FILE NO

SERVICE MANUAL TC-L32XM6

LED TV TC-L32XM6X
TC-
TC-L32XM6P

Downloaded from www.Manualslib.com manuals search engine

 CONTENTS

1. Safety precautions .................................................................................................3

2. Alignment instructions and method of software upgrading.....................................5
3. Working principle analysis of the unit ................................................................... 12
4. Specifications.......................................................................................................13

5. Block diagram ......................................................................................................14

6. IC block diagram ..................................................................................................17
7. Wiring diagram ...................................................................................................24
8. Troubleshooting guide..........................................................................................28
9. Schematic diagram ..............................................................................................32
10. APPENDIX-A: Assembly list
APPENDIX-B: Exploded View

11.Disassembly and Assembly Instructions

Downloaded from www.Manualslib.com manuals search engine

 Attention: This service manual is only for service personnel to take reference with. Before servicing
please read the following points carefully.

Safety precautions
1. Instructions
Be sure to switch off the power supply before replacing or welding any components or
inserting/plugging in connection wire Anti static measures to be taken (throughout the entire production
process!):
a) Do not touch here and there by hand at will;
b) Be sure to use anti static electric iron;
c) It’s a must for the welder to wear anti static gloves.
Please refer to the detailed list before replacing components that have special safety requirements.
Do not change the specs and type at will.

2. Points for attention in servicing of LED

2.1 Screens are different from one model to another and therefore not interchangeable. Be sure to
Use the screen of the original model for replacement.
2.2 The operation voltage of LED screen is high voltage. Be sure to take proper measures in
protecting yourself and the machine when testing the system in the course of normal operation or
right after the power is switched off. Please do not touch the circuit or the metal part of the module
That is in operation mode. Relevant operation is possible only one minute after the power is switched
off.
2.3 Do not use any adapter that is not identical with the TV set. Otherwise it will cause fire or damage
to the set.
2.4 Never operate the set or do any installation work in bad environment such as wet bathroom,
laundry, kitchen, or nearby fire source, heating equipment and devices or exposure to sunlight etc.
Otherwise bad effect will result.
2.5 If any foreign substance such as water, liquid, metal slices or other matters happens to fall into the
module, be sure to cut the power off immediately and do not move anything on the module lest it should
cause fire or electric shock due to contact with the high voltage or short circuit.
2.6 Should there be smoke, abnormal smell or sound from the module, please shut the power off at
once. Likewise, if the screen is not working after the power is on or in the course of operation, the
power must be cut off immediately and no more operation is allowed under the same condition.
2.7 Do not pull out or plug in the connection wire when the module is in operation or just after the
power is off because in this case relatively high voltage still remains in the capacitor of the driving
circuit. Please wait at least one minute before the pulling out or plugging in the connection wire.
2.8 When operating or installing LED please don’t subject the LED components to bending, twisting or
extrusion, collision lest mishap should result.
2.9 As most of the circuitry in LED TV set is composed of CMOS integrated circuits, it’s necessary to
pay attention to anti statics. Before servicing LED TV make sure to take anti static measure and
ensure full grounding for all the parts that have to be grounded.
2.10 There are lots of connection wires between parts behind the LED screen. When servicing or
moving the set please take care not to touch or scratch them. Once they are damaged the screen
would be unable to work and no way to get it repaired.
If the connection wires, connections or components fixed by the thermo tropic glue need to disengage
when service, please soak the thermo tropic glue into the alcohol and then pull them out in case of
damage.

Downloaded from www.Manualslib.com manuals search engine

 2.11 Special care must be taken in transporting or handling it. Exquisite shock vibration may lead to
breakage of screen glass or damage to driving circuit. Therefore it must be packed in a strong case
before the transportation or handling.
2.12 For the storage make sure to put it in a place where the environment can be controlled so as to
prevent the temperature and humidity from exceeding the limits as specified in the manual. For
prolonged storage, it is necessary to house it in an anti-moisture bag and put them altogether in one
place. The ambient conditions are tabulated as follows:

Temperature Scope for operation 0 ~ + 35 oC

Scope for storage -20 ~ + 60oC
Humidity Scope for operation 20% ~ 80 %
Scope for storage 10% ~ 90%

2.13 Display of a fixed picture for a long time may result in appearance of picture residue on the
screen, as commonly called “ghost shadow”. The extent of the residual picture varies with the maker
of LED screen. This phenomenon doesn’t represent failure. This “ghost shadow” may remain
in the picture for a period of time (several minutes). But when operating it please avoid displaying still
picture in high brightness for a long time.

3. Points for attention during installation

3.1 The front panel of LED screen is of glass. When installing it please make sure to put it in place.
3.2 For service or installation it’s necessary to use specified screw lest it should damage the screen.
3.3 Be sure to take anti dust measures. Any foreign substance that happens to fall down between the
screen and the glass will affect the receiving and viewing effect
3.4 When dismantling or mounting the protective partition plate that is used for anti vibration and
insulation please take care to keep it in intactness so as to avoid hidden trouble.
3.5 Be sure to protect the cabinet from damage or scratch during service, dismantling or mounting.

Downloaded from www.Manualslib.com manuals search engine

 2. Alignment instructions
(1) Test equipment
VG-859 (YPbPr, VGA, HDMI signal generator)
FLUKE 54200(TV signal generator)
CA310 (white balancer)
(2) Power test
Connect main board, power board and IR board according the wiring diagram, connect
the power and press power key (Remote controller or Keypad) button to turn on the TV.
a) Test the pin voltage of P802/power board , the data is shown in table1:

Table1 voltage data of P802

For 32”
P802 Pin1,2 Pin3,4 Pin5,6,7 Pin8,9 Pin10,11

Voltage GND 11.4V~12.6V GND 11.4V~12.6V 4.75V~5.25V

For 32”
Pin12 Pin13 Pin 14 Pin15 Pin16
On:2.5V~5.25V Normal: 2.0~5V On:2.5V~5.25V
Duty 5%~100% NC
Off: 0~0.5V Abnormal :0~0.5V Off: 0~0.5V

Downloaded from www.Manualslib.com manuals search engine

 (3) Alignment flow-chart
The alignment flow-chart is shown as fig-1

Check if EDID, HDCP KEY, FLASH are written

Combined test for general assembly

Auto Gamma adjustment

Connect to the center signal source and check each

Function of TV (station leaking, analog control, etc.)
Check the output of speaker.

Input AV signal and check the function

Input HD signal and check the function of YPbPr

Input USB signal and check if the display is normal, check

the function (analog control), horizontal/vertical center, etc.

Input HDMI signal and check if the display is normal, check

the function (analog control), horizontal/vertical center, etc.
Checking SPDIF will output the signal on Amplifier.

Preset ex-factory

Check the accessories and packing

Fig-1 adjustment flow-chart

Downloaded from www.Manualslib.com manuals search engine

 (4) Adjustment instruction

At any input source then press the “←”, “EXIT” and “OK” (using RC within 1 sec) to enter factory mode
During Factory menu, if “EXIT” key is pushed, system will exit factory mode.

4-1. Auto Gamma Adjustment & Check

4-2.1. Set into factory mode then choose Auto Gamma Adjust,
4-2.2. Press "2" "3" "2" "4" in turn within 1sec to enter the item, and push Init will self-generate gray pattern
for adjusting.

4-2.3. Following the Cool spec as bellow.

Color Cool
100IRE 0.2677
x
50IRE 0.2684
100IRE 0.2655
y
50IRE 0.2671

Adjust
±0.005
Tolerance

(1) Adjust 100IRE

First, Decrease G to meet y spec(0.2655).
Second, Decrease R to meet x spec(0.2677).
(2) Adjust 50IRE
First, Decrease G to meet y spec(0.2671).
Second, Decrease R to meet x spec(0.2684).
Note: Do not adjust the B GAIN on both 100IRE and 50IRE.
When match the spec, pressing “Save” then exit the adjustment page.

() When match the spec, pressing right key in "Save" position then exit the adjustment page.
4-2.4. Exit Factory Mode:
After finish Gamma adjust press [EXIT] to exit factory mode.

Downloaded from www.Manualslib.com manuals search engine

 (5) Items of Factory menu
When in any source, press the “Left -> Exit -> Enter” key of remote control can enter into factory mode.
During Factory menu, only “EXIT” key is pushed, system will exit factory mode.
Press up and down key can move high light item from Model Change -> Color Temp. Adjust -> Auto Gamma
Adjust -> Timer Clear -> Preset Channel -> Full Power -> ADC Calibration -> Shipping reset -> Bypass Gamma ->
UART Enable -> I2C -> Boot Loader Upgrade -> V-Com Adjust -> SG Pattern.
Push “Enter” key can enter high light item function. (Press left and right can adjust value)
Display Model version, Release Date, firmware version and released date on the bottom.

1)Model ID
Press up or down key can select high light item function
Press enter or right key to enter the item.
It's only used for FW engineer.
2)Color Temp. Adjust
Press up or down key can select high light item function
Press enter or right key to enter the item.
It's only used for PQ engineer.
3)Auto Gamma Adjust
Press up or down key can select high light item function
Press enter or right key to enter the item.
It's only used for PQ engineer.
4)Timer Clear
Reset the timer which records hours of LED panel burn in
This item will have a check dialog “yes or no” to do or not.
- Time in factory mode: Time function shall be displayed automatically. Saving the total time of system
power on (LED turn on), and count the time automatically. The timer is continuous and saved (per 10
minutes) forever, unless it will be reset by doing “Timer Clear”.
5)Preset channel
Load preset channel for production line.
6)Full Power
This is for power consumption testing.
To measure the maximum power consumption of TV set, we adjust the value of following items to
maximum.
- Video: Contrast maximum value, Brightness maximum value, Backlight maximum value.
- Audio: Volume maximum value, Bass default value, Treble default value.
Press enter key to turn on Full Power and OSD stay display until press enter key to recover from Full
Power.

Downloaded from www.Manualslib.com manuals search engine

 7)ADC Calibration
ADC Calibration function is reserved for calibration by hand (PQ engineer only).
8)Shipping reset
Reset all settings of OSD menu to default value.
Reset settings: Channel table, Model table (H/V Position, Clock, Phase), Source dependent setting
(Contrast, Brightness etc.), Common setting (Volume, Language etc.), Parental Control (Rating,
Password etc), Closed Caption.
9)Bypass Gamma
For factory test value of gamma.
10)UART Enable
Enable to communicate with Auto-Alignment system.
11)I2C
Enable to communicate with Eeprom burn-in tool.
12)Boot Loader Upgrade
For firmware downgrade used.
13)V-Com Adjust
It's reserved for BMS function.
14)SG Pattern
Aging is for factory burn in and PTN ID provides each pattern for tester using.

(6) Performance check

6-1 TV function
Connect RF to the center signal source, enter Channel menu → auto tuning, check if there are channels be
skipped, check if the picture and speaker are normal.

6-2 AV terminals
Input Video signal, check if the picture and sound are normal.

6-3 YPbPr terminal

Input YUV signal (VG859 signal generator), separately input the YUV signals listed in table4 and check if the
display and sound are normal at any situation (power on, channel switch and format convert, etc.)

Table4 YUV signal format

SYNC PIXEL SYNC BACK

FREQ PERIOD Display
POLARITY CLOCK WIDTH PORCH

MODE
LINE(kHz) LINE (pixel) LINE (pixel) LINE (pixel) LINE (pixel)
LINE
FRAME FIELD (MHz) FRAME FRAME FRAME
FIELD
(Hz) (lines) (lines) (lines) (lines)

15.734 1716 Negitive 27 1440 124 114

59.94Hz 720x480i 59.94 525 Negitive 480 3 15
31,469 858 Negitive 27 720 62 60
59.94Hz 720x480P 59.94 525 Negitive 480 6 30
45 1650 Positive 74.25 1280 40 220
60Hz 1280x720P 60 750 Positive 720 5 20
33.75 2200 Positive 74.25 1920 44 148
60Hz 1920X1080i 60 1125 Positive 1080 5 15
67.5 2200 Positive 148.5 1920 44 148
60Hz 1920X1080P 60 1125 Positive 1080 5 36

Downloaded from www.Manualslib.com manuals search engine

 6-4 HDMI terminal
Input HDMI signal (VG859 signal generator), separately input the signals listed in table6 and check the display and
sound (32 KHz, 44.1 KHz, 48 KHz) at any situation (power on, channel switch and format convert, etc.)

Table6 HDMI signal format

HDMI
1/2/
SYNC PIXEL SYNC BACK
DVI FREQ FREQ PERIOD Display
Timing POLARITY CLOCK WIDTH PORCH
Table

LINE (pixel) LINE (pixel) LINE (pixel)

LINE(kHz) LINE (pixel) LINE
MODE (MHz) FRAME FRAME FRAME
FRAME(Hz) FIELD(lines) FIELD
(lines) (lines) (lines)

31.47 800 Negitive 25.175 640 96 48

640x480 59.94 525 Negitive 480 2 33
37.88 1056 Positive 40 800 128 88
800x600 60.32 628 Positive 600 4 23
48.36 1344 Negitive 65 1024 136 160
1024x768 60 806 Negitive 768 6 29
47.4 1440 Positive 68.25 1280 32 80
1280x768 (1280cvt) 59.99 790 Negitive 768 7 12
47.78 1664 Negitive 79.5 1280 128 192
1280x768 59.87 798 Positive 768 7 20
63.98 1688 Positive 108 1280 112 248
1280x1024 60.02 1066 Positive 1024 3 38
47.71 1792 Positive 85.5 1360 112 256
1360x768 60.02 795 Positive 768 6 18
47.71 1792 Positive 85.5 1366 112 256
1366x768 59.79 795 Positive 768 6 18
67.5 2200 Positive 148.5 1920 44 148
1920x1080 60 1125 Positive 1080 5 36
15.73 1716 Negitive 27 1440 124 114
59.94Hz 1440x480i 59.94 262.5 Negitive 480 3 15
31.47 858 Negitive 27 720 62 60
59.94Hz 720x480P 59.94 525 Negitive 480 6 30
45 1650 Positive 74.25 1280 40 220
60Hz 1280x720P 60 750 Positive 720 5 20
33.75 2200 Positive 74.25 1920 44 148
60Hz 1920X1080i 60 562.5 Positive 1080 5 15
27 2750 Positive 74.25 1920 44 148
24Hz 1920x1080P 24 1125 Positive 1080 5 36
33.75 2200 Positive 74.25 1920 44 148
30Hz 1920x1080P 30 1125 Positive 1080 5 36
67.5 2200 Positive 148.5 1920 44 148
60Hz 1920X1080P 60 1125 Positive 1080 5 36

10

Downloaded from www.Manualslib.com manuals search engine

 6-5 other functions check
a) Check the sleep timer, picture/sound mode, OSD, stereo and analog TV Teletext, etc.

(7) Firmware update process

(1) Plug the USB with the firmware file named upgrade_2013_NA_60.pkg
(2) If system detect upgrade_2013_NA_60.pkg, USB upgrade message would appear automatically.
(3) Press Up key to select Yes, and then press OK key to start the upgrading.

(4) Upgrading is starting, please wait for the progress finish.

(5) When the progress completed, please follow the instruction to remove USB and restart Power off
then on.

11

Downloaded from www.Manualslib.com manuals search engine

 Working principle analysis of the unit
1. NTSC signals flow:
Antenna signal will be send to tuner TDST-H021F, t h e n T u n e r w i l l b e demodulating and
output standard video signal TV-CVBS, and sound SIF signal.
TV-CVBS will send to the master control IC MT5385 to video decode, de-interlace and scaler, then
output LVDS level drive for panel display.
The sound IF (SIF) will be fed into MT5385, after demodulating, pre-amplifying, bass adjusting and
volume control, the sound signal w i l l b e t r a n s f o r m i n t o d i g i t a l I 2 S s i g n a l and sent to
digital amplifier TAS5707.

2. Composite/Component signal flow

Composite signal and Component signal will be fed to MT5385 to perform video decode, de-
interlace and scaler, then output LVDS drive level for panel display.
Audio signal from Composite/Component terminal via matched resistance is fed to MT5385 to bass
adjust and volume control, the sound signal will b e t r a n s f o r m i n t o d i g i t a l I 2 S s i g n a l and sent
to digital amplifier TAS5707.

3. HDMI signal flow

Two HDMI video signals are directly fed to the master control IC MT5385 to digital decode, image
scale, then output LVDS drive level for panel display. HDMI audio signal via decoder built-in MT5385 to
bass adjust and volume control, the sound signal will b e t r a n s f o r m i n t o d i g i t a l I 2 S s i g n a l and
sent to digital amplifier TAS5707.

4. USB signal flow

USB signal via USB connector sent to MT5385 and its A/D conversion to YPbPr output for
MT5385, then output R/G/B of 24 bit to back end module to Video decode, de-interlace and
image scale, then send to LVDS level drive for panel display.
Sound signal of USB signal v i a matched resistance a n d sent to MT5385 to bass adjust and
volume control, the sound signal will b e t r a n s f o r m i n t o d i g i t a l I 2 S s i g n a l and sent to digital
amplifier TAS5707.
5. SPDIF signal flow
The master control IC MT5385 will transfer digital sound signal out by format Dobly Digital or PCM.

12

Downloaded from www.Manualslib.com manuals search engine

 4. Specifications

13

Downloaded from www.Manualslib.com manuals search engine

 SPE32T 32” Block Diagram
5-1 Block Diagram
EE:
A70 60Hz Models by WXGA :2x10
MTK MT5835 Platform Full-HD :2x20
Panel out
R_out

Audio
AMP
TAS5707
L_out

DDR3 1G-1600
H5TQ1G63DFR-PBC

Audio I2S output

Flash 16MB DTV system IC
MX25L12845EMI-10G

MTK

MT5385 Keypad
EEPROM 64KB
IF +/- 24C32

CVBS/Y Pb Pr Crystal
& Audio R/L 27MHz IR

Enable

ARC
Buffer IR / LED-R
Board
Y

Pb
S/PDIF
Pr USB
Tuner
LG L
TDST-
H021F
R

ANT / COLOR STREAM HD

CABLE & COMPOSITE IN SPDIF HDMI 1 HDMI 2
& Audio R/L in OUT

14

Downloaded from www.Manualslib.com manuals search engine

 Power board:FSP

15

Downloaded from www.Manualslib.com manuals search engine

 Power board:DARFON

16

Downloaded from www.Manualslib.com manuals search engine

 IC block diagram

1. MT5385
GENERAL FEATURE LIST
Host CPU
 ARM11 single core 700MHz
 Floating Point Unit
 16K I-Cache and 16K D-Cache for ARM11 core
 128K L2 Cache
 Boot ROM
 Boot from serial flash, NAND flash
 Supports security boot
 JTAG ICE interface
 Watch Dog timers
General Copy Protection Unit
 Supports CPPM/CPRM
 Supports AES with 128/192/256 bit key
 Supports AACS
 Supports DES/3DES
 Supports SHA-1/224/256
 Supports MD5
 Supports CSS
 Supports RC4
 Random number generator
MPEG1 Decoder
MPEG2 Decoder
 MPEG MP@ML, MP@HL
 Supports de-blocking filter
 Full-HD 30P dual decoder
MPEG4 Decoder (option)
 ASP@L5
 Full-HD 30P dual decoder
H.264 (MPEG4.10 / AVC) HD Decoder (option)
 MP@L4.0, HP@L4.0, constrained BP@L3 video standard
 Full-HD 30P dual decoder
VC-1 (SMPTE421M) Decoder (option)
 MP@HL, AP@L3
 WMV9 decoder MP@HL
 Full-HD 30P dual decoder
DivX (XviD) Decoder (option)
17

Downloaded from www.Manualslib.com manuals search engine

  DIVX3 / DIVX4 / DIVX5 / DIVX6 / DIVX HD
 Full-HD 30P dual decoder
AVS Decoder (option)
 Jizhun profile @Level 6.2 (supports 4:2:0 format)
 Full-HD 30P dual decoder
RMVB Decoder (option)
 RealVideo8/9/10
 Full-HD 30P dual decoder
VP6 Decoder (option)
VP8 Decoder (option)
 Supports 3D side-by-side Full-HD contents
 Full-HD 30P dual decoder

MVC
 H.264 stereo high profile Full-HD 60fps
Still Image decoding
 JPEG decoder (base-line or progressive), hardware accelerator
 BMP/PNG/JIF decoder
De-mosquito engine
 For all AV inputs
2D Graphics
 Supports multiple color modes
 Point, horizontal/vertical line primitive drawings
 Rectangle fill and gradient fill functions
 Bitblt with transparent options
 Alpha blending and optional pre-multiplied alpha composition Bitblt
 Stretch Bitblt
 YCbCr to RGB color space conversion
 Supports index to direct mode bitblt
Image Resizer
 Supports 16bpp/32bpp direct color format
 Supports 420/422 video format
 Supports 420/422/444 JPEG format
 Arbitrary ratio vertical/horizontal scaling of video, from 1/128X to 128X
 Simple DMA
 Supports MMU in OSD mode
OSD Plane
 Three linking list OSDs with multiple color mode and all of them have
up-scaler
 Supports stereo OSD
18

Downloaded from www.Manualslib.com manuals search engine

 Video Plane
 Supports video freeze and over scan
 Flesh tone management
 Gamma correction
 Color Transient Improvement (CTI)
 2D Peaking
 Saturation/hue adjustment
 Brightness and contrast adjustment
 Black and White level extender
 Adaptive Luma management
 Automatic detect video, film and mixed-mode source
 3:2/2:2 pull down source detection
 Supports FHD motion-adaptive de-interlace
 Supports excellent low angle image processing
 Brilliant boundary shaping for moving object
 Advanced non-linear panorama scaling
 Programmable zoom viewer
 Progressive scan output
 Supports alpha blending for OSD on video plane
 Dithering processing for flat panel display
 Frame rate conversion
 Supports FHD panel and VGA dot-to-dot
 Supports PIP/POP, (dual de-interlace, one HD and one SD)
OD (option)
 Supports 60Hz Full-HD and WXGA panel over drive
TCON (option)
 Flexible timing control with programmable timing
 Horizontal timing control
 Vertical timing control
 Multi-line timing control
 Multi-frame timing control
 Supports gate power modulation timing
 Supports command-based timing
 Supports POL inversion every 30 seconds
 Supports 1/2/4/8 frame inversion, 1-line inversion, 2-line inversion,
and could up to 255-line dot inversion
Local Dimming
 Block division: up to 800 total blocks, up to 100 horizontal blocks
 Supports 50K ~ 50M SPI clock rate
LVDS
19

Downloaded from www.Manualslib.com manuals search engine

  Supports 6/8/10-bit one-link, 6/8/10-bit dual-link LVDS transmitter
 Built-in spread spectrum for EMI performance
 Programmable panel timing output
Mini-LVDS
 Dual port 8-bit 6 pairs mini-LVDS output

CVBS In
 On-chip 54 MHz 10-bit video ADC
 Supports PAL (B,G,D,H,M,N,I,Nc), NTSC, NTSC-4.43, SECAM
 NTSC/PAL supports 3D/2D comb filter
 Built-in motion-adaptive 3D Noise Reduction
 VBI data slicer for CC/TT decoding
 Supports 1 S-Video
 Supports 2 1-channel CVBS
 Supports SCART connector
VGA In
 Supports VGA input up to UXGA 162 MHz
 Supports full VESA standards
Component Video In
 Supports 2 component video inputs
 Supports 480i / 480p / 576i / 576p / 720p / 1080i / 1080p
Audio ADC
 Supports 3 pair L/R input
Audio digital input
 Supports 1 bit (2 channel) I
2
S audio input
HDMI Receiver
 Two channel HDMI1.4a
 Maximum data rate can be up to 3.3 GHz
 Audio return channel
 EIA/CEA-861B
 CEC
Video bypass
 ATV bypass
 CVBS Monitor (any AV or S-video input)
TV audio demodulator
 Supports BTSC / EIA-J / A2 / NICAM / PAL FM / SECAM world-wide
formats
 Standard automatic detection
20

Downloaded from www.Manualslib.com manuals search engine

  Stereo demodulation, SAP demodulation
 Mode selection (Main/SAP/Stereo)
Audio DAC
 Supports 2-pair audio DACs
DRAM Controller
 16-bit DDR2/DDR3 interface
 Supports DDR2 1066Mhz, DDR3 1333Mhz
 Supports 512Mb or 1Gb or 2Gb DDR2 and DDR3 DRAM device
 Supports DDR2-1066/DDR3-1333/DDR3-1600 device
Audio DSP
 Supports AC-3 (Dolby Digital) decoding (ATSC) and E-AC3 (Dolby
Digital Plus) decoding (option)
 MPEG-1 layer I/II decoding
 Supports WMA / HE-AAC (option)
 Support Dolby DDCO, and MS10 (option)
 Dolby Prologic II (option)
 Audio output: 5.1ch + 2ch (down mix) + 2ch(bypass)
 Pink noise and white noise generator
 Equalizer
 Bass management
 3D surround processing with virtual surround
 Audio and video lip synchronization
 Supports bass/treble
 Automatic volume control
 Supports 5-bit (10-channel) main audio I
2
S output interface, each of these channels is up to 24-bit resolution
S/PDIF interface
 Supports SPDIF in bypass
 SPDIF out
Analog TV IF Demodulator
 Supports world-wide analog TV standard
 Accept direct IF and low IF
 Full digital AGC control and carrier recovery
 Embedded SAW filter and IF Amplifier. Cost effective TV front-end
structure and no more cost on:
 External analog SAW filters (Video/Audio)
 External analog IF demodulator
 External peripheral circuit on CVBS signal data path
 External SAW filter and IF VGA on tuner
21

Downloaded from www.Manualslib.com manuals search engine

 Digital TV (ATSC / Open-Cable) Demodulator
 Compliant with ATSC digital television standard
 Supports SCTE DVS-031 and ITU J.83 Annex B digital CATV standard
 Accept direct IF (44 MHz or 43.75 MHz) and low IF (5.38 MHz)
 NTSC interference rejection capability
 Meet all ATSC/A74 requirements
 Excellent adjacent and co-channel rejection capability
 Dual digital AGC controls for IF and RF, respectively
 Full-digital frequency offset recovery with wide acquisition
range 500KHz for ATSC and 250 kHz for CATV
reception
 EIA/CEA-909 antenna interface, both mode A and mode B are
supported
 Embedded SAW filter and IF Amplifier. Cost effective TV front-end
structure and no more cost on:
 External analog IF demodulator
 External SAW filter and IF VGA on tuner
Peripherals
 Seven basic serial interfaces: one is for the tuner, three are the masters
for general purpose and two of them can
be active in standby mode, one is the slave for VGA DDC, the
other two extra slave serial interfaces used for
HDMI EDID data
 Five PWMs, two of them can be active in standby mode
 IR receiver
 Real-time clock and watchdog controller
 Built-in 2-link USB2.0/1.1, both of them support external hub with 16
endpoints.
 Built-in uP for standby mode
 Supports SDIO interface
 Supports smart card interface
 Supports two serial flash or one serial and one NAND flash
 Supports 2-input low-speed ADC
 Supports boundary scan (JTAG)
IC Outline
 LQFP Package 216 pins with E-pad
 3.3V/1.2V and 1.8V for DDR2 or 1.5V for DDR3

22

Downloaded from www.Manualslib.com manuals search engine

 2. TI TAS5707
20-W STEREO DIGITAL AUDIO POWER AMPLIFIER WITH EQ AND DRC

23

Downloaded from www.Manualslib.com manuals search engine

 SPE32T 32-inch Wiring Diagram
7-1 BLOCK

24

Downloaded from www.Manualslib.com manuals search engine

 7-2 Wiring Connection
CMI panel
Main board to Panel Main board to Speaker
SPE32T SPE32T
DC02L00700I DC02A00130I
280 mm L:280 & R:480 mm
Panel side Main board CN1 Main board CN4 Speaker
P-TWO
LVDS cable JWT A2006WR0-2X10P JWT A2001WR2-4P Color Right
187053-30091
1 VCC Red 1 LVDS_PWR 1 SPK_OUTL+ Red P3 Speaker +
2 VCC Red 2 LVDS_PWR 2 SPK_OUTL- Black P2 Speaker -
3 VCC NC Left
4 VCC NC 3 SPK_OUTR- Green P5 Speaker -
5 GND NC 4 SPK_OUTR+ White P4 Speaker +
6 GND NC
7 GND NC
8 GND NC Main board to IR board/ Key
9 SELLVDS Yellow 8 LVVDS_SEL SPE32T
10 NC NC DC02V04140I
11 GND NC IR:450 mm & Key:750mm
12 RX0- Yellow 20 LVDS_D0O_N IR board CN1 Main board CN3
13 RX0+ White 19 LVDS_D0O_P JWT A2001WR2-11P Color JWT A2001WR2-5P
14 GND NC 1 VCC3V3_STB Red 1 VCC5_0_STB
15 RX1- Red 18 LVDS_D1O_N 2 IRR White 2 IRR

25

Downloaded from www.Manualslib.com manuals search engine

 16 RX1+ White 17 LVDS_D1O_P 3 GND Black 3 GND
17 GND Black 5 GND 4 LED_G Orange 4 LEDG
18 RX2- Orange 16 LVDS_D2O_N NC 5 LEDR
19 RX2+ White 15 LVDS_D2O_P NC 6 Light_S_C
20 GND Black 6 GND NC 7 Light_S_D
21 RXCLK- Brown 14 LVDS_CO_N 1 GND Black 8 GND
22 RXCLK+ White 13 LVDS_CO_P 2 Power Red 9 Power Key
23 GND Black 7 GND 3 SAR0 Orange 10 SAR0
24 RX3- Black 12 LVDS_D03_N 4 SAR1 Yellow 11 SAR1
25 RX3+ White 11 LVDS_D03_P
26 GND NC
27 NC NC
28 NC NC
29 NC NC
30 GND NC

26

Downloaded from www.Manualslib.com manuals search engine

 Main board to Power board:

27

Downloaded from www.Manualslib.com manuals search engine

 8. Trouble shooting
1. Fault clearance
Before calling your dealer or service center for assistance, check the matters below once again.
(1) Make sure you have connected LED TV to your equipment as described in the section
“ CONNECTING LED TV”.
(2) Check cable connection. Verify that all external equipment and power cord are properly
connected.
(3) Verify that all power is switched on.
(4) If LED TV still does not produce an image, re-start the external equipment.
(5) If the image still does not appear, unplug LED TV from the external equipment and check the
external equipment. The problem may be with your graphics controller rather than with LED TV.
(When you reconnect LED TV, remember to turn the external equipment and TV off before you
power up LED TV. Power the equipment back on in order of LED TV and external equipment.)
(6) If the problem still exists, check the following chart.

Problem Try these Solutions

NO POWER
Plug this LED TV into the AC outlet.

Press POWER button on side control or on Remote Control to turn on LED TV.

Check POWER Indicator. If this indicator blank, this TV has getting trouble.
Remote
Check the batteries.
Control does
Make sure nothing is between the Remote Receiver and the Remote Control.
not work
Make sure you are not too far from LED TV when using Remote Control.

Maximum operating range is 5m.

Is direct sunlight or strong artificial light shining on LED TV‘s Infrared Remote
Receiver? Eliminate the light by closing curtains, pointing the light in a different
direction, etc.
No image
Check the connection between the external equipment and LED TV.

When turning LED TV on, it takes within 7 seconds (ATV mode) to display the
image.

Check the system that you select is corresponding with the external equipment
or the video equipment.

Make sure the temperature is not out of the Operating Temperature (0°C ~
40°C).

Turn off power, then turn on again, re-start LED TV.
No sound
Check Audio cable connection from Audio input source.

Adjust the Sound System.

Press VOLUME (+) button.

Press MUTE button.
There are tiny
Dark or bright points of light (red, green, or blue) may appear on the screen.
black points This is a characteristic of the LED panel, not a malfunction of the LED TV.
and/or bright
LED panel is produced with very high accuracy technology. There is 99.99% or
more dot pixel, but there is also 0.01 % or less of dot pixel lack or dot pixel that
point on the TV
is constantly lighted. This is not defect.

Regarding LED panel characteristic, it may occur picture remain (look like a
mirror) when the screen is changed if it displays same screen for a long time.
Changing the picture or turn-off the power supply may recover.

Stripe pattern (more, interference stripes) may show up on the screen depends
on the reflected picture.
Abnormal
Adjust the value of color.
color of image
Select different color system.
28

Downloaded from www.Manualslib.com manuals search engine

 2. Troubleshooting guide
The flow chart shown below will help you to troubleshoot your Televison set with it doesn’t display
normally. Each procedure offers a simple way to check for system errors. Before starting, ensure
that there is a signal in and that the Televison is turned on.

2-1 Power LED no light

29

Downloaded from www.Manualslib.com manuals search engine

 2-2 Has audio but no video out

2-3 Has video but no audio out step 1

30

Downloaded from www.Manualslib.com manuals search engine

 2-4 Has video but no audio out step 2

31

Downloaded from www.Manualslib.com manuals search engine

 9.SCHEMATIC DIAGRAM
--ELECTRON

Downloaded from www.Manualslib.com manuals search engine

 5 4 3 2 1

PCB1
MT5385 Power Tree

(12V) AMP_VCC
For AMP

D D
+12V FB20
Q15 SOT-23B U14 SOP8
LMBT3904LT1G DMG4435SSS FB21 LVDS_PWR
5V_SW FB22 (LVDS_PWR_EN) For Panel

(NC) (Option)

(1.2V)
+5VSB U1 SOP8-T5
FB1 AX3518ESA FB2 VCCK
POWER_EN
VTV-L32616 REV:1 (About 3.2A)

FW1 U2
(3.3V)
FB3 AX1007E33A FB4 3V3SB
FIRMWARE
SOT-223
FW L32616 R39 AVDD33_XTAL_STB

C
E1 R41 AVDD33_REG_STB
C

(5V)
Q2 SOT-23B Q1 SOT-23GDS
LMBT3904LT1G DMP2160U FB5 5V_SW FB17 +5V_USB0
+5V_USB0 => About 500mA
VCCK For USB

EMIcover-50x68m m /NC (3.295V) (3.295V) (1.2V)

U3 U5
FB6 AX1117ADA DVDD3V3 R8 AVDD3V3 FB7 AX1007E12A FB10 AVDD1V2
TO-252 SOT-223
R9 R30 AVDD12_RGB
(NC) (Option) R21 AVDD33_MEMPLL
R31 AVDD12_DEMOD
R29 AVDD33_DEMOD
R28 AVDD1V2_HDMI1
R24 AVDD3V3_HDMI1

R39 AVDD33_PLLGP
B B

R15 ADAC_3V3 R20 AVDD33_DAC

FB11 AVDD33_AADC

(1.5V)
U4
FB8 AX1117ADA FB9 DDRV
TO-252 For DDR3 Power

(3.3V)
U13
FB19 AX1117AD33A +3.3V_TUNER FB18 +3.3V_TUNER_1
(About 330mA)
TO-252 For Tuner

A A

COMPAL OPTOELECTRONICS CO., LTD

Title
SCHEMATIC,M/B VTV-L32616
Size Docum ent Num ber Rev
XXXXXX 1
Date: Tues day, Novem ber 27, 2012 Sheet 1 of 11
5 4 3 2 1

Downloaded from www.Manualslib.com manuals search engine

 5 4 3 2 1

Buck Converter 4A
(1.2V)
+5VSB 11 POWER_EN

+3.3V_Standby power (3V3SB)

VCCK
FB1 L1
CLS UPB201212T-121Y-N 5A U1 AX3518ESA SCD0403T-2R2M 2.2uH/3.8A FB2
8 7
100mA
R1 R2 VIN LX CLS UPB201212T-121Y-N 5A U2 3V3SB
10/1% 10/1% C2 15pF/50V/0402 C1 +5VSB AX1007E33A
D D
1 RA FB4
THEM_PAD

VCC 4 0.1uF/10V/0402 FB3 3 2

FB R3 332K/1% CLS UPB201212T-121Y-N 5A VIN VOUT 4 CLS UPB201212T-121Y-N 5A
PGND

C3 + C4 5 2 VOUT
GND

EN REF R4 634K/1%
ELNA SE100uF/16V 0.1uF/10V/0402 C5 GND/ADJ R5
RB
R6 RA 249/1%/NC
6
3
9

C6 C7 22uF/6.3V/0805 1
100K/1% C8 + C9 + C10 C11 C12
0.1uF/10V/0402 0.1uF/10V/0402
10uF/16V/0805 0.1uF/10V/0402 4.7uF/6.3V
0.1uF/10V/0402
C13 RB R7 ELNA SE100uF/16V/NC
0
10uF/6.3V/NC
Vout=0.8Vx (1+RA/RB)

+5V_Nomal power (5V_SW)

5V_SW
+5VSB
U16 FB5
1 8
S1 D4
+3.3V_Digital power (DVDD3V3)
C 2 7 CLS UPB201212T-121Y-N 5A C
3 S2 D3 6
S3 D2 (3.295V)
4 5 C16
G D1 + C15 C17
C14 R10 DMG4435SSS/NC 0.1uF/10V/0402 4.7uF/16V/0805
400mA U3 DVDD3V3 AVDD3V3
5V_SW AX1117ADA
0.1uF/10V/0402/NC 47K/1% ELNA SE100uF/16V
Q1 FB6 3 2 R8 0/1%/0805
S D CLS UPB201212T-121Y-N 5A VIN VOUT
R9 0/1%/0805/NC
VCCK
DMP2160U ADJ / GND R11
G

Strapping mode :Must RA 110/1%

1
default Pull low.
C

R12 B Q2 C20 + C18 + C21 C19 C22

100K/1% C24 10uF/16V/0805 0.1uF/10V/0402 10uF/10V/0805

E

POWER_EN : 1uF/6.3V/0402
LMBT3904LT1G 3/1 ,3/2 Modify C23 RB R13
180/1%
0.1uF/10V/0402
ELNA SE100uF/16V/NC
High => 1.2V_SW POWER ON 10uF/6.3V/NC
Low => 1.2V_SW POWER OFF

VO=1.25Vx(1+RB/RA)+IadjxR2

B B

+1.5V_DDR3 power (DDRV) (1.5V) +3.3V_Analog power (ADAC_3V3) +1.2V_Analog power (AVDD1V2) (1.2V)

DDRV
100mA
U4 (3.295V) U5 AVDD1V2
5V_SW AX1117ADA AVDD3V3 AX1007E12A 2/20 Modify
FB9 FB10
FB8 3 2 AVDD3V3 ADAC_3V3 FB7 3 2
CLS UPB201212T-121Y-N 5A VIN VOUT CLS UPB201212T-121Y-N 5A CLS UPB201212T-121Y-N 5A VIN VOUT 4 CLS UPB201212T-121Y-N 5A
VOUT
R15 0/1%/0805
ADJ / GND R14 GND/ADJ
RA 110/1%
1 1
C30
C27 + C25 C26 C28 + C29 1/31 Delete C31 + C32 C33 C34

10uF/16V/0805 0.1uF/10V/0402 10uF/10V/0805 ELNA SE100uF/16V/NC 1uF/16V 10uF/16V/0805 0.1uF/10V/0402 4.7uF/6.3V 0.1uF/10V/0402
C35 RB R16 0.1uF/10V/0402
22/1%
10uF/6.3V/NC

VO=1.25Vx(1+RB/RA)+IadjxRB
A A

COMPAL OPTOELECTRONICS CO., LTD

Title
SCHEMATIC,M/B VTV-L32616
Size Document Number Rev
XXXXXX 1
Date: Tuesday, November 27, 2012 Sheet 2 of 11
5 4 3 2 1

Downloaded from www.Manualslib.com manuals search engine

 5 4 3 2 1

AOSDATA0_1 R17 AOSDATA0

33/0402
AVDD3V3 C36

Analog Normal Power

AMP_BCK_1 R18 AMP_BCK
Add R99 33/0402 22pF/50V/0402 ADAC_3V3
reserve for (Pin65)
LED_G

C38
C37 LED flash AMP_LRCLK_1 R19 AMP_LRCLK AVDD3V3 R20 AVDD33_DAC
AC Drop_DET

AVDD1V2 0.1uF/10V/0402 when AC-ON 33/0402 22pF/50V/0402 (Pin136) 0/0402

C39 R21 AVDD33_MEMPLL +
AMP_MCK_1 R22 AMP_MCK 0/0402 C41 C40
33/0402 22pF/50V/0402 10nF/50V/0402
C42 C45 C43 C44 10uF/10V
AVDD3V3 0.1uF/10V/0402 0.1uF/10V/0402
R23 R99 R104 22pF/50V/0402 10nF/50V/0402
AVDD1V2 100/0402
100/0402 100/0402/NC
C46 ADAC_3V3
DVDD3V3

0.1uF/10V/0402 (Pin57)
VCCK

VMID_AADC AVDD3V3 FB11 AVDD33_AADC

(Pin199) YPbPr 0
SDA_TUNER

D D
SCL_TUNER
DVDD3V3

SBK160808T-800Y 0.4A
VCCK

C47 C48 R24 AVDD3V3_HDMI1

0/0402 C49 C50 SOY0
SOY0 6
E-Fuse 0.1uF/10V/0402 4.7uF/6.3V Y0P
Y0P 6
1uF/6.3V/0402 C51 0.1uF/10V/0402 COM0
AVDD33_XTAL_STB

COM0 6
R25 0/0402/NC

R26 0/0402/NC

0.1uF/10V/0402 PB0P
AMP_LRCLK_1
SDA_SYSTEM
SCL_SYSTEM

AOSDATA0_1
ARC_SELECT

PB0P 6
LVDS_PWR_EN

PANEL SLET

(Pin108)
YPbPr_R_In0
BL_DIMMING

AMP_MCK_1

AVDD33_AADC
SYS EE_WP

AMP_BCK_1

PR0P
YPbPr_L_In0

For improve Audio AADC

SPDIF_OUT

AVDD33_DAC

PR0P 6
PSRC_WR
UART_Det

R27 PSRC_WR performance

IFAGC
BL_ON/OFF
POCE0#
POOE#

4.7K/1%/0402
PACLE

PDD7
CP_C

PDD6
PDD5
PDD4

PDD2
PDD1
PDD0

AVDD1V2
(Pin216) AVDD3V3
R28 AVDD1V2_HDMI1 (Pin51)
0/0402 R29 AVDD33_DEMOD Demod IF
108
107
106
105
104
103
102
101
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55

C52 0/0402
U6 0.1uF/10V/0402 C53 FAT_IN-
FAT_IN- 10
0.1uF/10V/0402 FAT_IN+
SCL_SYSTEM
SDA_SYSTEM

DEMOD_RST
PAALE
PACLE

VCCK

DEMOD_TSCLK

AOBCK
AOLRCK
AOMCLK

VCCK
AVDD12_LVDSA

AVDD33_XTAL_STB
GPIO2
GPIO1
GPIO0

GPIO3

FSRC_WR

RF_AGC
IF_AGC

AIN2_L_AADC
DEMOD_TSSYNC

AR1_ADAC
AR0_ADAC
AL1_ADAC
AL0_ADAC

AIN2_R_AADC
AIN1_L_AADC
AIN0_L_AADC
AIN1_R_AADC
AIN0_R_AADC
AVDD33_DAC
AVSS33_DAC

AVDD33_AADC
VMID_AADC
VCC3IO
POWE_

POCE0_
POOE_
PARB_
PDD7
PDD6
PDD5
PDD4
PDD3
PDD2
PDD1
PDD0
POCE1_

VCC3IO

AOSDATA0
DEMOD_TSDATA0

DEMOD_TSVAL

ASPDIFO0

FAT_IN+ 10

CVBS
AVDD1V2
(Pin36) AVDD1V2
R30 AVDD12_RGB (Pin195)
0/0402 R31 AVDD12_DEMOD CVBS0P
109 54 CVBS0P 6
TX_AE4P OXTALO C54 0/0402
TX_AE4N 110 AE4P XTALO 53 OXTALI 0.1uF/10V/0402 C55
TX_AE3P 111 AE4N XTALI 52 0.1uF/10V/0402
TX_AE3N 112 AE3P AVSS33_DEMOD 51 AVDD33_DEMOD
TX_AECKP 113 AE3N AVDD33_DEMOD 50 FAT_IN-
TX_AECKN 114 AECKP ADCINN_DEMOD 49 FAT_IN+ AVDD3V3 AVDD3V3
TX_AE2P 115 AECKN ADCINP_DEMOD 48 (Pin43)
TX_AE2N 116 AE2P AVSS12_DEMOD 47 AVDD12_DEMOD (Pin121)
TX_AE1P 117 AE2N AVDD12_DEMOD 46 CVBS0P
TX_AE1N 118 AE1P CVBS0P 45 C56 C58 C57
AE1N SY
TX_AE0P 119
120 AE0P SC
44
43
0.1uF/10V/0402 0.1uF/10V/0402 LVDS out
TX_AE0N 1uF/6.3V/0402/NC
AE0N AVDD33_CVBS AVDD3V3
121 42 TX_AE0P
AVDD3V3 AVDD33_LVDSA AVSS33_CVBS TX_AE0P 7
TX_AO4P 122 41 AVDD33_PLLGP TX_AE0N
TX_AO4N 123 AO4P AVDD33_PLLGP 40 TX_AE1P TX_AE0N 7
VCCK AVDD3V3 AVDD3V3
124 AO4N VCCK 39 (Pin38) TX_AE1P 7
TX_AO3P R32 0/0402/NC TX_AE1N
TX_AO3N 125 AO3P VDACX_OUT 38 (Pin106) TX_AE2P TX_AE1N 7
AO3N AVDD33_VDAC AVDD3V3 TX_AE2P 7
TX_AOCKP 126 37 TX_AE2N
TX_AOCKN 127 AOCKP AVSS12_RGB 36 AVDD12_RGB C60 C61 TX_AECKP TX_AE2N 7
TX_AO2P 128 AOCKN AVDD12_RGB 35 PR0P TX_AECKN TX_AECKP 7
C59 0.1uF/10V/0402
C 129 AO2P PRP 34 TX_AECKN 7 C
TX_AO2N PB0P 0.1uF/10V/0402 0.1uF/10V/0402/NC TX_AE3P
TX_AO1P 130 AO2N PBP 33 COM0 TX_AE3N TX_AE3P 7
TX_AO1N 131 AO1P COM 32 Y0P TX_AE4P TX_AE3N 7
TX_AO0P 132 AO1N YP 31 SOY0 TX_AE4N TX_AE4P 7
TX_AO0N 133 AO0P SOY 30 TX_AE4N 7
VCCK 134 AO0N MT5385 RP 29

Standby Power
VCCK 135 VCCK COM 28
VCCK GP
AVDD33_MEMPLL 136
137 AVDD33_MEMPLL SOG
27
26
DRAM TX_AO0P
TX_AO0P 7
1_CKE 3V3SB TX_AO0N
1_A10 138 RCKE BP 25 RDQ0 TX_AO1P TX_AO0N 7
R33
139 RA10 HSYNC 24 RDQ0 8 TX_AO1P 7
1_BA1 AVDD33_XTAL_STB RDQ1 TX_AO1N
1_A4 140 RBA1 VSYNC 23 AVDD33_REG_STB (Pin55) RDQ2 RDQ1 8 TX_AO2P TX_AO1N 7
1_A1 141 RA4 AVDD33_VGA_STB 22 AVDD10_LDO RDQ3 RDQ2 8 TX_AO2N TX_AO2P 7
0/0402 +
1_A6 142 RA1 AVDD10_LDO 21 ORESET# C62 C64 RDQ4 RDQ3 8 TX_AOCKP TX_AO2N 7
1_A8 143 RA6 ORESET_ 20 ADIN0 RDQ5 RDQ4 8 TX_AOCKN TX_AOCKP 7
C63 10uF/6.3V/NC 0.1uF/10V/0402
144 RA8 ADIN0_SRV 19 RDQ5 8 TX_AOCKN 7
1_A11 SAR0 4.7uF/6.3V 3V3SB RDQ6 TX_AO3P
1_A12 145 RA11 ADIN1_SRV 18 RDQ7 RDQ6 8 TX_AO3N TX_AO3P 7
VCCK R34
1_RAS# 146 RA12 VCCK 17 OPWRSB AVDD33_REG_STB RDQ8 RDQ7 8 TX_AO4P TX_AO3N 7
1_CAS# 147 RRAS_ OPWRSB 16 OIRI (Pin23) RDQ9 RDQ8 8 TX_AO4N TX_AO4P 7
DDRV 148 RCAS_ OIRI 15 U0TX RDQ10 RDQ9 8 TX_AO4N 7
0/0402 C65
149 VCC2IO U0TX 14 RDQ10 8
1_WE# U0RX 3V3SB 0.1uF/10V/0402 RDQ11
1_A0 150 RWE_ U0RX 13 RDQ12 RDQ11 8
1_A13 151 RA0 VGA_SDA 12 RDQ13 RDQ12 8 BL_DIMMING
1_A9 152 RA13 VGA_SCL 11 Power Key (Pin8) RDQ14 RDQ13 8 BL_DIMMING 11
RA9 OPCTRL2 RDQ14 8
1_RST#
1_A7
153
154 RRESET_ OPCTRL1
10
9
AMP_MUTE
OPCTRL0
(OPCTRL1)
R35 0/0402/NC LED_R
C66
0.1uF/10V/0402
RDQ15
RDQS1
RDQ15 8 USB
1_A2 155 RA7 OPCTRL0 8 RDQS1# RDQS1 8 USB_DM0
156 RA2 VCC3IO_STB 7 3V3SB RDQS1# 8 USB_DM0 7
1_A5 HDMI_HPD0 RDQS0 USB_DP0
1_A3 157 RA5 HDMI_0_HPD 6 HDMI_SDA0 RDQS0# RDQS0 8 USB_DP0 7
RA3 HDMI_0_SDA RDQS0# 8
1_BA2 158
159 RBA2 HDMI_0_SCL
5
4
HDMI_SCL0 HDMI RDQM1
RDQM1 8
1_BA0 HDMI_HPD1 RDQM0
1_CS# 160 RBA0 HDMI_1_HPD 3 HDMI_SDA1 HDMI_CEC 1_A0 RDQM0 8
HDMI_CEC 9
AVDD33_HDMI_1_RX

AVDD12_HDMI_1_RX

RCS_ HDMI_1_SDA 1_A0 8

1_ODT 161
162 RODT HDMI_1_SCL
2
1
HDMI_SCL1 RX0_2
RX0_2 9
1_A1
1_A1 8 NAND/Nor Flash
RDQ4 HDMI_CEC RX0_2B 1_A2
RDQ4 HDMI_CEC RX0_2B 9 1_A2 8
GPIO RX0_1 1_A3
HDMI_0_RX_CB

HDMI_1_RX_CB
HDMI_0_RX_0B

HDMI_0_RX_1B

HDMI_0_RX_2B

HDMI_1_RX_0B

HDMI_1_RX_1B

HDMI_1_RX_2B

RX0_1 9 1_A3 8
HDMI_0_RX_C

HDMI_1_RX_C
HDMI_0_RX_0

HDMI_0_RX_1

HDMI_0_RX_2

HDMI_1_RX_0

HDMI_1_RX_1

HDMI_1_RX_2

RX0_1B 1_A4 PACLE

AVDD33_USB

RX0_1B 9 1_A4 8 PACLE 4

BL_ON/OFF RX0_0 1_A5
217 BL_ON/OFF 11 RX0_0 9 1_A5 8
LVDS_PWR_EN RX0_0B 1_A6 POCE0#
USB_DM
RDQS0_

RDQS1_

USB_DP

EPAD_GND RX0_0B 9
RCLK0_

LVDS_PWR_EN 11 1_A6 8 POCE0# 4

VCC2IO

VCC2IO

VCC2IO

VCC2IO

VCC2IO
RDQM1

RDQM0

AC Drop_DET RX0_C 1_A7 POOE#

RDQS0

RDQS1
RDQ11

RDQ13

RDQ15

RDQ12
RDQ14
RDQ10
RVREF

RCLK0

AC Drop_DET 11 RX0_C 9 1_A7 8 POOE# 4

RDQ6
RDQ2

RDQ0

RDQ9

RDQ8
RDQ1

RDQ3
RDQ7
RDQ5
VCCK

VCCK

VCCK
REXT

RX0_CB 1_A8 PDD7

RX0_CB 9 1_A8 8 PDD7 4
DDRV AMP_MUTE RX1_2 1_A9 PDD6
LED_G AMP_MUTE 4,5 (OPCTRL1) RX1_2B
RX1_2 9
1_A10 1_A9 8 PDD5 PDD6 4
B LED_G 11 RX1_2B 9 1_A10 8 PDD5 7 B
LED_R RX1_1 1_A11
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216

LED_R 11 RX1_1 9 1_A11 8

RX1_1B 1_A12
RX1_1B 9 1_A12 8
SYS EE_WP RX1_0 1_A13 UART_Det
SYS EE_WP 4 RX1_0 9 1_A13 8 UART_Det 4
R36 C67 PANEL SLET RX1_0B RCLK0 ARC_SELECT
PANEL SLET 7 RX1_0B 9 RCLK0 8 ARC_SELECT 9
1K/1%/0402 0.1uF/10V/0402 LIGHT_S_C RX1_C RCLK0# CP_C
AVDD3V3_HDMI1

AVDD1V2_HDMI1

LIGHT_S_C 11 RX1_C 9 RCLK0# 8 CP_C 6

LIGHT_S_D RX1_CB 1_WE#
REXT

LIGHT_S_D 11 RX1_CB 9 1_WE# 8

USB_DM0
USB_DP0

1_ODT
RDQ15

RDQ1
RDQS0#

RDQS1#

RX0_CB

RX1_CB
RCLK0#

1_ODT 8
RX0_0B

RX0_1B

RX0_2B

RX1_0B

RX1_1B

RX1_2B
RDQM0
RDQM1

RDQS1
RDQS0
RVREF

1_CAS# PDD1
RDQ11

RDQ13

RDQ12
RDQ14
RDQ10
RCLK0

TP15
RX0_C

RX1_C
RX0_0

RX0_1

RX0_2

RX1_0

RX1_1

RX1_2
RDQ6

DDRV
RDQ2

RDQ9

RDQ8

RDQ3
RDQ7
RDQ5

1_CAS# 8
1_RAS# PDD0 TP16
DDRV

VCCK

DDRV

DDRV

DDRV

VCCK
RDQ0

1_RAS# 8
System IO 1_CKE
R37

RVREF 1_CS# 1_CKE 8

OPWRSB 1_RST# 1_CS# 8
ORESET# OPWRSB 11 1_BA0 1_RST# 8
VCCK

ORESET# 4 1_BA0 8
AVDD3V3

OXTALI 1_BA1
OXTALI 4 1_BA1 8
24K/1%/0402

R38 C68 OXTALO HDMI_SDA0 1_BA2

OIRI OXTALO 4 HDMI_SCL0 HDMI_SDA0 9 1_BA2 8
1K/1%/0402 0.1uF/10V/0402
OIRI 11 HDMI_SCL0 9
U0TX
U0TX 4,6
HDMI_HPD0
HDMI_HPD0 9 Tuner and Demod TS I/F
U0RX HDMI_SDA1
U0RX 4,6 HDMI_SDA1 9
SDA_SYSTEM HDMI_SCL1
SCL_SYSTEM SDA_SYSTEM 4,5,7 HDMI_HPD1 HDMI_SCL1 9 IFAGC
SCL_SYSTEM 4,5,7 HDMI_HPD1 9 IFAGC 10

SPDIF Out
DDRV
SPDIF_OUT
AVDD3V3 SPDIF_OUT 6,9
AUDIO ADC IN
R39 SPK Key
(Pin41) AVDD33_PLLGP YPbPr_R_In0
YPbPr_R_In0 6
0/0402 AMP_MCK SAR0 YPbPr_L_In0
AMP_MCK 5 SAR0 11 YPbPr_L_In0 6
C69 C70 C71 C72 C73 C74 C75 AMP_LRCLK Power Key
AMP_LRCLK 5 Power Key 11
10uF/10V/0805 1uF/6.3V/0402 0.1uF/10V/0402 0.1uF/10V/0402 C76 C77 AMP_BCK
AOSDATA0 AMP_BCK 5
0.1uF/10V/0402 0.1uF/10V/0402 1uF/6.3V/0402 0.1uF/10V/0402 10nF/50V/0402
AOSDATA0 5
Near to IC
SDA_TUNER
SCL_TUNER SDA_TUNER 10
SCL_TUNER 10

3.3V IO Power ( Close to Mainchip) Core Power ( Close to Mainchip ) Add R73 & R102 if change ADIN0
R73
R40
0/0402
0/0402/NC LIGHT_S_C
SAR1 11

ACD pin to OPCTRL0 LIGHT_S_C R41 10/0402 SCL_SYSTEM

DVDD3V3 VCCK LIGHT_S_D R42 10/0402 SDA_SYSTEM

A (Pin79) (Pin104) (Pin18) (Pin40) (Pin70) (Pin87) (Pin134) (Pin135) (Pin135) (Pin173) (Pin193) (Pin198) 3V3SB A

C78 C79 C80 + C81 C82 C83 C84 C85 C87 C88 C89 C90 C91 C92
0.1uF/10V/0402 4.7uF/6.3V 1uF/6.3V/0402 0.1uF/10V/0402 0.1uF/10V/0402 0.1uF/10V/0402 PDD2 R67 10/1%/0402 BL_ERR
BL_ERR 11
1uF/6.3V/0402 0.1uF/10V/0402 PXE100uF/16V/NC 0.1uF/10V/0402 0.1uF/10V/0402 0.1uF/10V/0402 0.1uF/10V/0402 0.1uF/10V/0402 R102
47K/1%/0402/NC

OPCTRL0 R103 100/0402/NC AC Drop_DET

COMPAL OPTOELECTRONICS CO., LTD

Title
SCHEMATIC,M/B VTV-L32616
Size Docum ent Num ber Rev
XXXXXX 1
Date: Tues day, Novem ber 27, 2012 Sheet 3 of 11

5 4 3 2 1

Downloaded from www.Manualslib.com manuals search engine

 5 4 3 2 1

DVDD3V3

SPI FLASH
DVDD3V3 R43 R45
4.7K/1%/0402 4.7K/1%/0402
U17
U7 POCE0# 1 8 DVDD3V3
1 16 POOE# PDD7 2 CS# VCC 7 R140 10K/0402/NC
NC/SIO3 SCLK POOE# 3 DOUT HOLD#
D DVDD3V3 2 15 PDD6 WP# 3 6 POOE# D
3 VCC SI/SIO0 14 PDD6 3 4 WP#/VPP CLK 5
R44 PDD6
4.7K/1%/0402 4 NC PO6 13 VSS DIN
5 PO2 PO5 12 MX25L6406EM2I-12G/NC
6 PO1 PO4 11
POCE0# 7 PO0 PO3 10
3 POCE0# PDD7 8 CS# GND 9 WP#
3 PDD7 SO/SIO1/PO7 WP#/SIO2
MX25L12845EM1-10G SOP16

C94 C93
0.1uF/10V/0402 0.1uF/10V/0402

RESET Circuit
3V3SB

U8
3V3SB POR R46
1K/1%/0402
3
VCC
2 ORESET#
/RESET ORESET# 3

27MHz CRYSTAL
1 J1
GND R47 C95
10nF/50V/0402
Y1 AX6901ERA 1 100K/1%/0402/NC
2
27MHz/20pF/30ppm/S/2P
(Low reset)
OXTALI R81 0/0402 OXTALO
3 OXTALI OXTALO 3
HDR_1X2_H2031_P2_SW/NC
C C
C96 C97

27pF/50V/0402 27pF/50V/0402

STRAPPING (Default : Serial boot)

UART0
3V3SB 3V3SB 3V3SB
(OPCTRL1)
R87 R51 R52 AMP_MUTE R48 10K/1%
3,5 AMP_MUTE
4.7K/1%/0402 4.7K/1%/0402/NC 4.7K/1%/0402

J2 DVDD3V3
U0RX R53 100/1%/0402 1
3,6 U0RX 2
U0TX R54 100/1%/0402 R49 10K/1%/NC R50 10K/1%
3,6 U0TX
3
SESD0402P1BN-0450-090/NC

SESD0402P1BN-0450-090/NC

R82 100/1%/0402 4 PACLE

3 UART_Det PACLE 3
8/31 Reserve UART_Detect For ESD JWT A2001WV2-4P

A2001WV2-4P-6T2-F2
(Place on TOP_Layer)
1

B B
VD1

VD2
2

SYS EE_WP
SYS EE_WP 3

SYSTEM EEPROM DVDD3V3 DVDD3V3 DVDD3V3 DVDD3V3

64K bit
R57
J3 R56 4.7K/1%/0402 I2C ADDRESS "A0"
SCL_SYSTEM 1 4.7K/1%/0402
SDA_SYSTEM 2 R55
3 R58 4.7K/1%/0402 U9
4.7K/1%/0402/NC 8 1
SYS EE_WP 7 VCC E0 2
JWT A2001WV2-3P SCL_SYSTEM 6 WP E1 3
3,5,7 SCL_SYSTEM SCL E2
SDA_SYSTEM 5 4
A2001WV2-3P-6T2-F2 3,5,7 SDA_SYSTEM SDA GND

BR24T64FJ-WGE2
U5 depend on customer request.
A If yes,need one more GPIO to control pin 7 of U5 A

COMPAL OPTOELECTRONICS CO., LTD

Title
SCHEMATIC,M/B VTV-L32616
Size Document Number Rev
XXXXXX 1
Date: Tuesday, November 27, 2012 Sheet 4 of 11
5 4 3 2 1

Downloaded from www.Manualslib.com manuals search engine

 5 4 3 2 1

L2
SMTDR75-150K 15uH/2A

DVDD SPK_OUTL+ 11
DVDD3V3

47nF/16V

47nF/16V
FB12 R59

470

470
PBY160808T-300Y 3A 3.3/1206/NC
C98 C99 C100 C101 C102 C105 C106 AMP_VCC

22.1K/1%

1uF/50V/0805
2.2uF/16V/0805/NC
C103 C104 C109 C110
C107

R60

C108

R61
0.1uF/50V 0.1uF/50V 0.1uF/50V 0.1uF/50V

33nF/50V
D D
10uF/10V/0805 10uF/10V/0805 10uF/10V/0805 0.47uF/50V/0805/NC 0.68uF/25V 10nF/50V/NC
C111 C112 0.1uF/50V/NC

1uF/50V/0805
R62

C113

0.1uF/50V
C114

C115
4.7nF/50V 4.7nF/50V

SPK_OUTL- 11
L3
SMTDR75-150K 15uH/2A R63
12

11
10

1
DVDD 3.3/1206/NC

C116

C117
PLL_FLTM

GVDD_OUT
VR_ANA

PLL_FLTP

AVSS

BST_A

PVDD_A

PVDD_A

OUT_A
NC

OC_ADJ

SSTIMER
C118 C119 C120

13 0.68uF/25V 10nF/50V/NC
AVDD 0.1uF/50V/NC
14 48
/FAULT PGND_AB
R64 10/0402 15
3 AMP_MCK MCLK 47
R65 18.2K/1% PGND_AB
16 46
OSC_RES OUT_B
R66 U10 45 AMP_VCC
PVDD_B
AMP_PDN 17
DVSSO
High : Enable
10K/1%
C121 PVDD_B
44
AD mode : (1) Mount :C131 ,C141 ;C159 ,C163
Low : Disable 18 ;C134
VR_DIG
TAS5707 BST_B
43 C125 33nF/50V C123 C124
(2) Mount :C121 ;C158 ;C134
AMP_PDN
1uF/50V/0805
19 42 C122 33nF/50V 1uF/50V/0805/NC
BD mode : (1) Mount :C131 ,C141 ;C159
/PDN BST_C 0.1uF/50V/NC ,C163
R68 10/0402 20 41 AMP_VCC
3 AMP_LRCLK LRCLK PVDD_C

R69 10/0402 21 40
3 AMP_BCK SCLK PVDD_C
C C

R70 10/0402 22 39

1uF/50V/0805
3 AOSDATA0 SDIN OUT_C

0.1uF/50V
23 38
TH_PD

AMP_SDA
SDA PGND_CD
AMP_SCL 24
SCL 37
GVDD_OUT

PGND_CD
C126

C127
PVDD_D

PVDD_D
/RESET

OUT_D
BST_D
STEST

AGND
DVDD

VREG
DVSS

GND

R71 AMP_PDN
3,4 AMP_MUTE
25

26

27

28

51

29

30

31

32

33

34

35

36

4.7K/1%

AMP_MUTE
1uF/50V/0805

Low : Enable R79 L4

0.1uF/50V

High : Disable
AMP_VCC SMTDR75-150K 15uH/2A
33nF/50V

10K/0402/NC
AMP_PDN R74 100K/1% AMP_RST
SPK_OUTR+ 11

DVDD
1uF/50V/0805
C128

C129

C130

R75 R76
0.1uF/50V

3.3/1206/NC
1K/1% C131 C132
C133 C134 C135 C136
0.1uF/50V 10uF/10V/0805
C137 0.47uF/50V/0805/NC 0.68uF/25V 10nF/50V/NC
0.1uF/50V/NC
0.1uF/10V/0402
C138

C139

Delay 100ms

B B

SPK_OUTR- 11
L5
SMTDR75-150K 15uH/2A R77
3.3/1206/NC

C140 C141 C142

0.68uF/25V 10nF/50V/NC
0.1uF/50V/NC

SDA_SYSTEM R78 10/0402 AMP_SDA

3,4,7 SDA_SYSTEM
SCL_SYSTEM R80 10/0402 AMP_SCL
3,4,7 SCL_SYSTEM

A A

COMPAL OPTOELECTRONICS CO., LTD

Title
SCHEMATIC,M/B VTV-L32616
Size Document Number Rev
XXXXXX 1
Date: Tuesday, December 11, 2012 Sheet 5 of 11
5 4 3 2 1

Downloaded from www.Manualslib.com manuals search engine

 5 4 3 2 1

Component input A/V input OPT SPDIF out

R123
SPDIF_OUT 3,9
Close to IC Close to CONN. IO1
6
IO4 47/1%/0402
1x5_CX_COMPO-AUDIO_SW_H8.5 2/1 Modify
R83 7 GND 1
D CVBS0P C143 T1 Y-V_IN GND IN 5V_SW C170 D
3 CVBS0P 100/1%/0402 Y S1 100pF/25V/0402/NC
47nF/16V/0402 R84 G 2 FB16
10/1%/0402 VCC PBY160808T-300Y 3A
SOY0 C145 Y-V_IN
3 SOY0 T2 3
Pb_HD
1.5nF/50V/0402 R85 R86 Pb S2 GND C171
Y0P C147 G 0.1uF/10V/0402
3 Y0P 100/1%/0402 18/1%/0402 YUQIU/OPTICAL_V
10nF/50V/0402
C148 13 T3 Pr_HD
10pF/50V/0402 R88 PF Pr S3
G
R89 56/1%/0402 12
COM0 C149 R90 PF
3 COM0 100/1%/0402 0/0402 T4 YBRL_IN0
10nF/50V/0402 L S4
G R100 100/0402 D_TX Modify form last version
B5 R205 0/NC YBRL_IN0 5V_SW
R91 R92 SW T5 YBRR_IN0
PB0P C150 Pb_HD R S5 R127
C 3 PB0P 100/1%/0402 G R101 100/0402 1 2 C
D_RX
CP_C 3
10nF/50V/0402 18/1%/0402 10K/0402
C152

C
FB15
R94 R144
10pF/50V/0402 D_RX 1 2 B LMBT3904L
56/1%/0402 PBY160808T-300Y 3A 47K/1%/0402

1
C371 Q5

E
1
C224
R95 R96 10pF/50V/NC U0RX 3,4

2
PR0P C153 Pr_HD 10pF/50V/NC

2
3 PR0P 100/1%/0402
10nF/50V/0402 18/1%/0402 R121
C155 R98 1 2

10pF/50V/0402 56/1%/0402 4.7K/0402

CP_C = "Low"
UART communication workable.
B
Close to CONN. Close to IC CP_C = "High" B

UART communication disable.

Q4
FB14
YBRL_IN0 C151 10uF/6.3V 30K/1%/0402 R93 YPbPr_L_In0 LMBT3906L
YPbPr_L_In0 3 E C
D_TX
U0TX 3,4
PBY160808T-300Y 3A
1

1
C369 C315

B
10pF/50V/NC 10pF/50V/NC
2

2
R214 1 2 10K/0402
YBRR_IN0 C154 10uF/6.3V 30K/1%/0402 R97 YPbPr_R_In0
YPbPr_R_In0 3

Y-V_IN Pr_HD Pb_HD YBRL_IN0 YBRR_IN0

1

A VD8 VD9 VD10 VD11 VD12 A

COMPAL OPTOELECTRONICS CO., LTD

2

Title
SCHEMATIC,M/B VTV-L32616
SESD0402P1BN-0450-090/NC SESD0402P1BN-0450-090/NC Size Document Number Rev
SESD0402P1BN-0450-090/NC SESD0402P1BN-0450-090/NC SESD0402P1BN-0450-090/NC
XXXXXX 1
Date: Tuesday, November 27, 2012 Sheet 6 of 11
5 4 3 2 1

Downloaded from www.Manualslib.com manuals search engine

 5 4 3 2 1

WXGA A2006WV0-2X10P (PIN21~PIN40)

FHD A2006WV0-2X20P (PIN1~PIN40)
CN1
D A2006WR0-2X20P D

TX_AO0P 39 40 TX_AO0N
CN5 3 TX_AO0P 39 40 TX_AO0N 3
P-TWO 30P 1.00MM/NC TX_AO1P 37 38 TX_AO1N
3 TX_AO1P 37 38 TX_AO1N 3
32

TX_AO2P 35 36 TX_AO2N LVDS_PWR

30 3 TX_AO2P 35 36 TX_AO2N 3
29 TX_AOCKP 33 34 TX_AOCKN
28 3 TX_AOCKP 33 34 TX_AOCKN 3
27 TX_AO3P 31 32 TX_AO3N R128
TX_AO3P 26 3 TX_AO3P 31 32 TX_AO3N 3 4.7K/NC
TX_AO3N 25 TX_AO4P 29 30 TX_AO4N
24 3 TX_AO4P 29 30 TX_AO4N 3
TX_AOCKP 23 27 28 LVDS_SEL
TX_AOCKN 22 27 28
21 25 26
TX_AO2P 20 25 26 R129
TX_AO2N 19 23 24 1.8K/NC
18 23 24 LVDS_PWR
TX_AO1P 17 LVDS_PWR 21 22 LVDS_PWR
TX_AO1N 16 21 22
15 19 20
TX_AO0P 14 19 20 C172 C173
TX_AO0N 13 17 18 0.1uF/50V
12 17 18 ELNA SE100uF/16V
11 15 16
LVDS_SEL 10 15 16
9 PANEL_SDA_P 13 14 PANEL_SCL_P
C 8 13 14 C
7 TX_AE0P 11 12 TX_AE0N
6 3 TX_AE0P 11 12 TX_AE0N 3
LVDS_PWR 5 TX_AE1P 9 10 TX_AE1N
LVDS_PWR 4 3 TX_AE1P 9 10 TX_AE1N 3
LVDS_PWR 3 TX_AE2P 7 8 TX_AE2N
LVDS_PWR 2 3 TX_AE2P 7 8 TX_AE2N 3
1 TX_AECKP 5 6 TX_AECKN
31

3 TX_AECKP 5 6 TX_AECKN 3
TX_AE3P 3 4 TX_AE3N
3 TX_AE3P 3 4 TX_AE3N 3
TX_AE4P 1 2 TX_AE4N
3 TX_AE4P 1 2 TX_AE4N 3

PANEL SLET R130 100/0402/NC LVDS_SEL

3 PANEL SLET

USB

IO6
EQUAL LENGTH and SDA_SYSTEM R131 10/0402 PANEL_SDA_P
DIFFERENTIAL
D

USB_RA_YQ +5V_USB0
B IMPEDANCE 90ohm B
G
6

L77 Q6 SDA_SYSTEM
1 CL-2M2012-181JT 2N7002/NC PANEL_I2C_EN SDA_SYSTEM 3,4,5
2 USB_DM0 SCL_SYSTEM
3 USB_DM0 3 SCL_SYSTEM 3,4,5
USB_DP0
4 USB_DP0 3
1

1
5

C175 + C174 VD18 VD19 SCL_SYSTEM R132 10/0402 PANEL_SCL_P

D

0.1uF/10V/0402 PANEL_I2C_EN R133 10/0402 PDD5

PDD5 3
10uF/16V/0805
G
2

SESD0402P1BN-0450-090/NC Q7
SESD0402P1BN-0450-090/NC 2N7002/NC PANEL_I2C_EN
R134
10K/0402

USB Power Control

FB17 F1 +5V_USB0
A PBY160808T-121Y 2.5A 1206L075THYR A
5V_SW

USB POWER
COMPAL OPTOELECTRONICS CO., LTD
Title
SCHEMATIC,M/B VTV-L32616
Size Document Number Rev
XXXXXX 1
Date: Tuesday, November 27, 2012 Sheet 7 of 11
5 4 3 2 1

Downloaded from www.Manualslib.com manuals search engine

 5 4 3 2 1

RDQ0
RDQ1 RDQ0 3

DDR3#1
RDQ1 3
1Gb DDR3-1600 for H5TQ1G63DFR-PBC Damping and Termination for CLK RDQ2
RDQ3 RDQ2 3
RDQ4 RDQ3 3
U11 RDQ5 RDQ4 3
H5TQ1G63DFR-PBC_MTK RDQ6 RDQ5 3
RDQ6 3
Close to Mainchip Close to DRAM RDQ7
RDQ8 RDQ7 3
D RDQ9 RDQ8 3 D
RDQ0 E3 N3 B_A0 RCLK0 RDQ10 RDQ9 3
RDQ1 F7 DQ0 A0 P7 B_A1 RDQ11 RDQ10 3
RDQ2 F2 DQ1 A1 P3 B_A2 RDQ12 RDQ11 3
RDQ3 F8 DQ2 A2 N2 B_A3 R135 RDQ13 RDQ12 3
RDQ4 H3 DQ3 A3 P8 B_A4 RDQ14 RDQ13 3
DQ4 A4 100/0402 RDQ14 3
RDQ5 H8 P2 B_A5 RDQ15
RDQ6 G2 DQ5 A5 R8 B_A6 RDQ15 3
RDQ7 H7 DQ6 A6 R2 B_A7 RCLK0# RDQS1
RDQ8 D7 DQ7 A7 T8 B_A8 RDQS1# RDQS1 3
RDQ9 C3 DQ8 A8 R3 B_A9 RDQS0 RDQS1# 3
RDQ10 C8 DQ9 A9 L7 B_A10 RDQS0# RDQS0 3
RDQ11 C2 DQ10 A10/AP R7 B_A11 RDQM1 RDQS0# 3
RDQ12 A7 DQ11 A11 N7 B_A12 RDQM0 RDQM1 3
RDQ13 A2 DQ12 A12/BC# T3 B_A13 RDQM0 3
DQ13 A13
RDQ14
RDQ15
B8
A3 DQ14 J1
Damping for DDR ADDR/CMD
DQ15 NC_0 J9 RP1 1_A0
NC_1 100R/0804 1_A0 3
L1 1_WE# 1 2 B_WE# 1_A1
RDQS1 C7 NC_2 L9 1_CAS# 3 4 B_CAS# 1_A2 1_A1 3
RDQS1# B7 UDQS NC_3 M7 1_RAS# 5 6 B_RAS# 1_A3 1_A2 3
RDQS0 F3 UDQS# NC_4 T7 1_A12 7 8 B_A12 1_A4 1_A3 3
RDQS0# G3 LDQS NC_6 1_A5 1_A4 3
RDQM1 D3 LDQS# M2 B_BA0 1_A6 1_A5 3
C UDM BA0 1_A6 3 C
RDQM0 E7 N8 B_BA1 1_ODT R136 100/0402B_ODT 1_A7
LDM BA1 M3 B_BA2 1_CS# R137 100/0402B_CS# 1_A8 1_A7 3
BA2 J7 RCLK0 1_BA0 R138 100/0402B_BA0 1_A9 1_A8 3
B_RST# T2 CK K7 RCLK0# 1_BA2 R139 100/0402B_BA2 1_A10 1_A9 3
RESET# CK# L2 B_CS# 1_A11 1_A10 3
ZQ1 L8 CS# K3 B_CAS# RP2 1_A12 1_A11 3
100R/0804 1_A12 3
ZQ CAS# K1 B_ODT 1_RST# 1 2 B_RST# 1_A13
ODT J3 B_RAS# 1_A9 3 4 B_A9 1_A13 3
RAS# L3 B_WE# 1_A13 5 6 B_A13 RCLK0
R141 DDRV WE# K9 B_CKE 1_A0 7 8 B_A0 RCLK0# RCLK0 3
240/0402 CKE 1_WE# RCLK0# 3
1_ODT 1_WE# 3
RP3 100R/0804
A1 B1 1_A3 1 2 B_A3 1_CAS# 1_ODT 3
A8 VDDQ_0 VSSQ_0 B9 1_A5 3 4 B_A5 1_RAS# 1_CAS# 3
C1 VDDQ_1 VSSQ_1 D1 1_A2 5 6 B_A2 1_CKE 1_RAS# 3
C9 VDDQ_2 VSSQ_2 D8 1_A7 7 8 B_A7 1_CS# 1_CKE 3
D2 VDDQ_3 VSSQ_3 E2 1_RST# 1_CS# 3
E9 VDDQ_4 VSSQ_4 E8 RP4 1_RST# 3
VDDQ_5 VSSQ_5 100R/0804
F1 F9 1_A4 1 2 B_A4 1_BA0
H2 VDDQ_6 VSSQ_6 G1 1_BA1 3 4 B_BA1 1_BA1 1_BA0 3
H9 VDDQ_7 VSSQ_7 G9 1_A10 5 6 B_A10 1_BA2 1_BA1 3
VDDQ_8 VSSQ_8 1_CKE 7 8 B_CKE 1_BA2 3
B2 A9
D9 VDD_0 VSS_0 B3 RP5
B
VDD_1 VSS_1 100R/0804 B
G7 E1 1_A11 1 2 B_A11
K2 VDD_2 VSS_2 G8 1_A8 3 4 B_A8
K8 VDD_3 VSS_3 J2 1_A6 5 6 B_A6
N1 VDD_4 VSS_4 J8 1_A1 7 8 B_A1
DDRV N9 VDD_5 VSS_5 M1 DDRV
R9 VDD_6 VSS_6 M9
R1 VDD_8 VSS_7 P1
VDD_7 VSS_8 P9
VSS_9 T1
R145 C176 VSS_10 T9 C177 R146
1K/1%/0402 0.1uF VSS_11 0.1uF/10V/0402 1K/1%/0402
DDRV

RVREF1 H1 M8 RVREF2
VREFDQ VREFCA

C179 R148
R147 C178 0.1uF/10V/0402 1K/1%/0402 C180 C181 C182 C183
1K/1%/0402 0.1uF/10V/0402 0.1uF/10V/0402 0.1uF/10V/0402 0.1uF/10V/0402 0.1uF/10V/0402

A A

COMPAL OPTOELECTRONICS CO., LTD

C184 C185 C186
0.1uF/10V/0402 0.1uF/10V/0402 10uF/16V/0805
Title
SCHEMATIC,M/B VTV-L32616
Size Document Number Rev
XXXXXX 1
Date: Tuesday, November 27, 2012 Sheet 8 of 11
5 4 3 2 1

Downloaded from www.Manualslib.com manuals search engine

 5 4 3 2 1

CEC R149 HDMI_CEC

HDMI_CEC 3
For ESD Test 100/1%/0402

HDMI port 1
IO7
L82 RX0_2
RX0_2 3
SESD0402P1BN-0450-090/NC

D RX1_2 QTC24CG900U 1 RX0_2B D

CEC RX1_2B 2 TMDSD2+ RX0_1 RX0_2B 3
L83 3 DSHLD0 RX0_1B RX0_1 3
RX1_1 QTC24CG900U 4 TMDSD2- RX0_0 RX0_1B 3
TMDSD1+ RX0_0 3
1

HDMI_PLUGPWR1 RX1_1B 5 RX0_0B

L84 6 DSHLD1 RX0_C RX0_0B 3
RX1_0 QTC24CG900U 7 TMDSD1- RX0_CB RX0_C 3
RX1_0B 8 TMDSD0+ RX0_CB 3
L85 9 DSHLD2 RX1_2
R150 R151 RX1_C QTC24CG900U 10 TMDSD0- RX1_2B RX1_2 3
VD21
2

47K/1%/0402 47K/1%/0402 RX1_CB 11 TMDSC+ RX1_1 RX1_2B 3

12 CSHLD0 RX1_1B RX1_1 3
13 TMDSC- RX1_0 RX1_1B 3
TP2 cab_p 14 CEC RX1_0B RX1_0 3
HDMI_SCL1 R152 100/1%/0402 HDMI_SCL 15 NC RX1_C RX1_0B 3
HDMI_SDA1 R153 100/1%/0402 HDMI_SDA 16 SCL RX1_CB RX1_C 3
17 SDA RX1_CB 3
HDMI1-5V 18 DDC_GND
R154 19 VCC5 HDMI_SDA0
75/1%/0402 HPD HDMI_SCL0 HDMI_SDA0 3
20 HDMI_HPD0 HDMI_SCL0 3
SHLD0 HDMI_HPD0 3
SESD0402P1BN-0450-090/NC

SESD0402P1BN-0450-090/NC

SESD0402P1BN-0450-090/NC

SESD0402P1BN-0450-090/NC

R155 R156 21
47K/1%/0402 909/1%/0402 22 SHLD1 HDMI_SCL1
SHLD2 HDMI_SCL1 3
1

HDMI_SDA1
HDMI_HPD1 HDMI_HPD1 HDMI_SDA1 3
FREEPOT/HDMI_SMD_V HDMI_HPD1 3
C

5V_SW R157
B Q8 100K/1%/0402
C

R159
VD26 2

VD23 2

VD24 2

VD25 2

B Q9
E

47K/1%/0402 LMBT3904LT1G LMBT3904LT1G 5V_SW

E

C C

HDMI_PLUGPWR1 D1 BAT54C/NC

1 DVDD3V3

HDMI_PLUGPWR1 3
DVDD3V3
2 HDMI1-5V R209
10K

R158 0/0402
U25
1 5
3 ARC_SELECT OE VCC C86
2
3,6 SPDIF_OUT A
3 4 R206 180 1 2 HDMI_ARC
GND Y
SN74LVC1G125DCKR 1uF/6.3V/0402

C144
R207 R208
0.1uF/10V/0402 82 100K

HDMI port 0
IO8
L78
SESD0402P1BN-0450-090/NC

RX0_2 QTC24CG900U 1
B CEC RX0_2B 2 TMDSD2+ B
L79 3 DSHLD0
TMDSD2-
1

RX0_1 QTC24CG900U 4
HDMI_PLUGPWR0 RX0_1B 5 TMDSD1+
L80 6 DSHLD1
RX0_0 QTC24CG900U 7 TMDSD1-
RX0_0B 8 TMDSD0+
L81 9 DSHLD2
2

R160 RX0_C QTC24CG900U 10 TMDSD0-

VD36

R161 TMDSC+
47K/1%/0402 47K/1%/0402 RX0_CB 11
12 CSHLD0
13 TMDSC-
HDMI_ARC R211 0/0402 14 CEC
HDMI_SCL0 R162 100/1%/0402 15 NC
HDMI_SDA0 R163 100/1%/0402 16 SCL
17 SDA
HDMI0-5V 18 DDC_GND
R164 19 VCC5
75/1%/0402 HPD
20
SHLD0
SESD0402P1BN-0450-090/NC

SESD0402P1BN-0450-090/NC

SESD0402P1BN-0450-090/NC

SESD0402P1BN-0450-090/NC

R165 R166 21
47K/1%/0402 909/1%/0402 22 SHLD1
SHLD2
1

HDMI_HPD0 FREEPOT/HDMI_SMD_V
R167
C

5V_SW 100K/1%/0402
B Q10
C

VD38 2

VD39 2

VD40 2

VD41 2

R169
B Q11
E

5V_SW
47K/1%/0402 LMBT3904LT1G LMBT3904LT1G
E

A HDMI_PLUGPWR0 D2 BAT54C/NC A

HDMI_PLUGPWR0 3

2 HDMI0-5V

COMPAL OPTOELECTRONICS CO., LTD

R168 0/0402 Title
SCHEMATIC,M/B VTV-L32616
Size Document Number Rev
XXXXXX 1
Date: Tuesday, November 27, 2012 Sheet 9 of 11
5 4 3 2 1

Downloaded from www.Manualslib.com manuals search engine

 5 4 3 2 1

+3.3V_TUNER_1 +3.3V_TUNER
FB18
+3.3V_TUNER
Depend on tuner SPEC.
PBY160808T-300Y 3A
U12 C187 C188 C189 R170 4.7K/1%/0402
R171 4.7K/1%/0402
D TDST-H020F 0.1uF/10V/0402 D
330pF/50V/0402 10uF/10V/0805
TUNER_CLK R173 100/1%/0402 SCL_TUNER
1 SCL_TUNER 3
TUNER_DATA R174 100/1%/0402
NC 2
NC
TDST-H020F

3 TUNER_DATA
SDA 4 TUNER_CLK
close to tuner C190 C191
12 SCL 5
13 GND +B1 [3.3V] 6 47pF/50V/0402 47pF/50V/0402
14 GND NC 7
15 GND NC 8
GND NC
IF AGC
9
10
TU_AGC
DIF1_OUT2
R175 IFAGC_1
Near to Tuner
DIF+
1

11 DIF1_OUT1 10K/1%/0402
DIF- C192 SDA_TUNER
47nF/16V/0402 SDA_TUNER 3
2

Close to TUNER

Tuner I2C
C C

C194 C193
68pF/50V/0402/NC
47pF/50V/0402
C195
DIF1_OUT2 R177 R178 FAT_IN-
L6 L7 0 100/1%/0402 0/0402 FAT_IN- 3
1uF/6.3V/0402 CLS UPB160808T-121Y-N
R179
200/1%/0402

C196
DIF1_OUT1 L9 0 R180 R181 FAT_IN+
L8 100/1%/0402 0/0402 FAT_IN+ 3
1uF/6.3V/0402 CLS UPB160808T-121Y-N
C198 C197
68pF/50V/0402/NC

FOR TUNER (3.3V)

47pF/50V/0402

(330mA)
B B
Near to Tuner Near to mainchip U13 +3.3V_TUNER
5V_SW AX1117AD33A

FB19 3 2
CLS UPB201212T-121Y-N 5A VIN VOUT

ADJ / GND R182

249/1%/NC
1
C199 + C200 + C201 C202 C203
IFAGC_1 R183 IFAGC
IFAGC 3 10uF/16V/0805 0.1uF/10V/0402 10uF/10V/0805
10K/0402 0.1uF/10V/0402
C204 R184 ELNA SE100uF/16V/NC
C205 0
10uF/6.3V/NC
47nF/16V/0402

Close to mainchip
A A

COMPAL OPTOELECTRONICS CO., LTD

Title
SCHEMATIC,M/B VTV-L32616
Size Document Number Rev
XXXXXX 1
Date: Tuesday, November 27, 2012 Sheet 10 of 11
5 4 3 2 1

Downloaded from www.Manualslib.com manuals search engine

 5 4 3 2 1

DVDD3V3 R186 NC if
change ACD DTC
pin
CN2
AMP_VCC C226,C227 for
R185 1
EMI solution 2
22K/0402/NC R186
4.7K/0402 3
4
C206 C226 5
R217 6
22uF/16V/1206 10nF/25V/0402
7
100 +12V 8
3 AC Drop_DET C227 10nF/25V/0402 (12V PANEL)
D
Q14 C207 10uF/10V/0805 9 +12V LVDS_PWR D
C

DRC2114E/NC (5V PANEL) 10 U14

+5VSB 11
BL_ERR C208 POWER_EN FB20 panel_power 1 8 FB21 TP19
3 BL_ERR 10K B R187 0/0402 AC Drop_DET1 12 CLS UPB201209T-300Y-N 6A 2 S1 D4 7 CLS UPB201209T-300Y-N 6A
100pF/25V/0402 BKLT_EN 13 3 S2 D3 6
14 S3 D2
10K BL_DIMMING_C
15 5V_SW FB22 C209 C210 R188 4
G D1
5 R189 Placement
POWER_EN +5VSB R72 BL_ERR CLS UPB201209T-300Y-N 6A/NC 47K/1% 1K/1206
2 POWER_EN 0/0402/NC 16 on TOP_Layer
10uF/16V/0805 DMG4435SSS
E

JWT A2001WR2-16P
C211 C212

1nF/25V/0402 1nF/25V/0402
POWER INTERFACE 1uF/50V/0805/NC

C
R190 47K/1%/0402 B Q15
3 LVDS_PWR_EN
For EMI LMBT3904LT1G

E
High => PANEL POWER ON R191 C213 C214

Low => PANEL POWER OFF 3.3K/1%/0402 10uF/10V/0805

100pF/25V/0402

3V3SB 3V3SB 3V3SB

+5VSB SPK CN4

JWT A2001WR2-4P

C 5 SPK_OUTL+ R203 R202 R210 C

4
2mm

5 SPK_OUTL- 3 10K 10K 10K

R192 5 SPK_OUTR- 2
4.7K/1%/0402 5 SPK_OUTR+ 1 FRONT PANEL CONNECTOR
CN3
JWT A2001WR2-11P
POWER_EN 1
3V3SB
Strapping mode :Must 2 R195 47/1%/0402 OIRI 3
R193 3
default Pull low.
C

4.7K/1%/0402 4 LED_G 3
B Q16 5 LED_R 3
3 OPWRSB
6 R196 0/0402 LIGHT_S_C 3
LMBT3904LT1G 2/17 Modify 7
LIGHT_S_D 3
E

Low => POWER ON R194

47K/1%/0402 R197 BL_DIMMING_C
8
9 R253 1K
High => POWER OFF 3 BL_DIMMING
100/1%/0402 10 R228 10K
Power Key
SAR0
3
3
11 R227 10K SAR1 3
C215 10/20 ESD protaction
C0402/NC 2/17 Modify:
Delete C240 ,C241

C216
For EMI
Place 100pF/25V/0402
R200 R201
B closer 4.7K/1%/0402 B
to U1 For EMI 4.7K/1%/0402

SESD0402P1BN-0450-090

SESD0402P1BN-0450-090

SESD0402P1BN-0450-090

SESD0402P1BN-0450-090

SESD0402P1BN-0450-090
BL_ON/OFF R198 0/0402 BKLT_EN Option :For SRF32T used, mount C178,C223
3 BL_ON/OFF
Option :For SRF32T used, R142 from 100/1% change 1K/1%
R199
10K/1%/0402
VD50

VD51

VD52

VD53

VD54

1nF/25V/0402

1nF/25V/0402
High => Backlight Enable
Low => Backlight Diable

100pF/25V/0402

100pF/25V/0402
1nF/25V/0402/NC

1nF/25V/0402

1nF/25V/0402
1nF/25V/0402
C217

C218

C219

C220

C221

C225

C223

C222
For EMI

A A

COMPAL OPTOELECTRONICS CO., LTD

Title
SCHEMATIC,M/B VTV-L32616
Size Document Number Rev
XXXXXX 1
Date: Tuesday, December 11, 2012 Sheet 11 of 11
5 4 3 2 1

Downloaded from www.Manualslib.com manuals search engine

 SCHEMATIC DIAGRAM3
32:(5

Downloaded from www.Manualslib.com manuals search engine

 5 4 3 2 1

R1
Power_Key
100F
R0603 CN1
D D
SAR1 4
2

S1
VD1 C3 SAR0 3
PESD5V0S1BA 1 2 104/50V
SOD323 C0805 Power_Key 2
3 4
1

1
POWER
JWT A2001WR2-4P
SWD-EVQPA HD-04-P2R

C C
SAR0

R2 R4 R5
16KF 6.04KF 18KF
2

R0603 S3 R0603 R0603 C1 R6

VD2 VOL-
S4 104/50V NC
PESD5V0S1BA
C0805 R0603
SOD323 1 2 1 2
Reserve only
1

3 4 3 4
VOL+

SWD-EVQPA
SWD-EVQPA
B B

SAR1

R8 R9 R10
R7 2KF 6.04KF 18KF
2

16KF R0603 R0603 R0603

VD3 C2
R0603
PESD5V0S1BA S5 S6 S7 104/50V
SOD323 C0805
1 2 1 2 1 2
達達達達達達達達達達
1

DARFON
3 4 3 4 3 4
CUSTOMER MODEL : SPD32T PWR MODU
A CUSTOMER PART NO : PK101V3350I A
INPUT/OK/Hold for MENU
CH- CH+ DARFON Model Name : B167-201 PP
SWD-EVQPA
SWD-EVQPA SWD-EVQPA 2012/11/22 REV. D Reviewed by Tony Ku
Prepared by Paul Wu Approved by Peter Wang

5 4 3 2 1

Downloaded from www.Manualslib.com manuals search engine

 5 4 3 2 1

B+

B+
CCM1
NC
RM1 CC-12DP7.5-R
604KF LM2
R0603 DM6 1.1UH
SR5100 L7DP6
RM10 DM2 ! D20 24V1 24V
RM2 10F CD4148WSN 7
D 604KF R1206 D0805 D

R0603
2 + CEM7 RM34 RM33 RM25 RM24 RM35 RM37 + CEM9 CM14
RM11 ! 8 470U/35V NC NC NC NC NC NC 100U/50V NC
EMI CIRCUIT RM3 91F DM7 CE-10X20 R1206 R1206 R1206 R1206 R1206 R1206 CE-8D-P3.5 C0805

1
604KF R1206 1 QM1 SR5100
R0603 CM8 ZDM1 P1825ATF D20
224/50V CDZ55B15S RM9 RM12 TO220RB 6
C0805 D0805 10F 10KF
RM38 R1206 RM13 R1206 3 LM1
2

3 604KF 10F 2 DM4 1.1UH

R1206 SR540 L7DP6
R0603
DM3 D17.5 12V1 12VCC
CD4148WSN
B+ RM39 D0805
11
18

17

16

15

14

13

12

11

10
4 1 604KF
UM1 2 + CEM3 RM16 RM17 + CEM6 CM10
!
NC

NC

VGH

NC

NC

R0603
VGL
VS

VB

COM
SSC9522S RM14 9 1500U/16V NC NC 100U/25V NC
BD1 B SO18-360 91F CCM3 CE-10X20A R1206 R1206 CE-6.3D-P2.5 C0805
!
2

KBJ408G RM4 DM1 CCM2 R1206 1 NC DM5

! DB-3SR + CEP1 1MF UF1007 10P/3KV CC-5DP5 SR540
2 330uF/220V RM15 4 D17.5
Vsen

GND

R0603 D12.5 CC-P5+7.5

Reg
Css
Vcc

TVS1 CE-16X51-RO 10KF QM2

OC

RC

RV

10
FB

BR1 NC R1206 3 P1825ATF TM1 LM3

1

D17.5 RM30 TO220RB EEM-3434 1.1UH

1

Vsen T-EEM3434 L7DP6

1MF
R0603 CCM4 12VA
10P/3KV
12V_OVP CC-P5+7.5
VCC_Main
BY5 CM5 CM7 RM7 + CEM10 CM16
BEADCORE CEM1 102/50V 224/50V 680F 100U/25V NC
! ! NC C0805 C0805 R0805 CE-6.3D-P2.5 C0805
BF10
RM5 + CE-5D-P2.5 RM6
95.3KF 4.7KF
R0805 CM1 CM2 CM3 R0805 CM4 CM6 CM9
CY1 CY2 104/50V 105/50V 333/50V 474/50V 101/50V 221/1kV
101 101 C0805 C0805 C0805 RM8 CC-P5+7.5 CFM1
CY-12DP10 CY-12DP10
C0805 C0805
CM13 100F
! 473/630V
475/25V R1206 CM-9X23.5
C0805
1 3
LF1
16mH ! VCC 12V1 5VS
L23X25 2 4
12V1

2
ZDM2 ZDM4
CDZ55B15S CDZ55B6V2S
RM23 RM20 D0805 D0805
! ! 470F 3KF

1
R1206 R1206
5VS_OVP RM28 RM36
UM2 100F 100F
CY3 CY4 R0805 R1206
NC NC 4 DIP4 RM32
CY-12DP10 CY-12DP10 VCC 5VS LTV-817
1
10KF
4 1

RM21
TR1 VDD 2.4KF
R1206
1 3 2
1OHM/5A DM8 R0805
! TR10DP5-R RA9

2
t
RA13 NC RM29 CM15
5.1KF
SOT23 CM12 UM4
C
R0805 ACD_NH NC
3 2 NC DM11 LTV-817
1KF 102/50V
C
B RA11
R1206
1 C0805 12V1 24V BAW56 3 DIP4
R0805 C0805

NC
! SOT23
R0805 QA3 ACD_NL

3
1 3 RA1 NC RM22 CM11 RM18 RM26
L1 L2 3 CA5
5.1MF UA2 SOT23 NC 2.4KF 474/50V 43KF NC
NC LF2 NC UA1
JUMP
! R0603 LTV-817 1 4 1 C0805 R0805 C0805 R0805 R0805

3
L6DP3 L6DP3 DIP4 2
L12X12 2 4 RA10
3 4 2 3 RM31
RA2 VCC NDFPO 2
RX1 RX2 RX3 NC 1 1KF
820K ! 820K 820K 3.6MF R0805 ! R1206
R1206 R1206 R1206 R0603 2 1 RA12 CA4 CM17 UM3
GND FPO NC TO92-A RM19 RM27
NC 102/50V
! 12V_OVP

2
R0805 C0805 C0805 AS431BZTR-E1 11.3KF NC
CY5 ! 6 5 CA6 R0805 R0805
BY6 101 IN1 CD

2
NC
CY-12DP10
2

JUMP C0805 ZDM3

BF10 CA1 RA6 CA2 CA3 ZDA1 CDZ55B9V1S
102/50V 300KF 104/50V IN1M101 822/50V CDZ55B6V2S D0805
C0805 R0805 C0805 SOT236 C0805 D0805

1
RY1
1

R1W
NC ! BY4 BY3
VZ1 Jumper Jumper
NC BF15 BF22.5
VZ10D

CX1
AC DETECT CIRCUIT CY7
471
334/275V CY-12DP10
CX-18X16-R

B+
2
1

F1
T4AH/250V
FUSE5X20-HOLD
RS6
4
3

! 100F
BR1 CCM5
NC
R1206
RS32 CCS2
CC-12DP7.5-R
82K/2W 222/1KV CS2
RS9 R1W CC-12DP7.5-R ! RS5 102/50V
820K 100F C0805
! R0603 R1206
L TS1 CS3 LS1
RS10 BS1 900uH DS5 102/50V 1.1UH
N
820K BEADCORE T-EE16-5 SR540 C0805 L7DP6
R0603 BF10 1 D17.5 5V1 5VS
3 2
P801 RS27 ZDS3 DS1
AW 0721-6-PSF-1 820K NC PR1007G
AC-CCT2302 R0603 ZD7.5 D12.5 CES3 + CES4 + RS7
1 2 10 CE-10X20A CE-6.3X11A-P2.5 NC CS6
9 1500U/16V 100U/25V R1206 NC
RS13 CCS3 3 C0805
820K 68P/1KV VCC
R0603 CC-5DP5
RDS1 DS4
B 1ohm/2W CD4148WSN DS2 RS1 4 B
QS4 QS8 RS28 R1W D0805 PR1007G 5.1/1W 7
R1W
VCC_Main
PMBT2907A
SOT23
VCC 5VS PMBT2907A
SOT23
820K
R0603
1
OCP DRAIN
8 D12.5 6

3 2 2 3 2 7 RS3
BR DRAIN 4.7F
CS19 RS25 3 6 R1206
104/50V 10KF GND NC VDD 5
1 C0805 R0805 1 4 5
RS38 RS39 RS40 RS41 FB VCC + CES1
2

RS24 RS36 390F 390F NC NC 22U/50V

2

680F 5.1KF R1206 R1206 R1206 R1206 ZDS4 RS11 CS13 US1 CE-6.3D-P2.5
R0805 R0805 NC 715KF 105/50V RS12 A6069H CS8 ZDS1
RS26 ZD7.5 R0805 C0805 4.7M DIP8 + 105/50V 1N5251B
10KF R0805 CES2 C0805 ZD7.5
!
1

R0805 22U/50V
1

CE-6.3D-P2.5
RS37
4 1 5.1KF P802
R0805 CON16
PWR_ON 5VS HD-16-P2R
3 2 5V1 1
P803 GNDA
CON14 2
US4 RS22 HD-14-P2R-2 GNDA
LTV-817 24KF RS21 1 3
DIP4 3 R0805 1KF 24Vled 24V 12Va 12VA
QS3 R0805 2 4
PMBT3904 24Vled 12Va
1
SOT23 3 5
RS16 24Vled GNDP
2 CS18 RS23 VDD 6.8KF RS17
24Vled
4
GNDP
6
R505
0
104/50V 16KF R0805 13KF
C0805 R0805 ! R0805 5 7
R1206
FB RS20 24Vled GNDP PWR_ON
2

2
RS35 CS14 4 1 2.4KF CS11 6 8
ZDS2 1KF 104/50V R0805 NC GND 12Vcc 12VCC ZD503
NC 2 R0805 C0805 C0805 7 9 NC
GND 12Vcc D0805
D0805 3 2
1 8 10
5VS
1

1
DS3 RS19 CS10 GND 5Vcc
QS2 CD4148WSN US2 1KF 105/50V 9 11
Vsen FB RS14 3 PMBS3906 D0805 LTV-817 R0805 C0805 GND 5Vcc
R504
NC SOT23 DIP4 10 12
GND PWON 22
2

R0805 R1206
CS9 ZDS11 11 13
3
102/50V 1N5251B 1
BL_ERR BL_ERR ACD ACD_NH
B 2 1 1 QS1 C0805 ZD7.5 CS15 12 14
DS6 5VS_OVP PMBT3904 105/50V US3 BLON BLON BLON BLON R503
NC
1

BAV70 SOT23 C0805 AS431BZTR-E1 13 15

DIM R1206
2

RS30 SOT23 RS15 CS12 2 TO92-A RS29 RS18 NC DIM

3.6MF 2.4KF 104/50V NC 12.4KF 14 16 ACD_NL
R0603 R0805 C0805 R0805 R0805 DIM DIM BL_ERR

RS31
3.6MF BL_ERR
R0603 ZDS5
CDZ55B27S 3
D0805 QS9
2 1 1 RK7002 BY2 BY1
A SOT23 Jumper Jumper A
CS16 RS33 RS34 BF10 BF10
101/50V 5.6MF 715KF 2
C0805 R0805 R0805
CY6
471
CY-12DP10

NC = No Component

2.2mm eyelet
1.6mm eyelet
補補 達達達達達達達達達達
DARFON CUSTOMER MODEL : SPD32T PWR MODU
CUSTOMER PART NO : PK101V3350I
DARFON Model Name : B167-201 PP
PCB: FR1-CTI600
2012/11/19 REV. D Reviewed by Tony Ku
Basic: 3.5mm, Reinforced: 7.5mm Prepared by Paul Wu Approved by Peter Wang

5 4 3 2 1

Downloaded from www.Manualslib.com manuals search engine

 1 2 3 4 5 6 7 8

TFDPOEBSZ
!
DSPL-501N
SA101
330uF,220V N.C.
QSJNBSZ
! !
P801 F101
VS101

8TC00653 + R110
4A H/250V ! !
!
LF101:1 ! !
1.2M D401
T101:6 220uF,35V 220uF,35V

S1
!
L 21 !
C601 24Vled
CY106 CY105
221

N.C. N.C. R111 UF4007 10

CY102 CY101

KBJ406G SR3100
R101
P801:1

R104 R103

A ! 471 BD101 1.2M D101 R132 D402 + + A

334

! SR3100 R401 2.7K

TVR10681

R112
VA101

1.2M 4148 FQPF9N25C C401 C402

N.C. N.C. D104 Q101

13

17

18
CX101
221

471
R102

!
N.C. R113 10 !
TH101 1.2M

N.C.

N.C.

N.C.
! ! C104 R122 36K T101:8
12 16
N 34 N.C. VGH R124 J201
LF101:2 R114 16B 36
Vcc
P801:3

! ! SCK015 N.C.
! 1.2M 2 14 ZD102 R123 T101:7 8LR00530
1N4007 1N4007 VCC VB
104 ! L301
D106 D107 C113 T101:4 12Va
8 15
Reg VS
SSC9522 36 + 100uF,25V
FQPF9N25C C304
R115 R116 1 U101 11
10 R125 Q102 J202
0 0 Vsen Vsen VGL ! JUMP
R126 36K
SR560 8LR00530
5 9 T101:11 D301 330uF,25V 330uF,25V L302

S2
CSS RV R127
C106 D105 T101:2 100uF,25V
12Vcc
10 4148

C301

C302

R301
4 10 + + +
C130

C303
C116

SGND PGND
T101:10 D302 910
OC

SR560
RC
FB

105 104 104 82K C101

363 GND
3

472 334
C124

R128

100
C115
C117

680 680 C102

S1
R129 R130
47K T101:9
R131

R202
4

3.0K

R205
5.1K

R203
R204
1
9.1K
3

! 4148 18.7K
D202 !
C123

PC101:1
C120

C121
C122
C118
ZD101

300R139
330R138
470

104
474
100
474

LTV817
9.1C
102

B LTV817 PC101:2 C207 B

2
! D203 5.1K 224
BEAD 1.1K

C
4.7uF/50V 4148
FB501 T501:6 + R210 R212
12 C203 R C208
U201
T501:5 AS431
STO2D-170 P802

A
D501 SR560
8LR00530 GND 1
T501:9 D201 L201 2
110K 110K T501:4

S4
12Va 3
5Vcc
T501:10
4
R501 R502 R214 100 C210 C211 330 C202 + 5
5 8 R215 1.74K 100uF,25V 6
Drain
HV
100 R216 100 102 102
+ R218 8.66K 12Vcc
7
8
R503 R504

1
C516 R217
4.7uF/50V

C201
ZD502

9
D506

110K T501:7
C514

110K
4148

C511
B+

5Vcc 10
36B

1500uF,10V
104

Q204 2K

R207 ZD202
11

S2
T501:8 ! 102 R220 PWON 12

N.C. 2
VDD Drain
7 C212 4403
ACD 13

PWON
330 15B
2
R117 + 1.8K BLON 14

PC501:2

SCR201
U501 5.1K BT169D R222 1K
DIM 15
BL_ERR 16

A
R118 LTV817 FSB127H R223

C
R224C213 24K

1
PC501:1 Q205 R225

330 R226

330 R227
3 6
FB Drain 224 4401
4

R
R119 D108 27K
G P803
ZD503

C216
AS431

R206

104P
C513

8.2K 24Vled 1
R522

16K
U202 A

2
3 1 2
R120 Vsen R228 R229
3

3
1 4 4
GND IPK
Q103 104 5
47.5K

R121 ZD104 LTV817 !

ZD504

C214 6
2

102

PC502:2
C515

7
16B

103
C131

8
R145

6.2B
R146

5Vcc
C 9 C
10
11
12
N.C. N.C. 13
14
R201 R232
BEAD 1N4937 1.5 0
KSP2222A J203
Q502 FB502 D504 R524 T501:1 ACD
Vcc 21

6.2B ZD201
4

LTV817 + N.C.

R233 N.C.
5.1K PC502:1 C512 Q201
R528 22uF/50V !

4
102
3

LTV817
16B PC103:1 C217
ZD505 5.1K
R135 T501:2
3

4148
D505 R105 24B
!
1

1.2M
ZD103
R106 LTV817
1.2M PC103:2
R107
2

1.2M

R108
1.2M
3 4 471 !
Vcc NDFPO 0
R109 IN1M102 FB101 CY103
1.2M C125
104 U102
2 1 152
Vss FPO
!
CY104 R

D 6 5
٤ዧٞᄐैٝ‫ૻڶ‬ֆ‫׹‬ D
IN1 CD
104 FSP Technology Inc.
C126
R137

223

68K 102 FSP GROUP

C127 C128
E-LED D-LED TITLE: FSP079-4F01

5Vcc 1.7A 1.7A

P/N: 3BS0334712GP size: A2 rev: 2.4
APPROVED: CHECKED: DESIGNER:
12Vcc 1.0A 1.0A
Gerry Joey Feimin
12Va 0.8A 1.6A
Date: 2012/12/4 PCB File: FSP079-4F01-R2 Sheet 1 of 2
H=23.0mm USA 32" 120V WO/PFC 24Vled 1.31A 1.55A File: E:\AD6\70W\FSP079-4F01-R2-1(Panasonic-A70-32)\FSP079-4F01-WITH VALUE\FSP079-4F0
ᒵሁቹ ।໢ᒳᇆ:7000P-0106

1 2 3 4 5 6 7 8

Downloaded from www.Manualslib.com manuals search engine

 1 2 3 4

A R1 CN1 A

Power Key 1
100 100nF Power Key 2
SAR0 3

S1 C3 SAR1 4

LSBLC05C VD1 1 2 GND

3 4

POWER

B (1.006V) (1.513V) B
SAR0

16KF 6.04KF 18KF 100nF N.C.

LSBLC05C VD2 R2 R4 R5 C1 R6
S3 S4
1 2 1 2

3 4 3 4

VOL- VOL+

C (0.498V) (1.006V) (1.513V) C

SAR1

16KF 2KF 6.04KF 18KF 100nF

LSBLC05C VD3 R7 R8 R9 R10 C2
S5 S6 S7
1 2 1 2 1 2 R

3 4 3 4 3 4 ٤ዧٞᄐैٝ‫ૻڶ‬ֆ‫׹‬
FSP GROUP FSP Technology Inc.
CH- CH+ INPUT/OK/ TITLE: FSP079-4F01
Hold for MENU P/N: 3BS0334712GP size: A4 rev: 2.4
APPROVED: CHECKED: DESIGNER:
D D
Gerry Joey Feimin
Date: 2012/12/4 PCB File: FSP079-4F01-R2 Sheet 2 of 2
File: E:\AD6\70W\FSP079-4F01-R2-1(Panasonic-A70-32)\FSP079-4F01-WITH VALUE\FSP079-4
ᒵሁቹ ।໢ᒳᇆ:7000P-0106
1 2 3 4

Downloaded from www.Manualslib.com manuals search engine

 APPENDIX-A: Main assembly
SPE32 (TC-L32XM6)
Version:02
Part Number
REF. Chassis no: SPE32T
Description Q’ty Remarks
No
Product no SPE32TMA010 Product no SPE32TMA101
SKD-ADI
1 PCBA IR/B 454C4070L01 454C4070L01 1

2 FIRMWARE M/B 461C6270L31 461C6270L31 1

3 LCD MODU AC6VM3205R1 NA 1

4 SPK SET(90d)(PIN90d) CG100513G0I CG100513G0I 2

5 H-CON SET DC02A00130I DC02A00130I 1

6 H-CON SET DC02L00700I DC02L00700I 1

7 H-CON SET DC02P02010I DC02P02010I 1

8 H-CON SET DC02P02030I DC02P02030I 1

9 H-CON SET DC02V04140I DC02V04140I 1

10 MYLAR AL TAPE LCTC324010I LCTC324010I 2

11 PWR MODU(SPD32T) PK101V3340I or PK101V3350I PK101V3340I or PK101V3350I 1

12 CABINET ASSY APPE32T010I APPE32T010I 1

13 BACK COVER ASSY APPE32T020I APPE32T020I 1

14 KEY BUTTON BRAKT (32 FBPE32T010I FBPE32T010I 1

15 LCD MTG SIDE(32B6) ECPD32T050I ECPD32T050I 1

16 METAL BRACKET BOTTOM ECPE32T030I ECPE32T030I 1

17 LCD MTG SIDE(32XM6) ECPE32T040I ECPE32T040I 2

18 GROUND_SPRING (32XM6 EEPE32T010I EEPE32T010I 2

Downloaded from www.Manualslib.com manuals search engine

 19 BARRIER P-PCB LCD ELPE32T010I ELPE32T010I 1

20 SIDE AV BRACKET(32B6 FAPD32T050I FAPD32T050I 1

21 SPEAKER BRACKET(32XM FAPE32T050I FAPE32T050I 4

22 CH MOUNT BOSS(32XM6) FAPE32T060I FAPE32T060I 2

23 LOCKING CABLE TIE KA000600ZZI KA000600ZZI 1

24 SUPPORT(32XM6) LCPE32T020I LCPE32T020I 1

25 SCREW+LOCK WASHER(8) MAA8002040I MAA8002040I 6

26 SCREW MAAI30004ZI MAAI30004ZI 8

27 SCREW MAAT40001ZI MAAT40001ZI 4

28 TAPPING SCREW MAB300001ZI MAB300001ZI 8

29 TAPPING SCREW MABT40140ZI MABT40140ZI 8

30 RATING NP-TC-L32XM6 EJ4PE32000I EJ4PE32000I 1

31 CARTON-TC-L32XM6 HB4PE32011I NA 1
Change from PK28PE3200I to
32 MANUAL KITS-32XM6 PK28PE3201I PK28PE3201I
1 PK28PE3201I

33 ENERGY GUIDE-TC-L32XM6 HGPE320000I HGPE320000I 1

34 ZIPPERED BAG HK3OL77801I HK3OL77801I 1

35 PE BAG FOR TV HK3PD32001I HK3PD32001I 1

36 SCRW-SEMS-W MAA7000130I MAA7000130I 4 Type B screw

37 SCREW MAAF50001ZI MAAF50001ZI 4 Type A screw

Change from GA05009080I to
38 PWR CORD(S) GA05009160I GA05009160I 1
GA05009160I

39 REMO CTRL AA PK11V01870I PK11V01870I 1

Change from APPE32T040I to
40 PEDESTAL ASSY (32XM6) APPE32T041I APPE32T041I 1
APPE32T041I

Downloaded from www.Manualslib.com manuals search engine

 41 STAND METAL (32XM6) ECPE32T020I ECPE32T020I 1

42 EPS TR (32XM6) FJPE32T050I NA 1

43 EPS TL (32XM6) FJPE32T060I NA 1

44 EPS BR (32XM6) FJPE32T070I NA 1

45 EPS BL (32XM6) FJPE32T080I NA 1

Downloaded from www.Manualslib.com manuals search engine

 APPENDIX-A: Main assembly
SPE32 (TC-L32XM6X)
Version:02
Part Number
REF. Chassis no: SPE32T
Description Q’ty Remarks
No
Product no SPE32TMX010 Product no SPE32TMX101
SKD-PANAMEX/PAVCA
1 PCBA IR/B 454C4070L01 454C4070L01 1

2 FIRMWARE M/B 461C6270L32 461C6270L32 1

3 LCD MODU AC6VM3205R1 NA 1

4 SPK SET(90d)(PIN90d) CG100513G0I CG100513G0I 2

5 H-CON SET DC02A00130I DC02A00130I 1

6 H-CON SET DC02L00700I DC02L00700I 1

7 H-CON SET DC02P02010I DC02P02010I 1

8 H-CON SET DC02P02030I DC02P02030I 1

9 H-CON SET DC02V04140I DC02V04140I 1

10 MYLAR AL TAPE LCTC324010I LCTC324010I 2

11 PWR MODU(SPD32T) PK101V3340I or PK101V3350I PK101V3340I or PK101V3350I 1

12 CABINET ASSY APPE32T010I APPE32T011I 1

13 BACK COVER ASSY APPE32T020I APPE32T021I 1

14 KEY BUTTON BRAKT (32 FBPE32T010I FBPE32T010I 1

15 LCD MTG SIDE(32B6) ECPD32T050I ECPD32T050I 1

16 METAL BRACKET BOTTOM ECPE32T030I ECPE32T030I 1

17 LCD MTG SIDE(32XM6) ECPE32T040I ECPE32T040I 2

18 GROUND_SPRING (32XM6 EEPE32T010I EEPE32T010I 2

Downloaded from www.Manualslib.com manuals search engine

 19 BARRIER P-PCB LCD ELPE32T010I ELPE32T010I 1

20 SIDE AV BRACKET(32B6 FAPD32T050I FAPD32T050I 1

21 SPEAKER BRACKET(32XM FAPE32T050I FAPE32T050I 4

22 CH MOUNT BOSS(32XM6) FAPE32T060I FAPE32T060I 2

23 LOCKING CABLE TIE KA000600ZZI KA000600ZZI 1

24 SUPPORT(32XM6) LCPE32T020I LCPE32T020I 1

25 SCREW+LOCK WASHER(8) MAA8002040I MAA8002040I 6

26 SCREW MAAI30004ZI MAAI30004ZI 8

27 SCREW MAAT40001ZI MAAT40001ZI 4

28 TAPPING SCREW MAB300001ZI MAB300001ZI 8

29 TAPPING SCREW MABT40140ZI MABT40140ZI 8

30 RATING NP-TC-L32B6X EJ4PD32050I EJ4PD32050I 1

31 CARTON-TC-L32XM6X HB4PE32021I NA 1
Change from PK28PE3210I to
32 MANUAL KITS-32XM/39EM6X PK28PE3211I PK28PE3211I
1 PK28PE3211I

33 NA NA NA NA

34 ZIPPERED BAG HK3OL77801I HK3OL77801I 1

35 PE BAG FOR TV HK3PD32001I HK3PD32001I 1

36 SCRW-SEMS-W MAA7000130I MAA7000130I 4 Type B screw

37 SCREW MAAF50001ZI MAAF50001ZI 4 Type A screw

Change from GA18000020I to
38 PWR CORD(S) GA18000030I GA18000030I 1
GA18000030I

39 REMO CTRL AA PK11V01870I PK11V01870I 1

Change from APPE32T040I to
40 PEDESTAL ASSY (32XM6) APPE32T041I APPE32T041I 1
APPE32T041I

Downloaded from www.Manualslib.com manuals search engine

 41 STAND METAL (32XM6) ECPE32T020I ECPE32T020I 1

42 EPS TR (32XM6) FJPE32T050I NA 1

43 EPS TL (32XM6) FJPE32T060I NA 1

44 EPS BR (32XM6) FJPE32T070I NA 1

45 EPS BL (32XM6) FJPE32T080I NA 1

Downloaded from www.Manualslib.com manuals search engine

 APPENDIX-A: Main assembly
SPE32 (TC-L32XM6P)
Version:02
Part Number
REF. Chassis no: SPE32T
Description Q’ty Remarks
No
Product no SPE32TMP010 Product no SPE32TMP101
SKD-ADI
1 PCBA IR/B 454C4070L01 454C4070L01 1

2 FIRMWARE M/B 461C6270L32 461C6270L32 1

3 LCD MODU AC6VM3205R1 NA 1

4 SPK SET(90d)(PIN90d) CG100513G0I CG100513G0I 2

5 H-CON SET DC02A00130I DC02A00130I 1

6 H-CON SET DC02L00700I DC02L00700I 1

7 H-CON SET DC02P02010I DC02P02010I 1

8 H-CON SET DC02P02030I DC02P02030I 1

9 H-CON SET DC02V04140I DC02V04140I 1

10 MYLAR AL TAPE LCTC324010I LCTC324010I 2

11 PWR MODU(SPD32T) PK101V3340I or PK101V3350I PK101V3340I or PK101V3350I 1

12 CABINET ASSY APPE32T010I APPE32T010I 1

13 BACK COVER ASSY APPE32T020I APPE32T020I 1

14 KEY BUTTON BRAKT (32) FBPE32T010I FBPE32T010I 1

15 LCD MTG SIDE(32B6) ECPD32T050I ECPD32T050I 1

16 METAL BRACKET BOTTOM ECPE32T030I ECPE32T030I 1

17 LCD MTG SIDE(32XM6) ECPE32T040I ECPE32T040I 2

18 GROUND_SPRING (32XM6 EEPE32T010I EEPE32T010I 2

Downloaded from www.Manualslib.com manuals search engine

 19 BARRIER P-PCB LCD ELPE32T010I ELPE32T010I 1

20 SIDE AV BRACKET(32B6 FAPD32T050I FAPD32T050I 1

21 SPEAKER BRACKET(32XM FAPE32T050I FAPE32T050I 4

22 CH MOUNT BOSS(32XM6) FAPE32T060I FAPE32T060I 2

23 LOCKING CABLE TIE KA000600ZZI KA000600ZZI 1

24 SUPPORT(32XM6) LCPE32T020I LCPE32T020I 1

25 SCREW+LOCK WASHER(8) MAA8002040I MAA8002040I 6

26 SCREW MAAI30004ZI MAAI30004ZI 8

27 SCREW MAAT40001ZI MAAT40001ZI 4

28 TAPPING SCREW MAB300001ZI MAB300001ZI 8

29 TAPPING SCREW MABT40140ZI MABT40140ZI 8

30 RATING-TC-L32XM6P EJ4PE32040I EJ4PE32040I 1

31 CARTON-TC-L32XM6P HB4PE32031I NA 1
Change from PK28PE3220I to
32 MANUAL KITS-32XM/39E PK28PE3221I PK28PE3221I 1
PK28PE3221I

33 NA NA NA NA

34 ZIPPERED BAG HK3OL77801I HK3OL77801I 1

35 PE BAG FOR TV HK3PD32001I HK3PD32001I 1

36 SCRW-SEMS-W MAA7000130I MAA7000130I 4 Type B screw

37 SCREW MAAF50001ZI MAAF50001ZI 4 Type A screw

Change from GA18000020I to
38 PWR CORD(S) GA18000030I GA18000030I 1
GA18000030I

39 REMO CTRL AA PK11V01870I PK11V01870I 1

Change from APPE32T040I to

40 PEDESTAL ASSY (32XM6 APPE32T041I APPE32T041I 1
APPE32T041I

Downloaded from www.Manualslib.com manuals search engine

 41 STAND METAL (32XM6) ECPE32T020I ECPE32T020I 1

42 EPS TR (32XM6) FJPE32T050I NA 1

43 EPS TL (32XM6) FJPE32T060I NA 1

44 EPS BR (32XM6) FJPE32T070I NA 1

45 EPS BL (32XM6) FJPE32T080I NA 1

Downloaded from www.Manualslib.com manuals search engine

 APPENDIX-B: SPE32 Exploded View

12

17

21
4
28
22 2
18

23 18 20
22 25
6
13
15
1 7
10
8 26
9
5

17 10
19
21
28 24 28
4 11

25
14
16 27 29

26 29

Downloaded from www.Manualslib.com manuals search engine

 34
Type A 38
36
Type B

37 40

30
43

39

41 42

POP label

35
32

31

45

33

44

Downloaded from www.Manualslib.com manuals search engine

 11 Disassembly and Assembly Instructions
11.1. PEDESTAL
1. Lay down the unit so that the rear cover faces upward.

2. Remove the 4 screws.

3. Remove the Pedestal_assy

11.2. Back cover

1. Remove the 20 screws.

2. Remove the Back cover.

Downloaded from www.Manualslib.com manuals search engine

 11.3. P-Board
1. Remove the 4 screws.

2. Disconnect the connectors (P1, P2, P3)

3. Remove the P-Board.

11.4. M-Board
1. Remove the 2 screws.

2. Disconnect the connectors (M1,M2, M3,M4).

3. Remove the M-Board.

Downloaded from www.Manualslib.com manuals search engine

 11.5. Speaker unit
1. Remove the 4 screws.

2. Remove the speaker units.

11.6. IR-Board
1. Disconnect the connectors (I1).

2. Remove the IR-Board.

Downloaded from www.Manualslib.com manuals search engine

 11.7. Metal parts
1. Remove the 4 screws.

2. Remove the metal parts (M1,M2, M3,M4).

11.8. LED Panel

1. Remove the LED panel.

LED panel
Cabinet

Downloaded from www.Manualslib.com manuals search engine

 PE32T SERVICE MANUAL CHANGE LIST
DATE Page VERSION CHANGE ITEM
10 / Jan. 2013 49-54 01 Update the APPENDIX Screw type
27 / Feb. 2013 49-57 02 Update the APPENDIX parts list

Downloaded from www.Manualslib.com manuals search engine