Product Data
Section 5: Sheet 40
® ® UL c UL
C-L-X Okoseal-N P-OS
® ®
UL Type MC-HL and cUL Type ACIC-TC Instrumentation Cable
Single Pair or Triad-Overall Shield
600 Volts 90°C Rating - 600/1000V Marine Shipboard Cable
For Cable Tray Use - Sunlight Resistant - For Direct Burial
Specifications Product Features
Conductors: Bare soft annealed copper, Complete pre-packaged, factory-tested wiring
A
Class B, 7-strand concentric per ASTM B-8. system—color coded.
B Insulation: Flame-retardant Okoseal (PVC) C-L-X enclosure permits installation in cable
per UL 83, 15 mils nominal thickness, 90°C tray containing light and power cables without a
C temperature rating. barrier separator.
Jacket: Nylon per UL 83, 8 mils nominal Impervious, continuous sheath excludes
D thickness. moisture, gases and liquids.
Conductor Identification: Pigmented black Excellent compression and impact resistance.
and white in pairs; black, white and red in Lower installed system cost than conduit or
E triads. EMT systems.
F Assembly: Pairs or triads assembled with Suitable for low temperature installation to
left-hand lay. -40°C.
G Cable Shield: Aluminum/Polyester tape
overlapped to provide 100% coverage, and a
Applicable Standards
#16 AWG stranded tinned copper drain wire. • UL listed for cable tray use, direct burial and
Inner Jacket: Black, flame-retardant Okoseal sunlight resistant.
H per UL 1569. A rip cord is laid longitudinally • Vertical Tray Flame Tests.
IEEE 383-1974, FT4/IEEE 1202,
OKONITE SP-OS 12 PR 16 AWG CU X-OLENE (XLPE)
OKONITE 6 P-OS 1 PR 16 AWG CU X-OLENE (XLPE)
under the jacket to facilitate removal.
C-L-X Sheath: A close-fitting, impervious, ICEA T-29-520 (210,000 BTU)
J continuously welded and corrugated, • American Bureau of Shipping Type approved
P-OS 1PR 16 AWG CU PVC-N PVC (UL)
aluminum sheath meeting UL 1569 provides as CWCMC Type MC-HL.
complete protection against moisture, liquids, • API Standards 14F and 14FZ.
and gases, has excellent mechanical • UL 2225 Type MC-HL
strength, and provides equipment grounding • UL 1309 (CWCMC) Marine Shipboard
through the sheath. • UL certified as Marine Shipboard in accord
Outer Jacket: Black, flame-retardant with IEEE 1580, rated 600/1000 volts.
Okoseal per UL 1569. • NPLF per NEC Article 760.
• CSA C22.2 No. 230 Type TC
Applications • CSA C22.2 No. 239 Type ACIC
Okonite C-L-X Single pair or triad type P-OS
instrumentation cables are designed for use
on Class 1 Remote-Control Signaling circuits
or where a 600V cable is desired, as
instrumentation, process control, or discrete
signals at levels above 100 milli-volts in
circuits where shielding against external
interference is required, but shielding against
interference among groups is not required.
For use indoors or outdoors; wet or dry
locations; in cable trays; in raceways;
supported by a messenger wire; for direct
burial; in Classes I, II, and III, Divisions 1 and
2 hazardous locations per NEC Articles 501,
A Bare Stranded Copper Conductor 502, 503, and 505.
B Okoseal Insulation/Nylon Jacket The overall shield eliminates most of the
C Twisted, Shielded Pairs/Triads static interference from the electric field
D Tinned Stranded Copper Drain Wire
E Aluminum/Synthetic Polymer Tape
radiated by power cables and other electrical
F Rip Cord equipment.
G Inner Black Okoseal Jacket The C-L-X sheath provides physical
H Impervious, Continuous, Corrugated protection against mechanical damage as
Aluminum C-L-X Sheath
J Outer Black Okoseal Jacket well as complete protection against moisture
or gases entering the cable.
For dc service in wet locations, X-Olene
insulation is recommended.
® ®
C-L-X Okoseal-N P-OS Product Data
UL Type MC-HL and cUL Type ACIC-TC Instrumentation Cable
Single Pair or Triad-Overall Shield Section 5: Sheet 40
600 Volts 90°C Rating - 600/1000V Marine Shipboard Cable
For Cable Tray Use - Sunlight Resistant - For Direct Burial UL c UL
® ®
Conductors: #16 AWG; Okoseal Insulation: 15 mils: Nylon Jacket: 8 mils
#16 AWG - Single Pair & Triad (P-OS) Type MC-HL
es
s nch es l
er irs ad s -i ch t ils
t na
b a ri t mil . in ke s
um f P f T
k e - k
t
e O . D . - c ke -m ac he c tio in. ht ’ gh ’
t
o s s J . ig 000 ei 000
N r o er ac es ac nal .D Ja es a l inc Se Sq
og e b J n J i O r n n - s - * e 1 W / 1
tal b
m um
r k
ne ic
r
ne om L-
X te k
ut ic
i
m .D. os ea t W s./ hip bs.
Ca Nu N In Th In N C- O Th No O Cr Ar Ne Lb S L
▲564-60-3401 1 66 .35 .53 50 .64 0.32 182 221
▲564-65-3401 1 58 .35 .53 50 .64 0.32 190 229
564-60-3403 3 40 .45 .67 50 .78 0.48 247 640
▲ Authorized Stock Item. Available from our Customer Service Centers.
ELECTRICAL SPECIFICATIONS * Cross-sectional area for calculation of cable tray fill in accordance with
NEC Section 392.22.
Jackets: Optional jacket types available - consult local sales office.
Conductor Resistance, maximum..............................ohms/1000 ft. Copper or bronze C-L-X available on special order.
...................................................................................@20°C @25°C To Order C-L-X Type P-OS without the outer Okoseal jacket (not “HL” listed),
16 AWG ....................................................................4.34............4.43 change the sixth digit of the catalog number from 3 to 1, for example to order
Insulation Test Voltage (spark test)....................................6000 Volts ac 1 pr. 20 AWG with a bare aluminum C-L-X, the catalog number would be 564-10-1212.
Length Tolerance: Cut lengths of 1000 ft. or longer are subject to a tolerance of + \ -10%;
Dielectric Test Voltage .......................................................2000 Volts ac less than 1000 feet + \ -15%.
Shield Isolation Test
Pair to Cable Shield............................exceeds 100 Megohms-1000 ft.
Insulation Resistance Constant @60°F minimum
(natural material typical value................2000 Ohms-1000 ft.
Loop Resistance, nominal (2 conductors).............ohms/1000 ft.
..............................................................................@20°C.............@25°C
16 AWG ...............................................................8.68..................8.86
Mutual Capacitance (PF/ft.)*
#16.......................................................................60
*Typical Value
THE OKONITE COMPANY
Q/23060540 Ramsey, New Jersey 07446
