IN_set_result() result_op status Used to set the operation code that

cpt triggered the result.
See also Note A on page 35.

34
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Build Operation in Parameters Return Usage

Component Buffer Value
API Functions
IN_set_component_param() param_name status Used to place the required
len parameter into the component
structure.
data_ptr
See also Note A below.
cpt

Note A: An error status is returned if the parameter, operation or error is invalid or is too
large for the component structure. However, it is not necessary to check the
status after setting each parameter. The first error to occur is recorded in the
component structure and may be obtained using the function
IN_get_component_first_error(). The functions IN_code_operation_invoke(),
IN_code_result() or IN_code_error() will return IN_ERROR_IN_COMPONENT if an
error is stored in the component structure during an attempt to build an INAP
message.

Read Operation from Parameters Return Usage

Component Buffer Value
API Functions
IN_get_component_first_error() cpt status When using API functions to get
error_rsn_ptr or set operations, errors, results
and associated parameters to
and from component structures,
the return status code of each
function may be checked
individually. As an alternative,
the first function to fail places its
return code in the component
structures and this may be
checked for once the
component handling is
complete.
This function is used to obtain
this error from the component
structure.
IN_get_operation() cpt status Used to obtain the value of the
op_name_ptr received operation code.

IN_get_error() cpt status Used to obtain the value of the

err_name_ptr received error code.

IN_get_component_param() param_name status Used to obtain the received

param_len parameter from the component
structure.
data_ptr
Note: Received parameters of
max_len ASN.1 NULL type return a
cpt length of 0 and a status of
IN_SUCCESS.
Copies the component
parameter data to the user data
area pointed to by "data_ptr".
Places the number of octets
copied in the location indicated
by “param_len”. "max_len"
gives the maximum number of
octets available in the user data
area.

35
4 Functional API User Interface

Code Service Request from Parameters Return Usage

Component Buffer Value
API Functions
IN_code_operation_invoke() dlg_id status Codes the component in the
and cpt given component structure as
an invoke component into the
IN_EXT_code_operation_invoke() msg given message structure.
IN_code_result() dlg_id status Codes the component in the
and cpt given component structure as
a result component into the
IN_EXT_code_result() msg given message structure.
IN_code_error() dlg_id status Codes the component in the
and cpt given component structure as
an error component or as a
IN_EXT_code_error() msg Reject component as
appropriate for the nature of
the user error parameter. The
coded component is built into
the given message structure.
IN_code_reject() dlg_id status Where an API decode function
and cpt returns
"IN_REJECT_REQUIRED" a
IN_EXT_code_reject() msg provider problem has been
detected. The decode API
function places the detected
problem component in the
component structure. This
function is used to build a
reject INAP Service Request
message.

De-code Service Indication Parameters Return Usage

from Component Buffer Value
API Functions
IN_get_component_type() msg status Used to obtain the component
cpt_type_ptr type of a received message.

IN_decode_operation() cpt status The operation and associated

msg parameters are decoded from
the component parameter of the
received message into the given
component structure.
If a provider problem is detected
during decoding that requires
the transmission of a reject
component to the remote system
this function returns a status of
"IN_REJECT_REQUIRED". The
problem code is placed in the
component structure. This
component structure should be
used with the IN_code_reject()
function to build the required
reject message, which should
then be sent to the INAP
module.

36
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

De-code Service Indication Parameters Return Usage

from Component Buffer Value
API Functions
IN_decode_result() cpt status The parameters of the result are
msg decoded from the component
parameter of the received
message into the given
component structure.
Any provider problem detected
during decoding is handled in
the same way as during invoke
component decoding.
IN_decode_error() cpt status The error code and associated
msg parameters are decoded from
the component parameter of the
received message into the given
component structure.
Any provider problem detected
during decoding is handled in
the same way as during invoke
component decoding.

API support Parameters Return Usage

API Functions Value

IN_get_prot_spec prot_def prot_spec Returns a pointer to a protocol

specification.
This function can be called to
get a ‘prot_spec’ pointer to pass
to other IN functions.
IN_init_applic_contexts prot_spec status Issues the Configure Application
user_id Context messages to the INAP
module for the contexts
inap_id supported by this API suite.
This function should be called at
system start up and whenever
the INAP module is initialized.

IN_version maj_rev status Used to provide information on

min_rev the version of the API library.
The text variable will be updated
text to point to the name of the API.
IN_set_param_length_range prot_spec status Used to override the pre-set
param_name parameter length ranges with
alternative values.
length_min
This function should be used to
length_max redefine the default length range
of protocol parameters. The
protocol specification to change
is indicated by the "prot_spec"
parameter. This will affect all
components using that protocol
specification.

37
4 Functional API User Interface

API support Parameters Return Usage

API Functions Value

IN_get_dialogue_id() dlg_id_ptr status Returns the dialog ID from the

and msg given (Dialog or Service)
message.
IN_EXT_get_dialogue_id()

4.3 API Function Parameter Specifications

The function parameters of the API interface are listed below. Parameter
types are identified in ‘C’.

Parameter name alloc_options

Parameter type u32
Notes Option flags for the IN_alloc_message function. The following flag
bits are defined.
 Bit 0 – IN_ALLOC_OPTION_LMSGS – set to indicate if the
allocated message is to be a large message.
 All other bits – set to zero.

Parameter name cpt

Parameter type pointer to IN_CPT
Notes Pointer to component structure.
The type of the component buffer pointer is “IN_CPT *" defined in the
in_inc.h header file.
The User application should create instances of this as required.
However the user application need not be aware of the internal
structure of this type.

Parameter name cpt_type_ptr

Parameter type pointer to u8
Notes Pointer to User Application variable into which the interface codes for
the component type will be placed.
Value defined in the API header file in_inc.h.

Parameter name data_ptr

Parameter type u8
Notes Pointer to the first octet of user data.

38
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter name dlg_id

Parameter type u16 or u322
Notes User defined id code for the dialogue. The range of dialogue ids
available to the user is configured in the INAP module configuration
message.

Parameter name dlg_type_ptr

Parameter type pointer to u8
Notes Pointer to User Application variable into which the defined interface
code for the dialogue type will be placed.
Value defined in the API header file in_inc.h.

Parameter name err_name

Parameter type u16
Notes INAP error code.
The available error codes are defined in the API header file.

Parameter name err_name_ptr

Parameter type pointer to u16
Notes Pointer to User Application variable into which the code for the
required INAP error will be placed.
The available error codes are defined in the API header file.

Parameter name error_op

Parameter type u16
Notes Code for the operation whose invocation this error relates to.
The available operation codes are defined in the API header files and
have the prefix ‘INOP_’ or ‘AINOP_’.

Parameter name error_rsn_ptr

Parameter type pointer to s16
Notes Pointer to a User Application variable into which the status code
returned by the first component handling function to fail is placed.
The available status codes are defined in the API header file.

Parameter name inap_id

Parameter type u8
Notes Contains the module id of the INAP module.

2
Dependant of whether the function is for Extended Dialog IDs (IN_EXT_*) or not (IN_*).
39
4 Functional API User Interface

Parameter name init_options

Parameter type u32
Notes Option flags for the IN_init_component function. The following flag
bits are defined.
 Bit 0 – IN_INIT_OPTION_CODE_SHIFT – set to indicate if Code
Shift is supported (may be generated in INAP)
 All other bits – set to zero.

Parameter name len

Parameter type u16
Notes Contains length of parameter data in octets.

Parameter name length_min

Parameter type u16
Notes Contains minimum length of parameter data in octets.

Parameter name length_max

Parameter type u16
Notes Contains maximum length of parameter data in octets.

Parameter name maj_rev

Parameter type pointer to u16
Notes Updated to show the major version number for the API library

Parameter name min_rev

Parameter type pointer to u16
Notes Updated to show the minor version number for the API library

Parameter name max_len

Parameter type u16
Notes Specifies the maximum length of parameter buffer data in octets in
order to prevent overflow.

Parameter name msg

Parameter type pointer to HDR
Notes Pointer to an inter process message structure.

Parameter name op_name

Parameter type u16
Notes API interface code for the required operation.
API interface operation codes defined in the API header files.

40
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter name op_name_ptr

Parameter type pointer to u16
Notes Pointer to User Application variable into which the API interface code
for the required operation will be placed.
API interface operation codes defined in the API header files.

Parameter name param_name

Parameter type u16
Notes Values defined in the API header file to identify the parameter.
When used with the IN_set_dialogue_param() function the available
parameters are detailed in Section 4.5 API Dialogue Parameters on
page 52. Dialogue parameters are common to all INAP
implementations.
When used with the IN_set_component_param() function the
available parameters depend on the INAP operation set supported by
the API supplied. These are detailed in Appendix B on page 80.

Parameter name param_len

Parameter type pointer to u16
Notes Pointer to User Application variable into which the length of the
recovered parameter is placed.

Parameter name prot_def

Parameter type u16
Notes Value to pass to the ‘IN_get_prot_spec’ function to gain a ‘prot_spec’
pointer to a given protocol.
 Use “INETS_300_374_1_PROTOCOL” for coding under ETS
300 374 1.
 Use “INEN_301_140_1_PROTOCOL” for coding under EN 301
140-1.
 Use “INITU_Q1218_PROTOCOL” for coding under ITU Q.1218.
 Use “INCAP_V1_PROTOCOL” for coding under CAMEL v1.
 Use “INCAP_V2_PROTOCOL” for coding under CAMEL v2.
 Use “INCAP_V3_PROTOCOL” for coding under CAMEL v3.
 Use “INCAP_V4_PROTOCOL” for coding under CAMEL v4.
 Use “INCAP_IMS_PROTOCOL” for coding under CAMEL v4 for
IMS.
 Use “AINGR_1299_PROTOCOL” for coding under AIN.
 Use “IN_CS1PLUS_PROTOCOL” for coding under CS1+.

Parameter name prot_spec

Parameter type pointer to void
Notes Pointer to a pre-defined table specifying protocol definitions for
parameter length ranges, ASN operation coding, Application Context
handling and Error codes.
The user need not be aware of the internal structure used.
Note: The ‘IN_get_prot_spec’ function is used to define these
pointers.

41
4 Functional API User Interface

Parameter name result_op

Parameter type u16
Notes Code for the operation whose invocation this result relates to.
Value defined in the API header files.

Parameter name status

Parameter type s16
Notes Code returned by API functions indicating success or failure.
 0: IN_SUCCESS
 -1: IN_GENERAL_FAILURE
 -2: IN_INVALID_MESSAGE_HEADER
 -3: IN_MESSAGE_BUFFER_OVERFLOW
 -4: N_INVALID_PARAM_ Name
 -5: IN_INVALID_PARAM_LEN
 -6: IN_INVALID_OPERATION
 -7: IN_INVALID_ERROR
 -8: IN_INVALID_TIMEOUT
 -9: IN_INVALID_PROTOCOL_SPEC
 -10: IN_INVALID_COMPONENT_POINTER
 -11: IN_ERROR_IN_COMPONENT
 -12: IN_INVALID_COMPONENT_TYPE
 -13: IN_COMPONENT_BUFFER_OVERFLOW
 -14: IN_COMPONENT_CODING_ERROR
 -15: IN_PARAM_NOT_FOUND
 -16: IN_PARAM_BUFFER_OVERFLOW
 -17: IN_APPLIC_CONTEXT_NOT_FOUND
 -18: IN_APPLIC_CONTEXT_ERROR
 -19: IN_COMPONENT_NOT_FOUND
 -20: IN_INVOKE_ID_NOT_FOUND
 -21: IN_OP_CODE_NOT_FOUND
 -22: IN_INVALID_LINKED_OPERATION
 -23: IN_INVALID_OPERATION_CLASS
 -24: IN_REJECT_REQUIRED
 -25: IN_INVALID_DIALOG_ID
Values defined in the API header file in_inc.h.

Parameter name text

Parameter type pointer to char *
Notes Updated to point to a text name for the API.

Parameter name timeout

Parameter type u16

42
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Notes Timeout for the operation invocation.

If the timeout parameter is set to zero, the longest timeout specified
for the operation is used.
If the timeout parameter is set to a duration outside the specified
range for the operation, the coding function returns an error.

Parameter name user_id

Parameter type u8
Notes Contains the module id of the User Application module.

4.4 INAP – API Message Sequence Charts

In the following sections, message sequence charts are used to show
example sequences of API function calls with associated INAP and TCAP
module messages. The first example shows a dialogue being opened at the
local system and the second example shows the case where the dialogue is
opened at the remote system. In all cases, only the messages at the local
system are shown.

4.4.1 Outgoing Dialogue

INAP INAP TCAP
User

See Opening a --INAP_DLG_REQ(OPEN)

Dialogue
(p. 44)

See Sending --INAP_SRV_REQ(INVOKE)

an Operation
(p. 44)

--TCAP_INVOKE

See Sending a --INAP_DLG_REQ(DELIMIT)

Delimit (p. 45)

--TCAP_BEGIN

TCAP_CONTINUE--

See Receiving INAP_DLG_IND(OPEN-RSP)--

an Open
Response
(p. 45)

See Decoding INAP_SRV_IND(INVOKE)--

an Operation
(p. 46)

INAP_DLG_IND(DELIMIT)--

TCAP_END--

See Receiving INAP_DLG_IND(CLOSE)--

a Close (p. 47)

43
4 Functional API User Interface

Opening a Dialogue
In order to open a dialogue with a remote system the user application obtains
a message structure and fills in the associated parameters. The message can
then be set as a dialogue open before sending to the INAP module. One of
the parameters in the open message should indicate the application context
to be used for the length of the dialogue. This can either be the application
context index or full application context. The application context index is used
to reference a pre-configured application context.

h = IN_alloc_message(0);
IN_set_dialogue_param(INDP_dest_address,len,dptr,h);
IN_set_dialogue_param(INDP_orig_address,len,dptr,h);
IN_set_dialogue_param(INDP_applic_context_index,len,dptr,h);
IN_dialogue_open(dlg_id,h);
IN_send_message(user_id,inap_id,h);

Nothing will be sent to the remote system at this point. The INAP binary
module is waiting for any INAP operation invocations with which the user may
wish to open the dialogue. The dialogue id chosen for the open request
should be an idle dialogue from the outgoing range defined by the values in
the INAP configuration message (see Section 5.1 INAP Configuration Request
on page 57).

Sending an Operation
To send an operation on an opened dialogue first a message structure is
obtained in the same way as for dialogue messages. The user must then
initialize an instance of a component structure, denoted here as ‘cpt’. This
initializes the fields in the component structure, including setting the protocol
to be used to encode or decode messages. The cpt structure is used to store
information ready for encoding into a message structure. The
IN_set_operation is used to set the operation and timeout values. The
IN_set_component_parameter procedure is used to store parameter data into
the cpt structure. Once all of the required parameters are stored in the
component, the IN_code_operation_invoke encodes the data from the cpt
structure into the message structure ready for sending to the INAP module.

h = IN_alloc_message(0);
IN_init_component(prot_spec,cpt);
IN_set_operation(op_name,timeout,cpt);
IN_set_component_param(INPN_InvokeID,len,dptr,cpt);
IN_set_component_param(param1,len,dptr,cpt);
IN_set_component_param(param2,len,dptr,cpt);
IN_code_operation_invoke(dlg_id,cpt,h);
IN_send_message(user_id,inap_id,h);

44
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Sending a Delimit
The delimit message is built and sent in a similar way to the open message.
Once this is received by the INAP binary, any pending components will be
sent to the remote system in a TCAP Begin message.

h = IN_alloc_message(0);
IN_dialogue_delimit(dlg_id,h);
IN_send_message(user_id,inap_id,h);

Receiving an Open Response

The procedure GCT_receive can be used to receive the incoming message.
The message type will indicate it is a dialogue indication and the procedure
IN_get_dialogue_type will show the message is an open response. The open
response message will indicate in the result parameter whether the remote
system wishes to accept or reject the dialogue.

h = GCT_receive();

switch (h->type)
{
case INAP_MSG_SRV_IND :
...
break;

case INAP_MSG_DLG_IND :
IN_get_dialogue_type(h,dlg_type_ptr);
switch (dlg_type_ptr)
{
...
case INDT_OPEN_RSP:

IN_get_dialogue_param(INDP_result,lenptr,dptr,max_len,h);

IN_get_dialogue_param(INDP_refuse_rsn,lenptr,dptr,max_len,h);

IN_get_dialogue_param(INDP_applic_context,lenptr,dptr,max_len,h);
...
break;
...
}
break;
...
}
relm(h);

45
4 Functional API User Interface

Decoding an Operation
The operation invoke message is received in the same way as the dialogue
open response, but in this case the message type will indicate it is a service
indication. The procedure IN_get_component_type can be used to see the
procedure is an operation invoke. Just as when encoding an operation into a
service request, a component structure must be initialized ready for use when
decoding a component from a service indication message.

h = GCT_receive();

switch (h->type)
{
case INAP_MSG_SRV_IND :
IN_get_component_type(h,&cpt_type);
switch (cpt_type)
{
case INCPT_INVOKE :
IN_init_component(prot_spec,cpt);
IN_decode_operation(cpt,h);
IN_get_component_param(param1,lenptr,dptr,buffer_size,cpt);
IN_get_component_param(param2,lenptr,dptr,buffer_size,cpt);
...
break;
...
break;

case INAP_MSG_DLG_IND :
...
}
break;
...
}
relm(h);

If the message received is corrupted or does not contain mandatory

parameters, the return code from IN_decode_operation will indicate a reject
is required. The cpt structure used for the decoding of the operation will have
the information needed for the reject already encoded in it. The
IN_code_reject procedure can be used to build the reject from the cpt
structure before sending to the remote system.

46
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Receiving a Close
The procedure GCT_receive can be used to receive the incoming message.
The message type will indicate that it is a dialogue indication and the
procedure IN_get_dialogue_type will show the message is a close.

h = GCT_receive();

switch (h->type)
{
case INAP_MSG_SRV_IND :
...
break;

case INAP_MSG_DLG_IND :

IN_get_dialogue_type(h,dlg_type_ptr);
switch (dlg_type_ptr)
{
...
case INDT_CLOSE:
IN_get_dialogue_param(INDP_release_method,lenptr,dptr,max_len,m);
...
break;
...
}
break;
...
}
relm(h);

The close indicates that the dialogue should be ended and no further
communication for that dialogue is possible. Resources for that dialogue
should be closed and the dialogue id should be made available for re-use.

47
4 Functional API User Interface

4.4.2 Incoming Dialogue

INAP User INAP TCAP

TCAP_BEGIN--

See Receiving a INAP_DLG_IND(OPEN)--

Dialogue Open (p. 48)

TCAP_INVOKE--

See Decoding an INAP_SRV_IND(INVOKE)--

Operation (p. 49)

See Decoding a INAP_DLG_IND(DELIMIT)--

Delimit (p. 50)

See Sending an Open --INAP_DLG_REQ(OPEN_RSP)

Response (p. 50)

See Sending an --INAP_SRV_REQ(INVOKE)

Operation (p. 50)

--TCAP_INVOKE

--INAP_DLG_REQ(DELIMIT)

--TCAP_CONTINUE

See Sending a Close --INAP_DLG_REQ(CLOSE)

(p. 51)

--TCAP_END

Receiving a Dialogue Open

A dialogue open indication can be decoded in the same way as other dialogue
indications shown in the previous example. The value of the dialogue id is
chosen from idle dialogues by the INAP binary module. The valid ids are
defined by the values in the in INAP configuration message. (See Section 5.1
INAP Configuration Request on page 57.)
If the INAP binary has been pre-configured with valid application contexts
using the INAP_MSG_CNF_AC message then it will handle the application
context negotiation. This means when it receives a request to open a dialogue
for a particular application context it knows which are supported by the local
system. If the incoming application context matches one of the supported
application contexts then the open indication will contain the corresponding
application context index. See Section 5.5 INAP Application Context
Configuration Request on page 66 for more information on configuring
application contexts.

48
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

If application contexts have not be pre-configured, then the open indication

will contain the full application context and this application context will have
to be echoed back to the remote system in the open response and any other
dialogue requests.

h = GCT_receive();

switch (h->type)
{
case INAP_MSG_SRV_IND :
...
break;

case INAP_MSG_DLG_IND :

IN_get_dialogue_type(h,dlg_type_ptr);
switch (dlg_type_ptr)
{
...
case INDT_OPEN:
IN_get_dialogue_param(INDP_dest_address,lenptr,dptr,max_len,m);
IN_get_dialogue_param(INDP_orig_address,lenptr,dptr,max_len,m);
IN_get_dialogue_param(INDP_dest_FE,lenptr,dptr,max_len,m);
IN_get_dialogue_param(INDP_orig_FE,lenptr,dptr,max_len,m);
IN_get_dialogue_param(INDP_applic_context_index,lenptr,dptr,
max_len,m);
...
break;
...
}
break;
...
}
relm(h);

Decoding an Operation
The operation decode can be performed as described in Decoding an
Operation on page 46.

49
4 Functional API User Interface

Decoding a Delimit
The procedure GCT_receive can be used to receive the incoming message.
The message type will indicate it is a dialogue indication and the procedure
IN_get_dialogue_type will show the message is a delimit.

h = GCT_receive();

switch (h->type)
{
case INAP_MSG_SRV_IND :
...
break;

case INAP_MSG_DLG_IND :

IN_get_dialogue_type(h,dlg_type_ptr);
switch (dlg_type_ptr)
{
...
case INDT_DELIMIT:
...
break;
...
}
break;
...
}
relm(h);

The delimit indicates that all of the pending group of operations, results or
errors received from the remote system in the same message over the
signaling link have been sent from the INAP binary.

Sending an Open Response

The open response is built and sent in a similar way to the open message.

m = IN_alloc_message(0);
IN_set_dialogue_param(param1,len,dptr,m);
IN_set_dialogue_param(param2,len,dptr,m);
IN_set_dialogue_param(param3,len,dptr,m);
IN_dialogue_open_rsp(dlg_id,m);
IN_send_message(user_id,inap_id,m);

Sending an Operation
The operation encode and send can be performed as described in Sending an
Operation on page 44.
As before the sending of the operation will not trigger a message to be sent
to INAP until a delimit (or close) is sent to INAP.

50
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Sending a Close
The close request is sent to end the dialogue with the remote system and the
release method parameter should be used to show whether this should be a
normal or pre-arranged end.

m = IN_alloc_message(0):
IN_dialogue_close(dlg_id,m);
IN_set_dialogue_param(INDP_release_method,len,dptr,m);
IN_send_message(user_id,inap_id,m);

4.4.3 Incoming Dialogue with Pre-arranged End

INAP User INAP TCAP

TCAP_BEGIN--

INAP_DLG_IND(OPEN)--

TCAP_INVOKE--

INAP_SRV_IND(INVOKE)--

INAP_DLG_IND(DELIMIT)--

--INAP_DLG_REQ(OPEN_RSP)

--INAP_SRV_REQ(INVOKE)

--TCAP_INVOKE

--INAP_DLG_REQ(DELIMIT)

--TCAP_CONTINUE

Closing a --INAP_DLG_REQ(CLOSE)
Dialogue with PRE_ARRANGED_END
Pre-arranged
End below

Waiting
for timeout

 TCAP_L_CANCEL--

Close INAP_DLG_IND(CLOSE)— --TCAP_END

Indication on (On operation timeout) (Pre-arranged end, no
Operation message to remote
Timeout (p. 52) system)

Closing a Dialogue with Pre-arranged End

INAP and TCAP specifications allow a dialogue to be closed under some
conditions without an explicit TC-END being sent over the SS7 link. If a close
with release reason of pre-arranged end is sent to INAP then the module will
wait until the operation timers of outgoing operations have expired before
closing the dialogue. Any component waiting to be sent from INAP will be
discarded. To send pending components, a delimit must preceded the close
pre-arranged end.

51
4 Functional API User Interface

Close Indication on Operation Timeout

When the operation timer expires the INAP binary will send a close indication
to the user module to allow the user to free their dialogue resources. After
sending the indication INAP will free its own resources for the dialogue.
Waiting for the timeout allows for any possible errors to the operation to be
returned before the dialogue closes. The release confirm parameter can be
used to differentiate between a normal close indication and a close confirm
following a close pre-arranged end.

4.5 API Dialogue Parameters

The functional API permits the user to establish, maintain and terminate
dialogues with remote Functional Entities.
The dialogue control functions are common to all INAP applications.
The API functions act to send and receive dialogue request and indication
messages to the INAP module. The parameters that are required for these
messages are those detailed in the message specifications given in Chapter 3
INAP Module User Interface on page 12.
The mnemonics available to the user application for the parameter names are
provided in the interface include file (in_inc.h) accompanying the API.
The parameters that should be placed in the message structure using the
IN_set_dialogue_param() function for each of the message primitive types
are summarized below.

IN Dialogue Primitive Type

Parameter INDT_OPEN INDT_ INDT_ INDT_U_ INDT_OPEN_

CLOSE DELIMIT ABORT RSP

Destination address A

Originating address B

Destination reference A

Originating reference B

Result M

Refuse reason O

Release method M

User reason M

Application context
O O O O O
name

Application context
C O
index

User Information

52
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

IN Dialogue Primitive Type

NC O

Idle Timeout O O O

QoS O O O O O

Key

Symbol Description
M Mandatory The message will be discarded if the corresponding parameter is
omitted
O Optional The parameter is not essential
A Exclusive OR One of the parameters marked A must be included.
B Exclusive OR One of the parameters marked B must be included.
C Conditional The parameter marked C must be included if AC negotiation is
enabled.

The parameters that may be recovered from the message structure using the
IN_get_dialogue_param() function for each of the message primitive types
are summarized below.

IN Dialogue Primitive Type

Parameter INDT_ INDT_ INDT_ INDT_U_ INDT_P_ INDT_ INDT_

OPEN CLOSE DELIMIT ABORT ABORT OPEN_RSP NOTICE

Destination
A
address

Originating
B
address

Destination
A
reference

Originating
B
reference

Result M

Refuse
O
reason

User
M
reason

Provider
M
reason

Application
context O O O O O
name

53
4 Functional API User Interface

IN Dialogue Primitive Type

Parameter INDT_ INDT_ INDT_ INDT_U_ INDT_P_ INDT_ INDT_

OPEN CLOSE DELIMIT ABORT ABORT OPEN_RSP NOTICE

Application
context C O
index

Source M

Problem
M
diagnostic

Release
O
confirm

Report
O
Cause

User
O O O O
Information

The available parameter mnemonics are summarized below:

Parameter Mnemonic Value (dec) Value (hex)

Destination address INDP_dest_address 1 0x01
Originating address INDP_orig_address 3 0x03
Result INDP_result 5 0x05
Refuse reason INDP_refuse_rsn 6 0x06
Release method INDP_release_method 7 0x07
User reason INDP_user_rsn 8 0x08
Provider reason INDP_prov_rsn 9 0x09
User Information INDP_user_info 10 0x0a
Application context name INDP_applic_context 11 0x0b
Source INDP_source 12 0x0c
Problem diagnostic INDP_prob_diag 13 0x0d
Destination FE code INDP_dest_FE 14 0x0e
Originating FE code INDP_orig_FE 15 0x0f
Application Context Index INDP_applic_context_index 27 0x1b
Release Confirm INDP_release_confirm 28 0x1c
QoS INDP_qos 29 0x1d
Report Cause INDP_report_cause 30 0x1e
Network Context INDP_nc 31 0x1f
Idle Timeout INDP_dlg_idle_timeout 32 0x20
3
Dialog ID INDP_did 33 0x21

3
The API user should not defined Dialog ID as a parameter, this is handled automatically by the API functions (IN_EXT_*)
when the dialog is codedor or the service built.
54
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter Mnemonic Value (dec) Value (hex)

RIID INDP_riid 34 0x22

The parameters are used as required by the INAP module. See Chapter 3
INAP Module User Interface on page 12.

55
5 Non-Primitive Interface

5 Non-Primitive Interface
In addition to the primitive interface for passing INAP protocol messages
between the INAP module and the User application, the INAP module
supports a non-primitive interface for implementation-specific functionality.
The non-primitive interface permits the configuration of the INAP module.
It also allows the INAP module to supply diagnostic information, protocol
error events and software error events to the local system management and
maintenance modules.
This section describes the formats of all the messages used in the non-
primitive interface.
All of the messages handled by the INAP module may request a confirmation
by setting the rsp_req field in the message header.
The confirmation message consists of the received message echoed back to
the sending module. The status field of the confirmation message header may
take one of the following values.

Mnemonic Value Description

INAPE_BAD_ID 1 Inappropriate or invalid id in request message
INAPE_BAD_STATE 2 Message received in wrong state.
INAPE_BAD_MSG 5 Unsupported message received.
INAPE_BAD_PARAM 6 Invalid parameters contained in message.
INAPE_NO_RESOURCES 7 Insufficient internal message resources.
INAPE_INVALID_NC 8 Invalid Network Context
INAPE_INVALID_VERSION 9 Message version is invalid
INAPE_BAD_LENGTH 11 Bad Length
INAPE_LICENCE_ERR 14 Failed due to a licensing restriction

56
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

5.1 INAP Configuration Request

Synopsis
Message used to configure the INAP module for operation.

Message Format
Message Header
Field Name Meaning
type INAP_MSG_CONFIG (0x77f4)
id 0
src Sending module_id
dst INAP_TASK_ID
rsp_req used to request a confirmation
hclass 0
status 0
err_info 0
len 40

Parameter Area
Offset Size Name
0 1 user_id
1 1 TCAP_id
2 1 mngt_id
3 1 maint_id
4 1 trace_id
5 1 version – set to 1
6 4 base_usr_ogdlg_id
10 4 base_usr_icdlg_id
14 4 base_tc_ogdlg_id
18 4 base_tc_icdlg_id
22 4 nog_dialogues
26 4 nic_dialogues
30 4 num_invokes
34 4 options
38 2 reserved

Description
This message is used to configure the INAP module for operation. It should
be the first message sent to the module. Any messages received before a
valid configuration message will be discarded. It should only be issued once.
57
5 Non-Primitive Interface

The message parameters relate to the environment in which the INAP module
is operating.

Parameter Description

version

Message Format Version. For the format defined in this document set this to
1. Older formats will continue to work for a period, but support may
eventually be discontinued.

user_id

User Application module ID.

Note: The INAP module may be configured with Functional Entity references
(see Section 5.4 INAP Functional Entity Configuration Request on page 64).
These references permit a module ID to be associated with each local FE.
The User ID configured here acts as the default User Application ID for
received messages whose destination address is not among the configured
local FEs.

TCAP_id

TCAP module ID.

mngt_id

Management module ID. The module to which software event indications are
sent.

maint_id

Maintenance module ID. The module to which maintenance event indications

are sent.

trace_id

Trace module ID. The module to which trace event indications are sent.

base_usr_ogdlg_id

The first dialogue ID for outgoing dialogues. The user assigns dialogue IDs for
outgoing dialogues. The User should assign values in the range
base_ogdlg_id to (base_ogdlg_id + nog_dialogues - 1). The user must ensure
that the dialogue ID is included in all protocol messages sent via the outgoing
dialogue.

base_usr_icdlg_id

The first dialogue ID for incoming dialogues. The INAP module allocates the
dialogue ID for incoming dialogues. It uses values in the range base_icdlg_id
to (base_icdlg_id + nic_dialogues - 1) for this purpose. It is important that
different ranges of values are used for incoming and outgoing dialogues on
the user interface. This prevents the INAP module assigning a dialogue ID to
an incoming dialogue at the same instant the user assigns it to an outgoing
dialogue.

58
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

base_tc_ogdlg_id

The first dialogue ID for outgoing dialogues for use on the INAP module -
TCAP interface. The INAP module allocates dialogue IDs for outgoing
dialogues. It uses values in the range base_tc_ogdlg_id to (base_tc_ogdlg_id
+ nog_dialogues - 1) for this purpose.

base_tc_icdlg_id

The first dialogue ID for incoming dialogues for use on the INAP module -
TCAP interface. The TCAP module allocates the dialogue ID for incoming
dialogues. It uses values in the range base_tc_icdlg_id to (base_tc_icdlg_id +
nic_dialogues - 1) for this purpose. It is important that different ranges of
values are used for incoming and outgoing dialogues on the INAP module –
TCAP interface. This prevents the INAP module assigning a dialogue id to an
outgoing dialogue at the same instant TCAP assigns it to an incoming
dialogue.

nog_dialogues

The maximum number of simultaneous outgoing dialogues that the module is

required to support. This value is compared with a compile time constant to
ensure that the module has sufficient internal resources to handle the
requested maximum number of outgoing dialogues.

nic_dialogues

The maximum number of simultaneous incoming dialogues that the module is

required to support. This value is compared with a compile time constant to
ensure that the module has sufficient internal resources to handle the
requested maximum number of incoming dialogues.

num_invokes

The maximum number of simultaneous invocations that the module is

required to support. This value is compared with a compile time constant to
ensure that the module has sufficient internal resources to handle the
requested number of simultaneous invocations.

Options

Run time options are assigned according to the following table.

Bit Mnemonic Description

0 INAPF_ANSI ANSI operation
If set to one the module will handle ANSI format TCAP
components specified according to ANSI T1.114. No
application contexts should normally be configured for
ANSI operation.
If not set the INAP module will handle ITU format TCAP
components specified according to ITU Q.773.

59
5 Non-Primitive Interface

Bit Mnemonic Description

1 INAPF_TRNS_AC Transparent Application Context
If set to one, the module will convey the Application
Context received in incoming dialogue messages to the
user in the "Application Context Name" parameter. The
user may also provide the Application Context for
outgoing dialogue messages using the same
"Application Context Name" parameter.
This permits the user application to handle application
context negotiation if so required. It can also be used to
enable interworking with implementations that do not
make use of application contexts by forcing the module
to ignore the application context parameter.
The "Application Context Name" parameter is not used if
this option is not set.
2 INAPF_24PC Use 24 bit point codes.
If set to one, the module will expect 24 bit point codes
when examining Functional Entity Addresses.
If set to zero, the module will expect 14 bit point codes
when examining Functional Entity Addresses.
3 INAPF_NULL_TC_CONT Null TC-CONTINUE
If set, the INAP module will generate an
INAPDT_DELIMITER_IND on reception of TC-
CONTINUE without any component in the established
state.
If not set, the Null TC-CONTINUE will be discarded
(default operation)
4 INAPF_SEGMENTATION Set to 1 to enable segmentation support when used with
an appropriate SCCP and TCAP configuration.
5 INAPF_EXT_DID Set 1 to use Extended Dialog ID mode. This mode
allows uses 32 bits for dialog IDs and allows more than
64K dialogs to use used (subject to licencing).
If not set, Dialog IDs are 16 bits and use the Message
‘id’ field. Total number of dialogs is limited to 64K.
6 - 15 none Reserved.
Reserved bits should be set to zero.

Reserved

Reserved for future use. Should be set to zero.

60
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

5.2 INAP Network Context Configuration Request

Synopsis
Message used to configure a Network Context.

Message Format
Message Header
Field Name Meaning
type INAP_MSG_NC_CONFIG (0x77f8)
id Network Context id (value 1 to 3)
src Sending module_id
dst INAP_TASK_ID
rsp_req used to request a confirmation
hclass 0
status 0
err_info 0
len 40

Parameter Area
Offset Size Name
0 1 cnf_ver
1 1 user_id
2 1 TCAP_id
3 2 options
5 35 reserved

Description
This allows the configuration of additional Network Contexts. The
INAP_MSG_CONFIG (0x77f4) message should be used to configure the
default Network Context for the first network. For each subsequent Network
Context, the message INAP_MSG_NC_CONFIG is required. The
INAP_MSG_NC_CONFIG message contains parameters to define address
format and INAP specific options and therefore allows different behavior for
the module to be selected depending on the Network Context of the dialogue.
The meaning of the parameters in the INAP_MSG_NC_CONFIG message is
the same as the equivalent parameters in the INAP_MSG_CONFIG message.
When used to support multiple local point codes within the same network, the
options settings should typically be the same in both messages.

Parameter Description
Network Context Id

61
5 Non-Primitive Interface

The Network Context id will identify the Network Context being defined. The
default Network Context (0) is configured using the existing
INAP_MSG_CONFIG message therefore this message should only be used for
Network Contexts 1 to 3. This assumes that four Network Contexts are
permitted.
cnf_ver

Version of this NC configuration message. (Currently only version zero).

user_id

INAP-User module ID for this NC.

TCAP_id

TCAP module ID for this NC.

options

Run-time options assigned for this NC. Defined according to the options field
table for the INAP_MSG_CONFIG message.

reserved

Reserved for future use. Should be set to zero.

62
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

5.3 INAP Timer Configuration Request

Synopsis
Message used to set up default protocol timers for use by the INAP module.

Message Format
Message Header
Field Name Meaning
type INAP_MSG_CNF_TIM (0x77f5)
id 0
src Sending module_id
dst INAP_TASK_ID
rsp_req used to request a confirmation
hclass 0
status 0
err_info 0
len 40

Parameter Area
Offset Size Name
0 2 tguard

Description
This message is used to configure the INAP protocol timers for operation. It
should be sent to the module before any protocol messages are sent or
received.
Timer values are in seconds.

Parameter Description

tguard

Timer: Waiting for a response from the User application. A minimum value of
5 seconds is recommended. If the Configure Timers message is not sent, a
default value of 50 seconds will be used.

63
5 Non-Primitive Interface

5.4 INAP Functional Entity Configuration Request

Synopsis

Message used to set up the internal Functional Entity records.

Message Format

Message Header
Field Name Meaning
type INAP_MSG_CNF_FE (0x77f7)
id FE reference
src Sending module_id
dst INAP_TASK_ID
rsp_req used to request a confirmation
hclass 0
status 0
err_info 0
len 40

Parameter Area
Offset Size Name
0 2 FE options
2 1 Local FE module ID
3 1 FE SCCP address length
4 18 FE SCCP address
22 2 NC
24 16 Reserved

Description
This message is used to configure the INAP functional entity records for
operation. These allow the User application to refer to Functional Entities in
the network via a local reference rather than providing the full SCCP address.
All Functional Entity configuration messages must contain the FE reference
assigned by the User application to this FE. This is encoded in the message
header and does not form part of the parameter area. The user may
subsequently use this reference in the “Destination FE” or “Originating FE”
parameters of the INAP_OPEN_DLG primitive or “IN_dialogue_open” API
function. This reference is used instead of the destination or origination
address parameter.

64
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter Description

FE options

Run time options assigned according to the following table:

Bit Mnemonic Description

0 INAPFE_LOCAL Local FE. If set to one the FE is local, i.e.: it is at the
local point code. If not set the FE resides at a remote
point code.
1 INAPFE_ALL_NC FE is present for all NC networks
2 - 15 none Reserved. Reserved bits should be set to zero.

Local FE module ID

Used when the FE is located at the local point code.

Single octet indicating the Module Id to which messages addressed to this FE
should be sent. Used only for local FEs. This permits the INAP module to
support INAP dialogues to several local FEs distinguished by their SCCP
addresses.

Note: Any message received whose destination address has not been configured using
the FE configuration message is sent to the User Application Module ID configured
in the module configuration message.

Note: Within the local SCCP module, local FEs must be configured as Local Sub Systems.
If the INAP and TCAP module are to be shared between FEs, all Local Sub Systems
must be configured to use the same TCAP module ID.

FE SCCP address length

The length of the SCCP address of the Functional Entity.

FE SCCP address

The SCCP address of the Functional Entity.

NC

Network Context to which the FE applies.

Reserved

Reserved for future use. Should be set to zero.

65
5 Non-Primitive Interface

5.5 INAP Application Context Configuration Request

Synopsis
Message used to set up the internal Application Context records.

Message Format
Message Header
Field Name Meaning
type INAP_MSG_CNF_AC (0x77f6)
id Application Context Reference
src Sending module_id
dst INAP_TASK_ID
rsp_req used to request a confirmation
hclass 0
status 0
err_info 0
len 9 + ac_len

Parameter Area
Offset Size Name
0 8 Reserved
8 1 Application Context Length (ac_len)
9 ac_len Application Context

Description
This message is used to configure the INAP Application Context records for
use. These control the application context negotiation that the module
conducts during dialogue establishment. All supported application contexts
must be individually configured using this message.
The module will only accept incoming dialogues with configured Application
Contexts. If a dialogue request with an unconfigured context is received, a
dialogue abort message is returned to the requesting Functional Entity.
If no supported Application Contexts are configured, the application context
negotiation is disabled. The module will accept all incoming dialogues.
The number of Application Context records available to the user is configured
at module initialization using the Module Configuration message.
All Application Context configuration messages must contain the AC reference
assigned by the User application to this AC. This is encoded in the message
header and does not form part of the parameter area. The user may
subsequently use this reference in the “ac_reference” parameter of the
INAP_OPEN_DLG primitive or “IN_dialogue_open” API function to indicate the
application context required for the dialogue.

66
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter Description

Reserved

Reserved for future use. Should be set to zero.

Application Context Length

The application context length indicates the number of octets representing

the Application Context.

Application Context

The octet string specified in the relevant IN standard to represent the

required application context. Encoded as specified in Q.773 commencing with
the Object Identifier Name tag. This is the same format as expected for the
parameter INAPPN_applic_context.

67
5 Non-Primitive Interface

5.6 Read Revision Request

Synopsis
Message used to request the module type and software revision number.

Message Format
Message Header
Field Name Meaning
type GEN_MSG_MOD_IDENT (0x6111)
id 0
src Originating module ID
dst INAP_TASK_ID
rsp_req Sending layer’s bit must be set
hclass 0
status 0
err_info 0
len 28

Parameter Area
Offset Size Name
0 2 type Currently undefined
2 1 maj_rev Major version number
3 1 min_rev Minor version number
4 24 text Null terminated string giving textual module identity

Description
This message is provided to request a reply indicating the software version
for module under test.
On receipt of this request the module returns the message with status
"SUCCESS" to the sender including the information requested.

68
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

5.7 INAP Software Event Indication

Synopsis
Message used by INAP to indicate an implementation specific software related
event to the local management module.

Message Format
Message Header
Field Name Meaning
type INAP_MSG_ERROR_IND (0x07f8)
id See below
src INAP_TASK_ID
dst Management module id
rsp_req 0
class 0
status Software event code (see below)
err_info 0
len 0 or 4
Parameter Area
Offset Size Name
0 4 Dialog ID

Description
This message is used by INAP to notify system management of various
software events which under normal operating conditions should not occur.
These events may be due to lack of system resource or error within the
system.

Parameter Description

Dialog ID

The 32 bit Dialog ID of the current dialog. The parameter is only returned
when the INAPF_EXT_DID option is set.

69
5 Non-Primitive Interface

Software Event Code

The Software event code contained in the status field of the message
indicates the type of event. Possible values are listed in the following table,
which also lists the meaning of the id field in each case.

Mnemonic Code Id Description

INAPSWE_NO_MSSM 1 0 Maximum number of active
invocations exceeded.
INAPSWE_NO_DLG 2 0 No internal resource to handle
dialogue.
INAPSWE_NO_ISM 3 0 Internal pool of structured
messages exhausted.
INAPSWE_ISM_LOW 4 0 Internal pool of structured
messages running low.
INAPSWE_BAD_MSG 5 msg_type Unrecognized inter process
message received.
INAPSWE_TX_FMT_ERR 6 0 Internal error during message
formatting.
INAPSWE_USER_BAD_FMT 7 msg_type Badly formatted message received
from User.
INAPSWE_TCAP_BAD_FMT 8 msg_type Badly formatted message received
from TCAP.
INAPSWE_UNREC_TYPE 9 msg_type Unrecognized message received
from TCAP.
INAPSWE_INVALID_DLG_ID 10 dlg_id Message received with
unrecognized dialogue id.
INAPSWE_INVALID_NC 11 nc Message received with
unrecognized Network Context.
INAPSWE_USER_MSG_UNEXP 12 dialog_state An unexpected message has been
received from the INAP User.
INAPSWE_DLG_ID_ERR 13 dlg_id A valid Dialog Id could not be found
in message received from INAP
User or TCAP.

dialog_state

Valid dialogue states that may be reported in software event indications with status
INAPSWE_USER_MSG_UNEXP (12) are listed in the table below:

Dialogue State Value Description

DSM_S_IDLE 0 Idle
DSM_S_WAIT_USER_REQ 1 Waiting for user requests
DSM_S_DLG_INIT 2 Dialogue initiated
DSM_S_DLG_PEND 3 Dialogue pending
DSM_S_DLG_ACCEPT 4 Dialogue accepted
DSM_S_DLG_EST 5 Dialogue established
DSM_S_DLG_TERM 6 Dialog terminating
DSM_S_PROC_COMP 7 Waiting for TCAP request components
DSM_S_WAIT_COMP 8 Waiting for TCAP response components
DSM_S_RXED_OPEN_RSP 9 Received User Open Response message

70
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

5.8 INAP Maintenance Event Indication

Synopsis
Message used by INAP to indicate a protocol related event to the local
maintenance module.

Message Format
Message Header
Field Name Meaning
type INAP_MSG_MAINT_IND (0x07f9)
id See below
src INAP_TASK_ID
dst Maintenance module id
rsp_req 0
class 0
status Maintenance event code (see below)
err_info 0
len 0

Description
This message is used by INAP to indicate a protocol related to the
maintenance module.

Maintenance Event Code

The Maintenance event code contained in the status field of the message
indicates the type of event. Possible values are listed in the following table,
which also lists the meaning of the id field in each case.

Mnemonic Code Id Description

INAPME_INVALID_AC 0x1 dlg_id Dialogue received from TCAP with unrecognized
Application Context.
INAPME_INVALID_NC 0x02 dlg_id Dialogue received from INAP-User or TCAP with
unrecognized Network Context.

71
5 Non-Primitive Interface

5.9 INAP Management Event Indication

Synopsis
This message is issued by the INAP module to notify system management of
general software events that under normal operating conditions should not
occur. These events may be due to lack of system resources or errors within
the software.

Message Format
Message Header
Field Name Meaning
type MGT_MSG_EVENT_IND (0x0008)
id 0
src MAP_TASK_ID
dst Management module ID
rsp_req 0
hclass 0
status Management event code (see below)
err_info Time-stamp
reserved 0
len 0

Management Event Code

The Management event code contained in the status field of the message
indicates the type of event. Possible values are listed in the following table
which also lists the meaning of the id field in each case.

Mnemonic Value id Description

ERR_SDLSIG_LOW 47 0x2f 0 The internal signal queue is running short of entries. If
this fault persists, the software should be re-built with
more signals allocated to the signal queue.
ERR_NO_SDLSIG 46 0x2e 0 The internal signal queue has been exhausted. If this
event occurs then correct operation of the module is
not guaranteed.

72
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

5.10 INAP Trace Mask Request

Synopsis
Message used to configure INAP to send a trace message to the trace module
whenever a specific message type is sent or received. The trace module is
identified in the INAP configuration request message.

Message Format
Message Header
Field Name Meaning
type INAP_MSG_TRACE_MASK (0x57fb)
id 0
src Sending module ID
dst INAP_TASK_ID
rsp_req Used to request a confirmation
hclass 0
status 0
err_info 0
len 12

Parameter Area
Offset Size Name
0 4 op_evt_mask - Output event trace mask
4 4 ip_evt_mask - Input event trace mask
8 4 non_prim_mask - Non-primitive trace mask

Description

op_evt_mask

The output event trace mask. This is a 32-bit value with bits set to 1 to cause
a trace message to be sent to the system trace module when INAP sends the
associated protocol message.

Bit 31 30 29 28 27 26 25 24
Value 0 0 0 0 0 0 0 0

Bit 23 22 21 20 19 18 17 16
Value 0 0 0 0 0 0 0 0

Bit 15 14 13 12 11 10 9 8

73
5 Non-Primitive Interface

Value 0 0 0 0 0 0 0 0

Bit 7 6 5 4 3 2 1 0
Value 0 0 0 0 TCCMP TCDLG INAPSRV INAPDLG
_REQ _REQ _IND _IND

TCCMP_REQ – Component request primitive from INAP to TCAP.

TCDLG_REQ – Dialogue request primitive from INAP to TCAP.
INAPSRV_IND – Service indication primitive from INAP to the user.
INAPDLG_IND – Dialogue indication primitive from INAP to the user.

ip_evt_mask

The input event trace mask. This is a 32-bit value with bits set to 1 to cause a
trace message to be sent to the system trace module when INAP receives the
associated protocol message.

Bit 31 30 29 28 27 26 25 24
Value 0 0 0 0 0 0 0 0

Bit 23 22 21 20 19 18 17 16
Value 0 0 0 0 0 0 0 0

Bit 15 14 13 12 11 10 9 8
Value 0 0 0 0 0 0 0 0

Bit 7 6 5 4 3 2 1 0
Value 0 0 0 0 TCCMP TCDLG INAPSRV INAPDLG
_IND _IND _REQ _REQ

TCCMP_IND – Component Indication primitive from TCAP to INAP.

TCDLG_IND – Dialogue Indication primitive from TCAP to INAP.
INAPSRV_REQ – Service request primitive from the User to INAP.
INAPDLG_REQ – Dialogue request primitive from the User to INAP.

non_prim_mask

The non-primitive trace mask. This is a 32-bit value with bits set to 1 to
cause a trace message to be sent to the system trace module when INAP
receives the associated non-primitive message.

Bit 31 30 29 28 27 26 25 24
Value 0 0 0 0 0 0 0 0

74
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Bit 23 22 21 20 19 18 17 16
Value 0 0 0 0 0 0 0 0

Bit 15 14 13 12 11 10 9 8
Value 0 0 0 0 0 0 0 0

Bit 7 6 5 4 3 2 1 0
Value 0 CNF CNF SSW SMT SW MT CNF
_AC _FE _ MSK _ MSK _EVT _EVT _TIM

CNF_AC - Application Context Configuration Message received by INAP.

CNF_FE - Functional Entity Configuration Message received by INAP.
SSW_MSK - Software Event Mask Request message received by INAP.
SMT_MSK - Maintenance Mask Request message received by INAP.
SW_EVT – Software Error Event indication message sent by INAP to the
management module.
MT_EVT – Maintenance Event indication message sent by INAP to the
maintenance module.
CNF_TIM – Timer Configuration Message received by INAP.

75
5 Non-Primitive Interface

5.11 Trace Event Indication

Synopsis
The INAP trace event masks are used to enable tracing of all messages sent
or received by the INAP module. The traced messages are reported in event
indication messages as shown below:

Message Format
Message Header
Field Name Meaning
type MGT_MSG_TRACE_EV (0x0003)
id 0
src INAP_TASK_ID
dst Trace module id
rsp_req 0
hclass 0
status 0
err_info 0
len 18 + length of traced data

Parameter Area
Offset Size Name
0 1 source module id
1 1 destination module id
2 2 id
4 2 type
6 2 status
8 4 timestamp
12 4 pointer to the message being traced
16 2 data length
18 0 .. 280 data - Data taken from the contents of the MSG parameter area.

76
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

5.12 INAP Maintenance Mask Request

Synopsis
Message used to configure which maintenance events INAP should trigger the
sending of a maintenance event indication message.

Message Format
Message Header
Field Name Meaning
type INAP_MSG_S_MAINT_MASK (0x57fd)
id 0
src Sending module ID
dst INAP_TASK_ID
rsp_req Used to request a confirmation
class 0
status 0
err_info 0
len 9

Parameter Area
Offset Size Name
0 9 mask

Mask
A bit mask indicating the maintenance events which are active. A ‘1’ indicates
that an event is active and a ‘0’ indicates that it is not. The first octet sent is
for maintenance event codes 0-7, (bit 0 for event code 0) the second octet
for maintenance event codes 8-15, (bit 0 for event code 8) etc.
Pad unused bits with zeros.
The maintenance events currently reported in the INAP Maintenance Event
Indication message detailed in Section 5.8 INAP Maintenance Event Indication
on page 71.

77
5 Non-Primitive Interface

5.13 INAP Software Event Mask Request

Synopsis
Message used to configure the software error events for which INAP will send
a software event indication message.

Message Format
Message Header
Field Name Meaning
type INAP_MSG_S_ERROR_MASK (0x57fc)
id 0
src Sending module ID
dst INAP_TASK_ID
rsp_req Used to request a confirmation
class 0
status 0
err_info 0
len 9

Parameter Area
Offset Size Name
0 9 mask

Mask
A bit mask indicating the software events which are active. A ‘1’ indicates
that an event is active, and a ‘0’ indicates that is not active. The first octet
sent is for software event codes 0-7 (bit 0 for event code 0), the second octet
for software event codes 8-15 (bit 0 for event code 8), etc.
Pad unused bits with zeros.
All software events currently reported in the INAP Software Event Indication
message detailed in Section 5.7 INAP Software Event Indication on page 69
are enabled by default.

78
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Appendix A. Tick Timer Message Format

A.1 Tick Timer Message Format

Synopsis
The INAP module requires a periodic “tick timer” message. This must be sent
at the required frequency, nominally every tenth of a second.

Message Format
Message Header
Field Name Meaning
type TM_EXP (0xc002)
id Index to timer table
src Sending module ID
dst INAP_TASK_ID
rsp_req 0
class 0
status 0
err_info 0
len 4

Parameter Area
Offset Size Name
0 4 Timer type

79
5 Non-Primitive Interface

Appendix B. Supported INAP Application Contexts

B.1 Overview
This appendix contains the following information:
 Supported INAP Application Contexts. See page 81.
 Supported INAP Operations. See page 85.
 Supported INAP Operation Parameters. See page 89.
 ETSI CS-1 Operation Definitions. See page 91.
 ITU-T CS-1 Operation Definitions. See page 106.
 CAMEL v1 Operation Definitions. See page 121.
 CAMEL v2 Operation Definitions. See page 125.
 CAMEL v3 Operation Definitions. See page 137.
 CAMEL v4 Operation Definitions. See page 164.
 CAMEL v4 for IMS Operation Definitions. See page 202.
 ETSI CS-2 Operation Definitions. See page 206.
 CS1+ Operation Definitions. See page 249.
 AIN Operation Definitions. See page 269.
 Operation Extensions. See page 282.
 Supported INAP Parameter List. See page 284.
 Supported INAP Operation Result. See page 311.
 Supported INAP Errors. See page 316.
 Supported INAP Error Parameters. See page 318.

80
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.2 Supported INAP Application Contexts

The API functions support INAP operations specified to ETSI, ITU-T, CAMEL
and AIN standards. The supported operations form part of the Application
Contexts listed below. Mnemonics are defined to allow the User application to
easily refer to a particular context.
The mnemonics identified below are defined in the in_inc.h header file
accompanying the API suite. They provide the parameter data for the
"data_ptr" parameter of the IN_set_dialogue_param() and
IN_get_dialogue_param() API functions when setting or recovering the
"Application context index" dialogue parameter.

Note: The INAP module may be configured to supply raw Application Context data to the
User Application if required. See Section 5.1 INAP Configuration Request on page
57.

B.2.1 ETSI CS-1

Specification: ETS 300 374-1, Sept 1994

Application context Mnemonic Value Value

(dec) (hex)
Core-INAP-CS1-SSP-to-SCP-AC INETS_AC_CS1_SSP_TO_SCP 0 0x0
Core-INAP-CS1-ASSIST- INETS_AC_CS1_ASSIST_HANDOFF_TO_SSP_TO_SCP 1 0x1
HANDOFF-TO-SSP-TO-SCP
Core-INAP-CS1-IP-TO-SCP INETS_AC_CS1_IP_TO_SCP 2 0x2
Core-INAP-CS1-SSP-to-SCP-AC INETS_AC_CS1_SCP_TO_SSP 3 0x3
Core-INAP-CS1-SCP-TO-SSP- INETS_AC_CS1_SCP_TO_SSP_TRAFFIC_MANAGEMENT 4 0x4
TRAFFIC-MANAGEMENT
Core-INAP-CS1-SCP-TO-SSP- INETS_AC_CS1_SCP_TO_SSP_SERVICE_MANAGEMENT 5 0x5
SERVICE-MANAGEMENT
Core-INAP-CS1-SSP-TO-SCP- INETS_AC_CS1_SSP_TO_SCP_SERVICE_MANAGEMENT 6 0x6
SERVICE-MANAGEMENT

B.2.2 ITU-T CS-1

Specification: Q.1218, October 1995

Application context Mnemonic Value Value

(dec) (hex)
IN-CS1-SSF-TO-SCF-GENERIC-AC INITU_CS1_SSF_TO_SCF_ GENERIC_AC 16 0x10
IN-CS1-SSF-TO-SCF-DPSPECIFIC-AC INITU_CS1_SSF_TO_SCF_ DPSPECIFIC_AC 17 0x11
IN-CS1-ASSIST-HANDOFF-SSF-TO-SCF- INITU_CS1_ASSIST_HANDOFF_ SSF_TO_SCF_AC 18 0x12
AC
IN-CS1-SRF-TO-SCF-AC INITU_CS1_SRF_TO_SCF_AC 19 0x13
IN-CS1-SCF-TO-SSF-AC INITU_CS1_SCF_TO_SSF_AC 20 0x14
IN-CS1-DP-SPECIFIC-SCF-TO-SSF-AC INITU_CS1_DP_SPECIFIC_SCF_ TO_SSF_AC 21 0x15

81
5 Non-Primitive Interface

Application context Mnemonic Value Value

(dec) (hex)
IN-CS1-SCF-TO-SSF-TRAFFIC- INITU_CS1_SCF_TO_SSF_ 22 0x16
MANAGEMENT-AC TRAFFIC_MANAGEMENT_AC
IN-CS1-SCF-TO-SSF-SERVICE- INITU_CS1_SCF_TO_SSF_ 23 0x17
MANAGEMENT-AC SERVICE_MANAGEMENT_AC
IN-CS1-SSF-TO-SCF-SERVICE- INITU_CS1_SSF_TO_SCF_ 24 0x18
MANAGEMENT-AC SERVICE_MANAGEMENT_AC
IN-CS1-SCF-TO-SSF-STATUS- INITU_CS1_SCF_TO_SSF_ 25 0x19
REPORTING-AC STATUS_REPORTING_AC

B.2.3 CAMEL v1
Specification: CAMEL Application Part (CAP) GSM 09.78 version 5.6.0 Release 1996

Application context Mnemonic Value Value

(dec) (hex)
CAP-v1-gsmSSF-TO-gsmSCF INCAP_V1_GSMSSF_TO_ GSMSCF 32 0x20

B.2.4 CAMEL v2
Specification: CAMEL Application Part (CAP) GSM 09.78 version 6.3.0 Release 1997

Application context Mnemonic Value Value

(dec) (hex)
CAP-v2-gsmSSF-to-gsmSCF INCAP_V2_GSMSSF_TO_ GSMSCF 33 0x21
CAP-v2-ASSIST-HANDOFF- INCAP_V2_ASSIST_HANDOFF_GSMSSF_TO_GSMSCF 34 0x22
gsmSSF-to-gsmSCF
CAP-v2- gsmSRF-to-gsmSCF INCAP_V2_GSMSRF_TO_ GSMSCF 35 0x23

B.2.5 CAMEL v3
Specification: CAMEL Application Part (CAP) 3GPP TS 29.078 version 4.6.0 Release 2002

Application context Mnemonic Value Value

(dec) (hex)
CAP-gsmSSF-scfGenericAC INCAP_V3_GSMSSF_TO_GSMSCF_GENERIC 80 0x50
CAP-gsmSSF-scfAssistHandoffAC INCAP_V3_ASSIST_HANDOFF_GSMSSF_TO_GSMSCF 81 0x51
CAP-gsmSRF-gsmSCF INCAP_V3_GSMSRF_TO_GSMSCF 82 0x52
CAP-gprsSSF-gsmSCF-AC INCAP_V3_GPRSSSF_TO_GSMSCF 83 0x53
CAP-gsmSCF-gprsSSF-AC INCAP_V3_GSMSCF_TO_GPRSSSF 84 0x54
CAP-v3-sms-AC INCAP_V3_SMS 85 0x55

82
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.2.6 CAMEL v4
Specification: CAMEL Application Part (CAP) 3GPP TS 29.078 7.3.0 (2006-06). See Section B.10
CAMEL v4 Operation Definitions on page 164 for operation parameter definitions.

Application context Mnemonic Value Value

(dec) (hex)

CAP-gsmSSF-scfGenericAC INCAP_V4_GSMSSF_TO_GSMSCF_GENERIC 112 0x70

CAP-gsmSSF-scfAssistHandoffAC INCAP_V4_ASSIST_HANDOFF_GSMSSF_TO_GSMSCF 113 0x71
CAP-scf-gsmSSFGenericAC INCAP_V4_SCF_TO_GSMSSF_GENERIC 114 0x72
gsmSRF-gsmSCF INCAP_V4_GSMSRF_TO_GSMSCF 115 0x73
CAP-gprsSSF-gsmSCF-AC INCAP_V4_GPRSSSF_TO_GSMSCF 116 0x74
CAP-gsmSCF-gprsSSF-AC INCAP_V4_GSMSCF_TO_GPRSSSF 117 0x75
cap4-sms-AC INCAP_V4_SMS 118 0x76

B.2.7 CAMEL v4 for IMS

Specification: CAMEL v4 for IMS protocol (3GPP TS 29.278 7.0.0). See Section B.11 CAMEL v4
for IMS Operation Definitions on page 202 for operation parameter definitions.

Application context Mnemonic Value Value

(dec) (hex)
CAP-IMSSF-scfGenericAC INCAP_V4_IM_SSF_TO_GSMSCF_GENERIC 144 0x90

B.2.8 ETSI CS-2

Specification: EN 301 140-1, June 1999

Application context Mnemonic Value Value

(dec) (hex)
CS2-SSF-to-SCF-AC GENERIC INETS_AC_CS2_SSF_SCF_ GENERIC 52 0x34
CS2-SSF-SCF-ASSIST- INETS_AC_CS2_SSF_SCF_ ASSIST_HANDOFF 54 0x36
HANDOFF
CS2-SSF-SCF-SERVICE- INETS_AC_CS2_SSF_SCF_ SERVICE_MANAGEMENT 55 0x37
MANAGEMENT
CS2-SCF-SSF-GENERIC INETS_AC_CS2_SCF_SSF_ GENERIC 56 0x38
CS2-SCF-SSF-TRAFFIC- INETS_AC_CS2_SCF_SSF_ TRAFFIC_MANAGEMENT 58 0x3a
MANAGEMENT
CS2-SCF-SSF-SERVICE- INETS_AC_CS2_SCF_SSF_ SERVICE_MANAGEMENT 59 0x3b
MANAGEMENT
CS2-SCF-SSF-TRIGGER- INETS_AC_CS2_SCF_SSF_ TRIGGER_MANAGEMENT 61 0x3d
MANAGEMENT
CS2-SCF-to-SRF-AC INETS_AC_CS2_SRF_SCF 62 0x3e
CS2-SCF-SCF- OPERATIONS INETS_AC_CS2_SCF_SCF_ OPERATIONS 69 0x45
CS2-DISTRIBUTED-SCF- INETS_AC_CS2_DISTRIBUTED_SCF_SYSTEM 70 0x46
SYSTEM
CS2-SCF-SCF- OPERATIONS- INETS_AC_CS2_SCF_SCF_ OPERATIONS_WITH_3SE 71 0x47
WITH-3SE

83
5 Non-Primitive Interface

Application context Mnemonic Value Value

(dec) (hex)
CS2-DISTRIBUTED-SCF- INETS_AC_CS2_DISTRIBUTED_SCF_SYSTEM_WITH_3SE 72 0x48
SYSTEM-WITH-3SE
CS2-SCF-CUSF INETS_AC_CS2_SCF_CUSF 73 0x49
CS2-CUSF-SCF INETS_AC_CS2_CUSF_SCF 74 0x4a

B.2.9 AIN
Specification: GR-1299-CORE, Issue 7, November 2001

Application context Mnemonic Value Value

(dec) (hex)
AIN-AC-GENERIC AINGR_1299_AC_GENERIC 60 0x3c

B.2.10 Ericsson INAP CS1+

Specification: Ericsson INAP CS1+

Application context Mnemonic Value Value

(dec) (hex)
CS1plus-SSP-to-SCP INAC_CS1PLUS_SSP_TO_SCP 240 0xf0
CS1plus-assist-handoff-SSP-to- INAC_CS1PLUS_ASSIST_HOFF_SSP_TO_SCP 241 0xf1
SCP
CS1plus-IP-to-SCP INAC_CS1PLUS_IP_TO_SCP 242 0xf2
CS1plus-SCP-to-SSP INAC_CS1PLUS_SCP_TO_SSP 243 0xf3
CS1plus-SCP-to-SSP-traffic- INAC_CS1PLUS_SCP_TO_SSP_TRAF_MAN 244 0xf4
management
CS1plus-SCP-to-SSP-service- INAC_CS1PLUS_SCP_TO_SSP_SERV_MAN 245 0xf5
management
CS1plus-SSP-to-SCP-service- INAC_CS1PLUS_SSP_TO_SCP_SERV_MAN 246 0xf6
management
CS1plus-data-management INAC_CS1PLUS_DATA_MAN 247 0xf7
CS1plus-SCP-to-SSP-traffic- INAC_CS1PLUS_SCP_TO_SSP_TRAF_LIMIT 248 0xf8
limitation

84
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.3 Supported INAP Operations

The API functions supports INAP and AIN operations specified to the standard appropriate to the
application context being supported; for example, the ETSI application contexts conform to ETS
300 374-1. Not all of the operations supported are present in every of the protocol standards.
The later operation definition sections show the operations appropriate to each standard.
The mnemonics identified below are defined in the in_inc.h header file accompanying the API
suite. They are used in the "op_name" parameter of the IN_set_operation() and
IN_get_operation() API functions.
The following INAP operations are currently supported.

Operation Mnemonic Value Value

(dec) (hex)
ActivateServiceFiltering INOP_ActivateServiceFiltering 42 0x2a
ActivityTest INOP_ActivityTest 55 0x37
ActivityTestGPRS INOP_ActivityTestGPRS 70 0x46
ApplyCharging INOP_ApplyCharging 35 0x23
ApplyChargingGPRS INOP_ApplyChargingGPRS 71 0x47
ApplyChargingReport INOP_ApplyChargingReport 36 0x24
ApplyChargingReportGPRS INOP_ApplyChargingReport GPRS 72 0x48
AssistRequestInstructions INOP_AssistRequestInstructions 16 0x10
CallGap INOP_CallGap 41 0x29
CallInformationReport INOP_CallInformationReport 44 0x2c
CallInformationRequest INOP_CallInformationRequest 45 0x2d
Cancel INOP_Cancel 53 0x35
CancelGPRS INOP_CancelGPRS 73 0x49
CollectInformation INOP_CollectInformation 27 0x1b
ConfirmedNotificationProvided INOP_ConfirmedNotification Provided 117 0x75
ConfirmedReportCharging Information INOP_ConfirmedReportChargingInformation 119 0x77
Connect INOP_Connect 20 0x14
ConnectAssociation INOP_ConnectAssociation 132 0x84
ConnectGPRS INOP_ConnectGPRS 74 0x4a
ConnectSMS INOP_ConnectSMS 62 0x3e
ConnectToResource INOP_ConnectToResource 19 0x13
Continue INOP_Continue 31 0x1f
ContinueAssociation INOP_ContinueAssociation 133 0x85
ContinueGPRS INOP_ContinueGPRS 75 0x4b
ContinueSMS INOP_ContinueSMS 65 0x41
ContinueWithArgument INOP_ContinueWithArgument 88 0x58
ContinueWithArgument (for CAP v3) INOP_CAPv3_ContinueWithArgument 56 0x38

85
5 Non-Primitive Interface

Operation Mnemonic Value Value

(dec) (hex)
CreateCallSegmentAssociation INOP_CreateCallSegmentAssociation 89 0x59
DFC_with_Argument INOP_DFC_with_Argument 86 0x56
DisconnectForwardConnection INOP_DisconnectForward Connection 18 0x12
DisconnectLeg INOP_DisconnectLeg 90 0x5a
EntityReleased INOP_EntityReleased 96 0x60
EntityReleasedGPRS INOP_EntityReleasedGPRS 76 0x4d
EstablishChargingRecord INOP_EstablishChargingRecord 112 0x70
EstablishTemporaryConnection INOP_EstablishTemporary Connection 17 0x11
EventNotificationCharging INOP_EventNotificationCharging 26 0x1a
EventReportBCSM INOP_EventReportBCSM 24 0x18
EventReportBCUSM INOP_EventReportBCUSM 134 0x86
EventReportGPRS INOP_EventReportGPRS 80 0x50
EventReportSMS INOP_EventReportSMS 64 0x40
FurnishChargingInformation INOP_FurnishCharging Information 34 0x22
FurnishChargingInformationGPRS INOP_FurnishCharging InformationGPRS 77 0x4d
FurnishChargingInformationSMS INOP_FurnishCharging InformationSMS 61 0x3d
HandlingInformationRequest INOP_HandlingInformation Request 113 0x71
HandlingInformationResult INOP_HandlingInformation Result 114 0x72
HoldCallPartyConnection INOP_HoldCallPartyConnection 4 0x04
InitialAssociationDP INOP_InitialAssociationDP 131 0x83
InitialDP INOP_InitialDP 0 0x00
InitialDPGPRS INOP_InitialDPGPRS 78 0x4e
InitialDPSMS INOP_InitialDPSMS 60 0x3c
InitiateAssociation INOP_InitiateAssociation 123 0x7b
InitiateCallAttempt INOP_InitiateCallAttempt 32 0x20
ManageTriggerData INOP_ManageTriggerData4 97 0x61
MergeCallSegments INOP_MergeCallSegments 91 0x5b
MoveCallSegments INOP_MoveCallSegment 92 0x5c
MoveLeg INOP_MoveLeg 93 0x5d
NetworkCapability INOP_NetworkCapability 115 0x73
NotificationProvided INOP_NotificationProvided 116 0x74
PlayAnnouncement INOP_PlayAnnouncement 47 0x2f
17
PlayTone INOP_PlayTone 97 0x61
PromptAndCollectUserInformation INOP_PromptAndCollectUser Information 48 0x30

4
INOP_PlayTone and INOP_ManageTriggerData both use value 97. INOP_PlayTone is used for CAMEL v4 and
INOP_ManageTriggerData is used for ETSI CS-2.
86
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Operation Mnemonic Value Value

(dec) (hex)
PromptAndReceive Message INOP_PromptAndReceive Message 107 0x6b
ProvideUserInformation INOP_ProvideUserInformation 118 0x76
Reconnect INOP_Reconnect 5 0x05
ReleaseAssociation INOP_ReleaseAssociation 126 0x7e
ReleaseCall INOP_ReleaseCall 22 0x16
ReleaseCallPartyConnection INOP_ReleaseCallPartyConnection 6 0x06
ReleaseGPRS INOP_ReleaseGPRS 79 0x4f
ReleaseSMS INOP_ReleaseSMS 66 0x42
ReportChargingInformation INOP_ReportCharging Information 120 0x78
ReportUTSI INOP_ReportUTSI 101 0x65
RequestNotification INOP_RequestNotification 121 0x79
RequestNotificationChargingEvent INOP_RequestNotification ChargingEvent 25 0x19
RequestReportBCSMEvent INOP_RequestReportBCSM Event 23 0x17
RequestReportBCUSMEvent INOP_RequestReportBCUSM Event 127 0x7f
RequestReportGPRSEvent INOP_RequestReportGPRS Event 81 0x51
RequestReportSMSEvent INOP_RequestReportSMSEvent 63 0x3f
RequestReportUTSI INOP_RequestReportUTSI 98 0x62
ResetTimer INOP_ResetTimer 33 0x21
ResetTimerGPRS INOP_ResetTimerGPRS 82 0x52
ResetTimerSMS INOP_ResetTimerSMS 67 0x43
5
Retrieve INOP_Retrieve 16 0x10
ScriptClose INOP_ScriptClose 111 0x6f
ScriptEvent INOP_ScriptEvent 109 0x6d
ScriptInformation INOP_ScriptInformation 108 0x6c
ScriptRun INOP_ScriptRun 110 0x6e
SendChargingInformation INOP_SendChargingInformation 46 0x2e
SendChargingInformationGPRS INOP_SendChargingInformation GPRS 83 0x53
SendSTUI INOP_SendSTUI 100 0x64
ServiceFilteringResponse INOP_ServiceFilteringResponse 43 0x2b
SpecializedResourceReport INOP_SpecializedResource Report 49 0x31
SplitLeg INOP_SplitLeg 95 0x5f

5
INOP_AssistRequestInstructions and INOP_retrieve both use value 16. INOP_retrieve is only used by CS1+. CS1+
however uses both operations (controlling which one by using the selected AC).
87
5 Non-Primitive Interface

The following AIN operations are currently supported:

Operation Mnemonic Value Value

(dec) (hex)
AnalyzeRoute AINOP_AnalyzeRoute 25857 0x6501
Disconnect AINOP_Disconnect 25859 0x6503
InfoAnalyzed AINOP_InfoAnalyzed 25603 0x6403
InfoCollected AINOP_InfoCollected 25602 0x6402
ResourceClear AINOP_ResourceClear 26114 0x6602
SendNotification AINOP_SendNotification 26373 0x6705
SendToResource AINOP_SendToReource 26113 0x6601
TerminationAttempt AINOP_TerminationAttempt 25605 0x6405

88
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.4 Supported INAP Operation Parameters

The parameters that may be placed in the component structure for each of
the supported operations are summarized below.
The mnemonics identified below are defined in the in_inc.h or ain_inc.h
header file accompanying the API suite. They are used in the "param_name"
parameter of the IN_set_component_param() and
IN_get_component_param() API functions.
There are two forms of parameter names:
 INPN_ParameterName
This is the form used for primitive parameters where there is only one of
the specified parameter in each operation.
For AIN the prefix is AINPN_, eg. AINPN_ ParameterName
 INPN_ParameterName(n)
This form is used in cases when more than one parameter of the specified
parameter name is possible in the operation. This can occur when the
ASN coding of a parameter is one of the forms shown below.
For AIN the prefix is AINPN_, eg. AINPN_ParameterName(n).

B.4.1 Case 1

PrimParamA ::= SEQUENCE Size (1 to 3) OF PrimType

In the case 1 above the parameter name mnemonic for PrimParamA would be
INPN_PrimParamA(n). In this form, the ‘n’ represents the position in the
sequence. Thus, to get the first, second or third element in the sequence, the
parameter names INPN_PrimParamA(0), INPN_PrimParamA(1) or
INPN_PrimParamA(2) should be used.

B.4.2 Case 2

ConstTypeB ::= SEQUENCE {

PrimParamC [0] PrimType
}
ConstParamB ::= SEQUENCE Size (1 to 16) OF ConstTypeB

In case 2, although the parameter PrimParamC is not a sequence itself, it is

part of a constructed type which is. This means in order to identify the correct
PrimParamC, the form INPN_PrimParamC(n) should be used. In this case, ‘n’
refers to the element in the sequence of ConstParamB.

89
5 Non-Primitive Interface

This form of parameter name makes it possible to use the parameter names
in loops:

for (n=0; n<3; n++)

{
…
IN_set_component_param(INPN_PrimParamC(n), len, data_ptr[n],
cpt);
…
}

Key

Symbol Description
M Mandatory The message will be discarded if the corresponding parameter
is omitted. It must be present for the operation to be formatted.
O Optional The parameter is not essential and need not be present in order
to format or recover an operation.
C Choice This parameter is part of a choice structure. Only one of the
parameters in the choice should be present.
D Default The parameter may be omitted from a message being sent. On
reception, if the parameter is not present in the message, the
default value for the parameter is recovered into the cpt
structure.
A ASN.1 Encoded This parameter is sent or received in raw ASN.1 coded form.
The parameter is included to allow user defined extensions to
the operations with the operation definition needing to be
changed. If more than one encoded parameter is present in the
case of Ellipsis data the component parameter will be a
concatenation of all of the encoded data.

For each letter, the number following it represents the depth of the sub-table
in constructed parameters. For example, the ConnectToResource operation
(Appendix B.5.5 ConnectToResource on page 93) has the IPRoutingAddress
and Null parameters marked as C2. The depth of two shows they are part of
the constructed parameter ResourceAddress marked as M.

ResourceAddress (constructor, sub-table depth 1) M

IPRoutingAddress (primative, sub-table depth 2) C2
Null (primative, sub-table depth 2) C2

90
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.5 ETSI CS-1 Operation Definitions

B.5.1 InitialDP
INOP_InitialDP
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ServiceKey INPN_ServiceKey 3 0x3 M
DialledDigits INPN_DialledDigits 4 0x4 O
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O
CallingPartyBuisness GroupID INPN_CallingPartyBuisness GroupID 7 0x7 O
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O
CallingPartySubaddress INPN_CallingPartySubaddress 9 0x9 O
CGEncountered INPN_cGEncountered 10 0xa O
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O
IPAvailable INPN_IPAvailable 12 0xc O
LocationNumber INPN_LocationNumber 13 0xd O
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ServiceProfileIdentifier INPN_ServiceProfileIdentifier 16 0x10 O
TerminalType INPN_TerminalType 17 0x11 O
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x13 O
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O
AdditionalCallingParty Number INPN_AdditionalCallingParty Number 21 0x15 O
ForwardCallIndicators INPN_ForwardCallIndicators 22 0x16 O
BearerCapability INPN_BearerCapability 23 0x17 O
EventTypeBCSM INPN_EventTypeBCSM(0) 192 0xc0 O
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O
RedirectionInformation INPN_RedirectionInformation 26 0x20 O
Ellipsis INPN_Ellipsis 112 0x70 A

91
5 Non-Primitive Interface

B.5.2 AssistRequestInstructions
INOP_AssistRequestInstructions
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CorrelationID INPN_CorrelationID 31 0x1f M
IPAvailable INPN_IPAvailable 12 0xc O
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.5.3 EstablishTemporaryConnection
INOP_EstablishTemporaryConnection
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
AssistingSSPIPRouting INPN_AssistingSSPIPRouting 102 0x66 M
Address Address
CorrelationID INPN_CorrelationID 31 0x1f O
ScfID INPN_ScfID 38 0x26 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.5.4 DisconnectForwardConnection
INOP_DisconnectForwardConnection
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

92
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.5.5 ConnectToResource
INOP_ConnectToResource
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ResourceAddress M
IPRoutingAddress INPN_IPRoutingAddress 31 0x1f C2
Null n/a C2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O
Ellipsis INPN_Ellipsis 112 0x70 A

If no IPRouting address is supplied a null resource address will be formatted.

B.5.6 Connect
INOP_Connect
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
DestinationRouting INPN_DestinationRouting Address(n) 27 0x1b M
Address (n = 0)
AlertingPattern INPN_AlertingPattern 30 0x1e O
CorrelationID INPN_CorrelationID 31 0x1f O
CutAndPaste INPN_CutAndPaste 32 0x20 O
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0cf O
RouteList INPN_RouteList(n) 35 0x23 O
(n = 0 to 2) to to
37 0x25
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ScfID INPN_ScfID 38 0x26 O
ForwardingCondition INPN_ForwardingCondition 33 0x21 O
ServiceInteraction INPN_ServiceInteraction Indicators 20 0x15 O
Indicators
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O
RedirectionInformation INPN_RedirectionInformation 26 0x1a O
Ellipsis INPN_Ellipsis 112 0x70 A

93
5 Non-Primitive Interface

B.5.7 ReleaseCall
INOP_ReleaseCall
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Cause INPN_Cause 41 0x29 O

B.5.8 RequestReportBCSMEvent
INOP_RequestReportBCSMEvent
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
BCSMEvents (SEQUENCE, size = 0 to 15) M
EventTypeBCSM INPN_EventTypeBCSM(n) 192 to 207 0xc0 to 0xcf M2
MonitorMode INPN_MonitorMode(n) 208 to 223 0xd0 to 0xdf M2
LegID O2
SendingSideID INPN_SendingSideID(n) 224 to 239 0xe0 to 0xef C3
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0 to 0xff C3
DPSpecificCriteria O2
NumberOfDigits INPN_NumberOfDigits(n) 160 to 175 0xa0 to 0xaf C3

ApplicationTimer INPN_ApplicationTimer(n) 176 to 191 0xb0 to 0xbf C3

Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

The BCSMEvent structure can be repeated up to sixteen times for each

operation. Replace ‘n’ with the position in the sequence of BCSMEvents
starting from 0. The LegID for each event may be specified as either a
SendingSideID or a ReceivingSideID. For some events, the LegID parameter
is mandatory, e.g. events O-MidCall, O-Disconnect, T-MidCall and T-
Disconnect in ETSI 300 374-1 must have this parameter present. For other
events, the legID may take default values. Similarly, the DPSpecificCriteria
for each event may be specified as either NumberOfDigits or
ApplicationTimer.

94
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.5.9 EventReportBCSM
INOP_EventReportBCSM
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x01 M
EventTypeBCSM INPN_EventTypeBCSM(0) 192 0xc0 M
EventSpecificInformationBCSM O
CollectedInfo C2
CalledPartyNumber INPN_CalledPartyNumber 5 0x05 M3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
AnalyzedInformation C2
CalledPartyNumber INPN_CalledPartyNumber 5 0x05 M3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
RouteSelectFailure C2
FailureCause INPN_FailureCause 94 0x5e O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
OcalledPartyBusy C2
BusyCause INPN_BusyCause 95 0x5f O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
OnoAnswer C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Oanswer C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
OmidCall C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Odisconnect C2
ReleaseCause INPN_ReleaseCause 96 0x60 O
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
TcalledPartyBusy C2
BusyCause INPN_BusyCause 95 0x5f O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
TnoAnswer C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Tanswer C2

95
5 Non-Primitive Interface

INOP_EventReportBCSM
Parameter Mnemonic Value
dec hex
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
TmidCall C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Tdisconnect C2
ReleaseCause INPN_ReleaseCause 96 0x60 O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
LegID O
SendingSideID INPN_SendingSideID(n) 224 to 239 0xe0 to 0xef C2
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0 to 0xff C2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
MiscCallInfo O
MessageType INPN_MessageType 56 0x38 D2
Default = request(0)
Ellipsis INPN_Ellipsis 112 0x70 A

The event specific information formatted or recovered is dependent on the

value of INPN_EventTypeBCSM(0). For example, if its value is collectedInfo
(2), then the format procedures will use the parameter
INPN_CalledPartyNumber.

B.5.10 RequestNotificationChargingEvent
INOP_RequestNotificationChargingEvent
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ChargingEvent (SEQUENCE, size = 1 to 16) M
EventTypeCharging INPN_EventTypeCharging(n) 272 to 287 0x110 to 0x11f M2
MonitorMode INPN_MonitorMode(n) 208 to 223 0xd0 to 0xdf M2
LegID O2
SendingSideID INPN_SendingSideID(n) 224 to 239 0xe0 to 0xef C3
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0 to 0xff C3
Ellipsis INPN_Ellipsis 112 0x70 A

96
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.5.11 EventNotificationCharging
INOP_EventNotificationCharging
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
EventTypeCharging INPN_EventTypeCharging(0) 272 0x110 M
EventSpecificInformationCharging INPN_EventSpecificInformationCharging 58 0x3a O
LegID O
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
MonitorMode INPN_MonitorMode(0) 208 0xd0 M
Ellipsis INPN_Ellipsis 112 0x70 A

B.5.12 CollectInformation
INOP_CollectInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.5.13 Continue
INOP_Continue
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

B.5.14 InitiateCallAttempt
INOP_InitiateCallAttempt
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
DestinationRouting Address INPN_DestinationRouting Address(n) 27 0x1b M
(n = 0)
AlertingPattern INPN_AlertingPattern 30 0x1e O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x15 O
97
5 Non-Primitive Interface

INOP_InitiateCallAttempt
Parameter Mnemonic Value
dec hex
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.5.15 ResetTimer
INOP_ResetTimer
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
TimerID INPN_TimerID 61 0x3d M
TimerValue INPN_TimerValue 62 0x3e M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.5.16 FurnishChargingInformation
INOP_FurnishChargingInformation
Parameter Mnemonic Value
dec hex
InvokeId INPN_InvokeId 1 0x1 M
FurnishCharging Information INPN_FCIBillingChargingCharacteristics 34 0x22 M

B.5.17 ApplyCharging
INOP_ApplyCharging
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
AchBillingCharging INPN_AchBillingCharging 52 0x34 M
Characteristics Characteristics
SendCalculationToSCP INPN_SendCalculationToSCP 53 0x35 D
Indication Indication
Default = False
PartyToCharge O
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

98
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.5.18 ApplyChargingReport
INOP_ApplyChargingReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CallResult INPN_CallResult 55 0x37 M

B.5.19 CallGap
INOP_CallGap
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
GapCriteria M
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 C2
GapOnService C2
ServiceKey INPN_ServiceKey 3 0x3 M3
CalledAddressAndService C2
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3
ServiceKey INPN_ServiceKey 3 0x3 M3
CallingAddressAndService C2
CallingAddressValue INPN_CallingAddressValue 99 0x63 M3
ServiceKey INPN_ServiceKey 3 0x3 M3
LocationNumber INPN_LocationNumber 13 0xd O3
GapIndicators M
Gap Duration INPN_Gap_Duration 72 0x48 M2
GapInterval INPN_GapInterval 73 0x49 M2
ControlType INPN_ControlType 101 0x65 O
GapTreatment O
InformationToSend C2
See InformationToSend (Sub-table) on page 100.
ReleaseCause INPN_ReleaseCause 96 0x60 C2
Both C2
InformationToSend M3
See InformationToSend (Sub-table) on page 100.
ReleaseCause INPN_ReleaseCause 96 0x60 M3
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

99
5 Non-Primitive Interface

InformationToSend (Sub-table)
InformationToSend
Parameter Mnemonic Value
dec hex
InbandInfo C
MessageID O2
ElementaryMessageID INPN_ElementaryMessageID 628 0x274 C3
Text C3
MessageContent INPN_MessageContent 65 0x41 M4
Attributes INPN_Attributes 66 0x42 O4
ElementaryMessageIDs INPN_Elementary MessageIDs(n) 256 to 271 0x100 to 0x11f C3
VariableMessage C3
ElementaryMessageID INPN_Variable_MessageID 629 0x275 M4
VariableParts M4
Integer INPN_Integer(n) 528 to 532 0x210 to 0x214 C5
Number INPN_Number(n) 533 to 537 0x215 to 0x210 C5
Time INPN_Time(n) 538 to 541 0x21a to x21e C5
Date INPN_Date(n) 542 to 547 0x21f to 0x223 C5
Price INPN_Price(n) 548 to 552 0x224 to x229 C5
NumberOfRepetitions INPN_NumberOfRepetitions 88 0x58 O2
Duration INPN_Duration 89 0x59 O2
Interval INPN_Interval 90 0x5a O2
Ellipsis INPN_InbandInfo_Ellipsis 1383 0x567 A2
(present in CAP V3 only)
Tone C
ToneID INPN_ToneID 64 0x40 M2
Duration INPN_Duration 89 0x59 O2
Ellipsis INPN_Tone_Ellipsis 1375 0x55f A2
(present in CAP V3 and
CAP V4 only)
DisplayInformation INPN_DisplayInformation 91 0x5b C
(absent in CAP V3 and
CAP V4)
InfoToSend_Ellipsis INPN_InfoToSend_Ellipsis 634 0x27a C
(absent in CAP V3 and
CAP V4)

100
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.5.20 ActivateServiceFiltering
INOP_ActivateServiceFiltering
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
FilteredCallTreatment M
SFBillingCharging INPN_SFBillingCharging 92 0x5c M2
Characteristics Characteristics
InformationToSend O2
See InformationToSend (Sub-table) on page 100.
MaximumNumberOf Counters INPN_MaximumNumberOf Counters 93 0x5d O2
ReleaseCause INPN_ReleaseCause 96 0x60 O2
FilteringCharacteristics M
Interval INPN_Interval 90 0x5a C2
NumberOfCalls INPN_NumberOfCalls 97 0x61 C2
FilteringTimeout M
Filtering Duration INPN_Filtering_Duration 98 0x62 C2
StopTime INPN_StopTime 100 0x64 C2
FilteringCriteria M
ServiceKey INPN_ServiceKey 3 0x3 C2
AddressAndService C2
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3
ServiceKey INPN_ServiceKey 3 0x3 M3
CallingAddressValue INPN_CallingAddressValue 99 0x63 O3
LocationNumber INPN_LocationNumber 13 0xd O3
StartTime O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.5.21 ServiceFilteringResponse
INOP_ServiceFilteringResponse
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CountersValue (SEQUENCE, size = 1 to 100) M
CounterID INPN_CounterID 328 0x148 M2
to to
427 0x1ab

101
5 Non-Primitive Interface

INOP_ServiceFilteringResponse
Parameter Mnemonic Value
dec hex
CounterValue INPN_CounterValue 428 0x1ac M2
to to
527 0x20f
FilteringCriteria M
ServiceKey INPN_ServiceKey 3 0x3 C2
AddressAndService C2
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3
ServiceKey INPN_ServiceKey 3 0x3 M3
CallingAddressValue INPN_CallingAddressValue 99 0x63 O3
LocationNumber INPN_LocationNumber 13 0xd O3
Ellipsis INPN_Ellipsis 112 0x70 A

B.5.22 CallInformationReport
INOP_CallInformationReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
RequestedInformationReport (SEQUENCE, size = 1 to 5) M
RequestedInformationType INPN_RequestedInformationType 288 0x120 M2
to to
292 0x124
RequestedInformationValue M2
CallAttemptEllapsedTimeValue INPN_CallAttemptEllapsedTimeValue(n) 293 0x125 C3
to to
297 0x129
CallStopTimeValue INPN_CallStopTimeValue(n) 298 0x12a C3
to to
302 0x12e
CallConnectedElapsedTimeValue INPN_CallConnectedElapsedTimeValue(n) 303 0x12f to C3
to 0x133
307
CalledAddressValue INPN_CalledAddressValue(n) 308 0x134 C3
to to
312 0x138
ReleaseCauseValue INPN_ReleaseCauseValue(in 313 0x139 C3
to to
317 0x13d
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

102
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.5.23 CallInformationRequest
INOP_CallInformationReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
RequestedInformationReport (SEQUENCE, size = 1 to 5) M
RequestedInformationType INPN_RequestedInformationType 288 0x120 M2
to to
292 0x124
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.5.24 SendChargingInformation
INOP_SendChargingInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
SCIBillingCharging INPN_SCIBillingCharging 87 0x57 M
Characteristics Characteristics
LegID M
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.5.25 PlayAnnouncement
INOP_PlayAnnouncement
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
InformationToSend O
InformationToSend M2
See InformationToSend (Sub-table) on page 100.
DisconnectFromIP Forbidden INPN_DisconnectFromIP Forbidden 59 0x3b D
Default = True
RequestAnnouncement Complete INPN_RequestAnnouncement Complete 60 0x3c D
Default = True
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

103
5 Non-Primitive Interface

B.5.26 PromptAndCollectUserInformation
INOP_ PromptAndCollectUserInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CollectedInfo M
CollectedDigits M2
MinimumNumberOfDigits INPN_MinimumNumberOfDigits 74 0x3b D3
Default = 1
MaximumNumberOf Digits INPN_MaximumNumberOf Digits 75 0x3c M3
EndOfReplyDigit INPN_EndOfReplyDigit 76 0x3d O3
CancelDigit INPN_CancelDigit 77 0x3e O3
StartDigit INPN_StartDigit 78 0x3f O3
FirstDigitTimeOut INPN_FirstDigitTimeOut 79 0x40 O3
InterDigitTimeOut INPN_InterDigitTimeOut 80 0x41 O3
Errortreatment INPN_Errortreatment 81 0x42 D3
Default = StfErrorAndInfo
InterDigitTimeOut INPN_InterDigitTimeOut 82 0x43 D3
Default = True
InterruptableAndInd INPN_InterruptableAnnInd 83 0x44 D3
Default = False
VoiceBack INPN_VoiceBack 84 0x45 D3
Default = False
DisconnectFromIP Forbidden INPN_DisconnectFromIP Forbidden 59 0x3b D
Default = True
InformationToSend M2
See InformationToSend (Sub-table) on page 100.
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.5.27 SpecializedResourceReport
INOP_ SpecializedResourceReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
LinkedID INPN_LinkedID 2 0x2 O

104
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.5.28 Cancel
INOP_Cancel
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Cancel_InvokeID INPN_Cancel_InvokeID 86 0x56 O

If the parameter IPN_Cancel_InvokeID is not set, then the operation will be

sent with the null parameter ‘All Requests’ indicating all operations on that
dialogue should be cancelled.

B.5.29 ActivityTest
INOP_ ActivityTest
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

105
5 Non-Primitive Interface

B.6 ITU-T CS-1 Operation Definitions

B.6.1 InitialDP
INOP_InitialDP
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ServiceKey INPN_ServiceKey 3 0x3 O
DialledDigits INPN_DialledDigits 4 0x4 O
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O
CallingPartyBuisness GroupID INPN_CallingPartyBuisness GroupID 7 0x7 O
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O
CallingPartySubaddress INPN_CallingPartySubaddress 9 0x9 O
CGEncountered INPN_cGEncountered 10 0xa O
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O
IPAvailable INPN_IPAvailable 12 0xc O
LocationNumber INPN_LocationNumber 13 0xd O
MiscCallInfo O
MessageType INPN_MessageType 56 0x38 M2
dpAssignment INPN_DPAssignment 14 0xe O2
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O
ServiceProfileIdentifier INPN_ServiceProfileIdentifier 16 0x10 O
TerminalType INPN_TerminalType 17 0x12 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
TriggerType INPN_TriggerType 18 0x13 O
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x14 O
ServiceInteractionIndicators INPN_ServiceInteractionIndicators 20 0x15 O
AdditionalCallingParty Number INPN_AdditionalCallingParty Number 21 0x16 O
ForwardCallIndicators INPN_ForwardCallIndicators 22 0x17 O
BearerCapability O
BearerCapability INPN_BearerCapability 23 0x2a C2
Tmr INPN_Tmr 104 0x68 C2
BearerCapEllipsis INPN_BearerCap_Ellipsis 119 0x77 C2
EventTypeBCSM INPN_EventTypeBCSM(0) 192 0xc0 O
RedirectingPartyID INPN_RedirectingPartyID 25 0x2a O
RedirectionInformation INPN_RedirectionInformation 26 0x2b O

106
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_InitialDP
Parameter Mnemonic Value
dec hex
Ellipsis INPN_Ellipsis 112 0x70 A

B.6.2 AssistRequestInstructions
INOP_AssistRequestInstructions
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CorrelationID INPN_CorrelationID 31 0x1f M
IPAvailable INPN_IPAvailable 12 0xc O
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.6.3 EstablishTemporaryConnection
INOP_EstablishTemporaryConnection
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
AssistingSSPIPRouting INPN_AssistingSSPIPRouting Address 102 0x1 M
Address
LegID O2
SendingSideID INPN_SendingSideID(n) 224 0xe0 C3
to to 0xef
239
ReceivingSideID INPN_ReceivingSideID(n) 240 0xf0 C3
to to 0xff
255
CorrelationID INPN_CorrelationID 31 0x1f O
ScfID INPN_ScfID 38 0x26 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O
Ellipsis INPN_Ellipsis 112 0x70 A

107
5 Non-Primitive Interface

B.6.4 DisconnectForwardConnection
INOP_DisconnectForwardConnection
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

B.6.5 ConnectToResource
INOP_ConnectToResource
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ResourceAddress M
IPRoutingAddress INPN_IPRoutingAddress 31 0x1f C2
LegID O2
SendingSideID INPN_SendingSideID(n) 224 to 0xe0 to C3
239 0xef
ReceivingSideID INPN_ReceivingSideID(n) 240 to 0xf0 to C3
255 0xff
Both O2
IPRoutingAddress INPN_IPRoutingAddress 31 0x1f M3
LegID M3
SendingSideID INPN_SendingSideID(n) 224 to 0xe0 to O3
239 0xef
ReceivingSideID INPN_ReceivingSideID(n) 240 to 0xf0 to O3
255 0xff
Null n/a C2
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x15 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

If no IPRouting address is supplied a null resource address will be formatted.

If both IPRouting address and LegID are supplied, the message will be
appropriately formatted to handle the ‘both’ choice.

B.6.6 Connect
INOP_Connect
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

108
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_Connect
Parameter Mnemonic Value
dec hex
DestinationRouting Address INPN_DestinationRouting Address(n) 27 to 0x1b M
(n = 0 to 2) 29 to
0x1d
AlertingPattern INPN_AlertingPattern 30 0x1e O
CorrelationID INPN_CorrelationID 31 0x1f O
CutAndPaste INPN_CutAndPaste 32 0x20 O
ForwardingCondition INPN_ForwardingCondition 33 0x21 O
ISDNAccessRelated INPN_ISDNAccessRelated Information 34 0x22 O
Information
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O
RouteList INPN_RouteList(n) 35 to 0x23 O
(n = 0 to 2) 37 to
0x25
ScfID INPN_ScfID 38 0x26 O
TravellingClassMark INPN_TravellingClassMark 39 0x27 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Carrier INPN_Carrier 40 0x28 O
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x15 O
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O
RedirectionInformation INPN_RedirectionInformation 26 0x1a O
Ellipsis INPN_Ellipsis 112 0x70 A

B.6.7 ReleaseCall
INOP_ReleaseCall
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Cause INPN_Cause 41 0x29 O

B.6.8 RequestReportBCSMEvent
INOP_RequestReportBCSMEvent
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
BCSMEvents (SEQUENCE, size = 0 to 15) M

109
5 Non-Primitive Interface

INOP_RequestReportBCSMEvent
Parameter Mnemonic Value
dec hex
EventTypeBCSM INPN_EventTypeBCSM(n) 192 to 207 0xc0 to 0xcf M2
MonitorMode INPN_MonitorMode(n) 208 to 223 0xd0 to 0xdf M2
LegID O2
SendingSideID INPN_SendingSideID(n) 224 to 239 0xe0 to 0xef C3
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0 to 0xff C3
DPSpecificCriteria O2
NumberOfDigits INPN_NumberOfDigits(n) 160 to 175 0xa0 to 0xaf C3
ApplicationTimer INPN_ApplicationTimer(n) 176 to 191 0xb0 to 0xbf C3
BCSMEventCorrelationID INPN_BCSMEventCorrelationID 24 0x18 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

The BCSMEvent structure can be repeated up to sixteen times for each

operation. Replace ‘n’ with the position in the sequence of BCSMEvents
starting from 0. The LegID for each event may be specified as either a
SendingSideID or a ReceivingSideID. For some events, the LegID parameter
is mandatory; for example, events O-MidCall, O-Disconnect, T-MidCall and T-
Disconnect in ETSI 300 374-1 must have this parameter present. For other
events, the legID may take default values. Similarly, the DPSpecificCriteria
for each event may be specified as either NumberOfDigits or
ApplicationTimer.

B.6.9 EventReportBCSM
INOP_EventReportBCSM
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
EventTypeBCSM INPN_EventTypeBCSM(0) 192 0xc0 M
CorrelationID INPN_CorrelationID 31 0x1f O
EventSpecificInformationBCSM O
CollectedInfo C2
CalledPartyNumber INPN_CalledPartyNumber 5 0x05 M3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
AnalyzedInformation C2
CalledPartyNumber INPN_CalledPartyNumber 5 0x05 M3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
RouteSelectFailure C2
FailureCause INPN_FailureCause 94 0x5e O3

110
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_EventReportBCSM
Parameter Mnemonic Value
dec hex
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
OcalledPartyBusy C2
BusyCause INPN_BusyCause 95 0x5f O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
OnoAnswer C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Oanswer C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
OmidCall C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Odisconnect C2
ReleaseCause INPN_ReleaseCause 96 0x60 O
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
TcalledPartyBusy C2
BusyCause INPN_BusyCause 95 0x5f O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
TnoAnswer C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Tanswer C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
TmidCall C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Tdisconnect C2
ReleaseCause INPN_ReleaseCause 96 0x60 O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
LegID O
SendingSideID INPN_SendingSideID(n) 224 to 239 0xe0 to 0xef C2
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0 to 0xff C2
MiscCallInfo O

111
5 Non-Primitive Interface

INOP_EventReportBCSM
Parameter Mnemonic Value
dec hex
MessageType INPN_MessageType 56 0x38 D2
Default = request(0)
DPAssignment INPN_DPAssignment 14 0xe O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

The event specific information formatted is dependent on the value of

INPN_EventTypeBCSM(0). For example, if its value is collectedInfo (2), then
the format procedures will expect INPN_CalledPartyNumber to be present.

B.6.10 RequestNotificationChargingEvent
INOP_RequestNotificationChargingEvent
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ChargingEvent (SEQUENCE, size = 1 to 16) M
EventTypeCharging INPN_EventTypeCharging(n) 272 to 287 0x110 to 0x11f M2
MonitorMode INPN_MonitorMode(n) 208 to 223 0xd0 to 0xdf M2
LegID O2
SendingSideID INPN_SendingSideID(n) 224 to 239 0xe0 to 0xef C3
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0 to 0xff C3
Ellipsis INPN_Ellipsis 112 0x70 A

B.6.11 EventNotificationCharging
INOP_EventNotificationCharging
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
EventTypeCharging INPN_EventTypeCharging(0) 272 0x110 M
EventSpecificInformationCharging INPN_EventSpecificInformationCharging 58 0x3a O
LegID O
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
MonitorMode INPN_MonitorMode(0) 208 0xd0 M
Ellipsis INPN_Ellipsis 112 0x70 A

112
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.6.12 CollectInformation
INOP_CollectInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
AlertingPattern INPN_AlertingPattern 30 0x1e O
NumberingPlan INPN_NumberingPlan 107 0x6b O
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O
TravellingClassMark INPN_TravellingClassMark 39 0x27 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O
DialledDigits INPN_DialledDigits 4 0x4 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.6.13 Continue
INOP_Continue
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

B.6.14 InitiateCallAttempt
INOP_InitiateCallAttempt
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
DestinationRouting Address INPN_DestinationRouting Address(n) 27 0x1b M
(n = 0)
AlertingPattern INPN_AlertingPattern 30 0x1e O
ISDNAccessRelated INPN_ISDNAccessRelated Information 34 0x22 O
Information
TravellingClassMark INPN_TravellingClassMark 39 0x27 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x15 O
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O
Ellipsis INPN_Ellipsis 112 0x70 A

113
5 Non-Primitive Interface

B.6.15 ResetTimer
INOP_ResetTimer
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
TimerID INPN_TimerID 61 0x3d M
TimerValue INPN_TimerValue 62 0x3e M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.6.16 FurnishChargingInformation
INOP_FurnishChargingInformation
Parameter Mnemonic Value
dec hex
InvokeId INPN_InvokeId 1 0x1 M
FurnishCharging Information INPN_FCIBillingChargingCharacteristics 34 0x22 M

B.6.17 ApplyCharging
INOP_ApplyCharging
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
AchBillingCharging Characteristics INPN_AchBillingCharging Characteristics 52 0x34 M
PartyToCharge O
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.6.18 ApplyChargingReport
INOP_ApplyChargingReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CallResult INPN_CallResult 55 0x37 M

114
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.6.19 CallGap
INOP_CallGap
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
GapCriteria M
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 C2
GapOnService C2
ServiceKey INPN_ServiceKey 3 0x3 M3
CalledAddressAndService C2
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3
ServiceKey INPN_ServiceKey 3 0x3 M3
CallingAddressAndService C2
CallingAddressValue INPN_CallingAddressValue 99 0x63 M3
ServiceKey INPN_ServiceKey 3 0x3 M3
LocationNumber INPN_LocationNumber 13 0xd O3
GapIndicators M
Gap Duration INPN_Gap_Duration 72 0x48 M2
GapInterval INPN_GapInterval 73 0x49 M2
ControlType INPN_ControlType 101 0x65 O
GapTreatment O
InformationToSend C2
See InformationToSend (Sub-table) on page 100
ReleaseCause INPN_ReleaseCause 96 0x60 C2
Both C2
InformationToSend M3
See InformationToSend (Sub-table) on page 100
ReleaseCause INPN_ReleaseCause 96 0x60 M3
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

115
5 Non-Primitive Interface

B.6.20 ActivateServiceFiltering
INOP_ActivateServiceFiltering
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
FilteredCallTreatment M
SFBillingCharging Characteristics INPN_SFBillingCharging Characteristics 92 0x5c M2
InformationToSend O2
See InformationToSend (Sub-table) on page 100

MaximumNumberOf Counters INPN_MaximumNumberOf Counters 93 0x5d O2

ReleaseCause INPN_ReleaseCause 96 0x60 O2
FilteringCharacteristics M
Interval INPN_Interval 90 0x5a C2
NumberOfCalls INPN_NumberOfCalls 97 0x61 C2
FilteringTimeout M
Filtering Duration INPN_Filtering_Duration 98 0x62 C2
StopTime INPN_StopTime 100 0x64 C2
FilteringCriteria M
ServiceKey INPN_ServiceKey 3 0x3 C2
AddressAndService C2
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3
ServiceKey INPN_ServiceKey 3 0x3 M3
CallingAddressValue INPN_CallingAddressValue 99 0x63 O3
LocationNumber INPN_LocationNumber 13 0xd O3
StartTime O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

116
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.6.21 ServiceFilteringResponse
INOP_ServiceFilteringResponse
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CountersValue (SEQUENCE, size = 1 to 100) M
CounterID INPN_CounterID 328 to 427 0x148 to 0x1ab M2
CounterValue INPN_CounterValue 428 to 527 0x1ac to 0x20f M2
FilteringCriteria M
ServiceKey INPN_ServiceKey 3 0x3 C2
AddressAndService C2
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3
ServiceKey INPN_ServiceKey 3 0x3 M3
CallingAddressValue INPN_CallingAddressValue 99 0x63 O3
LocationNumber INPN_LocationNumber 13 0xd O3
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ResponseCondition INPN_ResponseCondition 105 0x69 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.6.22 CallInformationReport
INOP_CallInformationReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
RequestedInformationReport (SEQUENCE, size = 1 to 5) M
RequestedInformationType INPN_RequestedInformationType 288 to 0x120 to M2
292 0x124
RequestedInformationValue M2
CallAttemptEllapsed TimeValue INPN_CallAttemptEllapsedTime Value(n) 293 to 0x125 to C3
297 0x129
CallStopTimeValue INPN_CallStopTimeValue(n) 298 to 0x12a to C3
302 0x12e
CallConnectedElapsedTimeValue INPN_CallConnectedElapsedTimeValue(n) 303 to 0x12f to C3
307 0x133
CalledAddressValue INPN_CalledAddressValue(n) 308 to 0x134 to C3
312 0x138
ReleaseCauseValue INPN_ReleaseCauseValue(in 313 to 0x139 to C3
317 0x13d
CorrelationID INPN_CorrelationID 31 0x1f O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

117
5 Non-Primitive Interface

B.6.23 CallInformationRequest
INOP_CallInformationReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
RequestedInformationReport (SEQUENCE, size = 1 to 5) M
RequestedInformationType INPN_RequestedInformationType 288 to 0x120 to M2
292 0x124
CorrelationID INPN_CorrelationID 31 0x1f O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.6.24 SendChargingInformation
INOP_SendChargingInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
SCIBillingCharging Characteristics INPN_SCIBillingCharging Characteristics 87 0x57 M
LegID M
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.6.25 PlayAnnouncement
INOP_PlayAnnouncement
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
InformationToSend O
See InformationToSend (Sub-table) on page 100 M2
DisconnectFromIP INPN_DisconnectFromIP Forbidden 59 0x3b D
Forbidden
Default = True
RequestAnnouncement INPN_RequestAnnouncement Complete 60 0x3c D
Complete
Default = True
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

118
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.6.26 PromptAndCollectUserInformation
INOP_ PromptAndCollectUserInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CollectedInfo M
CollectedDigits M2
MinimumNumberOfDigits INPN_MinimumNumberOfDigits 74 0x4a D3
Default = 1
MaximumNumberOfDigits INPN_MaximumNumberOfDigits 75 0x4b M3
EndOfReplyDigit INPN_EndOfReplyDigit 76 0x4c O3
CancelDigit INPN_CancelDigit 77 0x4d O3
StartDigit INPN_StartDigit 78 0x4e O3
FirstDigitTimeOut INPN_FirstDigitTimeOut 79 0x4f O3
InterDigitTimeOut INPN_InterDigitTimeOut 80 0x50 O3
Errortreatment INPN_Errortreatment 81 0x51 D3
Default = StfErrorAndInfo
InterDigitTimeOut INPN_InterDigitTimeOut 82 0x52 D3
Default = True
InterruptableAndInd INPN_InterruptableAnnInd 83 0x53 D3
Default = False
VoiceBack INPN_VoiceBack 84 0x54 D3
Default = False
DisconnectFromIP Forbidden INPN_DisconnectFromIP Forbidden 59 0x55 D
Default = True
InformationToSend O
InformationToSend (Sub-table) on page 100 M2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.6.27 SpecializedResourceReport
INOP_ SpecializedResourceReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
LinkedID INPN_LinkedID 2 0x2 O

119
5 Non-Primitive Interface

B.6.28 Cancel
INOP_Cancel
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Cancel_InvokeID INPN_Cancel_InvokeID 86 0x56 O

If the parameter INPN_Cancel_InvokeID is not set, then the operation will be

sent with the null parameter ‘All Requests’ indicating all operations on that
dialogue should be cancelled.

B.6.29 ActivityTest
INOP_ ActivityTest
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

120
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.7 CAMEL v1 Operation Definitions

B.7.1 InitialDP
INOP_InitialDP
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ServiceKey INPN_ServiceKey 3 0x3 M
DialledDigits INPN_DialledDigits 4 0x4 O
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O
CallingPartyBuisness GroupID INPN_CallingPartyBuisness GroupID 7 0x7 O
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O
CallingPartySubaddress INPN_CallingPartySubaddress 9 0x9 O
CGEncountered INPN_cGEncountered 10 0xa O
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O
IPAvailable INPN_IPAvailable 12 0xc O
LocationNumber INPN_LocationNumber 13 0xd O
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ServiceProfileIdentifier INPN_ServiceProfileIdentifier 16 0x10 O
TerminalType INPN_TerminalType 17 0x11 O
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x13 O
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O
AdditionalCallingParty Number INPN_AdditionalCallingParty Number 21 0x15 O
ForwardCallIndicators INPN_ForwardCallIndicators 22 0x16 O
BearerCapability INPN_BearerCapability 23 0x17 O
EventTypeBCSM INPN_EventTypeBCSM(0) 192 0xc0 O
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O
RedirectionInformation INPN_RedirectionInformation 26 0x20 O
IMSI INPN_IMSI 130 0x81 O
SubscriberState O
AssumedIdle INPN_AssumedIdle 134 0x85 C2
CamelBusy INPN_CamelBusy 135 0x86 C2
NetDetNotReachable INPN_NetDetNotReachable 136 0x88 C2
NotProvidedFromVLR INPN_NotProvidedFromVLR 137 0x89 C2
LocationInfo O

121
5 Non-Primitive Interface

INOP_InitialDP
Parameter Mnemonic Value
dec hex
AgeOfLocation Information INPN_AgeOfLocation Information 124 0x7c O2
GeographicalInformation INPN_GeographicalInformation 125 0x7d O2
Vlr_Number INPN_Vlr_Number 126 0x7e O2
LocationNumber INPN_LI_LocationNumber 127 0x7f O2
CellIdOrLAIb O2
CellIdFixedLength INPN_CellIdFixedLength 122 0x7a C3
LAIFixedLength INPN_LAIFixedLength 123 0x7b C3
ExtensionContainer INPN_ExtensionContainer 128 0x80 O2
LocationInfo Ellipsis INPN_LocationInfo_Ellipsis 114 0x72 O2
Ext_BasicSrvCode O
BearerServiceCode INPN_Ext_BearerServiceCode 120 0x78 C2
TeleserviceCode INPN_Ext_TeleserviceCode 121 0x79 C2
CallReferenceNumber INPN_CallReferenceNumber 131 0x83 O
MSCAddress INPN_MSCAddress 132 0x84 O
CalledPartyBCDNumber INPN_CalledPartyBCDNumber 129 0x81 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.7.2 Connect
INOP_Connect
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
DestinationRouting Address INPN_DestinationRouting 27 0x1b M
Address(n)
(n = 0)
AlertingPattern INPN_AlertingPattern 30 0x1e O
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Generic Numbers (SEQUENCE, size 1 to 5) O
GenericNumber INPN_GenericNumber(n) 67 to 0x43 to O
71 0x47
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O
RedirectionInformation INPN_RedirectionInformation 26 0x1a O
SuppressionOf INPN_SuppressionOf 109 0x6d O
Announcement Announcement

122
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_Connect
Parameter Mnemonic Value
dec hex
OCSIApplicable INPN_OCSIApplicable 110 0x6e O
Ellipsis INPN_Ellipsis 112 0x70 A

B.7.3 ReleaseCall
INOP_ReleaseCall
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Cause INPN_Cause 41 0x29 O

B.7.4 RequestReportBCSMEvent
INOP_RequestReportBCSMEvent
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
BCSMEvents (SEQUENCE, size = 0 to 15) M
EventTypeBCSM INPN_EventTypeBCSM(n) 192 to 207 0xc0 to 0xcf M2
MonitorMode INPN_MonitorMode(n) 208 to 223 0xd0 to 0xdf M2
LegID O2
SendingSideID INPN_SendingSideID(n) 224 to 239 0xe0 to 0xef C3
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0 to 0xff C3
DPSpecificCriteria O2
NumberOfDigits INPN_NumberOfDigits(n) 160 to 175 0xa0 to 0xaf C3
ApplicationTimer INPN_ApplicationTimer(n) 176 to 191 0xb0 to 0xbf C3
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

The BCSMEvent structure can be repeated up to sixteen times for each

operation. Replace ‘n’ with the position in the sequence of BCSMEvents
starting from 0. The LegID for each event may be specified as either a
SendingSideID or a ReceivingSideID. For some events the LegID parameter is
mandatory. For other events, the legID may take default values. Similarly,
the DPSpecificCriteria for each event may be specified as either
NumberOfDigits or ApplicationTimer.

123
5 Non-Primitive Interface

B.7.5 EventReportBCSM
INOP_EventReportBCSM
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
EventTypeBCSM INPN_EventTypeBCSM(0) 192 0xc0 M
EventSpecificInformationBCSM O
Odisconnect C2
ReleaseCause INPN_ReleaseCause 96 0x60 O
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Tdisconnect C2
ReleaseCause INPN_ReleaseCause 96 0x60 O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
LegID O
SendingSideID INPN_SendingSideID(n) 224 to 239 0xe0 to 0xef C2
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0 to 0xff C2
MiscCallInfo O
MessageType INPN_MessageType 56 0x38 D2
Default = request(0)
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

The event-specific information formatted or recovered is dependent on the

value of INPN_EventTypeBCSM(0). For example, if its value is Tdisconnect,
then the format procedures will use the parameter INPN_ReleaseCause.

B.7.6 Continue
INOP_Continue
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

B.7.7 ActivityTest
INOP_ ActivityTest
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

124
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.8 CAMEL v2 Operation Definitions

B.8.1 InitialDP
INOP_InitialDP
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ServiceKey INPN_ServiceKey 3 0x3 M
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O
CallingPartyBuisness INPN_CallingPartyBuisness 7 0x7 O
GroupID GroupID
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O
LocationNumber INPN_LocationNumber 13 0xd O
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x13 O
AdditionalCallingParty INPN_AdditionalCallingParty 21 0x15 O
Number Number
BearerCapability INPN_BearerCapability 23 0x17 O
EventTypeBCSM INPN_EventTypeBCSM(0) 192 0xc0 O
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O
RedirectionInformation INPN_RedirectionInformation 26 0x1a O
IMSI INPN_IMSI 130 0x81 O
SubscriberState O
AssumedIdle INPN_AssumedIdle 134 0x86 C2
CamelBusy INPN_CamelBusy 135 0x87 C2
NetDetNotReachable INPN_NetDetNotReachable 136 0x88 C2
NotProvidedFromVLR INPN_NotProvidedFromVLR 137 0x89 C2
LocationInfo O
AgeOfLocation Information INPN_AgeOfLocation Information 124 0x7c O2
GeographicalInformation INPN_GeographicalInformation 125 0x7d O2
Vlr_Number INPN_Vlr_Number 126 0x7e O2
LocationNumber INPN_LI_LocationNumber 127 0x7f O2
CellIdOrLAIb O2
CellIdFixedLength INPN_CellIdFixedLength 122 0x7a C3
LAIFixedLength INPN_LAIFixedLength 123 0x7b C3

125
5 Non-Primitive Interface

INOP_InitialDP
Parameter Mnemonic Value
dec hex
ExtensionContainer INPN_ExtensionContainer 128 0x80 O2
LocationInfo Ellipsis INPN_LocationInfo_Ellipsis 114 0x72 O2
Ext_BasicSrvCode O
BearerServiceCode INPN_Ext_BearerServiceCode 120 0x78 C2
TeleserviceCode INPN_Ext_TeleserviceCode 121 0x79 C2
CallReferenceNumber INPN_CallReferenceNumber 131 0x83 O
MSCAddress INPN_MSCAddress 132 0x84 O
CalledPartyBCDNumber INPN_CalledPartyBCDNumber 129 0x81 O
TimeAndTimezone INPN_TimeAndTimezone 703 0x2bf O
GSM_Forwarding Pending INPN_GSM_ForwardingPending 133 0x85 O
IDPArgExtension O
NACarrierInfo O2
NACarrierID INPN_NACarrierID 140 0x8c O3
NACICSelectionType INPN_NACICSelectionType 139 0x8b O3
NACarrierInfo_Ellipsis INPN_NACarrierInfo_Ellipsis 116 0x74 O3
NAOliInfo INPN_NAOliInfo 141 0x8d O2
NAChargeNumber INPN_NAChargeNumber 142 0x8e O2
InitialDPArgExt_Ellipsis INPN_InitialDPArgExt_Ellipsis 117 0x75 O2
Ellipsis INPN_Ellipsis 112 0x70 A

B.8.2 AssistRequestInstructions
INOP_AssistRequestInstructions
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CorrelationID INPN_CorrelationID 31 0x1f M
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

126
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.8.3 EstablishTemporaryConnection
INOP_EstablishTemporaryConnection
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
AssistingSSPIPRouting Address INPN_AssistingSSPIPRouting Address 102 0x1 M
CorrelationID INPN_CorrelationID 31 0x1f O
ScfID INPN_ScfID 38 0x26 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ServiceInteractionIndicatorsTwo O
BothwayThrough ConnectionIndicator INPN_BothwayThrough 111 0x6f O2
ConnectionIndicator
Ellipsis INPN_Ellipsis 112 0x70 A

B.8.4 DisconnectForwardConnection
INOP_DisconnectForwardConnection
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

B.8.5 ConnectToResource
INOP_ConnectToResource
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ResourceAddress M
IPRoutingAddress INPN_IPRoutingAddress 31 0x1f C2
Null n/a C2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ServiceInteractionIndicatorsTwo O
BothwayThrough INPN_BothwayThrough 111 0x6f O2
ConnectionIndicator ConnectionIndicator
Ellipsis INPN_Ellipsis 112 0x70 A

127
5 Non-Primitive Interface

B.8.6 Connect
INOP_Connect
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
DestinationRouting Address INPN_DestinationRouting Address(n) 27 0x1b M
(n = 0)
AlertingPattern INPN_AlertingPattern 30 0x1e O
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O
RedirectionInformation INPN_RedirectionInformation 26 0x1a O
Generic Numbers (SEQUENCE, size 1 to 5) O
GenericNumber INPN_GenericNumber(n) 67 to 0x43 O
71 to
0x47
SuppressionOf Announcement INPN_SuppressionOf Announcement 109 0x6d O
OCSIApplicable INPN_OCSIApplicable 110 0x6e O
Ellipsis INPN_Ellipsis 112 0x70 A
NA-Info O
NACarrierInfo O2
NACarrierID INPN_NACarrierID 140 0x8c O3
NACICSelectionType INPN_NACICSelectionType 139 0x8b O3
NACarrierInfo_Ellipsis INPN_NACarrierInfo_Ellipsis 116 0x74 O3
NAOliInfo INPN_NAOliInfo 141 0x8d O2
NAChargeNumber INPN_NAChargeNumber 142 0x8e O2
NAInfo_Ellipsis INPN_NAInfo_Ellipsis 115 0x73 O2

B.8.7 ReleaseCall
INOP_ReleaseCall
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Cause INPN_Cause 41 0x29 O

128
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.8.8 RequestReportBCSMEvent
INOP_RequestReportBCSMEvent
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
BCSMEvents (SEQUENCE, size = 1 to 16) M
EventTypeBCSM INPN_EventTypeBCSM(n) 192 to 207 0xc0 to 0xcf M2
MonitorMode INPN_MonitorMode(n) 208 to 223 0xd0 to 0xdf M2
LegID O2
SendingSideID INPN_SendingSideID(n) 224 to 239 0xe0 to 0xef C3
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0 to 0xff C3
DPSpecificCriteria O2
NumberOfDigits INPN_NumberOfDigits(n) 160 to 175 0xa0 to 0xaf C3
ApplicationTimer INPN_ApplicationTimer(n) 176 to 191 0xb0 to 0xbf C3
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

The BCSMEvent structure can be repeated up to sixteen times for each

operation. Replace ‘n’ with the position in the sequence of BCSMEvents
starting from 0. The LegID for each event may be specified as either a
SendingSideID or a ReceivingSideID. For some events, the LegID parameter
is mandatory; for example, events O-MidCall, O-Disconnect, T-MidCall and T-
Disconnect in CAMEL CAP v2 must have this parameter present. For other
events, the legID may take default values. Similarly, the DPSpecificCriteria
for each event may be specified as either NumberOfDigits or
ApplicationTimer.

B.8.9 EventReportBCSM
INOP_EventReportBCSM
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
EventTypeBCSM INPN_EventTypeBCSM(0) 192 0xc0 M
EventSpecificInformationBCSM O
RouteSelectFailure C2
FailureCause INPN_FailureCause 94 0x5e O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
OcalledPartyBusy C2
BusyCause INPN_BusyCause 95 0x5f O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
OnoAnswer C2

129
5 Non-Primitive Interface

INOP_EventReportBCSM
Parameter Mnemonic Value
dec hex
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Oanswer C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Odisconnect C2
ReleaseCause INPN_ReleaseCause 96 0x60 O
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
TcalledPartyBusy C2
BusyCause INPN_BusyCause 95 0x5f O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
TnoAnswer C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Tanswer C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Tdisconnect C2
ReleaseCause INPN_ReleaseCause 96 0x60 O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
LegID O
SendingSideID INPN_SendingSideID(n) 224 to 239 0xe0 to 0xef C2
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0 to 0xff C2
MiscCallInfo O
MessageType INPN_MessageType 56 0x38 D2
Default = request(0)
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

The event-specific information formatted or recovered is dependent on the

value of INPN_EventTypeBCSM(0). For example, if its value is Tdisconnect,
then the format procedures will use the parameter INPN_ReleaseCause.

130
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.8.10 Continue
INOP_Continue
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

B.8.11 ResetTimer
INOP_ResetTimer
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
TimerID INPN_TimerID 61 0x3d M
TimerValue INPN_TimerValue 62 0x3e M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.8.12 FurnishChargingInformation
INOP_FurnishChargingInformation
Parameter Mnemonic Value
dec hex
InvokeId INPN_InvokeId 1 0x1 M
FCIBCCCAMELsequence1 M
FreeFormatData INPN_FreeFormData 319 0x13f M2
PartyToCharge O2
SendingSideID INPN_SendingSideID(0) 224 0xe0 C3
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C3
AppendFreeFormatData INPN_AppendFreeFormData 637 0x27d O2

B.8.13 ApplyCharging
INOP_ApplyCharging
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
AchBillingCharging Characteristics M
TimeDurationCharging M2
MaxCallPeriodDuration INPN_MaxCallPeriodDuration 159 0x9f M3
ReleaseIfDurationExceeded O3

131
5 Non-Primitive Interface

INOP_ApplyCharging
Parameter Mnemonic Value
dec hex
Tone INPN_Tone 778 0x30a D4
Default = False
Ellipsis INPN_RelIfDurEx_Ellipsis 4179 0x1053 A4
Extensions (see Appendix B.15 Operation Extensions on page 282) O4
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O3
PartyToCharge O
SendingSideID INPN_SendingSideID(0) 224 0xe0 O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.8.14 ApplyChargingReport
INOP_ApplyChargingReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CallResult INPN_CallResult 55 0x37 M

B.8.15 CallInformationReport
INOP_CallInformationReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
RequestedInformationReport (SEQUENCE, size = 1 to 5) M
RequestedInformationType INPN_RequestedInformationType 288 to 0x120 to M2
292 0x124
RequestedInformationValue M2
CallAttemptEllapsedTimeValue INPN_CallAttemptEllapsedTimeValue(n) 293 to 0x125 to C3
297 0x129
CallStopTimeValue INPN_CallStopTimeValue(n) 298 to 0x12a to C3
302 0x12e
CallConnectedElapsedTimeValue INPN_CallConnectedElapsedTimeValue(n) 303 to 0x12f to C3
307 0x133
ReleaseCauseValue INPN_ReleaseCauseValue(in 313 to 0x139 to C3
317 0x13d
Extensions (see Appendix B.15 Operation Extensions on page 282) O
LegID O

132
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_CallInformationReport
Parameter Mnemonic Value
dec hex
SendingSideID INPN_SendingSideID(n) 224 0xe0 to C2
to 239 0xef
ReceivingSideID INPN_ReceivingSideID(n) 240 to 0xf0 to C2
255 0xff
Ellipsis INPN_Ellipsis 112 0x70 A

B.8.16 CallInformationRequest
INOP_CallInformationReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
RequestedInformationReport (SEQUENCE, size = 1 to 5) M
RequestedInformation Type INPN_RequestedInformation Type 288 to 292 0x120 to 0x124 M2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
LegID O
SendingSideID INPN_SendingSideID(n) 224 to 239 0xe0 to 0xef C2
Ellipsis INPN_Ellipsis 112 0x70 A

B.8.17 SendChargingInformation
INOP_SendChargingInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CAMEL SCIBillingCharging Characteristics M
AOC BeforeAnswer C2
CAMEL AOC BeforeAnswer INPN_CAMEL_AOC_ BeforeAnswer 143 0x8f Note6
InitialCAI M3
Initial CAI E1 INPN_Initial_CAI_E1 144 0x90 O4
Initial CAI E2 INPN_Initial_CAI_E2 145 0x91 O4
Initial CAI E3 INPN_Initial_CAI_E3 146 0x92 O4
Initial CAI E4 INPN_Initial_CAI_E4 147 0x93 O4
Initial CAI E5 INPN_Initial_CAI_E5 148 0x94 O4
Initial CAI E6 INPN_Initial_CAI_E6 149 0x95 O4

6
INPN_CAMEL_AOC_BeforeAnswer will not be formatted or decoded. It is used to determine if the AOC is for before or after
answer. If present, AOCBeforeAnswer will be sent, otherwise AOCAfterAnswer will be sent. The data stored in the
INPN_CAMEL_AOC_BeforeAnswer may be of any value.
133
5 Non-Primitive Interface

INOP_SendChargingInformation
Parameter Mnemonic Value
dec hex
Initial CAI E7 INPN_Initial_CAI_E7 150 0x96 O4
AOC Subsequent O3
Subsequent CAI E1 INPN_Subsequent_CAI_E1 151 0x97 O4
Subsequent CAI E2 INPN_Subsequent_CAI_E2 152 0x98 O4
Subsequent CAI E3 INPN_Subsequent_CAI_E3 153 0x99 O4
Subsequent CAI E4 INPN_Subsequent_CAI_E4 154 0x9a O4
Subsequent CAI E5 INPN_Subsequent_CAI_E5 155 0x9b O4
Subsequent CAI E6 INPN_Subsequent_CAI_E6 156 0x9c O4
Subsequent CAI E7 INPN_Subsequent_CAI_E7 157 0x9d O4
AOC Subsequent C2
Subsequent CAI E1 INPN_Subsequent_CAI_E1 151 0x97 O3
Subsequent CAI E2 INPN_Subsequent_CAI_E2 152 0x98 O3
Subsequent CAI E3 INPN_Subsequent_CAI_E3 153 0x99 O3
Subsequent CAI E4 INPN_Subsequent_CAI_E4 154 0x9a O3
Subsequent CAI E5 INPN_Subsequent_CAI_E5 155 0x9b O3
Subsequent CAI E6 INPN_Subsequent_CAI_E6 156 0x9c O3
Subsequent CAI E7 INPN_Subsequent_CAI_E7 157 0x9d O3
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O2
SendingSideID M
SendingSideID INPN_SendingSideID(0) 224 0xe0 M
Extensions O
Ellipsis INPN_Ellipsis 112 0x70 A

B.8.18 PlayAnnouncement
INOP_PlayAnnouncement
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
InformationToSend O
See InformationToSend (Sub-table) on page 100 M2
DisconnectFromIP Forbidden INPN_DisconnectFromIP Forbidden 59 0x3b D
Default = True
RequestAnnouncement Complete INPN_RequestAnnouncement Complete 60 0x3c D
Default = True

134
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_PlayAnnouncement
Parameter Mnemonic Value
dec hex
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.8.19 PromptAndCollectUserInformation
INOP_ PromptAndCollectUserInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CollectedInfo M
CollectedDigits M2
MinimumNumberOfDigits INPN_MinimumNumberOfDigits 74 0x3b D3
Default = 1
MaximumNumberOf Digits INPN_MaximumNumberOf Digits 75 0x3c M3
EndOfReplyDigit INPN_EndOfReplyDigit 76 0x3d O3
CancelDigit INPN_CancelDigit 77 0x3e O3
StartDigit INPN_StartDigit 78 0x3f O3
FirstDigitTimeOut INPN_FirstDigitTimeOut 79 0x40 O3
InterDigitTimeOut INPN_InterDigitTimeOut 80 0x41 O3
Errortreatment INPN_Errortreatment 81 0x42 D3
Default = StfErrorAndInfo
InterDigitTimeOut INPN_InterDigitTimeOut 82 0x43 D3
Default = True
InterruptableAndInd INPN_InterruptableAnnInd 83 0x44 D3
Default = False
VoiceBack INPN_VoiceBack 84 0x45 D3
Default = False
DisconnectFromIP Forbidden INPN_DisconnectFromIP Forbidden 59 0x3b D
Default = True
InformationToSend O
See InformationToSend (Sub-table) on page 100 M2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

135
5 Non-Primitive Interface

B.8.20 SpecializedResourceReport
INOP_ SpecializedResourceReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
LinkedID INPN_LinkedID 2 0x2 O

B.8.21 Cancel
INOP_Cancel
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Cancel_InvokeID INPN_Cancel_InvokeID 86 0x56 O

If the parameter IPN_Cancel_InvokeID is not set, then the operation will be

sent with the null parameter ‘All Requests’ indicating all operations on that
dialogue should be cancelled.

B.8.22 ActivityTest
INOP_ ActivityTest
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

136
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.9 CAMEL v3 Operation Definitions

B.9.1 InitialDP
INOP_InitialDP
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ServiceKey INPN_ServiceKey 3 0x3 M
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O
cGEncountered INPN_cGEncountered 10 0xa O
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O
LocationNumber INPN_LocationNumber 13 0xd O
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x13 O
AdditionalCallingParty Number INPN_AdditionalCallingParty Number 21 0x15 O
BearerCapability
BearerCapability INPN_BearerCapability 23 0x17 O2
Ellipsis INPN_BearerCap_Ellipsis 119 0x77 O2
EventTypeBCSM INPN_EventTypeBCSM(0) 192 0xc0 O
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O
RedirectionInformation INPN_RedirectionInformation 26 0x1a O
Cause INPN_Cause 41 0x29 O
ServiceInteractionIndicatorsTwo O
See ServiceInteractionIndicatorsTwo (sub-table) on page 138 O2
Carrier INPN_Carrier 40 0x28 O
CUG-Index INPN_CUG_Index 644 0x284 O
CUG-Interlock INPN_CUG_Interlock 645 0x285 O
CUG-OutgoingAccess INPN_CUG_OutgoingAccess 646 0x286 O
IMSI INPN_IMSI 130 0x81 O
SubscriberState O
AssumedIdle INPN_AssumedIdle 134 0x86 C2
CamelBusy INPN_CamelBusy 135 0x87 C2
NetDetNotReachable INPN_NetDetNotReachable 136 0x88 C2
NotProvidedFromVLR INPN_NotProvidedFromVLR 137 0x89 C2

137
5 Non-Primitive Interface

INOP_InitialDP
Parameter Mnemonic Value
dec hex
LocationInformation O
See LocationInformation (sub-table) on page 139 O2
Ext_BasicSrvCode O
BearerServiceCode INPN_Ext_BearerServiceCode 120 0x78 C2
TeleserviceCode INPN_Ext_TeleserviceCode 121 0x79 C2
CallReferenceNumber INPN_CallReferenceNumber 131 0x83 O
MSCAddress INPN_MSCAddress 132 0x84 O
CalledPartyBCDNumber INPN_CalledPartyBCDNumber 129 0x81 O
TimeAndTimezone INPN_TimeAndTimezone 703 0x2bf O
GSM_Forwarding Pending INPN_GSM_ForwardingPending 133 0x85 O
IDPArgExtension O
GMSC Address INPN_GMSCAddress 653 0x28d O2
InitialDPArgExt_Ellipsis INPN_InitialDPArgExt_Ellipsis 117 0x75 O2
Ellipsis INPN_Ellipsis 112 0x70 A

ServiceInteractionIndicatorsTwo (sub-table)
ServiceInteractionIndicatorsTwo
Parameter Mnemonic Value
dec hex
ForwardServiceInteractionInd O
ConferenceTreatment INPN_Fw_Conference TreatmentInd 711 0x2c7 O2
Indicator
CallDiversionTreatment INPN_CallDiversionTreatment 712 0x2c8 O2
Indicator Ind
CallingPartyRestriction Indicator INPN_CallingPartyRestriction Ind 714 0x2ca O2
Ellipsis INPN_ForwardServIntInd_Ellipsis 1402 0x57a A2
BackwardServiceInteractionInd O
ConferenceTreatmentIndicator INPN_Bw_Conference TreatmentInd 710 0x2c6 O2
CallCompletionTreatmentIndicator INPN_CallCompletionTreatmentInd 716 0x2cc O2
Ellipsis INPN_BackwardServIntInd _Ellipsis 1403 0x57b A2
BothwayThrough ConnectionInd INPN_BothwayThrough 111 0x6f O
ConnectionIndicator
ConnectedNumber Treatment INPN_ConnectedNumber Treatment 718 0x2ce O
NonCUGCall INPN_NonCUGCall 663 0x297 O
HoldTreatmentIndicator INPN_HoldTreatmentInd 656 0x290 O
CWTreatmentIndicator INPN_CWTreatmentInd 647 0x287 O

138
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

ServiceInteractionIndicatorsTwo
Parameter Mnemonic Value
dec hex
ECTTreatmentindicator INPN_ECTTreatmentind 709 0x2c5 O
Ellipsis INPN_ServIntActInd2_Ellipsis 1404 0x57c A

LocationInformation (sub-table)
LocationInformation
Parameter Mnemonic Value
dec hex
AgeOfLocation Information INPN_AgeOfLocation Information 124 0x7c O
GeographicalInformation INPN_GeographicalInformation 125 0x7d O
Vlr_Number INPN_Vlr_Number 126 0x7e O
LocationNumber INPN_LI_LocationNumber 127 0x7f O
CellGlobalIdOrServiceAreaIdOrLAI O
CellGlobalIdOrServiceAreaIdFixedLength INPN_CellIdFixedLength 122 0x7a C2
LAIFixedLength INPN_LAIFixedLength 123 0x7b C2
ExtensionContainer INPN_ExtensionContainer 128 0x80 O
Ellipsis INPN_LocationInfo_Ellipsis 114 0x72 A
SelectLSA-Id INPN_SelectLSAIdentity 765 0x2fd O
ISDNAddressString INPN_ISDNAddressString 726 0x2d6 O
GeodeticInformation INPN_GeodeticInformation 4229 0x1085 O
CurrentLocationRetrieved INPN_CurLocRetrieved 4228 0x1084 O
SAI-Present INPN_SAIPresent 763 0x2fb O

B.9.2 AssistRequestInstructions
INOP_AssistRequestInstructions
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CorrelationID INPN_CorrelationID 31 0x1f M
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

139
5 Non-Primitive Interface

B.9.3 EstablishTemporaryConnection
INOP_EstablishTemporaryConnection
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
AssistingSSPIPRouting Address INPN_AssistingSSPIPRouting 102 0x1 M
Address
CorrelationID INPN_CorrelationID 31 0x1f O
ScfID INPN_ScfID 38 0x26 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Carrier INPN_Carrier 40 0x28 O
ServiceInteractionIndicatorsTwo O
See ServiceInteractionIndicatorsTwo (sub-table) on page 138 O2
NaOliInfo INPN_NaOliInfo 141 0x8d O
ChargeNumber INPN_ChargeNumber 642 0x282 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.9.4 DisconnectForwardConnection
INOP_DisconnectForwardConnection
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

B.9.5 ConnectToResource
INOP_ConnectToResource
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ResourceAddress M
IPRoutingAddress INPN_IPRoutingAddress 31 0x1f C2
None INPN_None 650 0x28a C2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ServiceInteractionIndicatorsTwo O
See ServiceInteractionIndicatorsTwo (sub-table) on page 138 O2
Ellipsis INPN_Ellipsis 112 0x70 A

140
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.9.6 Connect
INOP_Connect
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
DestinationRouting Address INPN_DestinationRouting Address(0) 27 0x1b M
AlertingPattern INPN_AlertingPattern 30 0x1e O
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Carrier INPN_Carrier 40 0x28 O
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O
RedirectionInformation INPN_RedirectionInformation 26 0x1a O
GenericNumbers (SEQUENCE, size = 1 to 5) O
GenericNumber INPN_GenericNumber(n) 67 to 71 0x43 to O2
0x47
ServiceInteractionIndicatorsTwo O
(see ServiceInteractionIndicatorsTwo (sub-table) on page 138) O2
ChargeNumber INPN_ChargeNumber 642 0x282 O
CUG-Interlock INPN_CUG_Interlock 645 0x285 O
CUG-OutgoingAccess INPN_CUG_OutgoingAccess 646 0x286 O
Suppression of Announcement INPN_SuppressionOfAnnouncement 109 0x6d O
OCSIApplicable INPN_OCSIApplicable 110 0x6e O
NaOliInfo INPN_NAOliInfo 141 0x8d O
Ellipsis INPN_Ellipsis 112 0x70 A

B.9.7 ReleaseCall
INOP_ReleaseCall
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Cause INPN_Cause 41 0x29 O

141
5 Non-Primitive Interface

B.9.8 RequestReportBCSMEvent
INOP_RequestReportBCSMEvent
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
BCSMEvents (SEQUENCE, size = 1 to 10) M
EventTypeBCSM INPN_EventTypeBCSM(n) 192 to 0xc0 to M2
201 0xc9
MonitorMode INPN_MonitorMode(n) 208 to 0xd0 to M2
217 0xd9
LegID O2
SendingSideID INPN_SendingSideID(n) 224 to 0xe0 to C3
233 0xe9
ReceivingSideID INPN_ReceivingSideID(n) 240 to 0xf0 to C3
249 0xf9
DpSpecificCriteria O2
ApplicationTimer INPN_ApplicationTimer(n) 176 to 0xb0 to O3
185 0xb9
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

The BCSMEvent structure can be repeated up to ten times for each operation.
Replace ‘n’ with the position in the sequence of BCSMEvents starting from 0.
The LegID for each event may be specified as either a SendingSideID or a
ReceivingSideID. For some events, the LegID parameter is mandatory; for
example, events O-MidCall, O-Disconnect, T-MidCall and T-Disconnect in
CAMEL CAP v2 must have this parameter present. For other events, the legID
may take default values.

B.9.9 EventReportBCSM
INOP_EventReportBCSM
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
EventTypeBCSM INPN_EventTypeBCSM(0) 192 0xc0 M
EventSpecificInformationBCSM O
RouteSelectFailure C2
FailureCause INPN_FailureCause 94 0x5e O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
OcalledPartyBusy C2
BusyCause INPN_BusyCause 95 0x5f O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3

142
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_EventReportBCSM
Parameter Mnemonic Value
dec hex
OnoAnswer C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Oanswer C2
DestinationAddress INPN_DestinationAddr 648 0x288 O3
Or-Call INPN_OrCall 664 0x298 O3
ForwardedCall INPN_ForwardedCall 651 0x28b O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Odisconnect C2
ReleaseCause INPN_ReleaseCause 96 0x60 O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
TcalledPartyBusy C2
BusyCause INPN_BusyCause 95 0x5f O3
CallForwarded INPN_CallForwarded 639 0x27f O3
RouteNotPermitted INPN_RouteNotPermitted 753 0x2f1 O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
TnoAnswer C2
CallForwarded INPN_CallForwarded 639 0x27f O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Tanswer C2
DestinationAddress INPN_DestinationAddr 648 0x288 O3
Or-Call INPN_OrCall 664 0x298 O3
ForwardedCall INPN_ForwardedCall 651 0x28b O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Tdisconnect C2
ReleaseCause INPN_ReleaseCause 96 0x60 O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
LegID O
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 O2
MiscCallInfo O
MessageType INPN_MessageType 56 0x38 O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

143
5 Non-Primitive Interface

The event-specific information formatted or recovered is dependent on the

value of INPN_EventTypeBCSM(0). For example, if its value is Tdisconnect,
then the format procedures will use the parameter INPN_ReleaseCause.

B.9.10 Continue
INOP_Continue
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

B.9.11 ResetTimer
INOP_ResetTimer
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
TimerID INPN_TimerID 61 0x3d M
TimerValue INPN_TimerValue 62 0x3e M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.9.12 FurnishChargingInformation
INOP_FurnishChargingInformation
Parameter Mnemonic Value
dec hex
InvokeId INPN_InvokeId 1 0x1 M
FCIBCCCAMELsequence1 M
FreeFormatData INPN_FreeFormData 319 0x13f M2
PartyToCharge O2
SendingSideID INPN_SendingSideID(0) 224 0xe0 O3
AppendFreeFormatData INPN_AppendFreeFormData 637 0x27d D2
Default = overwrite (0)

144
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.9.13 ApplyCharging
INOP_ApplyCharging
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
TimeDurationCharging M
MaxCallPeriodDuration INPN_MaxCallPeriodDuration 159 0x9f M2
ReleaseIfDuration Exceeded INPN_ReleaseIfDurExceeded 750 0x2ee D2
Default = False
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O2
Tone INPN_Tone 778 0x30a D2
Default = False
Extensions2 (see Appendix B.15 Operation Extensions on page 282) O2
Ellipsis INPN_TmDurChar_Ellipsis 1374 0x55e A2
PartyToCharge O
SendingSideID INPN_SendingSideID(0) 224 0xe0 O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.9.14 ApplyChargingReport
INOP_ApplyChargingReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CAMEL-CallResult M
TimeDurationChargingResult M2
PartyToCharge M3
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 M4
TimeInformation M3
TimeIfNoTariffSwitch INPN_TimeIfNoTariffSwitch 776 0x308 C4
TimeIfTariffSwitch C4
TimeSinceTariffSwitch INPN_TmSinceTariffSwch 777 0x309 M5
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O5
CallActive INPN_CallActive 638 0x27e D3
Default = True
CallReleasedAtTcpExpiry INPN_CallReleasedAtTcpExp 640 0x280 O3
Extensions (see Appendix B.15 Operation Extensions on page 282) O3
Ellipsis INPN_TmDurCharRes_Ellipsis 1373 0x55d O3

145
5 Non-Primitive Interface

B.9.15 CallGap
INOP_CallGap
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
GapCriteria M
BasicGapCriteria C1
CalledAddressAndService C2
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3
ServiceKey INPN_ServiceKey 3 0x3 M3
Ellipsis INPN_CldAddrServ_Ellipsis 1398 0x576 O3
CallingAddressAndService C2
CallingAddressValue INPN_CallingAddressValue 99 0x63 M3
ServiceKey INPN_ServiceKey 3 0x3 M3
Ellipsis INPN_ClgAddrServ_Ellipsis 1400 0x578 O3
GapOnService C2
ServiceKey INPN_ServiceKey 3 0x3 M3
Ellipsis INPN_GapOnServ_Ellipsis 1401 0x579 O3
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 C2
CompoundGapCriteria C1
CompoundCalledAddressAndService C2
CalledAddressValue INPN_ComCalledAddressValue 894 0x37e M3
ServiceKey INPN_ComServiceKey 893 0x37d M3
Ellipsis INPN_CldAddrServ_Ellipsis 1398 0x576 O3
CompoundCallingAddressAndService C2
CallingAddressValue INPN_CallingAddressValue 99 0x63 M3
ServiceKey INPN_ComServiceKey 893 0x37d M3
Ellipsis INPN_ClgAddrServ_Ellipsis 1400 0x578 O3
CompoundGapOnService C2
ServiceKey INPN_ComServiceKey 893 0x37d M3
Ellipsis INPN_GapOnServ_Ellipsis 1401 0x579 O3
CompoundCalledAddressValue INPN_ComCalledAddressValue 894 0x37e C2
ScfId INPN_ScfID 38 0x26 O2
GapIndicators M
GapDuration INPN_Gap_Duration 72 0x48 M2
GapInterval INPN_GapInterval 73 0x49 M2
Ellipsis INPN_GapInd_Ellipsis 1411 0x583 A2
ControlType INPN_ControlType 101 0x65 O

146
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_CallGap
Parameter Mnemonic Value
dec hex
GapTreatment O
InformationToSend C2
See InformationToSend (Sub-table) on page 100 O3
ReleaseCause INPN_ReleaseCause 96 0x60 C2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.9.16 CallInformationReport
INOP_CallInformationReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
RequestedInformationList (SEQUENCE, size = 1 to 4) M
RequestedInformationType INPN_RequestedInformationType 288 to 0x120 to M2
291 0x123
RequestedInformationValue M2
CallAttemptEllapsedTimeValue INPN_CallAttemptEllapsedTimeValue(n) 293 to 0x125 to C3
296 0x128
CallStopTimeValue INPN_CallStopTimeValue(n) 298 to 0x12a to C3
301 0x12d
CallConnectedElapsedTimeValue INPN_CallConnectedElapsedTimeValue(n) 303 to 0x12f to C3
306 0x132
ReleaseCauseValue INPN_ReleaseCauseValue(n) 313 to 0x139 to C3
316 0x13c
Extensions (see Appendix B.15 Operation Extensions on page 282) O
LegID O
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 O2
Ellipsis INPN_Ellipsis 112 0x70 A

147
5 Non-Primitive Interface

B.9.17 CallInformationRequest
INOP_CallInformationReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
RequestedInformationReport (SEQUENCE, size = 1 to 4) M
RequestedInformation Type(n) INPN_RequestedInformation Type(n) 288 0x120 M2
to to
291 0x123
Extensions (see Appendix B.15 Operation Extensions on page 282) O
LegID O
SendingSideID INPN_SendingSideID(0) 224 0xe0 O2
Ellipsis INPN_Ellipsis 112 0x70 A

B.9.18 SendChargingInformation
INOP_SendChargingInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CAMEL-SCIBillingChargingCharacteristics M
AOCBeforeAnswer C2
AOCInitial M3
E1 INPN_Initial_CAI_E1 144 0x90 O4
E2 INPN_Initial_CAI_E2 145 0x91 O4
E3 INPN_Initial_CAI_E3 146 0x92 O4
E4 INPN_Initial_CAI_E4 147 0x93 O4
E5 INPN_Initial_CAI_E5 148 0x94 O4
E6 INPN_Initial_CAI_E6 149 0x95 O4
E7 INPN_Initial_CAI_E7 150 0x96 O4
AOCSubsequent O3
CAI-GSM0224 M4
E1 INPN_Subsequent_CAI_E1 151 0x97 O5
E2 INPN_Subsequent_CAI_E2 152 0x98 O5
E3 INPN_Subsequent_CAI_E3 153 0x99 O5
E4 INPN_Subsequent_CAI_E4 154 0x9a O5
E5 INPN_Subsequent_CAI_E5 155 0x9b O5
E6 INPN_Subsequent_CAI_E6 156 0x9c O5
E7 INPN_Subsequent_CAI_E7 157 0x9d O5
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O4
148
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_SendChargingInformation
Parameter Mnemonic Value
dec hex
AOCAfterAnswer C2
AOCSubsequent O3
CAI-GSM0224 M4
E1 INPN_Subsequent_CAI_E1 151 0x97 O5
E2 INPN_Subsequent_CAI_E2 152 0x98 O5
E3 INPN_Subsequent_CAI_E3 153 0x99 O5
E4 INPN_Subsequent_CAI_E4 154 0x9a O5
E5 INPN_Subsequent_CAI_E5 155 0x9b O5
E6 INPN_Subsequent_CAI_E6 156 0x9c O5
E7 INPN_Subsequent_CAI_E7 157 0x9d O5
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O4
PartyToCharge M
SendingSideID INPN_SendingSideID(0) 224 0xe0 M2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

Note: INPN_CAMEL_AOC_BeforeAnswer will not be formatted or decoded. It is used to

determine if the AOC is for before or after answer. If present, AOCBeforeAnswer
will be sent, otherwise AOCAfterAnswer will be sent. The data stored in the
INPN_CAMEL_AOC_BeforeAnswer may be of any value.

B.9.19 PlayAnnouncement
INOP_PlayAnnouncement
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
InformationToSend M
See InformationToSend (Sub-table) on page 100 M2
DisconnectFromIP Forbidden INPN_DisconnectFromIP Forbidden 59 0x3b D
Default = True
RequestAnnouncement Complete INPN_RequestAnnouncement Complete 60 0x3c D
Default = True
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

149
5 Non-Primitive Interface

B.9.20 PromptAndCollectUserInformation
INOP_ PromptAndCollectUserInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CollectedInfo M
CollectedDigits M2
MinimumNumberOfDigits INPN_MinimumNumberOfDigits 74 0x4a D3
Default = 1
MaximumNumberOf Digits INPN_MaximumNumberOf Digits 75 0x4b M3
EndOfReplyDigit INPN_EndOfReplyDigit 76 0x4c O3
CancelDigit INPN_CancelDigit 77 0x4d O3
StartDigit INPN_StartDigit 78 0x4e O3
FirstDigitTimeOut INPN_FirstDigitTimeOut 79 0x4f O3
InterDigitTimeOut INPN_InterDigitTimeOut 80 0x50 O3
Errortreatment INPN_Errortreatment 81 0x51 D3
Default = StfErrorAndInfo
InterruptableAndInd INPN_InterruptableAnnInd 82 0x52 D3
Default = True
VoiceInformation INPN_VoiceInformation 83 0x53 D3
Default = False
VoiceBack INPN_VoiceBack 84 0x54 D3
Default = False
DisconnectFromIP Forbidden INPN_DisconnectFromIP Forbidden 59 0x3b D
Default = True
InformationToSend O
See InformationToSend (Sub-table) on page 100 M2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.9.21 SpecializedResourceReport
INOP_ SpecializedResourceReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
LinkedID INPN_LinkedID 2 0x2 O

150
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.9.22 Cancel
INOP_Cancel
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Cancel_InvokeID INPN_Cancel_InvokeID 86 0x56 O

If the parameter INPN_Cancel_InvokeID is not set then the operation will be

sent with the null parameter ‘All Requests’ indicating all operations on that
dialogue should be cancelled.

B.9.23 ActivityTest
INOP_ ActivityTest
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

B.9.24 ContinueWithArg
INOP_ ContinueWithArgument
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
AlertingPattern INPN_AlertingPattern 30 0x1e O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ServiceInteractionIndicatorsTwo O
See ServiceInteractionIndicatorsTwo (sub-table) on page 138 O2
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O
GenericNumbers (SEQUENCE, size = 1 to 5) O
GenericNumber INPN_GenericNumber(n) 67 to 0x43 to O2
71 0x47
CUG_Interlock INPN_CUG_Interlock 645 0x285 O
CUG_OutgoingAccess INPN_CUG_OutgoingAccess 646 0x286 O
ChargeNumber INPN_ChargeNumber 642 0x282 O
Carrier INPN_Carrier 40 0x28 O
SuppressionOfAnnouncement INPN_SuppressionOfAnnouncement 109 0x6d O
NAOliInfo INPN_NAOliInfo 141 0x8d O
Ellipsis INPN_Ellipsis 112 0x70 A

151
5 Non-Primitive Interface

B.9.25 InitialDPSMS
INOP_InitialDPSMS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Servicekey INPN_ServiceKey 3 0x3 O
DestinationSubscriber Number INPN_DestSubscriberNumber 649 0x289 O
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O
EventTypeSMS INPN_EventTypeSMS(0) 861 0x35d O
IMSI INPN_IMSI 130 0x82 O
LocationInformationMSC O
See LocationInformation (sub-table) on page 139 O2
LocationInformationGPRS O
See LocationInformationGPRS (sub-table) below O2
SMSCAddress INPN_SMSCAddress 768 0x300 O
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf O
TPShortMessage SubmissionInfo INPN_TPShtMsgSubInfo 781 0x30d O
TPProtocolIdentifier INPN_TPProtocolID 780 0x30c O
TPDataCodingScheme INPN_TPDataCodingScheme 779 0x30b O
TPValidityPeriod INPN_TPValidityPeriod 782 0x30e O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
SMSReferenceNumber INPN_SMSReferenceNumber 770 0x302 O
MSCAddress INPN_MSCAddress 132 0x84 O
SGSN Number INPN_SGSNNumber 767 0x2ff O
Ellipsis INPN_Ellipsis 112 0x70 A

LocationInformationGPRS (sub-table)
LocationInformationGPRS
Parameter Mnemonic Value
dec hex
CellGlobalIdOrService AreaIdOrLAI INPN_CGlobal_Sarea_LAI 641 0x281 O
RoutingAreaIdentity INPN_GPRSRoutingAreaID 897 0x381 O
GeographicalInformation INPN_GPRSGeographical Information 895 0x37f O
SGSN Number INPN_LocationInfoGPRS_SGSNNumber 4231 0x1087 O
SelectedLSAIdentity INPN_LocationInfoGPRS_SelLSAIdentity 4281 0x10b9 O
ExtensionContainer INPN_GPRSExtensionContainer 896 0x380 O
Ellipsis INPN_LocationInfoGPRS_Ellipsis 1369 0x559 A
SAI-Present INPN_LocationInfoGPRS_SAIPresent 4232 0x1088 O

152
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.9.26 FurnishChargingInformationSMS
INOP_FurnishChargingInformationSMS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
FCIBCCCAMELsequence1 M
FreeFormatData INPN_FreeFormData 319 0x13f M2
AppendFreeFormatData INPN_AppendFreeFormData 637 0x27d D2
Default = overwrite (0)

B.9.27 Connect SMS

INOP_ConnectSMS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CallingPartysNumber INPN_CallingPartyNumber 6 0x6 O
DestinationSubscriber Number INPN_DestSubscriberNumber 649 0x289 O
SMSCAddress INPN_SMSCAddress 768 0x300 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.9.28 RequestReportSMSEvent
INOP_RequestReportSMSEvent
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
SMSEvents (SEQUENCE, size = 1 to 10) M
EventTypeSMS INPN_EventTypeSMS(n) 861 to 870 0x35d to 0x366 M2
MonitorMode INPN_MonitorMode(n) 208 to 217 0xd0 to 0xd9 M2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

153
5 Non-Primitive Interface

B.9.29 EventReportSMS
INOP_EventReportSMS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
EventTypeSMS INPN_EventType(0) 861 M
EventSpecificInformationSMS O
O-SMSFailureSpecificInfo C2
FailureCause INPN_FailureCause 94 0x5e M3
Ellipsis INPN_EventSpecInfoSMS _Ellipsis 1371 0x55b A3
O-SMSSubmitSpecificInfo C2
--No Info--
Ellipsis INPN_EventSpecInfoSMS _Ellipsis 1371 0x55b A3
MiscCallInfo O
MessageType INPN_MessageType 56 0x38 O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.9.30 ContinueSMS
INOP_ContinueSMS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

B.9.31 ReleaseSMS
INOP_ReleaseSMS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
RPCause INPN_RPCause 762 0x2fa M

154
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.9.32 ResetTimerSMS
INOP_ResetTimerSMS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
TimerID INPN_TimerID 61 0x3d M
TimerValue INPN_TimerValue 62 0x3e M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.9.33 ActivityTestGPRS
INOP_ActivityTestGPRS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

B.9.34 ApplyChargingGPRS
INOP_ApplyChargingGPRS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ChargingCharacteristics M
MaxTransferredVolume INPN_MaxTransferredVol 659 0x293 C2
MaxElapsedTime INPN_MaxElapsedTime 658 0x292 C2
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O
PDPID INPN_PDPID 665 0x299 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.9.35 ApplyChargingReportGPRS
INOP_ApplyChargingReportGPRS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ChargingResult M
TransferredVolume C2
VolumeIfNoTariffSwitch INPN_VolIfNoTariffSwch 785 0x311 C3
VolumeIfTariffSwitch C3

155
5 Non-Primitive Interface

INOP_ApplyChargingReportGPRS
Parameter Mnemonic Value
dec hex
VolumeSinceLastTariff Switch INPN_VolLastTariffSwch 783 0x30f M4
VolumeTariffSwitch Interval INPN_VolTariffSwchInt 784 0x310 O4
ElapsedTime C2
TimeGPRSIfNoTariff Switch INPN_TmGPRSIfNoTariffSwch 776 0x308 C3
TimeGPRSIfTariffSwitch C3
TimeGPRSSinceLast TariffSwitch INPN_TmGPRSSinceLast TariffSwch 774 0x306 M4
TimeGPRSTariffSwitch Interval INPN_TmGPRSTariffSwchInt 775 0x307 O4
QualityOfService O
See CAMEL v3 QualityOfService (sub-table) on page 157 O2
Active INPN_Active 636 0x27c D
Default = True
PDPID INPN_PDPID 665 0x299 O
ChargingRollOver O
TransferredVolumeRollOver C2
Ro-VolumeIfNoTariff Switch INPN_RO_VoIIfNoTariffSwch 761 0x2f9 C3
Ro-VolumeIfTariffSwitch C3
Ro-VolumeSinceLast TariffSwitch INPN_RO_VolLastTariffSwch 759 0x2f7 M4
Ro-VolumeTariffSwitch Interval INPN_RO_VolTariffSwchInt 760 0x2f8 O4
ElapsedTimeRollOver C2
Ro-TimeGPRSIfNoTariff Switch INPN_RO_TmGPRSNoTariff Swch 756 0x2f4 C3
Ro-TimeGPRSIfTariffSwitch C3
Ro-TimeGPRSSinceLast TariffSwitch INPN_RO_TmGPRSLastTariffSwch 757 0x2f5 M4
Ro-TimeGPRSTariff SwitchInterval INPN_RO_TmGPRSTariffSwchInt 758 0x2f6 O4
Ellipsis INPN_Ellipsis 112 0x70 A

156
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

CAMEL v3 QualityOfService (sub-table)

QualityOfService
Parameter Mnemonic Value
dec hex
Requested-QoS O
Short-QoS-Format INPN_ReqShtQoSFormat 751 0x2ef C2
Long-QoS-Format INPN_ReqLngQoSFormat 752 0x2f0 C2
Subscribed-QoS O
Short-QoS-Format INPN_SubShtQoSFormat 771 0x303 C2
Long-QoS-Format INPN_SubLngQoSFormat 772 0x304 C2
Negotiated-QoS O
Short-QoS-Format INPN_NegShtQoSFormat 746 0x2ea C2
Long-QoS-Format INPN_NegLngQoSFormat 747 0x2eb C2

B.9.36 CancelGPRS
INOP_CancelGPRS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
PDPID INPN_PDPID 665 0x299 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.9.37 ConnectGPRS
INOP_ConnectGPRS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
AccessPointName INPN_AccessPtName 592 0x250 M
PDPID INPN_PDPID 665 0x299 O
Ellipsis INPN_Ellipsis 112 0x70 A

157
5 Non-Primitive Interface

B.9.38 ContinueGPRS
INOP_ContinueGPRS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
PDPID INPN_PDPID 665 0x299 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.9.39 EntityReleasedGPRS
INOP_EntityReleasedGPRS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
GPRSCause INPN_GPRSCause 654 0x28e M
PDPID INPN_PDPID 665 0x299 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.9.40 FurnishChargingInformationGPRS
INOP_FurnishChargingInformationGPRS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
FCIBCCCAMELsequence1 M
FreeFormatData INPN_FreeFormData 319 0x13f M2
PDPID INPN_PDPID 665 0x299 O2
AppendFreeFormatData INPN_AppendFreeFormData 637 0x27d D2
Default = overwrite (0)
Ellipsis INPN_FCIGPRSseq_Ellipsis 1367 0x557

158
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.9.41 InitialDPGPRS
INOP_InitialDPGPRS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Servicekey INPN_Servicekey 3 0x3 M
GPRSEventType INPN_GPRSEventType(0) 877 0x36d M
MSISDN INPN_MSISDN 660 0x294 M
IMSI INPN_IMSI 130 0x82 M
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf M
GPRSMSClass O
MSNetworkCapability INPN_MSNetworkCapability 661 0x295 M2
MSRadioAccess Capability INPN_MSRadioAccess Capability 662 0x296 O2
EndUserAddress O
PDPTypeOrganisation INPN_PDPTypeOrganisation 749 0x2ed M2
PDPTypeNumber INPN_PDPTypeNumber 748 0x2ec M2
PDPAddress INPN_PDPAddress 666 0x29a O2
QualityOfService O
See CAMEL v3 QualityOfService (sub-table) on page 157 O2
AccessPointName INPN_AccessPtName 592 0x250 O
RoutingAreaIdentity INPN_RoutingAreaID 754 0x2f2 O
ChargingID INPN_ChargingID 643 0x283 O
SGSNCapabilities INPN_SGSNCapabilities 766 0x2fe O
LocationInformationGPRS O
See LocationInformationGPRS (sub-table) on page 152 O2
PDPInitiationType INPN_PDPInitiationType 667 0x29b O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
GGSNAddress INPN_GGSNAddress 652 0x28c O
SecondaryPDP-Context INPN_SecondaryPDPContext 764 0x2fc O
Ellipsis INPN_Ellipsis 112 0x70 A

B.9.42 ReleaseGPRS
INOP_ReleaseGPRS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
GPRSCause INPN_GPRSCause 654 0x28e M
PDPID INPN_PDPID 665 0x299 O
Ellipsis INPN_Ellipsis 112 0x70 A

159
5 Non-Primitive Interface

B.9.43 EventReportGPRS
INOP_EventReportGPRS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
GPRSEventType INPN_GPRSEventType(0) 877 0x36d M
MiscCallInfo O
MessageType INPN_MessageType 56 0x38 O2
GPRSEventSpecificInformation O
AttachChangeOfPositionSpecificInformation C2
LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 152) O3
O4
Ellipsis INPN_EventSpecInfoGPRS _Ellipsis 1372 0x55c A3
PDP-ContextChangeOfPositionSpecificInformation C2
AccessPointName INPN_AccessPtName 592 0x250 O3
GPRSChargingID INPN_GPRSChargingID 655 0x28f O3
LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 152) O3
O4
EndUserAddress O3
PDPTypeOrganisation INPN_PDPTypeOrganisation 749 0x2ed M4
PDPTypeNumber INPN_PDPTypeNumber 748 0x2ec M4
PDPAddress INPN_PDPAddress 666 0x29a O4
QualityOfService (see CAMEL v3 QualityOfService (sub-table) on page 157) O3

O4
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf O3
Ellipsis INPN_EventSpecInfoGPRS _Ellipsis 1372 0x55c A3
GGSNAddress INPN_GGSNAddress 652 0x28c O3
DetachSpecificInformation C2
InitiatingEntity INPN_InitiatingEntity 942 0x3ae O3
Ellipsis INPN_EventSpecInfoGPRS _Ellipsis 1372 0x55c A3
RoutingAreaUpdate INPN_RoutingAreaUpdate 755 0x2f3 O3
DisconnectSpecificInformation C2
InitiatingEntity INPN_InitiatingEntity 942 0x3ae O3
Ellipsis INPN_EventSpecInfoGPRS _Ellipsis 1372 0x55c A3
RoutingAreaUpdate INPN_RoutingAreaUpdate 755 0x2f3 O3
PDPContextEstablishmentSpecificInformation C2
AccessPointName INPN_AccessPtName 592 0x250 O3
EndUserAddress O3

160
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_EventReportGPRS
Parameter Mnemonic Value
dec hex
PDPTypeOrganisation INPN_PDPTypeOrganisation 749 0x2ed M4
PDPTypeNumber INPN_PDPTypeNumber 748 0x2ec M4
PDPAddress INPN_PDPAddress 666 0x29a O4
QualityOfService (see CAMEL v3 QualityOfService (sub-table) on page 157) O3
O4
LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 152) O3
O4
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf O3
PDPInitiationType INPN_PDPInitiationType 667 0x29b O3
Ellipsis INPN_EventSpecInfoGPRS _Ellipsis 1372 0x55c A3
SecondaryPDP-Context INPN_SecondaryPDPContext 764 0x2fc O3
PDPContextEstablishmentAcknowledgementSpecificInformation C2
AccessPointName INPN_AccessPtName 592 0x250 O3
GPRSChargingID INPN_GPRSChargingID 655 0x28f O3
EndUserAddress O3
PDPTypeOrganisation INPN_PDPTypeOrganisation 749 0x2ed M4
PDPTypeNumber INPN_PDPTypeNumber 748 0x2ec M4
PDPAddress INPN_PDPAddress 666 0x29a O4
QualityOfService (see CAMEL v3 QualityOfService (sub-table) on page 157) O3
O4
LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 152) O3
O4
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf O3
Ellipsis INPN_EventSpecInfoGPRS _Ellipsis 1372 0x55c A3
GGSNAddress INPN_GGSNAddress 652 0x28c O3
PDPID INPN_PDPID 655 0x28f O
Ellipsis INPN_Ellipsis 112 0x70 A

161
5 Non-Primitive Interface

B.9.44 RequestReportGPRSEvent
INOP_RequestReportGPRSEvent
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
GPRSEvent (SEQUENCE, size = 1 to 10) M
GPRSEventType INPN_GPRSEventType(n) 877 to 886 0x36d to 0x376 M2
MonitorMode INPN_MonitorMode(n) 208 to 217 0xd0 to 0xd9 M2
PDPID INPN_PDPID 665 0x299 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.9.45 ResetTimerGPRS
INOP_ResetTimerGPRS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
TimerID INPN_TimerID 61 0x3d D
Default = tssf (0)
TimerValue INPN_TimerValue 62 0x3e M
Ellipsis INPN_Ellipsis 112 0x70 A

B.9.46 SendChargingInformationGPRS
INOP_SendChargingInformationGPRS
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CAMEL-SCIGPRSBillingChargingCharacteristics M
AOCGPRS M2
AOCInitial M3
E1 INPN_Initial_CAI_E1 144 0x90 O4
E2 INPN_Initial_CAI_E2 145 0x91 O4
E3 INPN_Initial_CAI_E3 146 0x92 O4
E4 INPN_Initial_CAI_E4 147 0x93 O4
E5 INPN_Initial_CAI_E5 148 0x94 O4
E6 INPN_Initial_CAI_E6 149 0x95 O4
E7 INPN_Initial_CAI_E7 150 0x96 O4
AOCSubsequent O3
CAI-GSM0224 M4

162
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_SendChargingInformationGPRS
Parameter Mnemonic Value
dec hex
E1 INPN_Subsequent_CAI_E1 151 0x97 O5
E2 INPN_Subsequent_CAI_E2 152 0x98 O5
E3 INPN_Subsequent_CAI_E3 153 0x99 O5
E4 INPN_Subsequent_CAI_E4 154 0x9a O5
E5 INPN_Subsequent_CAI_E5 155 0x9b O5
E6 INPN_Subsequent_CAI_E6 156 0x9c O5
E7 INPN_Subsequent_CAI_E7 157 0x9d O5
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O4
PDPID INPN_PDPID 665 0x299 O2
Ellipsis INPN_Ellipsis 112 0x70 A2

163
5 Non-Primitive Interface

B.10 CAMEL v4 Operation Definitions

B.10.1 InitialDP
INOP_InitialDP
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
ServiceKey INPN_ServiceKey 3 0x03 M
CalledPartyNumber INPN_CalledPartyNumber 5 0x05 O
CallingPartyNumber INPN_CallingPartyNumber 6 0x06 O
CallingPartysCategory INPN_CallingPartysCategory 8 0x08 O
cGEncountered INPN_cGEncountered 10 0x0a O
IPSSPCapabilities INPN_IPSSPCapabilities 11 0x0b O
LocationNumber INPN_LocationNumber 13 0x0d O
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0x0f O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x13 O
AdditionalCallingParty Number INPN_AdditionalCallingParty Number 21 0x15 O
BearerCapability O
BearerCapability INPN_BearerCapability 23 0x17 C2
Ellipsis INPN_BearerCap_Ellipsis 119 0x77 C2
EventTypeBCSM INPN_EventTypeBCSM(0) 192 0xc0 O
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O
RedirectionInformation INPN_RedirectionInformation 26 0x1a O
Cause INPN_Cause 41 0x29 O
ServiceInteractionIndicatorsTwo O
(see ServiceInteractionIndicatorsTwo (sub-table) on page 138) O2
Carrier INPN_Carrier 40 0x28 O
CUG-Index INPN_CUG_Index 644 0x284 O
CUG-Interlock INPN_CUG_Interlock 645 0x285 O
CUG-OutgoingAccess INPN_CUG_OutgoingAccess 646 0x286 O
IMSI INPN_IMSI 130 0x81 O
SubscriberState O
AssumedIdle INPN_AssumedIdle 134 0x86 C2
CamelBusy INPN_CamelBusy 135 0x87 C2
NetDetNotReachable INPN_NetDetNotReachable 136 0x88 C2
NotProvidedFromVLR INPN_NotProvidedFromVLR 137 0x89 C2

164
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_InitialDP
Parameter Mnemonic Value
(dec) (hex)
LocationInformation (see LocationInformation (sub-table) on page 139) O
O2
Ext_BasicServicesCode O
BearerServiceCode INPN_Ext_BearerServiceCode 120 0x78 C2
TeleserviceCode INPN_Ext_TeleserviceCode 121 0x79 C2
CallReferenceNumber INPN_CallReferenceNumber 131 0x83 O
MSCAddress INPN_MSCAddress 132 0x84 O
CalledPartyBCDNumber INPN_CalledPartyBCDNumber 129 0x80 O
TimeAndTimezone INPN_TimeAndTimezone 703 0x2bf O
CallForwardingSS Pending INPN_GSM_ForwardingPending 133 0x85 O
IDPArgExtension O
GMSC Address INPN_GMSCAddress 653 0x28d O2
ForwardingDestNumber INPN_ForwardingDestNumber 2776 0xad8 O2
MSClassMark2 INPN_MSClassMark2 2777 0xad9 O2
IMEI INPN_IMEI 2778 0xada O2
SupportedCamelPhases INPN_SupportedCamelPhases 2779 0xadb O2
OfferedCamel4Functionalities INPN_OfferedCamel4Functionalities 2780 0xadc O2
BearerCapability2 O2
BearerCapability2 INPN_BearerCapability2 2771 0xad3 O3
Ext_BasicServiceCode2 O2
Ext_BearerServiceCode2 INPN_Ext_BearerServiceCode2 2764 0xacc C3
Ext_TeleserviceCode2 INPN_Ext_TeleserviceCode2 2765 0xacd C3
HighLayerCompatibility2 INPN_HighLayerCompatibility2 2781 0xadd O2
LowLayerCompatibility INPN_LowLayerCompatibility 2782 0xade O2
LowLayerCompatibility2 INPN_LowLayerCompatibility2 2783 0xadf O2
Ellipsis INPN_InitialDPArgExt_Ellipsis 117 0x75 A2
EnhancedDialledServicesAllowed INPN_EnhancedDialledServicesAllowed 2784 0xae0 O2
UU_Data O2
UUIndicator INPN_UUIndicator 2773 0xad5 O3
UUI INPN_UUI 2774 0xad6 O3
uusCFInteraction INPN_uusCFInteraction 2775 0xad7 O3
UU_ExtensionContainer INPN_UU_ExtensionContainer 4230 0x1086 O3
Ellipsis INPN_UU_Ellipsis 4216 0x1078 A3
CollectInformationAllowed INPN_collectInformationAllowed 2785 0xae1 O2
Ellipsis INPN_Ellipsis 112 0x70 A

165
5 Non-Primitive Interface

B.10.2 AssistRequestInstructions
INOP_AssistRequestInstructions
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
CorrelationID INPN_CorrelationID 31 0x1f M
IPSSPCapabilities INPN_IPSSPCapabilities 11 0x0b M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.3 EstablishTemporaryConnection
INOP_EstablishTemporaryConnection
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
AssistingSSPIPRouting INPN_AssistingSSPIPRouting 102 0x66 M
Address Address
CorrelationID INPN_CorrelationID 31 0x1f O
ScfID INPN_ScfID 38 0x26 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Carrier INPN_Carrier 40 0x28 O
ServiceInteractionIndicatorsTwo O
(see ServiceInteractionIndicatorsTwo (sub-table) on page 138) O2
CallSegmentId INPN_CallSegmentID 320 0x140 O
NAOliInfo INPN_NAOliInfo 141 0x8d O
ChargeNumber INPN_ChargeNumber 642 0x282 O
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0x0f O
CallingPartyNumber INPN_CallingPartyNumber 6 0x06 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.4 DisconnectForwardConnection
INOP_DisconnectForwardConnection
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M

166
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.10.5 DFCWithArgument
INOP_DFC_with_Argument
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
CallSegmentID INPN_CallSegmentID 320 0x140 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.6 ConnectToResource
INOP_ConnectToResource
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
ResourceAddress M
IPRoutingAddress INPN_IPRoutingAddress 31 0x1f C2
None INPN_None 650 0x28a C2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ServiceInteractionIndicatorsTwo O
(see ServiceInteractionIndicatorsTwo (sub-table) on page 138) O2
CallSegmentID INPN_CallSegmentID 320 0x140 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.7 Connect
INOP_Connect
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
DestinationRouting Address INPN_DestinationRouting 27 0x1b M
Address(0)
AlertingPattern INPN_AlertingPattern 30 0x1e O
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0x0f O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Carrier INPN_Carrier 40 0x28 O
CallingPartysCategory INPN_CallingPartysCategory 8 0x08 O
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O
RedirectionInformation INPN_RedirectionInformation 26 0x1a O
GenericNumbers (SET, size = 1 to 5) O

167
5 Non-Primitive Interface

INOP_Connect
Parameter Mnemonic Value
(dec) (hex)
GenericNumber INPN_GenericNumber(n) 67 to 0x43 to O2
71 0x47
ServiceInteractionIndicatorsTwo O
(see ServiceInteractionIndicatorsTwo (sub-table) on page 138) O2
ChargeNumber INPN_ChargeNumber 642 0x282 O
LegID O
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
CUG-Interlock INPN_CUG_Interlock 645 0x285 O
CUG-OutgoingAccess INPN_CUG_OutgoingAccess 646 0x286 O
Suppression of INPN_SuppressionOfAnnouncement 109 0x6d O
Announcement
OCSIApplicable INPN_OCSIApplicable 110 0x6e O
NaOliInfo INPN_NAOliInfo 141 0x8d O
BorInterrogationRequested INPN_BorInterrogationRequested 2787 0xae3 O
SuppressNCSI INPN_SuppressNCSI 2788 0xae4 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.8 ReleaseCall
INOP_ReleaseCall
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
Cause INPN_Cause 41 0x29 M

168
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.10.9 RequestReportBCSMEvent
INOP_RequestReportBCSMEvent
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
7
BCSMEvents (SEQUENCE, size = 1 to 16) M
EventTypeBCSM INPN_EventTypeBCSM(n) 192 to 0xc0 to M2
207 0xcf
MonitorMode INPN_MonitorMode(n) 208 to 0xd0 to M2
223 0xdf

LegID O2
SendingSideID INPN_SendingSideID(n) 224 to 0xe0 to C3
239 0xef

ReceivingSideID INPN_ReceivingSideID(n) 240 to 0xf0 to C3

255 0xff
DPSpecificCriteria O2
ApplicationTimer INPN_ApplicationTimer(n) 176 to 0xb0 to C3
191 0xbf
MidCallControlInfo C3
MinimumNumberOfDigitsSeq INPN_MinimumNumberOfDigitsSeq(n) 2789 to 0x to 0x O4
2804
MaximumNumberOfDigitsSeq INPN_MaximumNumberOfDigitsSeq(n) 2805 to 0x to 0x O4
2820
EndOfReplyDigitSeq INPN_EndOfReplyDigitSeq(n) 2821 to 0x to 0x O4
2836
CancelDigitSeq INPN_CancelDigitSeq(n) 2837 to 0x to 0x O4
2852
StartDigitSeq INPN_StartDigitSeq(n) 2853 to 0x to 0x O4
2868
InterDigitTimeout INPN_MC_InterDigitTimeout(n) 4265 to 0x to 0x O4
4280
Ellipsis INPN_MidCallCtlInfoEllipsis(n) 4249 to 0x to 0x A4
4264
DpSpecificCriteriaAlt C3
ChangeOfPositionControlInfo (SEQUENCE, size = 1 to 10)²8 O4
ChangeOfLocation[0] O5
CellGlobalId INPN_CellGlobalId0(n) 2885 to 0xb45 to O6
2900 0xb54

7
The BCSMEvent structure can be repeated up to 16 times for each operation. Replace ‘n’ with the position in the sequence
of BCSMEvents starting from 0. The CAP v4 specification indicates that the structure may be repeated up to 30 times. This
has not been implemented due to implementation reasons.
8
The ChangeOfLocation structure can be repeated up to 10 times – for each instance of BCSMEvent. This nesting has
required that the instances of the ChangeOfLocation parameters are given unique names; for example,
INPN_ServiceAreaId9(15) for the ServiceAreaId parameter in the 10th instance of ChangeOfLocation within the 16th BCSM
Event.
169
5 Non-Primitive Interface

INOP_RequestReportBCSMEvent
Parameter Mnemonic Value
(dec) (hex)
ServiceAreaId INPN_ServiceAreaId0(n) 2901 to 0xb55 to O6
2916 0xb64
LocationAreaId INPN_LocationAreaId0(n) 2917 to 0xb65 to O6
2932 0xb74
InterSystemHandOver INPN_InterSystemHandOver0(n) 2933 to 0xb75 to O6
2948 0xb84
InterPLMNHandOver INPN_InterPLMNHandOver0(n) 2949 to 0xb85 to O6
2964 0xb94
InterMSCHandOver INPN_InterMSCHandOver0(n) 2965 to 0xb95 to O6
2980 0xba4
ChangeOfLocationAlt0 O6
Ellipsis INPN_ChangeOfLocationEllipsis0(n) 2981 to 0xba5 to A7
2996 0xbb4
ChangeOfLocation[1] O5
CellGlobalId INPN_CellGlobalId1(n) 2997 to 0xbb5 to O6
3012 0xbc4
ServiceAreaId INPN_ServiceAreaId1(n) 3013 to 0xbc5 to O6
3028 0xbd4
LocationAreaId INPN_LocationAreaId1(n) 3029 to 0xbd5 to O6
3044 0xbe4
InterSystemHandOver INPN_InterSystemHandOver1(n) 3045 to 0xbe5 to O6
3060 0xbf4
InterPLMNHandOver INPN_InterPLMNHandOver1(n) 3061 to 0xbf5 to O6
3076 0xc04
InterMSCHandOver INPN_InterMSCHandOver1(n) 3077 to 0xc05 to O6
3092 0xc14
ChangeOfLocationAlt1 O6
Ellipsis INPN_ChangeOfLocationEllipsis1(n) 3093 to 0xc15 to A7
3108 0xc24
ChangeOfLocation[2] O5
CellGlobalId INPN_CellGlobalId2(n) 3109 to 0xc25 to O6
3124 0xc34
ServiceAreaId INPN_ServiceAreaId2(n) 3125 to 0xc35 to O6
3140 0xc44
LocationAreaId INPN_LocationAreaId2(n) 3141 to 0xc45 to O6
3156 0xc54
InterSystemHandOver INPN_InterSystemHandOver2(n) 3157 to 0xc55 to O6
3172 0xc64
InterPLMNHandOver INPN_InterPLMNHandOver2(n) 3173 to 0xc65 to O6
3188 0xc74
InterMSCHandOver INPN_InterMSCHandOver2(n) 3189 to 0xc75 to O6
3204 0xc84
ChangeOfLocationAlt2 O6

170
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_RequestReportBCSMEvent
Parameter Mnemonic Value
(dec) (hex)
Ellipsis INPN_ChangeOfLocationEllipsis2(n) 3205 to 0xc85 to A7
3220 0xc94
ChangeOfLocation[3] O5
CellGlobalId INPN_CellGlobalId3(n) 3221 to 0xc95 to O6
3236 0xca4
ServiceAreaId INPN_ServiceAreaId3(n) 3237 to 0xca5 to O6
3252 0xcb4
LocationAreaId INPN_LocationAreaId3(n) 3253 to 0xcb5 to O6
3268 0xcc4
InterSystemHandOver INPN_InterSystemHandOver3(n) 3269 to 0xcc5 to O6
3284 0xcd4
InterPLMNHandOver INPN_InterPLMNHandOver3(n) 3285 to 0xcd5 to O6
3300 0xce4
InterMSCHandOver INPN_InterMSCHandOver3(n) 3301 to 0xce5 to O6
3316 0xcf4
ChangeOfLocationAlt3 O6
Ellipsis INPN_ChangeOfLocationEllipsis3(n) 3317 to 0xcf5 to A7
3332 0xd04
ChangeOfLocation[4] O5
CellGlobalId INPN_CellGlobalId4(n) 3333 to 0xd05 to O6
3348 0xd14
ServiceAreaId INPN_ServiceAreaId4(n) 3349 to 0xd15 to O6
3364 0xd24
LocationAreaId INPN_LocationAreaId4(n) 3365 to 0xd25 to O6
3380 0xd34
InterSystemHandOver INPN_InterSystemHandOver4(n 3381 to 0xd35 to O6
3396 0xd44
InterPLMNHandOver INPN_InterPLMNHandOver4(n) 3397 to 0xd45 to O6
3412 0xd54
InterMSCHandOver INPN_InterMSCHandOver4(n) 3413 to 0xd55 to O6
3428 0xd64
ChangeOfLocationAlt4 O6
Ellipsis INPN_ChangeOfLocationEllipsis4(n) 3429 to 0xd65 to A7
3444 0xd74
ChangeOfLocation[5] O5
CellGlobalId INPN_CellGlobalId5(n) 3445 to 0xd75 to O6
3460 0xd84
ServiceAreaId INPN_ServiceAreaId5(n) 3461 to 0xd85 to O6
3476 0xd94
LocationAreaId INPN_LocationAreaId5(n) 3477 to 0xd95 to O6
3492 0xda4
InterSystemHandOver INPN_InterSystemHandOver5(n) 3493 to 0xda5 to O6
3508 0xdb4

171
5 Non-Primitive Interface

INOP_RequestReportBCSMEvent
Parameter Mnemonic Value
(dec) (hex)
InterPLMNHandOver INPN_InterPLMNHandOver5(n) 3509 to 0xdb5 to O6
3524 0xdc4
InterMSCHandOver INPN_InterMSCHandOver5(n) 3525 to 0xdc5 to O6
3540 0xdd4
ChangeOfLocationAlt5 O6
Ellipsis INPN_ChangeOfLocationEllipsis5(n) 3541 to 0xdd5 to A7
3556 0xde4
ChangeOfLocation[6] O5
CellGlobalId INPN_CellGlobalId6(n) 3557 to 0xde5 to O6
3572 0xdf4
ServiceAreaId INPN_ServiceAreaId6(n) 3573 to 0xdf5 to O6
3588 0xe04
LocationAreaId INPN_LocationAreaId6(n) 3589 to 0xe05 to O6
3604 0xe14
InterSystemHandOver INPN_InterSystemHandOver6(n) 3605 to 0xe15 to O6
3620 0xe24
InterPLMNHandOver INPN_InterPLMNHandOver6(n) 3621 to 0xe25 to O6
3636 0xe34
InterMSCHandOver INPN_InterMSCHandOver6(n) 3637 to 0xe35 to O6
3652 0xe44
ChangeOfLocationAlt6 O6
Ellipsis INPN_ChangeOfLocationEllipsis6(n) 3653 to 0xe45 to A7
3668 0xe54
ChangeOfLocation[7] O5
CellGlobalId INPN_CellGlobalId7(n) 3669 to 0xe55 to O6
3684 0xe64
ServiceAreaId INPN_ServiceAreaId7(n) 3685 to 0xe65 to O6
3700 0xe74
LocationAreaId INPN_LocationAreaId7(n) 3701 to 0xe75 to O6
3716 0xe84
InterSystemHandOver INPN_InterSystemHandOver7(n) 3717 to 0xe85 to O6
3732 0xe94
InterPLMNHandOver INPN_InterPLMNHandOver7(n) 3733 to 0xe95 to O6
3748 0xea4
InterMSCHandOver INPN_InterMSCHandOver7(n) 3749 to 0xea5 to O6
3764 0xeb4
ChangeOfLocationAlt7 O6
Ellipsis INPN_ChangeOfLocationEllipsis7(n) 3765 to 0xeb5 to A7
3780 0xec4
ChangeOfLocation[8] O5
CellGlobalId INPN_CellGlobalId8(n) 3781 to 0xec5 to O6
3796 0xed4

172
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_RequestReportBCSMEvent
Parameter Mnemonic Value
(dec) (hex)
ServiceAreaId INPN_ServiceAreaId8(n) 3797 to 0xed5 to O6
3812 0xee4
LocationAreaId INPN_LocationAreaId8(n) 3813 to 0xee5 to O6
3828 0xef4
InterSystemHandOver INPN_InterSystemHandOver8(n) 3829 to 0xef5 to O6
3844 0xf04
InterPLMNHandOver INPN_InterPLMNHandOver8(n) 3845 to 0xf05 to O6
3860 0xf14
InterMSCHandOver INPN_InterMSCHandOver8(n) 3861 to 0xf15 to O6
3876 0xf24
ChangeOfLocationAlt8 O6
Ellipsis INPN_ChangeOfLocationEllipsis8(n) 3877 to 0xf25 to A7
3892 0xf34
ChangeOfLocation[9] O5
CellGlobalId INPN_CellGlobalId9(n) 3893 to 0xf35 to O6
3908 0xf44
ServiceAreaId INPN_ServiceAreaId9(n) 3909 to 0xf45 to O6
3924 0xf54
LocationAreaId INPN_LocationAreaId9(n) 3925 to 0xf55 to O6
3940 0xf64
InterSystemHandOver INPN_InterSystemHandOver9(n) 3941 to 0xf65 to O6
3956 0xf74
InterPLMNHandOver INPN_InterPLMNHandOver9(n) 3957 to 0xf75 to O6
3972 0xf84
InterMSCHandOver INPN_InterMSCHandOver9(n) 3973 to 0xf85 to O6
3988 0xf94
ChangeOfLocationAlt9 O6
Ellipsis INPN_ChangeOfLocationEllipsis9(n) 3989 to 0xf95 to A7
4004 0xfa4
NumberOfDigits INPN_NumberOfDigits(n) 160 to 0xa0 to O4
175 0xaf
InterDigitTimeout INPN_InterDigitTimeout(n) 2869 to 0xb35 to O4
2884 0xb44
Ellipsis INPN_DpSpecCritAltEllipsis(n) A4
INPN_AutomaticRearm(n) 4005 to 0xfa5 to O2
4020 0xfb4

Extensions (see Appendix B.15 Operation Extensions on page 282) O

Ellipsis INPN_Ellipsis 112 0x70 A

173
5 Non-Primitive Interface

B.10.10 EventReportBCSM
INOP_EventReportBCSM
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
EventTypeBCSM INPN_EventTypeBCSM(0). 192 0xc0 M
See Error! Reference source not
ound.BCSM Event Codes see page 309.
EventSpecificInformationBCSM O
9
RouteSelectFailure C2
FailureCause INPN_FailureCause 94 0x5e O3
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
OcalledPartyBusy C2
BusyCause INPN_BusyCause 95 0x5f O3
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
OnoAnswer C2
--No Info--
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Oanswer C2
DestinationAddress INPN_DestinationAddr 648 0x288 O3
Or-Call INPN_OrCall 664 0x298 O3
ForwardedCall INPN_ForwardedCall 651 0x28b O3
ChargeIndicator INPN_ChargeIndicator 4182 0x1056 O3
Ext_BasicServiceCode O3
Ext_BearerServiceCode INPN_Ext_BearerServiceCode 120 0x78 C4
Ext_TeleserviceCode INPN_Ext_TeleserviceCode 121 0x79 C4
Ext_BasicServiceCode2 O3
Ext_BearerServiceCode INPN_Ext_BearerServiceCode2 2764 0xacc C4
Ext_TeleserviceCode INPN_Ext_TeleserviceCode2 2765 0xacd C4
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Omidcall C2
MidCallEvents O3
DTMFDigitsCompleted INPN_DTMFDigitsCompleted 4183 0x1057 C4
DTMFDigitsTimeOut INPN_DTMFDigitsTimeOut 4184 0x1058 C4
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Odisconnect C2
ReleaseCause INPN_ReleaseCause 96 0x60 O3

9
The event specific information formatted or recovered is dependent on the value of INPN_EventTypeBCSM(0). For
example, if its value is Tdisconnect, then the format procedures will use the parameter INPN_ReleaseCause.
174
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_EventReportBCSM
Parameter Mnemonic Value
(dec) (hex)
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
TcalledPartyBusy C2
BusyCause INPN_BusyCause 95 0x5f O3
CallForwarded INPN_CallForwarded 639 0x27f O3
RouteNotPermitted INPN_RouteNotPermitted 753 0x2f1 O3
ForwardingDestinationNumber INPN_forwardingDestinationNumber 4185 0x1059 O3
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
TnoAnswer C2
CallForwarded INPN_CallForwarded 639 0x27f O3
ForwardingDestinationNumber INPN_forwardingDestinationNumber 4185 0x1059 O3
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Tanswer C2
DestinationAddress INPN_DestinationAddr 648 0x288 O3
Or-Call INPN_OrCall 664 0x298 O3
ForwardedCall INPN_ForwardedCall 651 0x28b O3
ChargeIndicator INPN_ChargeIndicator 4182 0x1056 O3
Ext_BasicServiceCode O3
Ext_BearerServiceCode INPN_Ext_BearerServiceCode 120 0x78 C4
Ext_TeleserviceCode INPN_Ext_TeleserviceCode 121 0x79 C4
Ext_BasicServiceCode2 O3
Ext_BearerServiceCode INPN_Ext_BearerServiceCode2 2764 0xacc C4
Ext_TeleserviceCode INPN_Ext_TeleserviceCode2 2765 0xacd C4
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Tmidcall C2
MidCallEvents O3
DTMFDigitsCompleted INPN_DTMFDigitsCompleted 4183 0x1057 C4
DTMFDigitsTimeOut INPN_DTMFDigitsTimeOut 4184 0x1058 C4
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Tdisconnect C2
ReleaseCause INPN_ReleaseCause 96 0x60 O3
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
OtermSeized C2
LocationInformation (see LocationInformation (sub-table) on page 139) O3
O4
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3

175
5 Non-Primitive Interface

INOP_EventReportBCSM
Parameter Mnemonic Value
(dec) (hex)
CallAccepted C2
LocationInformation (see LocationInformation (sub-table) on page 139) O3
O4
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Oabandon C2
RouteNotPermitted INPN_RouteNotPermitted 753 0x2f1 O3
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
OchangeOfPosition C2
LocationInformation (see LocationInformation (sub-table) on page 139) O3
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
10
MetDPCriteriaList (SEQUENCE, size = 1 to 10) O3
EnteringCellGlobalId INPN_EnteringCellGlobalId(n) 4053 to 0xfd5 to C4
4062 0xfde
LeavingCellGlobalId INPN_LeavingCellGlobalId(n) 4063 to 0xfdf to C4
4072 0xfe8
EnteringServiceAreaId INPN_EnteringServiceAreaId(n) 4073 to 0xfe9 to C4
4082 0xff2
LeavingServiceAreaId INPN_LeavingServiceAreaId(n) 4083 to 0xff3 to C4
4092 0xffc
EnteringLocationAreaId INPN_EnteringLocationAreaId(n) 4093 to 0xffd to C4
4102 0x1006
LeavingLocationAreaId INPN_LeavingLocationAreaId(n) 4103 to 0x1007 to C4
4112 0x1010
InterSystemHandOverToUMTS INPN_InterSystemHandOverToUMTS(n) 4113 to 0x1011 to C4
4122 0x101a
InterSystemHandOverToGSM INPN_InterSystemHandOverToGSM(n) 4123 to 0x101b to C4
4132 0x1024
InterPLMNHandOver INPN_InterPLMNHandOver(n) 4133 to 0x1025 to C4
4142 0x102e
InterMSCHandOver INPN_InterMSCHandOver(n) 4143 to 0x102f to C4
4152 0x1038
MetDPCriterionAlt C4
Ellipsis INPN_MetDPCriterion_Ellipsis(n) 4153 to 0x1039 to A5
4162 0x1042
TchangeOfPosition C2
LocationInformation (see LocationInformation (sub-table) on page 139) O3
O4
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3

10
For MetDPCriteriaList, each of the up to 10 instances may use any of the parameters listed after it.
176
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_EventReportBCSM
Parameter Mnemonic Value
(dec) (hex)
MetDPCriteriaList – defined as above O3
DpSpecificInfoAlt (default match) C2
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
oServiceChangeSpecificInfo O3
Ext_BasicServiceCode O4
Ext_BearerServiceCode INPN_Ext_BearerServiceCode 120 0x78 C5
Ext_TeleserviceCode INPN_Ext_TeleserviceCode 121 0x79 C5
Ellipsis INPN_oServiceChargeInfo_Ellipsis 4222 0x107e A4
InitiatorOfServiceCharge INPN_oInitiatorOfServiceCharge 4224 0x1080 O4
NatureOfServiceCharge INPN_oNatureOfServiceCharge 4226 0x1082 O4
tServiceChangeSpecificInfo O3
Ext_BasicServiceCode O4
Ext_BearerServiceCode INPN_Ext_BearerServiceCode_tServChng 4180 0x1054 C5
Ext_TeleserviceCode INPN_Ext_TeleserviceCode_tServChng 4181 0x1055 C5
Ellipsis INPN_tServiceChargeInfo_Ellipsis 4223 0x107f A4
InitiatorOfServiceCharge INPN_tInitiatorOfServiceCharge 4225 0x1081 O4
NatureOfServiceCharge INPN_tNatureOfServiceCharge 4227 0x1083 O4
collectedInfoSpecificInfo O3
CalledPartyNumber INPN_CalledPartyNumber 5 0x05 O4
Ellipsis INPN_CollectedInfo_Ellipsis 4221 0x107d A4
LegID O
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 O2
MiscCallInfo O
MessageType INPN_MessageType 56 0x38 O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.11 CollectInformation
INOP_CollectInformation
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M

177
5 Non-Primitive Interface

B.10.12 Continue
INOP_Continue
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M

B.10.13 InitiateCallAttempt
INOP_InitiateCallAttempt
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
DestinationRoutingAddress INPN_DestinationRoutingAddress(0) 27 0x1b M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
LegToBeCreated O
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
NewCallSegment INPN_NewCallSegment(0) 1036 0x40c O
CallingPartyNumber INPN_CallingPartyNumber 6 0x06 O
CallReferenceNumber INPN_CallReferenceNumber 131 0x83 O
GsmSCFAddress INPN_GsmSCFAddress 4186 0x105a O
Suppress-T-CSI INPN_SuppressTCSI 4187 0x105b O
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.14 ResetTimer
INOP_ResetTimer
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
TimerID INPN_TimerID 61 0x3d D
Default = tssf (0)

TimerValue INPN_TimerValue 62 0x3e M

Extensions (see Appendix B.15 Operation Extensions on page 282) O
CallSegmentID INPN_CallSegmentID 320 0x140 O
Ellipsis INPN_Ellipsis 112 0x70 A

178
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.10.15 FurnishChargingInformation
INOP_FurnishChargingInformation
Parameter Mnemonic Value
(dec) (hex)
InvokeId INPN_InvokeId 1 0x01 M
FCIBCCCAMELsequence1 M
FreeFormatData INPN_FreeFormData 319 0x13f M2
PartyToCharge O2
SendingSideID INPN_SendingSideID(0) 224 0xe0 O3
AppendFreeFormatData INPN_AppendFreeFormData 637 0x27d D2
Default = overwrite(0)

B.10.16 ApplyCharging
INOP_ApplyCharging
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
AChBillingChargingCharacteristics M
TimeDurationCharging M2
MaxCallPeriodDuration INPN_MaxCallPeriodDuration 159 0x9f M3
ReleaseIfDuration Exceeded INPN_ReleaseIfDurExceeded 750 0x2ee D3
Default = FALSE
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O3
AudibleIndicator O3
Tone INPN_AudibleIndicTone 4214 0x1076 C4
BurstListO3 C4
WarningPeriod INPN_warningPeriod 4213 0x1075 D5
Default = 30
Burst O5
NumberOfBursts INPN_numberOfBursts 4193 0x1061 D6
Default = 1
BurstInterval INPN_burstInterval 4194 0x1062 D6
Default = 2
NumberOfTonesInBurst INPN_numberOfTonesInBurst 4195 0x1063 D6
Default = 3
ToneDuration INPN_toneDuration 4196 0x1064 D6
Default = 2
ToneInterval INPN_toneInterval 4197 0x1065 D6
Default = 2
Ellipsis INPN_BurstEllipsis 4211 0x1073 A6
179
5 Non-Primitive Interface

INOP_ApplyCharging
Parameter Mnemonic Value
(dec) (hex)
Ellipsis INPN_BurstListEllipsis 4212 0x1074 A5
Extensions2 (see Appendix B.15 Operation Extensions on page 282) O3
Ellipsis INPN_TmDurChar_Ellipsis 1374 0x55e A3
PartyToCharge O
SendingSideID INPN_SendingSideID(0) 224 0xe0 O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
AChChargingAddress O
LegID C2
SendingSideID INPN_SendingSideID(1) 225 0xe1 C3
ReceivingSideID INPN_ReceivingSideID(1) 241 0xf1 C3
SrfConnection INPN_SrfConnection 2786 0xae2 C2
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.17 ApplyChargingReport
INOP_ApplyChargingReport
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
CallResult M
TimeDurationChargingResult M2
PartyToCharge M3
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 M4
TimeInformation M3
TimeIfNoTariffSwitch INPN_TmIfNoTariffSwch 776 0x308 C4
TimeIfTariffSwitch C4
TimeSinceTariffSwitch INPN_TmSinceTariffSwch 777 0x309 M5
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O5
LegActive INPN_LegActive 4215 0x1077 D3
Default = TRUE
CallLegReleasedAtTcpExpiry INPN_CallReleasedAtTcpExp 640 0x280 O3
Extensions (see Appendix B.15 Operation Extensions on page 282) O3
AChChargingAddress O3
LegID C4
SendingSideID INPN_SendingSideID(1) 225 0xe1 C5
ReceivingSideID INPN_ReceivingSideID(1) 241 0xf1 C5

180
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_ApplyChargingReport
Parameter Mnemonic Value
(dec) (hex)
SrfConnection INPN_SrfConnection 2786 0xae2 C4
Ellipsis INPN_TmDurCharRes_Ellipsis 112 0x70 A3

B.10.18 CallGap
INOP_CallGap
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
GapCriteria M
BasicGapCriteria C2
CalledAddressAndService C3
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M4
ServiceKey INPN_ServiceKey 3 0x03 M4
Ellipsis INPN_CldAddrServ_Ellipsis 1398 0x576 A4
CallingAddressAndService C3
CallingAddressValue INPN_CallingAddressValue 99 0x63 M4
ServiceKey INPN_ServiceKey 3 0x03 M4
Ellipsis INPN_ClgAddrServ_Ellipsis 1400 0x578 A4
GapOnService C3
ServiceKey INPN_ServiceKey 3 0x03 M4
Ellipsis INPN_GapOnServ_Ellipsis 1401 0x579 A4
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 C3
CompoundGapCriteria C2
CompoundBasicGapCriteria M3
CompoundCalledAddressAndService C4
CalledAddressValue INPN_ComCalledAddressValue 894 0x37e M5
ServiceKey INPN_ComServiceKey 893 0x37d M5
Ellipsis INPN_CldAddrServ_Ellipsis 1398 0x576 A5
CompoundCallingAddressAndService C4
CallingAddressValue INPN_CallingAddressValue 99 0x63 M5
ServiceKey INPN_ComServiceKey 893 0x37d M5
Ellipsis INPN_ClgAddrServ_Ellipsis 1400 0x578 A5
CompoundGapOnService C4
ServiceKey INPN_ComServiceKey 893 0x37d M5
Ellipsis INPN_GapOnServ_Ellipsis 1401 0x579 A5

181
5 Non-Primitive Interface

INOP_CallGap
Parameter Mnemonic Value
(dec) (hex)
CalledAddressValue INPN_ComCalledAddressValue 894 0x37e C4
ScfID INPN_ScfID 38 0x26 O3
GapIndicators M
GapDuration INPN_Gap_Duration 72 0x48 M2
GapInterval INPN_GapInterval 73 0x49 M2
Ellipsis INPN_GapInd_Ellipsis 1411 0x583 A2
ControlType INPN_ControlType 101 0x65 O
GapTreatment O
InformationToSend (see InformationToSend (Sub-table) on page 100) C2
O3
ReleaseCause INPN_ReleaseCause 96 0x60 C2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.19 CallInformationReport
INOP_CallInformationReport
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
RequestedInformationList (SEQUENCE, size = 1 to 4) M
RequestedInformationType INPN_RequestedInformationType(n) 288 to 0x120 to M2
291 0x123
RequestedInformationValue M2
CallAttemptEllapsedTimeValue INPN_CallAttemptEllapsedTimeValue(n) 293 to 0x125 to C3
296 0x128

CallStopTimeValue INPN_CallStopTimeValue(n) 298 to 0x12a to C3

301 0x12d

CallConnectedElapsedTimeValue INPN_CallConnectedElapsedTimeValue(n) 303 to 0x12f to C3

306 0x132

ReleaseCauseValue INPN_ReleaseCauseValue(n) 313 to 0x139 to C3

316 0x13c

Ellipsis INPN_ReqInfo_Ellipsis(n) 1376 to 0x560 to A2

1379 0x563
Extensions (see Appendix B.15 Operation Extensions on page 282) O

182
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_CallInformationReport
Parameter Mnemonic Value
(dec) (hex)
LegID O
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 O2
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.20 CallInformationRequest
INOP_CallInformationReport
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
RequestedInformationReport (SEQUENCE, size = 1 to 4) M
RequestedInformation INPN_RequestedInformationType(n) 288 to 0x120 to M2
Type 291 0x123
Extensions (see Appendix B.15 Operation Extensions on page 282) O
LegID O
SendingSideID INPN_SendingSideID(0) 224 0xe0 O2
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.21 SendChargingInformation
INOP_SendChargingInformation
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
CAMEL-SCIBillingChargingCharacteristics M
AOCBeforeAnswer11 C2
AOCInitial M3
E1 INPN_Initial_CAI_E1 144 0x90 O4
E2 INPN_Initial_CAI_E2 145 0x91 O4
E3 INPN_Initial_CAI_E3 146 0x92 O4
E4 INPN_Initial_CAI_E4 147 0x93 O4
E5 INPN_Initial_CAI_E5 148 0x94 O4
E6 INPN_Initial_CAI_E6 149 0x95 O4
E7 INPN_Initial_CAI_E7 150 0x96 O4

11
The parameters INPN_CAMEL_AOC_BeforeAnswer and INPN_CAMEL_AOC_AfterAnswer are used to determine if the AOC
is for before or after answer. If present, AOCBeforeAnswer or AOCAfterAnswer will be sent, otherwise the AOC-Extension
will be sent. The parameters are not formatted or decoded and may be of any value.
183
5 Non-Primitive Interface

INOP_SendChargingInformation
Parameter Mnemonic Value
(dec) (hex)
AOCSubsequent O3
CAI-GSM0224 M4
E1 INPN_Subsequent_CAI_E1 151 0x97 O5
E2 INPN_Subsequent_CAI_E2 152 0x98 O5
E3 INPN_Subsequent_CAI_E3 153 0x99 O5
E4 INPN_Subsequent_CAI_E4 154 0x9a O5
E5 INPN_Subsequent_CAI_E5 155 0x9b O5
E6 INPN_Subsequent_CAI_E6 156 0x9c O5
E7 INPN_Subsequent_CAI_E7 157 0x9d O5
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O4
12
AOCAfterAnswer C2
AOCSubsequent O3
CAI-GSM0224 M4
E1 INPN_Subsequent_CAI_E1 151 0x97 O5
E2 INPN_Subsequent_CAI_E2 152 0x98 O5
E3 INPN_Subsequent_CAI_E3 153 0x99 O5
E4 INPN_Subsequent_CAI_E4 154 0x9a O5
E5 INPN_Subsequent_CAI_E5 155 0x9b O5
E6 INPN_Subsequent_CAI_E6 156 0x9c O5
E7 INPN_Subsequent_CAI_E7 157 0x9d O5
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O4
AOC-Extension (CAMEL-SCIBillingChargingCharacteristicsAlt)24 C2
Ellipsis INPN_SCIBCCAlt_Ellipsis 4218 0x107a A3
PartyToCharge M
SendingSideID INPN_SendingSideID(0) 224 0xe0 M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

12
The parameters INPN_CAMEL_AOC_BeforeAnswer and INPN_CAMEL_AOC_AfterAnswer are used to determine if the AOC
is for before or after answer. If present, AOCBeforeAnswer or AOCAfterAnswer will be sent, otherwise the AOC-Extension
will be sent. The parameters are not formatted or decoded and may be of any value.
184
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.10.22 PlayAnnouncement
INOP_PlayAnnouncement
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
InformationToSend (see InformationToSend (Sub-table) on page 100) M
M2
DisconnectFromIP Forbidden INPN_DisconnectFromIP Forbidden 59 0x3b D
Default = TRUE
RequestAnnouncement INPN_RequestAnnouncement 60 0x3c D
CompleteNotification Complete
Default = TRUE
Extensions (see Appendix B.15 Operation Extensions on page 282) O
CallSegmentID INPN_CallSegmentID 320 0x140 O
RequestAnnouncementStartedNotification INPN_RequestAnnouncementStarted 4189 0x105d D
Default - FALSE
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.23 PromptAndCollectUserInformation
INOP_ PromptAndCollectUserInformation
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
CollectedInfo M
CollectedDigits M2
MinimumNbOfDigits INPN_MinimumNumberOfDigits 74 0x4a D3
Default = 1
MaximumNbOf Digits INPN_MaximumNumberOfDigits 75 0x4b M3
EndOfReplyDigit INPN_EndOfReplyDigit 76 0x4c O3
CancelDigit INPN_CancelDigit 77 0x4d O3
StartDigit INPN_StartDigit 78 0x4e O3
FirstDigitTimeOut INPN_FirstDigitTimeOut 79 0x4f O3
InterDigitTimeOut INPN_InterDigitTimeOut 80 0x50 O3
ErrorTreatment INPN_Errortreatment 81 0x51 D3
Default: = StfErrorAndInfo
InterruptableAndInd INPN_InterruptableAnnInd 82 0x52 D3
Default = TRUE
VoiceInformation INPN_VoiceInformation 83 0x53 D3
Default = FALSE

185
5 Non-Primitive Interface

INOP_ PromptAndCollectUserInformation
Parameter Mnemonic Value
(dec) (hex)
VoiceBack INPN_VoiceBack 84 0x54 D3
Default = FALSE
DisconnectFromIP Forbidden INPN_DisconnectFromIPForbidden 59 0x3b D
Default = TRUE
InformationToSend (see InformationToSend (Sub-table) on page 100) O
O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
CallSegmentID INPN_CallSegmentID 320 0x140 O
RequestAnnouncementStartedNotification INPN_RequestAnnouncementStarted 4189 0x105d D
Default - FALSE
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.24 SpecializedResourceReport
INOP_ SpecializedResourceReport
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
LinkedID INPN_LinkedID 2 0x02 O
AllAnnouncementsComplete INPN_AllAnnouncementsComplete 4190 0x105e C
FirstAnnouncementStarted INPN_FirstAnnouncementStarted 4191 0x105f C

B.10.25 Cancel
INOP_Cancel
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
Cancel_InvokeID INPN_Cancel_InvokeID 86 0x56 C
AllRequests INPN_CancelAllRequests 4219 0x107b C
CallSegmentToCancel C
Cancel_InvokeID INPN_Cancel_InvokeID 86 0x56 O2
CallSegmentID INPN_CallSegmentID 320 0x140 O2
Ellipsis INPN_CallSegToCancelEllipsis 4210 0x1072 A2

186
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.10.26 ActivityTest
INOP_ ActivityTest
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M

B.10.27 ContinueWithArg
INOP_ ContinueWithArgument
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
AlertingPattern INPN_AlertingPattern 30 0x1e O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ServiceInteractionIndicatorsTwo O
(see ServiceInteractionIndicatorsTwo (sub-table) on page 138)
O2
CallingPartysCategory INPN_CallingPartysCategory 8 0x08 O
GenericNumbers (SET, size = 1 to 5) O
GenericNumber INPN_GenericNumber(n) 67 to 0x43 to O2
71 0x47
CUG_Interlock INPN_CUG_Interlock 645 0x285 O
CUG_OutgoingAccess INPN_CUG_OutgoingAccess 646 0x286 O
ChargeNumber INPN_ChargeNumber 642 0x282 O
Carrier INPN_Carrier 40 0x28 O
SuppressionOfAnnouncement INPN_SuppressionOfAnnouncement 109 0x6d O
NAOliInfo INPN_NAOliInfo 141 0x8d O
BorInterrogationRequested INPN_BorInterrogationRequested 2787 0xae3 O
Suppress-O-CSI INPN_SuppressOCSI 4200 0x1068 O
ContinueWithArgumentArgExtension O
Suppress-D-CSI INPN_SuppressDCSI 4198 0x1066 O2
Suppress-N-CSI INPN_SuppressNCSI 2788 0xae4 O2
SuppressOutgoingCallBarring INPN_SuppressOutgoingCallBarring 4199 0x1067 O2
LegOrCallSegment O2
CallSegmentID INPN_CallSegmentID 320 0x140 C3
LegId C3
SendingSideID INPN_SendingSideID(0) 224 0xe0 C4
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C4
Ellipsis INPN_ContinueWithArgumentExtensionEllipsis 4209 0x1071 A2
Ellipsis INPN_Ellipsis 112 0x70 A

187
5 Non-Primitive Interface

B.10.28 DisconnectLeg
INOP_DisconnectLeg
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
LegToBeReleased M
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
ReleaseCause INPN_ReleaseCause 96 0x60 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.29 MoveLeg
INOP_MoveLeg
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
LegIDToMove M
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.30 SplitLeg
INOP_SplitLeg
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
LegToBeSplit M
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
NewCallSegment INPN_NewCallSegment(0) 1036 0x40c O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

188
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.10.31 EntityReleased
INOP_EntityReleased
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
CallSegmentFailure C
CallSegmentID INPN_CallSegmentID 320 0x140 O2
Cause INPN_Cause 41 0x29 O2
Ellipsis INPN_CallSegmentFailure_Ellipsis 4192 0x1060 A2
BCSMFailure C
LegId O2
SendingSideID INPN_SendingSideID(0) 224 0xe0 C3
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C3
Cause INPN_BCSMCause 4208 0x1070 O2
Ellipsis INPN_BCSMFailure_Ellipsis 946 0x3b2 A2

B.10.32 PlayTone
INOP_PlayTone
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
LegOrCallSegment M
CallSegmentID INPN_CallSegmentID 320 0x140 C2
LegId C2
SendingSideID INPN_SendingSideID(0) 224 0xe0 C3
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C3
Burst M
NumberOfBursts INPN_numberOfBursts 4193 0x1061 D2
Default = 1
BurstInterval INPN_burstInterval 4194 0x1062 D2
Default = 2
NumberOfTonesInBurst INPN_numberOfTonesInBurst 4195 0x1063 D2
Default = 3
ToneDuration INPN_toneDuration 4196 0x1064 D2
Default = 2
ToneInterval INPN_toneInterval 4197 0x1065 D2
Default = 2
Ellipsis INPN_BurstEllipsis 4211 0x1073 A2

189
5 Non-Primitive Interface

INOP_PlayTone
Parameter Mnemonic Value
(dec) (hex)
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.33 InitialDPSMS
INOP_InitialDPSMS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
Servicekey INPN_ServiceKey 3 0x03 O
DestinationSubscriber Number INPN_DestSubscriberNumber 649 0x289 O
CallingPartyNumber INPN_CallingPartyNumberSMS 4188 0x105c O
EventTypeSMS INPN_EventTypeSMS(0) 861 0x35d O
IMSI INPN_IMSI 130 0x82 O
LocationInformation (see LocationInformation (sub-table) on page 139) O
O2
LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 152) O
O2
SMSCAddress INPN_SMSCAddress 768 0x300 O
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf O
TPShortMessage SpecificInfo INPN_TPShtMsgSubInfo 781 0x30d O
TPProtocolIdentifier INPN_TPProtocolID 780 0x30c O
TPDataCodingScheme INPN_TPDataCodingScheme 779 0x30b O
TPValidityPeriod INPN_TPValidityPeriod 782 0x30e O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
SMSReferenceNumber INPN_SMSReferenceNumber 770 0x302 O
MSCAddress INPN_MSCAddress 132 0x84 O
SGSN Number INPN_SGSNNumber 767 0x2ff O
MS-ClassMark2 INPN_MSClassMark2 2777 0xad9 O
GPRSMSClass O
MSNetworkCapability INPN_MSNetworkCapability 661 0x295 O2
MSRadioAccessCapability INPN_MSRadioAccessCapability 662 0x296 O2
IMEI INPN_IMEI 2778 0xada O
CalledPartyNumber INPN_CalledPartyNumber 5 0x05 O
Ellipsis INPN_Ellipsis 112 0x70 A

190
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.10.34 FurnishChargingInformationSMS
INOP_FurnishChargingInformationSMS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
FCIBCCCAMELsequence1 M
FreeFormatData INPN_FreeFormData 319 0x13f M2
AppendFreeFormatData INPN_AppendFreeFormData 637 0x27d D2
Default = overwrite (0)

B.10.35 Connect SMS

INOP_ConnectSMS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
CallingPartysNumber INPN_CallingPartyNumberSMS 4188 0x105c O
DestinationSubscriber Number INPN_DestSubscriberNumber 649 0x289 O
SMSCAddress INPN_SMSCAddress 768 0x300 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.36 RequestReportSMSEvent
INOP_RequestReportSMSEvent
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
SMSEvents (SEQUENCE, size = 1 to 10) M
EventTypeSMS INPN_EventTypeSMS(n) 861 to 870 0x35d to 0x366 M2
MonitorMode INPN_MonitorMode(n) 208 to 217 0xd0 to 0xd9 M2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

191
5 Non-Primitive Interface

B.10.37 EventReportSMS
INOP_EventReportSMS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
EventTypeSMS INPN_EventTypeSMS(0) 861 0x35d M
See SMS Event Codes below
EventSpecificInformationSMS O
13
O-SMSFailureSpecificInfo C2
FailureCause INPN_SMSCause 769 0x301 M3
Ellipsis INPN_EventSpecInfoSMS_Ellipsis 1371 0x55b A3
O-SMSSubmittedSpecificInfo C2
--No Info--
Ellipsis INPN_EventSpecInfoSMS_Ellipsis 1371 0x55b A3
T-SMSFailureSpecificInfo C2
FailureCause INPN_MT_SMSCause 2772 0xad4 M3
Ellipsis INPN_EventSpecInfoSMS_Ellipsis 1371 0x55b A3
T-SMSDeliverySpecificInfo C2
--No Info--
Ellipsis INPN_EventSpecInfoSMS_Ellipsis 1371 0x55b A3
MiscCallInfo O
MessageType INPN_MessageType 56 0x38 D2
Default = request
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

SMS Event Codes

The SMS Event Codes are listed in the following table.

Event Name Event Code

INEVS_SMSCollectedInfo 1
INEVS_oSMSFailure 2
INEVS_oSMSSubmitted 3
INEVS_SMSDeliveryRequested 11
INEVS_tSMSFailure 12
INEVS_tSMSDelivery 13

13
The event-specific information formatted or recovered is dependent on the value of INPN_EventTypeSMS(0).
192
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.10.38 ContinueSMS
INOP_ContinueSMS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M

B.10.39 ReleaseSMS
INOP_ReleaseSMS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
RPCause INPN_RPCause 762 0x2fa M

B.10.40 ResetTimerSMS
INOP_ResetTimerSMS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
TimerID INPN_TimerID 61 0x3d D
Default = tssf (0)
TimerValue INPN_TimerValue 62 0x3e M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.41 ActivityTestGPRS
INOP_ActivityTestGPRS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M

B.10.42 ApplyChargingGPRS
INOP_ApplyChargingGPRS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
ChargingCharacteristics M
MaxTransferredVolume INPN_MaxTransferredVol 659 0x293 C2

193
5 Non-Primitive Interface

INOP_ApplyChargingGPRS
Parameter Mnemonic Value
(dec) (hex)
MaxElapsedTime INPN_MaxElapsedTime 658 0x292 C2
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O
PDPID INPN_PDPID 665 0x299 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.43 ApplyChargingReportGPRS
INOP_ApplyChargingReportGPRS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
ChargingResult M
TransferredVolume C2
VolumeIfNoTariffSwitch INPN_VolIfNoTariffSwch 785 0x311 C3
VolumeIfTariffSwitch C3
VolumeSinceLastTariff Switch INPN_VolLastTariffSwch 783 0x30f M4
VolumeTariffSwitch Interval INPN_VolTariffSwchInt 784 0x310 O4
ElapsedTime C2
TimeGPRSIfNoTariff Switch INPN_TmGPRSIfNoTariffSwch 776 0x308 C3
TimeGPRSIfTariffSwitch C3
TimeGPRSSinceLast INPN_TmGPRSSinceLast¶TariffSwch 774 0x306 M4
TariffSwitch
TimeGPRSTariffSwitch Interval INPN_TmGPRSTariffSwchInt 775 0x307 O4
QualityOfService (see CAMEL v4 QualityOfService (sub-table) on page 195) O
O2
Active INPN_Active 636 0x27c D
Default = TRUE
PDPID INPN_PDPID 665 0x299 O
ChargingRollOver O
TransferredVolumeRollOver C2
Ro-VolumeIfNoTariff Switch INPN_RO_VolIfNoTariffSwch 761 0x2f9 C3
Ro-VolumeIfTariffSwitch C3
Ro-VolumeSinceLast INPN_RO_VolLastTariffSwch 759 0x2f7 M4
TariffSwitch
Ro-VolumeTariffSwitch Interval INPN_RO_VolTariffSwchInt 760 0x2f8 O4
ElapsedTimeRollOver C2
Ro-TimeGPRSIfNoTariff Switch INPN_RO_TmGPRSNoTariffSwch 756 0x2f4 C3

194
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_ApplyChargingReportGPRS
Parameter Mnemonic Value
(dec) (hex)
Ro-TimeGPRSIfTariffSwitch C3
Ro-TimeGPRSSinceLast INPN_RO_TmGPRSLastTariffSwch 757 0x2f5 O4
TariffSwitch
Ro-TimeGPRSTariff INPN_RO_TmGPRSTariffSwchInt 758 0x2f6 O4
SwitchInterval
Ellipsis INPN_Ellipsis 112 0x70 A

CAMEL v4 QualityOfService (sub-table)

QualityOfService
Parameter Mnemonic Value
(dec) (hex)
Requested-QoS O
Short-QoS-Format INPN_ReqShtQoSFormat 751 0x2ef C2
Long-QoS-Format INPN_ReqLngQoSFormat 752 0x2f0 C2
Subscribed-QoS O
Short-QoS-Format INPN_SubShtQoSFormat 771 0x303 C2
Long-QoS-Format INPN_SubLngQoSFormat 772 0x304 C2
Negotiated-QoS O
Short-QoS-Format INPN_NegShtQoSFormat 746 0x2ea C2
Long-QoS-Format INPN_NegLngQoSFormat 747 0x2eb C2
Ellipsis INPN_QoS_Ellipsis 1370 0x55a A
Requested-QoS-Extension O
SupplementToLongQoSFormat INPN_ReqSupToLongQoSFormat 4202 0x106a O2
Ellipsis INPN_ReqGPRSQoSExt_Ellipsis 4203 0x106b A2
Subscribed-QoS-Extension O
SupplementToLongQoSFormat INPN_SubSupToLongQoSFormat 4204 0x106c O2
Ellipsis INPN_SubGPRSQoSExt_Ellipsis 4205 0x106d A2
Negotiated-QoS-Extension O
SupplementToLongQoSFormat INPN_NegSupToLongQoSFormat 4206 0x106e O2
Ellipsis INPN_NegGPRSQoSExt_Ellipsis 4207 0x106f A2

B.10.44 CancelGPRS
INOP_CancelGPRS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
195
5 Non-Primitive Interface

INOP_CancelGPRS
PDPID INPN_PDPID 665 0x299 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.45 ConnectGPRS
INOP_ConnectGPRS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
AccessPointName INPN_AccessPtName 592 0x250 M
PDPID INPN_PDPID 665 0x299 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.46 ContinueGPRS
INOP_ContinueGPRS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
PDPID INPN_PDPID 665 0x299 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.47 EntityReleasedGPRS
INOP_EntityReleasedGPRS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
GPRSCause INPN_GPRSCause 654 0x28e M
PDPID INPN_PDPID 665 0x299 O
Ellipsis INPN_Ellipsis 112 0x70 A

196
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.10.48 FurnishChargingInformationGPRS
INOP_FurnishChargingInformationGPRS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
FCIBCCCAMELsequence1 M
FreeFormatData INPN_FreeFormData 319 0x13f M2
PDPID INPN_PDPID 665 0x299 O2
AppendFreeFormatData INPN_AppendFreeFormData 637 0x27d D2
Default = overwrite (0)
Ellipsis INPN_FCIGPRSseq_Ellipsis 1367 0x557 A2

B.10.49 InitialDPGPRS
INOP_InitialDPGPRS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
Servicekey INPN_Servicekey 3 0x03 M
GPRSEventType INPN_GPRSEventType(0) 877 0x36d M
MSISDN INPN_MSISDN 660 0x294 M
IMSI INPN_IMSI 130 0x82 M
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf M
GPRSMSClass O
MSNetworkCapability INPN_MSNetworkCapability 661 0x295 M2
MSRadioAccess Capability INPN_MSRadioAccess¶Capability 662 0x296 O2
EndUserAddress O
PDPTypeOrganization INPN_PDPTypeOrganization 749 0x2ed M2
PDPTypeNumber INPN_PDPTypeNumber 748 0x2ec M2
PDPAddress INPN_PDPAddress 666 0x29a O2
QualityOfService (see CAMEL v4 QualityOfService (sub-table) on page 195) O
O2
AccessPointName INPN_AccessPtName 592 0x250 O
RoutingAreaIdentity INPN_RoutingAreaID 754 0x2f2 O
ChargingID INPN_ChargingID 643 0x283 O
SGSNCapabilities INPN_SGSNCapabilities 766 0x2fe O
LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 152) O
O2
PDPInitiationType INPN_PDPInitiationType 667 0x29b O

197
5 Non-Primitive Interface

INOP_InitialDPGPRS
Parameter Mnemonic Value
(dec) (hex)
Extensions (see Appendix B.15 Operation Extensions on page 282) O
GGSNAddress INPN_GGSNAddress 652 0x28c O
SecondaryPDP-Context INPN_SecondaryPDPContext 764 0x2fc O
IMEI INPN_IMEI 2778 0xada O
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.50 ReleaseGPRS
INOP_ReleaseGPRS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
GPRSCause INPN_GPRSCause 654 0x28e M
PDPID INPN_PDPID 665 0x299 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.51 EventReportGPRS
INOP_EventReportGPRS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
GPRSEventType INPN_GPRSEventType(0) 877 0x36d M
See GPRS Event Codes on page 200
MiscCallInfo O
MessageType INPN_MessageType 56 0x38 D2
Default = request(0)
GPRSEventSpecificInformation O
14
AttachChangeOfPositionSpecificInformation C2
LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 152) O3
O4
Ellipsis INPN_EventSpecInfoGPRS_Ellipsis 1372 0x55c A3
PDP-ContextChangeOfPositionSpecificInformation C2
AccessPointName INPN_AccessPtName 592 0x250 O3
GPRSChargingID INPN_GPRSChargingID 655 0x28f O3
LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 152) O3

14
The event specific information formatted or recovered is dependent on the value of INPN_GPRSEventType(0).
198
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_EventReportGPRS
Parameter Mnemonic Value
(dec) (hex)
O4
EndUserAddress O3
PDPTypeOrganisation INPN_PDPTypeOrganisation 749 0x2ed M4
PDPTypeNumber INPN_PDPTypeNumber 748 0x2ec M4
PDPAddress INPN_PDPAddress 666 0x29a O4
QualityOfService (see CAMEL v4 QualityOfService (sub-table) on page 195) O3
O4
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf O3
Ellipsis INPN_EventSpecInfoGPRS_Ellipsis 1372 0x55c A3
GGSNAddress INPN_GGSNAddress 652 0x28c O3
DetachSpecificInformation C2
InitiatingEntity INPN_InitiatingEntity 942 0x3ae O3
Ellipsis INPN_EventSpecInfoGPRS_Ellipsis 1372 0x55c A3
RoutingAreaUpdate INPN_RoutingAreaUpdate 755 0x2f3 O3
DisconnectSpecificInformation C2
InitiatingEntity INPN_InitiatingEntity 942 0x3ae O3
Ellipsis INPN_EventSpecInfoGPRS_Ellipsis 1372 0x55c A3
RoutingAreaUpdate INPN_RoutingAreaUpdate 755 0x2f3 O3
PDPContextEstablishmentSpecificInformation C2
AccessPointName INPN_AccessPtName 592 0x250 O3
EndUserAddress O3
PDPTypeOrganisation INPN_PDPTypeOrganisation 749 0x2ed M4
PDPTypeNumber INPN_PDPTypeNumber 748 0x2ec M4
PDPAddress INPN_PDPAddress 666 0x29a O4
QualityOfService (see CAMEL v4 QualityOfService (sub-table) on page 195) O3
O4
LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 152) O3
O4
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf O3
PDPInitiationType INPN_PDPInitiationType 667 0x29b O3
Ellipsis INPN_EventSpecInfoGPRS_Ellipsis 1372 0x55c A3
SecondaryPDP-Context INPN_SecondaryPDPContext 764 0x2fc O3
PDPContextEstablishmentAcknowledgementSpecificInformation C2
AccessPointName INPN_AccessPtName 592 0x250 O3
GPRSChargingID INPN_GPRSChargingID 655 0x28f O3

199
5 Non-Primitive Interface

INOP_EventReportGPRS
Parameter Mnemonic Value
(dec) (hex)
EndUserAddress O3
PDPTypeOrganisation INPN_PDPTypeOrganisation 749 0x2ed M4
PDPTypeNumber INPN_PDPTypeNumber 748 0x2ec M4
PDPAddress INPN_PDPAddress 666 0x29a O4
QualityOfService (see CAMEL v4 QualityOfService (sub-table) on page 195) O3
O4
LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 152) O3
O4
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf O3
Ellipsis INPN_EventSpecInfoGPRS_Ellipsis 1372 0x55c A3
GGSNAddress INPN_GGSNAddress 652 0x28c O3
PDPID INPN_PDPID 655 0x28f O
Ellipsis INPN_Ellipsis 112 0x70 A

GPRS Event Codes

GPRS Event Codes are listed in the following table.

GPRS Event Name Code

INEVG_Attach 1
INEVG_AttachChangeOfPosition 2
INEVG_Detached 3
INEVG_PDPContextEstablishment 11
INEVG_PDPContextEstablishmentAck 12
INEVG_Disconnect 13
INEVG_PDPContextChangeOfPosition 14

B.10.52 RequestReportGPRSEvent
INOP_RequestReportGPRSEvent
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
GPRSEvent (SEQUENCE OF, size = 1 to 10) M
GPRSEventType INPN_GPRSEventType(n) 877 to 886 0x36d to 0x376 M2
MonitorMode INPN_MonitorMode(n) 208 to 217 0xd0 to 0xd9 M2
PDPID INPN_PDPID 665 0x299 O
Ellipsis INPN_Ellipsis 112 0x70 A

200
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.10.53 ResetTimerGPRS
INOP_ResetTimerGPRS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
TimerID INPN_TimerID 61 0x3d D
Default = tssf (0)
TimerValue INPN_TimerValue 62 0x3e M
Ellipsis INPN_Ellipsis 112 0x70 A

B.10.54 SendChargingInformationGPRS
INOP_SendChargingInformationGPRS
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x01 M
CAMEL-SCIGPRSBillingChargingCharacteristics M
AOCGPRS M2
AOCInitial M3
E1 INPN_Initial_CAI_E1 144 0x90 O4
E2 INPN_Initial_CAI_E2 145 0x91 O4
E3 INPN_Initial_CAI_E3 146 0x92 O4
E4 INPN_Initial_CAI_E4 147 0x93 O4
E5 INPN_Initial_CAI_E5 148 0x94 O4
E6 INPN_Initial_CAI_E6 149 0x95 O4
E7 INPN_Initial_CAI_E7 150 0x96 O4
AOCSubsequent O3
CAI-GSM0224 M4
E1 INPN_Subsequent_CAI_E1 151 0x97 O5
E2 INPN_Subsequent_CAI_E2 152 0x98 O5
E3 INPN_Subsequent_CAI_E3 153 0x99 O5
E4 INPN_Subsequent_CAI_E4 154 0x9a O5
E5 INPN_Subsequent_CAI_E5 155 0x9b O5
E6 INPN_Subsequent_CAI_E6 156 0x9c O5
E7 INPN_Subsequent_CAI_E7 157 0x9d O5
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O4
PDPID INPN_PDPID 665 0x299 O2
Ellipsis INPN_Ellipsis 112 0x70 A2

201
5 Non-Primitive Interface

B.11 CAMEL v4 for IMS Operation Definitions

Specification: CAMEL Application Part (CAP) 3GPP TS 29.278 7.0.0 (2005-12)

B.11.1 InitialDP
INOP_InitialDP
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M
ServiceKey INPN_ServiceKey 3 0x3 M
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O
cGEncountered INPN_cGEncountered 10 0xa O
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O
LocationNumber INPN_LocationNumber 13 0xd O
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x13 O
AdditionalCallingParty Number INPN_AdditionalCallingParty Number 21 0x15 O
BearerCapability
BearerCapability INPN_BearerCapability 23 0x17 O2
Ellipsis INPN_BearerCap_Ellipsis 119 0x77 02
EventTypeBCSM INPN_EventTypeBCSM(0) 192 0xc0 O
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O
RedirectionInformation INPN_RedirectionInformation 26 0x1a O
Cause INPN_Cause 41 0x29 O
ServiceInteractionIndicatorsTwo O
(see ServiceInteractionIndicatorsTwo (sub-table) on page 138)
Carrier INPN_Carrier 40 0x28 O
CUG-Index INPN_CUG_Index 644 0x284 O
CUG-Interlock INPN_CUG_Interlock 645 0x285 O
CUG-OutgoingAccess INPN_CUG_OutgoingAccess 646 0x286 O
IMSI INPN_IMSI 130 0x81 O
SubscriberState O
AssumedIdle INPN_AssumedIdle 134 0x86 C2
CamelBusy INPN_CamelBusy 135 0x87 C2
NetDetNotReachable INPN_NetDetNotReachable 136 0x88 C2

202
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_InitialDP
Parameter Mnemonic Value
(dec) (hex)
NotProvidedFromVLR INPN_NotProvidedFromVLR 137 0x89 C2
LocationInfo (see LocationInformation (sub-table) on page 139) O
Ext_BasicSrvCode O
BearerServiceCode INPN_Ext_BearerServiceCode 120 0x78 C2
TeleserviceCode INPN_Ext_TeleserviceCode 121 0x79 C2
CallReferenceNumber INPN_CallReferenceNumber 131 0x82 O
IMSSFAddress INPN_IMSSFAddress 4335 0x10EF O
CalledPartyBCDNumber INPN_CalledPartyBCDNumber 129 0x80 O
TimeAndTimezone INPN_TimeAndTimezone 132 0x84 O
GSM_Forwarding Pending INPN_GSM_ForwardingPending 133 0x85 O
IDPArgExtension O
GMSC Address INPN_GMSC_Address 653 0x28d O2
MediaTypeInfoList INPN_MediaTypeInfo 4359- 0x1107 O3
4363 to
0x110B
sipCallid INPN_SipCallId 4356 0x1104 O2
calledPartyURL INPN_CalledPartyURL 4357 0x1105 O2
callingPartyURL INPN_CallingPartyURL 4358 0x1106 O2
OriginalCalledPartyURL INPN_OriginalCalledPartyURL 4353 0x1101 O2
RedirectingPartyURL INPN_RedirectingPartyURL 4352 0x1100 O2
InitialDPArgExt_Ellipsis INPN_InitialDPArgExt_Ellipsis 117 0x75 O2
Ellipsis INPN_Ellipsis 112 0x70 A

B.11.2 ActivityTest
See CAP v.3. (Appendix B.9.23 ActivityTest on page 151).

B.11.3 ApplyCharging
See CAP v.3. (Appendix B.9.13 ApplyCharging on page 145).

B.11.4 ApplyChargingReport
See CAP v.3. (Appendix B.9.14 ApplyChargingReport on page 145).

B.11.5 CallGap
See CAP v.3. (Appendix B.9.15 CallGap on page 146).

B.11.6 CallInformationReport
See CAP v.3. (Appendix B.9.16 CallInformationReport on page 147).

203
5 Non-Primitive Interface

B.11.7 CallInformationRequest
See CAP v.3. (Appendix B.9.17 CallInformationRequest on page 148).

B.11.8 PlayAnnouncement
See CAP v.3. (Appendix B.9.19 PlayAnnouncement on page 149).

B.11.9 PromptAndCollectUserInformation
See CAP v.3. (Appendix B.9.20 PromptAndCollectUserInformation on page
150).

B.11.10 SpecializedResourceReport
See CAP v.3. (Appendix B.9.21 SpecializedResourceReport on page 150).

B.11.11 Cancel
See CAP v.3. (Appendix B.9.22 Cancel on page 151).

B.11.12 ContinueWithArg
See CAP v.3. (Appendix B.9.24 ContinueWithArg on page 151).

B.11.13 FurnishChargingInformation
See CAP v.3. (Appendix B.9.12 FurnishChargingInformation on page 144).

B.11.14 Continue
See CAP v.3. (Appendix B.9.10 Continue on page 144).

B.11.15 DisconnectForwardConnection
See CAP v.3. (Appendix B.9.4 DisconnectForwardConnection on page 140).

B.11.16 ConnectToResource
INOP_ConnectToResource
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M

B.11.17 Connect
INOP_Connect
Parameter Mnemonic Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M
DestinationRouting Address INPN_DestinationRouting Address(0) 27 0x1b M
AlertingPattern INPN_AlertingPattern 30 0x1e O
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O

204
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_Connect
Parameter Mnemonic Value
(dec) (hex)
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Carrier INPN_Carrier 40 0x28 O
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O
RedirectionInformation INPN_RedirectionInformation 26 0x1a O
GenericNumbers (SEQUENCE, size = 1 to 5) O
GenericNumber INPN_GenericNumber(n) 67 to 0x43 to O2
71 0x47
ServiceInteractionIndicatorsTwo O
(see ServiceInteractionIndicatorsTwo (sub-table) on page 138)
ChargeNumber INPN_ChargeNumber 642 0x282 O
CUG-Interlock INPN_CUG_Interlock 645 0x285 O
CUG-OutgoingAccess INPN_CUG_OutgoingAccess 646 0x286 O
Suppression of Announcement INPN_SuppressionOfAnnouncement 109 0x6d O
OCSIApplicable INPN_OCSIApplicable 110 0x6e O
NaOliInfo INPN_NAOliInfo 141 0x8d O
ConnectArgExtension O
DestinationRoutingAddressURL INPN_DestinationRoutingAddressURL 4354 0x1102 O2
OriginalCalledPartyURL INPN_OriginalCalledPartyURL 4353 0x1101 O2
RedirectingPartyURL INPN_RedirectingPartyURL 4352 0x1100 O2
Ellipsis INPN_Ellipsis 112 0x70 A

B.11.18 ReleaseCall
See CAP v.3. (Appendix B.9.7 ReleaseCall on page 141).

B.11.19 ResetTimer
See CAP v.3. (Appendix B.9.11ResetTimeron page 144).

B.11.20 RequestReportBCSMEvent
See CAP v.3. (Appendix B.9.8 RequestReportBCSMEvent on page 142).

B.11.21 EventReportBCSM
See CAP v.3. (Appendix B.9.9 EventReportBCSM on page 142).

205
5 Non-Primitive Interface

B.12 ETSI CS-2 Operation Definitions

B.12.1 InitialDP
INOP_InitialDP
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ServiceKey INPN_ServiceKey 3 0x3 M
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O
CallingPartyBuisness GroupID INPN_CallingPartyBusiness GroupID 7 0x7 O
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O
CGEncountered INPN_cGEncountered 10 0xa O
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O
IPAvailable INPN_IPAvailable 12 0xc O
LocationNumber INPN_LocationNumber 13 0xd O
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O
TerminalType INPN_TerminalType 17 0x11 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O
AdditionalCallingParty Number INPN_AdditionalCallingParty Number 21 0x15 O
ForwardCallIndicators INPN_ForwardCallIndicators 22 0x16 O
BearerCapability O
BearerCap INPN_BearerCapability 23 0x17 C2
Tmr INPN_Tmr 104 0x68 C2
EventTypeBCSM INPN_EventTypeBCSM(0) 192 0xc0 O
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O
RedirectionInformation INPN_RedirectionInformation 26 0x20 O
Cause INPN_Cause 41 0x29 O
ISDNAccessRelated Information INPN_ISDNAccessRelated Information 34 0x22 O
INServiceCompatibilityIndication (1..16) O
Agreements INPN_Agreements(0) 668 0x29c C2
NetworkSpecific INPN_NetworkSpecific(0) 684 0x2ac C2
GenericNumbers (1..5) O
GenericNumber INPN_GenericNumber(0) 67 0x43 O2
ServiceInteractionIndicatorsTwo O
ForwardServiceInteractionInd O2

206
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_InitialDP
Parameter Mnemonic Value
dec hex
ConferenceTreatmentIndicator INPN_Fw_ConferenceTreatmentInd 711 0x2c7 O3
CallDiversionTreatmentIndicator INPN_CallDiversionTreatmentInd 712 0x2c8 O3
CallOfferingTreatmentIndicator INPN_CallOfferingTreatmentInd 713 0x2c9 O3
CallingPartyRestricationIndicator INPN_CallingPartyRestricationInd 714 0x2ca O3
BackwardServiceInteractionInd O2
ConferenceTreatmentIndicator INPN_Bw_ConferenceTreatmentInd 710 0x2c6 O3
CallCompletionTreatmentIndicator INPN_CallCompletionTreatmentInd 716 0x2cc O3
BothwayThroughConnectionInd INPN_BothwayThroughConnectionIndicator 111 0x6f O2
SuspendTimer INPN_SuspendTimer 717 0x2cd O2
ConnectedNumberTreatment INPN_ConnectedNumberTreatment 718 0x2ce O2
SupressCallDiversionNotification INPN_SuppressCallDiverNot 719 0x2cf O2
SupressCallTransferNotification INPN_SuppressCallTransferNot 720 0x2d0 O2
AllowCdINNoPresentationInd INPN_AllowCdINNoPresentInd 721 0x2d1 O2
UserDialogueDurationInd INPN_UserDialogueDuratInd 722 0x2d2 O2
ForwardGVNS INPN_ForwardGVNS 724 0x2d4 O
CreatedCallSegmentAssociation INPN_CSAID 725 0x2d5 O
USIServiceIndicator O
Global INPN_Global(0) 828 0x33c C2
Local INPN_Local(0) 844 0x34c C2
USIInformation INPN_USIInformation 704 0x2c0 O
Carrier INPN_Carrier 40 0x28 O
IMSI INPN_IMSI 130 0x82 O
SubscriberState O
AssumedIdle INPN_AssumedIdle 134 0x86 M2
CamelBusy INPN_CamelBusy 135 0x87 M2
NetworkDetectionNotReachable INPN_NetDetNotReachable 136 0x88 M2
NotProvidedFromVLR INPN_NotProvidedFromVLR 137 0x89 M2
LocationInformation O
AgeOfLocation Information INPN_AgeOfLocation Information 124 0x7c O2
GeographicalInformation INPN_GeographicalInformation 125 0x7d O2
Vlr_Number INPN_Vlr_Number 126 0x7e O2
LI_LocationNumber INPN_LI_LocationNumber 127 0x7f O2
CellIdOrLAI O
CellIdFixedLength INPN_CellIdFixedLength 122 0x7a C2
LAIFixedLength INPN_LAIFixedLength 123 0x7b C2

207
5 Non-Primitive Interface

INOP_InitialDP
Parameter Mnemonic Value
dec hex
ExtensionContainer INPN_ExtensionContainer 128 0x80 O2
Ext-BasicServiceCode O
Ext-BearerServiceCode INPN_Ext_BearerServiceCode 120 0x78 C2
Ext-TeleserviceCode INPN_Ext_TeleserviceCode 121 0x79 C2
CallReferenceNumber INPN_CallReferenceNumber 131 0x83 O
MSCAddress INPN_ISDNAddressString 726 0x2d6 O
CalledPartyBCDNumber INPN_CalledPartyBCDNumber 129 0x81 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.2 AssistRequestInstructions
INOP_AssistRequestInstructions
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CorrelationID INPN_CorrelationID 31 0x1f M
IPAvailable INPN_IPAvailable 12 0xc O
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.3 EstablishTemporaryConnection
INOP_EstablishTemporaryConnection
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
AssistingSSPIPRouting Address INPN_AssistingSSPIPRouting 102 0x66 M
Address
CorrelationID INPN_CorrelationID 31 0x1f O
LegID C
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
CallSegmentID INPN_CallSegmentID 320 0x140 C2
ScfID INPN_ScfID 38 0x26 C
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O

208
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_EstablishTemporaryConnection
Parameter Mnemonic Value
dec hex
ServiceInteractionIndicatorsTwo O
ForwardServiceInteractionInd O2
ConferenceTreatment Indicator INPN_Fw_ConferenceTreatmentInd 711 0x2c7 O3
CallDiversionTreatment Indicator INPN_CallDiversionTreatmentInd 712 0x2c8 O3
CallOfferingTreatment Indicator INPN_CallOfferingTreatmentInd 713 0x2c9 O3
CallingPartyRestrication Indicator INPN_CallingPartyRestricationInd 714 0x2ca O3
BackwardServiceInteractionInd 02
ConferenceTreatment Indicator INPN_Bw_ConferenceTreatmentInd 710 0x2c6 O3
CallCompletion TreatmentIndicator INPN_CallCompletionTreatmentInd 716 0x2cc O3
BothwayThrough ConnectionInd INPN_BothwayThrough 111 0x6f O2
ConnectionIndicator
SuspendTimer INPN_SuspendTimer 717 0x2cd O2
ConnectedNumber Treatment INPN_ConnectedNumberTreatment 718 0x2ce O2
SupressCallDiversion Notification INPN_SuppressCallDiverNot 719 0x2cf O2
SupressCallTransfer Notification INPN_SuppressCallTransferNot 720 0x2d0 O2
AllowCdINNo PresentationInd INPN_AllowCdINNoPresentInd 721 0x2d1 O2
UserDialogueDurationInd INPN_UserDialogueDuratInd 722 0x2d2 O2
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.4 DisconnectForwardConnection
INOP_DisconnectForwardConnection
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

B.12.5 ConnectToResource
INOP_ConnectToResource
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
IPAddressAndLegID C
IPRoutingAddress INPN_IPRoutingAddress 85 0x55 M2
LegID M2
SendingSideID INPN_SendingSideID(0) 224 0xe0 C3
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C3

209
5 Non-Primitive Interface

INOP_ConnectToResource
Parameter Mnemonic Value
dec hex
IPAddressAndCallSegID C
IPRoutingAddress INPN_IPRoutingAddress 85 0x1f M2
CallSegmentID INPN_CallSegmentID 320 0x140 M2
IPRoutingAddress INPN_IPRoutingAddress 85 0x1f C
LegID C
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
Null n/a C
CallSegmentID INPN_CallSegmentID 320 0x140 C
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O
ServiceInteractionIndicatorsTwo O
ForwardServiceInteractionInd O2
ConferenceTreatment Indicator INPN_Fw_ConferenceTreatmentInd 711 0x2c7 O3
CallDiversionTreatment Indicator INPN_CallDiversionTreatment Ind 712 0x2c8 O3
CallOfferingTreatment Indicator INPN_CallOfferingTreatmentInd 713 0x2c9 O3
CallingPartyRestrication Indicator INPN_CallingPartyRestrication Ind 714 0x2ca O3
BackwardServiceInteractionInd O2
ConferenceTreatment Indicator INPN_Bw_ConferenceTreatmentInd 710 0x2c6 O3
CallCompletion TreatmentIndicator INPN_CallCompletionTreatmentInd 716 0x2cc O3
BothwayThrough ConnectionInd INPN_BothwayThrough 111 0x6f O2
ConnectionIndicator
SuspendTimer INPN_SuspendTimer 717 0x2cd O2
ConnectedNumber Treatment INPN_ConnectedNumber Treatment 718 0x2ce O2
SupressCallDiversion Notification INPN_SuppressCallDiverNot 719 0x2cf O2
SupressCallTransfer Notification INPN_SuppressCallTransferNot 720 0x2d0 O2
AllowCdINNo PresentationInd INPN_AllowCdINNoPresentInd 721 0x2d1 O2
UserDialogueDurationInd INPN_UserDialogueDuratInd 722 0x2d2 O2
Ellipsis INPN_Ellipsis 112 0x70 A

If no IPRouting address is supplied, a null resource address will be formatted.

210
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.12.6 Connect
INOP_Connect
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
DestinationRouting Address INPN_DestinationRouting Address(0) 27 0x1b O
AlertingPattern INPN_AlertingPattern 30 0x1e O
CorrelationID INPN_CorrelationID 31 0x1f O
CutAndPaste INPN_CutAndPaste 32 0x20 O
ISDNAccessRelated INPN_ISDNAccessRelated Information 34 0x22 O
Information
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O
RouteList
RouteList INPN_RouteList(0) 35 0x23
RouteList INPN_RouteList(1) 36 0x24
RouteList INPN_RouteList(2) 37 0x25
ScfID INPN_ScfID 38 0x26 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Carrier INPN_Carrier 40 0x28 O
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O
RedirectionInformation INPN_RedirectionInformation 26 0x1a O
DisplayInformation INPN_DisplayInformation 91 0x5b O
ForwardCallIndicators INPN_ForwardCallIndicators 22 0x16 O
GenericNumbers (1..5) O
GenericNumber INPN_GenericNumber(0) 67 0x43 O2
ServiceInteractionIndicatorsTwo O
ForwardServiceInteractionInd O2
ConferenceTreatment INPN_Fw_ConferenceTreatmentInd 711 0x2c7 O3
Indicator
CallDiversionTreatment INPN_CallDiversionTreatment Ind 712 0x2c8 O3
Indicator
CallOfferingTreatment INPN_CallOfferingTreatmentInd 713 0x2c9 O3
Indicator
CallingPartyRestrication INPN_CallingPartyRestrication Ind 714 0x2ca O3
Indicator
BackwardServiceInteractionInd O2

211
5 Non-Primitive Interface

INOP_Connect
Parameter Mnemonic Value
dec hex
ConferenceTreatment INPN_Bw_ConferenceTreatmentInd 710 0x2c6 O3
Indicator
CallCompletion INPN_CallCompletionTreatmentInd 716 0x2cc O3
TreatmentIndicator
BothwayThrough INPN_BothwayThrough ConnectionIndicator 111 0x6f O2
ConnectionInd
SuspendTimer INPN_SuspendTimer 717 0x2cd O2
ConnectedNumber Treatment INPN_ConnectedNumber Treatment 718 0x2ce O2
SupressCallDiversion INPN_SuppressCallDiverNot 719 0x2cf O2
Notification
SupressCallTransfer INPN_SuppressCallTransferNot 720 0x2d0 O2
Notification
AllowCdINNo PresentationInd INPN_AllowCdINNoPresentInd 721 0x2d1 O2
UserDialogueDurationInd INPN_UserDialogueDuratInd 722 0x2d2 O2
INServiceCompatibilityIndication (1..15) O
Agreements INPN_Agreements(0) 668 0x29c C2
NetworkSpecific INPN_NetworkSpecific(0) 684 0x2aC C2
ForwardGVNS INPN_ForwardGVNS 724 0x2d4 O
BackwardGVNS INPN_BackwardGVNS 723 0x2d5 O
CallSegmentID INPN_CallSegmentID 320 0x140 O
LegID O
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
LocationNumber INPN_LocationNumber 13 0xd O
BearerCapability O
BearerCap INPN_BearerCapability 23 0x17 C2
Tmr INPN_Tmr 104 0x68 C2
SuppressionOfAnnouncement INPN_SuppressionOfAnnouncement 109 0x6d O
OCSIApplicable INPN_OCSIApplicable 110 0x6e O
Ellipsis INPN_Ellipsis 112 0x70 A

212
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.12.7 ReleaseCall
INOP_ReleaseCall
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
InitialCallSegment INPN_InitialCallSegment 745 0x2e9 M
AssociatedCallSegment M
CallSegment INPN_CallSegment 744 0x2e8 M2
ReleaseCause INPN_Cause 41 0x29 O2
AllCallSegments M
ReleaseCause INPN_Cause 41 0x29 O2

B.12.8 RequestReportBCSMEvent
INOP_RequestReportBCSMEvent
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
BCSMEvents (SEQUENCE, n = 0 to 15) M
EventTypeBCSM INPN_EventTypeBCSM(n) 192 to 0xc0 to M2
207 0xcf
MonitorMode INPN_MonitorMode(n) 208 to 0xd0 to M2
223 0xdf
LegID O2
SendingSideID INPN_SendingSideID(n) 224 to 0xe0 to C3
239 0xef
ReceivingSideID INPN_ReceivingSideID(n) 240 to 0xf0 to C3
255 0xff
DPSpecificCriteria O2
NumberOfDigits INPN_NumberOfDigits(n) 160 to 0xa0 to C3
175 0xaf
ApplicationTimer INPN_ApplicationTimer(n) 176 to 0xb0 to C3
191 0xbf
MidCallControlInfo C3
MidCallCtrlSeq0 M4
MidCallInfoType0 M5
INServiceControlCode Low0 INPN_INServiceControlCode Low0(n) 1448 to 0x5a8 to M6
1463 0x5b7
INServiceControlCode High0 INPN_INServiceControlCode High0(n) 1464 to 0x5b8 to O6
1479 0x5c7
MidCallReportType0 INPN_MidCallReportType0(n) 1480 to 0x5c8 to D5
1495 0x5d7

213
5 Non-Primitive Interface

INOP_RequestReportBCSMEvent
Parameter Mnemonic Value
dec hex
MidCallCtrlSeq1 O4
MidCallInfoType1 O2
O5
INServiceControlCode Low1 INPN_INServiceControlCode Low1(n) 1528 to 0x5f8 to M6
1543 0x607
INServiceControlCode High1 INPN_INServiceControlCode High1(n) 1544 to 0x608 to O6
1559 0x617
MidCallReportType1 INPN_MidCallReportType1(n) 1560 to 0x618 to D5
1575 0x627
MidCallCtrlSeq2 O4
MidCallInfoType2 O5
INServiceControlCode Low2 INPN_INServiceControlCode Low2(n) 1608 to 0x648 to M6
1623 0x657
INServiceControlCode High2 INPN_INServiceControlCode High2(n) 1624 to 0x658 to O6
1639 0x667
MidCallReportType2 INPN_MidCallReportType2(n) 1640 to 0x668 to D5
1655 0x677
MidCallCtrlSeq3 O4
MidCallInfoType3 O5
INServiceControlCode Low3 INPN_INServiceControlCode Low3(n) 1688 to 0x698 to M6
1703 0x6a7
INServiceControlCode High3 INPN_INServiceControlCode High3(n) 1704 to 0x6a8 to O6
1719 0x6b7
MidCallReportType3 INPN_MidCallReportType3(n) 1720 to 0x6b8 to D5
1735 0x6c7
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

The BCSMEvent structure can be repeated up to sixteen times for each

operation. Replace ‘n’ with the position in the sequence of BCSMEvents
starting from 0. The LegID for each event may be specified as either a
SendingSideID or a ReceivingSideID. For some events, the LegID parameter
is mandatory; for example, events O-MidCall, O-Disconnect, T-MidCall and T-
Disconnect in ETSI 300 374-1 must have this parameter present. For other
events, the legID may take default values. Similarly, the DPSpecificCriteria
for each event may be specified as either NumberOfDigits or
ApplicationTimer.

214
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.12.9 EventReportBCSM
INOP_EventReportBCSM
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x01 M
EventTypeBCSM INPN_EventTypeBCSM(0) 192 0xc0 M
EventSpecificInformationBCSM O
CollectedInfo C2
CalledPartyNumber INPN_CalledPartyNumber 5 0x05 M3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
AnalyzedInformation C2
CalledPartyNumber INPN_CalledPartyNumber 5 0x05 M3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
RouteSelectFailure C2
FailureCause INPN_FailureCause 94 0x5e O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
OcalledPartyBusy C2
BusyCause INPN_BusyCause 95 0x5f O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
OnoAnswer C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Oanswer C2
BackwardGVNS INPN_BackwardGVNS 723 0x2d3 O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
OmidCall C2
ConnectTime INPN_ConnectTime 103 0X65 O3
oMidCallInfo C2
INServiceControlCode INPN_INServiceControlCode 701 0x2bd O4
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Odisconnect C2
ReleaseCause INPN_ReleaseCause 96 0x60 O3
ConnectTime INPN_ConnectTime 103 0x5f O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
TcalledPartyBusy C2
BusyCause INPN_BusyCause 95 0x5f O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
TnoAnswer C2

215
5 Non-Primitive Interface

INOP_EventReportBCSM
Parameter Mnemonic Value
dec hex
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Tanswer C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
TmidCall C2
ConnectTime INPN_ConnectTime 103 0x5f O3
tMidCallInfo O3
INServiceControlCode INPN_INServiceControlCode 701 0x2bd O4
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Tdisconnect C2
ReleaseCause INPN_ReleaseCause 96 0x60 O3
ConnectTime INPN_ConnectTime 95 0x5f O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
oTermSeizedSpecificInfo C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
oSuspended C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
origAttemptAuthorized C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
oReAnswer C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
facilitySelectedAndAvailable C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
callAccepted C2
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
oAbandon C2
abandonCause INPN_AbandonCause 95 0x5f O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3

216
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_EventReportBCSM
Parameter Mnemonic Value
dec hex
tAbandon C2
abandonCause INPN_AbandonCause 860 0x35c O3
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
terminationAttemptAuthorized C2
--No Info--
LegID O
SendingSideID INPN_SendingSideID(n) 224 to 239 0xe0 to 0xef C2
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0 to 0xff C2
MiscCallInfo O
MessageType INPN_MessageType 56 0x38 D2
Default = request(0)
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

The event specific information formatted or recovered is dependent on the

value of INPN_EventTypeBCSM(0). For example, if its value is collectedInfo
(2), then the format procedures will use the parameter
INPN_CalledPartyNumber.

B.12.10 RequestNotificationChargingEvent
INOP_RequestNotificationChargingEvent
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ChargingEvent (SEQUENCE, n = 0 to 15) M
EventTypeCharging INPN_EventTypeCharging(n) 272 to 287 0x110 to 0x11f M2
MonitorMode INPN_MonitorMode(n) 208 to 223 0xd0 to 0xdf M2
LegID O2
SendingSideID INPN_SendingSideID(n) 224 to 239 0xe0 to 0xef C3
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0 to 0xff C3
EventTypeTariff INPN_EventTypeTariff(n) 794 to 809 0x31a to 0x329 O2
Ellipsis INPN_Ellipsis 112 0x70 A

217
5 Non-Primitive Interface

B.12.11 EventNotificationCharging
INOP_EventNotificationCharging
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
EventTypeCharging INPN_EventTypeCharging(0) 272 0x110 M
EventSpecificInformationCharging INPN_EventSpecificInformationCharging 58 0x3a O
LegID O
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
MonitorMode INPN_MonitorMode(0) 208 0xd0 D
EventTypeTariff INPN_EventTypeTariff(0) 794 0x31a O
EventSpecificinformationTariff INPN_EventSpecificInformationTariff 707 0x2c3 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.12 CollectInformation
INOP_CollectInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.13 Continue
INOP_Continue
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

218
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.12.14 InitiateCallAttempt
INOP_InitiateCallAttempt
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
DestinationRouting Address INPN_DestinationRouting Address(0) 27 0x1b M
AlertingPattern INPN_AlertingPattern 30 0x1e O
ISDNAccessRelatedInformation INPN_ISDNAccessRelatedInformation 34 0x22 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O
LegID M
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
CallSegmentID INPN_CallSegmentID 320 0x140 M
INServiceCompatibilityResponse O
Agreements INPN_Agreements(0) 668 0x29c C2
NetworkSpecific INPN_NetworkSpecific(0) 684 0x2ac C2
ServiceInteractionIndicatorsTwo O
ForwardServiceInteractionInd O2
ConferenceTreatment Indicator INPN_Fw_ConferenceTreatmentInd 711 0x2c7 O3
CallDiversionTreatment Indicator INPN_CallDiversionTreatment Ind 712 0x2c8 O3
CallOfferingTreatment Indicator INPN_CallOfferingTreatmentInd 713 0x2c9 O3
CallingPartyRestrication Indicator INPN_CallingPartyRestrication Ind 714 0x2ca O3
BackwardServiceInteractionInd O2
ConferenceTreatmentIndicator INPN_Bw_ConferenceTreatmentInd 710 0x2c6 O3
CallCompletionTreatmentIndicator INPN_CallCompletionTreatmentInd 716 0x2cc O3
BothwayThrough ConnectionInd INPN_BothwayThrough 111 0x6f O2
ConnectionIndicator
SuspendTimer INPN_SuspendTimer 717 0x2cd O2
ConnectedNumberTreatment INPN_ConnectedNumberTreatment 718 0x2ce O2
SupressCallDiversionNotification INPN_SuppressCallDiverNot 719 0x2cf O2
SupressCallTransferNotification INPN_SuppressCallTransferNot 720 0x2d0 O2
AllowCdINNoPresentationInd INPN_AllowCdINNoPresentInd 721 0x2d1 O2
UserDialogueDurationInd INPN_UserDialogueDuratInd 722 0x2d2 O2
Carrier INPN_Carrier 40 0x28 O
LocationNumber INPN_LocationNumber 13 0xd O
BearerCapability O

219
5 Non-Primitive Interface

INOP_InitiateCallAttempt
Parameter Mnemonic Value
dec hex
BearerCap INPN_BearerCapability 23 0x17 C2
Tmr INPN_Tmr 104 0x68 C2
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.15 ResetTimer
INOP_ResetTimer
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
TimerID INPN_TimerID 61 0x3d D
TimerValue INPN_TimerValue 62 0x3e M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
CallSegmentID INPN_CallSegmentID 320 0x140 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.16 FurnishChargingInformation
INOP_FurnishChargingInformation
Parameter Mnemonic Value
dec hex
InvokeId INPN_InvokeId 1 0x1 M
FurnishCharging INPN_FCIBCCS1 715 0x2cb M
InformationBilling
ChargingCharacteristics
FCIBCCSequenceCS2 M
FCIBCC INPN_FCIBCC 708 0x2c4 O
Tariff O
Crgt INPN_Crgt 810 0x32a M2
Aocrg INPN_Aocrg 811 0x32b M2

220
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.12.17 ApplyCharging
INOP_ApplyCharging
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
AchBillingCharging INPN_AchBillingCharging 52 0x34 M
Characteristics Characteristics
SendCalculationToSCP INPN_SendCalculationToSCP 53 0x35 D
Indication Indication
Default = False
PartyToCharge O
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.18 ApplyChargingReport
INOP_ApplyChargingReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CallResult INPN_CallResult 55 0x37 M

B.12.19 CallGap
INOP_CallGap
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
GapCriteria M
CalledAddressAndService C2
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3
ServiceKey INPN_ServiceKey 3 0x3 M3
CallingAddressAndService C2
CallingAddressValue INPN_CallingAddressValue 99 0x63 M3
ServiceKey INPN_ServiceKey 3 0x3 M3
LocationNumber INPN_LocationNumber 13 0xd O3
GapOnService C2
ServiceKey INPN_ServiceKey 3 0x3 M3
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 C2
221
5 Non-Primitive Interface

INOP_CallGap
Parameter Mnemonic Value
dec hex
Null n/a
GapIndicators M
Gap Duration INPN_Gap_Duration 72 0x48 M2
GapInterval INPN_GapInterval 73 0x49 M2
ControlType INPN_ControlType 101 0x65 O
GapTreatment O
InformationToSend (see InformationToSend (Sub-table) on page 100) C2
ReleaseCause INPN_ReleaseCause 96 0x60 C2
Both C2
InformationToSend (see InformationToSend (Sub-table) on page 100) M3
ReleaseCause INPN_ReleaseCause 96 0x60 M3
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.20 ActivateServiceFiltering
INOP_ActivateServiceFiltering
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
FilteredCallTreatment M
SFBillingCharging INPN_SFBillingCharging 92 0x5c M2
Characteristics Characteristics
InformationToSend (see InformationToSend (Sub-table) on page 100) O2

MaximumNumberOf Counters INPN_MaximumNumberOf 93 0x5d O2

Counters
ReleaseCause INPN_ReleaseCause 96 0x60 O2
sFTariffMessage
ChargingTariff Information INPN_ChargingTariffInformation 932 0x3a4 03
SFTarrifMessage Ellipsis INPN_SFTarrifMessage_Ellipsis 933 0x3a5 O3
FilteringCharacteristics M
Interval INPN_Interval 90 0x5a C2
NumberOfCalls INPN_NumberOfCalls 97 0x61 C2
FilteringTimeout M
Filtering Duration INPN_Filtering_Duration 98 0x62 C2
StopTime INPN_StopTime 100 0x64 C2

222
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_ActivateServiceFiltering
Parameter Mnemonic Value
dec hex
FilteringCriteria M
ServiceKey INPN_ServiceKey 3 0x3 C2
AddressAndService C2
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3
ServiceKey INPN_ServiceKey 3 0x3 M3
CallingAddressValue INPN_CallingAddressValue 99 0x63 O3
LocationNumber INPN_LocationNumber 13 0xd O3
StartTime O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.21 ServiceFilteringResponse
INOP_ServiceFilteringResponse
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CountersValue (SEQUENCE, size = 1 to 100) M
CounterID INPN_CounterID 328 to 427 0x148 to 0x1ab M2
CounterValue INPN_CounterValue 428 to 527 0x1ac to 0x20f M2
FilteringCriteria M
ServiceKey INPN_ServiceKey 3 0x3 C2
AddressAndService C2
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3
ServiceKey INPN_ServiceKey 3 0x3 M3
CallingAddressValue INPN_CallingAddressValue 99 0x63 O3
LocationNumber INPN_LocationNumber 13 0xd O3
Ellipsis INPN_Ellipsis 112 0x70 A

223
5 Non-Primitive Interface

B.12.22 CallInformationReport
INOP_CallInformationReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
RequestedInformationReport (SEQUENCE, size = 1 to 5) M
RequestedInformationType INPN_RequestedInformationType 288 0x120 M2
to to
292 0x124
RequestedInformationValue M2
CallAttemptEllapsed TimeValue INPN_CallAttemptEllapsedTimeValue(n) 293 0x125 C3
to to
297 0x129
CallStopTimeValue INPN_CallStopTimeValue(n) 298 0x12a C3
to to
302 0x12e
CallConnectedElapsedTimeValue INPN_CallConnectedElapsedTimeValue(n) 303 0x12f C3
to to
307 0x133
CalledAddressValue INPN_CalledAddressValue(n) 308 0x134 C3
to to
312 0x138
ReleaseCauseValue INPN_ReleaseCauseValue(in 313 0x139 C3
to to
317 0x13d
Extensions (see Appendix B.15 Operation Extensions on page 282) O
LegID O2
SendingSideID INPN_SendingSideID(0) 224 0xe0 C3
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C3
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.23 CallInformationRequest
INOP_CallInformationReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
RequestedInformationReport (SEQUENCE, size = 1 to 5) M
RequestedInformationType INPN_RequestedInformationType 288 to 0x120 to M2
292 0x124
Extensions (see Appendix B.15 Operation Extensions on page 282) O
LegID O2

224
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_CallInformationReport
Parameter Mnemonic Value
dec hex
SendingSideID INPN_SendingSideID(0) 224 0xe0 C3
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C3
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.24 SendChargingInformation
INOP_SendChargingInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
SCIBillingCharging INPN_SCIBillingCharging 87 0x57 M
Characteristics Characteristics
LegID M
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
TariffMessage INPN_TariffMessage 956 0x3bc O
Ellipsis INPN_Ellipsis 112 0x70 A

Tariff message should be encoded as ChargingMessageType, as defined in

ETSI ES 201 296.

B.12.25 PlayAnnouncement
INOP_PlayAnnouncement
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
InformationToSend (see InformationToSend (Sub-table) on page 100) O
M2
DisconnectFromIP INPN_DisconnectFromIP Forbidden 59 0x3b D
Forbidden
Default = True
RequestAnnouncement INPN_RequestAnnouncement Complete 60 0x3c D
Complete
Default = True
Extensions (see Appendix B.15 Operation Extensions on page 282) O
CallSegmentID INPN_CallSegmentID 320 0x140 O
LegID O

225
5 Non-Primitive Interface

INOP_PlayAnnouncement
Parameter Mnemonic Value
dec hex
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.26 PromptAndCollectUserInformation
INOP_PromptAndCollectUserInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CollectedInfo M
CollectedDigits M2
MinimumNumberOfDigits INPN_MinimumNumberOfDigits 74 0x4a D3
Default = 1
MaximumNumberOf Digits INPN_MaximumNumberOf Digits 75 0x4b M3
EndOfReplyDigit INPN_EndOfReplyDigit 76 0x4c O3
CancelDigit INPN_CancelDigit 77 0x4d O3
StartDigit INPN_StartDigit 78 0x4e O3
FirstDigitTimeOut INPN_FirstDigitTimeOut 79 0x4f O3
InterDigitTimeOut INPN_InterDigitTimeOut 80 0x50 O3
Errortreatment INPN_Errortreatment 81 0x41 D3
Default = StfErrorAndInfo
InterDigitTimeOut INPN_InterDigitTimeOut 82 0x42 D3
Default = True
InterruptableAndInd INPN_InterruptableAnnInd 83 0x43 D3
Default = False
VoiceBack INPN_VoiceBack 84 0x44 D3
Default = False
DisconnectFromIP Forbidden INPN_DisconnectFromIP Forbidden 59 0x3b D
Default = True
InformationToSend (see InformationToSend (Sub-table) on page 100) O
M2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
CallSegmentID INPN_CallSegmentID 320 0x140 O
Ellipsis INPN_Ellipsis 112 0x70 A

226
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.12.27 SpecializedResourceReport
INOP_ SpecializedResourceReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
LinkedID INPN_LinkedID 2 0x2 O

B.12.28 Cancel
INOP_Cancel
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Cancel_InvokeID INPN_Cancel_InvokeID 86 0x56 O
CallSegmentToCancel O
Cancel_InvokeID INPN_Cancel_InvokeID 86 0x56 M2
CallSegmentID INPN_CallSegmentID 320 0x140 M2

If the parameter IPN_Cancel_InvokeID is not set, then the operation will be

sent with the null parameter ‘All Requests’ indicating all operations on that
dialogue should be cancelled.

B.12.29 ActivityTest
INOP_ ActivityTest
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M

B.12.30 DFC_With_Argument
INOP_DFC_with_Argument
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
LegOrCSID M
LegID C2
SendingSideID INPN_SendingSideID(0) 224 0xe0 C3
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C3
CallSegmentID INPN_CallSegmentID 320 0x140 C2

227
5 Non-Primitive Interface

INOP_DFC_with_Argument
Parameter Mnemonic Value
dec hex
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.31 ContinueWithArgument
INOP_ ContinueWithArgument
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
LegOrCSID M
LegID C2
SendingSideID INPN_SendingSideID(0) 224 0xe0 C3
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C3
CallSegmentID INPN_CallSegmentID_Array(0) 1004 0x3ec C2
AlertingPattern INPN_AlertingPattern 30 0x1e O
GenericName INPN_GenericName 934 0x3ae O
INServiceCompatibilityResponse O
Agreements INPN_Agreements 668 0x29c C2
NetworkSpecific INPN_NetworkSpecific 684 0x2ac C2
ForwardGVNS INPN_ForwardGVNS 724 0x2d4 O
BackwardGVNS INPN_BackwardGVNS 723 0x2d3 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ServiceInteractionIndicatorsTwo O
ForwardServiceInteractionInd O2
ServiceInt_Ind_Two INPN_ServiceInt_Ind_Two 942 0x3ae O
ConferenceTreatmentIndicator INPN_Fw_ConferenceTreatmentInd 711 0x2c7 O3
CallDiversionTreatmentIndicator INPN_CallDiversionTreatmentInd 712 0x2c8 O3
CallOfferingTreatmentIndicator INPN_CallOfferingTreatmentInd 713 0x2c9 O3
CallingPartyRestricationIndicator INPN_CallingPartyRestricationInd 714 0x2ca O3
BackwardServiceInteractionInd O2
ConferenceTreatmentIndicator INPN_Bw_ConferenceTreatmentInd 710 0x2c6 O3
CallCompletionTreatmentIndicator INPN_CallCompletionTreatmentInd 716 0x2cc O3
BothwayThroughConnectionInd INPN_BothwayThroughConnectionIndicator 111 0x6f O2
SuspendTimer INPN_SuspendTimer 717 0x2cd O2
ConnectedNumberTreatment INPN_ConnectedNumberTreatment 718 0x2ce O2
SupressCallDiversionNotification INPN_SuppressCallDiverNot 719 0x2cf O2

228
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_ ContinueWithArgument
Parameter Mnemonic Value
dec hex
SupressCallTransferNotification INPN_SuppressCallTransferNot 720 0x2d0 O2
AllowCdINNoPresentationInd INPN_AllowCdINNoPresentInd 721 0x2d1 O2
UserDialogueDurationInd INPN_UserDialogueDuratInd 722 0x2d2 O2
ServiceInteractionIndicatorsTwo INPN_ServIntActInd2_Ellipsis 1404 0x57c O2
_Ellipsis
LocationNumber INPN_LocationNumber 13 0xd O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.32 CreateCallSegmentAssociation
INOP_CreateCallSegmentAssociation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.33 DisconnectLeg
INOP_DisconnectLeg
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Leg to be released M
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
ReleaseCause INPN_ReleaseCause 96 0x60 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

229
5 Non-Primitive Interface

B.12.34 MergeCallSegments
INOP_MergeCallSegments
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
SourceCallSegment INPN_SourceCallSegment(0) 1020 0x3fc M
TargetCallSegment INPN_TargetCallSegment 936 0x3a8 D
Default = 1 (InitialCallSegment)
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.35 MoveCallSegment
INOP_MoveCallSegments
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
TargetCallSegment INPN_TargetCallSegment 937 0x3a7 M
Association Association
CallSegments (SEQUENCE, size = 1 to 16) M
SourceCallSegment INPN_SourceCallSegment(n) 1020 to 0x3fc to D2
Default = 1 1035 0x40b
(InitialCallSegment)
NewCallSegment INPN_NewCallSegment(n) 1036 to 0x40c to M2
1051 0x41b
Legs M
SourceLeg INPN_SourceLeg(n) 972 to 0x3cc to M2
987 0x3db
NewLeg INPN_NewLeg(n) 988 to 0x3dc to M2
1003 0x3eb
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

230
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.12.36 MoveLeg
INOP_MoveLeg
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Leg ID to be move M
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
TargetCallSegment INPN_TargetCallSegment 936 0x3a8 D
Default = 1 (InitialCallSegment)
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.37 SplitLeg
INOP_SpliteLeg
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Leg ID to be split M
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
NewCallSegment INPN_NewCallSegment(0) 1036 0x40c M2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.38 EntityReleased
INOP_EntityReleased
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CS Failure C
CallSegmentID INPN_CallSegmentID 320 0x140 02
Reason INPN_EntityReleased_Reason 943 0x3af O2
Cause INPN_EntityReleased_Cause 944 0x3b0 02
Ellipsis INPN_CSFailure_Ellipsis 945 0x3b1 A2
BCSM Failure C
Leg ID to be split M2
SendingSideID INPN_SendingSideID(0) 224 0xe0 C3

231
5 Non-Primitive Interface

INOP_EntityReleased
Parameter Mnemonic Value
dec hex
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C3
Reason INPN_EntityReleased_Reason 943 0x3af O2
Cause INPN_EntityReleased_Cause 944 0x3b0 O2
Ellipsis INPN_BCSMFailure_Ellipsis 946 0x3b2 A2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.39 ManageTriggerData
INOP_ManageTriggerData
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ActionIndicator INPN_ActionIndicator 947 0x3b3 M
TriggerDataIdentifier M
TriggerID INPN_EventTypeBCSM(0) 192 0xc0 M2
ProfileIdentifier M2
Access INPN_CalledPartyNumber 5 0x5 C3
FacilityGroup C3
TrunkGroupID INPN_TrunkGroupID 951 0x3b7 C4
PrivateFacilityID INPN_PrivateFacilityID 952 0x3b8 C4
HuntGroup INPN_HuntGroup 953 0x3b9 C4
RouteIndex INPN_RouteIndex 954 0x3ba C4
Ellipsis INPN_TriggerDataId_Ellipsis 950 0x3b6 A2
RegistratorIdentifier INPN_RegistratorIdentifier 949 0x3b5 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

232
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.12.40 RequestReportUTSI
INOP_RequestReportUTSI
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
RequestedUTSIList (SEQUENCE, size 1..16) M
USIServiceIndicator M2
Global INPN_Global(n) 828 to 843 0x33c to 0x34b C3
Local INPN_Local(n) 844 to 859 0x34c to 35b C3
USIMonitorMode INPN_USIMonitorMode(n) 812 to 827 0x32c to 0x33b M2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
LegID O2
SendingSideID INPN_SendingSideID(0) 224 0xe0 D3
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C3
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.41 SendSTUI
INOP_SendSTUI
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
USIServiceIndicator M
Global INPN_Global 828 0x33c C2
Local INPN_Local 844 0x34c C2
LegID O
SendingSideID INPN_SendingSideID(0) 224 0xe0 D2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
USIInformation INPN_USIInformation 704 0x2c0 M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

233
5 Non-Primitive Interface

B.12.42 ReportUTSI
INOP_ReportUTSI
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
USIServiceIndicator M
Global INPN_Global(0) 828 0x33c C2
Local INPN_Local(0) 844 0x34c C2
LegID O
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 D2
USIInformation INPN_USIInformation 704 0x2c0 M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.43 PromptAndReceiveMessage
INOP_PromptAndReceiveMessage
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
DisconnectFromIP Forbidden INPN_DisconnectFromIP Forbidden 59 0x3b D
Default = True
InformationToSend (see InformationToSend (Sub-table) on page 100) O
M2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
SubscriberID INPN_SubscriberID 321 0x141 O
MailBoxID INPN_MailBoxID 322 0x142 O
InformationToRecord M
Record_MessageID INPN_Record_MessageID 630 O2
MessageDeletionTime Out INPN_MessageDeletionTime Out 625 0x271 O2
TimeToRecord INPN_TimeToRecord 626 0x272 O2
Control Digits O2
EndOfRecordingDigit INPN_EndOfRecordingDigit 553 0x229 O3
CancelDigit INPN_CancelDigit 77 0x4d O3
ReplayDigit INPN_ReplayDigit 554 0x22a O3
RestartRecordingDigit INPN_RestartRecordingDigit 555 0x22b O3
RestartAllowed INPN_RestartAllowed 556 0x22c D3
Default = False

234
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_PromptAndReceiveMessage
Parameter Mnemonic Value
dec hex
ReplayAllowed INPN_ReplayAllowed 557 0x22d D3
Default = False
ControlDigits_Ellipsis INPN_ControlDigits_Ellipsis 558 0x22e A3
InfoToRecord_Ellipsis INPN_InfoToRecord_Ellipsis 559 0x22f A2
Media INPN_Media 323 0x143 D
Default = VoiceMail (0)
CallSegmentID INPN_CallSegmentID 320 0x140 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.44 ScriptInformation
INOP_ScriptInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ScriptId Local Identifier INPN_ScriptId_Local 324 0x144 C
ScriptId Global Identifier INPN_ScriptId_Global 325 0x145 C
ScriptSpecificInfo INPN_ScriptSpecificInfo 326 0x146 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
CallSegmentID INPN_CallSegmentID 320 0x140 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.45 ScriptEvent
INOP_ScriptEvent
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ScriptId Local Identifier INPN_ScriptId_Local 324 0x144 C
ScriptId Global Identifier INPN_ScriptId_Global 325 0x145 C
ScriptResult INPN_ScriptResult 327 0x146 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
CallSegmentID INPN_CallSegmentID 320 0x140 O
LastEventIndicator INPN_LastEventIndicator 627 0x273 O
Ellipsis INPN_Ellipsis 112 0x70 A

235
5 Non-Primitive Interface

B.12.46 ScriptRun
INOP_ScriptRun
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ScriptId Local Identifier INPN_ScriptId_Local 324 0x144 C
ScriptId Global Identifier INPN_ScriptId_Global 325 0x145 C
ScriptSpecificInfo INPN_ScriptSpecificInfo 326 0x146 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
DisconnectFromIP INPN_DisconnectFromIP Forbidden 59 0x3b O
Forbidden
CallSegmentID INPN_CallSegmentID 320 0x140 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.47 ScriptClose
INOP_ScriptClose
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ScriptId Local Identifier INPN_ScriptId_Local 324 0x144 C
ScriptId Global Identifier INPN_ScriptId_Global 325 0x145 C
ScriptSpecificInfo INPN_ScriptSpecificInfo 326 0x146 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
CallSegmentID INPN_CallSegmentID 320 0x140 O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.48 EstablishChargingRecord
INOP_EstablishChargingRecord
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
UserCredit O
Currancy C2
CurrencyID INPN_CurrencyID 1244 0x4dc M3
Amount INPN_Amount 1245 0x4dd M3
CurrencyValue Ellipsis INPN_CurrencyValue_Ellipsis 1246 0x4de A3
CreditUnit INPN_CreditUnit 1368 0x C2
ChargingParameters O

236
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_EstablishChargingRecord
Parameter Mnemonic Value
dec hex
UnitsPerInterval INPN_UnitsPerInterval 1247 0x4df M2
TimePerInterval INPN_TimePerInterval 1248 0x4e0 M2
ScalingFactor INPN_ScalingFactor 1249 0x4e1 M2
InitialUnitIncrement INPN_InitialUnitIncrement 1250 0x4e2 O2
UnitsPerDataInterval INPN_UnitsPerDataInterval 1251 0x4e3 O2
SegmentsPerData Interval INPN_SegmentsPerDataInterval 1252 0x4e4 O2
InitialTimeInterval INPN_InitialTimeInterval 1253 0x4e4 O2
ChargingParameters Ellipsis INPN_ChargingParameters_ Ellipsis 1254 0x4e6 O2
SecurityParameters O
CertificationPath INPN_CertificationPath 1294 0x50e O2
DistinguishedName INPN_DistinguishedName 1295 0x50f O2
UTCTime INPN_UTCTime 1296 0x510 O2
Random INPN_Random 1297 0x511 O2
Target INPN_Target 1298 0x512 O2
Response INPN_Response 1299 0x513 O2
OperationCode INPN_OperationCode 1300 0x514 O2
AttributeCertificationPath INPN_AttributeCertificationPath 1301 0x515 O2
ErrorProtection INPN_ErrorProtection 1302 0x516 O2
ReportExpected INPN_ReportExpected 1278 0x4fe O
Default = True
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.49 HandlingInformationRequest
INOP_HandlingInformationRequest
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
RequestedType INPN_RequestedType 1279 0x4ff O
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O
LocationNumber INPN_LocationNumber 13 0xd O
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O
DialledDigits INPN_DialledDigits 4 0x4 O
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O
RedirectionInformation INPN_RedirectionInformation 26 0x1a O

237
5 Non-Primitive Interface

INOP_HandlingInformationRequest
Parameter Mnemonic Value
dec hex
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O
NumberOfCallAttempts INPN_NumberOfCallAttempts 1280 0x500 O
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x19 O
BearerCapability INPN_BearerCapability 23 0x17 O
InvokedSupplementary Service INPN_InvokedSupplementary Service 1281 0x501 O
ActiveSupplementary Services INPN_ActiveSupplementary Services 1282 0x502 O
CauseOfLastCallFailure INPN_CauseOfLastCallFailure 1283 0x503 O
UserInteractionModes INPN_UserInteractionModes 1284 0x504 O
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O
CallingPartyBusinessGroupID INPN_CallingPartyBusiness GroupID 7 0x7 O
SecurityParameters O
CertificationPath INPN_CertificationPath 1294 0x50e O2
DistinguishedName INPN_DistinguishedName 1295 0x50f O2
UTCTime INPN_UTCTime 1296 0x510 O2
Random INPN_Random 1297 0x511 O2
Target INPN_Target 1298 0x512 O2
Response INPN_Response 1299 0x513 O2
OperationCode INPN_OperationCode 1300 0x514 O2
AttributeCertificationPath INPN_AttributeCertificationPath 1301 0x515 O2
ErrorProtection INPN_ErrorProtection 1302 0x516 O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.50 HandlingInformationResult
INOP_HandlingInformationResult
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
RoutingAddress O
RoutingProhibited INPN_RoutingProhibited 1260 0x4ec C2
DestinationRouting Address INPN_DestinationRouting Address(0) 27 0x1b C2
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x19 O
SupplimentaryServices INPN_SupplimentaryServices 1277 0x4fd O
PreferredLanguagge INPN_PreferredLanguage 1285 0x505 O
Carrier INPN_Carrier 40 0x28 O

238
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_HandlingInformationResult
Parameter Mnemonic Value
dec hex
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O
RedirectionInformation INPN_RedirectionInformation 26 0x1a O
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O
SecurityParameters O
CertificationPath INPN_CertificationPath 1294 0x50e O2
DistinguishedName INPN_DistinguishedName 1295 0x50f O2
UTCTime INPN_UTCTime 1296 0x510 O2
Random INPN_Random 1297 0x511 O2
Target INPN_Target 1298 0x512 O2
Response INPN_Response 1299 0x513 O2
OperationCode INPN_OperationCode 1300 0x514 O2
AttributeCertificationPath INPN_AttributeCertificationPath 1301 0x515 O2
ErrorProtection INPN_ErrorProtection 1302 0x516 O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.51 NetworkCapability
INOP_NetworkCapability
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
BearerCapabilities (Bitstring) INPN_Bits_BearerCapabilities 1286 0x506 O
HighLayerCompatiblities INPN_Bits_HighLayer 1287 0x507 O
(Bitstring) Compatiblities
SupplimentaryServices INPN_SupplimentaryServices 1277 0x4fd O
SecurityParameters O
CertificationPath INPN_CertificationPath 1294 0x50e O2
DistinguishedName INPN_DistinguishedName 1295 0x50f O2
UTCTime INPN_UTCTime 1296 0x510 O2
Random INPN_Random 1297 0x511 O2
Target INPN_Target 1298 0x512 O2
Response INPN_Response 1299 0x513 O2
OperationCode INPN_OperationCode 1300 0x514 O2

239
5 Non-Primitive Interface

INOP_NetworkCapability
Parameter Mnemonic Value
dec hex
AttributeCertificationPath INPN_AttributeCertificationPath 1301 0x515 O2
ErrorProtection INPN_ErrorProtection 1302 0x516 O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.52 NotificationProvided
INOP_NotificationProvided
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Notification INPN_Notification M
Notification Information O
UserAbandon C2
EventSpecInfo Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
CallFailure C2
FailureCause INPN_FailureCause 94 0x5e
EventSpecInfo Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
NoReply C2
EventSpecInfo Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
CallRelease C2
ReleaseCause INPN_ReleaseCause 96 0x60 O3
TimeStamp INPN_TimeStamp 1292 0x50c O3
EventSpecInfo Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
SSInvocation C2
InvokableService INPN_InvokableService 1293 0x50d O3
EventSpecInfo Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
CreditLimitReached C2
TimeStamp INPN_TimeStamp 1292 0x50c O3
EventSpecInfo Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
CallDuration C2
TimeStamp INPN_TimeStamp 1292 0x50c O3
EventSpecInfo Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
CalledNumber C2
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O3
EventSpecInfo Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3

240
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_NotificationProvided
Parameter Mnemonic Value
dec hex
AnsweredCall C2
TimeStamp INPN_TimeStamp 1292 0x50c O3
EventSpecInfo Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
SecurityParameters O
CertificationPath INPN_CertificationPath 1294 0x50e O2
DistinguishedName INPN_DistinguishedName 1295 0x50f O2
UTCTime INPN_UTCTime 1296 0x510 O2
Random INPN_Random 1297 0x511 O2
Target INPN_Target 1298 0x512 O2
Response INPN_Response 1299 0x513 O2
OperationCode INPN_OperationCode 1300 0x514 O2
AttributeCertificationPath INPN_AttributeCertificationPath 1301 0x515 O2
ErrorProtection INPN_ErrorProtection 1302 0x516 O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.53 ConfirmedNotificationProvided
As per Section B.12.52 NotificationProvided on page 240.

B.12.54 ProvideUserInformation
INOP_ProvideUserInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Constraints M
MaximumNumberOf Digits INPN_MaximumNumberOfDigits 75 0x4b
MinimumNumberOf Digits INPN_MinimumNumberOfDigits 74 0x4a
TypeOfRequestedInfo INPN_TypeOfRequestedInfo 1097 0x449 D2
Default = numericString 0
NumberOfAllowedRetries INPN_NumberOfAllowedRetries 1098 0x44a D2
Default = 0
Info to send (See InformationToSend (Sub-table) on page 100) O
M2
Error Info (See Error InformationToSend (Sub-table) on page 242) O
M2

241
5 Non-Primitive Interface

INOP_ProvideUserInformation
Parameter Mnemonic Value
dec hex
TypeOfRequestedInfo INPN_TypeOfRequestedInfo 1097 0x449 D
Default = numericString 0
NumberOfAllowedRetries INPN_NumberOfAllowedRetries 1098 0x44a D
Default = 0
Actions INPN_Actions 1290 0x50a O
PreferredLanguagge INPN_PreferredLanguage 1285 0x505 O
SecurityParameters O
CertificationPath INPN_CertificationPath 1294 0x50e O2
DistinguishedName INPN_DistinguishedName 1295 0x50f O2
UTCTime INPN_UTCTime 1296 0x510 O2
Random INPN_Random 1297 0x511 O2
Target INPN_Target 1298 0x512 O2
Response INPN_Response 1299 0x513 O2
OperationCode INPN_OperationCode 1300 0x514 O2
AttributeCertificationPath INPN_AttributeCertificationPath 1301 0x515 O2
ErrorProtection INPN_ErrorProtection 1302 0x516 O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

Error InformationToSend (Sub-table)

Error InformationToSend
Parameter Mnemonic Value
dec hex
InbandInfo C
MessageID O2
ElementaryMessageID INPN_Error_Elementary 1258 0x4ea C3
MessageID
Text C3
MessageContent INPN_ Error_MessageContent 1255 0x4e7 M4
Attributes INPN_ Error_Attributes 1256 0x4e8 O4
ElementaryMessageIDs INPN_ Error_Elementary 1052 to 0x41c to C3
MessageIDs(n) 1067 0x42b
VariableMessage C3
ElementaryMessageID INPN_ Error_Variable_ MessageID 1257 0x4e9 C4
VariableParts M4
Integer INPN_ Error_Integer(n) 1068 to 0x42c to C5
1072 0x430

242
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Error InformationToSend
Parameter Mnemonic Value
dec hex
Number INPN_ Error_Number(n) 1073 to 0x431 to C5
1077 0x435
Time INPN_ Error_Time(n) 1078 to 0x436 to C5
1082 0x43a
Date INPN_ Error_Date(n) 1083 to 0x43b to C5
1087 0x43f
Price INPN_ Error_Price(n) 1088 to 0x440 to C5
1092 0x444
NumberOfRepetitions INPN_ Error_NumberOf 1093 0x445 O2
Repetitions
Duration INPN_ Error_Duration 1094 0x446 O2
Interval INPN_ Error_Interval 1095 0x447 O2
Tone C
ToneID INPN_ Error_ToneID 1259 0x4eb M2
Duration INPN_ Error_Duration 1094 0x446 O2
DisplayInformation INPN_ Error_DisplayInformation 1096 0x447 C

B.12.55 ConfirmedReportChargingInformation
As per Section B.12.56 ReportChargingInformation below.

B.12.56 ReportChargingInformation
INOP_ReportChargingInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CallRecord O
Duration INPN_Duration 89 0x59 M2
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 M2
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 M2
CallRecord_Ellipsis INPN_CallRecord_Ellipsis 1099 0x44b A2
UserCredit O
CurrencyValue C2
CurrencyID INPN_CurrencyID 1244 0x4dc M3
Amount INPN_Amount 1245 0x4dd M3
CurrencyValue Ellipsis INPN_CurrencyValue_Ellipsis 1246 0x4de A3
CreditUnit INPN_CreditUnit 1368 0x558 C2
UniqueCallID INPN_UniqueCallID 1289 0x509 O

243
5 Non-Primitive Interface

INOP_ReportChargingInformation
Parameter Mnemonic Value
dec hex
AccountNumber INPN_AccountNumber 1291 0x50b O
SecurityParameters O
CertificationPath INPN_CertificationPath 1294 0x50e O2
DistinguishedName INPN_DistinguishedName 1295 0x50f O2
UTCTime INPN_UTCTime 1296 0x510 O2
Random INPN_Random 1297 0x511 O2
Target INPN_Target 1298 0x512 O2
Response INPN_Response 1299 0x513 O2
OperationCode INPN_OperationCode 1300 0x514 O2
AttributeCertificationPath INPN_AttributeCertificationPath 1301 0x515 O2
ErrorProtection INPN_ErrorProtection 1302 0x516 O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.57 RequestNotification
INOP_RequestNotification
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
RequestedNotifications (Request up to 9 notifications, n = 0 up to 8) O
UserAbandon(n) INPN_UserAbandon(n) 1100 to 1115 0x44c to C2
0x45b
CallFailure(n) INPN_CallFailure(n) 1116 to 1131 0x45c to C2
0x46b
NoReply(n) INPN_NoReply(n) 1132 to 1147 0x46c to C2
0x47b
CallRelease(n) INPN_CallRelease(n) 1148 to 1163 0x47c to C2
0x48b
SS_Invocation(n) INPN_SS_Invocation(n) 1164 to 1179 0x48c to C2
0x49b
CreditLimitReached(n) INPN_CreditLimitReached(n) 1180 to 1195 0x49c to C2
0x4ab
CallDuration(n) INPN_CallDuration(n) 1196 to 1211 0x4ac to C2
0x4bb
CalledNumber(n) INPN_CalledNumber(n) 1212 to 1227 0x4bc to C2
0x4cb
AnsweredCall(n) INPN_AnsweredCall(n) 1228 to 1243 0x4cc to C2
0x4db
SecurityParameters O
244
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_RequestNotification
Parameter Mnemonic Value
dec hex
CertificationPath INPN_CertificationPath 1294 0x50e O2
DistinguishedName INPN_DistinguishedName 1295 0x50f O2
UTCTime INPN_UTCTime 1296 0x510 O2
Random INPN_Random 1297 0x511 O2
Target INPN_Target 1298 0x512 O2
Response INPN_Response 1299 0x513 O2
OperationCode INPN_OperationCode 1300 0x514 O2
AttributeCertificationPath INPN_AttributeCertificationPath 1301 0x515 O2
ErrorProtection INPN_ErrorProtection 1302 0x516 O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.58 InitiateAssociation
INOP_InitiateAssociation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
USIServiceIndicator O
Global INPN_Global(0) 828 0x33c C2
Local INPN_Local(0) 844 0x34c C2
USIInformation INPN_USIInformation 704 0x2c0 O
Ellipsis INPN_Ellipsis 112 0x70 A

245
5 Non-Primitive Interface

B.12.59 ReleaseAssociation
INOP_ReleaseAssociation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Cause INPN_Cause 41 0x29 M

B.12.60 RequestReportBCUSMEvent
INOP_RequestReportBCUSMEvent
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
BCUSMEvents (0..15) M
EventType INPN_EventTypeBCUSM(n) 728 to 743 0x2d8 to 0x2e7 M2
MonitorMode INPN_MonitorMode(n) 208 to 223 0xd0 to 0xdf M2
Duration INPN_Duration 89 0x59 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
CUDPCriteria O
LocalValue INPN_LocalValue 702 0x2be C2
Global INPN_Global(0) 828 0x33c C2
LegID O
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
Ellipsis INPN_Ellipsis 112 0x70 A

246
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.12.61 InitialAssociationDP
INOP_InitialAssociationDP
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Servicekey INPN_Duration 89 0x59 M
CUApplicationInd O
LocalValue INPN_LocalValue 702 0x2be C2
Global INPN_Global(0) 828 0x33c C2
MiscCallInfo O
MessageType INPN_MessageType 56 0x38 M2
EventTypeBCUSM INPN_EventTypeBCUSM(0) 728 0x2d8 O
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O
CallingPartySubAddress INPN_CallingPartySubaddress 9 0x9 O
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x13 O
BearerCapability O
BearerCap INPN_BearerCapability 23 0x17 C2
Tmr INPN_Tmr 104 0x68 C2
USIServiceIndicator O
Global INPN_Global(0) 828 0x33c C2
Local INPN_Local(0) 844 0x34c C2
USIInformation INPN_USIInformation 704 0x2c0 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.62 ConnectAssociation
INOP_ConnectAssociation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

247
5 Non-Primitive Interface

B.12.63 ContinueAssociation
INOP_ContinueAssociation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.12.64 EventReportBCUSM
INOP_InitiateAssociation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
EventTypeBCUSM INPN_EventTypeBCUSM(0) 728 0x2d8 O
EventSpecificInformationBCUSM O
ComponentReceivedSpecificInfo C2
ComponentReceivedinfo INPN_CompRecSpecInfo 705 0x2c1 O3
AssociationReleaseRequestedSpecificInfo C2
AssociationReleaseInfo INPN_AssRelReqSpecInfo 706 0x2c2 O3
ReleaseCause INPN_ReleaseCause 96 0x60 O3
MiscCallInfo O
MessageType INPN_Messagetype 56 0x38 M2
CUApplicationInd O
LocalValue INPN_LocalValue 702 0x2be C2
Global INPN_Global(0) 828 0x33c C2
LegID O
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

248
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.13 CS1+ Operation Definitions

B.13.1 InitialDP
INOP_InitialDP
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x01 M
ServiceKey INPN_ServiceKey 3 0x03 M
CalledPartyNumber INPN_CalledPartyNumber 5 0x05 O
CallingPartyNumber INPN_CallingPartyNumber 6 0x06 O
CallingPartysCategory INPN_CallingPartysCategory 8 0x08 O
CGEncountered INPN_cGEncountered 10 0x0a O
IPSSPCapabilities INPN_IPSSPCapabilities 11 0x0b O
LocationNumber INPN_LocationNumber 13 0x0d O
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0x0f O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x13 O
IdpServiceInteractionIndictators O
ForwardServiceInteractionIndicators O2
ConferenceTreatmentInd for INPN_Fw_ConferenceTreatmentInd 711 0x2c7 O3
ForwardServiceInteractionIndica
tors
CallDiversionTreatmentInd INPN_CallDiversionTreatmentInd 712 0x2c8 O3
CallOfferingTreatmentInd INPN_CallOfferingTreatmentInd 713 0x2c9 O3
CS1+ CallTransferTreatmentInd INPN_CS1P_Fw_CallTransferTreatmentInd 4404 0x1134 O3
for
ForwardServiceInteractionIndica
tors
Ellipsis for INPN_CS1P_Fw_ServIntInd_Ellipsis 4406 0x1136 O3
ForwardServiceInteractionIndica
tors
BackwardsServiceInteractionIndictators O2
ConferenceTreatmentInd for INPN_Bw_ConferenceTreatmentInd 710 0x2c6 O3
BackwardsServiceInteractionIndi
ctators
CS1+ CallTransferTreatmentInd INPN_CS1P_Bw_CallTransferTreatmentInd 4405 0x1135 O3
for
BackwardsServiceInteractionIndi
ctators
Ellipsis for INPN_CS1P_Bw_ServIntInd_Ellipsis 4407 0x1137 O3
BackwardsServiceInteractionIndi
ctators

249
5 Non-Primitive Interface

INOP_InitialDP
Parameter Mnemonic Value
dec hex
Ellipsis for INPN_CS1P_IdpServIntInd_Ellipsis 4407 0x1137 O2
IdpServiceInteractionIndictators
AdditionalCallingParty Number INPN_AdditionalCallingParty Number 21 0x15 O
ForwardCallIndicators INPN_ForwardCallIndicators 22 0x16 O
BearerCapability O
BearerCapability INPN_CS1P_BearerCapability 4382 0x111e C1
Tmr INPN_CS1P_Tmr 4383 0x111f C1
EventTypeBCSM INPN_EventTypeBCSM(0) 192 0xc0 O
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O
RedirectionInformation INPN_RedirectionInformation 26 0x20 O
TriggerType INPN_TriggerType 18 0x12 O
CS1+ LegIDs INPN_CS1P_LegIDs 4412 0x113c O
CS1+ RouteOrigin INPN_CS1P_RouteOrigin 4413 0x113d O
CS1+ TestIndication INPN_CS1P_TestIndication 4414 0x113e O
CS1+ CUGCallIndicator INPN_CS1P_CUGCallIndicator 4384 0x1120 O
CS1+ CUGInterlockCode INPN_CS1P_CUGInterlockCode 4385 0x1121 O
CS1+ GenericDigitsSet INPN_CS1P_GenericDigitsSet 4387 0x1123 O
CS1+ GenericNumberSet INPN_CS1P_GenericNumberSet 4388 0x1124 O
CS1+ Cause INPN_CS1P_Cause 4415 0x113f O
CS1+ HandOverInfo O
CS1+ HandOverCounter INPN_CS1P_HandOverCounter 4416 0x1140 O2
CS1+ SendingSCPAddress INPN_CS1P_SendingScpAddress 4419 0x1143 O2
CS1+ SendingSCPDialogueInfo INPN_CS1P_SendingScpDlgInfo 4420 0x1144 O2
CS1+ SendingSCPCorrelatioInfo INPN_CS1P_SendingScpCorrInfo 4421 0x1145 O2
CS1+ ReceivingSCPAddress INPN_CS1P_ReceivingScpAddress 4422 0x1146 O2
CS1+ INPN_CS1P_ReceivingScpDlgInfo 4423 0x1147 O2
ReceivingSCPDialogueInfo
CS1+ INPN_CS1P_ReceivingScpCorrInfo 4424 0x1148 O2
ReceivingSCPCorrelationInfo
CS1+ HandOverNumber INPN_CS1P_HandOverNumber 4417 0x1141 O2
CS1+ HandOverData INPN_CS1P_HandOverData 4418 0x1142 O2
Ellipsis for CS1+ HandOverInfo INPN_CS1P_HandOverInfo_Ellipsis 4425 0x1149 O2
CS1+ ForwardGvnsIndicator O
CS1+ OPSPIdentification INPN_CS1P_OpspIdentification 4390 0x1126 O2
CS1+ GVNSUserGroupID INPN_CS1P_GvnsUserGroupId 4391 0x1127 O2
CS1+ TNRNumber INPN_CS1P_TnrNumber 4392 0x1128 O2

250
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_InitialDP
Parameter Mnemonic Value
dec hex
Ellipsis for CS1+ INPN_CS1P_FwdGvnsInd_Ellipsis 4393 0x1129 O2
ForwardGvnsIndicator
CS1+ BackwardGvnsIndicator INPN_CS1P_BackwardGvnsIndicator 4397 0x112d O
Ellipsis INPN_Ellipsis 112 0x70 A

B.13.2 HoldCallPartyConnection
INOP_HoldCallPartyConnection
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x01 M
LegID M
SendingSideID INPN_CS1P_SendingSideID 4380 0x111c M2
Ellipsis INPN_Ellipsis 112 0x70 A

B.13.3 Reconnect
INOP_Reconnect
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
LegID M
SendingSideID INPN_CS1P_SendingSideID 4380 0x111c M2
Ellipsis INPN_Ellipsis 112 0x70 A

B.13.4 ReleaseCallPartyConnection
INOP_ReleaseCallPartyConnection
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Leg To Be Released M
SendingSideID INPN_CS1P_SendingSideID 4380 0x111c M2
ReleaseCause INPN_CS1P_Cause 4415 0x113f O
Ellipsis INPN_Ellipsis 112 0x70 A

251
5 Non-Primitive Interface

B.13.5 AssistRequestInstructions
INOP_AssistRequestInstructions
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x01 M
CorrelationID INPN_CorrelationID 31 0x1f M
IPAvailable INPN_IPAvailable 12 0x0c O
IPSSPCapabilities INPN_IPSSPCapabilities 11 0x0b O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.13.6 Retrieve15
INOP_Retrieve
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x01 M
OperationID INPN_CS1P_OperationId 4435 0x1153 M
ApplicationID INPN_CS1P_ApplicationId 4436 0x1154 M
DataItemID INPN_CS1P_DataItemId 4437 0x1155 M
Ellipsis INPN_Ellipsis 112 0x70 A

B.13.7 EstablishTemporaryConnection
INOP_EstablishTemporaryConnection
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x01 M
CS1+ LegID O
CS1+ SendingSideID INPN_CS1P_SendingSideID 4380 0x111 O2
c
AssistingSSPIPRouting Address INPN_AssistingSSPIPRouting Address 102 0x66 M
CorrelationID INPN_CorrelationID 31 0x1f O
ScfID INPN_ScfID 38 0x26 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ETCServiceInteractionIndicators O
BackwardServiceInteractionIndictators O2

15
For the CS1+ protocol, the Retrieve and AssistRequestInstructions operations use the same op code value (16). The API
will use the presence or absence of Retrieve’s first mandatory parameter (OperationID) to determine how to encode/decode
the operation.
252
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_EstablishTemporaryConnection
ConferenceTreatmentInd for INPN_Bw_ConferenceTreatmentInd 710 0x2c6 O3
BackwardsServiceInteractionIndictators
CS1+ CallTransferTreatmentInd for INPN_CS1P_Bw_CallTransferTreatme 4405 0x1135 O3
BackwardsServiceInteractionIndictators ntInd
Ellipsis for INPN_CS1P_Bw_ServIntInd_Ellipsis 4407 0x1137 O3
BackwardsServiceInteractionIndictators
BothwayThroughConnnectIndicator INPN_CS1P_BothwayThroughConInd 4428 0x114c O2
ConnectedNumberTreatmentIndicator INPN_CS1P_ConnectedNumTreatInd 4427 0x114b O2
Ellipsis for INPN_CS1P_EtcServIntInd_Ellipsis 4434 0x1152 O2
ETCServiceInteractionIndicators
CS1+ RouteList O
CS1+ RouteIndex INPN_CS1P_RouteIndex 4394 0x112a O2
Ellipsis INPN_Ellipsis 112 0x70 A

B.13.8 DisconnectForwardConnection
INOP_DisconnectForwardConnection
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CS1+ LegID O
CS1+ SendingSideID INPN_CS1P_SendingSideID 4380 0x111c O2
CS1+ Ellipsis INPN_Ellipsis 112 0x70 A

B.13.9 ConnectToResource
INOP_ConnectToResource
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ResourceAddress M
IPRoutingAddress INPN_IPRoutingAddress 31 0x1f C2
Null n/a C2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O
Ellipsis INPN_Ellipsis 112 0x70 A

If no IPRouting address is supplied a null resource address will be formatted.

253
5 Non-Primitive Interface

B.13.10 Connect
INOP_Connect
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x01 M
CS1+ LegToBeCreated D
CS1+ SendingSideID INPN_CS1P_SendingSideID 4380 0x111c O2
CS1+ BearerCapability O
CS1+ BearerCapability INPN_CS1P_BearerCapability 4382 0x111e C1
CS1+ Tmr INPN_CS1P_Tmr 4383 0x111f C1
CS1+ CUGCallIndicator INPN_CS1P_CUGCallIndicator 4384 0x1120 O
CS1+ CUGInterlockCode INPN_CS1P_CUGInterlockCode 4385 0x1121 O
CS1+ ForwardCallIndicators INPN_CS1P_ForwardCallIndicators 4386 0x1122 O
CS1+ GenericDigitsSet INPN_CS1P_GenericDigitsSet 4387 0x1123 O
CS1+ GenericNumberSet INPN_CS1P_GenericNumberSet 4388 0x1124 O
CS1+ HighLayerCompatibility INPN_CS1P_HighLayerCompatibility 4389 0x1125 O
CS1+ ForwardGvnsIndicator O
CS1+ OPSPIdentification INPN_CS1P_OpspIdentification 4390 0x1126 O2
CS1+ GVNSUserGroupID INPN_CS1P_GvnsUserGroupId 4391 0x1127 O2
CS1+ TNRNumber INPN_CS1P_TnrNumber 4392 0x1128 O2
Ellipsis for CS1+ INPN_CS1P_FwdGvnsInd_Ellipsis 4393 0x1129 O2
ForwardGvnsIndicator
DestinationRoutingAddress O
DestinationRouting Address INPN_DestinationRouting Address(0) 27 0x1b O2
AlertingPattern INPN_AlertingPattern 30 0x1e O
CorrelationID INPN_CorrelationID 31 0x1f O
CutAndPaste INPN_CutAndPaste 32 0x20 O
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0cf O
RouteList O

RouteIndex INPN_CS1P_RouteIndex 4394 0x112a O2

ScfID INPN_ScfID 38 0x26 O

Extensions (see Appendix B.15 Operation Extensions on page 282) O

ConServiceInteractionIndictators O
ForwardServiceInteractionIndicators O2
ConferenceTreatmentInd for INPN_Fw_ConferenceTreatmentInd 711 0x2c7 O3
ForwardServiceInteraction
Indicators
CallDiversionTreatmentInd INPN_CallDiversionTreatmentInd 712 0x2c8 O3
CallOfferingTreatmentInd INPN_CallOfferingTreatmentInd 713 0x2c9 O3

254
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_Connect
Parameter Mnemonic Value
dec hex
CS1+ CallTransferTreatmentInd for INPN_CS1P_Fw_CallTransferTreatmentInd 4404 0x1134 O3
ForwardServiceInteraction
Indicators
Ellipsis for ForwardService INPN_CS1P_Fw_ServIntInd_Ellipsis 4406 0x1136 O3
InteractionIndicators
BackwardsServiceInteractionIndictators O2
ConferenceTreatmentInd for INPN_Bw_ConferenceTreatmentInd 710 0x2c6 O3
BackwardsServiceInteraction
Indictators
CS1+ CallTransferTreatmentInd for INPN_CS1P_Bw_CallTransferTreatmentInd 4405 0x1135 O3
BackwardsService
InteractionIndictators
Ellipsis for BackwardsService INPN_CS1P_Bw_ServIntInd_Ellipsis 4407 0x1137 O3
InteractionIndictators
SuspendTimer INPN_SuspendTimer 717 0x2cd O2
ConnectedNumTreatInd INPN_CS1P_ConnectedNumTreatInd 4427 0x114b O2
Ellipsis for INPN_CS1P_ConServIntInd_Ellipsis 4433 0x1151 O2
ConServiceInteractionIndictators
CallingPartyNumber INPN_CallingPartyNumber 6 0x06 O
CallingPartysCategory INPN_CallingPartysCategory 8 0x08 O
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O
RedirectionInformation INPN_RedirectionInformation 26 0x1a O
Ellipsis INPN_Ellipsis 112 0x70 A

B.13.11 ReleaseCall
INOP_ReleaseCall
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Cause INPN_Cause 41 0x29 O

B.13.12 RequestReportBCSMEvent
INOP_RequestReportBCSMEvent
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
BCSMEvents (SEQUENCE, size = 0 to 15) M
EventTypeBCSM INPN_EventTypeBCSM(n) 192 to 207 0xc0 to 0xcf M2

255
5 Non-Primitive Interface

INOP_RequestReportBCSMEvent
MonitorMode INPN_MonitorMode(n) 208 to 223 0xd0 to 0xdf M2
LegID O2
SendingSideID INPN_SendingSideID(n) 224 to 239 0xe0 to 0xef C3
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0 to 0xff C3
DPSpecificCriteria O2
NumberOfDigits INPN_NumberOfDigits(n) 160 to 175 0xa0 to 0xaf C3

ApplicationTimer INPN_ApplicationTimer(n) 176 to 191 0xb0 to 0xbf C3

Ellipsis for INPN_DPSpecCrit_Ellipsis(n) 4364 to 0x110c to C3
DPSpecificCriteria 4379 0x111b
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

The BCSMEvent structure can be repeated up to sixteen times for each

operation. Replace ‘n’ with the position in the sequence of BCSMEvents
starting from 0. The LegID for each event may be specified as either a
SendingSideID or a ReceivingSideID. For some events, the LegID parameter
is mandatory, e.g. events O-MidCall, O-Disconnect, T-MidCall and T-
Disconnect in ETSI 300 374-1 must have this parameter present. For other
events, the legID may take default values. Similarly, the DPSpecificCriteria
for each event may be specified as either NumberOfDigits or
ApplicationTimer.

B.13.13 EventReportBCSM
INOP_EventReportBCSM
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
EventTypeBCSM INPN_EventTypeBCSM(0) 192 0xc0 M
EventSpecificInformationBCSM O
CollectedInfo C1
CalledPartyNumber INPN_CalledPartyNumber 5 0x05 M2
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A2
AnalyzedInformation C1
CalledPartyNumber INPN_CalledPartyNumber 5 0x05 M2
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A2
RouteSelectFailure C1
FailureCause INPN_FailureCause 94 0x5e O2
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A2
oCalledPartyBusy C1
BusyCause INPN_BusyCause 95 0x5f O2

256
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_EventReportBCSM
Parameter Mnemonic Value
dec hex
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A2
CS1+ oCalledPartyNotReachable C1
CS1+ NotReachableCause INPN_CS1P_NotReachableCause 4395 0x112b O2
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A2
CS1+ oAlerting C1
CS1+ BackwardCallIndicators INPN_CS1P_BackwardCallIndicators 4396 0x112c O2
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A2
oNoAnswer C1
--No Info--
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A2
oAnswer C1
CS1+ TimeToAnswer INPN_CS1P_TimeToAnswer 4398 0x112e O2
CS1+ BackwardCallIndicators INPN_CS1P_BackwardCallIndicators 4396 0x112c O2
CS1+ BackwardGvnsIndicator INPN_CS1P_BackwardGvnsIndicator 4397 0x112d O2
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A2
oMidCall C1
CS1+ MidCallEventsInfo INPN_CS1P_MidCallEventsInfo 4399 0x112f O2
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A2
oDisconnect C1
ReleaseCause INPN_ReleaseCause 96 0x60 O2
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A2
CS1+ tRouteSelectFailure C1
CS1+ FailureCause INPN_FailureCause 94 0x5e O2
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A2
tCalledPartyBusy C1
BusyCause INPN_BusyCause 95 0x5f O2
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A2
CS1+ tCalledPartyNotReachable C1
CS1+ NotReachableCause INPN_CS1P_NotReachableCause 4395 0x112b O2
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A2
CS1+ tAlerting C1
CS1+ BackwardCallIndicators INPN_CS1P_BackwardCallIndicators 4396 0x112c O2
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A2
tNoAnswer C1
--No Info--

257
5 Non-Primitive Interface

INOP_EventReportBCSM
Parameter Mnemonic Value
dec hex
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A2
tAnswer C1
CS1+ TimeToAnswer INPN_CS1P_TimeToAnswer 4398 0x112e O2
CS1+ BackwardCallIndicators INPN_CS1P_BackwardCallIndicators 4396 0x112c O2
CS1+ BackwardGvnsIndicator INPN_CS1P_BackwardGvnsIndicator 4397 0x112d O2
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A2
tMidCall C1
CS1+ MidCallEventsInfo INPN_CS1P_MidCallEventsInfo 4399 0x112f O2
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A2
tDisconnect C1
ReleaseCause INPN_ReleaseCause 96 0x60 O2
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A2
LegID O
ReceivingSideID INPN_CS1P_ReceivingSideID 4381 0x111d O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
MiscCallInfo D
MessageType INPN_MessageType 56 0x38 O
Ellipsis INPN_Ellipsis 112 0x70 A

The event specific information formatted or recovered is dependent on the

value of INPN_EventTypeBCSM(0). For example, if its value is collectedInfo
(2), then the format procedures will use the parameter
INPN_CalledPartyNumber.

B.13.14 RequestNotificationChargingEvent
INOP_RequestNotificationChargingEvent
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ChargingEvent (SEQUENCE, size = 1 to 3) M
EventTypeCharging INPN_EventTypeCharging(n) 272 to 274 0x110 to 0x112 M2
MonitorMode INPN_MonitorMode(n) 208 to 210 0xd0 to 0xd2 M2
LegID O2
SendingSideID INPN_SendingSideID(n) 224 to 226 0xe0 to 0xe2 O3
Ellipsis INPN_Ellipsis 112 0x70 A

258
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.13.15 EventNotificationCharging
INOP_EventNotificationCharging
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
EventTypeCharging INPN_EventTypeCharging(0) 272 0x110 M
EventSpecificInformationCharging INPN_EventSpecificInformationCharging 58 0x3a O
LegID O
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
MonitorMode INPN_MonitorMode(0) 208 0xd0 M
Ellipsis INPN_Ellipsis 112 0x70 A

B.13.16 CollectInformation
INOP_CollectInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.13.17 Continue
INOP_Continue
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CS1+ LegID O
CS1+ SendingSideID INPN_CS1P_SendingSideID 4380 0x111c O2
Ellipsis INPN_Ellipsis 112 0x70 A

259
5 Non-Primitive Interface

B.13.18 InitiateCallAttempt
INOP_InitiateCallAttempt
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CS1+ OriginalCalledPartyID INPN_CS1P_OriginalCalledPartyID 4408 0x1138 O
CS1+ LegID D
CS1+ SendingSideID INPN_CS1P_SendingSideID 4380 0x111c O2
CS1+ CallingPartysCategory INPN_CS1P_CallingPartysCategory 4409 0x1139 O
CS1+ RedirectingPartyID INPN_CS1P_RedirectingPartyID 4410 0x113a O
CS1+ RedirectionInformation INPN_CS1P_RedirectionInformation 4411 0x113b O
CS1+ BearerCapability O
CS1+ BearerCapability INPN_CS1P_BearerCapability 4382 0x111e C1
CS1+ Tmr INPN_CS1P_Tmr 4383 0x111f C1
CS1+ CUGCallIndicator INPN_CS1P_CUGCallIndicator 4384 0x1120 O
CS1+ CUGInterlockCode INPN_CS1P_CUGInterlockCode 4385 0x1121 O
CS1+ ForwardCallIndicators INPN_CS1P_ForwardCallIndicators 4386 0x1122 O
CS1+ GenericDigitsSet INPN_CS1P_GenericDigitsSet 4387 0x1123 O
CS1+ GenericNumberSet INPN_CS1P_GenericNumberSet 4388 0x1124 O
CS1+ HighLayerCompatibility INPN_CS1P_HighLayerCompatibility 4389 0x1125 O
CS1+ ForwardGvnsIndicator O
CS1+ OPSPIdentification INPN_CS1P_OpspIdentification 4390 0x1126 O2
CS1+ GVNSUserGroupID INPN_CS1P_GvnsUserGroupId 4391 0x1127 O2
CS1+ TNRNumber INPN_CS1P_TnrNumber 4392 0x1128 O2
Ellipsis for CS1+ INPN_CS1P_FwdGvnsInd_Ellipsis 4393 0x1129 O2
ForwardGvnsIndicator
DestinationRouting Address M
DestinationRouting Address INPN_DestinationRouting Address(0) 27 0x1b M2
AlertingPattern INPN_AlertingPattern 30 0x1e O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
ICAServiceInteractionIndicators O
ForwardServiceInteractionIndicators O2
ConferenceTreatmentInd for INPN_Fw_ConferenceTreatmentInd 711 0x2c7 O3
ForwardServiceInteractionIndicators
CallDiversionTreatmentInd INPN_CallDiversionTreatmentInd 712 0x2c8 O3
CallOfferingTreatmentInd INPN_CallOfferingTreatmentInd 713 0x2c9 O3
CS1+ CallTransferTreatmentInd for INPN_CS1P_Fw_CallTransferTreatmentInd 4404 0x1134 O3
ForwardServiceInteractionIndicators
Ellipsis for INPN_CS1P_Fw_ServIntInd_Ellipsis 4406 0x1136 O3
ForwardServiceInteractionIndicators

260
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_InitiateCallAttempt
Parameter Mnemonic Value
dec hex
SuspendTimer INPN_SuspendTimer 717 0x2cd O2
Ellipsis for INPN_CS1P_IcaServIntInd_Ellipsis 4432 0x1150 O2
ICAServiceInteractionIndicators
CallingPartyNumber INPN_CallingPartyNumber 6 0x06 O
CS1+ RouteList O
CS1+ RouteIndex INPN_CS1P_RouteIndex 4394 0x112a O2
Ellipsis INPN_Ellipsis 112 0x70 A

B.13.19 ResetTimer
INOP_ResetTimer
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
TimerID INPN_TimerID 61 0x3d M
TimerValue INPN_TimerValue 62 0x3e M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.13.20 FurnishChargingInformation
INOP_FurnishChargingInformation
Parameter Mnemonic Value
dec hex
InvokeId INPN_InvokeId 1 0x1 M
FurnishCharging Information INPN_FCIBillingChargingCharacteristics 34 0x22 M

B.13.21 ApplyCharging
INOP_ApplyCharging
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
AchBillingCharging INPN_AchBillingCharging 52 0x34 M
Characteristics Characteristics
SendCalculationToSCP INPN_SendCalculationToSCP 53 0x35 D
Indication Indication

PartyToCharge O

261
5 Non-Primitive Interface

INOP_ApplyCharging
Parameter Mnemonic Value
dec hex
SendingSideID INPN_SendingSideID(0) 224 0xe0 O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.13.22 ApplyChargingReport
INOP_ApplyChargingReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
CallResult INPN_CallResult 55 0x37 M

B.13.23 CallGap
INOP_CallGap
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
GapCriteria M
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 C2
GapOnService C2
ServiceKey INPN_ServiceKey 3 0x3 M3
CalledAddressAndService C2
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3
ServiceKey INPN_ServiceKey 3 0x3 M3
CallingAddressAndService C2
CallingAddressValue INPN_CallingAddressValue 99 0x63 M3
ServiceKey INPN_ServiceKey 3 0x3 M3
LocationNumber INPN_LocationNumber 13 0xd O3
GapIndicators M
Gap Duration INPN_Gap_Duration 72 0x48 M2
GapInterval INPN_GapInterval 73 0x49 M2
ControlType INPN_ControlType 101 0x65 O
GapTreatment O
InformationToSend C2
See InformationToSend (Sub-table) on page 100.
ReleaseCause INPN_ReleaseCause 96 0x60 C2

262
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_CallGap
Parameter Mnemonic Value
dec hex
Both C2
InformationToSend M3
See InformationToSend (Sub-table) on page 100.
ReleaseCause INPN_ReleaseCause 96 0x60 M3
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.13.24 ActivateServiceFiltering
INOP_ActivateServiceFiltering
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
FilteredCallTreatment M
SFBillingCharging INPN_SFBillingCharging 92 0x5c M2
Characteristics Characteristics
InformationToSend O2
See InformationToSend (Sub-table) on page 100.
MaximumNumberOf Counters INPN_MaximumNumberOf Counters 93 0x5d O2
ReleaseCause INPN_ReleaseCause 96 0x60 O2
FilteringCharacteristics M
Interval INPN_Interval 90 0x5a C2
NumberOfCalls INPN_NumberOfCalls 97 0x61 C2
FilteringTimeout M
Filtering Duration INPN_Filtering_Duration 98 0x62 C2
StopTime INPN_StopTime 100 0x64 C2
FilteringCriteria M
ServiceKey INPN_ServiceKey 3 0x3 C2
AddressAndService C2
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3
ServiceKey INPN_ServiceKey 3 0x3 M3
CallingAddressValue INPN_CallingAddressValue 99 0x63 O3
LocationNumber INPN_LocationNumber 13 0xd O3
StartTime O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

263
5 Non-Primitive Interface

B.13.25 ServiceFilteringResponse
INOP_ServiceFilteringResponse
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x01 M
CountersValue (SEQUENCE, size = 1 to 100) M
CounterID INPN_CounterID 328 0x148 M2
to to
427 0x1ab
CounterValue INPN_CounterValue 428 0x1ac M2
to to
527 0x20f
FilteringCriteria M
ServiceKey INPN_ServiceKey 3 0x03 C2
AddressAndService C2
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3
ServiceKey INPN_ServiceKey 3 0x03 M3
CallingAddressValue INPN_CallingAddressValue 99 0x63 O3
LocationNumber INPN_LocationNumber 13 0x0d O3
Ellipsis INPN_Ellipsis 112 0x70 A

B.13.26 CallInformationReport
INOP_CallInformationReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
RequestedInformationReport (SEQUENCE, size = 1 to 5) M
RequestedInformationType INPN_RequestedInformationType 288 0x120 M2
to to
292 0x124
RequestedInformationValue M2
CallAttemptEllapsedTimeValue INPN_CallAttemptEllapsedTimeValue(n) 293 0x125 C3
to to
297 0x129
CallStopTimeValue INPN_CallStopTimeValue(n) 298 0x12a C3
to to
302 0x12e
CallConnectedElapsedTimeValue INPN_CallConnectedElapsedTimeValue(n) 303 0x12f to C3
to 0x133
307
CalledAddressValue INPN_CalledAddressValue(n) 308 0x134 C3
to to
312 0x138

264
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_CallInformationReport
Parameter Mnemonic Value
dec hex
ReleaseCauseValue INPN_ReleaseCauseValue(in 313 0x139 C3
to to
317 0x13d
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.13.27 CallInformationRequest
INOP_CallInformationReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
RequestedInformationReport (SEQUENCE, size = 1 to 5) M
RequestedInformationType INPN_RequestedInformationType 288 0x120 M2
to to
292 0x124
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.13.28 SendChargingInformation
INOP_SendChargingInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
SCIBillingCharging INPN_SCIBillingCharging 87 0x57 M
Characteristics Characteristics
LegID M
SendingSideID INPN_SendingSideID(0) 224 0xe0 O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.13.29 PlayAnnouncement
INOP_PlayAnnouncement
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x01 M
CS1+ LegID O

265
5 Non-Primitive Interface

CS1+ SendingSideID INPN_CS1P_SendingSideID 4380 0x111c O2

CS1+ RequestAnnouncementStarted INPN_CS1P_RequestAnnouncementStarted 4400 0x1130 D
InformationToSend O
InbandInfo C2
MessageID INPN_CS1P_MessageId 4402 0x1132 M3
NumberOfRepetitions INPN_NumberOfRepetitions 88 0x58 O3
Duration INPN_Duration 89 0x59 O3
Interval INPN_Interval 90 0x5a O3
Tone C2
ToneID INPN_ToneID 64 0x40 M3
Duration INPN_Duration 89 0x59 O3
DisplayInformation INPN_DisplayInformation 91 0x5b C2
CS1+ TextID INPN_CS1P_TextId 4429 0x114d C2
DisconnectFromIP Forbidden INPN_DisconnectFromIP Forbidden 59 0x3b D
RequestAnnouncement Complete INPN_RequestAnnouncement Complete 60 0x3c D
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.13.30 PromptAndCollectUserInformation
INOP_ PromptAndCollectUserInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x01 M
CS1+ LegID
CS1+ SendingSideID INPN_CS1P_SendingSideID 4380 0x111c O2
CS1+ INPN_CS1P_RequestAnnouncementStarted 4400 0x1130 D
RequestAnnouncementStarted
CS1+ RequestAnnouncement INPN_CS1P_RequestAnnouncementComplete 4401 0x1131 D
Complete
CollectedInfo M
CollectedDigits M2
MinimumNumberOfDigits INPN_MinimumNumberOfDigits 74 0x3b D3
MaximumNumberOf Digits INPN_MaximumNumberOf Digits 75 0x3c M3
EndOfReplyDigit INPN_EndOfReplyDigit 76 0x3d O3
CancelDigit INPN_CancelDigit 77 0x3e O3
StartDigit INPN_StartDigit 78 0x3f O3
FirstDigitTimeOut INPN_FirstDigitTimeOut 79 0x40 O3
InterDigitTimeOut INPN_InterDigitTimeOut 80 0x41 O3
Errortreatment INPN_Errortreatment 81 0x42 D3

266
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_ PromptAndCollectUserInformation
Parameter Mnemonic Value
dec hex
InterDigitTimeOut INPN_InterDigitTimeOut 82 0x43 D3
InterruptableAndInd INPN_InterruptableAnnInd 83 0x44 D3
VoiceBack INPN_VoiceBack 84 0x45 D3
CS1+ Total_ElapsedTimeout INPN_CS1P_Total_ElapsedTimeout 4403 0x1133 O3
Ellipsis for CollectedDigits INPN_CS1P_CollectedDigits_Ellipsis 4430 0x114e A3
DisconnectFromIP Forbidden INPN_DisconnectFromIP Forbidden 59 0x3b D
InformationToSend O
InbandInfo C2
MessageID INPN_CS1P_MessageId 4402 0x1132 M3
NumberOfRepetitions INPN_NumberOfRepetitions 88 0x58 O3
Duration INPN_Duration 89 0x59 O3
Interval INPN_Interval 90 0x5a O3
Tone C2
ToneID INPN_ToneID 64 0x40 M3
Duration INPN_Duration 89 0x59 O3
DisplayInformation INPN_DisplayInformation 91 0x5b C2
CS1+ TextID INPN_CS1P_TextId 4429 0x114d C2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

B.13.31 SpecializedResourceReport
INOP_ SpecializedResourceReport
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x01 M
LinkedID INPN_LinkedID 2 0x02 O
CS1+ AnnouncementStarted INPN_CS1P_AnnouncementStarted 4426 0x114a O

If the parameter INPN_CS1P_AnnouncementStarted is not set, then the

operation will be sent with the null parameter indicating ‘Announcement
Completed’.

267
5 Non-Primitive Interface

B.13.32 Cancel
INOP_Cancel
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x01 M
Cancel_InvokeID INPN_Cancel_InvokeID 86 0x56 O

If the parameter INPN_Cancel_InvokeID is not set, then the operation will be

sent with the null parameter ‘All Requests’ indicating all operations on that
dialogue should be cancelled.

B.13.33 ActivityTest
INOP_ ActivityTest
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x01 M

268
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.14 AIN Operation Definitions

B.14.1 AnalyzeRoute
AINOP_AnalyzeRoute
Parameter Mnemonic Value
dec hex
InvokeID AINPN_InvokeID 1 0x1 M
ChargeNumber AINPN_ChargeNumber 6 0x6 O
CallingPartyID AINPN_CallingPartyID 7 0x7 O
ChargePartyStationType AINPN_ChargePartyStationType 8 0x8 O
CalledPartyID AINPN_CalledPartyID 3 0x3 O
OutpulseNumber AINPN_OutpulseNumber 50 0x32 O
Tcm AINPN_Tcm 13 0xd O
PrimaryTrunkGroup AINPN_PrimaryTrunkGroup 51 0x33 O
AlternateTrunkGroup AINPN_AlternateTrunkGroup 52 0x34 O
SecondAlternateTrunkGroup AINPN_SecondAlternateTrunkGroup 53 0x35 O
PassiveLegTreatment AINPN_PassiveLegTreatment 56 0x38 O
RedirectingPartyID AINPN_RedirectingPartyID 548 0x224 O
PrimaryBillingIndicator AINPN_PrimaryBillingInd 57 0x39 O
AlternateBillingIndicator AINPN_AlternateBillingInd 58 0x3a O
SecondAlternateBillingIndicator AINPN_SecondAlternateBillingInd 59 0x3b O
OverflowBillingIndicator AINPN_OverflowBillingInd 60 0x3c O
AMAAlternateBillingNumber AINPN_AMAAlternateBillingNumber 61 0x3d O
AMABusinessCustomerID AINPN_AMABusinessCustomerID 62 0x3e O
AMALineNumberList (SEQUENCE, size = 0 to 1) O
AMALineNumber AINPN_AMALineNumber 69 to 70 0x45 to M2
0x46
AMAslpID AINPN_AMAslpID 63 0x3f O
AMADigitsDialedWCList (SEQUENCE, size = 0 to 4) O
AMADigitsDialedWC AINPN_AMADigitsDialedWC 71 to 75 0x47 to M2
0x4b
Amp1 AINPN_Amp1 15 0xf O
Amp2 O
AmpAINNodeID M2
SpcID AINPN_SpcID 32 0x20 C3
ISDNDeviceID AINPN_ISDNDeviceID 33 0x21 C3
AmpClogSeqNo AINPN_AmpClogSeqNo 34 0x22 O2

269
5 Non-Primitive Interface

AINOP_AnalyzeRoute
Parameter Mnemonic Value
dec hex
AmpCLogRepInd AINPN_AmpCLogRepInd 35 0x23 O2
AmpCallProgInd AINPN_AmpCallProgInd 36 0x24 O2
AmpTestReqInd AINPN_AmpTestReqInd 37 0x25 O2
AmpCLogName AINPN_AmpCLogName 38 0x26 O2
AmpSvcProvID AINPN_AmpSvcProvID 39 0x27 O2
ServiceProviderID O
Ocn AINPN_Ocn 553 0x229 C2
MsrID AINPN_MsrID 554 0x22a C2
ServiceContext AINPN_ServiceContext 64 0x40 O
AMABillingFeature AINPN_AMABillingFeature 65 0x41 O
AMASequenceNumber AINPN_AMASequenceNumber 18 0x12 O
RedirectionInformation AINPN_RedirectionInformation 549 0x225 O
CarrierUsage AINPN_CarrierUsage 66 0x42 O
ExtensionParameter O
GenericAddressList (SEQUENCE, size = 0 to 4) O
GenericAddress AINPN_GenericAddress 40 to 44 0x28 to M2
0x2c
NetworkSpecificFacilities AINPN_NetworkSpecificFacilities 19 0x13 O
CallingPartyBGID AINPN_CallingPartyBGID 546 0x222 O
ForwardCallIndicators AINPN_ForwardCallIndicators 550 226 O
AMAServiceProvider AINPN_AMAServiceProviderID 67 0x43 O
Prefix AINPN_Prefix 22 0x16 O
GenericDigitsList (SEQUENCE, size = 0 to 4) O
GenericDigits AINPN_GenericDigits 45 to 49 0x2d to M2
0x31
ApplyRestrictions AINPN_ApplyRestrictions 68 0x44 O
DisplayText (SEQUENCE, size = 0 to 14) O
DisplayInformation M2
Blank AINPN_Blank 76 to 90 0x4c to C3
0x5a
Skip AINPN_Skip 91 to 105 0x5b to C3
0x69
Continuation AINPN_Continuation 106 to 0x6a to C3
120 0x78
CalledAddress AINPN_CalledAddress 121 to 0x79 to C3
135 0x87
Cause AINPN_Cause 136 to 0x88 to C3
150 0x96

270
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

AINOP_AnalyzeRoute
Parameter Mnemonic Value
dec hex
ProgressInd AINPN_ProgressInd 151 to 0x97 to C3
165 0xa5
NotificationInd AINPN_NotificationInd 166 to 0xa6 to C3
180 0xb4
Prompt AINPN_Prompt 181 to 0xb5 to C3
195 0xc3
AccumulatedDigits AINPN_AccumulatedDigits 196 to 0xc4 to C3
210 0xd2
Status AINPN_Status 211 to 0xd3 to C3
225 0xe1
Inband AINPN_Inband 226 to 0xe2 to C3
240 0xf0
CallingAddress AINPN_CallingAddress 241 to 0xf1 to C3
255 0xff
Reason AINPN_Reason 256 to 100 to C3
270 0x10e
CallingPartyName AINPN_CallingPartyName 271 to 0x10f C3
285 to
0x11d
CalledPartyName AINPN_CalledPartyName 286 to 0x11e C3
300 to x12c
OriginalCalledName AINPN_OrigCalledName 301 to 0x12d C3
315 to
0x13b
RedirectingName AINPN_RedirectingName 316 to 0x13c C3
330 to
0x14a
ConnectedName AINPN_ConnectedName 331 to 0x14b C3
345 to
0x159
OrigRestrictions AINPN_OrigRestrictions 346 to 0x15a C3
360 to
0x168
DateTimeOfDay AINPN_DateTimeOfDay 361 to 0x169 C3
375 to
0x177
CallAppearanceID AINPN_CallAppearanceID 376 to 0x178 C3
390 to
0x186
FeatureAddress AINPN_FeatureAddress 391 to 0x187 C3
405 to
0x195
RedirectionName AINPN_RedirectionName 406 to 0x196 C3
420 to
0x1a4

271
5 Non-Primitive Interface

AINOP_AnalyzeRoute
Parameter Mnemonic Value
dec hex
RedirectionNumber AINPN_RedirectionNumber 421 to 0x1a5 C3
435 to
0x1b3
RedirectingNumber AINPN_RedirectingNumber 436 to 0x1b4 C3
450 to
0x1c2
OriginalCalledNumber AINPN_OrigCalledNumber 451 to 0x1c3 C3
465 to
0x1d1
ConnectedNumber AINPN_ConnectedNumber 466 to 0x1d2 C3
480 to
0x1e0
Text AINPN_Text 481 to 0x1e1 C3
495 to
0x1ef
RedirectingReason AINPN_RedirectingReason 496 to 0x1f0 C3
510 to
0x1fe
GenericName AINPN_GenericName 551 0x227 O

B.14.2 InfoAnalyzed
AINOP_InfoAnalyzed
Parameter Mnemonic Value
dec hex
InvokeID AINPN_InvokeID 1 0x1 M
UserID M
Dn AINPN_Dn 26 0x1a C2
BRI C2
Spid AINPN_Spid 25 0x19 M3
Dn AINPN_Dn 26 0x1a M3
TrunkGroupID AINPN_TrunkGroupId 27 0x1b C2
PrivateFacilityGID AINPN_PrivateFacilityGID 28 0x1c C2
ADSIcpeID AINPN_ADSIcpeID 29 0x1d C2
Ssp AINPN_Ssp 30 0x1e C2
DialingPlan AINPN_DialingPlan 31 0x1f C2
BearerCapability AINPN_BearerCapability 545 0x221 M
CalledPartyID AINPN_CalledPartyID 3 0x3 O
Lata AINPN_Lata 4 0x4 O
TriggerCriteriaType AINPN_TriggerCritType 5 0x5 O
ChargeNumber AINPN_ChargeNumber 6 0x6 O

272
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

AINOP_InfoAnalyzed
Parameter Mnemonic Value
dec hex
CallingPartyID AINPN_CallingPartyID 7 0x7 O
CallingPartyBGID AINPN_CallingPartyBGID 546 0x222 O
ChargePartyStationType AINPN_ChargePartyStationType 8 0x8 O
Carrier AINPN_Carrier 552 0x228 O
AccessCode AINPN_AccessCode 9 0x9 O
CollectedAddressInfo AINPN_CollectedAddressInfo 10 0xa O
VerticalServiceCode AINPN_VerticalServiceCode 12 0xc O
Tcm AINPN_Tcm 13 0xd O
OriginalCalledPartyID AINPN_OriginalCalledPartyID 547 0x223 O
RedirectingPartyID AINPN_RedirectingPartyID 548 0x224 O
RedirectionInformation AINPN_RedirectionInformation 549 0x225 O
ACGEncountered AINPN_ACGEncountered 14 0xe O
Amp1 AINPN_Amp1 15 0xf O
Amp2 O
AmpAINNodeID M2
SpcID AINPN_SpcID 32 0x20 C3
ISDNDeviceID AINPN_ISDNDeviceID 33 0x21 C3
AmpClogSeqNo AINPN_AmpClogSeqNo 34 0x22 O2
AmpCLogRepInd AINPN_AmpCLogRepInd 35 0x23 O2
AmpCallProgInd AINPN_AmpCallProgInd 36 0x24 O2
AmpTestReqInd AINPN_AmpTestReqInd 37 0x25 O2
AmpCLogName AINPN_AmpCLogName 38 0x26 O2
AmpSvcProvID AINPN_AmpSvcProvID 39 0x27 O2
Sap AINPN_Sap 16 0x10 O
STRConnection AINPN_STRConnection 17 0x11 O
AMASequenceNumber AINPN_AMASequenceNumber 18 0x12 O
ExtensionParameter O
GenericAddressList (SEQUENCE, size = 0 to 4) O
GenericAddress AINPN_GenericAddress 40 0x28 M2
to to 0x2c
44
NetworkSpecificFacilities AINPN_NetworkSpecificFacilities 19 0x13 O
CTRConnection AINPN_CTRConnection 20 0x14 O
JurisdictionInformation AINPN_JurisdictionInformation 21 0x15 O
Prefix AINPN_Prefix 22 0x16 O
GenericDigitsList (SEQUENCE, size = 0 to 4) O

273
5 Non-Primitive Interface

AINOP_InfoAnalyzed
Parameter Mnemonic Value
dec hex
GenericDigits AINPN_GenericDigits 45 0x2d M2
to to 0x31
49
CallingGeodeticLocation AINPN_CallingGeodeticLocation 23 0x17 O
TriggerInformation AINPN_TriggerInformation 24 0x18 O

B.14.3 InfoCollected
AINOP_InfoCollected
Parameter Mnemonic Value
dec hex
InvokeID AINPN_InvokeID 1 0x1 M
UserID M
Dn AINPN_Dn 26 0x1a C2
BRI C2
Spid AINPN_Spid 25 0x19 M3
Dn AINPN_Dn 26 0x1a M3
TrunkGroupID AINPN_TrunkGroupId 27 0x1b C2
PrivateFacilityGID AINPN_PrivateFacilityGID 28 0x1c C2
ADSIcpeID AINPN_ADSIcpeID 29 0x1d C2
Ssp AINPN_Ssp 30 0x1e C2
DiallingPlan AINPN_DiallingPlan 31 0x1f C2
BearerCapability AINPN_BearerCapability 545 0x221 M
ChargeNumber AINPN_ChargeNumber 6 0x6 O
Lata AINPN_Lata 4 0x4 O
TriggerCriteriaType AINPN_TriggerCritType 5 0x5 O
CallingPartyID AINPN_CallingPartyID 7 0x7 O
ChargePartyStationType AINPN_ChargePartyStationType 8 0x8 O
AccessCode AINPN_AccessCode 9 0x9 O
CollectedAddressInfo AINPN_CollectedAddressInfo 10 0xa O
VerticalServiceCode AINPN_VerticalServiceCode 12 0xc O
Tcm AINPN_Tcm 13 0xd O
OriginalCalledPartyID AINPN_OriginalCalledPartyID 547 0x223 O
RedirectingPartyID AINPN_RedirectingPartyID 548 0x224 O
RedirectionInformation AINPN_RedirectionInformation 549 0x225 O
ACGEncountered AINPN_ACGEncountered 14 0xe O
Amp1 AINPN_Amp1 15 0xf O

274
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

AINOP_InfoCollected
Parameter Mnemonic Value
dec hex
Amp2 O
AmpAINNodeID M2
SpcID AINPN_SpcID 32 0x20 C3
ISDNDeviceID AINPN_ISDNDeviceID 33 0x21 C3
AmpClogSeqNo AINPN_AmpClogSeqNo 34 0x22 O2
AmpCLogRepInd AINPN_AmpCLogRepInd 35 0x23 O2
AmpCallProgInd AINPN_AmpCallProgInd 36 0x24 O2
AmpTestReqInd AINPN_AmpTestReqInd 37 0x25 O2
AmpCLogName AINPN_AmpCLogName 38 0x26 O2
AmpSvcProvID AINPN_AmpSvcProvID 39 0x27 O2
Sap AINPN_Sap 16 0x10 O
GenericAddressList (SEQUENCE, size = 0 to 4) O
GenericAddress AINPN_GenericAddress 40 0x28 M2
to 44 to 0x2c
AMASequenceNumber AINPN_AMASequenceNumber 18 0x12 O
ExtensionParameter O
Prefix AINPN_Prefix 22 0x16 O
GenericDigitsList (SEQUENCE, size = 0 to 4) O
GenericDigits AINPN_GenericDigits 45 0x2d M2
to 49 to 0x31
CallingGeodeticLocation AINPN_CallingGeodeticLocation 23 0x17 O
TriggerInformation AINPN_TriggerInformation 24 0x18 O

275
5 Non-Primitive Interface

B.14.4 Disconnect
AINOP_Disconnect
Parameter Mnemonic Value
dec hex
InvokeID AINPN_InvokeID 1 0x1 M
PrimaryBillingIndicator AINPN_PrimaryBillingInd 57 0x39 O
AMAAlternateBillingNumber AINPN_AMAAlternateBillingNumber 61 0x3d O
AMABusinessCustomerID AINPN_AMABusinessCustomerID 62 0x3e O
AMALineNumberList (SEQUENCE, size = 0 to 1) O
AMALineNumber AINPN_AMALineNumber 69 to 0x45 to M2
70 0x46
AMAslpID AINPN_AMAslpID 63 0x3f O
AMADigitsDialedWCList (SEQUENCE, size = 0 to 4) O
AMADigitsDialedWC AINPN_AMADigitsDialedWC 71 to 0x47 to M2
75 0x4b
Amp1 AINPN_Amp1 15 0xf O
Amp2 O
AmpAINNodeID M2
SpcID AINPN_SpcID 32 0x20 C3
ISDNDeviceID AINPN_ISDNDeviceID 33 0x21 C3
AmpClogSeqNo AINPN_AmpClogSeqNo 34 0x22 O2
AmpCLogRepInd AINPN_AmpCLogRepInd 35 0x23 O2
AmpCallProgInd AINPN_AmpCallProgInd 36 0x24 O2
AmpTestReqInd AINPN_AmpTestReqInd 37 0x25 O2
AmpCLogName AINPN_AmpCLogName 38 0x26 O2
AmpSvcProvID AINPN_AmpSvcProvID 39 0x27 O2
ServiceProviderID O
Ocn AINPN_Ocn 553 0x229 C2
MsrID AINPN_MsrID 554 0x22a C2
ServiceContext AINPN_ServiceContext 64 0x40 O
AMABillingFeature AINPN_AMABillingFeature 65 0x41 O
AMASequenceNumber AINPN_AMASequenceNumber 18 0x12 O
ExtensionParameter O
AMAServiceProvider AINPN_AMAServiceProviderID 67 0x43 O
RTPReroutingNumber AINPN_RTPReroutingNumber 511 0x1ff O

276
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.14.5 SendToResource
AINOP_SendToResource
Parameter Mnemonic Value
dec hex
InvokeID AINPN_InvokeID 1 0x1 M
ResourceType AINPN_ResourceType 515 0x203 M
StrParameterBlock M
AnnouncementBlock C2
UninterAnnounceBlock (SEQUENCE, size = 0 to 9) O3
AnnounceElement AINPN_AnnounceElement0 524 to 0x20c to M4
533 0x215
InterAnnounceBlock (SEQUENCE, size = 0 to 9) O3
AnnounceElement AINPN_AnnounceElement1 534 to 0x216 to M4
543 0x21f
AnnouncementDigitBlock C2
MaximumDigits AINPN_MaximumDigits 523 0x20b M3
UninterAnnounceBlock (SEQUENCE, size = 0 to 9) O3
AnnounceElement AINPN_AnnounceElement0 524 to 0x20c to M4
533 0x215
InterAnnounceBlock (SEQUENCE, size = 0 to 9) O3
AnnounceElement AINPN_AnnounceElement1 534 to 0x216 to M4
543 0x21f
FlexParameterBlock AINPN_FlexParameterBlk 522 0x20a C2
DisconnectFlag AINPN_DisconnectFlag 516 0x204 O
AnswerIndicator AINPN_AnswerIndicator 517 0x205 O
PrimaryBillingIndicator AINPN_PrimaryBillingInd 57 0x39 O
AMAAlternateBillingNumber AINPN_AMAAlternateBillingNumber 61 0x3d O
AMABusinessCustomerID AINPN_AMABusinessCustomerID 62 0x3e O
AMALineNumberList (SEQUENCE, size = 0 to 1) O
AMALineNumber AINPN_AMALineNumber 69 to 0x45 to M2
70 0x46
AMAslpID AINPN_AMAslpID 63 0x3f O
AMADigitsDialedWCList (SEQUENCE, size = 0 to 4) O
AMADigitsDialedWC AINPN_AMADigitsDialedWC 71 to 0x47 to M2
75 0x4b
Amp1 AINPN_Amp1 15 0xf O
Amp2 O
AmpAINNodeID M2
SpcID AINPN_SpcID 32 0x20 C3
ISDNDeviceID AINPN_ISDNDeviceID 33 0x21 C3

277
5 Non-Primitive Interface

AINOP_SendToResource
Parameter Mnemonic Value
dec hex
AmpClogSeqNo AINPN_AmpClogSeqNo 34 0x22 O2
AmpCLogRepInd AINPN_AmpCLogRepInd 35 0x23 O2
AmpCallProgInd AINPN_AmpCallProgInd 36 0x24 O2
AmpTestReqInd AINPN_AmpTestReqInd 37 0x25 O2
AmpCLogName AINPN_AmpCLogName 38 0x26 O2
AmpSvcProvID AINPN_AmpSvcProvID 39 0x27 O2
DestinationAddress AINPN_DestinationAddress 512 0x200 O
DPConverter AINPN_DPConverter 513 0x201 O
AMAMeasure AINPN_AMAMeasure 514 0x202 O
ServiceProviderID O
Ocn AINPN_Ocn 553 229 C2
MsrID AINPN_MsrID 554 0x22a C2
ServiceContext AINPN_ServiceContext 64 0x40 O
AMABillingFeature AINPN_AMABillingFeature 65 0x41 O
AMASequenceNumber AINPN_AMASequenceNumber 18 0x12 O
ExtensionParameter O
AMAServiceProvider AINPN_AMAServiceProviderID 67 0x43 O
ExtendedRinging AINPN_ExtendedRinging 518 0x206 O
Carrier AINPN_Carrier 552 0x228 O
AlternateCarrier AINPN_AlternateCarrier 54 0x36 O
SecondAlternateCarrier AINPN_SecondAlternateCarrier 55 0x37 O
CarrierUsage AINPN_CarrierUsage 66 0x42 O
ChargeNumber AINPN_ChargeNumber 6 0x6 O
ChargePartyStationType AINPN_ChargePartyStationType 8 0x8 O
TSTRCTimer AINPN_TSTRCTimer 519 0x207 O
PartyID AINPN_PartyID 520 0x208 O
PartyOnHold AINPN_PartyOnHold 521 0x209 O
CalledPartyID AINPN_CalledPartyID 3 0x3 O

278
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.14.6 ResourceClear
AINOP_ResourceClear
Parameter Mnemonic Value
dec hex
InvokeID AINPN_InvokeID 1 0x01
ClearCause AINPN_ClearCause 631 0x277
CollectedDigits AINPN_CollectedDigits 11 0x0b
CollectedAddressInfo AINPN_CollectedAddressInfo 10 0x0a
Carrier AINPN_Carrier 552 0x228
FailureCause AINPN_FailureCause 632 0x278
Amp1 AINPN_Amp1 15 0x0f
Amp2
AmpAINNodeID
SpcID AINPN_SpcID 32 0x20
ISDNDeviceID AINPN_ISDNDeviceID 33 0x21
AmpClogSeqNo AINPN_AmpClogSeqNo 34 0x22
AmpCLogRepInd AINPN_AmpCLogRepInd 35 0x23
AmpCallProgInd AINPN_AmpCallProgInd 36 0x24
AmpTestReqInd AINPN_AmpTestReqInd 37 0x25
AmpCLogName AINPN_AmpCLogName 38 0x26
AmpSvcProvID AINPN_AmpSvcProvID 39 0x27
AMAMeasurement
AMATimeDuration AINPN_AMATimeDuration 637 0x27d
AMATimeGuard AINPN_AMATimeGuard 638 0x27e
ClearCauseData AINPN_ClearCauseData 634 0x27a
IPReturnBlock AINPN_IPReturnBlock 635 0x27b
ExtensionParameter

B.14.7 SendNotification
AINOP_SendNotification
Parameter Mnemonic Value
dec hex
InvokeID AINPN_InvokeID 1 0x01 M
EchoData AINPN_EchoData 639 0x27f M
ExtensionParameter O

279
5 Non-Primitive Interface

B.14.8 TerminationAttempt
AINOP_TerminationAttempt
Parameter Mnemonic Value
dec hex
InvokeID AINPN_InvokeID 1 0x01 M
UserID M
Dn AINPN_Dn 26 0x1a C2
BRI C2
Spid AINPN_Spid 25 0x19 M3
Dn AINPN_Dn 26 0x1a M3
TrunkGroupID AINPN_TrunkGroupID 27 0x1b C2
PrivateFacilityGID AINPN_ PrivateFacilityGID 28 0x1c C2
ADSIcpeID AINPN_ ADSIcpeID 29 0x1d C2
Ssp AINPN_Ssp 30 0x1e C2
DialingPlan AINPN_DialingPlan 31 0x1f C2
BearerCapability AINPN_BearerCapability 545 0x221 M
CalledPartyID AINPN_CalledPartyID 3 0x03 O
Lata AINPN_Lata 4 0x04 O
TriggerCriteriaType AINPN_ TriggerCriteriaType 5 0x05 O
CalledPartyStationType AINPN_ CalledPartyStationType 630 0x276 O
ChargeNumber AINPN_ ChargeNumber 6 0x06 O
CallingPartyID AINPN_ CallingPartyID 7 0x07 O
ChargePartyStationType AINPN_ ChargePartyStationType 8 0x08 O
Tcm AINPN_Tcm 13 0x0d O
OriginalCalledPartyID AINPN_ OriginalCalledPartyID 547 0x223 O
RedirectingPartyID AINPN_ RedirectingPartyID 548 0x224 O
RedirectionInformation AINPN_ RedirectionInformation 549 0x225 O
GenericName AINPN_ GenericName 551 0x227 O
ACGEncountered AINPN_ ACGEncountered 14 0x0e O
Amp1 AINPN_Amp1 15 0x0f O
Amp2 O
AmpAINNodeID M2
SpcID AINPN_SpcID 32 0x20 C3
ISDNDeviceID AINPN_ISDNDeviceID 33 0x21 C3
AmpClogSeqNo AINPN_AmpClogSeqNo 34 0x22 O2
AmpCLogRepInd AINPN_AmpCLogRepInd 35 0x23 O2
AmpCallProgInd AINPN_AmpCallProgInd 36 0x24 O2
AmpTestReqInd AINPN_AmpTestReqInd 37 0x25 O2

280
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

AINOP_TerminationAttempt
Parameter Mnemonic Value
dec hex
AmpCLogName AINPN_AmpCLogName 38 0x26 O2
AmpSvcProvID AINPN_AmpSvcProvID 39 0x27 O2
Sap AINPN_Sap 16 0x10 O
STRConnection AINPN_ STRConnection 17 0x11 O
AMASequenceNumber AINPN_ AMASequenceNumber 18 0x12 O
ExtensionParameter O
CTRConnection AINPN_ CTRConnection 20 0x14 O
RTPServiceIndicator AINPN_ RTPServiceIndicator 636 0x27c O
GenericAddressList (SEQUENCE, size 0 to 4) O
GenericAddress AINPN_GenericAddress 40 to 44 0x28 to 0x2c M2
GenericDigitList (SEQUENCE, size 0 to 4) O
GenericDigits AINPN_GenericDigits 45 to 49 0x2d to 0x31 M2
TriggerInformation AINPN_ TriggerInformation 24 0x18 O
CallingGeodeticLocation AINPN_ CallingGeodeticLocation 23 0x17 O

281
5 Non-Primitive Interface

B.15 Operation Extensions

Where permitted by the specification, the user is able to include extensions to
the normal operation definitions. These extensions can be sent and received
using the functional API. Extensions are not used by AIN.

B.15.1 Extension Format

Extension Support
Parameter Mnemonic Value
dec hex
Extensions (SEQUENCE, n = 0 to 15) O
RequestedInformationType INPN_Extension_Type(n) 560 to 0x230 to M, C
n=0 to 15 575 0x23f

RequestedInformationType INPN_Extension_Type_ObjId(n) 898 to 0x382 to M, C

n=0 to 15 913 0x391

Criticality INPN_Extension_Criticality(n) 576 to 0x240 to D

Default = ignore(0) n=0 to 15 592 0x24f

Extension_Field INPN_Extension_Field_PrimData(n) 593 to 0x250 to C,A

n=0 to 15 608 0x25f

Extension_Field INPN_Extension_Field_ ConstData (n) 609 to 0x260 to C,A

n=0 to 15 624 0x26f

When formatting or recovering extension types, integer tags are usually used.
INPN_Extension_Type_parameters should be used in those cases.
In some cases, an objectIdentifier tag may be used as an alternative to the
integer tag when formatting or recovering extension types.
INPN_Extension_Type_ObjId parameter should then be used.
Extension Support 2 is used exclusively by CAP V3 in the ApplyCharging
operation. Apart from the parameter values, the operation is the same as
Extension Support above.

Extension Support 2
Parameter Mnemonic Value
dec hex
Extensions (SEQUENCE, n = 0 to 15) O
RequestedInformationType INPN_Extension_Type2(n) 2700 to 0xa8c to M
n=0 to 15 2715 0xa9b

Criticality INPN_Extension_Criticality2(n) 2716 to 0xa9c to D

Default = ignore(0) n=0 to 15 2731 0xaab

Extension_Field INPN_Extension_Field_PrimData2(n) 2732 to 0xaac to C, A

n=0 to 15 2747 0xabb

Extension_Field INPN_Extension_Field_ ConstData2 (n) 2748 to 0xabc to C, A

n=0 to 15 2763 0xacb

282
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.15.2 Extension Recovery

If the extension criticality parameter is not present in the message on
recovery, then the default value of ignore (0) will be placed into the
INPN_Extension_Criticality(n) component parameter, where n is the number
of the extension.

B.15.3 Sending Extensions

To include a single primitive extension parameter, the extension type,
criticality and PrimData parameters should be used. The PrimData parameter
must be coded in full ASN.1 form, with an appropriately coded tag and length
included. The inclusion of the tag and length allows any valid extension tags
to be used without changes to the API. For example, a parameter of length
one with a data value {0x99} and a context specific tag 0 – the PrimData
parameter should be encoded as {0x80, 0x01, 0x99}.
To include a number of parameters inside a constructed parameter, use the
extension type, criticality and ConstData parameters. The ConstData
parameter must be in a correctly formatted ASN.1 form.

283
5 Non-Primitive Interface

B.16 Supported INAP Parameter List

B.16.1 ITU-T, ETSI, CS1+ and CAMEL parameters

The following table alphabetically lists the parameters used in the supported
operations, results, errors and rejects. These cover the ITU-T, ETSI, CS1+and
CAMEL specifications. The parameter names used for AIN operation are listed
separately in Appendix B.16.2 AIN parameters on page 305.

Parameter Value Notes

(dec)
INPN_Abandon_Ellipsis 1408 Note 3 (see page 304)
INPN_AbandonCause 860
INPN_AccessPtName 592
INPN_AccountNumber 1291
INPN_AChBillingChargingCharacteristics 52
INPN_ActionIndicator 947
INPN_ActionPerformed 948
INPN_Actions 1290
INPN_Active 636
INPN_ActiveSupplementaryServices 1282
INPN_AdditionalCallingPartyNumber 21
INPN_AgeOfLocationInformation 124
INPN_Agreements(n) 668-683 Note 2 (see page 304)
INPN_AlertingPattern 30
INPN_AllAnnouncementsComplete 4190
INPN_AllCallSeg_Ellipsis 1413 Note 3 (see page 304)
INPN_AllowCdINNoPresentInd 721
INPN_Amount 1245
INPN_AnsSpecInfo_Ellipsis 1410 Note 3 (see page 304)
INPN_AnsweredCall(n) 1228-1243 Note 2 (see page 304)
INPN_Aocrg 811
INPN_AppendFreeFormData 637
INPN_ApplicationContextString 49
INPN_ApplicationTimer(n) 176-191 Note 2 (see page 304)
INPN_AssCallSeg_Ellipsis 1412 Note 3 (see page 304)
INPN_AssistingSSPIPRoutingAddress 102
INPN_AssRelReqSpecInfo 706
INPN_AssRelReqSpecInfo_Ellipsis 1405 Note 3 (see page 304)
INPN_AssumedIdle 134

284
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter Value Notes

(dec)
INPN_AttributeCertificationPath 1301
INPN_Attributes 66
INPN_AudibleIndicTone 4214
INPN_AutomaticRearm(n) 4006-4020 Note 2 (see page 304)
INPN_BackwardGVNS 723
INPN_BackwardServIntInd_Ellipsis 1403 Note 3 (see page 304)
INPN_BCSMCause 4208
INPN_BCSMEvent_Ellipsis(n) 1335-1350 Note 2 (see page 304)
Note 3 (see page 304)
INPN_BCSMEventCorrelationID 24
INPN_BCSMEventEllipsis(n) 4021-4036 Note 2 (see page 304)
Note 3 (see page 304)
INPN_BCSMFailure_Ellipsis 946 Note 3 (see page 304)
INPN_BCUSMEvent_Ellipsis(n) 1351-1366 Note 2 (see page 304)
Note 3 (see page 304)
INPN_BearerCap_Ellipsis 119 Note 3 (see page 304)
INPN_BearerCapability 23
INPN_BearerCapability2 2771
INPN_Bits_BearerCapabilities 1286
INPN_Bits_HighLayerCompatiblities 1287
INPN_BorInterrogationRequested 2787
INPN_BothwayThroughConnectionIndicator 111
INPN_BurstEllipsis 4211 Note 3 (see page 304)
INPN_burstInterval 4194
INPN_BurstListEllipsis 4212 Note 3 (see page 304)
INPN_BusyCause 95
INPN_Bw_ConferenceTreatmentInd 710
INPN_CallActive 638
INPN_CallAttemptElapsedTimeValue(n) 293-297 Note 2 (see page 304)
INPN_CallCompletionTreatmentInd 716
INPN_CallConnectedElapsedTimeValue(n) 303-307 Note 2 (see page 304)
INPN_CallDiversionTreatmentInd 712
INPN_CallDuration(n) 1196-1211 Note 2 (see page 304)
INPN_CalledAddressValue(n) 308-312 Note 2 (see page 304)
INPN_CalledNumber(n) 1212-1227 Note 2 (see page 304)
INPN_CalledPartyBCDNumber 129
INPN_CalledPartyNumber 5

285
5 Non-Primitive Interface

Parameter Value Notes

(dec)
INPN_CalledPartyURL 4357
INPN_CallFailure(n) 1116-1131 Note 2 (see page 304)
INPN_CallForwarded 639
INPN_CallingAddressValue 99
INPN_CallingLineID 106
INPN_CallingPartyBuisnessGroupID 7
INPN_CallingPartyBusinessGroupID 7
INPN_CallingPartyNumber 6
INPN_CallingPartyNumberSMS 4188
INPN_CallingPartyRestrictionInd 714
INPN_CallingPartysCategory 8
INPN_CallingPartySubaddress 9
INPN_CallingPartyURL 4358
INPN_CallOfferingTreatmentInd 713
INPN_CallRecord_Ellipsis 1099 Note 3 (see page 304)
INPN_CallReferenceNumber 131
INPN_CallRelease(n) 1148-1163 Note 2 (see page 304)
INPN_CallReleasedAtTcpExp 640
INPN_CallResult 55
INPN_CallSegment 744
INPN_CallSegmentFailure_Ellipsis 4192 Note 3 (see page 304)
INPN_CallSegmentID 320
INPN_CallSegmentID_Array(n) 1004-1019 Note 2 (see page 304)
INPN_CallSegToCancelEllipsis 4210 Note 3 (see page 304)
INPN_CallStopTimeValue(n) 298-302 Note 2 (see page 304)
INPN_CAMEL_AOC_AfterAnswer 4220 Note 4 (see page 304)
INPN_CAMEL_AOC_BeforeAnswer 143
INPN_CamelBusy 135
INPN_Cancel_InvokeID 86
INPN_CancelAllRequests 4219
INPN_CancelDigit 77
INPN_CancelDigitSeq(n) 2837-2852 Note 2 (see page 304)
INPN_CancelFailed_Operation 43
INPN_CancelFailed_Problem 42
INPN_Carrier 40
INPN_Cause 41

286
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter Value Notes

(dec)
INPN_CauseOfLastCallFailure 1283
INPN_CellGlobalId0(n) 2885-2900 Note 2 (see page 304)
INPN_CellGlobalId1(n) 2997-3012 Note 2 (see page 304)
INPN_CellGlobalId2(n) 3109-3124 Note 2 (see page 304)
INPN_CellGlobalId3(n) 3221-3236 Note 2 (see page 304)
INPN_CellGlobalId4(n) 3333-3348 Note 2 (see page 304)
INPN_CellGlobalId5(n) 3445-3460 Note 2 (see page 304)
INPN_CellGlobalId6(n) 3557-3572 Note 2 (see page 304)
INPN_CellGlobalId7(n) 3669-3684 Note 2 (see page 304)
INPN_CellGlobalId8(n) 3781-3796 Note 2 (see page 304)
INPN_CellGlobalId9(n) 3893-3908 Note 2 (see page 304)
INPN_CellIdFixedLength 122
INPN_CertificationPath 1294
INPN_cGEncountered 10
INPN_CGlobal_SArea_LAI 641
INPN_ChangeOfLocationEllipsis0(n) 2981-2996 Note 2 (see page 304)
Note 3 (see page 304)
INPN_ChangeOfLocationEllipsis1(n) 3093-3108 Note 2 (see page 304)
Note 3 (see page 304)
INPN_ChangeOfLocationEllipsis2(n) 3205-3220 Note 2 (see page 304)
Note 3 (see page 304)
INPN_ChangeOfLocationEllipsis3(n) 3317-3332 Note 2 (see page 304)
Note 3 (see page 304)
INPN_ChangeOfLocationEllipsis4(n) 3429-3444 Note 2 (see page 304)
Note 3 (see page 304)
INPN_ChangeOfLocationEllipsis5(n) 3541-3556 Note 2 (see page 304)
Note 3 (see page 304)
INPN_ChangeOfLocationEllipsis6(n) 3653-3668 Note 2 (see page 304)
Note 3 (see page 304)
INPN_ChangeOfLocationEllipsis7(n) 3765-3780 Note 2 (see page 304)
Note 3 (see page 304)
INPN_ChangeOfLocationEllipsis8(n) 3877-3892 Note 2 (see page 304)
Note 3 (see page 304)
INPN_ChangeOfLocationEllipsis9(n) 3989-4004 Note 2 (see page 304)
Note 3 (see page 304)
INPN_ChargeIndicator 4182
INPN_ChargeNumber 642
INPN_ChargingEvent_Ellipsis(n) 1303-1318 Note 2 (see page 304)
Note 3 (see page 304)

287
5 Non-Primitive Interface

Parameter Value Notes

(dec)
INPN_ChargingID 643
INPN_ChargingParameters_Ellipsis 1254 Note 3 (see page 304)
INPN_ChargingTariffInformation 932
INPN_CldAddrServ_Ellipsis 1398 Note 3 (see page 304)
INPN_ClgAddrServ_Ellipsis 1400 Note 3 (see page 304)
INPN_CollectedInfo_Ellipsis 4221 Note 3 (see page 304)
INPN_collectInformationAllowed 2785
INPN_ComCalledAddressValue 894
INPN_CompRecSpecInfo 705
INPN_ComServiceKey 893
INPN_ConnectedNumberTreatment 718
INPN_ConnectTime 103
INPN_ContinueWithArgumentExtensionEllipsis 4209 Note 3 (see page 304)
INPN_ControlDigits_Ellipsis 558 Note 3 (see page 304)
INPN_ControlType 101
INPN_CorrelationID 31
INPN_CounterID(n) 328-427 Note 2 (see page 304)
INPN_CounterValue(n) 428-527 Note 2 (see page 304)
INPN_CreditLimitReached(n) 1180-1195 Note 2 (see page 304)
INPN_CreditUnit 1368
INPN_Crgt 810
INPN_CS1P_AnnouncementStarted 4426
INPN_CS1P_ApplicationId 4436
INPN_CS1P_BackwardCallIndicators 4396
INPN_CS1P_BackwardGvnsIndicator 4397
INPN_CS1P_BearerCapability 4382
INPN_CS1P_BothwayThroughConInd 4428
INPN_CS1P_Bw_CallTransferTreatmentInd 4405
INPN_CS1P_Bw_ServIntInd_Ellipsis 4407 Note 3 (see page 304)
INPN_CS1P_CallingPartysCategory 4409
INPN_CS1P_Cause 4415
INPN_CS1P_CollectedDigits_Ellipsis 4430 Note 3 (see page 304)
INPN_CS1P_ConnectedNumTreatInd 4427
INPN_CS1P_ConServIntInd_Ellipsis 4433 Note 3 (see page 304)
INPN_CS1P_CUGCallIndicator 4384
INPN_CS1P_CUGInterlockCode 4385

288
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter Value Notes

(dec)
INPN_CS1P_DataItemId 4437
INPN_CS1P_DataItemInfo 4438
INPN_CS1P_EtcServIntInd_Ellipsis 4434 Note 3 (see page 304)
INPN_CS1P_ForwardCallIndicators 4386
INPN_CS1P_Fw_CallTransferTreatmentInd 4404
INPN_CS1P_Fw_ServIntInd_Ellipsis 4406 Note 3 (see page 304)
INPN_CS1P_FwdGvnsInd_Ellipsis 4393 Note 3 (see page 304)
INPN_CS1P_GenericDigitsSet 4387
INPN_CS1P_GenericNumberSet 4388
INPN_CS1P_GvnsUserGroupId 4391
INPN_CS1P_HandOverCounter 4416
INPN_CS1P_HandOverData 4418
INPN_CS1P_HandOverInfo_Ellipsis 4425 Note 3 (see page 304)
INPN_CS1P_HandOverNumber 4417
INPN_CS1P_HighLayerCompatibility 4389
INPN_CS1P_IcaServIntInd_Ellipsis 4432 Note 3 (see page 304)
INPN_CS1P_IdpServIntInd_Ellipsis 4431 Note 3 (see page 304)
INPN_CS1P_ImproperCallerResponse 4440
INPN_CS1P_LegIDs 4412
INPN_CS1P_MessageId 4402
INPN_CS1P_MidCallEventsInfo 4399
INPN_CS1P_NotReachableCause 4395
INPN_CS1P_OperationId 4435
INPN_CS1P_OperationReturnId 4439
INPN_CS1P_OpspIdentification 4390
INPN_CS1P_OriginalCalledPartyID 4408
INPN_CS1P_ReceivingScpAddress 4422
INPN_CS1P_ReceivingScpCorrInfo 4424
INPN_CS1P_ReceivingScpDlgInfo 4423
INPN_CS1P_ReceivingSideID 4381
INPN_CS1P_RedirectingPartyID 4410
INPN_CS1P_RedirectionInformation 4411
INPN_CS1P_RequestAnnouncementComplete 4401
INPN_CS1P_RequestAnnouncementStarted 4400
INPN_CS1P_RouteIndex 4394
INPN_CS1P_RouteOrigin 4413

289
5 Non-Primitive Interface

Parameter Value Notes

(dec)
INPN_CS1P_SendingScpAddress 4419
INPN_CS1P_SendingScpCorrInfo 4421
INPN_CS1P_SendingScpDlgInfo 4420
INPN_CS1P_SendingSideID 4380
INPN_CS1P_TestIndication 4414
INPN_CS1P_TextId 4429
INPN_CS1P_TimeToAnswer 4398
INPN_CS1P_Tmr 4383
INPN_CS1P_TnrNumber 4392
INPN_CS1P_Total_ElapsedTimeout 4403
INPN_CSAID 725
INPN_CSFailure_Ellipsis 945 Note 3 (see page 304)
INPN_CUG_Index 644
INPN_CUG_Interlock 645
INPN_CUG_OutgoingAccess 646
INPN_CurLocRetrieved 4228
INPN_CurrencyID 1244
INPN_CurrencyValue_Ellipsis 1246 Note 3 (see page 304)
INPN_CutAndPaste 32
INPN_CWTreatmentInd 647
INPN_Date(n) 543-547 Note 2 (see page 304)
INPN_DestinationAddr 648
INPN_DestinationRoutingAddress(n) 27-29 Note 2 (see page 304)
INPN_DestinationRoutingAddressURL 4354
INPN_DestSubscriberNumber 649
INPN_DialledDigits 4
INPN_DialledNumber 105
INPN_DigitsResponse 47
INPN_DisconnectFromIPForbidden 59
INPN_DiscSpecInfo_Ellipsis 1409 Note 3 (see page 304)
INPN_DisplayInformation 91
INPN_DistinguishedName 1295
INPN_DPAssignment 14
INPN_DPSpecCrit_Ellipsis(n) 4364-4379 Note 2 (see page 304)
INPN_DpSpecCritAltEllipsis(n) 4233-4248 Note 2 (see page 304)
Note 3 (see page 304)

290
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter Value Notes

(dec)
INPN_DTMFDigitsCompleted 4183
INPN_DTMFDigitsTimeOut 4184
INPN_Duration 89
INPN_ECTTreatmentInd 709
INPN_ElementaryMessageID 628
INPN_ElementaryMessageIDs(n) 256-271 Note 2 (see page 304)
INPN_Ellipsis 112 Note 3 (see page 304)
INPN_EndOfRecordingDigit 553
INPN_EndOfReplyDigit 76
INPN_EndOfReplyDigitSeq(n) 2821-2836 Note 2 (see page 304)
INPN_EnhancedDialledServicesAllowed 2784
INPN_EnteringCellGlobalId(n) 4053-4062 Note 2 (see page 304)
INPN_EnteringLocationAreaId(n) 4093-4102 Note 2 (see page 304)
INPN_EnteringServiceAreaId(n) 4073-4082 Note 2 (see page 304)
INPN_EntityReleased_Cause 944
INPN_EntityReleased_Reason 943
INPN_Error_Attributes 1256
INPN_Error_Date(n) 1083-1087 Note 2 (see page 304)
INPN_Error_DisplayInformation 1096
INPN_Error_Duration 1094
INPN_Error_ElementaryMessageID 1258
INPN_Error_ElementaryMessageIDs(n) 1052-1067 Note 2 (see page 304)
INPN_Error_InfoToSend_Ellipsis 635 Note 3 (see page 304)
INPN_Error_Integer(n) 1068-1072 Note 2 (see page 304)
INPN_Error_Interval 1095
INPN_Error_MessageContent 1255
INPN_Error_Number(n) 1073-1077 Note 2 (see page 304)
INPN_Error_NumberOfRepetitions 1093
INPN_Error_Price(n) 1088-1092 Note 2 (see page 304)
INPN_Error_Time(n) 1078-1082 Note 2 (see page 304)
INPN_Error_ToneID 1259
INPN_Error_Variable_MessageID 1257
INPN_ErrorProtection 1302
INPN_Errortreatment 81
INPN_EventSpecificInformationBCUSM 727
INPN_EventSpecificInformationCharging 58

291
5 Non-Primitive Interface

Parameter Value Notes

(dec)
INPN_EventSpecificInformationTariff 707
INPN_EventSpecInfo_Ellipsis 113 Note 3 (see page 304)
INPN_EventSpecInfoGPRS_Ellipsis 1372 Note 3 (see page 304)
INPN_EventSpecInfoSMS_Ellipsis 1371 Note 3 (see page 304)
INPN_EventTypeBCSM(n) 192-207 Note 2 (see page 304)
INPN_EventTypeBCUSM(n) 728-743 Note 2 (see page 304)
INPN_EventTypeCharging(n) 272-287 Note 2 (see page 304)
INPN_EventTypeSMS(n) 861-876 Note 2 (see page 304)
INPN_EventTypeTariff(n) 794-809 Note 2 (see page 304)
INPN_Ext_BearerServiceCode 120
INPN_Ext_BearerServiceCode_tServChng 4180
INPN_Ext_BearerServiceCode2 2764
INPN_Ext_TeleserviceCode 121
INPN_Ext_TeleserviceCode_tServChng 4181
INPN_Ext_TeleserviceCode2 2765
INPN_Extension_Criticality(n) 576-591 Note 2 (see page 304)
INPN_Extension_Criticality2(n) 2716-2731 Note 2 (see page 304)
INPN_Extension_Field_ConstData(n) 609-624 Note 2 (see page 304)
INPN_Extension_Field_ConstData2(n) 2748-2763 Note 2 (see page 304)
INPN_Extension_Field_PrimData(n) 593-608 Note 2 (see page 304)
INPN_Extension_Field_PrimData2(n) 2732-2747 Note 2 (see page 304)
INPN_Extension_Type(n) 560-575 Note 2 (see page 304)
INPN_Extension_Type_ObjId(n) 898-913 Note 2 (see page 304)
INPN_Extension_Type2(n) 2700-2715 Note 2 (see page 304)
INPN_ExtensionContainer 128
INPN_FailureCause 94
INPN_FCIBCC 708
INPN_FCIBCC_Ellipsis 4217 Note 3 (see page 304)
INPN_FCIBCCS 700
INPN_FCIBCCS1 715
INPN_FCIBCCSeq_Ellipsis 1399 Note 3 (see page 304)
INPN_FCIBillingChargingCharacteristics 54
INPN_FCIGPRSseq_Ellipsis 1367 Note 3 (see page 304)
INPN_Filtering_Duration 98
INPN_FirstAnnouncementStarted 4191
INPN_FirstDigitTimeOut 79

292
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter Value Notes

(dec)
INPN_ForwardCallIndicators 22
INPN_ForwardedCall 651
INPN_ForwardGVNS 724
INPN_ForwardingCondition 33
INPN_forwardingDestinationNumber 4185
INPN_ForwardingDestNumber 2776
INPN_ForwardServIntInd_Ellipsis 1402 Note 3 (see page 304)
INPN_FreeFormData 319
INPN_Fw_ConferenceTreatmentInd 711
INPN_Gap_Duration 72
INPN_GapInd_Ellipsis 1411 Note 3 (see page 304)
INPN_GapInterval 73
INPN_GapOnServ_Ellipsis 1401 Note 3 (see page 304)
INPN_GenericName 934
INPN_GenericNumber(n) 67-71 Note 2 (see page 304)
INPN_GeodeticInformation 4229
INPN_GeographicalInformation 125
INPN_GGSNAddress 652
INPN_Global(n) 828-843 Note 2 (see page 304)
INPN_GMSCAddress 653
INPN_GPRSCause 654
INPN_GPRSChargingID 655
INPN_GPRSEventType(n) 877-892 Note 2 (see page 304)
INPN_GPRSExtensionContainer 896
INPN_GPRSGeographicalInformation 895
INPN_GPRSRoutingAreaID 897
INPN_GSM_ForwardingPending 133
INPN_GsmSCFAddress 4186
INPN_HighLayerCompatibility 19
INPN_HighLayerCompatibility2 2781
INPN_HoldTreatmentInd 656
INPN_HuntGroup 953
INPN_IA5Information 955
INPN_IA5Response 48
INPN_IA5String(n) 1261-1276 Note 2 (see page 304)
INPN_IMEI 2778

293
5 Non-Primitive Interface

Parameter Value Notes

(dec)
INPN_IMSI 130
INPN_IMSSFAddress 4355
INPN_InbandInfo_Ellipsis 1383 Note 3 (see page 304)
INPN_Include_NA_Info 138
INPN_InfoToRecord_Ellipsis 559 Note 3 (see page 304)
INPN_InfoToSend_Ellipsis 634 Note 3 (see page 304)
INPN_Initial_CAI_E1 144
INPN_Initial_CAI_E2 145
INPN_Initial_CAI_E3 146
INPN_Initial_CAI_E4 147
INPN_Initial_CAI_E5 148
INPN_Initial_CAI_E6 149
INPN_Initial_CAI_E7 150
INPN_InitialCallSegment 745
INPN_InitialDPArgExt_Ellipsis 117 Note 3 (see page 304)
INPN_InitialTimeInterval 1253
INPN_InitialUnitIncrement 1250
INPN_InitiateIntegrity 657
INPN_InitiatingEntity 942
INPN_INServiceControlCode 701
INPN_INServiceControlCodeHigh0(n) 1464-1479 Note 2 (see page 304)
INPN_INServiceControlCodeHigh1(n) 1544-1559 Note 2 (see page 304)
INPN_INServiceControlCodeHigh2(n) 1624-1639 Note 2 (see page 304)
INPN_INServiceControlCodeHigh3(n) 1704-1719 Note 2 (see page 304)
INPN_INServiceControlCodeLow0(n) 1448-1463 Note 2 (see page 304)
INPN_INServiceControlCodeLow1(n) 1528-1543 Note 2 (see page 304)
INPN_INServiceControlCodeLow2(n) 1608-1623 Note 2 (see page 304)
INPN_INServiceControlCodeLow3(n) 1688-1703 Note 2 (see page 304)
INPN_Integer(n) 528-532 Note 2 (see page 304)
INPN_InterDigitTimeOut 80
INPN_InterDigitTimeout(n) 2869-2884 Note 2 (see page 304)
INPN_InterMSCHandOver(n) 4143-4152 Note 2 (see page 304)
INPN_InterMSCHandOver0(n) 2965-2980 Note 2 (see page 304)
INPN_InterMSCHandOver1(n) 3077-3092 Note 2 (see page 304)
INPN_InterMSCHandOver2(n) 3189-3204 Note 2 (see page 304)
INPN_InterMSCHandOver3(n) 3301-3316 Note 2 (see page 304)

294
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter Value Notes

(dec)
INPN_InterMSCHandOver4(n) 3413-3428 Note 2 (see page 304)
INPN_InterMSCHandOver5(n) 3525-3540 Note 2 (see page 304)
INPN_InterMSCHandOver6(n) 3637-3652 Note 2 (see page 304)
INPN_InterMSCHandOver7(n) 3749-3764 Note 2 (see page 304)
INPN_InterMSCHandOver8(n) 3861-3876 Note 2 (see page 304)
INPN_InterMSCHandOver9(n) 3973-3988 Note 2 (see page 304)
INPN_InterPLMNHandOver(n) 4133-4142 Note 2 (see page 304)
INPN_InterPLMNHandOver0(n) 2949-2964 Note 2 (see page 304)
INPN_InterPLMNHandOver1(n) 3061-3076 Note 2 (see page 304)
INPN_InterPLMNHandOver2(n) 3173-3188 Note 2 (see page 304)
INPN_InterPLMNHandOver3(n) 3285-3300 Note 2 (see page 304)
INPN_InterPLMNHandOver4(n) 3397-3412 Note 2 (see page 304)
INPN_InterPLMNHandOver5(n) 3509-3524 Note 2 (see page 304)
INPN_InterPLMNHandOver6(n) 3621-3636 Note 2 (see page 304)
INPN_InterPLMNHandOver7(n) 3733-3748 Note 2 (see page 304)
INPN_InterPLMNHandOver8(n) 3845-3860 Note 2 (see page 304)
INPN_InterPLMNHandOver9(n) 3957-3972 Note 2 (see page 304)
INPN_InterruptableAnnInd 82
INPN_InterSystemHandOver0(n) 2933-2948 Note 2 (see page 304)
INPN_InterSystemHandOver1(n) 3045-3060 Note 2 (see page 304)
INPN_InterSystemHandOver2(n) 3157-3172 Note 2 (see page 304)
INPN_InterSystemHandOver3(n) 3269-3284 Note 2 (see page 304)
INPN_InterSystemHandOver4(n) 3381-3396 Note 2 (see page 304)
INPN_InterSystemHandOver5(n) 3493-3508 Note 2 (see page 304)
INPN_InterSystemHandOver6(n) 3605-3620 Note 2 (see page 304)
INPN_InterSystemHandOver7(n) 3717-3732 Note 2 (see page 304)
INPN_InterSystemHandOver8(n) 3829-3844 Note 2 (see page 304)
INPN_InterSystemHandOver9(n) 3941-3956 Note 2 (see page 304)
INPN_InterSystemHandOverToGSM(n) 4123-4132 Note 2 (see page 304)
INPN_InterSystemHandOverToUMTS(n) 4113-4122 Note 2 (see page 304)
INPN_Interval 90
INPN_InvokableService 1293
INPN_InvokedSupplementaryService 1281
INPN_InvokeID 1
INPN_IPAddrCallSeg_Ellipsis 1415 Note 3 (see page 304)
INPN_IPAddrLegID_Ellipsis 1414 Note 3 (see page 304)

295
5 Non-Primitive Interface

Parameter Value Notes

(dec)
INPN_IPAvailable 12
INPN_IPRoutingAddress 85
INPN_IPSSPCapabilities 11
INPN_ISDNAccessRelatedInformation 34
INPN_ISDNAddressString 726
INPN_LAIFixedLength 123
INPN_LastEventIndicator 627
INPN_LeavingCellGlobalId(n) 4063-4072 Note 2 (see page 304)
INPN_LeavingLocationAreaId(n) 4103-4112 Note 2 (see page 304)
INPN_LeavingServiceAreaId(n) 4083-4092 Note 2 (see page 304)
INPN_LegActive 4215
INPN_LI_LocationNumber 127
INPN_Linked_Op_Code 57
INPN_LinkedID 2
INPN_Local(n) 844-859 Note 2 (see page 304)
INPN_LocalValue 702
INPN_LocationAreaId0(n) 2917-2932 Note 2 (see page 304)
INPN_LocationAreaId1(n) 3029-3044 Note 2 (see page 304)
INPN_LocationAreaId2(n) 3141-3156 Note 2 (see page 304)
INPN_LocationAreaId3(n) 3253-3268 Note 2 (see page 304)
INPN_LocationAreaId4(n) 3365-3380 Note 2 (see page 304)
INPN_LocationAreaId5(n) 3477-3492 Note 2 (see page 304)
INPN_LocationAreaId6(n) 3589-3604 Note 2 (see page 304)
INPN_LocationAreaId7(n) 3701-3716 Note 2 (see page 304)
INPN_LocationAreaId8(n) 3813-3828 Note 2 (see page 304)
INPN_LocationAreaId9(n) 3925-3940 Note 2 (see page 304)
INPN_LocationInfo_Ellipsis 114 Note 3 (see page 304)
INPN_LocationInfoGPRS_Ellipsis 1369 Note 3 (see page 304)
INPN_LocationInfoGPRS_SAIPresent 4232
INPN_LocationInfoGPRS_SelLSAIdentity 4281
INPN_LocationInfoGPRS_SGSNNumber 4231
INPN_LocationNumber 13
INPN_LowLayerCompatibility 2782
INPN_LowLayerCompatibility2 2783
INPN_MailBoxID 322
INPN_MaxCallPeriodDuration 159

296
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter Value Notes

(dec)
INPN_MaxElapsedTime 658
INPN_MaximumNumberOfCounters 93
INPN_MaximumNumberOfDigits 75
INPN_MaximumNumberOfDigitsSeq(n) 2805-2820 Note 2 (see page 304)
INPN_MaxTransferredVol 659
INPN_MC_InterDigitTimeout(n) 4265-4280 Note 2 (see page 304)
INPN_Media 323
INPN_MediaTypeInfo(n) 4359-4363 Note 2 (see page 304)
INPN_MessageContent 65
INPN_MessageDeletionTimeOut 625
INPN_MessageType 56
INPN_MetDPCriterion_Ellipsis(n) 4153-4162 Note 2 (see page 304)
Note 3 (see page 304)
INPN_MidCallCtlInfoEllipsis(n) 4249-4264 Note 2 (see page 304)
Note 3 (see page 304)
INPN_MidCallCtrlSeq0_Ellipsis(n) 1432-1447 Note 2 (see page 304)
Note 3 (see page 304)
INPN_MidCallCtrlSeq1_Ellipsis(n) 1512-1527 Note 2 (see page 304)
Note 3 (see page 304)
INPN_MidCallCtrlSeq2_Ellipsis(n) 1592-1607 Note 2 (see page 304)
Note 3 (see page 304)
INPN_MidCallCtrlSeq3_Ellipsis(n) 1672-1687 Note 2 (see page 304)
Note 3 (see page 304)
INPN_MidCallInfo_Ellipsis 1406 Note 3 (see page 304)
INPN_MidCallInfoType0_Ellipsis(n) 1416-1431 Note 2 (see page 304)
Note 3 (see page 304)
INPN_MidCallInfoType1_Ellipsis(n) 1496-1511 Note 2 (see page 304)
Note 3 (see page 304)
INPN_MidCallInfoType2_Ellipsis(n) 1576-1591 Note 2 (see page 304)
Note 3 (see page 304)
INPN_MidCallInfoType3_Ellipsis(n) 1656-1671 Note 2 (see page 304)
Note 3 (see page 304)
INPN_MidCallReportType0(n) 1480-1495 Note 2 (see page 304)
INPN_MidCallReportType1(n) 1560-1575 Note 2 (see page 304)
INPN_MidCallReportType2(n) 1640-1655 Note 2 (see page 304)
INPN_MidCallReportType3(n) 1720-1735 Note 2 (see page 304)
INPN_MidCallSpecInfo_Ellipsis 1407 Note 3 (see page 304)
INPN_MinimumNumberOfDigits 74

297
5 Non-Primitive Interface

Parameter Value Notes

(dec)
INPN_MinimumNumberOfDigitsSeq(n) 2789-2804 Note 2 (see page 304)
INPN_MiscCall_Ellipsis 1381 Note 3 (see page 304)
INPN_MonitorMode(n) 208-223 Note 2 (see page 304)
INPN_MSCAddress 132
INPN_MSClassMark2 2777
INPN_MSISDN 660
INPN_MSNetworkCapability 661
INPN_MSRadioAccessCapability 662
INPN_MT_SMSCause 2772
INPN_NACarrierID 140
INPN_NACarrierInfo_Ellipsis 116 Note 3 (see page 304)
INPN_NAChargeNumber 142
INPN_NACICSelectionType 139
INPN_NAInfo_Ellipsis 115 Note 3 (see page 304)
INPN_NAOliInfo 141
INPN_NegGPRSQoSExt_Ellipsis 4207 Note 3 (see page 304)
INPN_NegLngQoSFormat 747
INPN_NegShtQoSFormat 746
INPN_NegSupToLongQoSFormat 4206
INPN_NetDetNotReachable 136
INPN_NetworkSpecific(n) 684-699 Note 2 (see page 304)
INPN_NewCallSegment(n) 1036-1051 Note 2 (see page 304)
INPN_NewCallSegmentAssociation 935
INPN_NewLeg(n) 988-1003 Note 2 (see page 304)
INPN_NonCUGCall 663
INPN_None 650
INPN_NoReply(n) 1132-1147 Note 2 (see page 304)
INPN_Notification 1288
INPN_NotProvidedFromVLR 137
INPN_Null 0
INPN_Number(n) 533-537 Note 2 (see page 304)
INPN_NumberingPlan 107
INPN_NumberOfAllowedRetries 1097
INPN_numberOfBursts 4193
INPN_NumberOfCallAttempts 1280
INPN_NumberOfCalls 97

298
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter Value Notes

(dec)
INPN_NumberOfDigits(n) 160-175 Note 2 (see page 304)
INPN_NumberOfRepetitions 88
INPN_numberOfTonesInBurst 4195
INPN_OCSIApplicable 110
INPN_OfferedCamel4Functionalities 2780
INPN_oInitiatorOfServiceCharge 4224
INPN_oNatureOfServiceCharge 4226
INPN_OperationCode 1300
INPN_OrCall 664
INPN_OriginalCalledPartyID 15
INPN_OriginalCalledPartyURL 4353
INPN_oServiceChargeInfo_Ellipsis 4222 Note 3 (see page 304)
INPN_PDPAddress 666
INPN_PDPID 665
INPN_PDPInitiationType 667
INPN_PDPTypeNumber 748
INPN_PDPTypeOrganization 749
INPN_PreferredLanguage 1285
INPN_Price(n) 548-552 Note 2 (see page 304)
INPN_PrivateFacilityID 952
INPN_problem_code 51
INPN_provider_error 50
INPN_QoS_Ellipsis 1370 Note 3 (see page 304)
INPN_Random 1297
INPN_ReceivedStatus 631
INPN_ReceivingSideID(n) 240-255 Note 2 (see page 304)
INPN_Record_MessageID 630
INPN_RecordedMessageID 632
INPN_RecordedMessageUnits 633
INPN_RedirectingPartyID 25
INPN_RedirectingPartyURL 4352
INPN_RedirectionInformation 26
INPN_RegistratorIdentifier 949
INPN_ReleaseCause 96
INPN_ReleaseCauseValue(n) 313-317 Note 2 (see page 304)
INPN_ReleaseIfDurExceeded 750

299
5 Non-Primitive Interface

Parameter Value Notes

(dec)
INPN_RelIfDurEx_Ellipsis 4179 Note 3 (see page 304)
INPN_RelIfDurExc_Ellipsis 118 Note 3 (see page 304)
INPN_RelIfDurExc_Tone 318
INPN_ReplayAllowed 557
INPN_ReplayDigit 554
INPN_ReportExpected 1278
INPN_ReqGPRSQoSExt_Ellipsis 4203 Note 3 (see page 304)
INPN_ReqInfo_Ellipsis(n) 1376-1380 Note 2 (see page 304)
Note 3 (see page 304)
INPN_ReqLngQoSFormat 752
INPN_ReqShtQoSFormat 751
INPN_ReqSupToLongQoSFormat 4202
INPN_RequestAnnouncementComplete 60
INPN_RequestAnnouncementStarted 4189
INPN_RequestedInfoError 44
INPN_RequestedInformationType(n) 288-292 Note 2 (see page 304)
INPN_RequestedType 1279
INPN_RequestedUTSI_Ellipsis(n) 1319-1334 Note 2 (see page 304)
Note 3 (see page 304)
INPN_Response 1299
INPN_ResponseCondition 108
INPN_RestartAllowed 556
INPN_RestartRecordingDigit 555
INPN_RO_TmGPRSLastTariffSwch 757
INPN_RO_TmGPRSNoTariffSwch 756
INPN_RO_TmGPRSTariffSwchInt 758
INPN_RO_VolIfNoTariffSwch 761
INPN_RO_VolLastTariffSwch 759
INPN_RO_VolTariffSwchInt 760
INPN_RouteIndex 954
INPN_RouteList(n) 35-37 Note 2 (see page 304)
INPN_RouteNotPermitted 753
INPN_RoutingAreaID 754
INPN_RoutingAreaUpdate 755
INPN_RoutingProhibited 1260
INPN_RPCause 762
INPN_SAIPresent 763

300
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter Value Notes

(dec)
INPN_ScalingFactor 1249
INPN_ScfID 38
INPN_SCIBCCAlt_Ellipsis 4218 Note 3 (see page 304)
INPN_SCIBillingChargingCharacteristics 87
INPN_SCIGPRSBC_Ellipsis 4201 Note 3 (see page 304)
INPN_ScriptId_Global 325
INPN_ScriptId_Local 324
INPN_ScriptResult 327
INPN_ScriptSpecificInfo 326
INPN_SecondaryPDPContext 764
INPN_SegmentsPerDataInterval 1252
INPN_SelectLSAIdentity 765
INPN_SendCalculationToSCPIndication 53
INPN_SendingSideID(n) 224-239 Note 2 (see page 304)
INPN_ServiceAreaId0(n) 2901-2916 Note 2 (see page 304)
INPN_ServiceAreaId1(n) 3013-3028 Note 2 (see page 304)
INPN_ServiceAreaId2(n) 3125-3140 Note 2 (see page 304)
INPN_ServiceAreaId3(n) 3237-3252 Note 2 (see page 304)
INPN_ServiceAreaId4(n) 3349-3364 Note 2 (see page 304)
INPN_ServiceAreaId5(n) 3461-3476 Note 2 (see page 304)
INPN_ServiceAreaId6(n) 3573-3588 Note 2 (see page 304)
INPN_ServiceAreaId7(n) 3685-3700 Note 2 (see page 304)
INPN_ServiceAreaId8(n) 3797-3812 Note 2 (see page 304)
INPN_ServiceAreaId9(n) 3909-3924 Note 2 (see page 304)
INPN_ServiceInteractionIndicators 20
INPN_ServiceKey 3
INPN_ServiceProfileIdentifier 16
INPN_ServIntActInd2_Ellipsis 1404 Note 3 (see page 304)
INPN_SFBillingChargingCharacteristics 92
INPN_SFTarrifMessage_Ellipsis 933 Note 3 (see page 304)
INPN_SGSNCapabilities 766
INPN_SGSNNumber 767
INPN_SipCallId 4356
INPN_SMSCAddress 768
INPN_SMSCause 769
INPN_SMSReferenceNumber 770

301
5 Non-Primitive Interface

Parameter Value Notes

(dec)
INPN_SourceCallSegment(n) 1020-1035 Note 2 (see page 304)
INPN_SourceLeg(n) 972-987 Note 2 (see page 304)
INPN_SrfConnection 2786
INPN_SS_Invocation(n) 1164-1179 Note 2 (see page 304)
INPN_StartDigit 78
INPN_StartDigitSeq(n) 2853-2868 Note 2 (see page 304)
INPN_StartTime 63
INPN_StopTime 100
INPN_SubGPRSQoSExt_Ellipsis 4205 Note 3 (see page 304)
INPN_SubLngQoSFormat 772
INPN_SubscriberID 321
INPN_Subsequent_CAI_E1 151
INPN_Subsequent_CAI_E2 152
INPN_Subsequent_CAI_E3 153
INPN_Subsequent_CAI_E4 154
INPN_Subsequent_CAI_E5 155
INPN_Subsequent_CAI_E6 156
INPN_Subsequent_CAI_E7 157
INPN_SubShtQoSFormat 771
INPN_SubSupToLongQoSFormat 4204
INPN_SupplimentaryServices 1277
INPN_SupportedCamelPhases 2779
INPN_SuppressCallDiverNot 719
INPN_SuppressCallTransferNot 720
INPN_SuppressDCSI 4198
INPN_SuppressionOfAnnouncement 109
INPN_SuppressNCSI 2788
INPN_SuppressOCSI 4200
INPN_SuppressOutgoingCallBarring 4199
INPN_SuppressTCSI 4187
INPN_SuspendTimer 717
INPN_SystemFailure 45
INPN_Target 1298
INPN_TargetCallSegment 936
INPN_TargetCallSegmentAssociation 937
INPN_TariffMessage 956

302
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter Value Notes

(dec)
INPN_TariffSwitchInterval 158
INPN_TaskRefused 46
INPN_TerminalType 17
INPN_Time(n) 538-541 Note 2 (see page 304)
INPN_TimeAndTimezone 703
INPN_TimePerInterval 1248
INPN_TimerID 61
INPN_TimerValue 62
INPN_TimeStamp 1292
INPN_TimeToRecord 626
INPN_tInitiatorOfServiceCharge 4225
INPN_TmDurChar_Ellipsis 1374 Note 3 (see page 304)
INPN_TmDurCharRes_Ellipsis 1373 Note 3 (see page 304)
INPN_TmGPRSNoTariffSwch 773
INPN_TmGPRSSinceLastTariffSwch 774
INPN_TmGPRSTariffSwchInt 775
INPN_TmIfNoTariffSwch 776
INPN_Tmr 104
INPN_TmSinceTariffSwch 777
INPN_tNatureOfServiceCharge 4227
INPN_Tone 778
INPN_Tone_Ellipsis 1375 Note 3 (see page 304)
INPN_toneDuration 4196
INPN_ToneID 64
INPN_toneInterval 4197
INPN_TPDataCodingScheme 779
INPN_TPProtocolID 780
INPN_TPShtMsgSubInfo 781
INPN_TPValidityPeriod 782
INPN_TravellingClassMark 39
INPN_TriggerDataId_Ellipsis 950 Note 3 (see page 304)
INPN_TriggerType 18
INPN_TrunkGroupID 951
INPN_tServiceChargeInfo_Ellipsis 4223 Note 3 (see page 304)
INPN_TypeOfRequestedInfo 1098
INPN_UniqueCallID 1289

303
5 Non-Primitive Interface

Parameter Value Notes

(dec)
INPN_UnitsPerDataInterval 1251
INPN_UnitsPerInterval 1247
INPN_UserAbandon(n) 1100-1115 Note 2 (see page 304)
INPN_UserDialogueDuratInd 722
INPN_UserInteractionModes 1284
INPN_USIInformation 704
INPN_USIMonitorMode(n) 812-827 Note 2 (see page 304)
INPN_UTCTime 1296
INPN_UU_Ellipsis 4216 Note 3 (see page 304)
INPN_UU_ExtensionContainer 4230
INPN_UUI 2774
INPN_UUIndicator 2773
INPN_uusCFInteraction 2775
INPN_Variable_MessageID 629
INPN_Vlr_Number 126
INPN_VoiceBack 84
INPN_VoiceInformation 83
INPN_VolIfNoTariffSwch 785
INPN_VolLastTariffSwch 783
INPN_VolTariffSwchInt 784
INPN_warningPeriod 4213

Note 1: Parameter is a sequence of a primitive type.

Note 2: Parameter is a primitive inside a sequence of a constructed type in at
least one operation.
Note 3: Where an operation defines a sequence as ending with an ellipsis
element, additional parameters may be included at the end of the sequence.
The data from these additional parameters is stored in a single parameter;
for example, INPN_Ellipsis. As the format and encoding of these parameters
is inherently undefined in the specification, the entire parameter—including
tag, length and data—is stored in the parameter as it appears in the message
buffer. This allows the user to recover the largest range of additional
parameter data without requiring custom changes to the API library. If more
than one parameter is present in the ellipsis, the parameters are
concatenated together in the order they appear in the message and stored in
the same ellipsis parameter.
Note 4: INPN_CAMEL_AOC_AfterAnswer will not be formatted or decoded, it
is used to determine if the AOC is after the answer for CAMEL v4. If present
AOCAfterAnswer will be sent, otherwise AOCBeforeAnswer or the AOC-
Extension will be sent. Used in conjunction with
INPN_CAMEL_AOC_BeforeAnswer parameter.
304
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.16.2 AIN parameters

The following table alphabetically lists the parameters used in the supported
operations, results, errors and rejects. These cover the AIN specifications.
The parameter names used for ITU-T, ETSI and CAMEL specifications are
listed separately in Section B.16.1 ITU-T, ETSI, CS1+ and CAMEL parameters
on page 284.

Parameter Value (dec) Notes

AINPN_AccessCode 9
AINPN_AccumulatedDigits(i) 196 - 210 Note 2 (see page 308)
AINPN_ACGEncountered 14
AINPN_ADSIcpeID 29
AINPN_AlternateBillingInd 58
AINPN_AlternateCarrier 54
AINPN_AlternateTrunkGroup 52
AINPN_AMAAlternateBillingNumber 61
AINPN_AMABillingFeature 65
AINPN_AMABusinessCustomerID 62
AINPN_AMADigitsDialedWC(i) 71 - 75 Note 2 (see page 308)
AINPN_AMALineNumber(i) 69 - 70 Note 2 (see page 308)
AINPN_AMAMeasure 514
AINPN_AMASequenceNumber 18
AINPN_AMAServiceProviderID 67
AINPN_AMAslpID 63
AINPN_AMATimeDuration 637 Note 2 (see page 308)
AINPN_AMATimeGuard 638 Note 2 (see page 308)
AINPN_Amp1 15
AINPN_AmpCallProgInd 36
AINPN_AmpCLogName 38
AINPN_AmpCLogRepInd 35
AINPN_AmpCLogSeqNo 34
AINPN_AmpSvcProvID 39
AINPN_AmpTestReqInd 37
AINPN_AnnounceElement0(i) 524 - 533 Note 2 (see page 308)
AINPN_AnnounceElement1(i) 534 - 543 Note 2 (see page 308)
AINPN_AnswerIndicator 517
AINPN_ApplyRestrictions 68
AINPN_BearerCapability 545
AINPN_Blank(i) 76 - 90 Note 2 (see page 308)
AINPN_CallAppearanceID(i) 376 - 390 Note 2 (see page 308)

305
5 Non-Primitive Interface

Parameter Value (dec) Notes

AINPN_CalledAddress(i) 121 - 135 Note 2 (see page 308)
AINPN_CalledPartyID 3
AINPN_CalledPartyName(i) 286 - 300 Note 2 (see page 308)
AINPN_CalledPartyStationType 630
AINPN_CallingAddress(i) 241 - 255 Note 2 (see page 308)
AINPN_CallingGeodeticLocation 23
AINPN_CallingPartyBGID 546
AINPN_CallingPartyID 7
AINPN_CallingPartyName(i) 271 - 285 Note 2 (see page 308)
AINPN_Carrier 552
AINPN_CarrierUsage 66
AINPN_Cause(i) 136 - 150 Note 2 (see page 308)
AINPN_ChargeNumber 6
AINPN_ChargePartyStationType 8
AINPN_ClearCause 631
AINPN_ClearCauseData 634
AINPN_CollectedAddressInfo 10
AINPN_CollectedDigits 11
AINPN_ConnectedName(i) 331 - 345 Note 2 (see page 308)
AINPN_ConnectedNumber(i) 466 - 480 Note 2 (see page 308)
AINPN_Continuation(i) 106 - 120 Note 2 (see page 308)
AINPN_CTRConnection 20
AINPN_DateTimeOfDay(i) 361 - 375 Note 2 (see page 308)
AINPN_DestinationAddress 512
AINPN_DialingPlan 31
AINPN_DisconnectFlag 516
AINPN_Dn 26
AINPN_DPConverter 513
AINPN_EchoData 639
AINPN_ErrorCause 556
AINPN_ExtendedRinging 518
AINPN_FailureCause 632
AINPN_FailureCauseData 633
AINPN_FeatureAddress(i) 391 - 405 Note 2 (see page 308)
AINPN_FlexParameterBlk 522
AINPN_ForwardCallIndicators 550
AINPN_GenericAddress(i) 40 - 44 Note 2 (see page 308)

306
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Parameter Value (dec) Notes

AINPN_GenericDigits(i) 45 - 49 Note 2 (see page 308)
AINPN_GenericName 551
AINPN_Inband(i) 226 - 240 Note 2 (see page 308)
AINPN_InvokeID 1
AINPN_InvParms 557 Note 3 (see page 308)
AINPN_IPReturnBlock 635
AINPN_ISDNDeviceID 33
AINPN_JuristrictionInformation 21
AINPN_Lata 4
AINPN_LinkedID 2
AINPN_MaximumDigits 523
AINPN_MsrID 554
AINPN_NetworkSpecificFacilities 19
AINPN_NotificationInd(i) 166 - 180 Note 2 (see page 308)
AINPN_Null 0
AINPN_Ocn 553
AINPN_OperationCode 558
AINPN_OrigCalledName(i) 301 - 315 Note 2 (see page 308)
AINPN_OrigCalledNumber(i) 451 - 465 Note 2 (see page 308)
AINPN_OriginalCalledPartyID 547
AINPN_OrigRestrictions(i) 346 -360 Note 2 (see page 308)
AINPN_OutpulseNumber 50
AINPN_OverflowBillingInd 60
AINPN_Parameter 555
AINPN_PartyID 520
AINPN_PartyOnHold 521
AINPN_PassiveLegTreatment 56
AINPN_Prefix 22
AINPN_PrimaryBillingInd 57
AINPN_PrimaryTrunkGroup 51
AINPN_PrivateFacilityGID 28
AINPN_ProgressInd(i) 151 - 165 Note 2 (see page 308)
AINPN_Prompt(i) 181 - 195 Note 2 (see page 308)
AINPN_Reason(i) 256 - 270 Note 2 (see page 308)
AINPN_RedirectingName(i) 316 - 330 Note 2 (see page 308)
AINPN_RedirectingNumber(i) 436 - 450 Note 2 (see page 308)
AINPN_RedirectingPartyID 548

307
5 Non-Primitive Interface

Parameter Value (dec) Notes

AINPN_RedirectingReason(i) 496 - 510 Note 2 (see page 308)
AINPN_RedirectionInformation 549
AINPN_RedirectionName(i) 406 - 420 Note 2 (see page 308)
AINPN_RedirectionNumber(i) 421 – 435 Note 2 (see page 308)
AINPN_ResourceType 515
AINPN_RTPReroutingNumber 511
AINPN_RTPServiceIndicator 636
AINPN_Sap 16
AINPN_SecondAlternateBillingInd 59
AINPN_SecondAlternateCarrier 55
AINPN_SecondAlternateTrunkGroup 53
AINPN_ServiceContext 64
AINPN_Skip(i) 91 - 105 Note 2 (see page 308)
AINPN_SpcID 32
AINPN_Spid 25
AINPN_Ssp 30
AINPN_Status(i) 211 - 225 Note 2 (see page 308)
AINPN_STRConnection 17
AINPN_Tcm 13
AINPN_Text(i) 481 - 495 Note 2 (see page 308)
AINPN_TriggerCritType 5
AINPN_TriggerInformation 24
AINPN_TrunkGroupID 27
AINPN_TSTRCTimer 519
AINPN_VerticalServiceCode 12

Note 1: Parameter is a sequence of a primitive type.

Note 2: Parameter is a primitive inside a sequence of a constructed type in at
least one operation.
Note 3: Where an operation defines a sequence as ending with an ellipsis
element, additional parameters may be included at the end of the sequence.
The data from these additional parameters is stored in a single parameter
e.g. INPN_Ellipsis. As the format and encoding of these parameters is
inherently undefined in the specification, the entire parameter including tag,
length and data is stored in the parameter as it appears in the message
buffer. This allows the user to recover the largest range of additional
parameter data without requiring custom changes to the API library. If more
than one parameter is present in the ellipsis they are concatenated together
in the order they appear in the message and stored in the same ellipsis
parameter.

308
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

The AIN services also use the Extension Parameters defined for the INAP
services. The same parameter names and values are used, e.g.
INPN_Extension_Type (560-575). See Section B.15.

B.16.3 BCSM Event Codes

The following table lists the BCSM Event Codes used by INAP protocols.

Event Name Code

INEV_origAttemptAuthorized 1
INEV_collectedInfo 2
INEV_analyzedInformation 3
INEV_routeSelectFailure 4
INEV_oCalledPartyBusy 5
INEV_oNoAnswer 6
INEV_oAnswer 7
INEV_oMidCall 8
INEV_oDisconnect 9
INEV_oAbandon 10
INEV_termAttemptAuthorized 12
INEV_tCalledPartyBusy 13
INEV_tNoAnswer 14
INEV_tAnswer 15
INEV_tMidCall 16
INEV_tDisconnect 17
INEV_tAbandon 18
INEV_oTermSeized 19
INEV_oSuspended 20
INEV_tSuspended 21
INEV_origAttempt 22
INEV_oReAnswer 24
INEV_tReAnswer 25
INEV_facilityAcceptedAndAvailable 26
INEV_callAccepted 27
INEV_oChangeOfPosition 50
INEV_tChangeOfPosition 51
INEV_oServiceChange 52
INEV_tServiceChange 53

309
5 Non-Primitive Interface

The following table lists additional BCSM Event Codes used by CS1+ Protocol
only.

Event Name Code

INEV_CS1plus_oAlerting -1 0xff
INEV_CS1plus_oCallingPartyNotReachable -2 0xfe
INEV_CS1plus_oSuspended -3 0xfd
INEV_CS1plus_oReAnswer -4 0xfc
INEV_CS1plus_tRouteSelectFailure -5 0xfb
INEV_CS1plus_tAlerting -6 0xfa
INEV_CS1plus_tCallingPartyNotReachable -7 0xf9
INEV_CS1plus_tSuspended -8 0xf8
INEV_CS1plus_tReAnswer -9 0xf7

310
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

B.17 Supported INAP Operation Result

The following tables indicate those operations which have valid results and
the parameters supported for those results.

Note: Not all of the protocols supported include all of these operations.

INOP_ActivateServiceFiltering
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M

INOP_PromptAndCollectUserInformation
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M
DigitsResponse INPN_DigitsResponse 47 0x2f M

INOP_ActivityTest
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M

INOP_PromptAndReceiveMessage
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M
ReceivedStatus INPN_ReceivedStatus 631 0x277 M
RecordedMessageID INPN_RecordedMessageID 632 0x278 O
RecordedMessageUnits INPN_RecordedMessageUnits 633 0x279 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

311
5 Non-Primitive Interface

INOP_ProvideUserInformation
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
Received Information (size = 1 to 16) M
IA5String INPN_IA5String(n) 1261 to 0x4ed to O2
(n = 0 to 15) 1276 0x4fc

SupplimentaryServices INPN_SupplimentaryServices 1277 0x4fd O

SecurityParameters O
CertificationPath INPN_CertificationPath 1294 0x50e O2
DistinguishedName INPN_DistinguishedName 1295 0x50f O2
UTCTime INPN_UTCTime 1296 0x510 O2
Random INPN_Random 1297 0x511 O2
Target INPN_Target 1298 0x512 O2
Response INPN_Response 1299 0x513 O2
OperationCode INPN_OperationCode 1300 0x514 O2
AttributeCertificationPath INPN_AttributeCertificationPath 1301 0x515 O2
ErrorProtection INPN_ErrorProtection 1302 0x516 O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

INOP_ManageTriggerData
Parameter Mnemonic Value
dec hex
InvokeID INPN_InvokeID 1 0x1 M
ActionPerformed INPN_ActionPerformed 948 0x3b4 O
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

INOP_InitiateAssociation
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M

INOP_ConfirmedNotificationProvided
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M

312
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INOP_ConfirmedReportChargingInformation
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M

INOP_CreateCallSegmentAssociation
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M
NewCallSegment Association INPN_NewCallSegment Association 935 0x3a7 M
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

INOP_DisconnectLeg
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M

INOP_MergeCallSegments
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M

INOP_MoveCallSegments
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M

INOP_MoveLeg
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M

INOP_SplitLeg
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M

313
5 Non-Primitive Interface

INOP_NetworkCapability
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M
BearerCapabilities (Bitstring) INPN_Bits_BearerCapabilities 1286 0x506 O
HighLayerCompatiblities INPN_Bits_HighLayer Compatiblities 1287 0x507 O
(Bitstring)
SupplimentaryServices INPN_SupplimentaryServices 1277 0x4fd O
SecurityParameters O
CertificationPath INPN_CertificationPath 1294 0x50e O2
DistinguishedName INPN_DistinguishedName 1295 0x50f O2
UTCTime INPN_UTCTime 1296 0x510 O2
Random INPN_Random 1297 0x511 O2
Target INPN_Target 1298 0x512 O2
Response INPN_Response 1299 0x513 O2
OperationCod INPN_OperationCode 1300 0x514 O2
AttributeCertificationPath INPN_AttributeCertificationPath 1301 0x515 O2
ErrorProtection INPN_ErrorProtection 1302 0x516 O2
Extensions (see Appendix B.15 Operation Extensions on page 282) O
Ellipsis INPN_Ellipsis 112 0x70 A

INOP_ActivityTestGPRS
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M

INOP_ApplyChargingReportGPRS
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M

INOP_EntityReleasedGPRS
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M

INOP_EventReportGPRS
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M
314
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

AINOP_ResourceClear
Parameter Mnemonic Value
dec hex
InvokeID AINPN_InvokeID 1 0x01 M
ExtensionParameter (see Appendix B.15 Operation Extensions on page 282) O

AINOP_SendToResource
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M
Extensions (see Appendix B.15 Operation Extensions on page 282) O

315
5 Non-Primitive Interface

B.18 Supported INAP Errors

The following errors are currently supported to provide negative results for
the supported operations.
The meaning of each error is that defined in the ETSI INAP specification ETS
300 374-1 and EN 301 140-1. Not all errors are valid for all protocols.
The mnemonics identified below are defined in the in_inc.h header file
accompanying the API suite. They are used in the "err_name" parameter of
the IN_set_error() and IN_get_error() API functions.

Note: The "provider error" error indicates an error at the INAP - TCAP level. It may not
be sent by the User Application. It may be received in response to any operation
invoked by the user.

Error Mnemonic Valu Value

e (hex)
(dec)
Cancelled INER_Cancelled 0 0x0
CancelFailed INER_CancelFailed 1 0x1
16
Congestion INER_CS1P_Congestion 2 0x2
ETCFailed INER_ETCFailed 3 0x2
16
ErrorInParameterValue INER_CS1P_ErrorInParameterValue 3 0x3
ImproperCallerResponse INER_ImproperCallerResponse 4 0x4
16
ExecutionError INER_CS1P_ExecutionError 4 0x4
MissingCustomerRecord INER_MissingCustomerRecord 6 0x6
MissingParameter INER_MissingParameter 7 0x7
IllegalCombinationOfParameters16 INER_CS1P_IllegalCombinationOfParameters 7 0x7
ParameterOutOfRange INER_ParameterOutOfRange 8 0x8
16
InfoNotAvailable INER_CS1P_InfoNotAvailable 8 0x8
RequestedInfoError INER_RequestedInfoError 10 0xa
16
InvalidDataItemID INER_CS1P_InvalidDataItemID 10 0xa
SystemFailure INER_SystemFailure 11 0xb
TaskRefused INER_TaskRefused 12 0xc
16
NotAuthorized INER_CS1P_NotAuthorized 12 0xc
UnavailableResource INER_UnavailableResource 13 0xd
16
ParameterMissing INER_CS1P_ParameterMissing 13 0xd
UnexpectedComponent Sequence INER_UnexpectedComponent Sequence 14 0xe
UnexpectedDataValue INER_UnexpectedDataValue 15 0xf
UnexpectedParameter INER_UnexpectedParameter 16 0x10
UnknownLegID INER_UnknownLegID 17 0x11

16
A CS1+ protocol Error (some of these error codes share a value with a standard ETSI error code)
316
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Error Mnemonic Valu Value

e (hex)
(dec)
UnknownResource INER_UnknownResource 18 0x12
SCFReferral INER_SCF_Referral 21 0x15
SCFTaskRefused INER_SCF_TaskRefused 22 0x16
ChainingRefused INER_ChainingRefused 23 0x17
UnknownPDPID INER_UnknownPDPID 50 0x32
16
OtherError INER_CS1P_OtherError 100 0x64
ProviderError INER_provider_error 240 0xf0

AIN protocol error codes are defined in the following table.

Error Mnemonic Value Value

(dec) (hex)
ApplicationError AINEC_ApplicationError 1 0x01
FailureReport AINEC_FailureReport 2 0x02

317
5 Non-Primitive Interface

B.19 Supported INAP Error Parameters

The parameters that may be placed in the component structure using the
IN_set_component_param() function for each of the supported errors are
summarized below.
The format of the contents of each error parameter is defined in the
appropriate protocol specification.
The mnemonics identified below are defined in the in_inc.h header file
accompanying the API suite. They are used in the "param_name" parameter
of the IN_set_component_param() and IN_get_component_param() API
functions.

INER_CancelFailed
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M
CancelFailed_Problem INPN_CancelFailed_Problem 42 0x2a M
CancelFailed_Operation INPN_CancelFailed_Operation 43 0x2b M

INER_RequestedInfoError
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M
RequestedInfoError INPN_RequestedInfoError 44 0x2c M

INER_ImproperCallerResponse
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M
17
ImproperCallerResponse INPN_CS1P_ImproperCallerResponse 4440 0x1158 O

INER_SystemFailure
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M
SystemFailure INPN_SystemFailure 45 0x2d M

17
This Error parameter is mandatory for CS1+ protocol.
318
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

INER_TaskRefused
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M
TaskRefused INPN_TaskRefused 46 0x2e M

INER_provider_error18
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M
Provider Error INPN_provider_error 50 0x32 M

INER_CS1P_Congestion,
INER_CS1P_ErrorInParameterValue,
INER_CS1P_IllegalCombinationOfParameters,
INER_CS1P_InfoNotAvailable,
INER_CS1P_ParameterMissing,
INER_CS1P_InvalidDataItemID,
INER_CS1P_NotAuthorized,
INER_CS1P_ExecutionError,
INER_CS1P_OtherError
Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M
19
OperationReturnId INPN_CS1P_OperationReturnId 4439 0x1157 M

All other errors

Parameter Mnemonic Value Value
(dec) (hex)
InvokeID INPN_InvokeID 1 0x1 M

18
The "Provider Error" error indicates an error in the INAP - TCAP layers. The contents of the associated Provider Error
parameter are specified in Section 3.9 INAP Service Primitive Parameters on page 29.
19
For correct CS1+ operation, the INPN_CS1P_OperationReturnId parameter should be defined as the binary octet string,
{ 0x01, 0x00, 0x01 }
319
5 Non-Primitive Interface

The following tables show the format for AIN Error reporting.

AINEC_FailureReport
Parameter Mnemonic Value
dec hex
InvokeID AINPN_InvokeID 1 0x01 M
FailureCause AINPN_FailureCause 632 0x278 M
FailureCauseData AINPN_FailureCauseData 633 0x279 O
ExtensionParameter O

In the Application Error table below:

 ErrorCause is an enumerated type to identify the error.
 OpCode is the operation code of the failed message.
 Parameter represents the parameter, length and contents of the received
message
 InvParms represents the invalid parameter, which can be any AIN
parameter.

AINEC_ApplicationError
Parameter Mnemonic Value
dec hex
InvokeID AINPN_InvokeID 1 0x1 M
ApplicationErrorString M
ErrorCause AINPN_ErrorCause 556 0x22c M2
FailedMessage O
opCode AINPN_OperationCode 2 0x2 M2
parameter AINPN_Parameter 555 0x22b O2
invParams AINPN_InvParms 557 0x22d O2
UserID O
Dn AINPN_Dn 26 0x1a C2
BRI C2
Spid AINPN_Spid 25 0x19 M3
Dn AINPN_Dn 26 0x1a M3
TrunkGroupID AINPN_TrunkGroupId 27 0x1b C2
PrivateFacilityGID AINPN_PrivateFacilityGID 28 0x1c C2
ADSIcpeID AINPN_ADSIcpeID 29 0x1d C2

320
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

AINEC_ApplicationError
Parameter Mnemonic Value
dec hex
Ssp AINPN_Ssp 30 0x1e C2
DiallingPlan AINPN_DiallingPlan 31 0x1f C2
ExtensionParameter O

321
5 Non-Primitive Interface

Appendix C. Message Type Reference

C.1 Message Type Reference

The following table lists by message type all the messages described in this
manual.

Value Mnemonic Description

0x0003 MGT_MSG_TRACE_EV Message used to report traced messages
0x0008 MGT_MSG_EVENT_IND Message used to report internal management
events
0x07f8 INAP_MSG_ERROR_IND Message indicates an implementation specific
software event to the local management module
0x07f9 INAP_MSG_MAINT_IND Message used by INAP to indicate a protocol
related event to the local maintenance module
0x07fa INAP_MSG_EVENT_IND
0x07ff INAP_MSG_DEBUG_IND
0x17fb Confirmation to INAP_MSG_TRACE_MASK
(0x57fb)
0x17fc Confirmation to INAP_MSG_S_ERROR_MASK
(0x57fc)
0x17fd Confirmation to INAP_MSG_S_MAINT_MASK
(0x57fc)
0x2111 Confirmation to GEN_MSG_MOD_IDENT (0x6111)
0x37f4 Confirmation to INAP_MSG_CONFIG (0x77f4)
0x37f5 Confirmation to INAP_MSG_CNF_TIM (0x77f5)
0x37f6 Confirmation to INAP_MSG_CNF_AC (0x77f6)
0x37f7 Confirmation to INAP_MSG_CNF_FE (0x77f7)
0x57fb INAP_MSG_TRACE_MASK INAP Trace Mask Request - Message used to
configure INAP to trace messages sent or received
0x57fc INAP_MSG_S_ERROR_MASK INAP Software Event Mask Request Message used
to configure software error event tracing
0x57fd INAP_MSG_S_MAINT_MASK INAP Maintenance Mask Request - Message used
to configure maintenance event tracing
0x57fe INAP_MSG_DEBUG_MASK
0x6111 GEN_MSG_MOD_IDENT Read Revision Request - Message used to request
the module type and software revision number
0x77f4 INAP_MSG_CONFIG INAP Configuration Request - Message used to
configure the INAP module for operation
0x77f5 INAP_MSG_CNF_TIM INAP Timer Configuration Request - Message used
to set up default protocol timers for use by the INAP
module
0x77f6 INAP_MSG_CNF_AC INAP Application Context Configuration Request -
Message used to set up the internal Application
Context records

322
 Dialogic® DSI Protocol Stacks INAP Programmer's Manual Issue 15

Value Mnemonic Description

0x77f7 INAP_MSG_CNF_FE INAP Functional Entity Configuration Request -
Message used to set up the internal Functional
Entity records
0x77f8 INAP_MSG_NC_CONFIG
0x87f0 - Confirmation to INAP-SERVICE-REQ (0xc7f0)
0x87f1 INAP-SERVICE-IND INAP Service Indication Message - Used to receive
operation invokes, results or errors.
0x87f2 - Confirmation to INAP-DIALOGUE-REQ (0xc7f2)
0x87f3 INAP-DIALOGUE-IND INAP DialogueIndication Message - Used to receive
dialogue events from the INAP module.
0xc002 TM_EXP INAP module periodic “tick timer” message
0xc7f0 INAP-SERVICE-REQ INAP Service Request Message - Used to send
components to remote Functional Entities.
0xc7f2 INAP-DIALOGUE-REQ INAP Dialogue Request Message - Used to issue
dialogue commands to the INAP module.

Note: For more information on the MSG message structure, see Appendix A of the
Software Environment Programmer’s Manual.

323