JOINING IS OUR BUSINESS – WORLDWIDE
HPP-25 – PROCESS CONTROL (Industrie 4.0)
Key features
Process monitoring with
integrated riveting control
6 different control criteria
45 different riveting modes
Accurate rivet detection
during riveting cycle
Integrated archiving and
logging of process data
Detailed specifications
Mini SD card serves as storage for logger data (<2 GB)
Total hardware in semiconductor technology executed
All connections on the back side via quick disconnect
63 riveting programs can be stored and recalled
Up-/Download for parameter and riveting programs
Download for process data, riveting curves and alarm-history
Graphical display of riveting force and distance curve
45 different riveting modes are possible, including projection measurement and control to closing
head height H
Option: – Autocompensation (activating code necessary)
With: – PLC interface board (option); connection via plug X9
– 2 preset batch counters
– OK-, NOK rivet counter
Operating languages: CZ, DE, DK, EN, ES, FR, HU, IT, NL, PL, PT, RO, SE, SL, TR
BalTec Maschinenbau AG Obermattstrasse 65 CH-8330 Pfäffikon Tel. +41 44 953 13 33 baltec@baltec.com www.baltec.com
JOINING IS OUR BUSINESS – WORLDWIDE
Technical Data
Design: Sheet metal design with die cast front and rear panels
Degree of protection: IP53
Cable entry: All connections via quick disconnect
Supply voltages: 3 x 160-190 / 200-240 / 320-380 / 380-500 / 500-600 V
1 x 100-120 / 160-190 / 200-240 V
Interfaces: USB und Ethernet (UDP-Protocol)
Processor: ARM 9
Display: 5,7" Touchscreen, LED-backlit
Weight: 12 kg
Further dimensions: Please ask for our detailed dimensional drawings.
Subject to technical changes.
Connection plug assignement (rear panel)
X1: Valve down/up, sensor TDC X9: PLC Interface
X2: Release, start (foot switch) X11: Lower chamber
take over-sensor
X12: Upper chamber
X3: Grease, work lamp, grease sensor
X13: Path measuring
X4: E-Stop, two-hand
X14: Switch NHE
X5: Pressure / Flow control valve, rapid /
X20: Power supply
working speed valve, sensor BDC
X21: Riveting motor
X6: External reset and safety circuit
X22: Hydraulic motor
X7: Depending on execution,
see operating instructions
X8: Depending on execution,
see operating instructions
HPP 18/11.1 EN
BalTec Maschinenbau AG Obermattstrasse 65 CH-8330 Pfäffikon Tel. +41 44 953 13 33 baltec@baltec.com www.baltec.com
