LGHP 2/1
High performance, high temperature bearing grease
A premium quality mineral oil based grease, using a modern Polyurea (di-urea)
thickener. It is suitable for electric motors and similar applications.
• Extremely long life at high temperatures
• Wide temperature range
• Excellent corrosion protection
• High thermal and mechanical stability
• Good start-up performance at low temperatures
• Compatibility with common polyurea and lithium tickened greases
• Low noise properties
Overview
Dimensions
Product weight 1 kg
Performance
Suitable for High load applications −
Suitable for Vertical shaft applications Ο
Suitable for applications +
with Oscilating movements
Suitable for applications −−
with Severe vibrations
Suitable for applications ++
that require Rust protection
Suitable for applications ++
that require Water resistance
Suitable for applications that Ο
require Frequent start-up
Speed (max.) n x dm (x 1000) 300
Operating temperature range -40 – 150 °C
Dropping point (min) ISO 2176 240 °C
Penetration DIN ISO 2137, 245 - 275
Worked, 60 strokes (10
Penetration DIN ISO 2137, Prolonged 365 max.
(max.), 100 000 strokes, 10
Mechanical stability - Roll stability, 365 max.
Generated from www.skf.com on 2023-07-24 Page 1 of 3
ASTM D1831 (max.) 50 hrs at 80°C,
10
Mechanical stability, V2F test, 144 hrs -
Corrosion protection, Emcor, 0-0
ISO 11007, Distilled water
Corrosion protection, Emcor, ISO 0-0
11007 modified, Water washout
Corrosion protection, Emcor, 0-0
ISO 11007 modified, 0.5% NaCl
Water resistance (max.) DIN 1
51807/1, 3 hrs at 90 °C
Oil separation DIN 51817, 40°C, % 3 max.
Lubrication ability, R2F test B at 120°C Pass at 100°C
Copper corrosion (max.) DIN 51811 1 max. at 150°C
/ASTM D4048, 24 hrs at 100°C
Rolling bearing grease life (max.) ROF 1000 at 150°C
test, L50 life, 10000 r/min, hrs at °C
Low temperature torque, 1000/300 at
Start/Running, mNm -40°C Properties
DIN 51825 code K2N-40
NLGI consistency class 2-3
Thickener Polyurea
Colour Blue
Base oil type Mineral
Base oil viscosity DIN 51562 at 40 °C 96 mm
Base oil viscosity DIN 51562 at 100 °C 10.5 mm
Shelf life 5 year
Packsize 1 kg can
Available for single point lubrication no
Generated from www.skf.com on 2023-07-24 Page 2 of 3
Terms and conditions
By accessing and using this website / app owned and published by AB SKF (publ.) (556007-3495 ·
Gothenburg) (“SKF”), you agree to the following terms and conditions:
Warranty Disclaimer and Limitation of Liability
Although every care has been taken to assure the accuracy of the information on this website / app, SKF provides this
information "AS IS" and DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. You acknowledge that your
use of this website / app is at your sole risk, that you assume full responsibility for all costs associated with use of this
website / app, and that SKF shall not be liable for any direct, incidental, consequential, or indirect damages of any kind
arising out of your access to, or use of the information or software made available on this website / app. Any warranties
and representations in this website / app for SKF products or services that you purchase or use will be subject to the
agreed upon terms and conditions in the contract for such product or service. Further, for non-SKF websites / apps that
are referenced in our website / app or where a hyperlink appears, SKF makes no warranties concerning the accuracy or
reliability of the information in these websites / apps and assumes no responsibility for material created or published by
third parties contained therein. In addition, SKF does not warrant that this website / app or these other linked websites /
apps are free from viruses or other harmful elements.
Third Party Services
When viewing YouTube content via the SKF website(s) (i.e. using YouTube API Services), you agree to be bound by the
YouTube Terms of Service.
Copyright
Copyright in this website / app copyright of the information and software made available on this website / app rest with
SKF or its licensors. All rights are reserved. All licensed material will reference the licensor that has granted SKF the right
to use the material. The information and software made available on this website / app may not be reproduced,
duplicated, copied, transferred, distributed, stored, modified, downloaded or otherwise exploited for any commercial use
without the prior written approval of SKF. However, it may be reproduced, stored and downloaded for use by individuals
without prior written approval of SKF. Under no circumstances may this information or software be supplied to third
parties.
This website /app includes certain images used under license from Shutterstock, Inc.
Trademarks and Patents
All trademarks, brand names, and corporate logos displayed on the website / app are the property of SKF or its licensors,
and may not be used in any way without prior written approval by SKF. All licensed trademarks published on this website
/ app reference the licensor that has granted SKF the right to use the trademark. Access to this website / app does not
grant to the user any license under any patents owned by or licensed to SKF.
Changes
SKF reserves the right to make changes or additions to this website / app at any time.
Generated from www.skf.com on 2023-07-24 Page 3 of 3
