5365 (Wiegand)

MiniProx® Reader
5368 (Clock-and-Data)
Proximity Card Reader

Application

The MiniProx proximity card reader’s potted electronics

and slim, attractive design are ideal for indoor or
outdoor mounting.

Features

• Accepts 5 to16 volts, meeting most voltage

requirements.
• Available with Wiegand or Clock-and-data
interface.
• Allows easy upgrade from magstripe to a
proximity reader; no rewiring or pulling of new
cable required.
• Offers high reliability, consistent read-range and
low power consumption in an easy-to-install
package.
• Mounts directly onto metal with no change in
read range performance.
• Provides multicolor LED, compatibility with all
standard access control systems and internal or
host control of LED and beeper.

Designer

Hazardous Location
MiniProx shown with
incorporated junction box
rated for use in hazardous
locations.

CLASSIC

An ASSA ABLOY Group company

 MiniProx® Reader
Features Specifications
Mounting: unobtrusive design mounts directly onto metal such as door Typical maximum* read range
mullions. ProxCard® II card - up to 5.5" (14 cm)
ISOProx® II card - up to 5" (12.5 cm)
Hazardous Location MiniProx reader Mounting: designed to mount onto DuoProx® II card – up to 5” (12.5 cm)
a junction box included with each reader. The junction box is attached to ProxKey™ II keyfob - up to 2" (5 cm)
an appropriate surface location utilizing four holes. ProxCard Plus™ card - up to 2” (5 cm)
Smart ISO/DuoProx™ cards – up to 5” (12.5 cm)
Audiovisual indication: when a proximity card is presented to the reader, Proximity & MIFARE™ card - up to 5” (12.5 cm)
the red LED flashes green and the beeper sounds. The multicolor LED and *Depending on local installation conditions.
beeper can also be controlled individually by the host system.
Dimensions:
Diagnostics: on reader power-up, an internal self-test routine checks and 6.0" x 1.7" x 1.0"
verifies the setup configuration, determines the internal or external (15.2 x 4.3 x 2.54 cm)
control of the LED and beeper, and initializes reader operation. An
Material: Polycarbonate UL 94
additional external loop-back test allows for the reader outputs and inputs
to be verified without the use of additional test equipment.
Power supply:
Standard MiniProx: 5-16 VDC
Indoor/outdoor design: sealed in a rugged, weatherized polycarbonate Haz. Loc. MiniProx: 5-16 VDC
enclosure designed to withstand harsh environments, providing reliable Linear power supplies are recommended.
performance and a high degree of vandal resistance.
Current requirements:
Easily interfaced: Wiegand output model interfaces with all existing Average: 30 mA (5 VDC); 20 mA (12 VDC)
Wiegand protocol access control systems. Clock-and-Data (magnetic Peak: 110 mA (5 VDC); 110 mA (12 VDC)
stripe) model interfaces with most systems that accept magnetic stripe
readers. Operating temperature:
-22° to 150° F (-30° to 65° C)
Hazardous Location MiniProx reader Interface: can be operated with any
facility code and card number format requirements using the Wiegand Operating humidity:
protocol. 0-95% relative humidity non-condensing

Security: Recognizes card formats up to 85 bits, with over 137 billion Weight:
unique codes. With terminal strip 3.5 oz. (99 gm)
With pigtail 3.8 oz. (108 gm)
Warranty: warranted against defects in materials and workmanship for Haz. Loc. MiniProx: 3.8 oz. (108 gm)
life from date of shipment (see complete warranty policy for details).
Transmit frequency: 125 kHz
Part numbers: Excite frequency: 125 kHz
Base Part No.: 5365 Wiegand interface
Base Part No.: 5368 Clock-and-data interface Cable distance:
Description: Tri-State LED, Internal beeper on Wiegand interface: 500 feet (150 m)
Options: Clock-and-data interface: 50 feet (15 m)
• CLASSIC series cover in white, beige, charcoal gray, or black or Recommended cable is ALPHA 1295 (22 AWG)
• Designer series cover in white, wave blue, charcoal grey, or black 5 conductor minimum stranded with overall shield or
equivalent. Additional conductors may be required
• LED and beeper operation
for LED or beeper control.
• custom label
(Please see “How to Order Guide” for a description of the options and
Certifications:
associated part numbers).
Canada/UL 294 Listed: Access Control System Units
Canada/UL 1604 Listed (with Haz. Loc. junction box
only): Hazardous Locations Class I, Div. 2, Groups
A,B,C,D.
FCC Certification, United States
CARD PRES. 10 VIOLET Canada Certification
HOLD 9 BLUE
BEEPER 8 YELLOW EU and CB Scheme Electrical Safety (EN60950 and
IEC60950 ITE Electrical Safety)
Fifteen EU Countries under the R&TTE Directive (EN
RED LED 7 BROWN 300 330 - SRD, and ETS 300 683 - EMC)
6.00" GRN LED 6 ORANGE
(15.2 cm) SHIELD GND 5 DRAIN
CE Mark
DATA-1 4 WHITE Australia C-Tick
DATA-0 3 GREEN New Zealand
GROUND 2 BLACK
VDC 1 RED LIT5365DS 11/01, supersedes 3/01

www.HIDCorp.com
9292 Jeronimo Road
Irvine, CA 92618-1905 U.S.A.
+1 (949) 598-1600 or (800) 237-7769
FAX +1 (949) 598-1690
1.70"
(4.3 cm) 1.00"
(2.54 cm)
Printed in the U.S.A. Specifications subject to change without notice. ©2001 HID Corporation