g

DPI 603 GE Druck

 Accuracy 0.075% standard

 Integral pressure/vacuum generation

 Standard ranges up to 20 barg

 5 digit LCD display, multiple scales

 Dual pressure and electrical readout

 Transmitter supply and measurement

The cost effective DPI 603, which extends the Pressure Scale Units Physical Specification
GE Druck range of rugged portable battery 24 scale units plus special.
Weight
powered pressure calibrators, has standard
4kg nominal.
ranges of -1 to +1 bar, 2 bar, 10 bar or 20 bar Display Overload
gauge with an accuracy of 0.075%. 120% F.S. nominal.
Dimensions
320mm x 195mm x 125mm.
Designed for use in remote locations where Resolution
a.c. power is not available, the DPI 603 0.005% F.S. maximum.
Pressure Connection
enables pressure instrumentation to be
G1/8 female or 1/8’’ NPT (female).
serviced and calibrated. Response
Three readings per second. OPTIONS
The instrument features the capability to
generate test pressures with an integral hand- Zero Control
(A) Pressure/Vacuum Capability
pump up to 20 barg. A volume adjuster Pressure and electrical. Protected against
provides fine control of the desired test value accidental use. A switch facility enables the integral hand-pump to
and a venting valve enables pressure release generate pressure in the down stroke to a maximum
without disconnection of the device under test. Calibration of 20 bar gauge, or vacuum on the reverse stroke to
Front panel key pad calibration. -850mbar gauge.
An optional pressure/vacuum switching facility
can also be provided, which enables the hand- Position effect (B) Rechargeable Batteries
pump to source vacuum down to -850 mbarg. Negligible. Ni-Cad rechargeable cells can be supplied complete
with an external charger unit.
To facilitate pressure transmitter testing and
calibration, an energising voltage of 24V d.c. is
Electrical Specification
(B1) UK 240V a.c. plug version
provided and the ability to monitor the loop Electrical Inputs (B2) USA 110V a.c. plug version
current over the range 0 to 55mA d.c. Voltage Measurement:- (B3) European 220V a.c. plug version
Range 50V (B4) 110V a.c. cable version.
For loop verification, the DPI 603 can also Accuracy 0.15% of reading
output a single 12mA test value, or provide a 0.02% F.S. ACCESSORIES
passive sink if required. Temperature Coefficient 0.01% reading/C
Current Measurement:- Carrying case, electrical test probes, calibration
Range 55mA certificate and user handbook supplied with
The clear LCD display allows readout of
Accuracy 0.075% of reading instrument.
pressure, voltage and current parameters with
the ability to show current or voltage 0.005% F.S.
Temperature Coefficient 0.01% reading/C
ORDERING INFORMATION
simultaneously with pressure.
Please state the following (where applicable):-
STANDARD SPECIFICATIONS Electrical Outputs (1) Type number
Voltage Output:- (2) Pressure range
24V nominal, floating, 25mA maximum (3) Pressure connection
Pressure Measurement
Current Output:- (4) Options
Specification Loop check, fixed 12mA nominal, source or (5) Pressure media
Operating Pressure Ranges sink.
Standard full scale ranges can be specified of Continuing development sometimes necessitates
-1bar g to: +1 bar, +2 bar, +10 bar or +20 bar Power Supply specification changes without notice.
gauge. Battery powered 4 x 1.5V zinc carbon ‘D’ cells,
50 hours nominal continuous operation with no RELATED PRODUCTS
Over Pressure load on output terminals. Battery low condition GE Druck manufacture a comprehensive range of
4 x causing negligible calibration change to a indicated by display symbol. pressure indicators, controllers, calibrators,
maximum of 25 bar. Optional rechargeable batteries and external transducers and transmitters. .
power adaptor/charger unit available. The range of portable calibrators also covers
Pressure Media temperature and electrical parameters.
Compatible with most common gases. Environmental Specification Please refer to manufacturer for further information
and data sheets.
Accuracy Temperature
Combined non-linearity, hysteresis and Operating -10 to +50C CALIBRATION STANDARDS
repeatability 0.075% F.S. 1 digit. Calibrated 0 to 40C
Storage -20 to +60C Instruments manufactured by GE Druck are
calibrated against precision pressure calibration
Temperature Effects equipment which is traceable to International
Over 0 to 40C, the averaged Span Sealing
Sealed to IP65 Standards.
temperature coefficient will not exceed
0.0125% of reading/C.
Safety
Electrical and Mechanical Safety EN61010
Digital Indicator EMC Emissions EN50081-1
Readout and Display EMC Immunity EN50082-1
99999 capability, 13.6mm LCD digits with Certification CE Marked.
additional 16 text characters.

Druck Limited Agent:

g GE Druck
Fir Tree Lane, Groby, Leicester, LE6 0FH, UK
+44 (0)116 2317100 Fax:+44 (0)116 2317103
E-Mail: sales@druck.com www.druck.com 11/03